IOBroker Restore History Daten Problem

fastfoot

@cappy_451 iob fix ändert nicht die Berechtigungen für Ordner, mach mal
chmod 775 /opt/iobroker/iobroker-data/history

? Offline

was machst du da.. NIEMALS als root einloggen, das verbiegt dir alle Rechte .. :(
Leg einen user an, gib ihm root rechte, und dann stimmt das, man arbeitet dann mit sudo und gut ist..

cappy_451

Hallo,

ich habe nun einen user mit root rechten angelegt und mich mit dem eingelogt.

nach

sudo chmod 775 /opt/iobroker/iobroker-data/history sieht das mit den Rechten so aus

drwxrwxr-x+ 3 iobroker iobroker 4096 Jul 15 22:00 history

Dann versucht das Backup (Historische Daten) zurückzuspielen, dann sieht es so aus.

drw-r--r--+ 3 iobroker iobroker 4096 Jul 15 22:00 history

Da sind die Schreibrechte nicht mehr da. Restore hat auch wieder mit Fehler abgebrochen.

Thomas Braun

@cappy_451 sagte in IOBroker Restore History Daten Problem:

Da sind die Schreibrechte nicht mehr da.

Da liegen ACLs drauf. Die Rechte kannst du da nicht mit ls -l ablesen.

getfacl  /opt/iobroker/iobroker-data/history

Wo/wie kommt die Windows auf das System? Gemountete Freigabe? Von Hand irgendwie herüber kopiert?

Thomas Braun

@cappy_451 sagte in IOBroker Restore History Daten Problem:

ich habe nun einen user mit root rechten angelegt und mich mit dem eingelogt.

Und in welchen Gruppen ist der nun drin?

Gib mal die Langfassung von

iob diag

bekannt, damit man mal einen Überblick über dein System bekommt.

cappy_451

Nur noch mal zur Info, ich benutze seit zwei Jahren IOBroker auf einem Windows Rechner und möchte dies nun umziehen auf ein Linux System welches unter Proxmox läuft.

Von meinem Windows Iobroker habe ich mit dem Backup Adapter ein Backup gemacht, Konfiguration und auch Historische Daten.

Der "Linux" Iobroker ist installiert und läuft auch, Die Konfiguration habe ich mit dem backup Adapter wiederhergestellt, nun scheitere ich beim wiederherstellend er historischen Daten.

Hier die Diagnose Daten vom System

Skript v.2024-05-22

*** BASE SYSTEM ***
 Static hostname: Iobroker
       Icon name: computer-container
         Chassis: container
  Virtualization: lxc
Operating System: Ubuntu 22.04.4 LTS
          Kernel: Linux 6.5.11-8-pve
    Architecture: x86-64

model name      : Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 09:30:15 up 15 min,  3 users,  load average: 0.12, 0.09, 0.24
CPU threads: 2


*** Time and Time Zones ***
               Local time: Wed 2024-07-17 09:30:15 UTC
           Universal time: Wed 2024-07-17 09:30:15 UTC
                 RTC time: n/a
                Time zone: Etc/UTC (UTC, +0000)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
root
HOME=/root
GROUPS=root

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** Display-Server-Setup ***
Display-Server: false
Desktop: 
Terminal: 
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.1G        536M        3.3G        0.0K        223M        3.6G
Swap:           4.1G          0B        4.1G
Total:          8.2G        536M        7.4G

Active iob-Instances:   6

         4096 M total memory
          536 M used memory
          609 M active memory
          107 M inactive memory
         3336 M free memory
            0 M buffer memory
          223 M swap cache
         4096 M total swap
            0 M used swap
         4096 M free swap

*** top - Table Of Processes  ***
top - 09:30:15 up 15 min,  3 users,  load average: 0.12, 0.09, 0.24
Tasks:  35 total,   1 running,  34 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  3.2 sy,  0.0 ni, 96.8 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   4096.0 total,   3335.9 free,    536.5 used,    223.7 buff/cache
MiB Swap:   4096.0 total,   4096.0 free,      0.0 used.   3559.5 avail Mem 

*** FAILED SERVICES ***

  UNIT                 LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount loaded failed failed RPC Pipe File System

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem                       Type      Size  Used Avail Use% Mounted on
/dev/mapper/pve-vm--245--disk--0 ext4       30G  4.3G   24G  16% /
none                             tmpfs     492K  4.0K  488K   1% /dev
efivarfs                         efivarfs  128K  125K     0 100% /sys/firmware/efi/efivars
tmpfs                            tmpfs     7.8G     0  7.8G   0% /dev/shm
tmpfs                            tmpfs     3.1G  112K  3.1G   1% /run
tmpfs                            tmpfs     5.0M     0  5.0M   0% /run/lock

