[gelöst] Nach Neuinstallation Fehler im Zigbee Adapter

Klarie

@arteck sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

@klarie wie währe es mit neuer Hardware.

Da habe gestern auch schon dran gedacht und den "SONOFF Zigbee 3.0 USB Plus" mit dem CC2652P ins Auge gefasst.
Hast Du eine Empfehlung für mich?

@winni sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

Vielleicht die SSD separat mit Strom versorgen und evtl. neues, orginal Raspi-Netzteil besorgen. Der Raspberry 4 ist da sehr empfindlich.

An "seinem Platz" hängt er an einem original Netzteil. Im Versuchsaufbau hatte ich ihn an einem 65 W Ladeadapter. Der scheint nicht sonderlich stabil zu sein. Danke für den Hinweis.

Thomas Braun

@klarie

Einen von dieser Liste:

https://www.zigbee2mqtt.io/guide/adapters/

Hier im Forum gibt es aber auch Anbieter, ich glaube @dimaiv hat da was im Angebot.

legro

@klarie sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

Hast Du eine Empfehlung für mich?

Nach langem Suchen hatte ich mich vor Jahren für den CC26X2R1 von TI entschieden und bin damit äußerst zufrieden. Beim Kauf galt es nur Rauchmelder und Außensirene von BITRON zu versorgen. Es war - mangels Repeater - eine gut Reichweite vonnöten, welche dieser Coordinator klaglos bereitstellt. Auch bot er damals schon ZigBee 3.0 und wird wohl noch immer bestens mit Updates versorgt.

Er hat wohl nur einen Nachteil: sein Preis.

Klarie

@arteck sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

@klarie wie währe es mit neuer Hardware..der cc2531 ist urlalt und hat so seine schmakazien ( wie du siehst)

Ich habe einen "SONOFF Zigbee 3.0 USB Plus" (CC2652P ) bestellt. Er kommt in der Woche nach Ostern.
Danach werde ich den Raspi noch mal (mit dem originalen Netzgerät) neu aufsetzen und im Anschluss berichten.

Ich danke Euch für den Support und wünsche schöne Feiertage.

Viele Grüße
Klaus

Klarie

So, da bin ich wieder.
Ich bin am Ende mit meinem Latein...
Raspi und ioBroker habe ich mehrfach mit Backups und dem neuen "SONOFF Zigbee 3.0 USB Plus" (CC2652P ) neu aufgesetzt. Keine Chance..

Jetzt habe ich ein jungfräuliches System mit dem ioBroker in der Minimalausstattung.
Installiert sind lediglich Admin, backitup und Discovery aus der Grundinstallation - und eben der Zigbee-Adapter.
Die verschiedenen Einstellungen habe ich durchprobiert, im Moment ist die lange Link "by-id" hinterlegt.
Trotzdem bleibt der Zigbee-Adapter gelb.

Ich hoffe weiterhin auf Eure Hilfe.

iob diag


======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
 Static hostname: raspi4iobroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.20+rpt-rpi-v8
    Architecture: arm64

Model		: Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : arm64

Systemuptime and Load:
 01:17:53 up 26 min,  2 users,  load average: 0.19, 0.19, 0.18
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2024-04-07 01:17:53 CEST
           Universal time: Sat 2024-04-06 23:17:53 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
klaus
/home/klaus
klaus adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server: 	false
Desktop: 	
Terminal: 	tty
Boot Target: 	multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        580M        2.9G        1.2M        550M        3.4G
Swap:           104M          0B        104M
Total:          4.1G        580M        3.0G

         3791 M total memory
          554 M used memory
          561 M active memory
          349 M inactive memory
         2784 M free memory
           35 M buffer memory
          489 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms


*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  378M   1% /run
/dev/sda2      ext4      117G  2.9G  109G   3% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/sda1      vfat      510M   63M  448M  13% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Apr  7 00:51:11 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:5B:67:30 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=2fd6c37d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Apr  7 00:51:16 2024] EXT4-fs (sda2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[Sun Apr  7 00:51:18 2024] EXT4-fs (sda2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.

Show mounted filesystems \(real ones only\):
TARGET           SOURCE    FSTYPE OPTIONS
/                /dev/sda2 ext4   rw,noatime
`-/boot/firmware /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
513M	/var/
203M	/var/cache
197M	/var/cache/apt
161M	/var/lib
133M	/var/lib/apt/lists

Archived and active journals take up 48.0M in the file system.

/opt/iobroker/backups:
1.5M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
50M	/opt/iobroker/iobroker-data/
22M	/opt/iobroker/iobroker-data/files
19M	/opt/iobroker/iobroker-data/backup-objects
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static

The five largest files in iobroker-data are:
8.7M	/opt/iobroker/iobroker-data/objects.jsonl
6.3M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
2.8M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
1.6M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map
1.5M	/opt/iobroker/iobroker-data/backup-objects/2024-04-06_22-45_objects.jsonl.gz

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0

*** NodeJS-Installation ***

/usr/bin/nodejs 	v18.20.1
/usr/bin/node 		v18.20.1
/usr/bin/npm 		10.5.0
/usr/bin/npx 		10.5.0
/usr/bin/corepack 	0.25.2


nodejs:
  Installed: 18.20.1-1nodesource1
  Candidate: 18.20.1-1nodesource1
  Version table:
 *** 18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller: 	5.0.19
admin: 		6.13.16
javascript: 	"javascript" not found

Adapters from github: 	0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspi4iobroker                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspi4iobroker                           -  enabled
+ system.adapter.discovery.0              : discovery             : raspi4iobroker                           -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspi4iobroker                           -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspi4iobroker                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspi4iobroker                           -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "zigbee"       : 1.10.1   , installed 1.10.1

Objects and States
Please stand by - This may take a while
Objects: 	172
States: 	127

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://archive.raspberrypi.com/debian bookworm InRelease
Hit:3 http://deb.debian.org/debian-security bookworm-security InRelease
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       5645       694/iobroker.js-con 
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       5652       694/iobroker.js-con 
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          7266       715/sshd: /usr/sbin 
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       589        803/io.admin.0      
tcp6       0      0 :::22                   :::*                    LISTEN      0          7277       715/sshd: /usr/sbin 
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        6263       562/avahi-daemon: r 
udp        0      0 0.0.0.0:54755           0.0.0.0:*                           104        6265       562/avahi-daemon: r 
udp6       0      0 :::45488                :::*                                104        6266       562/avahi-daemon: r 
udp6       0      0 fe80::a2e3:3846:8ea:546 :::*                                0          6490       621/NetworkManager  
udp6       0      0 :::5353                 :::*                                104        6264       562/avahi-daemon: r 

