IOBroker Restore History Daten Problem
-
gib in der Console mal ein "iob fix" ein, damit werden die Schreibrechte in /opt/iobroker/ wieder gerade gerueckt...
Undniemals niemals als root in der Console rum machen..
-
@ilovegym sagte in IOBroker Restore History Daten Problem:
iob fix
Hallo,
habe ich ausgeführt und wurde auch erfolgreich abgeschlossen, nur keider immer noch das gleiche Problem.WEnn ich das Backup (history Daten) vom "Linux IObroker" funktioniert es ohne Problem, die daten vom "Windows" IOBroker will er nicht,
Gruß
Cappy -
@cappy_451 zeig mal:
ls -l /opt/iobroker/iobroker-data/historyund
ls -l /opt/iobroker/iobroker-data/history/20221102 -
@fastfoot
root@Iobroker:/opt/iobroker/iobroker-data# ls -l /opt/iobroker/iobroker-data/history
total 0root@Iobroker:/opt/iobroker/iobroker-data# ls -l /opt/iobroker/iobroker-data/history/20221102
ls: cannot access '/opt/iobroker/iobroker-data/history/20221102': No such file or directoryIch denke das Verzeichnis 20221102 soll wiederhergestellt werden, nur funktioniert das nicht, es kann nicht angelegt werden.
Das ist immer die Meldung welche erscheint: Error:
{"errno":-13,"code":"EACCES","syscall":"stat","path":"/opt/iobroker/iobroker-data/history/20221102"}
-
@cappy_451 iob fix ändert nicht die Berechtigungen für Ordner, mach mal
chmod 775 /opt/iobroker/iobroker-data/history -
was machst du da.. NIEMALS als root einloggen, das verbiegt dir alle Rechte ..
Leg einen user an, gib ihm root rechte, und dann stimmt das, man arbeitet dann mit sudo und gut ist.. -
Hallo,
ich habe nun einen user mit root rechten angelegt und mich mit dem eingelogt.
nach
sudo chmod 775 /opt/iobroker/iobroker-data/history sieht das mit den Rechten so aus
drwxrwxr-x+ 3 iobroker iobroker 4096 Jul 15 22:00 history
Dann versucht das Backup (Historische Daten) zurückzuspielen, dann sieht es so aus.
drw-r--r--+ 3 iobroker iobroker 4096 Jul 15 22:00 history
Da sind die Schreibrechte nicht mehr da. Restore hat auch wieder mit Fehler abgebrochen.
-
@cappy_451 sagte in IOBroker Restore History Daten Problem:
Da sind die Schreibrechte nicht mehr da.
Da liegen ACLs drauf. Die Rechte kannst du da nicht mit ls -l ablesen.
getfacl /opt/iobroker/iobroker-data/historyWo/wie kommt die Windows auf das System? Gemountete Freigabe? Von Hand irgendwie herüber kopiert?
-
@cappy_451 sagte in IOBroker Restore History Daten Problem:
ich habe nun einen user mit root rechten angelegt und mich mit dem eingelogt.
Und in welchen Gruppen ist der nun drin?
Gib mal die Langfassung von
iob diagbekannt, damit man mal einen Überblick über dein System bekommt.
-
Nur noch mal zur Info, ich benutze seit zwei Jahren IOBroker auf einem Windows Rechner und möchte dies nun umziehen auf ein Linux System welches unter Proxmox läuft.
Von meinem Windows Iobroker habe ich mit dem Backup Adapter ein Backup gemacht, Konfiguration und auch Historische Daten.
Der "Linux" Iobroker ist installiert und läuft auch, Die Konfiguration habe ich mit dem backup Adapter wiederhergestellt, nun scheitere ich beim wiederherstellend er historischen Daten.