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET                                        SOURCE                           FSTYPE      OPTIONS
/                                             /dev/mapper/pve-vm--245--disk--0 ext4        rw,relatime,stripe=16
|-/run                                        tmpfs                            tmpfs       rw,nosuid,nodev,size=3249876k,nr_inodes=819200,mode=755,uid=100000,gid=100000,inode64
| |-/run/lock                                 tmpfs                            tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k,uid=100000,gid=100000,inode64
| `-/run/credentials/systemd-sysusers.service ramfs                            ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
|-/dev                                        none                             tmpfs       rw,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64
| |-/dev/shm                                  tmpfs                            tmpfs       rw,nosuid,nodev,uid=100000,gid=100000,inode64
| |-/dev/mqueue                               mqueue                           mqueue      rw,relatime
| |-/dev/.lxc/proc                            proc                             proc        rw,relatime
| |-/dev/.lxc/sys                             sys                              sysfs       rw,relatime
| |-/dev/full                                 udev[/full]                      devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/null                                 udev[/null]                      devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/random                               udev[/random]                    devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/tty                                  udev[/tty]                       devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/urandom                              udev[/urandom]                   devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/zero                                 udev[/zero]                      devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/pts                                  devpts                           devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
| |-/dev/ptmx                                 devpts[/ptmx]                    devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
| |-/dev/console                              devpts[/0]                       devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
| |-/dev/tty1                                 devpts[/1]                       devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
| `-/dev/tty2                                 devpts[/2]                       devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
|-/proc                                       proc                             proc        rw,nosuid,nodev,noexec,relatime
| |-/proc/sys                                 proc[/sys]                       proc        ro,relatime
| | |-/proc/sys/net                           proc[/sys/net]                   proc        rw,nosuid,nodev,noexec,relatime
| | |-/proc/sys/fs/binfmt_misc                binfmt_misc                      binfmt_misc rw,nosuid,nodev,noexec,relatime
| | `-/proc/sys/kernel/random/boot_id         none[/.lxc-boot-id]              tmpfs       ro,nosuid,nodev,noexec,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64
| |-/proc/sysrq-trigger                       proc[/sysrq-trigger]             proc        ro,relatime
| |-/proc/cpuinfo                             lxcfs[/proc/cpuinfo]             fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/diskstats                           lxcfs[/proc/diskstats]           fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/loadavg                             lxcfs[/proc/loadavg]             fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/meminfo                             lxcfs[/proc/meminfo]             fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/slabinfo                            lxcfs[/proc/slabinfo]            fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/stat                                lxcfs[/proc/stat]                fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/swaps                               lxcfs[/proc/swaps]               fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| `-/proc/uptime                              lxcfs[/proc/uptime]              fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
`-/sys                                        sysfs                            sysfs       ro,nosuid,nodev,noexec,relatime
  |-/sys/fs/fuse/connections                  fusectl                          fusectl     rw,nosuid,nodev,noexec,relatime
  |-/sys/devices/virtual/net                  sysfs[/devices/virtual/net]      sysfs       rw,nosuid,nodev,noexec,relatime
  |-/sys/kernel/debug                         debugfs                          debugfs     rw,nosuid,nodev,noexec,relatime
  |-/sys/kernel/security                      securityfs                       securityfs  rw,nosuid,nodev,noexec,relatime
  |-/sys/fs/pstore                            pstore                           pstore      rw,nosuid,nodev,noexec,relatime
  |-/sys/firmware/efi/efivars                 efivarfs                         efivarfs    rw,nosuid,nodev,noexec,relatime
  |-/sys/fs/cgroup                            none                             cgroup2     rw,nosuid,nodev,noexec,relatime
  `-/sys/devices/system/cpu                   lxcfs[/sys/devices/system/cpu]   fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other

Files in neuralgic directories:

/var:
699M    /var/
365M    /var/cache
359M    /var/cache/apt
284M    /var/lib
260M    /var/cache/apt/archives

Archived and active journals take up 48.0M in the file system.

/opt/iobroker/backups:
397M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
593M    /opt/iobroker/iobroker-data/
468M    /opt/iobroker/iobroker-data/files
142M    /opt/iobroker/iobroker-data/files/vis-2
89M     /opt/iobroker/iobroker-data/files/echarts.admin
87M     /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
34M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'




*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.4
/usr/bin/node           v18.20.4
/usr/bin/npm            10.7.0
/usr/bin/npx            10.7.0
/usr/bin/corepack       0.28.0


nodejs:
  Installed: 18.20.4-1nodesource1
  Candidate: 18.20.4-1nodesource1
  Version table:
 *** 18.20.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     18.20.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     12.22.9~dfsg-1ubuntu3.6 500
        500 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages
        500 http://archive.ubuntu.com/ubuntu jammy-security/universe amd64 Packages
     12.22.9~dfsg-1ubuntu3 500
        500 http://archive.ubuntu.com/ubuntu jammy/universe amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.1.6

nodejs modules from github:     2
| +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0)
+-- iobroker.vr200@1.1.0 (git+ssh://git@github.com/Eisbaeeer/ioBroker.vr200.git#e55ff645b6a6d6b12e23535b15b81a0de68ee676)