*** Log File - Last 25 Lines ***

2024-04-07 00:59:30.977  - info: admin.0 (803) <== Disconnect system.user.admin from ::ffff:192.168.178.24 
2024-04-07 00:59:30.868  - info: zigbee.0 (939) cleaned everything up...
2024-04-07 00:59:30.871  - info: zigbee.0 (939) Zigbee: disabling joining new devices.
2024-04-07 00:59:31.080  - warn: zigbee.0 (939) Failed to stop zigbee during startup
2024-04-07 00:59:31.081  - info: zigbee.0 (939) terminating
2024-04-07 00:59:31.083  - info: zigbee.0 (939) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-04-07 00:59:31.370  - info: zigbee.0 (939) terminating
2024-04-07 00:59:31.636  - info: host.raspi4iobroker instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-04-07 00:59:33.944  - info: host.raspi4iobroker instance system.adapter.zigbee.0 started with pid 2034
2024-04-07 00:59:38.545  - info: zigbee.0 (2034) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.20.1, js-controller: 5.0.19
2024-04-07 00:59:38.653  - info: zigbee.0 (2034) delete old Backup files. keep only last 10
2024-04-07 00:59:38.655  - info: zigbee.0 (2034) Starting Zigbee  npm ...
2024-04-07 00:59:38.975  - info: zigbee.0 (2034) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 01:00:45.408  - error: zigbee.0 (2034) Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby"
2024-04-07 01:00:45.410  - error: zigbee.0 (2034) Failed to start Zigbee
2024-04-07 01:00:45.411  - error: zigbee.0 (2034) Error herdsman start
2024-04-07 01:00:55.416  - info: zigbee.0 (2034) Try to reconnect. 1 attempts left
2024-04-07 01:00:55.419  - info: zigbee.0 (2034) Starting Zigbee  npm ...
2024-04-07 01:00:55.447  - info: zigbee.0 (2034) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 01:02:00.838  - error: zigbee.0 (2034) Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby"
2024-04-07 01:02:00.841  - error: zigbee.0 (2034) Failed to start Zigbee
2024-04-07 01:02:00.843  - error: zigbee.0 (2034) Error herdsman start
2024-04-07 01:15:06.095  - info: admin.0 (803) ==> Connected system.user.admin from ::ffff:192.168.178.24
2024-04-07 01:15:06.211  - error: zigbee.0 (2034) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2024-04-07 01:15:06.353  - info: zigbee.0 (2034) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"ITead","serialNumber":"f8e52e2daaa4ed11aa9081582981d5c7","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0","vendorId":"10c4","productId":"ea60"}]

============ Mark until here for C&P =============

iob diag has finished.

Summary

======================= SUMMARY =======================
			v.2023-10-10


 Static hostname: raspi4iobroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.20+rpt-rpi-v8
    Architecture: arm64

Installation: 		native
Kernel: 		aarch64
Userland: 		arm64
Timezone: 		Europe/Berlin (CEST, +0200)
User-ID: 		1000
X-Server: 		false
Boot Target: 		multi-user.target

Pending OS-Updates: 	0
Pending iob updates: 	0

Nodejs-Installation: 	/usr/bin/nodejs 	v18.20.1
			/usr/bin/node 		v18.20.1
			/usr/bin/npm 		10.5.0
			/usr/bin/npx 		10.5.0
			/usr/bin/corepack 	0.25.2

Recommended versions are nodejs 18.20.1 and npm 10.5.0
Your nodejs installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            4.0G        588M        2.9G        1.2M        551M        3.4G
Swap:           104M          0B        104M
Total:          4.1G        588M        3.0G

Active iob-Instances: 	5
Active repo(s): stable

ioBroker Core: 		js-controller 		5.0.19
			admin 			6.13.16

ioBroker Status: 	iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspi4iobroker                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

Objects: 		172
States: 		127

Size of iob-Database:

8.7M	/opt/iobroker/iobroker-data/objects.jsonl
312K	/opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

"iob logs --watch" sagt nach dem Neustart des Zigbee-Adapters

2024-04-07 01:15:06.353  - info: zigbee.0 (2034) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"ITead","serialNumber":"f8e52e2daaa4ed11aa9081582981d5c7","pnpId":"usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0","vendorId":"10c4","productId":"ea60"}]
2024-04-07 01:32:59.945  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 (force=false, process=true)
2024-04-07 01:32:59.959  - info: zigbee.0 (2034) Got terminate signal TERMINATE_YOURSELF
2024-04-07 01:32:59.962  - info: zigbee.0 (2034) cleaned everything up...
2024-04-07 01:32:59.968  - info: zigbee.0 (2034) Zigbee: disabling joining new devices.
2024-04-07 01:33:00.002  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 send kill signal
2024-04-07 01:33:00.464  - info: zigbee.0 (2034) terminating
2024-04-07 01:33:00.466  - info: zigbee.0 (2034) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-04-07 01:33:01.006  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 killing pid 2034
2024-04-07 01:33:01.026  - info: host.raspi4iobroker instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-04-07 01:32:59.945  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 (force=false, process=true)
2024-04-07 01:32:59.959  - info: zigbee.0 (2034) Got terminate signal TERMINATE_YOURSELF
2024-04-07 01:32:59.962  - info: zigbee.0 (2034) cleaned everything up...
2024-04-07 01:32:59.968  - info: zigbee.0 (2034) Zigbee: disabling joining new devices.
2024-04-07 01:33:00.002  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 send kill signal
2024-04-07 01:33:00.464  - info: zigbee.0 (2034) terminating
2024-04-07 01:33:00.466  - info: zigbee.0 (2034) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-04-07 01:33:01.006  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 killing pid 2034
2024-04-07 01:33:01.026  - info: host.raspi4iobroker instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-04-07 01:33:03.039  - info: host.raspi4iobroker instance system.adapter.zigbee.0 started with pid 3505
2024-04-07 01:33:03.039  - info: host.raspi4iobroker instance system.adapter.zigbee.0 started with pid 3505
2024-04-07 01:33:07.600  - info: zigbee.0 (3505) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.20.1, js-controller: 5.0.19
2024-04-07 01:33:07.710  - info: zigbee.0 (3505) delete old Backup files. keep only last 10
2024-04-07 01:33:07.712  - info: zigbee.0 (3505) Starting Zigbee  npm ...
2024-04-07 01:33:08.032  - info: zigbee.0 (3505) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 01:33:07.600  - info: zigbee.0 (3505) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.20.1, js-controller: 5.0.19
2024-04-07 01:33:07.710  - info: zigbee.0 (3505) delete old Backup files. keep only last 10
2024-04-07 01:33:07.712  - info: zigbee.0 (3505) Starting Zigbee  npm ...
2024-04-07 01:33:08.032  - info: zigbee.0 (3505) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 01:34:14.181  - error: zigbee.0 (3505) Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby"
2024-04-07 01:34:14.183  - error: zigbee.0 (3505) Failed to start Zigbee
2024-04-07 01:34:14.185  - error: zigbee.0 (3505) Error herdsman start
2024-04-07 01:34:14.181  - error: zigbee.0 (3505) Starting zigbee-herdsman problem : "network commissioning timed out - most likely network with the same panId or extendedPanId already exists nearby"
2024-04-07 01:34:14.183  - error: zigbee.0 (3505) Failed to start Zigbee
2024-04-07 01:34:14.185  - error: zigbee.0 (3505) Error herdsman start
2024-04-07 01:34:24.191  - info: zigbee.0 (3505) Try to reconnect. 1 attempts left
2024-04-07 01:34:24.194  - info: zigbee.0 (3505) Starting Zigbee  npm ...
2024-04-07 01:34:24.224  - info: zigbee.0 (3505) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 01:34:24.491  - error: zigbee.0 (3505) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2024-04-07 01:34:24.492  - error: zigbee.0 (3505) Failed to start Zigbee
2024-04-07 01:34:24.493  - error: zigbee.0 (3505) Error herdsman start
2024-04-07 01:34:24.191  - info: zigbee.0 (3505) Try to reconnect. 1 attempts left
2024-04-07 01:34:24.194  - info: zigbee.0 (3505) Starting Zigbee  npm ...
2024-04-07 01:34:24.224  - info: zigbee.0 (3505) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 01:34:24.491  - error: zigbee.0 (3505) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error Resource temporarily unavailable Cannot lock port'"
2024-04-07 01:34:24.492  - error: zigbee.0 (3505) Failed to start Zigbee
2024-04-07 01:34:24.493  - error: zigbee.0 (3505) Error herdsman start

