UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Thomas Braun]

@bitwicht sagte in Ertrag (Tag, Monat, Jahr) berechnen und in Datei speichern:

Kann ich das irgendwie sehen wie das installiert wurde ?

Siehe vorstehende Antwort.

[bitwicht]

@Thomas-Braun

beim update eine Warnung:

W: An error occurred during the signature verification. The repository is not updated and the previous index files will be used. GPG error: https://apt.grafana.com stable InRelease: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Failed to fetch https://apt.grafana.com/dists/stable/InRelease  The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 963FA27710458545
W: Some index files failed to download. They have been ignored, or old ones used instead.

und dann:

pi@raspberrypi:~ $ apt policy influxdb*
N: Unable to locate package influxdb2-2.5.1-arm64.deb
N: Couldn't find any package by glob 'influxdb2-2.5.1-arm64.deb'
N: Unable to locate package influxdb2-client-2.5.0-linux-arm64
N: Couldn't find any package by glob 'influxdb2-client-2.5.0-linux-arm64'
N: Unable to locate package influxdb2-client-2.5.0-linux-arm64.tar.gz
N: Couldn't find any package by glob 'influxdb2-client-2.5.0-linux-arm64.tar.gz'

[Thomas Braun]

@bitwicht

rm influxdb*

Zu grafana:

sudo rm /etc/apt/sources.list.d/graf*
sudo apt-get install -y apt-transport-https
sudo apt-get install -y software-properties-common wget
sudo wget -q -O /usr/share/keyrings/grafana.key https://apt.grafana.com/gpg.key
echo "deb [signed-by=/usr/share/keyrings/grafana.key] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list

Dann nochmal

sudo apt update
apt policy influx*

[bitwicht]

@Thomas-Braun

das geht schon nicht

pi@raspberrypi:~ $ rm influxdb*
rm: cannot remove 'influxdb2-client-2.5.0-linux-arm64': Is a directory

[Thomas Braun]

@bitwicht

Dann musst du die grobe Drahtbürste verwenden.

rm -rf influxdb*

[bitwicht]

das ging

pi@raspberrypi:~ $ rm -rf influxdb*

pi@raspberrypi:~ $ apt policy influx*
influxdb2-cli:
  Installed: (none)
  Candidate: (none)
  Version table:
influxdb-client:
  Installed: (none)
  Candidate: 1.6.7~rc0-1+b5
  Version table:
     1.6.7~rc0-1+b5 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
influxdb-dev:
  Installed: (none)
  Candidate: (none)
  Version table:
influxdb:
  Installed: (none)
  Candidate: 1.6.7~rc0-1+b5
  Version table:
     1.6.7~rc0-1+b5 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
influxdb2:
  Installed: 2.5.1-1
  Candidate: 2.5.1-1
  Version table:
 *** 2.5.1-1 100
        100 /var/lib/dpkg/status

[Thomas Braun]

@bitwicht

Bitte auch den abschließenden, neuen Prompt zeigen. Dann sehe ich auch das die ganze Sache durchgelaufen ist.

[bitwicht]

da kam sonst nix

pi@raspberrypi:~ $ rm -rf influxdb*
pi@raspberrypi:~ $ 

[Thomas Braun]

@bitwicht sagte in Ertrag (Tag, Monat, Jahr) berechnen und in Datei speichern:

da kam sonst nix

Die Info ist wichtig.

wget -q https://repos.influxdata.com/influxdata-archive_compat.key
echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdata-archive_compat.gpg > /dev/null
echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
rm influxdata-archive_compat.key

Grafana hast du berichtigt? Siehe oben.

[bitwicht]

Entschuldige, ich dachte wir machen erst influx

hier bitte:

pi@raspberrypi:~ $ sudo rm /etc/apt/sources.list.d/graf*
pi@raspberrypi:~ $ sudo apt-get install -y apt-transport-https
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
apt-transport-https is already the newest version (2.2.4).
0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
pi@raspberrypi:~ $ sudo apt-get install -y software-properties-common wget
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
software-properties-common is already the newest version (0.96.20.2-2.1).
wget is already the newest version (1.21-1+deb11u1).
0 upgraded, 0 newly installed, 0 to remove and 39 not upgraded.
pi@raspberrypi:~ $ sudo wget -q -O /usr/share/keyrings/grafana.key https://apt.grafana.com/gpg.key
pi@raspberrypi:~ $ sudo wget -q -O /usr/share/keyrings/grafana.key https://apt.grafana.com/gpg.key
echo "deb [signed-by=/usr/share/keyrings/grafana.key] https://apt.grafana.com stable main" | sudo tee /etc/apt/sources.list.d/grafana.list
deb [signed-by=/usr/share/keyrings/grafana.key] https://apt.grafana.com stable main
pi@raspberrypi:~ $