Adapter State
+ system.adapter.admin.0                  : admin                 : Iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : Iobroker                                 -  enabled
  system.adapter.discovery.0              : discovery             : Iobroker                                 - disabled
  system.adapter.dwd.0                    : dwd                   : Iobroker                                 -  enabled
+ system.adapter.echarts.0                : echarts               : Iobroker                                 -  enabled
  system.adapter.email.0                  : email                 : Iobroker                                 - disabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : Iobroker                                 - disabled
  system.adapter.flot.0                   : flot                  : Iobroker                                 - disabled
  system.adapter.fritzdect.1              : fritzdect             : Iobroker                                 - disabled
  system.adapter.history.0                : history               : Iobroker                                 - disabled
  system.adapter.hm-rega.0                : hm-rega               : Iobroker                                 - disabled
  system.adapter.hm-rega.1                : hm-rega               : Iobroker                                 - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : Iobroker                                 - disabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : Iobroker                                 - disabled, port: 0
  system.adapter.hm-rpc.2                 : hm-rpc                : Iobroker                                 - disabled, port: 0
  system.adapter.homeconnect.0            : homeconnect           : Iobroker                                 - disabled
  system.adapter.hue.0                    : hue                   : Iobroker                                 - disabled, port: 443
  system.adapter.info.0                   : info                  : Iobroker                                 - disabled
  system.adapter.javascript.0             : javascript            : Iobroker                                 - disabled
+ system.adapter.modbus.0                 : modbus                : Iobroker                                 -  enabled
  system.adapter.modbus.1                 : modbus                : Iobroker                                 - disabled
  system.adapter.mqtt.0                   : mqtt                  : Iobroker                                 - disabled, port: 1883, bind: 192.168.178.65
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : Iobroker                                 - disabled
  system.adapter.nut.0                    : nut                   : Iobroker                                 - disabled
  system.adapter.ping.0                   : ping                  : Iobroker                                 - disabled
  system.adapter.shelly.0                 : shelly                : Iobroker                                 - disabled, port: 1882, bind: 0.0.0.0
  system.adapter.sonos.0                  : sonos                 : Iobroker                                 - disabled
  system.adapter.statistics.0             : statistics            : Iobroker                                 - disabled
  system.adapter.stiebel-isg.0            : stiebel-isg           : Iobroker                                 - disabled
  system.adapter.synology.0               : synology              : Iobroker                                 - disabled, port: 5000
  system.adapter.tr-064.0                 : tr-064                : Iobroker                                 - disabled
  system.adapter.vis-2.0                  : vis-2                 : Iobroker                                 - disabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : Iobroker                                 - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : Iobroker                                 - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : Iobroker                                 - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : Iobroker                                 - disabled
  system.adapter.vis.0                    : vis                   : Iobroker                                 -  enabled
  system.adapter.vr200.0                  : vr200                 : Iobroker                                 - disabled
  system.adapter.weather-warnings.0       : weather-warnings      : Iobroker                                 - disabled
+ system.adapter.web.0                    : web                   : Iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : Iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.17.14  , installed 6.13.16 [Updatable]
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "echarts"      : 1.7.2    , installed 1.7.2
Adapter    "email"        : 1.3.1    , installed 1.3.1
Adapter    "fb-checkpresence": 1.2.4 , installed 1.2.4
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.5.9    , installed 2.5.9
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.17.0   , installed 1.16.0 [Updatable]
Adapter    "homeconnect"  : 1.4.0    , installed 1.4.0
Adapter    "hue"          : 3.11.0   , installed 3.11.0
Adapter    "javascript"   : 8.3.1    , installed 7.1.6  [Updatable]
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "modbus"       : 6.2.3    , installed 6.2.3
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "shelly"       : 7.0.0    , installed 7.0.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.0    , installed 6.7.0
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "stiebel-isg"  : 1.7.7    , installed 1.7.7
Adapter    "synology"     : 3.1.0    , installed 3.1.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.32   , installed 2.9.32
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vr200"        : 1.0.0    , installed 1.1.0
Adapter    "weather-warnings": 0.6.7 , installed 0.6.7
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.1    , installed 2.6.1

Objects and States
Please stand by - This may take a while
Objects:        5810
States:         4883

*** OS-Repositories and Updates ***
Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease
Hit:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          121511600  287/master          
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       121511504  112/iobroker.js-con 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       121511747  112/iobroker.js-con 
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          121509869  1/init              
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      106        121511341  109/systemd-resolve 
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          121511601  287/master          
tcp6       0      0 :::111                  :::*                    LISTEN      0          121509871  1/init              
tcp6       0      0 :::22                   :::*                    LISTEN      0          121510252  1/init              
tcp6       0      0 :::21                   :::*                    LISTEN      0          121510369  119/vsftpd          
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       121510908  452/io.web.0        
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       121511886  314/io.admin.0      
udp        0      0 127.0.0.53:53           0.0.0.0:*                           106        121511340  109/systemd-resolve 
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          121509870  1/init              
udp6       0      0 :::111                  :::*                                0          121509872  1/init              

