NEWS
Keine Updates / Fehlende Adapter Ansicht
ioBroker Allgemein
36
Beiträge
6
Kommentatoren
3.1k
Aufrufe
4
Watching
-
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
denke leider ich muss das System wirklich neu machen.
Das sowieso. Ein 32Bit-Buster ist halt eh schon geraume Zeit verstorben.
Neu aufsetzen, iobroker 'leer' installieren, vorhandenes Backup wieder einspielen, fertig. Dauert 'ne Stunde, je nach Umfang der Installation.
@thomas-braun habe nun einen neuen Raspi mit Iobroker.
Ich suche grade verzweifelt nach der Möglichkeit ein Backup einzuspielen.
Eines erstellen klappt - aber ich finde den Button zur Wiederherstellung nicht :-(
Gruß Yoda
Stand 05.2025
Raspberry5,linux,arm64,CPUs:4,Geschwindigkeit:2400 MHz,Modell:Cortex-A76,RAM:15.8 GB,Node.js:v20.19.2 -
@thomas-braun habe nun einen neuen Raspi mit Iobroker.
Ich suche grade verzweifelt nach der Möglichkeit ein Backup einzuspielen.
Eines erstellen klappt - aber ich finde den Button zur Wiederherstellung nicht :-(@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
aber ich finde den Button zur Wiederherstellung nicht
sieh mal in die Sidebar ;-)
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
aber ich finde den Button zur Wiederherstellung nicht
sieh mal in die Sidebar ;-)
-
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
denke leider ich muss das System wirklich neu machen.
Das sowieso. Ein 32Bit-Buster ist halt eh schon geraume Zeit verstorben.
Neu aufsetzen, iobroker 'leer' installieren, vorhandenes Backup wieder einspielen, fertig. Dauert 'ne Stunde, je nach Umfang der Installation.
@thomas-braun @thomas-braun ich habe das System nun neu gemacht, alles schick auch mit den Bildern Lokal speichern.
Meine Daten sehen nun wie unten aus.Nur der simple-api bekomme ch nicht am laufen, kann aber jetzt auch nicht sagen das ich Negative Auswirkungen deswegen sehe.
Habt ihr da noch einen Tip für michsimple-api.0 2024-05-24 13:43:27.478 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason simple-api.0 2024-05-24 13:43:27.473 error Cannot create webserver: TypeError: Cannot read properties of undefined (reading 'createServerAsync') simple-api.0 2024-05-24 13:43:27.438 info starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v18.20.3, js-controller: 5.0.19======== Start marking the full check here =========
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.28+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:36:50 up 9 min, 4 users, load average: 1.72, 2.13, 1.42 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-05-24 13:36:50 CEST Universal time: Fri 2024-05-24 11:36:50 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render ne tdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 594M 17M 1.0G 1.5G Swap: 104M 0B 104M Total: 4.1G 2.4G 699M Active iob-Instances: 26 3792 M total memory 2330 M used memory 2483 M active memory 577 M inactive memory 567 M free memory 52 M buffer memory 934 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 13:36:50 up 9 min, 4 users, load average: 1.72, 2.13, 1.42 Tasks: 241 total, 1 running, 240 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 14.3 sy, 0.0 ni, 85.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3792.1 total, 565.4 free, 2331.7 used, 987.2 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 1460.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 378M 1% /run /dev/mmcblk0p2 ext4 58G 11G 45G 20% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 75M 436M 15% /boot/firmware tmpfs tmpfs 380M 40K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri May 24 13:26:58 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:41:85:01 vc_mem. mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty 1 root=PARTUUID=9aa16d6b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splas h plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Fri May 24 13:27:01 2024] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967 -4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none. [Fri May 24 13:27:03 2024] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1 f5-1b5927e6c5f9 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityf s rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino= 5492 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_mi sc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=1668360k,nr_inodes=417090,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipef s rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,g id=1000 | |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfs d-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1000/doc portal fuse.port al rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname= mixed,errors=remount-ro Files in neuralgic directories: /var: 923M /var/ 536M /var/cache 529M /var/cache/apt 416M /var/cache/apt/archives 197M /var/lib Archived and active journals take up 87.9M in the file system. /opt/iobroker/backups: 728M /opt/iobroker/backups/ 1.5M /opt/iobroker/backups/Neuer Ordner /opt/iobroker/iobroker-data: 776M /opt/iobroker/iobroker-data/ 638M /opt/iobroker/iobroker-data/files 179M /opt/iobroker/iobroker-data/files/vis-2 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/states.