Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[tombox]

@stefan1984 der gtoken fehler verhindert ein korrekte Arbeitsweise ich bräuchte mal dein account um das zu beheben
tombox2020@gmail.com

[VierlingMt]

@stefan1984 du kannst die spalten auch einstellen. schau mal:

Alternativ lösche mal den Objektbaum "dps" und starte den Adapter neu. ggfs. durch die Versionen verschluckt?

anbei nochmal der ganze objektbaum

[Stefan1984]

@tombox sagte in Test Adapter eufy Home Robovac:

@stefan1984 der gtoken fehler verhindert ein korrekte Arbeitsweise ich bräuchte mal dein account um das zu beheben
tombox2020@gmail.com

Habe Dir eine Email geschickt. Was brauchst Du genau für die Behebung? Eufy Account? IoBroker? Zugang oder nur den Benutzernamen?

[Stefan1984]

@tombox Danke für die schnelle Unterstützung. Sieht gut aus. Bisher keine roten Protokolle mehr. Falls sich was ändert, dann melde ich mich dazu nochmal. Objekte in ioBroker sind jetzt auch alle benannt. Funktioniert also.

Vielen, vielen Dank.

Ist Deine Änderung etwas was Du bei jedem Account machen musst, oder war das jetzt Zufall und hilft auch anderen Nutzern?

Stefan

[tombox]

@stefan1984 War ein genereller Bug der jedem Nutzer hilft

[Stefan1984]

@tombox Bis jetzt läuft der Adapter super. Alle Fehlermeldungen sind weg, Objektnamen werden komplett dargestellt. Ich kann den X10 über ioBroker starten und nach Hause schicken. Ausserdem läuft der Adapter bisher stabil.

Vielen Dank für Deine Arbeit und Deine Zeit.

Wie kann es weitergehen? Was ist noch geplant? Anbei ein paar Wünsche, die bestimmt auch anderen Nutzern gefallen werden:

• Zugriff auf die in der App erstellten Szenarien über ioBroker (z.B. zur Verwendung per Blockly)
• Einstellen des manuellen Modus über ioBroker (z.B. Start saugen ohne wischen, Start intensives wischen ohne saugen, etc)
• Gezieltes Arbeiten ein einzelnen Räumen (mache die Küche sauber) - wäre aber alternativ auch über Szenarien möglich

Wie kann ich als Tester dabei unterstützen? @VierlingMt ist bestimmt auch dabei.

Grüße,
Stefan

[bmueller77]

Hallo,

ich habe kürzlich einen X10 Pro Omni gekauft und kann ihn auch über die App sehen und steuern. Der Login mit dem Adapter funktioniert auch einwandfrei. Allerdings wurden keine Objekte angelegt und im Log findet sich die Meldung "Found 0 devices".

[tombox]

@bmueller77 Bitte Beitrag #1 beachten und benutzen

[bmueller77]

@tombox Hab ich glatt übersehen... Danke. Funktioniert.

[BananaJoe]

@tombox ich habe hier ein scheinbar neues Modell G50: https://www.amazon.de/dp/B0CR5N9SM3
Das Anbinden über den Adapter funktionierte (per MQTT), Steuerung scheint nicht möglich zu sein, die Fehlermeldung auf alles im Log ist immer

error: euhome.0 (996356) Device not found for undefined

Das hat er beim Versuch etwas zu starten gebracht, jetzt saugt Ding gerade und bringt diese Meldung ebenfalls mehrmals pro Minute.

es gibt den Datenpunkt 15 wo ich zumindest einige Befehle sehe (in der Auswahl und in den Eigenschaften), aber wie geschrieben obige Fehlermeldung.

Falls du mal schauen willst kann ich dir gerne die App-Zugangsdaten zur Verfügung stellen, schreib mich einfach über den Chat an.

Edit: Bei der Installation gab es allerdings auch folgende Warnmeldungen (als Info)

2024-05-19 13:50:27.345  - info: host.iobroker iobroker npm WARN While resolving: @iobroker/adapter-core@3.1.4npm WARN Found: @iobroker/types@5.0.20-alpha.0-20240508-d36cddc8dnpm WARN node_modules/iobroker.admin/node_modules/@iobroker/typesnpm WARN   @iobroker/types@"5.0.20-alpha.0-20240508-d36cddc8d" from iobroker.admin@6.17.7npm WARN   node_modules/iobroker.adminnpm WARN     iobroker.admin@"6.17.7" from the root projectnpm WARN npm WARN Could not resolve dependency:npm WARN peer @iobroker/types@"^5.0.11" from @iobroker/adapter-core@3.1.4npm WARN node_modules/iobroker.admin/node_modules/@iobroker/adapter-corenpm WARN   @iobroker/adapter-core@"^3.1.4" from iobroker.admin@6.17.7npm WARN   node_modules/iobroker.adminnpm WARN npm WARN Conflicting peer dependency: @iobroker/types@5.0.19npm WARN node_modules/@iobroker/typesnpm WARN   peer @iobroker/types@"^5.0.11" from @iobroker/adapter-core@3.1.4
2024-05-19 13:50:27.346  - info: host.iobroker iobroker npm WARN   node_modules/iobroker.admin/node_modules/@iobroker/adapter-corenpm WARN     @iobroker/adapter-core@"^3.1.4" from iobroker.admin@6.17.7npm WARN     node_modules/iobroker.admin