*** Log File - Last 25 Lines ***

2024-07-17 09:14:56.295  - info: host.Iobroker instance system.adapter.echarts.0 started with pid 407
2024-07-17 09:14:57.057  - info: echarts.0 (407) starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.echarts, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:15:00.016  - info: host.Iobroker instance system.adapter.dwd.0 started with pid 422
2024-07-17 09:15:01.062  - info: dwd.0 (422) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:15:01.117  - info: vis.0 (429) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.vis, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:15:01.881  - info: vis.0 (429) Terminated (NO_ERROR): Without reason
2024-07-17 09:15:02.393  - info: dwd.0 (422) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-17 09:15:02.418  - info: host.Iobroker instance system.adapter.vis.0 terminated while should be started once
2024-07-17 09:15:02.913  - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-17 09:15:04.369  - info: host.Iobroker instance system.adapter.web.0 started with pid 452
2024-07-17 09:15:05.317  - info: web.0 (452) starting. Version 6.2.5 in /opt/iobroker/node_modules/iobroker.web, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:15:05.459  - info: web.0 (452) socket.io server listening on port 8082
2024-07-17 09:15:05.462  - info: web.0 (452) http server listening on port 8082
2024-07-17 09:20:00.013  - info: host.Iobroker instance system.adapter.dwd.0 started with pid 482
2024-07-17 09:20:00.862  - info: dwd.0 (482) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:20:02.293  - info: dwd.0 (482) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-17 09:20:02.815  - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-17 09:25:00.013  - info: host.Iobroker instance system.adapter.dwd.0 started with pid 497
2024-07-17 09:25:00.853  - info: dwd.0 (497) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:25:01.955  - info: dwd.0 (497) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-17 09:25:02.479  - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-17 09:30:00.013  - info: host.Iobroker instance system.adapter.dwd.0 started with pid 585
2024-07-17 09:30:00.868  - info: dwd.0 (585) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:30:02.374  - info: dwd.0 (585) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-17 09:30:02.894  - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

============ Mark until here for C&P =============

iob diag has finished.

Skript v.2024-05-22

*** BASE SYSTEM ***
 Static hostname: Iobroker
       Icon name: computer-container
         Chassis: container
  Virtualization: lxc
Operating System: Ubuntu 22.04.4 LTS
          Kernel: Linux 6.5.11-8-pve
    Architecture: x86-64

model name      : Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz
Docker          : false
Virtualization  : lxc
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 09:30:15 up 15 min,  3 users,  load average: 0.12, 0.09, 0.24
CPU threads: 2


*** Time and Time Zones ***
               Local time: Wed 2024-07-17 09:30:15 UTC
           Universal time: Wed 2024-07-17 09:30:15 UTC
                 RTC time: n/a
                Time zone: Etc/UTC (UTC, +0000)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
root
HOME=/root
GROUPS=root

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video plugdev

*** Display-Server-Setup ***
Display-Server: false
Desktop: 
Terminal: 
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.1G        536M        3.3G        0.0K        223M        3.6G
Swap:           4.1G          0B        4.1G
Total:          8.2G        536M        7.4G

Active iob-Instances:   6

         4096 M total memory
          536 M used memory
          609 M active memory
          107 M inactive memory
         3336 M free memory
            0 M buffer memory
          223 M swap cache
         4096 M total swap
            0 M used swap
         4096 M free swap

*** top - Table Of Processes  ***
top - 09:30:15 up 15 min,  3 users,  load average: 0.12, 0.09, 0.24
Tasks:  35 total,   1 running,  34 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us,  3.2 sy,  0.0 ni, 96.8 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   4096.0 total,   3335.9 free,    536.5 used,    223.7 buff/cache
MiB Swap:   4096.0 total,   4096.0 free,      0.0 used.   3559.5 avail Mem 

*** FAILED SERVICES ***

  UNIT                 LOAD   ACTIVE SUB    DESCRIPTION
* run-rpc_pipefs.mount loaded failed failed RPC Pipe File System

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem                       Type      Size  Used Avail Use% Mounted on
/dev/mapper/pve-vm--245--disk--0 ext4       30G  4.3G   24G  16% /
none                             tmpfs     492K  4.0K  488K   1% /dev
efivarfs                         efivarfs  128K  125K     0 100% /sys/firmware/efi/efivars
tmpfs                            tmpfs     7.8G     0  7.8G   0% /dev/shm
tmpfs                            tmpfs     3.1G  112K  3.1G   1% /run
tmpfs                            tmpfs     5.0M     0  5.0M   0% /run/lock