Hier die Diagnose Daten vom System
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: Iobroker Icon name: computer-container Chassis: container Virtualization: lxc Operating System: Ubuntu 22.04.4 LTS Kernel: Linux 6.5.11-8-pve Architecture: x86-64 model name : Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 09:30:15 up 15 min, 3 users, load average: 0.12, 0.09, 0.24 CPU threads: 2 *** Time and Time Zones *** Local time: Wed 2024-07-17 09:30:15 UTC Universal time: Wed 2024-07-17 09:30:15 UTC RTC time: n/a Time zone: Etc/UTC (UTC, +0000) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': root HOME=/root GROUPS=root User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.1G 536M 3.3G 0.0K 223M 3.6G Swap: 4.1G 0B 4.1G Total: 8.2G 536M 7.4G Active iob-Instances: 6 4096 M total memory 536 M used memory 609 M active memory 107 M inactive memory 3336 M free memory 0 M buffer memory 223 M swap cache 4096 M total swap 0 M used swap 4096 M free swap *** top - Table Of Processes *** top - 09:30:15 up 15 min, 3 users, load average: 0.12, 0.09, 0.24 Tasks: 35 total, 1 running, 34 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 3.2 sy, 0.0 ni, 96.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 4096.0 total, 3335.9 free, 536.5 used, 223.7 buff/cache MiB Swap: 4096.0 total, 4096.0 free, 0.0 used. 3559.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--245--disk--0 ext4 30G 4.3G 24G 16% / none tmpfs 492K 4.0K 488K 1% /dev efivarfs efivarfs 128K 125K 0 100% /sys/firmware/efi/efivars tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.1G 112K 3.1G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--245--disk--0 ext4 rw,relatime,stripe=16 |-/run tmpfs tmpfs rw,nosuid,nodev,size=3249876k,nr_inodes=819200,mode=755,uid=100000,gid=100000,inode64 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k,uid=100000,gid=100000,inode64 | `-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 |-/dev none tmpfs rw,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev,uid=100000,gid=100000,inode64 | |-/dev/mqueue mqueue mqueue rw,relatime | |-/dev/.lxc/proc proc proc rw,relatime | |-/dev/.lxc/sys sys sysfs rw,relatime | |-/dev/full udev[/full] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/null udev[/null] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/random udev[/random] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/tty udev[/tty] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/urandom udev[/urandom] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/zero udev[/zero] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/ptmx devpts[/ptmx] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/console devpts[/0] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/tty1 devpts[/1] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | `-/dev/tty2 devpts[/2] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 |-/proc proc proc rw,nosuid,nodev,noexec,relatime | |-/proc/sys proc[/sys] proc ro,relatime | | |-/proc/sys/net proc[/sys/net] proc rw,nosuid,nodev,noexec,relatime | | |-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime | | `-/proc/sys/kernel/random/boot_id none[/.lxc-boot-id] tmpfs ro,nosuid,nodev,noexec,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | |-/proc/sysrq-trigger proc[/sysrq-trigger] proc ro,relatime | |-/proc/cpuinfo lxcfs[/proc/cpuinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/diskstats lxcfs[/proc/diskstats] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/loadavg lxcfs[/proc/loadavg] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/meminfo lxcfs[/proc/meminfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/slabinfo lxcfs[/proc/slabinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/stat lxcfs[/proc/stat] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/swaps lxcfs[/proc/swaps] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | `-/proc/uptime lxcfs[/proc/uptime] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other `-/sys sysfs sysfs ro,nosuid,nodev,noexec,relatime |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/sys/devices/virtual/net sysfs[/devices/virtual/net] sysfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime |-/sys/firmware/efi/efivars efivarfs efivarfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/cgroup none cgroup2 rw,nosuid,nodev,noexec,relatime `-/sys/devices/system/cpu lxcfs[/sys/devices/system/cpu] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other Files in neuralgic directories: /var: 699M /var/ 365M /var/cache 359M /var/cache/apt 284M /var/lib 260M /var/cache/apt/archives Archived