[edit]
Ist die Zeile 30/33 ein nachvollziehbares Szenario?
Bis letzte Woche lief es über den alten Stick mit der gleichen panID problemlos...
[/edit]*

LG KLaus

Asgothian

[edit]
Ist die Zeile 30/33 ein nachvollziehbares Szenario?
Bis letzte Woche lief es über den alten Stick mit der gleichen panID problemlos...
[/edit]*

LG KLaus

Ist es. Der Stick beschwert sich das es ein aktives Netzwerk gibt welches die PanID nutzt mit der er ein neues aufmachen soll.
Es gibt 2 mögliche Lösungen:

Andere PanID / Ext-PanID eintragen und alles neu anlernen
zigbee Adapter starten nachdem alle Router devices vom Strom getrennt wurden.

A.

arteck

@asgothian oder Antenne ab und in AluFolie einpacken..das geht auch..und wieder starten

Klarie

@asgothian sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

zigbee Adapter starten nachdem alle Router devices vom Strom getrennt wurden.

Die ganzen Router, die natürlich noch aktiv sind, hatte ich gar nicht auf dem Schirm. Danke für den Hinweis!

@arteck sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

@asgothian oder Antenne ab und in AluFolie einpacken..das geht auch..und wieder starten

Das werde ich heute Abend probieren!

Klarie

Udate

Der Tipp von @arteck hat leider nicht funktioniert.
Trotz einer "halben Rolle" Alufolie entdeckte der Coordinator immer noch die gleiche PanID in der Nähe.
Ich habe vermutlich zu viele und "starke!" Router im Netz...
Also habe ich im ganzen Haus den Strom abgestellt und den Raspi über eine leistungsstarke Powerbank gestartet.
Der Zigbee-Adapter bleibt weiterhin gelb (kann nicht mit Gerät oder Dienst verbinden).