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.3d563dc9.js.m ap 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56. js.map 31M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.m ap USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please alw ays prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 P ackages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.3.1 nodejs modules from github: 2 +-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/iobroker-community- adapters/ioBroker.sourceanalytix.git#9c4635239c7b9321601dcf0fcdd8677a55a8b13f) `-- iobroker.zendure-solarflow@1.6.1 (git+ssh://git@github.com/nograx/ioBroker.z endure-solarflow.git#b56b690481e55f1b06d4a8d6e76895221748ffd6) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.3 : cloud : raspberrypi - enabled system.adapter.deconz.0 : deconz : raspberrypi - disabled, port: 80 system.adapter.devices.0 : devices : raspberrypi - disabled system.adapter.deyeidc.0 : deyeidc : raspberrypi - disabled, port: 8899 + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.email.1 : email : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.info.0 : info : raspberrypi - disabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.lgtv.0 : lgtv : raspberrypi - disabled system.adapter.mobile.0 : mobile : raspberrypi - disabled system.adapter.mqtt.0 : mqtt : raspberrypi - disabled, port: 1886, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admi n system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-history.0 : vis-history : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - disabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admi n + system.adapter.zendure-solarflow.0 : zendure-solarflow : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admi n + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admi n ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "broadlink2" : 2.2.0 , installed 2.2.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "deyeidc" : 0.0.14 , installed 0.0.14 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "email" : 1.3.0 , installed 1.3.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "hue" : 3.11.0 , installed 3.11.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "iot" : 3.2.2 , installed 3.2.2 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "onvif" : 1.1.3 , installed 1.1.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.9.0 , installed 6.9.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.2.1 , installed 3.2.1 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "tuya" : 3.15.0 , installed 3.15.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-energy": 0.3.11, installed 0.3.11 Adapter "vis-2-widgets-gauges": 1.0.3, installed 1.0.3 Adapter "vis-2-widgets-material": 1.3.25, installed 1.3.25 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "zendure-solarflow": 1.5.3, installed 1.6.1 Objects and States Please stand by - This may take a while Objects: 42481 States: 39476 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 9671 787/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 6985 787/iobroker.js-con tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 7465 786/cupsd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 12866 2208/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8224 837/sshd: /usr/sbin tcp6 0 0 :::5900 :::* LISTEN 992 7769 821/wayvnc tcp6 0 0 :::8095 :::* LISTEN 1001 12824 2285/io.onvif.0 tcp6 0 0 :::8081 :::* LISTEN 1001 10222 1664/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 10818 2410/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 8235 837/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 7464 786/cupsd udp 0 0 192.168.178.133:5353 0.0.0.0:* 1001 10683 2209/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7304 552/avahi-daemon: r udp 0 0 0.0.0.0:38821 0.0.0.0:* 1001 10532 2144/io.broadlink2. udp 0 0 0.0.0.0:59590 0.0.0.0:* 1001 10531 2144/io.broadlink2. udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 13584 2222/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 13585 2222/io.tuya.