pi@raspberrypi:~ $ sudo apt update
apt policy influx*
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Get:5 https://apt.grafana.com stable InRelease [5,983 B]
Get:6 https://deb.nodesource.com/node_16.x bullseye InRelease [4,586 B]
Get:7 https://dl.cloudsmith.io/public/evcc/stable/deb/debian bullseye InRelease [5,127 B]
Get:8 https://apt.grafana.com stable/main armhf Packages [114 kB]
Get:9 https://apt.grafana.com stable/main arm64 Packages [147 kB]
Fetched 272 kB in 2s (127 kB/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
40 packages can be upgraded. Run 'apt list --upgradable' to see them.
influxdb2-cli:
  Installed: (none)
  Candidate: (none)
  Version table:
influxdb-client:
  Installed: (none)
  Candidate: 1.6.7~rc0-1+b5
  Version table:
     1.6.7~rc0-1+b5 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
influxdb-dev:
  Installed: (none)
  Candidate: (none)
  Version table:
influxdb:
  Installed: (none)
  Candidate: 1.6.7~rc0-1+b5
  Version table:
     1.6.7~rc0-1+b5 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
influxdb2:
  Installed: 2.5.1-1
  Candidate: 2.5.1-1
  Version table:
 *** 2.5.1-1 100
        100 /var/lib/dpkg/status
pi@raspberrypi:~ $

[Thomas Braun]

@bitwicht

iob nodejs-update

[bitwicht]

pi@raspberrypi:~ $ iob nodejs-update
curl: no URL specified!
curl: try 'curl --help' or 'curl --manual' for more information
pi@raspberrypi:~ $

[Thomas Braun]

@bitwicht

iob stop
iob fix
iob start

wget -q https://repos.influxdata.com/influxdata-archive_compat.key
echo '393e8779c89ac8d958f81f942f9ad7fb82a25e133faddaf92e15b16e6ac9ce4c influxdata-archive_compat.key' | sha256sum -c && cat influxdata-archive_compat.key | gpg --dearmor | sudo tee /usr/share/keyrings/influxdata-archive_compat.gpg > /dev/null
echo 'deb [signed-by=/usr/share/keyrings/influxdata-archive_compat.gpg] https://repos.influxdata.com/debian stable main' | sudo tee /etc/apt/sources.list.d/influxdata.list
rm influxdata-archive_compat.key

iobroker nodejs-update

[bitwicht]

ich habe das gemacht aber kann nicht mehr alles kopieren
es kommt:

Nothing to do - Your installation is using the correct paths.
You are running nodejs v16.18.1. Do you want to install recommended version 18.19.0?
Press <y> to continue or any other key to quit

alles mit y bestätigen ?

[Thomas Braun]

@bitwicht

Ja, du willst nodejs@18 haben.

[bitwicht]

@Thomas-Braun

schaut gut aus

We tried our best to update or fix your nodejs. Please run iob diag again to verify.

*** RESTARTING ioBroker NOW! ***
 Please refresh or restart your browser in a few moments.

This system needs to be REBOOTED NOW!

reboot oder erst noch was anderes ?

[Thomas Braun]

@bitwicht

sudo reboot

Und dann nochmal

sudo apt update
apt policy influxdb*

[bitwicht]