Logfile des Startvorganges

2024-04-07 14:21:52.062  - info: backitup.0 (860) cleaned everything up...
2024-04-07 14:21:52.066  - info: zigbee.0 (884) cleaned everything up...
2024-04-07 14:21:52.066  - info: host.raspi4iobroker received SIGTERM
2024-04-07 14:21:52.067  - info: admin.0 (763) terminating http server on port 8081
2024-04-07 14:21:52.080  - info: host.raspi4iobroker stopInstance system.adapter.admin.0 (force=false, process=true)
2024-04-07 14:21:52.081  - info: host.raspi4iobroker stopInstance system.adapter.backitup.0 (force=false, process=true)
2024-04-07 14:21:52.082  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 (force=false, process=true)
2024-04-07 14:21:52.083  - info: host.raspi4iobroker stopInstance system.adapter.discovery.0 (force=false, process=true)
2024-04-07 14:21:52.133  - info: discovery.0 (895) Got terminate signal TERMINATE_YOURSELF
2024-04-07 14:21:52.129  - info: admin.0 (763) Got terminate signal TERMINATE_YOURSELF
2024-04-07 14:21:52.139  - info: host.raspi4iobroker stopInstance system.adapter.admin.0 send kill signal
2024-04-07 14:21:52.135  - info: discovery.0 (895) terminating
2024-04-07 14:21:52.139  - info: discovery.0 (895) Terminated (NO_ERROR): Without reason
2024-04-07 14:21:52.141  - info: host.raspi4iobroker stopInstance system.adapter.backitup.0 send kill signal
2024-04-07 14:21:52.142  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 send kill signal
2024-04-07 14:21:52.142  - info: host.raspi4iobroker stopInstance system.adapter.discovery.0 send kill signal
2024-04-07 14:21:52.130  - info: backitup.0 (860) Got terminate signal TERMINATE_YOURSELF
2024-04-07 14:21:52.145  - info: backitup.0 (860) terminating
2024-04-07 14:21:52.148  - info: admin.0 (763) terminating
2024-04-07 14:21:52.147  - info: backitup.0 (860) Terminated (NO_ERROR): Without reason
2024-04-07 14:21:52.154  - info: admin.0 (763) Terminated (NO_ERROR): Without reason
2024-04-07 14:21:52.087  - info: zigbee.0 (884) Zigbee: disabling joining new devices.
2024-04-07 14:21:52.180  - warn: zigbee.0 (884) Failed to stop zigbee during startup
2024-04-07 14:21:52.203  - info: zigbee.0 (884) Got terminate signal TERMINATE_YOURSELF
2024-04-07 14:21:52.248  - info: zigbee.0 (884) terminating
2024-04-07 14:21:52.250  - info: zigbee.0 (884) Terminated (NO_ERROR): Without reason
2024-04-07 14:21:52.565  - info: discovery.0 (895) terminating
2024-04-07 14:21:52.570  - info: backitup.0 (860) terminating
2024-04-07 14:21:52.578  - info: zigbee.0 (884) terminating
2024-04-07 14:21:52.599  - info: admin.0 (763) terminating
2024-04-07 14:21:52.756  - info: host.raspi4iobroker instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR)
2024-04-07 14:21:52.756  - info: host.raspi4iobroker instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR)
2024-04-07 14:21:52.801  - info: host.raspi4iobroker instance system.adapter.admin.0 terminated with code 0 (NO_ERROR)
2024-04-07 14:21:52.817  - info: host.raspi4iobroker instance system.adapter.zigbee.0 terminated with code 0 (NO_ERROR)
2024-04-07 14:21:52.818  - info: host.raspi4iobroker All instances are stopped.
2024-04-07 14:21:52.950  - info: host.raspi4iobroker terminated
2024-04-07 14:22:02.703  - info: host.raspi4iobroker iobroker.js-controller version 5.0.19 js-controller starting
2024-04-07 14:22:02.710  - info: host.raspi4iobroker Copyright (c) 2014-2023 bluefox, 2014 hobbyquaker
2024-04-07 14:22:02.711  - info: host.raspi4iobroker hostname: raspi4iobroker, node: v18.20.1
2024-04-07 14:22:02.712  - info: host.raspi4iobroker ip addresses: 
2024-04-07 14:22:04.614  - info: host.raspi4iobroker connected to Objects and States
2024-04-07 14:22:04.683  - info: host.raspi4iobroker added notifications configuration of host
2024-04-07 14:22:05.836  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.nodeCurrent"
2024-04-07 14:22:05.841  - info: host.raspi4iobroker 4 instances found
2024-04-07 14:22:05.877  - info: host.raspi4iobroker starting 4 instances
2024-04-07 14:22:05.978  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.nodeNewest"
2024-04-07 14:22:06.008  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.nodeNewestNext"
2024-04-07 14:22:06.034  - info: host.raspi4iobroker instance system.adapter.admin.0 started with pid 800
2024-04-07 14:22:06.052  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.npmCurrent"
2024-04-07 14:22:06.112  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.npmNewest"
2024-04-07 14:22:06.127  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.npmNewestNext"
2024-04-07 14:22:06.141  - info: host.raspi4iobroker Some obsolete host states deleted.
2024-04-07 14:22:09.937  - info: host.raspi4iobroker instance system.adapter.backitup.0 started with pid 810
2024-04-07 14:22:12.188  - info: admin.0 (800) starting. Version 6.13.16 in /opt/iobroker/node_modules/iobroker.admin, node: v18.20.1, js-controller: 5.0.19
2024-04-07 14:22:12.293  - info: admin.0 (800) requesting all objects
2024-04-07 14:22:13.183  - warn: admin.0 (800) Cannot check node.js versions: Error: getaddrinfo EAI_AGAIN nodejs.org
2024-04-07 14:22:14.038  - info: host.raspi4iobroker instance system.adapter.zigbee.0 started with pid 829
2024-04-07 14:22:14.463  - info: admin.0 (800) received all objects
2024-04-07 14:22:15.278  - warn: admin.0 (800) Cannot update news: getaddrinfo EAI_AGAIN iobroker.live
2024-04-07 14:22:15.291  - info: admin.0 (800) Request actual repository...
2024-04-07 14:22:15.369  - info: admin.0 (800) socket.io server listening on port 8081
2024-04-07 14:22:15.381  - info: admin.0 (800) http server listening on port 8081
2024-04-07 14:22:15.384  - info: admin.0 (800) Use link "http://127.0.0.1:8081" to configure.
2024-04-07 14:22:16.527  - warn: admin.0 (800) Cannot update rating: getaddrinfo EAI_AGAIN rating.iobroker.net
2024-04-07 14:22:17.248  - info: host.raspi4iobroker Updating repository "stable" under "http://download.iobroker.net/sources-dist.json"
2024-04-07 14:22:17.633  - error: host.raspi4iobroker Error by updating repository "stable" under "http://download.iobroker.net/sources-dist.json": Cannot download repository file from "http://download.iobroker.net/sources-dist.json": getaddrinfo EAI_AGAIN download.iobroker.net
2024-04-07 14:22:19.141  - info: host.raspi4iobroker instance system.adapter.discovery.0 started with pid 836
2024-04-07 14:22:19.533  - info: admin.0 (800) Repository received successfully.
2024-04-07 14:22:19.699  - info: backitup.0 (810) starting. Version 2.10.11 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.20.1, js-controller: 5.0.19
2024-04-07 14:22:19.923  - info: backitup.0 (810) [iobroker] backup will be activated at 02:48 every 1 day(s)
2024-04-07 14:22:23.509  - info: discovery.0 (836) starting. Version 4.4.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v18.20.1, js-controller: 5.0.19
2024-04-07 14:22:24.766  - info: zigbee.0 (829) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.20.1, js-controller: 5.0.19
2024-04-07 14:22:24.996  - info: zigbee.0 (829) delete old Backup files. keep only last 10
2024-04-07 14:22:25.001  - info: zigbee.0 (829) Starting Zigbee  npm ...
2024-04-07 14:22:25.824  - error: zigbee.0 (829) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0'"
2024-04-07 14:22:25.826  - error: zigbee.0 (829) Failed to start Zigbee
2024-04-07 14:22:25.827  - error: zigbee.0 (829) Error herdsman start
2024-04-07 14:22:25.835  - info: zigbee.0 (829) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 14:22:35.835  - info: zigbee.0 (829) Try to reconnect. 1 attempts left
2024-04-07 14:22:35.837  - info: zigbee.0 (829) Starting Zigbee  npm ...
2024-04-07 14:22:35.862  - error: zigbee.0 (829) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0'"
2024-04-07 14:22:35.864  - error: zigbee.0 (829) Failed to start Zigbee
2024-04-07 14:22:35.866  - error: zigbee.0 (829) Error herdsman start
2024-04-07 14:22:35.893  - info: zigbee.0 (829) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 14:26:05.943  - info: host.raspi4iobroker No IPv4 address found after 5 minutes.
2024-04-07 14:26:05.945  - info: host.raspi4iobroker No IPv4 address found after 5 minutes.
2024-04-07 14:26:05.946  - info: host.raspi4iobroker No IPv4 address found after 5 minutes.
2024-04-07 14:26:05.947  - info: host.raspi4iobroker No IPv4 address found after 5 minutes.
2024-04-07 14:35:28.526  - info: admin.0 (800) failed connection to socket.io from ::ffff:192.168.178.24: Passport was not initialized
2024-04-07 14:35:40.236  - info: admin.0 (800) ==> Connected system.user.admin from ::ffff:192.168.178.24

Asgothian

@klarie sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

Udate

Der Tipp von @arteck hat leider nicht funktioniert.
Trotz einer "halben Rolle" Alufolie entdeckte der Coordinator immer noch die gleiche PanID in der Nähe.
Ich habe vermutlich zu viele und "starke!" Router im Netz...
Also habe ich im ganzen Haus den Strom abgestellt und den Raspi über eine leistungsstarke Powerbank gestartet.
Der Zigbee-Adapter bleibt weiterhin gelb (kann nicht mit Gerät oder Dienst verbinden).