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 9154 1442/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 12050 2144/io.broadlink2. udp 0 0 0.0.0.0:53927 0.0.0.0:* 104 7306 552/avahi-daemon: r udp 0 0 0.0.0.0:60083 0.0.0.0:* 1001 12648 2144/io.broadlink2. udp6 0 0 :::5353 :::* 104 7305 552/avahi-daemon: r udp6 0 0 :::37124 :::* 104 7307 552/avahi-daemon: r udp6 0 0 fe80::d68f:e843:de6:546 :::* 0 8144 678/NetworkManager *** Log File - Last 25 Lines *** 2024-05-24 13:37:24.024 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 20.81undefined 2024-05-24 13:37:27.280 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.273undefined 2024-05-24 13:37:27.393 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.563undefined 2024-05-24 13:37:28.488 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 29.423undefined 2024-05-24 13:37:29.050 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 12.011undefined 2024-05-24 13:37:30.787 - info: tuya.0 (2222) bf28a342545afcead8nqea: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.74:6668 2024-05-24 13:37:31.806 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 15.796undefined 2024-05-24 13:37:33.554 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 10.043undefined 2024-05-24 13:37:34.386 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 21.701undefined 2024-05-24 13:37:35.520 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 24.056undefined 2024-05-24 13:37:41.157 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.71undefined 2024-05-24 13:37:43.939 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 15.039undefined 2024-05-24 13:37:44.952 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 3.768undefined 2024-05-24 13:37:47.119 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 16.638undefined 2024-05-24 13:37:47.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 21.953undefined 2024-05-24 13:37:51.508 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 19.077undefined 2024-05-24 13:37:51.535 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 11.423undefined 2024-05-24 13:37:52.966 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.95undefined 2024-05-24 13:37:53.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 12.937undefined 2024-05-24 13:37:54.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 14.299undefined 2024-05-24 13:37:55.942 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 11.776undefined 2024-05-24 13:37:58.926 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.899undefined 2024-05-24 13:38:01.071 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 22.256undefined 2024-05-24 13:38:02.023 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.475undefined 2024-05-24 13:38:03.939 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 10.363undefined============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
Gruß Yoda
Stand 05.2025
Raspberry5,linux,arm64,CPUs:4,Geschwindigkeit:2400 MHz,Modell:Cortex-A76,RAM:15.8 GB,Node.js:v20.19.2 -
@thomas-braun @thomas-braun ich habe das System nun neu gemacht, alles schick auch mit den Bildern Lokal speichern.
Meine Daten sehen nun wie unten aus.Nur der simple-api bekomme ch nicht am laufen, kann aber jetzt auch nicht sagen das ich Negative Auswirkungen deswegen sehe.
Habt ihr da noch einen Tip für michsimple-api.0 2024-05-24 13:43:27.478 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason simple-api.0 2024-05-24 13:43:27.473 error Cannot create webserver: TypeError: Cannot read properties of undefined (reading 'createServerAsync') simple-api.0 2024-05-24 13:43:27.438 info starting. Version 2.7.2 in /opt/iobroker/node_modules/iobroker.simple-api, node: v18.20.3, js-controller: 5.0.19======== Start marking the full check here =========
Skript v.2024-04-21 *** BASE SYSTEM *** Static hostname: raspberrypi Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.6.28+rpt-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.1 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 13:36:50 up 9 min, 4 users, load average: 1.72, 2.13, 1.42 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Fri 2024-05-24 13:36:50 CEST Universal time: Fri 2024-05-24 11:36:50 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': pi HOME=/home/pi GROUPS=pi adm dialout cdrom sudo audio video plugdev games users input render ne tdev lpadmin gpio i2c spi iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** Display-Server-Setup *** Display-Server: true Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 4.0G 2.4G 594M 17M 1.0G 1.5G Swap: 104M 0B 104M Total: 4.1G 2.4G 699M Active iob-Instances: 26 3792 M total memory 2330 M used memory 2483 M active memory 577 M inactive memory 567 M free memory 52 M buffer memory 934 M swap cache 99 M total swap 0 M used swap 99 M free swap *** top - Table Of Processes *** top - 13:36:50 up 9 min, 4 users, load average: 1.72, 2.13, 1.42 Tasks: 241 total, 1 running, 240 sleeping, 0 stopped, 0 zombie %Cpu(s): 0.0 us, 14.3 sy, 0.0 ni, 85.7 id, 0.