Die Kurzfassung von iob diag für die Versionen:

======================= SUMMARY =======================
                        v.2024-04-21


 Static hostname: iobroker
       Icon name: computer-vm
         Chassis: vm
  Virtualization: vmware
Operating System: Ubuntu 22.04.4 LTS
          Kernel: Linux 5.15.0-102-generic
    Architecture: x86-64
 Hardware Vendor: VMware, Inc.
  Hardware Model: VMware Virtual Platform

Installation:           vmware
Kernel:                 x86_64
Userland:               64 bit
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1002
Display-Server:         false
Boot Target:            graphical.target

Pending OS-Updates:     41
Pending iob updates:    1

Nodejs-Installation:
/usr/bin/nodejs         v18.20.2
/usr/bin/node           v18.20.2
/usr/bin/npm            10.5.0
/usr/bin/npx            10.5.0
/usr/bin/corepack       0.25.2

Recommended versions are nodejs 18.20.2 and npm 10.5.0
Your nodejs installation is correct

MEMORY:
               total        used        free      shared  buff/cache   available
Mem:             11G        8.0G        1.3G        8.0M        2.7G        3.6G
Swap:           2.0G        1.7G        359M
Total:           14G        9.7G        1.6G

Active iob-Instances:   61
Active repo(s): beta

ioBroker Core:          js-controller           5.0.19
                        admin                   6.17.7

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: redis

Status admin and web instance:
  system.adapter.admin.0                  : admin                 : iobroker                                 - disabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.admin.1                  : admin                 : iobroker                                 - disabled, port: 60081, bind: 0.0.0.0, run as: admin
+ system.adapter.admin.2                  : admin                 : iobroker                                 -  enabled, port: 60082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.1                    : web                   : iobroker                                 -  enabled, port: 60008, bind: 0.0.0.0, run as: admin

Objects:                43473
States:                 40150

Size of iob-Database:

75M     /opt/iobroker/iobroker-data/objects.jsonl
24M     /opt/iobroker/iobroker-data/objects.json.migrated
24M     /opt/iobroker/iobroker-data/objects.json.bak.migrated
1.8M    /opt/iobroker/iobroker-data/states.json.bak
1.8M    /opt/iobroker/iobroker-data/states.json



=================== END OF SUMMARY ====================

und die Langfassung:

Skript v.2024-04-21

*** BASE SYSTEM ***
 Static hostname: iobroker
       Icon name: computer-vm
         Chassis: vm
  Virtualization: vmware
Operating System: Ubuntu 22.04.4 LTS
          Kernel: Linux 5.15.0-102-generic
    Architecture: x86-64
 Hardware Vendor: VMware, Inc.
  Hardware Model: VMware Virtual Platform

model name      : AMD FX-9830P RADEON R7, 12 COMPUTE CORES 4C+8G
Docker          : false
Virtualization  : vmware
Kernel          : x86_64
Userland        : 64 bit

Systemuptime and Load:
 13:57:45 up 36 days, 15:13,  4 users,  load average: 1.78, 1.39, 1.15
CPU threads: 4


*** Time and Time Zones ***
               Local time: Sun 2024-05-19 13:57:45 CEST
           Universal time: Sun 2024-05-19 11:57:45 UTC
                 RTC time: Sun 2024-05-19 11:57:45
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: n/a
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
bananajoe
HOME=/home/bananajoe
GROUPS=bananajoe sudo

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video redis

*** Display-Server-Setup ***
Display-Server: false
Desktop:
Terminal:
Boot Target:    graphical.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:             11G        7.9G        1.4G        8.0M        2.7G        3.7G
Swap:           2.0G        1.7G        359M
Total:           14G        9.6G        1.8G

Active iob-Instances:   61

        11957 M total memory
         7882 M used memory
         4566 M active memory
         4830 M inactive memory
         1419 M free memory
          550 M buffer memory
         2104 M swap cache
         2047 M total swap
         1688 M used swap
          359 M free swap

*** top - Table Of Processes  ***
top - 13:57:45 up 36 days, 15:13,  4 users,  load average: 1.72, 1.39, 1.15
Tasks: 404 total,   1 running, 403 sleeping,   0 stopped,   0 zombie
%Cpu(s): 16.9 us,  6.2 sy,  0.0 ni, 75.4 id,  0.0 wa,  0.0 hi,  1.5 si,  0.0 st
MiB Mem :  11957.5 total,   1419.0 free,   7883.7 used,   2654.8 buff/cache
MiB Swap:   2048.0 total,    359.2 free,   1688.8 used.   3747.7 avail Mem

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* openipmi.service loaded failed failed LSB: OpenIPMI Driver init script

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.
1 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type   Size  Used Avail Use% Mounted on
tmpfs          tmpfs  1.2G  3.0M  1.2G   1% /run
/dev/sda2      ext4    63G   28G   33G  47% /
tmpfs          tmpfs  5.9G     0  5.9G   0% /dev/shm
tmpfs          tmpfs  5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs   64M     0   64M   0% /RAMdisk
tmpfs          tmpfs  1.2G  4.0K  1.2G   1% /run/user/0

Messages concerning ext4 filesystem in dmesg:
[Fri Apr 12 22:44:39 2024] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
[Fri Apr 12 22:44:40 2024] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.