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems:
TARGET                                        SOURCE                           FSTYPE      OPTIONS
/                                             /dev/mapper/pve-vm--245--disk--0 ext4        rw,relatime,stripe=16
|-/run                                        tmpfs                            tmpfs       rw,nosuid,nodev,size=3249876k,nr_inodes=819200,mode=755,uid=100000,gid=100000,inode64
| |-/run/lock                                 tmpfs                            tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k,uid=100000,gid=100000,inode64
| `-/run/credentials/systemd-sysusers.service ramfs                            ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
|-/dev                                        none                             tmpfs       rw,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64
| |-/dev/shm                                  tmpfs                            tmpfs       rw,nosuid,nodev,uid=100000,gid=100000,inode64
| |-/dev/mqueue                               mqueue                           mqueue      rw,relatime
| |-/dev/.lxc/proc                            proc                             proc        rw,relatime
| |-/dev/.lxc/sys                             sys                              sysfs       rw,relatime
| |-/dev/full                                 udev[/full]                      devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/null                                 udev[/null]                      devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/random                               udev[/random]                    devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/tty                                  udev[/tty]                       devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/urandom                              udev[/urandom]                   devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/zero                                 udev[/zero]                      devtmpfs    rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64
| |-/dev/pts                                  devpts                           devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
| |-/dev/ptmx                                 devpts[/ptmx]                    devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
| |-/dev/console                              devpts[/0]                       devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
| |-/dev/tty1                                 devpts[/1]                       devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
| `-/dev/tty2                                 devpts[/2]                       devpts      rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026
|-/proc                                       proc                             proc        rw,nosuid,nodev,noexec,relatime
| |-/proc/sys                                 proc[/sys]                       proc        ro,relatime
| | |-/proc/sys/net                           proc[/sys/net]                   proc        rw,nosuid,nodev,noexec,relatime
| | |-/proc/sys/fs/binfmt_misc                binfmt_misc                      binfmt_misc rw,nosuid,nodev,noexec,relatime
| | `-/proc/sys/kernel/random/boot_id         none[/.lxc-boot-id]              tmpfs       ro,nosuid,nodev,noexec,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64
| |-/proc/sysrq-trigger                       proc[/sysrq-trigger]             proc        ro,relatime
| |-/proc/cpuinfo                             lxcfs[/proc/cpuinfo]             fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/diskstats                           lxcfs[/proc/diskstats]           fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/loadavg                             lxcfs[/proc/loadavg]             fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/meminfo                             lxcfs[/proc/meminfo]             fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/slabinfo                            lxcfs[/proc/slabinfo]            fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/stat                                lxcfs[/proc/stat]                fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| |-/proc/swaps                               lxcfs[/proc/swaps]               fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
| `-/proc/uptime                              lxcfs[/proc/uptime]              fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other
`-/sys                                        sysfs                            sysfs       ro,nosuid,nodev,noexec,relatime
  |-/sys/fs/fuse/connections                  fusectl                          fusectl     rw,nosuid,nodev,noexec,relatime
  |-/sys/devices/virtual/net                  sysfs[/devices/virtual/net]      sysfs       rw,nosuid,nodev,noexec,relatime
  |-/sys/kernel/debug                         debugfs                          debugfs     rw,nosuid,nodev,noexec,relatime
  |-/sys/kernel/security                      securityfs                       securityfs  rw,nosuid,nodev,noexec,relatime
  |-/sys/fs/pstore                            pstore                           pstore      rw,nosuid,nodev,noexec,relatime
  |-/sys/firmware/efi/efivars                 efivarfs                         efivarfs    rw,nosuid,nodev,noexec,relatime
  |-/sys/fs/cgroup                            none                             cgroup2     rw,nosuid,nodev,noexec,relatime
  `-/sys/devices/system/cpu                   lxcfs[/sys/devices/system/cpu]   fuse.lxcfs  rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other

Files in neuralgic directories:

/var:
699M    /var/
365M    /var/cache
359M    /var/cache/apt
284M    /var/lib
260M    /var/cache/apt/archives

Archived and active journals take up 48.0M in the file system.

/opt/iobroker/backups:
397M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
593M    /opt/iobroker/iobroker-data/
468M    /opt/iobroker/iobroker-data/files
142M    /opt/iobroker/iobroker-data/files/vis-2
89M     /opt/iobroker/iobroker-data/files/echarts.admin
87M     /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
34M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map
24M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map
24M     /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

No Devices found 'by-id'




