[Gelöst] Fehler bei node red auf dem slave

mcm1957

@hant0r said in [gelöst] Cannot read file "jsonConfig.json: Not exists:

@mcm1957 sagte in [gelöst] Cannot read file "jsonConfig.json: Not exists:

@hant0r
Bitte sichere dein Instanzpbhekt und poste es hier. Falls bei dir derselbe Blödsinn drinnen steht wär sas zumindest auffällig.

Bei mir steht das hier drin:
{
  "_id": "node-red.0",
  "type": "channel",
  "common": {
    "name": "States created by node-red.0",
    "role": "info"
  },
  "native": {},
  "from": "system.adapter.node-red.0",
  "ts": 1709225737746,
  "acl": {
    "object": 1636,
    "owner": "system.user.admin",
    "ownerGroup": "system.group.administrator"
  },
  "user": "system.user.admin"
}

Das ist leider nicht das Ganze object.
schau mal da

https://forum.iobroker.net/topic/78441/gelöst-cannot-read-file-jsonconfig-json-not-exists/6

da muss noch mehr config drinnen sein.

Sorry hab im Moment nur Handy...

Hant0r

@mcm1957 hätte ich auch gedacht.
Im Ordner node-red.0 ist aber nur das

mcm1957

@hant0r said in [gelöst] Cannot read file "jsonConfig.json: Not exists:

@mcm1957 hätte ich auch gedacht.
Im Ordner node-red.0 ist aber nur das

Die INstanzconfig bekommst du im EXPERT Mode unter system->adapter->node-red-> 0 und dort rechst den Schraubenschlüssel:

Ist aber egal. Node-red benutzt jsonConfig und damit ist dein Problem definitiv nicht mit dem von @Thomas Braun vergleichbar (außer von der Meldung her.

Versuch mal ein explizites Upload. Alternativ eine Reinstallation des Adapters.

Hant0r

@mcm1957 sagte in [gelöst] Cannot read file "jsonConfig.json: Not exists:

Die INstanzconfig bekommst du im EXPERT Mode unter system->adapter->node-red-> 0 und dort rechst den Schraubenschlüssel:

Genau so hatte ich es gemacht

Habe jetzt mal versucht den Adapter neu zu installieren. Alleine die Instanz zu löschen und wieder zu installieren brachte keinen Erfolg.
Als ich den Adapter löschen wollte kommt folgende Meldung

Error deleting adapter node-red from disk: Cannot find module 'iobroker.node-red/io-package.json'Require stack:- /opt/iobroker/node_modules/@iobroker/js-controller-cli/build/esm/lib/setup/setupInstall.jsYou might have to delete it yourself!

mcm1957

@hant0r
Schätze da ist mehr faul. Wahrscheinlich kann dir @Thomas-Braun da helfen. Ob in diesem Topic oder abgespaltet kann ich nicht sagen.

In jeden Fall wär mal die Langdassung von iob diag sinnvoll

Hant0r

@mcm1957
Hmm, also mein Node-Red läuft auf meinem Slave ioBroker.
Wollte dort mal gerade das diag log machen, aber es startet dort auch nicht

*** iob diag is starting up, please wait ***
iob diag needs to be updated. Please execute 'iobroker fix' first.

den Fix habe ich aber schon gemacht

...
==========================================================================
    Checking autostart (5/5)
==========================================================================

==== AUTHENTICATING FOR org.freedesktop.systemd1.manage-units ===
Legitimierung ist zum Stoppen von »iobroker.service« notwendig.
Authenticating as: ,,, (pi)
Password: polkit-agent-helper-1: pam_authenticate failed: Authentication failure
Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

Thomas Braun

@hant0r

Für iob diag maldie Testversion davon verwenden.

Homoran

Ich hab das mal abgetrennt!

@hant0r sagte in Fehler bei node red auf dem slave:

das selbe Problem

ist es nicht!

Bitte provisorischen Threadtitel sinnvoll anpassen

Hant0r

@thomas-braun sagte in [gelöst] Cannot read file "jsonConfig.json: Not exists:

@hant0r

Für iob diag maldie Testversion davon verwenden.