@Thomas-Braun

pi@raspberrypi:~ $ sudo apt update
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian bullseye-updates InRelease
Hit:3 http://security.debian.org/debian-security bullseye-security InRelease
Hit:4 https://repos.influxdata.com/debian stable InRelease
Hit:5 https://deb.nodesource.com/node_18.x nodistro InRelease
Hit:6 https://apt.grafana.com stable InRelease
Hit:7 http://archive.raspberrypi.org/debian bullseye InRelease
Get:8 https://dl.cloudsmith.io/public/evcc/stable/deb/debian bullseye InRelease [5,127 B]
Fetched 5,127 B in 2s (2,799 B/s)
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
2 packages can be upgraded. Run 'apt list --upgradable' to see them.
pi@raspberrypi:~ $

und

pi@raspberrypi:~ $ apt policy influxdb*
influxdb2-cli:
  Installed: (none)
  Candidate: 2.7.3-1
  Version table:
     2.7.3-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.1-2 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.5.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
influxdb-client:
  Installed: (none)
  Candidate: 1.6.7~rc0-1+b5
  Version table:
     1.6.7~rc0-1+b5 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
influxdb-dev:
  Installed: (none)
  Candidate: (none)
  Version table:
influxdb2-client:
  Installed: (none)
  Candidate: 2.7.1-1
  Version table:
     2.7.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
influxdb:
  Installed: (none)
  Candidate: 1.8.10-1
  Version table:
     1.8.10-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     1.6.7~rc0-1+b5 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
influxdb2:
  Installed: 2.7.4-1
  Candidate: 2.7.4-1
  Version table:
 *** 2.7.4-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
        100 /var/lib/dpkg/status
     2.7.3-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.7.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.6.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.5.1-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.4.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.3.0-1 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
     2.2.0 500
        500 https://repos.influxdata.com/debian stable/main arm64 Packages
pi@raspberrypi:~ $

[Thomas Braun]

@bitwicht

Das schaut schon ganz gut aus.

sudo apt full-upgrade

[bitwicht]

schaut ok aus

pi@raspberrypi:~ $ sudo apt full-upgrade
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
Calculating upgrade... Done
The following package was automatically installed and is no longer required:
  raspinfo
Use 'sudo apt autoremove' to remove it.
The following NEW packages will be installed:
  kms++-utils musl raspi-utils
The following packages will be upgraded:
  grafana raspinfo
2 upgraded, 3 newly installed, 0 to remove and 0 not upgraded.
Need to get 101 MB of archives.
After this operation, 68.9 MB of additional disk space will be used.
Do you want to continue? [Y/n]
Get:1 http://deb.debian.org/debian bullseye/main arm64 musl arm64 1.2.2-1 [399 kB]
Get:2 http://archive.raspberrypi.org/debian bullseye/main arm64 kms++-utils arm64 0~git20221104~171243+adc05b6-1 [81.4 kB]
Get:3 http://archive.raspberrypi.org/debian bullseye/main arm64 raspinfo all 20230123-1 [2,564 B]
Get:4 http://archive.raspberrypi.org/debian bullseye/main arm64 raspi-utils arm64 20230123-1 [41.8 kB]
Get:5 https://apt.grafana.com stable/main arm64 grafana arm64 10.2.3 [100 MB]
Fetched 101 MB in 19s (5,315 kB/s)
Reading changelogs... Done
Selecting previously unselected package musl:arm64.
(Reading database ... 59837 files and directories currently installed.)
Preparing to unpack .../musl_1.2.2-1_arm64.deb ...
Unpacking musl:arm64 (1.2.2-1) ...
Preparing to unpack .../grafana_10.2.3_arm64.deb ...
Unpacking grafana (10.2.3) over (9.2.4) ...
Selecting previously unselected package kms++-utils.
Preparing to unpack .../kms++-utils_0~git20221104~171243+adc05b6-1_arm64.deb ...
Unpacking kms++-utils (0~git20221104~171243+adc05b6-1) ...
Preparing to unpack .../raspinfo_20230123-1_all.deb ...
Unpacking raspinfo (20230123-1) over (20190624-1) ...
Selecting previously unselected package raspi-utils.
Preparing to unpack .../raspi-utils_20230123-1_arm64.deb ...
Unpacking raspi-utils (20230123-1) ...
Setting up kms++-utils (0~git20221104~171243+adc05b6-1) ...
Setting up musl:arm64 (1.2.2-1) ...
Setting up grafana (10.2.3) ...
Installing new version of config file /etc/init.d/grafana-server ...
Installing new version of config file /usr/lib/systemd/system/grafana-server.service ...
Restarting grafana-server service... OK
Setting up raspi-utils (20230123-1) ...
Setting up raspinfo (20230123-1) ...
Processing triggers for man-db (2.9.4-2) ...
pi@raspberrypi:~ $