[Gelöst] Update js-controller geht nicht
-
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypismarthome Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 13:39:16 up 2:19, 1 user, load average: 0.18, 0.07, 0.09 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-12-18 13:39:16 CET Universal time: Mon 2023-12-18 12:39:16 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 728M 1.5G 1.0M 1.6G 3.0G Swap: 99M 0B 99M Total: 3.9G 728M 1.6G 3794 M total memory 728 M used memory 801 M active memory 1225 M inactive memory 1495 M free memory 202 M buffer memory 1367 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * deconz-init.service loaded failed failed deCONZ: ZigBee gateway -- Initialisation * deconz-update.service loaded failed failed deCONZ: ZigBee gateway -- Update Service * deconz-wifi.service loaded failed failed deCONZ: ZigBee gateway -- WIFI Service LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 3 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 6.1G 22G 22% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.8M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 18 11:19:29 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:05:E4:1A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6ca1dc68-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 18 11:19:30 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Dec 18 11:19:30 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 18 11:19:32 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.1G /var/log/journal/2db8461036a4455ab0afd36ad1c9f367 1.1G /var/log/journal 1.1G /var/log 658M /var/cache Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 393M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 295M /opt/iobroker/iobroker-data/ 164M /opt/iobroker/iobroker-data/files 105M /opt/iobroker/iobroker-data/backup-objects 51M /opt/iobroker/iobroker-data/files/javascript.admin 43M /opt/iobroker/iobroker-data/files/iot.admin The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 9.1M /opt/iobroker/iobroker-data/objects.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: npm ERR! code ELSPROBLEMS npm ERR! invalid: @types/node@14.18.36 /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/node npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-12-18T12_39_24_312Z-debug-0.log *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : raspberrypismarthome - enabled + system.adapter.backitup.0 : backitup : raspberrypismarthome - enabled + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.discovery.0 : discovery : raspberrypismarthome - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypismarthome - enabled + system.adapter.info.0 : info : raspberrypismarthome - enabled + system.adapter.iot.0 : iot : raspberrypismarthome - enabled + system.adapter.javascript.0 : javascript : raspberrypismarthome - enabled + system.adapter.net-tools.0 : net-tools : raspberrypismarthome - enabled + system.adapter.ping.0 : ping : raspberrypismarthome - enabled + system.adapter.pushover.0 : pushover : raspberrypismarthome - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypismarthome - enabled system.adapter.vis.0 : vis : raspberrypismarthome - enabled + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.23.2 [Updatable] Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "fritzdect" : 2.5.9 , installed 2.2.6 [Updatable] Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 6.1.4 [Updatable] Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.24 , installed 1.8.10 [Updatable] Objects and States Please stand by - This may take a while Objects: 2017 States: 1715 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 48602 8219/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 50489 8219/iobroker.js-co tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 15069 831/smbd tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 11194 400/deCONZ tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 15070 831/smbd tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 12931 400/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14170 535/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 54627 9795/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 64933 12757/io.web.0 tcp6 0 0 :::445 :::* LISTEN 0 15067 831/smbd tcp6 0 0 :::139 :::* LISTEN 0 15068 831/smbd tcp6 0 0 :::22 :::* LISTEN 0 14172 535/sshd: /usr/sbin udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14033 392/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 58563 10450/io.deconz.1 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 14805 400/deCONZ udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14249 747/dhcpcd udp 0 0 192.168.178.255:137 0.0.0.0:* 0 16432 751/nmbd udp 0 0 192.168.178.48:137 0.0.0.0:* 0 16431 751/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 16415 751/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 16434 751/nmbd udp 0 0 192.168.178.48:138 0.0.0.0:* 0 16433 751/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 16416 751/nmbd udp 0 0 0.0.0.0:45598 0.0.0.0:* 108 14035 392/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14034 392/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 58565 10450/io.deconz.1 udp6 0 0 :::1900 :::* 1001 58564 10450/io.deconz.1 udp6 0 0 :::34833 :::* 108 14036 392/avahi-daemon: r udp6 0 0 :::546 :::* 0 14262 747/dhcpcd *** Log File - Last 25 Lines *** 2023-12-18 12:32:44.197 - info: host.raspberrypismarthome iobroker upload [18] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/swipe/img/noSwipe.jpg widgets/swipe/img/noSwipe.jpg image/jpeg 2023-12-18 12:32:44.210 - info: host.raspberrypismarthome iobroker upload [17] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/swipe/js/jquery.roundabout-shapes.js widgets/swipe/js/jquery.roundabout-shapes.js application/javascript 2023-12-18 12:32:44.222 - info: host.raspberrypismarthome iobroker upload [16] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/swipe/js/jquery.roundabout.min.js widgets/swipe/js/jquery.roundabout.min.js application/javascript 2023-12-18 12:32:44.236 - info: host.raspberrypismarthome iobroker upload [15] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/swipe/js/jquery.touchSwipe.min.js widgets/swipe/js/jquery.touchSwipe.min.js application/javascript 2023-12-18 12:32:44.248 - info: host.raspberrypismarthome iobroker upload [14] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/swipe.html