*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.4
/usr/bin/node           v18.20.4
/usr/bin/npm            10.7.0
/usr/bin/npx            10.7.0
/usr/bin/corepack       0.28.0


nodejs:
  Installed: 18.20.4-1nodesource1
  Candidate: 18.20.4-1nodesource1
  Version table:
 *** 18.20.4-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     18.20.3-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     12.22.9~dfsg-1ubuntu3.6 500
        500 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages
        500 http://archive.ubuntu.com/ubuntu jammy-security/universe amd64 Packages
     12.22.9~dfsg-1ubuntu3 500
        500 http://archive.ubuntu.com/ubuntu jammy/universe amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.19
admin:          6.13.16
javascript:     7.1.6

nodejs modules from github:     2
| +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0)
+-- iobroker.vr200@1.1.0 (git+ssh://git@github.com/Eisbaeeer/ioBroker.vr200.git#e55ff645b6a6d6b12e23535b15b81a0de68ee676)

Adapter State
+ system.adapter.admin.0                  : admin                 : Iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : Iobroker                                 -  enabled
  system.adapter.discovery.0              : discovery             : Iobroker                                 - disabled
  system.adapter.dwd.0                    : dwd                   : Iobroker                                 -  enabled
+ system.adapter.echarts.0                : echarts               : Iobroker                                 -  enabled
  system.adapter.email.0                  : email                 : Iobroker                                 - disabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : Iobroker                                 - disabled
  system.adapter.flot.0                   : flot                  : Iobroker                                 - disabled
  system.adapter.fritzdect.1              : fritzdect             : Iobroker                                 - disabled
  system.adapter.history.0                : history               : Iobroker                                 - disabled
  system.adapter.hm-rega.0                : hm-rega               : Iobroker                                 - disabled
  system.adapter.hm-rega.1                : hm-rega               : Iobroker                                 - disabled
  system.adapter.hm-rpc.0                 : hm-rpc                : Iobroker                                 - disabled, port: 0
  system.adapter.hm-rpc.1                 : hm-rpc                : Iobroker                                 - disabled, port: 0
  system.adapter.hm-rpc.2                 : hm-rpc                : Iobroker                                 - disabled, port: 0
  system.adapter.homeconnect.0            : homeconnect           : Iobroker                                 - disabled
  system.adapter.hue.0                    : hue                   : Iobroker                                 - disabled, port: 443
  system.adapter.info.0                   : info                  : Iobroker                                 - disabled
  system.adapter.javascript.0             : javascript            : Iobroker                                 - disabled
+ system.adapter.modbus.0                 : modbus                : Iobroker                                 -  enabled
  system.adapter.modbus.1                 : modbus                : Iobroker                                 - disabled
  system.adapter.mqtt.0                   : mqtt                  : Iobroker                                 - disabled, port: 1883, bind: 192.168.178.65
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : Iobroker                                 - disabled
  system.adapter.nut.0                    : nut                   : Iobroker                                 - disabled
  system.adapter.ping.0                   : ping                  : Iobroker                                 - disabled
  system.adapter.shelly.0                 : shelly                : Iobroker                                 - disabled, port: 1882, bind: 0.0.0.0
  system.adapter.sonos.0                  : sonos                 : Iobroker                                 - disabled
  system.adapter.statistics.0             : statistics            : Iobroker                                 - disabled
  system.adapter.stiebel-isg.0            : stiebel-isg           : Iobroker                                 - disabled
  system.adapter.synology.0               : synology              : Iobroker                                 - disabled, port: 5000
  system.adapter.tr-064.0                 : tr-064                : Iobroker                                 - disabled
  system.adapter.vis-2.0                  : vis-2                 : Iobroker                                 - disabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : Iobroker                                 - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : Iobroker                                 - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : Iobroker                                 - disabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : Iobroker                                 - disabled
  system.adapter.vis.0                    : vis                   : Iobroker                                 -  enabled
  system.adapter.vr200.0                  : vr200                 : Iobroker                                 - disabled
  system.adapter.weather-warnings.0       : weather-warnings      : Iobroker                                 - disabled
+ system.adapter.web.0                    : web                   : Iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : Iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : Iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.17.14  , installed 6.13.16 [Updatable]
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "echarts"      : 1.7.2    , installed 1.7.2
Adapter    "email"        : 1.3.1    , installed 1.3.1
Adapter    "fb-checkpresence": 1.2.4 , installed 1.2.4
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.5.9    , installed 2.5.9
Adapter    "history"      : 3.0.1    , installed 3.0.1
Adapter    "hm-rega"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rpc"       : 1.17.0   , installed 1.16.0 [Updatable]
Adapter    "homeconnect"  : 1.4.0    , installed 1.4.0
Adapter    "hue"          : 3.11.0   , installed 3.11.0
Adapter    "javascript"   : 8.3.1    , installed 7.1.6  [Updatable]
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "modbus"       : 6.2.3    , installed 6.2.3
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "shelly"       : 7.0.0    , installed 7.0.0
Adapter    "simple-api"   : 2.8.0    , installed 2.8.0
Adapter    "socketio"     : 6.7.0    , installed 6.7.0
Adapter    "sonos"        : 3.0.0    , installed 3.0.0
Adapter    "statistics"   : 2.4.0    , installed 2.4.0
Adapter    "stiebel-isg"  : 1.7.7    , installed 1.7.7
Adapter    "synology"     : 3.1.0    , installed 3.1.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.32   , installed 2.9.32
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vr200"        : 1.0.0    , installed 1.1.0
Adapter    "weather-warnings": 0.6.7 , installed 0.6.7
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.1    , installed 2.6.1