Logfile des Startvorganges

2024-04-07 14:21:52.062  - info: backitup.0 (860) cleaned everything up...
2024-04-07 14:21:52.066  - info: zigbee.0 (884) cleaned everything up...
2024-04-07 14:21:52.066  - info: host.raspi4iobroker received SIGTERM
2024-04-07 14:21:52.067  - info: admin.0 (763) terminating http server on port 8081
2024-04-07 14:21:52.080  - info: host.raspi4iobroker stopInstance system.adapter.admin.0 (force=false, process=true)
2024-04-07 14:21:52.081  - info: host.raspi4iobroker stopInstance system.adapter.backitup.0 (force=false, process=true)
2024-04-07 14:21:52.082  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 (force=false, process=true)
2024-04-07 14:21:52.083  - info: host.raspi4iobroker stopInstance system.adapter.discovery.0 (force=false, process=true)
2024-04-07 14:21:52.133  - info: discovery.0 (895) Got terminate signal TERMINATE_YOURSELF
2024-04-07 14:21:52.129  - info: admin.0 (763) Got terminate signal TERMINATE_YOURSELF
2024-04-07 14:21:52.139  - info: host.raspi4iobroker stopInstance system.adapter.admin.0 send kill signal
2024-04-07 14:21:52.135  - info: discovery.0 (895) terminating
2024-04-07 14:21:52.139  - info: discovery.0 (895) Terminated (NO_ERROR): Without reason
2024-04-07 14:21:52.141  - info: host.raspi4iobroker stopInstance system.adapter.backitup.0 send kill signal
2024-04-07 14:21:52.142  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 send kill signal
2024-04-07 14:21:52.142  - info: host.raspi4iobroker stopInstance system.adapter.discovery.0 send kill signal
2024-04-07 14:21:52.130  - info: backitup.0 (860) Got terminate signal TERMINATE_YOURSELF
2024-04-07 14:21:52.145  - info: backitup.0 (860) terminating
2024-04-07 14:21:52.148  - info: admin.0 (763) terminating
2024-04-07 14:21:52.147  - info: backitup.0 (860) Terminated (NO_ERROR): Without reason
2024-04-07 14:21:52.154  - info: admin.0 (763) Terminated (NO_ERROR): Without reason
2024-04-07 14:21:52.087  - info: zigbee.0 (884) Zigbee: disabling joining new devices.
2024-04-07 14:21:52.180  - warn: zigbee.0 (884) Failed to stop zigbee during startup
2024-04-07 14:21:52.203  - info: zigbee.0 (884) Got terminate signal TERMINATE_YOURSELF
2024-04-07 14:21:52.248  - info: zigbee.0 (884) terminating
2024-04-07 14:21:52.250  - info: zigbee.0 (884) Terminated (NO_ERROR): Without reason
2024-04-07 14:21:52.565  - info: discovery.0 (895) terminating
2024-04-07 14:21:52.570  - info: backitup.0 (860) terminating
2024-04-07 14:21:52.578  - info: zigbee.0 (884) terminating
2024-04-07 14:21:52.599  - info: admin.0 (763) terminating
2024-04-07 14:21:52.756  - info: host.raspi4iobroker instance system.adapter.discovery.0 terminated with code 0 (NO_ERROR)
2024-04-07 14:21:52.756  - info: host.raspi4iobroker instance system.adapter.backitup.0 terminated with code 0 (NO_ERROR)
2024-04-07 14:21:52.801  - info: host.raspi4iobroker instance system.adapter.admin.0 terminated with code 0 (NO_ERROR)
2024-04-07 14:21:52.817  - info: host.raspi4iobroker instance system.adapter.zigbee.0 terminated with code 0 (NO_ERROR)
2024-04-07 14:21:52.818  - info: host.raspi4iobroker All instances are stopped.
2024-04-07 14:21:52.950  - info: host.raspi4iobroker terminated
2024-04-07 14:22:02.703  - info: host.raspi4iobroker iobroker.js-controller version 5.0.19 js-controller starting
2024-04-07 14:22:02.710  - info: host.raspi4iobroker Copyright (c) 2014-2023 bluefox, 2014 hobbyquaker
2024-04-07 14:22:02.711  - info: host.raspi4iobroker hostname: raspi4iobroker, node: v18.20.1
2024-04-07 14:22:02.712  - info: host.raspi4iobroker ip addresses: 
2024-04-07 14:22:04.614  - info: host.raspi4iobroker connected to Objects and States
2024-04-07 14:22:04.683  - info: host.raspi4iobroker added notifications configuration of host
2024-04-07 14:22:05.836  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.nodeCurrent"
2024-04-07 14:22:05.841  - info: host.raspi4iobroker 4 instances found
2024-04-07 14:22:05.877  - info: host.raspi4iobroker starting 4 instances
2024-04-07 14:22:05.978  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.nodeNewest"
2024-04-07 14:22:06.008  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.nodeNewestNext"
2024-04-07 14:22:06.034  - info: host.raspi4iobroker instance system.adapter.admin.0 started with pid 800
2024-04-07 14:22:06.052  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.npmCurrent"
2024-04-07 14:22:06.112  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.npmNewest"
2024-04-07 14:22:06.127  - info: host.raspi4iobroker Delete state "system.host.raspi4iobroker.versions.npmNewestNext"
2024-04-07 14:22:06.141  - info: host.raspi4iobroker Some obsolete host states deleted.
2024-04-07 14:22:09.937  - info: host.raspi4iobroker instance system.adapter.backitup.0 started with pid 810
2024-04-07 14:22:12.188  - info: admin.0 (800) starting. Version 6.13.16 in /opt/iobroker/node_modules/iobroker.admin, node: v18.20.1, js-controller: 5.0.19
2024-04-07 14:22:12.293  - info: admin.0 (800) requesting all objects
2024-04-07 14:22:13.183  - warn: admin.0 (800) Cannot check node.js versions: Error: getaddrinfo EAI_AGAIN nodejs.org
2024-04-07 14:22:14.038  - info: host.raspi4iobroker instance system.adapter.zigbee.0 started with pid 829
2024-04-07 14:22:14.463  - info: admin.0 (800) received all objects
2024-04-07 14:22:15.278  - warn: admin.0 (800) Cannot update news: getaddrinfo EAI_AGAIN iobroker.live
2024-04-07 14:22:15.291  - info: admin.0 (800) Request actual repository...
2024-04-07 14:22:15.369  - info: admin.0 (800) socket.io server listening on port 8081
2024-04-07 14:22:15.381  - info: admin.0 (800) http server listening on port 8081
2024-04-07 14:22:15.384  - info: admin.0 (800) Use link "http://127.0.0.1:8081" to configure.
2024-04-07 14:22:16.527  - warn: admin.0 (800) Cannot update rating: getaddrinfo EAI_AGAIN rating.iobroker.net
2024-04-07 14:22:17.248  - info: host.raspi4iobroker Updating repository "stable" under "http://download.iobroker.net/sources-dist.json"
2024-04-07 14:22:17.633  - error: host.raspi4iobroker Error by updating repository "stable" under "http://download.iobroker.net/sources-dist.json": Cannot download repository file from "http://download.iobroker.net/sources-dist.json": getaddrinfo EAI_AGAIN download.iobroker.net
2024-04-07 14:22:19.141  - info: host.raspi4iobroker instance system.adapter.discovery.0 started with pid 836
2024-04-07 14:22:19.533  - info: admin.0 (800) Repository received successfully.
2024-04-07 14:22:19.699  - info: backitup.0 (810) starting. Version 2.10.11 in /opt/iobroker/node_modules/iobroker.backitup, node: v18.20.1, js-controller: 5.0.19
2024-04-07 14:22:19.923  - info: backitup.0 (810) [iobroker] backup will be activated at 02:48 every 1 day(s)
2024-04-07 14:22:23.509  - info: discovery.0 (836) starting. Version 4.4.0 in /opt/iobroker/node_modules/iobroker.discovery, node: v18.20.1, js-controller: 5.0.19
2024-04-07 14:22:24.766  - info: zigbee.0 (829) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.20.1, js-controller: 5.0.19
2024-04-07 14:22:24.996  - info: zigbee.0 (829) delete old Backup files. keep only last 10
2024-04-07 14:22:25.001  - info: zigbee.0 (829) Starting Zigbee  npm ...
2024-04-07 14:22:25.824  - error: zigbee.0 (829) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0'"
2024-04-07 14:22:25.826  - error: zigbee.0 (829) Failed to start Zigbee
2024-04-07 14:22:25.827  - error: zigbee.0 (829) Error herdsman start
2024-04-07 14:22:25.835  - info: zigbee.0 (829) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 14:22:35.835  - info: zigbee.0 (829) Try to reconnect. 1 attempts left
2024-04-07 14:22:35.837  - info: zigbee.0 (829) Starting Zigbee  npm ...
2024-04-07 14:22:35.862  - error: zigbee.0 (829) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0'"
2024-04-07 14:22:35.864  - error: zigbee.0 (829) Failed to start Zigbee
2024-04-07 14:22:35.866  - error: zigbee.0 (829) Error herdsman start
2024-04-07 14:22:35.893  - info: zigbee.0 (829) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 14:26:05.943  - info: host.raspi4iobroker No IPv4 address found after 5 minutes.
2024-04-07 14:26:05.945  - info: host.raspi4iobroker No IPv4 address found after 5 minutes.
2024-04-07 14:26:05.946  - info: host.raspi4iobroker No IPv4 address found after 5 minutes.
2024-04-07 14:26:05.947  - info: host.raspi4iobroker No IPv4 address found after 5 minutes.
2024-04-07 14:35:28.526  - info: admin.0 (800) failed connection to socket.io from ::ffff:192.168.178.24: Passport was not initialized
2024-04-07 14:35:40.236  - info: admin.0 (800) ==> Connected system.user.admin from ::ffff:192.168.178.24