and active journals take up 48.0M in the file system. /opt/iobroker/backups: 397M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 593M /opt/iobroker/iobroker-data/ 468M /opt/iobroker/iobroker-data/files 142M /opt/iobroker/iobroker-data/files/vis-2 89M /opt/iobroker/iobroker-data/files/echarts.admin 87M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 34M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.4 /usr/bin/node v18.20.4 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.4-1nodesource1 Candidate: 18.20.4-1nodesource1 Version table: *** 18.20.4-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 12.22.9~dfsg-1ubuntu3.6 500 500 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages 500 http://archive.ubuntu.com/ubuntu jammy-security/universe amd64 Packages 12.22.9~dfsg-1ubuntu3 500 500 http://archive.ubuntu.com/ubuntu jammy/universe amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.1.6 nodejs modules from github: 2 | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) +-- iobroker.vr200@1.1.0 (git+ssh://git@github.com/Eisbaeeer/ioBroker.vr200.git#e55ff645b6a6d6b12e23535b15b81a0de68ee676) Adapter State + system.adapter.admin.0 : admin : Iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : Iobroker - enabled system.adapter.discovery.0 : discovery : Iobroker - disabled system.adapter.dwd.0 : dwd : Iobroker - enabled + system.adapter.echarts.0 : echarts : Iobroker - enabled system.adapter.email.0 : email : Iobroker - disabled system.adapter.fb-checkpresence.0 : fb-checkpresence : Iobroker - disabled system.adapter.flot.0 : flot : Iobroker - disabled system.adapter.fritzdect.1 : fritzdect : Iobroker - disabled system.adapter.history.0 : history : Iobroker - disabled system.adapter.hm-rega.0 : hm-rega : Iobroker - disabled system.adapter.hm-rega.1 : hm-rega : Iobroker - disabled system.adapter.hm-rpc.0 : hm-rpc : Iobroker - disabled, port: 0 system.adapter.hm-rpc.1 : hm-rpc : Iobroker - disabled, port: 0 system.adapter.hm-rpc.2 : hm-rpc : Iobroker - disabled, port: 0 system.adapter.homeconnect.0 : homeconnect : Iobroker - disabled system.adapter.hue.0 : hue : Iobroker - disabled, port: 443 system.adapter.info.0 : info : Iobroker - disabled system.adapter.javascript.0 : javascript : Iobroker - disabled + system.adapter.modbus.0 : modbus : Iobroker - enabled system.adapter.modbus.1 : modbus : Iobroker - disabled system.adapter.mqtt.0 : mqtt : Iobroker - disabled, port: 1883, bind: 192.168.178.65 system.adapter.netatmo-crawler.0 : netatmo-crawler : Iobroker - disabled system.adapter.nut.0 : nut : Iobroker - disabled system.adapter.ping.0 : ping : Iobroker - disabled system.adapter.shelly.0 : shelly : Iobroker - disabled, port: 1882, bind: 0.0.0.0 system.adapter.sonos.0 : sonos : Iobroker - disabled system.adapter.statistics.0 : statistics : Iobroker - disabled system.adapter.stiebel-isg.0 : stiebel-isg : Iobroker - disabled system.adapter.synology.0 : synology : Iobroker - disabled, port: 5000 system.adapter.tr-064.0 : tr-064 : Iobroker - disabled system.adapter.vis-2.0 : vis-2 : Iobroker - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Iobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Iobroker - disabled system.adapter.vis-justgage.0 : vis-justgage : Iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Iobroker - disabled system.adapter.vis.0 : vis : Iobroker - enabled system.adapter.vr200.0 : vr200 : Iobroker - disabled system.adapter.weather-warnings.0 : weather-warnings : Iobroker - disabled + system.adapter.web.0 : web : Iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : Iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.17.14 , installed 6.13.16 [Updatable] Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.0 , installed 1.4.0 Adapter "hue" : 3.11.0 , installed 3.11.0 Adapter "javascript" : 8.3.1 , installed 7.1.6 [Updatable] Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "modbus" : 6.2.3 , installed 6.2.3 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "stiebel-isg" : 1.7.7 , installed 1.7.7 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vr200" : 1.0.0 , installed 1.1.0 Adapter "weather-warnings": 0.6.7 , installed 0.6.7 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Objects and States Please stand by - This may take a while Objects: 5810 States: 4883 *** OS-Repositories and Updates *** Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease Hit:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease Hit:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 121511600 287/master tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 