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 3792.1 total, 565.4 free, 2331.7 used, 987.2 buff/cache MiB Swap: 100.0 total, 100.0 free, 0.0 used. 1460.4 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 1.6G 0 1.6G 0% /dev tmpfs tmpfs 380M 1.4M 378M 1% /run /dev/mmcblk0p2 ext4 58G 11G 45G 20% / tmpfs tmpfs 1.9G 148K 1.9G 1% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 75M 436M 15% /boot/firmware tmpfs tmpfs 380M 40K 380M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri May 24 13:26:58 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.ena ble_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=DC:A6:32:41:85:01 vc_mem. mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty 1 root=PARTUUID=9aa16d6b-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splas h plymouth.ignore-serial-consoles cfg80211.ieee80211_regdom=DE [Fri May 24 13:27:01 2024] EXT4-fs (mmcblk0p2): mounted filesystem fc7a1f9e-4967 -4f41-a1f5-1b5927e6c5f9 ro with ordered data mode. Quota mode: none. [Fri May 24 13:27:03 2024] EXT4-fs (mmcblk0p2): re-mounted fc7a1f9e-4967-4f41-a1 f5-1b5927e6c5f9 r/w. Quota mode: none. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime |-/sys sysfs sysfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/security securityfs securityf s rw,nosuid,nodev,noexec,relatime | |-/sys/fs/cgroup cgroup2 cgroup2 rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot | |-/sys/fs/pstore pstore pstore rw,nosuid,nodev,noexec,relatime | |-/sys/fs/bpf bpf bpf rw,nosuid,nodev,noexec,relatime,mode=700 | |-/sys/kernel/debug debugfs debugfs rw,nosuid,nodev,noexec,relatime | |-/sys/kernel/tracing tracefs tracefs rw,nosuid,nodev,noexec,relatime | |-/sys/fs/fuse/connections fusectl fusectl rw,nosuid,nodev,noexec,relatime | `-/sys/kernel/config configfs configfs rw,nosuid,nodev,noexec,relatime |-/proc proc proc rw,relatime | `-/proc/sys/fs/binfmt_misc systemd-1 autofs rw,relatime,fd=29,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino= 5492 | `-/proc/sys/fs/binfmt_misc binfmt_misc binfmt_mi sc rw,nosuid,nodev,noexec,relatime |-/dev udev devtmpfs rw,nosuid,relatime,size=1668360k,nr_inodes=417090,mode=755 | |-/dev/pts devpts devpts rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000 | |-/dev/shm tmpfs tmpfs rw,nosuid,nodev | `-/dev/mqueue mqueue mqueue rw,nosuid,nodev,noexec,relatime |-/run tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=388308k,mode=755 | |-/run/lock tmpfs tmpfs rw,nosuid,nodev,noexec,relatime,size=5120k | |-/run/credentials/systemd-sysctl.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-sysusers.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | |-/run/rpc_pipefs sunrpc rpc_pipef s rw,relatime | |-/run/credentials/systemd-tmpfiles-setup.service ramfs ramfs ro,nosuid,nodev,noexec,relatime,mode=700 | `-/run/user/1000 tmpfs tmpfs rw,nosuid,nodev,relatime,size=388304k,nr_inodes=97076,mode=700,uid=1000,g id=1000 | |-/run/user/1000/gvfs gvfsd-fuse fuse.gvfs d-fuse rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 | `-/run/user/1000/doc portal fuse.port al rw,nosuid,nodev,relatime,user_id=1000,group_id=1000 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname= mixed,errors=remount-ro Files in neuralgic directories: /var: 923M /var/ 536M /var/cache 529M /var/cache/apt 416M /var/cache/apt/archives 197M /var/lib Archived and active journals take up 87.9M in the file system. /opt/iobroker/backups: 728M /opt/iobroker/backups/ 1.5M /opt/iobroker/backups/Neuer Ordner /opt/iobroker/iobroker-data: 776M /opt/iobroker/iobroker-data/ 638M /opt/iobroker/iobroker-data/files 179M /opt/iobroker/iobroker-data/files/vis-2 138M /opt/iobroker/iobroker-data/files/javascript.admin 118M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 38M /opt/iobroker/iobroker-data/states.jsonl 38M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.3d563dc9.js.m ap 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56. js.map 31M /opt/iobroker/iobroker-data/objects.jsonl 24M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.135279a0.js.m ap USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please alw ays prefer the links 'by-id': No Devices found 'by-id' *** NodeJS-Installation *** /usr/bin/nodejs v18.20.3 /usr/bin/node v18.20.3 /usr/bin/npm 10.7.0 /usr/bin/npx 10.7.0 /usr/bin/corepack 0.28.0 nodejs: Installed: 18.20.3-1nodesource1 Candidate: 18.20.3-1nodesource1 Version table: *** 18.20.3-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.20.