Objects and States
Please stand by - This may take a while
Objects:        5810
States:         4883

*** OS-Repositories and Updates ***
Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease
Hit:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease
Hit:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:25            0.0.0.0:*               LISTEN      0          121511600  287/master          
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       121511504  112/iobroker.js-con 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       121511747  112/iobroker.js-con 
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          121509869  1/init              
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      106        121511341  109/systemd-resolve 
tcp6       0      0 ::1:25                  :::*                    LISTEN      0          121511601  287/master          
tcp6       0      0 :::111                  :::*                    LISTEN      0          121509871  1/init              
tcp6       0      0 :::22                   :::*                    LISTEN      0          121510252  1/init              
tcp6       0      0 :::21                   :::*                    LISTEN      0          121510369  119/vsftpd          
tcp6       0      0 :::8082                 :::*                    LISTEN      1000       121510908  452/io.web.0        
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       121511886  314/io.admin.0      
udp        0      0 127.0.0.53:53           0.0.0.0:*                           106        121511340  109/systemd-resolve 
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          121509870  1/init              
udp6       0      0 :::111                  :::*                                0          121509872  1/init              

*** Log File - Last 25 Lines ***

2024-07-17 09:14:56.295  - info: host.Iobroker instance system.adapter.echarts.0 started with pid 407
2024-07-17 09:14:57.057  - info: echarts.0 (407) starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.echarts, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:15:00.016  - info: host.Iobroker instance system.adapter.dwd.0 started with pid 422
2024-07-17 09:15:01.062  - info: dwd.0 (422) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:15:01.117  - info: vis.0 (429) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.vis, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:15:01.881  - info: vis.0 (429) Terminated (NO_ERROR): Without reason
2024-07-17 09:15:02.393  - info: dwd.0 (422) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-17 09:15:02.418  - info: host.Iobroker instance system.adapter.vis.0 terminated while should be started once
2024-07-17 09:15:02.913  - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-17 09:15:04.369  - info: host.Iobroker instance system.adapter.web.0 started with pid 452
2024-07-17 09:15:05.317  - info: web.0 (452) starting. Version 6.2.5 in /opt/iobroker/node_modules/iobroker.web, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:15:05.459  - info: web.0 (452) socket.io server listening on port 8082
2024-07-17 09:15:05.462  - info: web.0 (452) http server listening on port 8082
2024-07-17 09:20:00.013  - info: host.Iobroker instance system.adapter.dwd.0 started with pid 482
2024-07-17 09:20:00.862  - info: dwd.0 (482) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:20:02.293  - info: dwd.0 (482) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-17 09:20:02.815  - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-17 09:25:00.013  - info: host.Iobroker instance system.adapter.dwd.0 started with pid 497
2024-07-17 09:25:00.853  - info: dwd.0 (497) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:25:01.955  - info: dwd.0 (497) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-17 09:25:02.479  - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-07-17 09:30:00.013  - info: host.Iobroker instance system.adapter.dwd.0 started with pid 585
2024-07-17 09:30:00.868  - info: dwd.0 (585) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19
2024-07-17 09:30:02.374  - info: dwd.0 (585) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-07-17 09:30:02.894  - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

============ Mark until here for C&P =============

iob diag has finished.

MOD-EDIT: Code in code-tags gesetzt!

Homoran

@cappy_451 sagte in IOBroker Restore History Daten Problem:

nun scheitere ich beim wiederherstellend er historischen Daten.

wie willst du das durchführen?

Wenn du
@cappy_451 sagte in IOBroker Restore History Daten Problem:

Die Konfiguration habe ich mit dem backup Adapter wiederhergestellt,

sollte auch die History mit hergestellt werden, wenn du diese ebenfalls mit Backitup gesichert hattest.

Thomas Braun

@cappy_451 sagte in IOBroker Restore History Daten Problem:

           Local time: Wed 2024-07-17 09:30:15 UTC
       Universal time: Wed 2024-07-17 09:30:15 UTC

Setz die Zeitzone schon mal richtig.

root
HOME=/root
GROUPS=root

Hampel nicht als root durch den Container. User anlegen.