Das Script aus deinem Footer?

curl -sLf -o diag.sh https://iobroker.net/diag.sh && bash diag.sh

Führt zum selben Ergebnis wie oben

EDIT:
Habe es hier gefunden: https://forum.iobroker.net/topic/59549/iob-diag-skript

Hant0r

Diag-Test läuft auf einen Fehler im Script:

pi@iobroker-slave:~ $ ./iob_diag.sh > iob_diag.log
The state system.host.iobroker-slave.versions.nodeNewestNext was not found!
The state system.host.iobroker-slave.versions.npmNewestNext was not found!
npm error code ELSPROBLEMS
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.alexa2/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.backitup/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.info/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.node-red/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.openknx/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.smartmeter/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.spritmonitor/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.tibberconnect/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.vw-connect/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.zigbee/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/@iobroker/socket-classes/node_modules/@iobroker/adapter-core
npm error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/@iobroker/dm-utils/node_modules/@iobroker/adapter-core
npm error A complete log of this run can be found in: /home/pi/.npm/_logs/2024-12-08T10_22_26_082Z-debug-0.log
./iob_diag.sh: line 1259: syntax error: unexpected end of file

0 verbose cli /usr/bin/node /usr/bin/npm
1 info using npm@10.8.2
2 info using node@v20.18.1
3 silly config load:file:/usr/lib/node_modules/npm/npmrc
4 silly config load:file:/opt/iobroker/.npmrc
5 silly config load:file:/home/pi/.npmrc
6 silly config load:file:/usr/etc/npmrc
7 verbose title npm ls
8 verbose argv "ls" "--all"
9 verbose logfile logs-max:10 dir:/home/pi/.npm/_logs/2024-12-08T10_22_26_082Z-
10 verbose logfile /home/pi/.npm/_logs/2024-12-08T10_22_26_082Z-debug-0.log
11 silly packumentCache heap:248512512 maxSize:62128128 maxEntrySize:31064064
12 silly logfile start cleaning logs, removing 1 files
13 silly logfile done cleaning log files
14 verbose shrinkwrap failed to load node_modules/.package-lock.json out of date, updated: node_modules/iobroker.js-controller
15 verbose stack Error: invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.alexa2/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.backitup/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.info/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.node-red/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.openknx/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.smartmeter/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.spritmonitor/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.tibberconnect/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.vw-connect/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.zigbee/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/@iobroker/socket-classes/node_modules/@iobroker/adapter-core
15 verbose stack invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/@iobroker/dm-utils/node_modules/@iobroker/adapter-core
15 verbose stack     at LS.exec (/usr/lib/node_modules/npm/lib/commands/ls.js:206:9)
15 verbose stack     at async Npm.exec (/usr/lib/node_modules/npm/lib/npm.js:207:9)
15 verbose stack     at async module.exports (/usr/lib/node_modules/npm/lib/cli/entry.js:74:5)
16 error code ELSPROBLEMS
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.admin/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.alexa2/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.backitup/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.info/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.node-red/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.openknx/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.smartmeter/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.spritmonitor/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.tibberconnect/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.vw-connect/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/iobroker.zigbee/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/@iobroker/socket-classes/node_modules/@iobroker/adapter-core
17 error invalid: @iobroker/adapter-core@3.1.6 /opt/iobroker/node_modules/@iobroker/dm-utils/node_modules/@iobroker/adapter-core
18 verbose cwd /opt/iobroker
19 verbose os Linux 5.10.103-v7+
20 verbose node v20.18.1
21 verbose npm  v10.8.2
22 verbose exit 1
23 verbose code 1
24 error A complete log of this run can be found in: /home/pi/.npm/_logs/2024-12-08T10_22_26_082Z-debug-0.log

Thomas Braun

@hant0r Das ist aber nichts im Skript, da klemmt es auf deinem System.

Hant0r

@thomas-braun sagte in Fehler bei node red auf dem slave:

@hant0r Das ist aber nichts im Skript, da klemmt es auf deinem System.

Will ich gar nichr ausschließen, bin mir aber nicht sicher was und wo ich suchen sollte.

In dem Log werden auch Adapter aufgelistet, die gar nicht auf dem Slave System installiert sind.