Der usb Stick wird nicht erkannt - siehe Zeilen 75 und 81 im log.

A.

Thomas Braun

@klarie sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

cannot open /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0'"

Kopier den Link von hier:

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0

Klarie

@thomas-braun sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

Kopier den Link von hier:

Der Link ist bereits in den Einstellungen hinterlegt.

@klarie sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

Die verschiedenen Einstellungen habe ich durchprobiert, im Moment ist die lange Link "by-id" hinterlegt.

Bildschirmfoto vom 2024-04-07 19-41-19.png

Thomas Braun

@klarie

Auch keine Zahlendreher drin?

Wildbill

@klarie Beim Kopieren vielleicht versehentlich vorne order hinten ein Leerzeichen angehängt?
Einfach mal vorne das erste Zeichen löschen und nochmal neu manuell eingeben. Hinten das Gleiche.

Gruss, Jürgen

Klarie

@asgothian sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0'"

(Zeile 75 aus meinem Logfile)

@thomas-braun sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

Kopier den Link von hier:

USB-Devices by-id:                                                                                                                                                                            USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':                                                                                                                                                                                                                                                                                                                                                         /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0

Die Links sind identisch. Habt ihr eine Idee, warum der Stick, bzw. der Treiber dazu dann nicht gefunden wird?

Thomas Braun

@klarie

Nein. Aber ich habe just gerade genau dazu im iob diag neuen Code drin.
Du kannst ja mal die Beta-Version von hier laufen lassen:

https://forum.iobroker.net/topic/59549/iob-diag-skript

Klarie

@thomas-braun sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

Nein. Aber ich habe just gerade genau dazu im iob diag neuen Code drin.
Du kannst ja mal die Beta-Version von hier laufen lassen:
https://forum.iobroker.net/topic/59549/iob-diag-skript

Ausgabe des Logs:

Skript v.2024-04-07

*** BASE SYSTEM ***
 Static hostname: raspi4iobroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.20+rpt-rpi-v8
    Architecture: arm64

Model		: Raspberry Pi 4 Model B Rev 1.1
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 20:18:08 up  5:25,  1 user,  load average: 0.46, 0.26, 0.15
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Sun 2024-04-07 20:18:08 CEST
           Universal time: Sun 2024-04-07 18:18:08 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
klaus
HOME=/home/klaus
GROUPS=klaus adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
GROUPS=iobroker tty dialout audio video bluetooth gpio i2c

*** Display-Server-Setup ***
pgrep: pattern that searches for process name longer than 15 characters will result in zero matches
Try `pgrep -f' option to match against the complete command line.
Display-Server: false
Desktop: 	
Terminal: 	tty
Boot Target: 	multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            4.0G        553M        3.1G        1.2M        356M        3.4G
Swap:           104M          0B        104M
Total:          4.1G        553M        3.2G

Active iob-Instances: 	5

         3791 M total memory
          526 M used memory
          588 M active memory
          124 M inactive memory
         2991 M free memory
           57 M buffer memory
          283 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

*** top - Table Of Processes  ***
top - 20:18:11 up  5:25,  1 user,  load average: 0.46, 0.26, 0.15
Tasks: 162 total,   1 running, 161 sleeping,   0 stopped,   0 zombie
%Cpu(s):  0.0 us, 20.0 sy,  0.0 ni, 80.0 id,  0.0 wa,  0.0 hi,  0.0 si,  0.0 st 
MiB Mem :   3791.1 total,   2989.9 free,    528.0 used,    340.6 buff/cache     
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   3263.0 avail Mem 

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION
0 loaded units listed.