Show mounted filesystems:
TARGET                                        SOURCE                 FSTYPE      OPTIONS
/                                             /dev/sda2              ext4        rw,relatime
|-/sys                                        sysfs                  sysfs       rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security                      securityfs             securityfs  rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                            cgroup2                cgroup2     rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore                            pstore                 pstore      rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf                               bpf                    bpf         rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug                         debugfs                debugfs     rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing                       tracefs                tracefs     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections                  fusectl                fusectl     rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config                        configfs               configfs    rw,nosuid,nodev,noexec,relatime
|-/proc                                       proc                   proc        rw,nosuid,nodev,noexec,relatime
| `-/proc/sys/fs/binfmt_misc                  systemd-1              autofs      rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=1211
|   `-/proc/sys/fs/binfmt_misc                binfmt_misc            binfmt_misc rw,nosuid,nodev,noexec,relatime
|-/dev                                        udev                   devtmpfs    rw,nosuid,relatime,size=6064224k,nr_inodes=1516056,mode=755,inode64
| |-/dev/pts                                  devpts                 devpts      rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                                  tmpfs                  tmpfs       rw,nosuid,nodev,inode64
| |-/dev/hugepages                            hugetlbfs              hugetlbfs   rw,relatime,pagesize=2M
| `-/dev/mqueue                               mqueue                 mqueue      rw,nosuid,nodev,noexec,relatime
|-/run                                        tmpfs                  tmpfs       rw,nosuid,nodev,noexec,relatime,size=1224444k,mode=755,inode64
| |-/run/lock                                 tmpfs                  tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k,inode64
| |-/run/user/0                               tmpfs                  tmpfs       rw,nosuid,nodev,relatime,size=1224440k,nr_inodes=306110,mode=700,inode64
| |-/run/credentials/systemd-sysusers.service none                   ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/rpc_pipefs                           sunrpc                 rpc_pipefs  rw,relatime
| `-/run/snapd/ns                             tmpfs[/snapd/ns]       tmpfs       rw,nosuid,nodev,noexec,relatime,size=1224444k,mode=755,inode64
|   `-/run/snapd/ns/lxd.mnt                   nsfs[mnt:[4026532603]] nsfs        rw
|-/RAMdisk                                    tmpfs                  tmpfs       rw,nosuid,nodev,relatime,size=65536k,inode64
|-/snap/lxd/28463                             /dev/loop0             squashfs    ro,nodev,relatime,errors=continue
|-/snap/core18/2812                           /dev/loop1             squashfs    ro,nodev,relatime,errors=continue
|-/snap/core20/2264                           /dev/loop3             squashfs    ro,nodev,relatime,errors=continue
|-/snap/core22/1122                           /dev/loop5             squashfs    ro,nodev,relatime,errors=continue
|-/snap/core20/2318                           /dev/loop7             squashfs    ro,nodev,relatime,errors=continue
|-/snap/snapd/21184                           /dev/loop9             squashfs    ro,nodev,relatime,errors=continue
|-/snap/core22/1380                           /dev/loop6             squashfs    ro,nodev,relatime,errors=continue
|-/snap/snapd/21465                           /dev/loop10            squashfs    ro,nodev,relatime,errors=continue
|-/snap/lxd/28322                             /dev/loop8             squashfs    ro,nodev,relatime,errors=continue
`-/snap/core18/2823                           /dev/loop4             squashfs    ro,nodev,relatime,errors=continue

Files in neuralgic directories:

/var:
9.5G    /var/
4.7G    /var/log
4.6G    /var/lib
4.2G    /var/log/journal/26010950dd3a4d9ab8f579561945c3da
4.2G    /var/log/journal

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
Archived and active journals take up 8.0M in the file system.

/opt/iobroker/backups:
1.1G    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
1.4G    /opt/iobroker/iobroker-data/
1.1G    /opt/iobroker/iobroker-data/files
237M    /opt/iobroker/iobroker-data/files/vis.0
176M    /opt/iobroker/iobroker-data/files/vis-2
172M    /opt/iobroker/iobroker-data/backup-objects

The five largest files in iobroker-data are:
75M     /opt/iobroker/iobroker-data/objects.jsonl
38M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.d3d286bd.js.map
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
24M     /opt/iobroker/iobroker-data/objects.json.migrated

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2190370-if00

Your zigbee.0 COM-Port is matching 'by-id'. Very good!

HINT:
Your zigbee.1 COM-Port is NOT matching 'by-id'. Please check your setting:
tcp

HINT:
Your zigbee.2 COM-Port is NOT matching 'by-id'. Please check your setting:
tcp

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.20.2
/usr/bin/node           v18.20.2
/usr/bin/npm            10.5.0
/usr/bin/npx            10.5.0
/usr/bin/corepack       0.25.2


nodejs:
  Installed: 18.20.2-1nodesource1
  Candidate: 18.20.2-1nodesource1
  Version table:
 *** 18.20.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
        100 /var/lib/dpkg/status
     18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main amd64 Packages
     12.22.9~dfsg-1ubuntu3.5 500
        500 http://de.archive.ubuntu.com/ubuntu jammy-updates/universe amd64 Packages
        500 http://de.archive.ubuntu.com/ubuntu jammy-security/universe amd64 Packages
     12.22.9~dfsg-1ubuntu3 500
        500 http://de.archive.ubuntu.com/ubuntu jammy/universe amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: redis