121511504 112/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 121511747 112/iobroker.js-con tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 121509869 1/init tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 106 121511341 109/systemd-resolve tcp6 0 0 ::1:25 :::* LISTEN 0 121511601 287/master tcp6 0 0 :::111 :::* LISTEN 0 121509871 1/init tcp6 0 0 :::22 :::* LISTEN 0 121510252 1/init tcp6 0 0 :::21 :::* LISTEN 0 121510369 119/vsftpd tcp6 0 0 :::8082 :::* LISTEN 1000 121510908 452/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1000 121511886 314/io.admin.0 udp 0 0 127.0.0.53:53 0.0.0.0:* 106 121511340 109/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 121509870 1/init udp6 0 0 :::111 :::* 0 121509872 1/init *** Log File - Last 25 Lines *** 2024-07-17 09:14:56.295 - info: host.Iobroker instance system.adapter.echarts.0 started with pid 407 2024-07-17 09:14:57.057 - info: echarts.0 (407) starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.echarts, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:15:00.016 - info: host.Iobroker instance system.adapter.dwd.0 started with pid 422 2024-07-17 09:15:01.062 - info: dwd.0 (422) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:15:01.117 - info: vis.0 (429) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.vis, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:15:01.881 - info: vis.0 (429) Terminated (NO_ERROR): Without reason 2024-07-17 09:15:02.393 - info: dwd.0 (422) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-07-17 09:15:02.418 - info: host.Iobroker instance system.adapter.vis.0 terminated while should be started once 2024-07-17 09:15:02.913 - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-07-17 09:15:04.369 - info: host.Iobroker instance system.adapter.web.0 started with pid 452 2024-07-17 09:15:05.317 - info: web.0 (452) starting. Version 6.2.5 in /opt/iobroker/node_modules/iobroker.web, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:15:05.459 - info: web.0 (452) socket.io server listening on port 8082 2024-07-17 09:15:05.462 - info: web.0 (452) http server listening on port 8082 2024-07-17 09:20:00.013 - info: host.Iobroker instance system.adapter.dwd.0 started with pid 482 2024-07-17 09:20:00.862 - info: dwd.0 (482) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:20:02.293 - info: dwd.0 (482) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-07-17 09:20:02.815 - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-07-17 09:25:00.013 - info: host.Iobroker instance system.adapter.dwd.0 started with pid 497 2024-07-17 09:25:00.853 - info: dwd.0 (497) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:25:01.955 - info: dwd.0 (497) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-07-17 09:25:02.479 - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-07-17 09:30:00.013 - info: host.Iobroker instance system.adapter.dwd.0 started with pid 585 2024-07-17 09:30:00.868 - info: dwd.0 (585) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:30:02.374 - info: dwd.0 (585) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-07-17 09:30:02.894 - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============ Mark until here for C&P =============
iob diag has finished.
Skript v.2024-05-22 *** BASE SYSTEM *** Static hostname: Iobroker Icon name: computer-container Chassis: container Virtualization: lxc Operating System: Ubuntu 22.04.4 LTS Kernel: Linux 6.5.11-8-pve Architecture: x86-64 model name : Intel(R) Core(TM) i5-5250U CPU @ 1.60GHz Docker : false Virtualization : lxc Kernel : x86_64 Userland : 64 bit Systemuptime and Load: 09:30:15 up 15 min, 3 users, load average: 0.12, 0.09, 0.24 CPU threads: 2 *** Time and Time Zones *** Local time: Wed 2024-07-17 09:30:15 UTC Universal time: Wed 2024-07-17 09:30:15 UTC RTC time: n/a Time zone: Etc/UTC (UTC, +0000) System clock synchronized: yes NTP service: inactive RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': root HOME=/root GROUPS=root User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev *** Display-Server-Setup *** Display-Server: false Desktop: Terminal: Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.1G 536M 3.3G 0.0K 223M 3.6G Swap: 4.1G 0B 4.1G Total: 8.2G 536M 7.4G Active iob-Instances: 6 4096 M total memory 536 M used memory 609 M active memory 107 M inactive memory 3336 M free memory 0 M buffer memory 223 M swap cache 4096 M total swap 0 M used swap 4096 M free swap *** top - Table Of Processes *** top - 09:30:15 up 15 min, 3 users, load average: 0.12, 0.09, 0.24 Tasks: 35 total, 1 running, 34 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 3.2 sy, 0.0 ni, 96.8 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 4096.0 total, 3335.9 free, 536.5 used, 223.7 buff/cache MiB Swap: 4096.0 total, 4096.0 free, 0.0 used. 3559.