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  1.6G     0  1.6G   0% /dev
tmpfs          tmpfs     380M  1.2M  378M   1% /run
/dev/sda2      ext4      117G  2.9G  109G   3% /
tmpfs          tmpfs     1.9G     0  1.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
/dev/sda1      vfat      510M   63M  448M  13% /boot/firmware
tmpfs          tmpfs     380M     0  380M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun Apr  7 14:52:21 2024] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:5B:67:30 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=2fd6c37d-02 rootfstype=ext4 fsck.repair=yes rootwait
[Sun Apr  7 14:52:27 2024] EXT4-fs (sda2): mounted filesystem 93c89e92-8f2e-4522-ad32-68faed883d2f ro with ordered data mode. Quota mode: none.
[Sun Apr  7 14:52:28 2024] EXT4-fs (sda2): re-mounted 93c89e92-8f2e-4522-ad32-68faed883d2f r/w. Quota mode: none.

Show mounted filesystems:
TARGET                                                  SOURCE      FSTYPE      OPTIONS
/                                                       /dev/sda2   ext4        rw,noatime
|-/sys                                                  sysfs       sysfs       rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/security                                securityfs  securityfs  rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/cgroup                                      cgroup2     cgroup2     rw,nosuid,nodev,noexec,relatime,nsdelegate,memory_recursiveprot
| |-/sys/fs/pstore                                      pstore      pstore      rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/bpf                                         bpf         bpf         rw,nosuid,nodev,noexec,relatime,mode=700
| |-/sys/kernel/debug                                   debugfs     debugfs     rw,nosuid,nodev,noexec,relatime
| |-/sys/kernel/tracing                                 tracefs     tracefs     rw,nosuid,nodev,noexec,relatime
| |-/sys/fs/fuse/connections                            fusectl     fusectl     rw,nosuid,nodev,noexec,relatime
| `-/sys/kernel/config                                  configfs    configfs    rw,nosuid,nodev,noexec,relatime
|-/proc                                                 proc        proc        rw,relatime
| `-/proc/sys/fs/binfmt_misc                            systemd-1   autofs      rw,relatime,fd=30,pgrp=1,timeout=0,minproto=5,maxproto=5,direct,pipe_ino=352
|   `-/proc/sys/fs/binfmt_misc                          binfmt_misc binfmt_misc rw,nosuid,nodev,noexec,relatime
|-/dev                                                  udev        devtmpfs    rw,nosuid,relatime,size=1671028k,nr_inodes=417757,mode=755
| |-/dev/pts                                            devpts      devpts      rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
| |-/dev/shm                                            tmpfs       tmpfs       rw,nosuid,nodev
| `-/dev/mqueue                                         mqueue      mqueue      rw,nosuid,nodev,noexec,relatime
|-/run                                                  tmpfs       tmpfs       rw,nosuid,nodev,noexec,relatime,size=388204k,mode=755
| |-/run/lock                                           tmpfs       tmpfs       rw,nosuid,nodev,noexec,relatime,size=5120k
| |-/run/credentials/systemd-sysctl.service             ramfs       ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-sysusers.service           ramfs       ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/credentials/systemd-tmpfiles-setup-dev.service ramfs       ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| |-/run/rpc_pipefs                                     sunrpc      rpc_pipefs  rw,relatime
| |-/run/credentials/systemd-tmpfiles-setup.service     ramfs       ramfs       ro,nosuid,nodev,noexec,relatime,mode=700
| `-/run/user/1000                                      tmpfs       tmpfs       rw,nosuid,nodev,relatime,size=388204k,nr_inodes=97051,mode=700,uid=1000,gid=1000
`-/boot/firmware                                        /dev/sda1   vfat        rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
521M	/var/
203M	/var/cache
197M	/var/cache/apt
161M	/var/lib
133M	/var/lib/apt/lists

Archived and active journals take up 56.0M in the file system.

/opt/iobroker/backups:
2.9M	/opt/iobroker/backups/

/opt/iobroker/iobroker-data:
69M	/opt/iobroker/iobroker-data/
30M	/opt/iobroker/iobroker-data/backup-objects
22M	/opt/iobroker/iobroker-data/files
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js
13M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static

The five largest files in iobroker-data are:
14M	/opt/iobroker/iobroker-data/objects.jsonl
6.3M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js.map
3.3M	/opt/iobroker/iobroker-data/states.jsonl
2.8M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_js-node_modules_iobr-99c23e.847b8ad9.chunk.js
1.6M	/opt/iobroker/iobroker-data/files/admin.admin/custom/static/js/vendors-node_modules_mui_material_Accordion_index_js-node_modules_mui_material_AccordionDetai-57e02d.0886b730.chunk.js.map

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id':

find: '/dev/serial/by-id/': No such file or directory
No Devices found 'by-id'

HINT:
COM-Port in your ZigBee-Instance ist not set to the 'by-id'-Link. Please check that!

*** NodeJS-Installation ***

/usr/bin/nodejs 	v18.20.1
/usr/bin/node 		v18.20.1
/usr/bin/npm 		10.5.0
/usr/bin/npx 		10.5.0
/usr/bin/corepack 	0.25.2


nodejs:
  Installed: 18.20.1-1nodesource1
  Candidate: 18.20.1-1nodesource1
  Version table:
 *** 18.20.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     18.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.19.0+dfsg-6~deb12u1 500
        500 http://deb.debian.org/debian-security bookworm-security/main arm64 Packages
     18.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.13.0+dfsg1-1 500
        500 http://deb.debian.org/debian bookworm/main arm64 Packages
     18.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages
     18.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller: 	5.0.19
admin: 		6.13.16
javascript: 	"javascript" not found

Adapters from github: 	0

Adapter State
+ system.adapter.admin.0                  : admin                 : raspi4iobroker                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspi4iobroker                           -  enabled
+ system.adapter.discovery.0              : discovery             : raspi4iobroker                           -  enabled
+ system.adapter.zigbee.0                 : zigbee                : raspi4iobroker                           -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspi4iobroker                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : raspi4iobroker                           -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.13.16  , installed 6.13.16
Adapter    "backitup"     : 2.10.11  , installed 2.10.11
Adapter    "discovery"    : 4.4.0    , installed 4.4.0
Controller "js-controller": 5.0.19   , installed 5.0.19
Adapter    "zigbee"       : 1.10.1   , installed 1.10.1

Objects and States
Please stand by - This may take a while
Objects: 	172
States: 	127