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.19.0+dfsg-6~deb12u1 500 500 http://deb.debian.org/debian-security bookworm-security/main arm64 P ackages 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.19 admin: 6.13.16 javascript: 8.3.1 nodejs modules from github: 2 +-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/iobroker-community- adapters/ioBroker.sourceanalytix.git#9c4635239c7b9321601dcf0fcdd8677a55a8b13f) `-- iobroker.zendure-solarflow@1.6.1 (git+ssh://git@github.com/nograx/ioBroker.z endure-solarflow.git#b56b690481e55f1b06d4a8d6e76895221748ffd6) Adapter State + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.broadlink2.0 : broadlink2 : raspberrypi - enabled + system.adapter.cloud.3 : cloud : raspberrypi - enabled system.adapter.deconz.0 : deconz : raspberrypi - disabled, port: 80 system.adapter.devices.0 : devices : raspberrypi - disabled system.adapter.deyeidc.0 : deyeidc : raspberrypi - disabled, port: 8899 + system.adapter.discovery.0 : discovery : raspberrypi - enabled + system.adapter.email.1 : email : raspberrypi - enabled system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.fritzdect.0 : fritzdect : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hmip.0 : hmip : raspberrypi - enabled + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : raspberrypi - disabled system.adapter.info.0 : info : raspberrypi - disabled + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled system.adapter.lgtv.0 : lgtv : raspberrypi - disabled system.adapter.mobile.0 : mobile : raspberrypi - disabled system.adapter.mqtt.0 : mqtt : raspberrypi - disabled, port: 1886, bind: 0.0.0.0 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admi n system.adapter.sonoff.0 : sonoff : raspberrypi - disabled, port: 1883, bind: 0.0.0.0 + system.adapter.sourceanalytix.0 : sourceanalytix : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.text2command.0 : text2command : raspberrypi - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypi - enabled + system.adapter.tuya.0 : tuya : raspberrypi - enabled system.adapter.vis-2-widgets-energy.0 : vis-2-widgets-energy : raspberrypi - disabled system.adapter.vis-2-widgets-gauges.0 : vis-2-widgets-gauges : raspberrypi - disabled system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: raspberrypi - disabled + system.adapter.vis-2.0 : vis-2 : raspberrypi - enabled system.adapter.vis-bars.0 : vis-bars : raspberrypi - disabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : raspberrypi - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : raspberrypi - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-history.0 : vis-history : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : raspberrypi - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : raspberrypi - disabled system.adapter.vis-justgage.0 : vis-justgage : raspberrypi - disabled system.adapter.vis-lcars.0 : vis-lcars : raspberrypi - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admi n + system.adapter.zendure-solarflow.0 : zendure-solarflow : raspberrypi - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admi n + system.adapter.hue.0 : hue : raspberrypi - enabled, port: 443 + system.adapter.onvif.0 : onvif : raspberrypi - enabled, port: 80, 7575, 8000, 8080, 8081, 8899 + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 system.adapter.simple-api.0 : simple-api : raspberrypi - enabled, port: 8087, bind: 0.0.0.0, run as: admi n + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : raspberrypi - enabled, port: 8082, bind: 0.0.0.0, run as: admi n ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "broadlink2" : 2.2.0 , installed 2.2.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "deyeidc" : 0.0.14 , installed 0.0.14 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "email" : 1.3.0 , installed 1.3.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "hue" : 3.11.0 , installed 3.11.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "iot" : 3.2.2 , installed 3.2.2 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "onvif" : 1.1.3 , installed 1.1.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.9.0 , installed 6.9.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.2.1 , installed 3.2.1 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "tuya" : 3.15.0 , installed 3.15.