Thomas Braun

@hant0r

Wobei, ich sehe gerade, im Skript ist ein Fehler drin. Muss ich später noch einmal schauen.

Thomas Braun

@hant0r

Schau mal ob das Skript nun durch läuft.
Nochmal neu curlen.

Hant0r

@thomas-braun sagte in Fehler bei node red auf dem slave:

@hant0r

Schau mal ob das Skript nun durch läuft.
Nochmal neu curlen.

Jap, hat nun geklappt, danke!

Hier das diag-log

========== Start marking the full check here ===========

bash
Script v.2024-12-08 Raspbian+zigbee diag+masking

*** BASE SYSTEM ***
   Static hostname: iobroker-slave
         Icon name: computer
  Operating System: Raspbian GNU/Linux 11 (bullseye)
            Kernel: Linux 5.10.103-v7+
      Architecture: arm
OS is similar to: debian

Model           : Raspberry Pi 3 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : 32 bit

Systemuptime and Load:
 20:12:04 up 1 day,  1:55,  1 user,  load average: 0.35, 0.10, 0.03
CPU threads: 4


*** LIFE CYCLE STATUS ***
Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sun 2024-12-08 20:12:04 CET
           Universal time: Sun 2024-12-08 19:12:04 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CET, +0100)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
pi
HOME=/home/pi
GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server: false
Desktop:
Terminal:       tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            923M        314M         76M        0.0K        531M        543M
Swap:            99M         11M         88M
Total:          1.0G        326M        165M

Active iob-Instances:   41

          923 M total memory
          314 M used memory
          280 M active memory
          435 M inactive memory
           76 M free memory
          144 M buffer memory
          387 M swap cache
           99 M total swap
           11 M used swap
           88 M free swap

*** top - Table Of Processes  ***
top - 20:12:05 up 1 day,  1:55,  1 user,  load average: 0.35, 0.10, 0.03
Tasks: 119 total,   1 running, 118 sleeping,   0 stopped,   0 zombie
%Cpu(s):  2.7 us,  2.7 sy,  0.0 ni, 94.7 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :    923.2 total,     76.7 free,    314.6 used,    531.9 buff/cache
MiB Swap:    100.0 total,     88.5 free,     11.5 used.    544.1 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4       15G  7.0G  6.8G  51% /
devtmpfs       devtmpfs  430M     0  430M   0% /dev
tmpfs          tmpfs     462M     0  462M   0% /dev/shm
tmpfs          tmpfs     185M  576K  185M   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/mmcblk0p1 vfat      253M   49M  204M  20% /boot
tmpfs          tmpfs      93M     0   93M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sat Dec  7 18:16:25 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000  console=ttyS0,115200 console=tty1 root=PARTUUID=2d24dc3a-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Sat Dec  7 18:16:28 2024] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Sat Dec  7 18:16:28 2024] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Sat Dec  7 18:16:32 2024] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)

Show mounted filesystems:
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/mmcblk0p2 ext4   rw,noatime
`-/boot /dev/mmcblk0p1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.4G    /var/
1.3G    /var/log/journal/6a1c6c0717794655a35c1e054c8a353a
1.3G    /var/log/journal
1.3G    /var/log
855M    /var/cache

Archived and active journals take up 1.2G in the file system.

/opt/iobroker/backups:
452M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
132M    /opt/iobroker/iobroker-data/
121M    /opt/iobroker/iobroker-data/node-red
120M    /opt/iobroker/iobroker-data/node-red/node_modules
19M     /opt/iobroker/iobroker-data/node-red/node_modules/node-red-contrib-virtual-smart-home/node_modules
19M     /opt/iobroker/iobroker-data/node-red/node_modules/node-red-contrib-virtual-smart-home

The five largest files in iobroker-data are:
1.9M    /opt/iobroker/iobroker-data/objects.jsonl
1.9M    /opt/iobroker/iobroker-data/objects.json.migrated
1.9M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
748K    /opt/iobroker/iobroker-data/node-red/node_modules/node-red-contrib-virtual-smart-home/node_modules/mqtt/dist/mqtt.js
584K    /opt/iobroker/iobroker-data/node-red/node_modules/node-red-contrib-modbus/modbus/icons/modbus.ico