Core adapters versions
js-controller:  5.0.19
admin:          6.17.7
javascript:     8.3.1

nodejs modules from github:     7
+-- iobroker.alexa2@3.26.5 (git+ssh://git@github.com/Apollon77/ioBroker.alexa2.git#37160cf729a9c70ca70679d4b1d3c16ba51c6456)
+-- iobroker.energiefluss@3.6.0 (git+ssh://git@github.com/SKB-CGN/ioBroker.energiefluss.git#1b2f62380b39ac21b8a94853d76b4acf6c395111)
+-- iobroker.google-sharedlocations@2.2.1 (git+ssh://git@github.com/Garfonso/ioBroker.google-sharedlocations.git#0db73d57d00aa5dff22ff22e853f1231ce141dc1)
+-- iobroker.klipper-moonraker@0.0.4 (git+ssh://git@github.com/DrozmotiX/ioBroker.klipper-moonraker.git#4adef3ab69e5ff232d0d740fe3e0f560bca3c27e)
+-- iobroker.life360@0.2.22 (git+ssh://git@github.com/MiGoller/ioBroker.life360.git#23166aab1b2e36d917a9b7b480d9faa7f73ca2d1)
+-- iobroker.notificationforandroidtv@2.3.0 (git+ssh://git@github.com/DNAngelX/ioBroker.notificationforandroidtv.git#d9fc47833dbc17e1a499494050b2df31bf7ec23d)
+-- iobroker.smartstate@0.0.4 (git+ssh://git@github.com/ChriD/ioBroker.smartstate.git#aa448478fd656fff055532b33decd1138d9222e3)

Adapter State
  system.adapter.admin.0                  : admin                 : iobroker                                 - disabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin
  system.adapter.admin.1                  : admin                 : iobroker                                 - disabled, port: 60081, bind: 0.0.0.0, run as: admin
+ system.adapter.admin.2                  : admin                 : iobroker                                 -  enabled, port: 60082, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa-shoppinglist.0     : alexa-shoppinglist    : iobroker                                 -  enabled
+ system.adapter.alexa-timer-vis.0        : alexa-timer-vis       : iobroker                                 -  enabled
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
  system.adapter.alias-manager.0          : alias-manager         : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
+ system.adapter.broadlink2.0             : broadlink2            : iobroker                                 -  enabled
  system.adapter.daswetter.0              : daswetter             : iobroker                                 -  enabled
+ system.adapter.device-reminder.0        : device-reminder       : iobroker                                 -  enabled
  system.adapter.devices.0                : devices               : iobroker                                 -  enabled
+ system.adapter.discovery.0              : discovery             : iobroker                                 -  enabled
  system.adapter.dwd.0                    : dwd                   : iobroker                                 -  enabled
+ system.adapter.echarts.0                : echarts               : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: iobroker                                 -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : iobroker                                 -  enabled
  system.adapter.euhome.0                 : euhome                : iobroker                                 - disabled
  system.adapter.feiertage.0              : feiertage             : iobroker                                 -  enabled
+ system.adapter.followthesun.0           : followthesun          : iobroker                                 -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : iobroker                                 -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker                                 -  enabled
+ system.adapter.google-sharedlocations.0 : google-sharedlocations: iobroker                                 -  enabled
  system.adapter.ical.0                   : ical                  : iobroker                                 -  enabled
+ system.adapter.iot.0                    : iot                   : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
+ system.adapter.javascript.1             : javascript            : iobroker                                 -  enabled
  system.adapter.klipper-moonraker.0      : klipper-moonraker     : iobroker                                 - disabled
+ system.adapter.life360.0                : life360               : iobroker                                 -  enabled
+ system.adapter.logparser.0              : logparser             : iobroker                                 -  enabled
+ system.adapter.midea.0                  : midea                 : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.notificationforandroidtv.0: notificationforandroidtv: iobroker                                 -  enabled
+ system.adapter.nut.0                    : nut                   : iobroker                                 -  enabled
+ system.adapter.nut.1                    : nut                   : iobroker                                 -  enabled
+ system.adapter.operating-hours.0        : operating-hours       : iobroker                                 -  enabled
  system.adapter.pi-hole.0                : pi-hole               : iobroker                                 - disabled
+ system.adapter.pi-hole.1                : pi-hole               : iobroker                                 -  enabled
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
+ system.adapter.puppeteer.0              : puppeteer             : iobroker                                 -  enabled
+ system.adapter.pvforecast.0             : pvforecast            : iobroker                                 -  enabled
+ system.adapter.pvforecast.1             : pvforecast            : iobroker                                 -  enabled
  system.adapter.pylontech.0              : pylontech             : iobroker                                 - disabled, port: 4196
+ system.adapter.rest-api.0               : rest-api              : iobroker                                 -  enabled, port: 8093, bind: 0.0.0.0, run as: admin
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.shelly.1                 : shelly                : iobroker                                 - disabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
  system.adapter.smartstate.0             : smartstate            : iobroker                                 - disabled
+ system.adapter.snmp.0                   : snmp                  : iobroker                                 -  enabled
+ system.adapter.socketio.0               : socketio              : iobroker                                 -  enabled, port: 60084, bind: 0.0.0.0, run as: admin
+ system.adapter.sourceanalytix.0         : sourceanalytix        : iobroker                                 -  enabled
+ system.adapter.sql.0                    : sql                   : iobroker                                 -  enabled, port: 3306
+ system.adapter.tankerkoenig.0           : tankerkoenig          : iobroker                                 -  enabled
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.2               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.3               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.text2command.0           : text2command          : iobroker                                 -  enabled
+ system.adapter.time-switch.0            : time-switch           : iobroker                                 -  enabled
+ system.adapter.tr-064.0                 : tr-064                : iobroker                                 -  enabled
+ system.adapter.tr-064.1                 : tr-064                : iobroker                                 -  enabled
+ system.adapter.traccar.0                : traccar               : iobroker                                 -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : iobroker                                 -  enabled
+ system.adapter.tuya.0                   : tuya                  : iobroker                                 -  enabled
  system.adapter.vis-2-widgets-energy.0   : vis-2-widgets-energy  : iobroker                                 -  enabled
  system.adapter.vis-2-widgets-gauges.0   : vis-2-widgets-gauges  : iobroker                                 -  enabled
  system.adapter.vis-2-widgets-material.0 : vis-2-widgets-material: iobroker                                 -  enabled
+ system.adapter.vis-2.0                  : vis-2                 : iobroker                                 -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : iobroker                                 -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : iobroker                                 -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : iobroker                                 -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : iobroker                                 -  enabled
  system.adapter.vis-map.0                : vis-map               : iobroker                                 -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.1                    : web                   : iobroker                                 -  enabled, port: 60008, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : iobroker                                 -  enabled, port: 60086, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2190370-if00
+ system.adapter.zigbee.1                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.1.249:6638
+ system.adapter.zigbee.2                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.1.208:6638