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * run-rpc_pipefs.mount loaded failed failed RPC Pipe File System LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 1 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/mapper/pve-vm--245--disk--0 ext4 30G 4.3G 24G 16% / none tmpfs 492K 4.0K 488K 1% /dev efivarfs efivarfs 128K 125K 0 100% /sys/firmware/efi/efivars tmpfs tmpfs 7.8G 0 7.8G 0% /dev/shm tmpfs tmpfs 3.1G 112K 3.1G 1% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock Messages concerning ext4 filesystem in dmesg: dmesg: read kernel buffer failed: Operation not permitted Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mapper/pve-vm--245--disk--0 ext4 rw,relatime,stripe=16 |-/run tmpfs tmpfs rw,nosuid,nodev,size=3249876k,nr_inodes=819200,mode=755,uid=100000,gid=100000,inode64 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k,uid=100000,gid=100000,inode64 | `-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 |-/dev none tmpfs rw,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev,uid=100000,gid=100000,inode64 | |-/dev/mqueue mqueue mqueue rw,relatime | |-/dev/.lxc/proc proc proc rw,relatime | |-/dev/.lxc/sys sys sysfs rw,relatime | |-/dev/full udev[/full] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/null udev[/null] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/random udev[/random] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/tty udev[/tty] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/urandom udev[/urandom] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/zero udev[/zero] devtmpfs rw,nosuid,relatime,size=8091020k,nr_inodes=2022755,mode=755,inode64 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/ptmx devpts[/ptmx] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/console devpts[/0] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | |-/dev/tty1 devpts[/1] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 | `-/dev/tty2 devpts[/2] devpts rw,nosuid,noexec,relatime,gid=100005,mode=620,ptmxmode=666,max=1026 |-/proc proc proc rw,nosuid,nodev,noexec,relatime | |-/proc/sys proc[/sys] proc ro,relatime | | |-/proc/sys/net proc[/sys/net] proc rw,nosuid,nodev,noexec,relatime | | |-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime | | `-/proc/sys/kernel/random/boot_id none[/.lxc-boot-id] tmpfs ro,nosuid,nodev,noexec,relatime,size=492k,mode=755,uid=100000,gid=100000,inode64 | |-/proc/sysrq-trigger proc[/sysrq-trigger] proc ro,relatime | |-/proc/cpuinfo lxcfs[/proc/cpuinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/diskstats lxcfs[/proc/diskstats] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/loadavg lxcfs[/proc/loadavg] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/meminfo lxcfs[/proc/meminfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/slabinfo lxcfs[/proc/slabinfo] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/stat lxcfs[/proc/stat] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | |-/proc/swaps lxcfs[/proc/swaps] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other | `-/proc/uptime lxcfs[/proc/uptime] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other `-/sys sysfs sysfs ro,nosuid,nodev,noexec,relatime |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime |-/sys/devices/virtual/net sysfs[/devices/virtual/net] sysfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime |-/sys/kernel/security securityfs securityfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime |-/sys/firmware/efi/efivars efivarfs efivarfs rw,nosuid,nodev,noexec,relatime |-/sys/fs/cgroup none cgroup2 rw,nosuid,nodev,noexec,relatime `-/sys/devices/system/cpu lxcfs[/sys/devices/system/cpu] fuse.lxcfs rw,nosuid,nodev,relatime,user_id=0,group_id=0,allow_other Files in neuralgic directories: /var: 699M /var/ 365M /var/cache 359M /var/cache/apt 284M /var/lib 260M /var/cache/apt/archives Archived and active journals take up 48.0M in the file system. /opt/iobroker/backups: 397M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 593M /opt/iobroker/iobroker-data/ 468M /opt/iobroker/iobroker-data/files 142M /opt/iobroker/iobroker-data/files/vis-2 89M /opt/iobroker/iobroker-data/files/echarts.admin 87M /opt/iobroker/iobroker-data/backup-objects The five largest files in iobroker-data are: 34M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.map 24M /opt/iobroker/iobroker-data/files/echarts/static/js/main.2b7495c2.js.map 24M /opt/iobroker/iobroker-data/files/echarts.admin/chart/static/js/main.2b7495c2.js.map 23M /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.245b61c0.