Boot Target: graphical.target

boot target multi-user setzen.

cappy_451

@homoran
der History Adapter wird ja auch wiederhergestellt, nur beim wiederherstellen der geloggten Daten kommt es immer wider zum Abbruch des Restore.

backitup.0 2024-07-16 09:57:29.691 error [historyDB] Error: EACCES: permission denied, stat '/opt/iobroker/iobroker-data/history/20221102'

Homoran

@cappy_451 sagte in IOBroker Restore History Daten Problem:

20221102

ist das der älteste Eintrag?

befinden sich trotzdem schon Daten unter /opt/iobroker/iobroker-data/history?

cappy_451

Hallo,
ich bin jetzt noch einmal her gegangen und habe das ganze System unter Proxmox komplett neu aufgesetzt, anschließend
die Konfiguration zurückgespielt und den History Adapter gestartet

Die Daten werden ganz normal in History Ordner in dem entsprechenden Unterordner für den Tag abgelegt.

So sehen die Rechte für den Ordner aus.

drwxrwxr-x+ 3 iobroker iobroker 4096 Jul 17 10:59 history

Dann bin ich her gegangen und habe ein Backup der aktuellen History Daten gemacht und anschließen wieder zurück gespielt.
Hat alles funktionier ohne Fehler.

So sehen die Rechte für den Ordner aus.

drwxr-xr-x+ 3 iobroker iobroker 4096 Jul 17 10:59 history

Jetzt kommt es, ich habe nun das Backup der historischen daten genommen welches ich von dem Iobroker welches unter Windows läuft
gemacht habe und dies zurück gespielt. Dies bricht natürlich wie die ganze Zeit mit Fehler ab und nun sehen die Rechte vom History Ordner so aus.

drw-r--r--+ 3 iobroker iobroker 4096 Jul 16 22:00 history

Hat jemand eine Erklärung dafür, was dort passiert?? Warum werden die Rechte bei diesem Backup verändert?????????

Thomas Braun

@cappy_451 sagte in IOBroker Restore History Daten Problem:

Hat jemand eine Erklärung dafür, was dort passiert?? Warum werden die Rechte bei diesem Backup verändert?????????

Ich hab oben schon mal gefragt, wo und wie die Backupdatei herkommt.

Wo/wie kommt die Windows auf das System? Gemountete Freigabe? Von Hand irgendwie herüber kopiert?

Je nach Konstellation schleppst du da die falschen Rechte ein.

Und die Rechte bei ACLs kannst du nicht per Bits auslesen, das geht nur per

getfacl /pfad/zur/datei

Homoran

@cappy_451 sagte in IOBroker Restore History Daten Problem:

komplett neu aufgesetzt

wie???
wieder als root?

cappy_451

@thomas-braun
Ich sichere die Dateien per FTP auf ein NAS und greife dann per FTP für das Restore auf die Datei zu.

Sind den in dem Backup Rechte mit drin? Ich dachte bis her, dass die Daten einfach nur gepackt würden.

Das könnte da Ganze natürlich erklären mit den Rechten, würde aber auch heißen, dass man diese daten dann so nicht zurückspielen kann, oder gibt es da eine Möglichkeit das Rechte Problem zu umgehen?

cappy_451

@homoran
Ich habe diese Anleitung genommen:
https://www.iobroker.net/docu/index-20.htm?page_id=5358&lang=de und dan diese
https://www.iobroker.net/#de/documentation/install/linux.md

Dort wird immer als root installiert oder nicht?

Gibt es eine Anleitung wo man das nicht als root macht?

Homoran

@cappy_451 sagte in IOBroker Restore History Daten Problem:

Dort wird immer als root installiert oder nicht?

die erste Doku stammt aus 2014-18 und ist vollkommen veraltet. Damals gab es noch keine Rechteverwaltung, die prüfe ich jetzt nicht

in der zweiten (aktuellen) Doku steht gaaaanz oben

KEINE Installation von ioBroker als root User!

cappy_451

@homoran
Ups, den Teil hab ich mal ausgelassen beim lesen, bin gleich zum curl Aufruf gesprungen.

Installiere gleich noch mal eine neun Maschine geht ja fix.
Danke.

Thomas Braun

@cappy_451

Ergänzend noch:

https://www.iobroker.net/#de/documentation/install/proxmox.md

Auch da steht drin, wie man einen user anlegt.

cappy_451

@thomas-braun

Danke für die Anleitung.
Ich habe danach noch einmal neu installiert, nun auch nicht mit den root als user, jedoch bleibt das Problem bestehen, wenn ich die Historischen Daten aus dem Backup einspiele werden wohl die Rechte des History Ordners durcheinander gebracht und der Restore bricht ab.

Gibt es eine andere Lösung, wie ich meine alten Daten dort hinein bekomme?

Homoran

@cappy_451 wie waren denn die Rechte in der alten Installation?

und bitte noch beantworten:

@homoran sagte in IOBroker Restore History Daten Problem:

@cappy_451 sagte in IOBroker Restore History Daten Problem:

20221102

ist das der älteste Eintrag?

befinden sich trotzdem schon Daten unter /opt/iobroker/iobroker-data/history?

Community Forum

NEWS

IOBroker Restore History Daten Problem

Support us

533

32.4k

81.4k

1.3m