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-energy": 0.3.11, installed 0.3.11 Adapter "vis-2-widgets-gauges": 1.0.3, installed 1.0.3 Adapter "vis-2-widgets-material": 1.3.25, installed 1.3.25 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "zendure-solarflow": 1.5.3, installed 1.6.1 Objects and States Please stand by - This may take a while Objects: 42481 States: 39476 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 http://deb.debian.org/debian bookworm InRelease Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease Hit:4 http://deb.debian.org/debian bookworm-updates InRelease Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 9671 787/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 6985 787/iobroker.js-con tcp 0 0 127.0.0.1:631 0.0.0.0:* LISTEN 0 7465 786/cupsd tcp 0 0 0.0.0.0:1882 0.0.0.0:* LISTEN 1001 12866 2208/io.shelly.0 tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 8224 837/sshd: /usr/sbin tcp6 0 0 :::5900 :::* LISTEN 992 7769 821/wayvnc tcp6 0 0 :::8095 :::* LISTEN 1001 12824 2285/io.onvif.0 tcp6 0 0 :::8081 :::* LISTEN 1001 10222 1664/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 10818 2410/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 8235 837/sshd: /usr/sbin tcp6 0 0 ::1:631 :::* LISTEN 0 7464 786/cupsd udp 0 0 192.168.178.133:5353 0.0.0.0:* 1001 10683 2209/io.tr-064.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 7304 552/avahi-daemon: r udp 0 0 0.0.0.0:38821 0.0.0.0:* 1001 10532 2144/io.broadlink2. udp 0 0 0.0.0.0:59590 0.0.0.0:* 1001 10531 2144/io.broadlink2. udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 13584 2222/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 13585 2222/io.tuya.0 udp 0 0 0.0.0.0:631 0.0.0.0:* 0 9154 1442/cups-browsed udp 0 0 0.0.0.0:15001 0.0.0.0:* 1001 12050 2144/io.broadlink2. udp 0 0 0.0.0.0:53927 0.0.0.0:* 104 7306 552/avahi-daemon: r udp 0 0 0.0.0.0:60083 0.0.0.0:* 1001 12648 2144/io.broadlink2. udp6 0 0 :::5353 :::* 104 7305 552/avahi-daemon: r udp6 0 0 :::37124 :::* 104 7307 552/avahi-daemon: r udp6 0 0 fe80::d68f:e843:de6:546 :::* 0 8144 678/NetworkManager *** Log File - Last 25 Lines *** 2024-05-24 13:37:24.024 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 20.81undefined 2024-05-24 13:37:27.280 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.273undefined 2024-05-24 13:37:27.393 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.563undefined 2024-05-24 13:37:28.488 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 29.423undefined 2024-05-24 13:37:29.050 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 12.011undefined 2024-05-24 13:37:30.787 - info: tuya.0 (2222) bf28a342545afcead8nqea: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.74:6668 2024-05-24 13:37:31.806 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 15.796undefined 2024-05-24 13:37:33.554 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 10.043undefined 2024-05-24 13:37:34.386 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 21.701undefined 2024-05-24 13:37:35.520 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 24.056undefined 2024-05-24 13:37:41.157 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.71undefined 2024-05-24 13:37:43.939 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 15.039undefined 2024-05-24 13:37:44.952 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 3.768undefined 2024-05-24 13:37:47.119 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 16.638undefined 2024-05-24 13:37:47.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 21.953undefined 2024-05-24 13:37:51.508 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 19.077undefined 2024-05-24 13:37:51.535 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 11.423undefined 2024-05-24 13:37:52.966 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.95undefined 2024-05-24 13:37:53.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 12.937undefined 2024-05-24 13:37:54.927 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 14.299undefined 2024-05-24 13:37:55.942 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 11.776undefined 2024-05-24 13:37:58.926 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 17.899undefined 2024-05-24 13:38:01.071 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 22.256undefined 2024-05-24 13:38:02.023 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 13.475undefined 2024-05-24 13:38:03.939 - info: javascript.0 (2077) script.js.Pool.Pool-Solar-Steuerung-2: 10.363undefined============ Mark until here for C&P =============
iob diag has finished.
Press any key for a summary
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
Nur der simple-api bekomme ch nicht am laufen,
Dürfte sich mit einer aktuellen Version des Adapters einrenken. Einfach abwarten und dann aktualisieren.