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bookworm InRelease
Hit:2 http://deb.debian.org/debian-security bookworm-security InRelease            
Hit:3 http://archive.raspberrypi.com/debian bookworm InRelease                                           
Hit:4 http://deb.debian.org/debian bookworm-updates InRelease                                            
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease                      
Reading package lists... Done                                
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       930        674/iobroker.js-con 
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       923        674/iobroker.js-con 
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          2829       697/sshd: /usr/sbin 
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       7187       734/io.admin.0      
tcp6       0      0 :::22                   :::*                    LISTEN      0          2831       697/sshd: /usr/sbin 
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           104        2592       537/avahi-daemon: r 
udp        0      0 0.0.0.0:40558           0.0.0.0:*                           104        2594       537/avahi-daemon: r 
udp6       0      0 :::52192                :::*                                104        2595       537/avahi-daemon: r 
udp6       0      0 :::5353                 :::*                                104        2593       537/avahi-daemon: r 
udp6       0      0 fe80::a2e3:3846:8ea:546 :::*                                0          5830       630/NetworkManager  

*** Log File - Last 25 Lines ***

2024-04-07 19:36:09.155  - info: admin.0 (734) ==> Connected system.user.admin from ::ffff:192.168.178.24
2024-04-07 19:49:23.095  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 (force=false, process=true)
2024-04-07 19:49:23.107  - info: zigbee.0 (824) Got terminate signal TERMINATE_YOURSELF
2024-04-07 19:49:23.153  - info: host.raspi4iobroker stopInstance system.adapter.zigbee.0 send kill signal
2024-04-07 19:49:23.111  - info: zigbee.0 (824) cleaned everything up...
2024-04-07 19:49:23.115  - info: zigbee.0 (824) Zigbee: disabling joining new devices.
2024-04-07 19:49:23.332  - warn: zigbee.0 (824) Failed to stop zigbee during startup
2024-04-07 19:49:23.333  - info: zigbee.0 (824) terminating
2024-04-07 19:49:23.334  - info: zigbee.0 (824) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2024-04-07 19:49:23.612  - info: zigbee.0 (824) terminating
2024-04-07 19:49:23.917  - info: host.raspi4iobroker instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2024-04-07 19:49:26.191  - info: host.raspi4iobroker instance system.adapter.zigbee.0 started with pid 1140
2024-04-07 19:49:30.773  - info: zigbee.0 (1140) starting. Version 1.10.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v18.20.1, js-controller: 5.0.19
2024-04-07 19:49:30.881  - info: zigbee.0 (1140) delete old Backup files. keep only last 10
2024-04-07 19:49:30.883  - info: zigbee.0 (1140) Starting Zigbee  npm ...
2024-04-07 19:49:31.222  - error: zigbee.0 (1140) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0'"
2024-04-07 19:49:31.222  - error: zigbee.0 (1140) Failed to start Zigbee
2024-04-07 19:49:31.223  - error: zigbee.0 (1140) Error herdsman start
2024-04-07 19:49:31.239  - info: zigbee.0 (1140) Installed Version: iobroker.zigbee@1.10.1
2024-04-07 19:49:41.227  - info: zigbee.0 (1140) Try to reconnect. 1 attempts left
2024-04-07 19:49:41.229  - info: zigbee.0 (1140) Starting Zigbee  npm ...
2024-04-07 19:49:41.257  - error: zigbee.0 (1140) Starting zigbee-herdsman problem : "Error while opening serialport 'Error: Error: No such file or directory, cannot open /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_f8e52e2daaa4ed11aa9081582981d5c7-if00-port0'"
2024-04-07 19:49:41.259  - error: zigbee.0 (1140) Failed to start Zigbee
2024-04-07 19:49:41.261  - error: zigbee.0 (1140) Error herdsman start
2024-04-07 19:49:41.279  - info: zigbee.0 (1140) Installed Version: iobroker.zigbee@1.10.1

...und der Summary:

======================= SUMMARY =======================
			v.2024-04-07


 Static hostname: raspi4iobroker
       Icon name: computer
Operating System: Debian GNU/Linux 12 (bookworm)
          Kernel: Linux 6.6.20+rpt-rpi-v8
    Architecture: arm64

Installation: 		native
Kernel: 		aarch64
Userland: 		64 bit
Timezone: 		Europe/Berlin (CEST, +0200)
User-ID: 		1000
Display-Server: 	false
Boot Target: 		multi-user.target

Pending OS-Updates: 	0
Pending iob updates: 	0

Nodejs-Installation:
/usr/bin/nodejs 	v18.20.1
/usr/bin/node 		v18.20.1
/usr/bin/npm 		10.5.0
/usr/bin/npx 		10.5.0
/usr/bin/corepack 	0.25.2

Recommended versions are nodejs 18.20.1 and npm 10.5.0
Your nodejs installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            4.0G        614M        2.8G        1.2M        590M        3.4G
Swap:           104M          0B        104M
Total:          4.1G        614M        3.0G

Active iob-Instances: 	5
Active repo(s): stable

ioBroker Core: 		js-controller 		5.0.19
			admin 			6.13.16

ioBroker Status: 	iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : raspi4iobroker                           -  enabled, port: 8081, bind: 0.0.0.0, run as: admin

Objects: 		172
States: 		127

Size of iob-Database:

18M	/opt/iobroker/iobroker-data/objects.jsonl
3.4M	/opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

Thomas Braun

@klarie sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

find: '/dev/serial/by-id/': No such file or directory No Devices found 'by-id'

Da ist kein Gerät.

Klarie

@thomas-braun sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

@klarie

Auch keine Zahlendreher drin?

Beim "Copy&Paste" gehe ich nicht davon aus.

@wildbill sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

@klarie Beim Kopieren vielleicht versehentlich vorne order hinten ein Leerzeichen angehängt?
Einfach mal vorne das erste Zeichen löschen und nochmal neu manuell eingeben. Hinten das Gleiche.

Sag mal, kennst Du mich?
Habe ich geprüft. Keine Leerzeichen.

Thomas Braun

@klarie sagte in Nach Neuinstallation Fehler im Zigbee Adapter:

Keine Leerzeichen.

Richtig. Aber da ist 'kein Gerät' unter dieser Adresse wohnhaft.
Steck das Ding nochmal richtig rein...

NEWS

[gelöst] Nach Neuinstallation Fehler im Zigbee Adapter

Support us

777
Online

31.9k
Users

80.1k
Topics

1.3m
Posts

NEWS

[gelöst] Nach Neuinstallation Fehler im Zigbee Adapter

Support us

777Online

31.9kUsers

80.1kTopics

1.3mPosts

777
Online

31.9k
Users

80.1k
Topics

1.3m
Posts