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.4 /usr/bin/node v18.20.4 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.4-1nodesource1 Candidate: 18.20.4-1nodesource1 Version table: *** 18.20.4-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 100 /var/lib/dpkg/status 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages 12.22.9~dfsg-1ubuntu3.6 500 500 http://archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages 500 http://archive.ubuntu.com/ubuntu jammy-security/universe amd64 Packages 12.22.9~dfsg-1ubuntu3 500 500 http://archive.ubuntu.com/ubuntu jammy/universe amd64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 7.1.6 nodejs modules from github: 2 | +-- syno@3.0.0 (git+https://git@github.com/MeisterTR/syno.git#0104a973d33fe332aa6b1ab5be7fe8c57d3c68b0) +-- iobroker.vr200@1.1.0 (git+ssh://git@github.com/Eisbaeeer/ioBroker.vr200.git#e55ff645b6a6d6b12e23535b15b81a0de68ee676) Adapter State + system.adapter.admin.0 : admin : Iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : Iobroker - enabled system.adapter.discovery.0 : discovery : Iobroker - disabled system.adapter.dwd.0 : dwd : Iobroker - enabled + system.adapter.echarts.0 : echarts : Iobroker - enabled system.adapter.email.0 : email : Iobroker - disabled system.adapter.fb-checkpresence.0 : fb-checkpresence : Iobroker - disabled system.adapter.flot.0 : flot : Iobroker - disabled system.adapter.fritzdect.1 : fritzdect : Iobroker - disabled system.adapter.history.0 : history : Iobroker - disabled system.adapter.hm-rega.0 : hm-rega : Iobroker - disabled system.adapter.hm-rega.1 : hm-rega : Iobroker - disabled system.adapter.hm-rpc.0 : hm-rpc : Iobroker - disabled, port: 0 system.adapter.hm-rpc.1 : hm-rpc : Iobroker - disabled, port: 0 system.adapter.hm-rpc.2 : hm-rpc : Iobroker - disabled, port: 0 system.adapter.homeconnect.0 : homeconnect : Iobroker - disabled system.adapter.hue.0 : hue : Iobroker - disabled, port: 443 system.adapter.info.0 : info : Iobroker - disabled system.adapter.javascript.0 : javascript : Iobroker - disabled + system.adapter.modbus.0 : modbus : Iobroker - enabled system.adapter.modbus.1 : modbus : Iobroker - disabled system.adapter.mqtt.0 : mqtt : Iobroker - disabled, port: 1883, bind: 192.168.178.65 system.adapter.netatmo-crawler.0 : netatmo-crawler : Iobroker - disabled system.adapter.nut.0 : nut : Iobroker - disabled system.adapter.ping.0 : ping : Iobroker - disabled system.adapter.shelly.0 : shelly : Iobroker - disabled, port: 1882, bind: 0.0.0.0 system.adapter.sonos.0 : sonos : Iobroker - disabled system.adapter.statistics.0 : statistics : Iobroker - disabled system.adapter.stiebel-isg.0 : stiebel-isg : Iobroker - disabled system.adapter.synology.0 : synology : Iobroker - disabled, port: 5000 system.adapter.tr-064.0 : tr-064 : Iobroker - disabled system.adapter.vis-2.0 : vis-2 : Iobroker - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : Iobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : Iobroker - disabled system.adapter.vis-justgage.0 : vis-justgage : Iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : Iobroker - disabled system.adapter.vis.0 : vis : Iobroker - enabled system.adapter.vr200.0 : vr200 : Iobroker - disabled system.adapter.weather-warnings.0 : weather-warnings : Iobroker - disabled + system.adapter.web.0 : web : Iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : Iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.web.0 : web : Iobroker - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.17.14 , installed 6.13.16 [Updatable] Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "discovery" : 4.5.0 , installed 4.5.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 1.7.2 , installed 1.7.2 Adapter "email" : 1.3.1 , installed 1.3.1 Adapter "fb-checkpresence": 1.2.4 , installed 1.2.4 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 4.0.0 , installed 4.0.0 Adapter "hm-rpc" : 1.17.0 , installed 1.16.0 [Updatable] Adapter "homeconnect" : 1.4.0 , installed 1.4.0 Adapter "hue" : 3.11.0 , installed 3.11.0 Adapter "javascript" : 8.3.1 , installed 7.1.6 [Updatable] Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "modbus" : 6.2.3 , installed 6.2.3 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nut" : 1.6.0 , installed 1.6.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "shelly" : 7.0.0 , installed 7.0.0 Adapter "simple-api" : 2.8.0 , installed 2.8.0 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonos" : 3.0.0 , installed 3.0.0 Adapter "statistics" : 2.4.0 , installed 2.4.0 Adapter "stiebel-isg" : 1.7.7 , installed 1.7.7 Adapter "synology" : 3.1.0 , installed 3.