-
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
Nur der simple-api bekomme ch nicht am laufen,
Dürfte sich mit einer aktuellen Version des Adapters einrenken. Einfach abwarten und dann aktualisieren.
@thomas-braun sagte in Keine Updates / Fehlende Adapter Ansicht:
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
Nur der simple-api bekomme ch nicht am laufen,
Dürfte sich mit einer aktuellen Version des Adapters einrenken. Einfach abwarten und dann aktualisieren.
Alles klar Danke, dann warte ich einfach....
Gruß Yoda
Stand 05.2025
Raspberry5,linux,arm64,CPUs:4,Geschwindigkeit:2400 MHz,Modell:Cortex-A76,RAM:15.8 GB,Node.js:v20.19.2 -
@thomas-braun sagte in Keine Updates / Fehlende Adapter Ansicht:
@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
Nur der simple-api bekomme ch nicht am laufen,
Dürfte sich mit einer aktuellen Version des Adapters einrenken. Einfach abwarten und dann aktualisieren.
Alles klar Danke, dann warte ich einfach....
@yoda
simple-api 2.8.0 ist schon seit gestern im LATEST Repository verfügbar.
Bitte mal damit testen.
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer Danke sagen will, kann nen Kaffee spendieren: https://paypal.me/mcm1957atiobroker
-
@yoda
simple-api 2.8.0 ist schon seit gestern im LATEST Repository verfügbar.Bitte mal damit testen.
@mcm1957 sagte in Keine Updates / Fehlende Adapter Ansicht:
@yoda
simple-api 2.8.0 ist schon seit gestern im LATEST Repository verfügbar.Bitte mal damit testen.
ist auch unter Expertenmodus nicht sichtbar.....
Gruß Yoda
Stand 05.2025
Raspberry5,linux,arm64,CPUs:4,Geschwindigkeit:2400 MHz,Modell:Cortex-A76,RAM:15.8 GB,Node.js:v20.19.2 -
@mcm1957 sagte in Keine Updates / Fehlende Adapter Ansicht:
@yoda
simple-api 2.8.0 ist schon seit gestern im LATEST Repository verfügbar.Bitte mal damit testen.
ist auch unter Expertenmodus nicht sichtbar.....
@yoda
.. im LATEST repository...Du bist stable unterwegs was an sich OK ist - nur dann kriegst du die Version ev. erst in ca 2 bis 4 Wochen...
Entwicklung u Betreuung: envertech-pv, hoymiles-ms, ns-client, pid, snmp Adapter;
Support Repositoryverwaltung.Wer Danke sagen will, kann nen Kaffee spendieren: https://paypal.me/mcm1957atiobroker
-
@thomas-braun sagte in Keine Updates / Fehlende Adapter Ansicht:
iob upgrade
habe ich gemacht- aber wird weiterhin nicht angezeigt....login as: pi pi@192.168.178.133's password: Linux raspberrypi 6.6.28+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.28-1+rpt1 (2024-04-22) aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Fri May 24 13:36:06 2024 from 192.168.178.166 pi@raspberrypi:~ $ iob update Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "broadlink2" : 2.2.0 , installed 2.2.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "deyeidc" : 0.0.14 , installed 0.0.14 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "email" : 1.3.0 , installed 1.3.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "hue" : 3.11.0 , installed 3.11.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "iot" : 3.2.2 , installed 3.2.2 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "onvif" : 1.1.3 , installed 1.1.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.9.0 , installed 6.9.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.2.1 , installed 3.2.1 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "tuya" : 3.15.0 , installed 3.15.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-energy": 0.3.11, installed 0.3.11 Adapter "vis-2-widgets-gauges": 1.0.3, installed 1.0.3 Adapter "vis-2-widgets-material": 1.3.25, installed 1.3.25 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "zendure-solarflow": 1.5.3, installed 1.6.1 pi@raspberrypi:~ $ iob upgrade All adapters are up to date pi@raspberrypi:~ $Gruß Yoda