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.2                  : admin                 : iobroker                                 -  enabled, port: 60082, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.rest-api.0               : rest-api              : iobroker                                 -  enabled, port: 8093, bind: 0.0.0.0, run as: admin
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.simple-api.0             : simple-api            : iobroker                                 -  enabled, port: 8087, bind: 0.0.0.0, run as: admin
+ system.adapter.socketio.0               : socketio              : iobroker                                 -  enabled, port: 60084, bind: 0.0.0.0, run as: admin
+ system.adapter.sql.0                    : sql                   : iobroker                                 -  enabled, port: 3306
+ system.adapter.telegram.0               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.1               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.2               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.telegram.3               : telegram              : iobroker                                 -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.web.1                    : web                   : iobroker                                 -  enabled, port: 60008, bind: 0.0.0.0, run as: admin
+ system.adapter.ws.0                     : ws                    : iobroker                                 -  enabled, port: 60086, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : iobroker                                 -  enabled, port: /dev/serial/by-id/usb-dresden_elektronik_ingenieurtechnik_GmbH_ConBee_II_DE2190370-if00
+ system.adapter.zigbee.1                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.1.249:6638
+ system.adapter.zigbee.2                 : zigbee                : iobroker                                 -  enabled, port: tcp://192.168.1.208:6638

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.17.7   , installed 6.17.7
Adapter    "alexa-shoppinglist": 0.1.5, installed 0.1.5
Adapter    "alexa-timer-vis": 0.3.0  , installed 0.3.0
Adapter    "alexa2"       : 3.26.5   , installed 3.26.5
Adapter    "alias-manager": 1.2.6    , installed 1.2.6
Adapter    "backitup"     : 2.11.0   , installed 2.11.0
Adapter    "broadlink2"   : 2.2.0    , installed 2.2.0
Adapter    "daswetter"    : 3.1.13   , installed 3.1.13
Adapter    "device-reminder": 3.1.2  , installed 3.1.2
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "discovery"    : 4.5.0    , installed 4.5.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "echarts"      : 1.7.2    , installed 1.7.2
Adapter    "email"        : 1.3.0    , installed 1.3.0
Adapter    "energiefluss" : 3.6.0    , installed 3.6.0
Adapter    "energiefluss-erweitert": 0.4.1, installed 0.4.1
Adapter    "feiertage"    : 1.2.0    , installed 1.2.0
Adapter    "followthesun" : 0.5.0    , installed 0.5.0
Adapter    "fritzdect"    : 2.5.9    , installed 2.5.9
Adapter    "fullybrowser" : 3.0.12   , installed 3.0.12
Adapter    "ical"         : 1.15.0   , installed 1.15.0
Adapter    "iot"          : 3.3.0    , installed 3.3.0
Adapter    "javascript"   : 8.3.1    , installed 8.3.1
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "logparser"    : 2.2.2    , installed 2.2.2
Adapter    "midea"        : 0.0.7    , installed 0.0.7
Adapter    "mqtt"         : 5.2.0    , installed 5.2.0
Adapter    "nut"          : 1.6.0    , installed 1.6.0
Adapter    "operating-hours": 1.0.6  , installed 1.0.6
Adapter    "pi-hole"      : 1.3.6    , installed 1.3.6
Adapter    "ping"         : 1.6.2    , installed 1.6.2
Adapter    "puppeteer"    : 0.2.8    , installed 0.2.8
Adapter    "pvforecast"   : 2.9.1    , installed 2.9.1
Adapter    "pylontech"    : 0.0.10   , installed 0.0.10
Adapter    "rest-api"     : 1.1.0    , installed 1.1.0
Adapter    "shelly"       : 7.0.0    , installed 7.0.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "snmp"         : 3.2.0    , installed 3.2.0
Adapter    "socketio"     : 6.7.0    , installed 6.7.0
Adapter    "sourceanalytix": 0.4.14  , installed 0.4.14
Adapter    "sql"          : 2.2.0    , installed 2.2.0
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 3.2.1    , installed 3.2.1
Adapter    "text2command" : 3.0.3    , installed 3.0.3
Adapter    "time-switch"  : 2.2.2    , installed 2.2.2
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "traccar"      : 1.1.4    , installed 1.1.4
Adapter    "trashschedule": 3.3.0    , installed 3.3.0
Adapter    "tuya"         : 3.15.0   , installed 3.15.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.9.63   , installed 2.9.63
Adapter    "vis-2-widgets-energy": 0.3.11, installed 0.3.11
Adapter    "vis-2-widgets-gauges": 1.0.3, installed 1.0.3
Adapter    "vis-2-widgets-material": 1.3.32, installed 1.3.32
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-hqwidgets": 1.5.1    , installed 1.5.1
Adapter    "vis-icontwo"  : 1.5.0    , installed 1.5.0
Adapter    "vis-inventwo" : 3.3.4    , installed 3.3.4
Adapter    "vis-jqui-mfd" : 1.1.1    , installed 1.1.1
Adapter    "vis-map"      : 1.1.0    , installed 1.1.0
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vw-connect"   : 0.6.0    , installed 0.6.0
Adapter    "web"          : 6.2.5    , installed 6.2.5
Adapter    "ws"           : 2.6.1    , installed 2.6.1
Adapter    "zigbee"       : 1.10.3   , installed 1.9.7  [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        43473
States:         40158