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vr200" : 1.0.0 , installed 1.1.0 Adapter "weather-warnings": 0.6.7 , installed 0.6.7 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Objects and States Please stand by - This may take a while Objects: 5810 States: 4883 *** OS-Repositories and Updates *** Hit:1 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:2 http://archive.ubuntu.com/ubuntu jammy InRelease Hit:3 http://archive.ubuntu.com/ubuntu jammy-updates InRelease Hit:4 http://archive.ubuntu.com/ubuntu jammy-security InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:25 0.0.0.0:* LISTEN 0 121511600 287/master tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1000 121511504 112/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1000 121511747 112/iobroker.js-con tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 121509869 1/init tcp 0 0 127.0.0.53:53 0.0.0.0:* LISTEN 106 121511341 109/systemd-resolve tcp6 0 0 ::1:25 :::* LISTEN 0 121511601 287/master tcp6 0 0 :::111 :::* LISTEN 0 121509871 1/init tcp6 0 0 :::22 :::* LISTEN 0 121510252 1/init tcp6 0 0 :::21 :::* LISTEN 0 121510369 119/vsftpd tcp6 0 0 :::8082 :::* LISTEN 1000 121510908 452/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1000 121511886 314/io.admin.0 udp 0 0 127.0.0.53:53 0.0.0.0:* 106 121511340 109/systemd-resolve udp 0 0 0.0.0.0:111 0.0.0.0:* 0 121509870 1/init udp6 0 0 :::111 :::* 0 121509872 1/init *** Log File - Last 25 Lines *** 2024-07-17 09:14:56.295 - info: host.Iobroker instance system.adapter.echarts.0 started with pid 407 2024-07-17 09:14:57.057 - info: echarts.0 (407) starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.echarts, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:15:00.016 - info: host.Iobroker instance system.adapter.dwd.0 started with pid 422 2024-07-17 09:15:01.062 - info: dwd.0 (422) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:15:01.117 - info: vis.0 (429) starting. Version 1.5.6 in /opt/iobroker/node_modules/iobroker.vis, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:15:01.881 - info: vis.0 (429) Terminated (NO_ERROR): Without reason 2024-07-17 09:15:02.393 - info: dwd.0 (422) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-07-17 09:15:02.418 - info: host.Iobroker instance system.adapter.vis.0 terminated while should be started once 2024-07-17 09:15:02.913 - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-07-17 09:15:04.369 - info: host.Iobroker instance system.adapter.web.0 started with pid 452 2024-07-17 09:15:05.317 - info: web.0 (452) starting. Version 6.2.5 in /opt/iobroker/node_modules/iobroker.web, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:15:05.459 - info: web.0 (452) socket.io server listening on port 8082 2024-07-17 09:15:05.462 - info: web.0 (452) http server listening on port 8082 2024-07-17 09:20:00.013 - info: host.Iobroker instance system.adapter.dwd.0 started with pid 482 2024-07-17 09:20:00.862 - info: dwd.0 (482) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:20:02.293 - info: dwd.0 (482) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-07-17 09:20:02.815 - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-07-17 09:25:00.013 - info: host.Iobroker instance system.adapter.dwd.0 started with pid 497 2024-07-17 09:25:00.853 - info: dwd.0 (497) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:25:01.955 - info: dwd.0 (497) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-07-17 09:25:02.479 - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2024-07-17 09:30:00.013 - info: host.Iobroker instance system.adapter.dwd.0 started with pid 585 2024-07-17 09:30:00.868 - info: dwd.0 (585) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.20.4, js-controller: 5.0.19 2024-07-17 09:30:02.374 - info: dwd.0 (585) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2024-07-17 09:30:02.894 - info: host.Iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============ Mark until here for C&P =============
iob diag has finished.
MOD-EDIT: Code in code-tags gesetzt!
-
@cappy_451 sagte in IOBroker Restore History Daten Problem:
nun scheitere ich beim wiederherstellend er historischen Daten.
wie willst du das durchführen?
Wenn du
@cappy_451 sagte in IOBroker Restore History Daten Problem:Die Konfiguration habe ich mit dem backup Adapter wiederhergestellt,
sollte auch die History mit hergestellt werden, wenn du diese ebenfalls mit Backitup gesichert hattest.