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_527b0af45d29ec11a9796d7840c9ce8d-if00-port0

*** ZigBee Settings ***

HINT:
Your zigbee.0 COM-Port is NOT matching 'by-id'. Please check your setting:
/dev/ttyUSB0
Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.0
Extended Pan ID:
*** MASKED ***
OR
*** MASKED ***

Pan ID:
*** MASKED ***

Channel:
*** MASKED ***
Network Key:
*** MASKED ***

*** NodeJS-Installation ***

/usr/bin/nodejs         v20.18.1
/usr/bin/node           v20.18.1
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.4

nodejs:
  Installed: 20.18.1-1nodesource1
  Candidate: 20.18.1-1nodesource1
  Version table:
 *** 20.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     20.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     20.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_20.x nodistro/main armhf Packages
     12.22.12~dfsg-1~deb11u5 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.

At least one iobroker host is running.

Objects type: jsonl
States  type: jsonl

Hosts:
ioBroker            ioBroker (version: 7.0.3, hostname: ioBroker      , alive, uptime: 94728)
iobroker-slave      iobroker-slave (version: 7.0.3, hostname: iobroker-slave, alive, uptime: 33741)

Core adapters versions
js-controller:  7.0.3
admin:          7.1.5
javascript:     "javascript" not found

nodejs modules from github:     3
+-- iobroker.spritmonitor@0.0.2-beta.4 (git+ssh://git@github.com/ice987987/ioBroker.spritmonitor.git#23065c8af34346cefc0cf5586fe2cc4eaf80962d)
+-- iobroker.tibberconnect@0.0.10 (git+ssh://git@github.com/Codibris/ioBroker.tibberconnect.git#3d3cb4129718fbaf00fcdc00b23d1a68e35d2c83)
+-- iobroker.vw-connect@0.1.0 (git+ssh://git@github.com/ta2k/ioBroker.vw-connect.git#610c38af4b66cbc2875b03154da09059554c913a)