Stand 05.2025
Raspberry5,linux,arm64,CPUs:4,Geschwindigkeit:2400 MHz,Modell:Cortex-A76,RAM:15.8 GB,Node.js:v20.19.2 -
@thomas-braun sagte in Keine Updates / Fehlende Adapter Ansicht:
iob upgrade
habe ich gemacht- aber wird weiterhin nicht angezeigt....login as: pi pi@192.168.178.133's password: Linux raspberrypi 6.6.28+rpt-rpi-v8 #1 SMP PREEMPT Debian 1:6.6.28-1+rpt1 (2024-04-22) aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Fri May 24 13:36:06 2024 from 192.168.178.166 pi@raspberrypi:~ $ iob update Used repository: stable Adapter "admin" : 6.13.16 , installed 6.13.16 Adapter "alexa2" : 3.26.5 , installed 3.26.5 Adapter "backitup" : 2.11.0 , installed 2.11.0 Adapter "broadlink2" : 2.2.0 , installed 2.2.0 Adapter "cloud" : 5.0.1 , installed 5.0.1 Adapter "deconz" : 1.4.1 , installed 1.4.1 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "deyeidc" : 0.0.14 , installed 0.0.14 Adapter "discovery" : 4.4.0 , installed 4.4.0 Adapter "email" : 1.3.0 , installed 1.3.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hmip" : 1.22.0 , installed 1.22.0 Adapter "hue" : 3.11.0 , installed 3.11.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "iot" : 3.2.2 , installed 3.2.2 Adapter "javascript" : 8.3.1 , installed 8.3.1 Controller "js-controller": 5.0.19 , installed 5.0.19 Adapter "lgtv" : 2.2.0 , installed 2.2.0 Adapter "mobile" : 1.0.1 , installed 1.0.1 Adapter "mqtt" : 5.2.0 , installed 5.2.0 Adapter "onvif" : 1.1.3 , installed 1.1.3 Adapter "scenes" : 2.3.9 , installed 2.3.9 Adapter "shelly" : 6.9.0 , installed 6.9.0 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.7.0 , installed 6.7.0 Adapter "sonoff" : 3.0.3 , installed 3.0.3 Adapter "telegram" : 3.2.1 , installed 3.2.1 Adapter "text2command" : 3.0.3 , installed 3.0.3 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "tuya" : 3.15.0 , installed 3.15.0 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "vis-2" : 2.9.32 , installed 2.9.32 Adapter "vis-2-widgets-energy": 0.3.11, installed 0.3.11 Adapter "vis-2-widgets-gauges": 1.0.3, installed 1.0.3 Adapter "vis-2-widgets-material": 1.3.25, installed 1.3.25 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-colorpicker": 2.0.3 , installed 2.0.3 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.5.1 , installed 1.5.1 Adapter "vis-inventwo" : 3.3.4 , installed 3.3.4 Adapter "vis-jqui-mfd" : 1.1.1 , installed 1.1.1 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-lcars" : 1.1.1 , installed 1.1.1 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.9 , installed 2.5.9 Adapter "web" : 6.2.5 , installed 6.2.5 Adapter "ws" : 2.6.1 , installed 2.6.1 Adapter "zendure-solarflow": 1.5.3, installed 1.6.1 pi@raspberrypi:~ $ iob upgrade All adapters are up to date pi@raspberrypi:~ $@yoda sagte in Keine Updates / Fehlende Adapter Ansicht:
Used repository: stable
Da ist es noch nicht drin. Muss erst durch latest/beta durch.
-
@yoda
.. im LATEST repository...Du bist stable unterwegs was an sich OK ist - nur dann kriegst du die Version ev. erst in ca 2 bis 4 Wochen...
@mcm1957 sagte in Keine Updates / Fehlende Adapter Ansicht:
@yoda
.. im LATEST repository...Du bist stable unterwegs was an sich OK ist - nur dann kriegst du die Version ev. erst in ca 2 bis 4 Wochen...
oki verstanden - habs eben umgestellt - und werde es gleich wieder instable ändern.
Adapter Läuft.
Danke euch beiden @Thomas-Braun und @mcm1957
393
Online32.5k
Benutzer81.7k
Themen1.3m
Beiträge