-
@cappy_451 sagte in IOBroker Restore History Daten Problem:
Local time: Wed 2024-07-17 09:30:15 UTC Universal time: Wed 2024-07-17 09:30:15 UTCSetz die Zeitzone schon mal richtig.
root
HOME=/root
GROUPS=rootHampel nicht als root durch den Container. User anlegen.
Boot Target: graphical.target
boot target multi-user setzen.
-
@homoran
der History Adapter wird ja auch wiederhergestellt, nur beim wiederherstellen der geloggten Daten kommt es immer wider zum Abbruch des Restore.backitup.0 2024-07-16 09:57:29.691 error [historyDB] Error: EACCES: permission denied, stat '/opt/iobroker/iobroker-data/history/20221102'
-
@cappy_451 sagte in IOBroker Restore History Daten Problem:
20221102
ist das der älteste Eintrag?
befinden sich trotzdem schon Daten unter /opt/iobroker/iobroker-data/history?
-
Hallo,
ich bin jetzt noch einmal her gegangen und habe das ganze System unter Proxmox komplett neu aufgesetzt, anschließend
die Konfiguration zurückgespielt und den History Adapter gestartetDie Daten werden ganz normal in History Ordner in dem entsprechenden Unterordner für den Tag abgelegt.
So sehen die Rechte für den Ordner aus.
drwxrwxr-x+ 3 iobroker iobroker 4096 Jul 17 10:59 history
Dann bin ich her gegangen und habe ein Backup der aktuellen History Daten gemacht und anschließen wieder zurück gespielt.
Hat alles funktionier ohne Fehler.So sehen die Rechte für den Ordner aus.
drwxr-xr-x+ 3 iobroker iobroker 4096 Jul 17 10:59 history
Jetzt kommt es, ich habe nun das Backup der historischen daten genommen welches ich von dem Iobroker welches unter Windows läuft
gemacht habe und dies zurück gespielt. Dies bricht natürlich wie die ganze Zeit mit Fehler ab und nun sehen die Rechte vom History Ordner so aus.drw-r--r--+ 3 iobroker iobroker 4096 Jul 16 22:00 history
Hat jemand eine Erklärung dafür, was dort passiert?? Warum werden die Rechte bei diesem Backup verändert?????????
-
@cappy_451 sagte in IOBroker Restore History Daten Problem:
Hat jemand eine Erklärung dafür, was dort passiert?? Warum werden die Rechte bei diesem Backup verändert?????????
Ich hab oben schon mal gefragt, wo und wie die Backupdatei herkommt.
Wo/wie kommt die Windows auf das System? Gemountete Freigabe? Von Hand irgendwie herüber kopiert?
Je nach Konstellation schleppst du da die falschen Rechte ein.
Und die Rechte bei ACLs kannst du nicht per Bits auslesen, das geht nur per
getfacl /pfad/zur/datei -
@cappy_451 sagte in IOBroker Restore History Daten Problem:
komplett neu aufgesetzt
wie???
wieder als root? -
@thomas-braun
Ich sichere die Dateien per FTP auf ein NAS und greife dann per FTP für das Restore auf die Datei zu.Sind den in dem Backup Rechte mit drin? Ich dachte bis her, dass die Daten einfach nur gepackt würden.
Das könnte da Ganze natürlich erklären mit den Rechten, würde aber auch heißen, dass man diese daten dann so nicht zurückspielen kann, oder gibt es da eine Möglichkeit das Rechte Problem zu umgehen?
-
@homoran
Ich habe diese Anleitung genommen:
https://www.iobroker.net/docu/index-20.htm?page_id=5358&lang=de und dan diese
https://www.iobroker.net/#de/documentation/install/linux.mdDort wird immer als root installiert oder nicht?
Gibt es eine Anleitung wo man das nicht als root macht?
-
@cappy_451 sagte in IOBroker Restore History Daten Problem:
Dort wird immer als root installiert oder nicht?
die erste Doku stammt aus 2014-18 und ist vollkommen veraltet. Damals gab es noch keine Rechteverwaltung, die prüfe ich jetzt nicht
in der zweiten (aktuellen) Doku steht gaaaanz oben
KEINE Installation von ioBroker als root User!