Adapter State
+ system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : ioBroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : ioBroker                                 -  enabled
+ system.adapter.backitup.1               : backitup              : iobroker-slave                           -  enabled
  system.adapter.cameras.0                : cameras               : ioBroker                                 - disabled, port: 8200, bind: 127.0.0.1
  system.adapter.daswetter.0              : daswetter             : ioBroker                                 -  enabled
  system.adapter.device-reminder.0        : device-reminder       : ioBroker                                 - disabled
  system.adapter.devices.0                : devices               : iobroker-slave                           - disabled
+ system.adapter.doorbird.0               : doorbird              : ioBroker                                 -  enabled
  system.adapter.dysonairpurifier.0       : dysonairpurifier      : ioBroker                                 - disabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: ioBroker                                 -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : ioBroker                                 -  enabled
+ system.adapter.followthesun.0           : followthesun          : ioBroker                                 -  enabled
+ system.adapter.hs100.0                  : hs100                 : ioBroker                                 -  enabled
+ system.adapter.hue.0                    : hue                   : ioBroker                                 -  enabled, port: 443
  system.adapter.ical.0                   : ical                  : ioBroker                                 -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : ioBroker                                 - disabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : ioBroker                                 - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : ioBroker                                 - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: ioBroker                                 - disabled
+ system.adapter.influxdb.0               : influxdb              : ioBroker                                 -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : ioBroker                                 -  enabled, port: 8086
+ system.adapter.jablotron.0              : jablotron             : ioBroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : ioBroker                                 -  enabled
  system.adapter.mbus.0                   : mbus                  : ioBroker                                 - disabled, port: 3493
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.1          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
  system.adapter.modbus.0                 : modbus                : ioBroker                                 - disabled
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : iobroker-slave                           -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.nut.0                    : nut                   : ioBroker                                 -  enabled
+ system.adapter.openknx.0                : openknx               : ioBroker                                 -  enabled
  system.adapter.openweathermap.0         : openweathermap        : ioBroker                                 -  enabled
+ system.adapter.ping.0                   : ping                  : ioBroker                                 -  enabled
+ system.adapter.pushover.0               : pushover              : ioBroker                                 -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : ioBroker                                 -  enabled
+ system.adapter.shelly.0                 : shelly                : ioBroker                                 -  enabled, port: 1882, bind: 10.1.1.5
+ system.adapter.simple-api.0             : simple-api            : ioBroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.smartmeter.0             : smartmeter            : ioBroker                                 -  enabled
+ system.adapter.sonos.0                  : sonos                 : ioBroker                                 -  enabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : ioBroker                                 -  enabled
+ system.adapter.spritmonitor.0           : spritmonitor          : ioBroker                                 -  enabled
+ system.adapter.tapo.0                   : tapo                  : ioBroker                                 -  enabled
+ system.adapter.telegram.0               : telegram              : ioBroker                                 -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.text2command.0           : text2command          : ioBroker                                 - disabled
+ system.adapter.tibberlink.0             : tibberlink            : ioBroker                                 -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : ioBroker                                 -  enabled
+ system.adapter.tuya.0                   : tuya                  : ioBroker                                 -  enabled
+ system.adapter.unifi.0                  : unifi                 : ioBroker                                 -  enabled
+ system.adapter.viessmannapi.0           : viessmannapi          : ioBroker                                 -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : ioBroker                                 - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : ioBroker                                 - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : ioBroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : ioBroker                                 - disabled
  system.adapter.vis-material-webfont.0   : vis-material-webfont  : ioBroker                                 - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : ioBroker                                 - disabled
  system.adapter.vis-metro.0              : vis-metro             : ioBroker                                 - disabled
  system.adapter.vis-players.0            : vis-players           : ioBroker                                 - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : ioBroker                                 - disabled
  system.adapter.vis.0                    : vis                   : ioBroker                                 -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : ioBroker                                 -  enabled
+ system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker-slave                           -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hue.0                    : hue                   : ioBroker                                 -  enabled, port: 443
+ system.adapter.influxdb.0               : influxdb              : ioBroker                                 -  enabled, port: 8086
+ system.adapter.influxdb.1               : influxdb              : ioBroker                                 -  enabled, port: 8086
+ system.adapter.mihome-vacuum.0          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mihome-vacuum.1          : mihome-vacuum         : ioBroker                                 -  enabled, port: 54321
+ system.adapter.mqtt.0                   : mqtt                  : ioBroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : iobroker-slave                           -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : ioBroker                                 -  enabled, port: 1882, bind: 10.1.1.5
+ system.adapter.simple-api.0             : simple-api            : ioBroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.telegram.0               : telegram              : ioBroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker-slave                           -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
┌────────────────────────────────────────────────────────────────────────────────────────────────────────
│ (index) │ name               │ url                                                     │ auto upgrade │
├────────────────────────────────────────────────────────────────────────────────────────────────────────
│ 0       │ 'Stable (default)' │ 'http://download.iobroker.net/sources-dist.json'        │ true         │
│ 1       │ 'Beta (latest)'    │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
│ 2       │ 'List'             │ 'http://download.iobroker.net/list.html'                │ false        │
└────────────────────────────────────────────────────────────────────────────────────────────────────────

Active repo(s): Stable (default)
Upgrade policy: patch

Installed ioBroker-Instances
Used repository: Stable (default)
Adapter    "admin"        : 7.1.5    , installed 7.1.5
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "backitup"     : 3.0.25   , installed 3.0.25
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Controller "js-controller": 7.0.3    , installed 7.0.3
Adapter    "node-red"     : 5.2.1    , installed 5.2.1
Adapter    "openknx"      : 0.9.0    , installed 0.7.2  [Updatable]
Adapter    "smartmeter"   : 3.4.0    , installed 3.4.0
Adapter    "zigbee"       : 1.10.3   , installed 1.10.3

Objects and States
Please stand by - This may take a while
Objects:        26963
States:         23283

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 https://deb.nodesource.com/node_20.x nodistro InRelease
Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Reading package lists... Done
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          12542      581/sshd: /usr/sbin
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       55437      4330/node-red
tcp6       0      0 :::80                   :::*                    LISTEN      1001       55438      4330/node-red
tcp6       0      0 :::22                   :::*                    LISTEN      0          10073      581/sshd: /usr/sbin
tcp6       0      0 :::20000                :::*                    LISTEN      1001       55440      4330/node-red
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          10717      573/dhcpcd
udp        0      0 0.0.0.0:51301           0.0.0.0:*                           108        10663      306/avahi-daemon: r
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        10661      306/avahi-daemon: r
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       55442      4330/node-red
udp6       0      0 :::38107                :::*                                108        10664      306/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        10662      306/avahi-daemon: r