*** OS-Repositories and Updates ***
Hit:1 http://de.archive.ubuntu.com/ubuntu jammy InRelease
Hit:2 http://de.archive.ubuntu.com/ubuntu jammy-updates InRelease
Hit:3 http://de.archive.ubuntu.com/ubuntu jammy-backports InRelease
Hit:4 https://packages.grafana.com/oss/deb stable InRelease
Hit:5 http://de.archive.ubuntu.com/ubuntu jammy-security InRelease
Hit:6 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:7 https://repo.zabbix.com/zabbix-agent2-plugins/1/ubuntu jammy InRelease
Hit:8 https://repo.zabbix.com/zabbix/6.0/ubuntu jammy InRelease
Reading package lists...
Pending Updates: 41

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:8093            0.0.0.0:*               LISTEN      1000       41471      3203/io.rest-api.0
tcp        0      0 0.0.0.0:8082            0.0.0.0:*               LISTEN      1000       70583558   1270559/io.web.0
tcp        0      0 0.0.0.0:8087            0.0.0.0:*               LISTEN      1000       39871      2987/io.simple-api.
tcp        0      0 0.0.0.0:6379            0.0.0.0:*               LISTEN      120        25717      764/redis-server 0.
tcp        0      0 0.0.0.0:5002            0.0.0.0:*               LISTEN      0          22160      674/python3
tcp        0      0 127.0.0.53:53           0.0.0.0:*               LISTEN      101        21067      637/systemd-resolve
tcp        0      0 0.0.0.0:20050           0.0.0.0:*               LISTEN      115        26779      809/zabbix_agent2
tcp        0      0 0.0.0.0:3306            0.0.0.0:*               LISTEN      114        25861      974/mariadbd
tcp        0      0 0.0.0.0:3000            0.0.0.0:*               LISTEN      123        25442      1131/grafana
tcp        0      0 0.0.0.0:60008           0.0.0.0:*               LISTEN      1000       70577104   1270566/io.web.1
tcp        0      0 0.0.0.0:60082           0.0.0.0:*               LISTEN      1000       169150016  767300/io.admin.2
tcp        0      0 0.0.0.0:60084           0.0.0.0:*               LISTEN      1000       70583582   1270591/io.socketio
tcp        0      0 0.0.0.0:60086           0.0.0.0:*               LISTEN      1000       54585016   29214/io.ws.0
tcp        0      0 0.0.0.0:1893            0.0.0.0:*               LISTEN      1000       36717      2738/io.fullybrowse
tcp        0      0 0.0.0.0:10051           0.0.0.0:*               LISTEN      115        22425      1166/zabbix_proxy
tcp        0      0 0.0.0.0:10050           0.0.0.0:*               LISTEN      115        26777      809/zabbix_agent2
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      119        22164      848/mosquitto
tcp        0      0 0.0.0.0:9001            0.0.0.0:*               LISTEN      1000       27238      979/iobroker.js-con
tcp        0      0 127.0.0.1:46311         0.0.0.0:*               LISTEN      1000       46054      3703/chrome
tcp        0      0 0.0.0.0:21              0.0.0.0:*               LISTEN      0          25673      844/vsftpd
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          26691      828/sshd: /usr/sbin
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          18778      1/init
tcp        0      0 0.0.0.0:80              0.0.0.0:*               LISTEN      0          25616      773/apache2
udp        0      0 127.0.0.53:53           0.0.0.0:*                           101        21066      637/systemd-resolve
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          18779      1/init
udp        0      0 192.168.1.8:123         0.0.0.0:*                           0          21971      739/ntpd
udp        0      0 127.0.0.1:123           0.0.0.0:*                           0          21969      739/ntpd
udp        0      0 0.0.0.0:123             0.0.0.0:*                           0          21964      739/ntpd
udp        0      0 0.0.0.0:162             0.0.0.0:*                           0          23304      1/init
udp        0      0 0.0.0.0:59218           0.0.0.0:*                           1000       33186      2155/io.snmp.0
udp        0      0 0.0.0.0:46158           0.0.0.0:*                           1000       18364337   1409024/io.broadlin
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1000       84267854   2335172/io.shelly.0
udp        0      0 0.0.0.0:47519           0.0.0.0:*                           1000       172359125  1409024/io.broadlin
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1000       61403213   564757/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1000       61403214   564757/io.tuya.0
udp        0      0 0.0.0.0:15001           0.0.0.0:*                           1000       18364333   1409024/io.broadlin