*** Log File - Last 25 Lines ***

2024-12-08 10:50:19.612  - info: node-red.0 (4293) Starting node-red: --max-old-space-size=128 /opt/iobroker/node_modules/node-red/red.js -v --settings /opt/iobroker/iobroker-data/node-red/settings.js
2024-12-08 10:50:19.628  - info: node-red.0 (4293) Node-RED started successfully (PID: 4330)
2024-12-08 10:50:28.130  - info: zigbee.0 (4319) starting. Version 1.10.3 in /opt/iobroker/node_modules/iobroker.zigbee, node: v20.18.1, js-controller: 7.0.3
2024-12-08 10:50:28.302  - info: zigbee.0 (4319) delete old Backup files. keep only last 10
2024-12-08 10:50:28.306  - info: zigbee.0 (4319) Starting Zigbee  npm ...
2024-12-08 10:50:29.172  - info: zigbee.0 (4319) Installed Version: iobroker.zigbee@1.10.3
2024-12-08 10:50:30.765  - info: zigbee.0 (4319) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20220219}}
2024-12-08 10:50:30.782  - info: zigbee.0 (4319) Unable to disable LED, unsupported function.
2024-12-08 10:50:30.824  - info: zigbee.0 (4319)   --> transmitPower : high
2024-12-08 10:50:30.848  - info: zigbee.0 (4319) Currently 10 devices are joined:
2024-12-08 10:50:31.035  - info: zigbee.0 (4319) 0x00158d00054bf061 (addr 22089): RTCGQ11LM - Aqara Motion sensor (EndDevice)
2024-12-08 10:50:31.046  - info: zigbee.0 (4319) 0x00158d0002a216d7 (addr 41996): MCCGQ11LM - Aqara Door and window sensor (EndDevice)
2024-12-08 10:50:31.052  - info: zigbee.0 (4319) 0x00158d0002b7b5e1 (addr 14656): DJT11LM - Aqara Vibration sensor (EndDevice)
2024-12-08 10:50:31.057  - info: zigbee.0 (4319) 0x00158d00054d161b (addr 55732): RTCGQ11LM - Aqara Motion sensor (EndDevice)
2024-12-08 10:50:31.061  - info: zigbee.0 (4319) 0x00158d0009f4249e (addr 42548): MCCGQ11LM - Aqara Door and window sensor (EndDevice)
2024-12-08 10:50:31.065  - info: zigbee.0 (4319) 0x00158d000644472e (addr 59828): RTCGQ11LM - Aqara Motion sensor (EndDevice)
2024-12-08 10:50:31.070  - info: zigbee.0 (4319) 0x00158d0006693825 (addr 29733): RTCGQ11LM - Aqara Motion sensor (EndDevice)
2024-12-08 10:50:31.074  - info: zigbee.0 (4319) 0x00158d0006586493 (addr 61285): RTCGQ11LM - Aqara Motion sensor (EndDevice)
2024-12-08 10:50:31.079  - info: zigbee.0 (4319) 0x00158d00066980b6 (addr 42580): RTCGQ11LM - Aqara Motion sensor (EndDevice)
2024-12-08 10:50:31.082  - info: zigbee.0 (4319) 0x00158d00024ece71 (addr 406): MCCGQ11LM - Aqara Door and window sensor (EndDevice)
2024-12-08 10:50:31.085  - info: zigbee.0 (4319) Zigbee started
2024-12-08 10:50:31.205  - info: zigbee.0 (4319) deregister device Ping for deactivated device "0x00158d0002a216d7"
2024-12-08 10:50:31.233  - info: zigbee.0 (4319) debug devices set to []
2024-12-08 10:50:34.956  - warn: node-red.0 (4293) Node-RED: 8 Dec 10:50:34 - [warn] Projekte deaktiviert: editorTheme.projects.enabled=false
2024-12-08 19:44:36.546  - info: zigbee.0 (4319) Device '0x00158d00066980b6' announced itself
 
============ Mark until here for C&P =============
 
iob diag has finished.