*** Log File - Last 25 Lines ***

2024-05-19 13:58:00.024  - info: midea.0 (1055385) Scheduled restart.
2024-05-19 13:58:00.028  - info: midea.0 (1055385) cleaned everything up...
2024-05-19 13:58:00.057  - info: midea.0 (1055385) terminating
2024-05-19 13:58:00.059  - info: midea.0 (1055385) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason
2024-05-19 13:58:00.071  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: Laden erlaubt: Solaranlage in Betrieb!
2024-05-19 13:58:00.071  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: Laden erlaubt: SoyoSource hat keine Einspeisung: 0W
2024-05-19 13:58:00.071  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: Laden erlaubt: Ziel SoC noch nicht erreicht
2024-05-19 13:58:00.071  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: Nur Huawei wird gesetzt
2024-05-19 13:58:00.071  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: mqtt.0.Huawei.Huawei_1cea67.MaxPower bis 90%: 2200W (unverändert)
2024-05-19 13:58:00.071  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: mqtt.0.Huawei.Huawei_1c35ac.MaxPower bis 90%: 2200W (unverändert)
2024-05-19 13:58:00.071  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: Huawei 1 Ausgangsleistung aktuell: 0W
2024-05-19 13:58:00.072  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: Huawei 2 Ausgangsleistung aktuell: 0W
2024-05-19 13:58:00.072  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: Pylontech heute geladen Total: 4.37kWh
2024-05-19 13:58:00.072  - info: javascript.1 (3183748) script.js.001_Routinen.Pylontech.LadesteuerungV2: Aktueller Stromverbrauch: 6W
2024-05-19 13:58:00.112  - info: host.iobroker instance system.adapter.daswetter.0 started with pid 1056013
2024-05-19 13:58:00.536  - info: midea.0 (1055385) terminating
2024-05-19 13:58:00.758  - info: host.iobroker instance system.adapter.midea.0 scheduled normal terminated and will be restarted on schedule.
2024-05-19 13:58:00.760  - info: host.iobroker Restart adapter system.adapter.midea.0 because enabled
2024-05-19 13:58:02.334  - info: host.iobroker instance system.adapter.midea.0 started with pid 1056045
2024-05-19 13:58:03.016  - info: daswetter.0 (1056013) starting. Version 3.1.13 in /opt/iobroker/node_modules/iobroker.daswetter, node: v18.20.2, js-controller: 5.0.19
2024-05-19 13:58:05.193  - info: midea.0 (1056045) starting. Version 0.0.7 in /opt/iobroker/node_modules/iobroker.midea, node: v18.20.2, js-controller: 5.0.19
2024-05-19 13:58:05.705  - info: midea.0 (1056045) Login successful
2024-05-19 13:58:22.733  - info: daswetter.0 (1056013) Terminated (ADAPTER_REQUESTED_TERMINATION): All data handled, adapter stopped until next scheduled moment
2024-05-19 13:58:23.245  - info: daswetter.0 (1056013) cleaned everything up...
2024-05-19 13:58:23.264  - info: host.iobroker instance system.adapter.daswetter.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

[tombox]

@bananajoe

debug log der GitHub version an mail
tombox2020@gmail.com

[BananaJoe]

@tombox sagte in Test Adapter eufy Home Robovac:

tombox2020@gmail.com

Mail ist raus, hab vielen Dank!

[BananaJoe]

@tombox so, mit der aktuellen GitHub-Version ist die Log-Meldung wegen dem Device not found for undefinied schon mal weg.

Steuern geht noch nicht.

Der Status scheint der Datenpunkt work_status zu sein

euhome.0.APY2101E10200224.dps.15

Sollte da nicht Text statt einer 6 stehen? Laut App ist er gerade "Vollständig aufgeladen", Hier die Objektdaten:

{
  "type": "state",
  "common": {
    "name": "work_status",
    "role": "text",
    "type": "string",
    "write": true,
    "read": true,
    "states": {
      "6": "6",
      "Running": "RUNNING",
      "standby": "STAND_BY",
      "Sleeping": "SLEEPING",
      "Charging": "CHARGING",
      "completed": "COMPLETED",
      "Recharge": "RECHARGE_NEEDED",
      "cleaning": "CLEANING",
      "goto_charge": "GOING_TO_CHARGE"
    }
  },
  "native": {},
  "from": "system.adapter.euhome.0",
  "user": "system.user.admin",
  "ts": 1716315054035,
  "_id": "euhome.0.APY2101E10200224.dps.15",
  "acl": {
    "object": 1636,
    "state": 1636,
    "owner": "system.user.admin",
    "ownerGroup": "system.group.administrator"
  }
}

6 war "Vollständig geladen" (controlMode 0)
2 ist "Reinigung läuft"
4 ist "Zurück zur Ladestation" (controlMode 3)
5 ist "lädt" (controlMode 0)

Dito bei 5 controlMode

Objektdaten:

{
  "type": "state",
  "common": {
    "name": "controlMode",
    "role": "text",
    "type": "string",
    "write": true,
    "read": true,
    "states": {
      "0": "0",
      "auto": "AUTO",
      "SmallRoom": "SMALL_ROOM",
      "Spot": "SPOT",
      "Edge": "EDGE",
      "Nosweep": "NO_SWEEP",
      "single": "SINGLE",
      "point": "POINT",
      "standby": "STANDBY",
      "wall_follow": "WALL_FOLLOW",
      "smart": "SMART"
    }
  },
  "native": {},
  "from": "system.adapter.euhome.0",
  "user": "system.user.admin",
  "ts": 1716315054021,
  "_id": "euhome.0.APY2101E10200224.dps.5",
  "acl": {
    "object": 1636,
    "state": 1636,
    "owner": "system.user.admin",
    "ownerGroup": "system.group.administrator"
  }
}

Dementsprechend gibt es ein paar Warnungen wegen falscher Typen wenn ich das Gerät starte:

2024-05-21 20:26:16.640  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.5" has to be type "string" but received type "number"
2024-05-21 20:26:16.641  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.15" has to be type "string" but received type "number"
2024-05-21 20:26:16.641  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.102" has to be type "string" but received type "number"
2024-05-21 20:26:16.642  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.104" has to be type "string" but received type "number"
2024-05-21 20:26:16.643  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.106" has to be type "string" but received type "number"
2024-05-21 20:26:16.644  - warn: euhome.0 (2066696) Object of state "euhome.0.APY2101E10200224.dps.107" is missing the required property "common.type"
2024-05-21 20:26:16.644  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.108" has to be type "string" but received type "number"
2024-05-21 20:26:16.644  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.109" has to be type "string" but received type "number"
2024-05-21 20:26:16.645  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.110" has to be type "string" but received type "number"
2024-05-21 20:26:16.645  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.111" has to be type "string" but received type "number"
2024-05-21 20:26:16.645  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.118" has to be type "string" but received type "number"
2024-05-21 20:26:16.684  - warn: euhome.0 (2066696) Object of state "euhome.0.APY2101E10200224.dps.127" is missing the required property "common.type"
2024-05-21 20:26:16.685  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.135" has to be type "string" but received type "number"
2024-05-21 20:26:16.685  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.136" has to be type "string" but received type "number"
2024-05-21 20:26:16.686  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.138" has to be type "string" but received type "number"
2024-05-21 20:26:16.686  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.139" has to be type "string" but received type "number"
2024-05-21 20:26:16.687  - warn: euhome.0 (2066696) Object of state "euhome.0.APY2101E10200224.dps.150" is missing the required property "common.type"
2024-05-21 20:26:16.687  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.153" has to be type "string" but received type "number"
2024-05-21 20:26:16.687  - info: euhome.0 (2066696) State value to set for "euhome.0.APY2101E10200224.dps.154" has to be type "string" but received type "number"
2024-05-21 20:29:34.450  - warn: euhome.0 (2066696) Object of state "euhome.0.APY2101E10200224.dps.151" is missing the required property "common.type"
2024-05-21 20:29:35.164  - warn: euhome.0 (2066696) Object of state "euhome.0.APY2101E10200224.dps.151" is missing the required property "common.type"
2024-05-21 20:29:35.489  - warn: euhome.0 (2066696) Object of state "euhome.0.APY2101E10200224.dps.151" is missing the required property "common.type"
2024-05-21 20:29:35.981  - warn: euhome.0 (2066696) Object of state "euhome.0.APY2101E10200224.dps.151" is missing the required property "common.type"

Steuern kann ich den auch per Alexa-TestCommand / Skill, wenn die Warnungen weg wären, wäre mir schon geholfen (ja, ich das Logging auch auf Error schalten)

[VierlingMt]

@bananajoe lösch mal den ganzen objektbaum 'dps' und starte den adapter neu. Da zieht sich schmodder gern aus vorversionen :)

[BananaJoe]

@vierlingmt das hatte ich bereits gemacht :-( Bevor ich die neue Version des Adapters gestartet hatte, habe ich den ganzen Baum euhome.0.APY2101E10200224 gelöscht

[iorokermcgee]

Hey. I'm getting these errors for my S1 Pro.

The device populates but when I try to change status nothing happens. I see the device is shown as a T2080

Anyone provide any assistance?

[wendy2702]

@iorokermcgee Please post your log as text file using Code Tags </>

[Semmy]

Hallo

Ist es auch irgendwie möglich, dass mir Alexa eine Nachricht sendet, wenn der Roboter hängen bleibt?

Mit freundlichen Grüßen
Semmy

[Herr Zervelatwurst]

Ich habe den Adapter gerade erst entdeckt und installiert ( V0.1.5 ).
Verbindung zu Eufy Clean (Home) besteht.
Wenn ich meinen RoboVac G30 Hybrid per App steuere, werden auch jede Menge Datenpunkte unter dps aktualisiert - z.B. 5 aktualisiert sich beim Reinigungsstart auf Auto.
Setze ich aber einen dieser Datenpunkte, passiert gar nix am Roboter. Im Log sind keine Fehler zu sehen. Er sendet auch Befehle an den Robi - diese kommen dort entweder nicht an oder werden einfach ignoriert. :grin:
Hat noch jemand irgendeine Idee?

[caravandriver]

Gibts einen Trick wie man rausfinden kann, welcher Raum, welche ID hat?