======================= SUMMARY =======================
                       v.2024-12-08 Raspbian+zigbee diag+masking


  Static hostname: iobroker-slave
        Icon name: computer
 Operating System: Raspbian GNU/Linux 11 (bullseye)
           Kernel: Linux 5.10.103-v7+
     Architecture: arm

Installation:           native
Kernel:                 armv7l
Userland:               32 bit
Timezone:               Europe/Berlin (CET, +0100)
User-ID:                1000
Display-Server:         false
Boot Target:            multi-user.target

Pending OS-Updates:     0
Pending iob updates:    1

Nodejs-Installation:
/usr/bin/nodejs         v20.18.1
/usr/bin/node           v20.18.1
/usr/bin/npm            10.8.2
/usr/bin/npx            10.8.2
/usr/bin/corepack       0.29.4

Recommended versions are nodejs  and npm
nodeJS installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:            923M        316M        111M        0.0K        495M        542M
Swap:            99M         11M         88M
Total:          1.0G        327M        200M

Active iob-Instances:   41
Upgrade policy: patch

ioBroker Core:          js-controller           7.0.3
                       admin                   7.1.5

ioBroker Status:        iobroker is running on this host.

At least one iobroker host is running.

Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : ioBroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : ioBroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                26963
States:                 23283

Size of iob-Database:

1.9M    /opt/iobroker/iobroker-data/objects.jsonl
1.9M    /opt/iobroker/iobroker-data/objects.json.migrated
1.9M    /opt/iobroker/iobroker-data/objects.json.bak.migrated
244K    /opt/iobroker/iobroker-data/states.jsonl
240K    /opt/iobroker/iobroker-data/states.json.migrated
240K    /opt/iobroker/iobroker-data/states.json.bak.migrated


Debian 'bullseye' is the current oldstable version. Please upgrade to the latest stable release 'bookworm' in due time!

=================== END OF SUMMARY ====================

Thomas Braun

@hant0r

Installier da mal das OS von Grund auf neu.
In der 64Bit-Lite-Version.
Dann auch mit einem eigenen user, nicht 'pi'.

Zu node-red springt mir halt

warn: node-red.0 (4293) Node-RED: 8 Dec 10:50:34 - [warn] Projekte deaktiviert: editorTheme.projects.enabled=false

ins Auge. Ohne das ich wüsste wo man Projekte wieder aktiviert.

mickym

@thomas-braun Das ist eine normale Fehlermeldung die man ignorieren kann. In der Regel lässt man die Projekte in NodeRed deaktiviert. Warum es diese Meldung seit ewigen Zeiten gibt, kann mir bis jetzt keiner erklären. Ich habe eine Instanz mit und ohne Projekte am Laufen.

Thomas Braun

@mickym

Okay.

Hant0r

@thomas-braun sagte in Fehler bei node red auf dem slave:

@hant0r

Installier da mal das OS von Grund auf neu.
In der 64Bit-Lite-Version.
Dann auch mit einem eigenen user, nicht 'pi'.

Hmm ok... Wundert mich nur, dass es plötzlich so Probleme macht. Immerhin lief es vier Jahre.

Da ich kein Linux crack bin, muss ich mal nach ner Anleitungen suchen, wo erklärt wird, wie man das System 'richtig' installiert. Denke 'iob backup' bzw. Backitup sollten als Sicherung ausreichen um alles wieder herzustellen, oder?
Kennt jemand von euch ne gute Anleitung?

Thomas Braun

@hant0r

https://forum.iobroker.net/topic/51869/installation-auf-raspi-einfacher-geht-s-nicht

NEWS

[Gelöst] Fehler bei node red auf dem slave

Support us

864
Online

31.7k
Users

79.8k
Topics

1.3m
Posts

NEWS

[Gelöst] Fehler bei node red auf dem slave

Support us

864Online

31.7kUsers

79.8kTopics

1.3mPosts

864
Online

31.7k
Users

79.8k
Topics

1.3m
Posts