widgets/swipe.html text/html 2023-12-18 12:32:44.260 - info: host.raspberrypismarthome iobroker upload [13] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/jquery.sliderTabs.js widgets/tabs/jquery.sliderTabs.js application/javascript 2023-12-18 12:32:44.277 - info: host.raspberrypismarthome iobroker upload [12] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/styles/images/indicator.png widgets/tabs/styles/images/indicator.png image/png 2023-12-18 12:32:44.289 - info: host.raspberrypismarthome iobroker upload [11] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/styles/images/indicatorActive.png widgets/tabs/styles/images/indicatorActive.png image/png 2023-12-18 12:32:44.301 - info: host.raspberrypismarthome iobroker upload [10] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/styles/images/leftArrow.png widgets/tabs/styles/images/leftArrow.png image/png 2023-12-18 12:32:44.313 - info: host.raspberrypismarthome iobroker upload [9] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/styles/images/leftPanelArrow.png widgets/tabs/styles/images/leftPanelArrow.png image/png 2023-12-18 12:32:44.325 - info: host.raspberrypismarthome iobroker upload [8] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/styles/images/rightArrow.png widgets/tabs/styles/images/rightArrow.png image/png 2023-12-18 12:32:44.340 - info: host.raspberrypismarthome iobroker upload [7] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/styles/images/rightPanelArrow.png widgets/tabs/styles/images/rightPanelArrow.png image/png 2023-12-18 12:32:44.353 - info: host.raspberrypismarthome iobroker upload [6] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/styles/jquery.sliderTabs.css widgets/tabs/styles/jquery.sliderTabs.css text/css 2023-12-18 12:32:44.365 - info: host.raspberrypismarthome iobroker upload [5] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs/styles/jquery.sliderTabs.min.css widgets/tabs/styles/jquery.sliderTabs.min.css text/css 2023-12-18 12:32:44.378 - info: host.raspberrypismarthome iobroker upload [4] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/tabs.html widgets/tabs.html text/html 2023-12-18 12:32:44.390 - info: host.raspberrypismarthome iobroker upload [3] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/todo/dev.html widgets/todo/dev.html text/html 2023-12-18 12:32:44.403 - info: host.raspberrypismarthome iobroker upload [2] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/todo/homematic.html widgets/todo/homematic.html text/html 2023-12-18 12:32:44.415 - info: host.raspberrypismarthome iobroker upload [1] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/todo/special.html widgets/todo/special.html text/html 2023-12-18 12:32:44.430 - info: host.raspberrypismarthome iobroker upload [0] vis /opt/iobroker/node_modules/iobroker.vis/www/widgets/todo/weather.html widgets/todo/weather.html text/html 2023-12-18 12:32:44.484 - info: host.raspberrypismarthome iobroker Update "system.adapter.vis.0" 2023-12-18 12:32:44.541 - info: host.raspberrypismarthome iobroker upload [0] vis.admin /opt/iobroker/node_modules/iobroker.vis/admin/vis.png vis.png image/png 2023-12-18 12:32:45.614 - info: host.raspberrypismarthome iobroker exit 0 2023-12-18 12:32:46.690 - info: vis.0 (12885) starting. Version 1.5.4 in /opt/iobroker/node_modules/iobroker.vis, node: v18.19.0, js-controller: 5.0.17 2023-12-18 12:32:47.358 - info: vis.0 (12885) Terminated (NO_ERROR): Without reason 2023-12-18 12:32:47.928 - info: host.raspberrypismarthome instance system.adapter.vis.0 terminated while should be started once============ Mark until here for C&P =============
iob diag has finished.
-
sudo systemctl set-default multi-user.targetWas ist denn mit dem 'deconz' los?
npm ERR! invalid: @types/node@14.18.36 /opt/iobroker/node_modules/iobroker.javascript/node_modules/@types/nodewürde mir auch zu denken geben. Renkt sich aber ggf. nach einem Neustart ein.
Schmeiß die Adapter-Updates drauf.
iob upgrade all -
@thomas-braun
=== Mark text until here for copying ===
pi@raspberrypismarthome:~ $ iob stop
pi@raspberrypismarthome:~ $ iob ugrade all
iobroker [command]Commands:
iobroker setup Setup ioBroker
iobroker start [all|<adapter>.<instance>|<adapter>] Starts the js-controller or a specified adapter instance or all instances of an adapter
iobroker stop [<adapter>.<instance>|<adapter>] stops the js-controller or a specified adapter instance or all instances of an adapter
iobroker restart [<adapter>.<instance>|<adapter>] Restarts js-controller or a specified adapter instance or all instances of an adapter [aliases: r]
iobroker debug <adapter>[.<instance>] Starts a Node.js debugging session for the adapter instance
iobroker info Shows the host info
iobroker logs [<adapter>] Monitor log
iobroker add <adapter> [desiredNumber] Add instance of adapter [aliases: a]
iobroker install <adapter> Installs a specified adapter [aliases: i]
iobroker rebuild [<module>] Rebuild all native modules or path
iobroker url <url> [<name>] Install adapter from specified url, e.g. GitHub
iobroker del <adapter> Remove adapter and all instances from this host [aliases: delete]
iobroker del <adapter>.<instance> Remove adapter instance [aliases: delete]
iobroker update [<repositoryUrl>] Update repository and list adapters
iobroker upgrade Upgrade management
iobroker upload [all|<adapter>] Upload management [aliases: u]
iobroker object Object management [aliases: o]
iobroker state State management [aliases: s]
iobroker message <adapter>[.instance] <command> [<message>] Send message to adapter instance/s
iobroker list <type> [<filter>] List all entries, like objects
iobroker chmod <mode> <file> Change file rights
iobroker chown <user> <group> <file> Change file ownership
iobroker touch <file> Touch file
iobroker rm <file> Remove file
iobroker file File management
iobroker user User commands
iobroker group group management
iobroker host <hostname> Set host to given hostname
iobroker set <adapter>.<instance> Change settings of adapter config
iobroker license <license.file or license.text> Update license by given file
iobroker cert Certificate management
iobroker clean <yes> Clears all objects and states
iobroker backup Create backup
iobroker restore <backup name or path> Restore a specified backup
iobroker validate <backup name or path> Validate a specified backup
iobroker status [all|<adapter>.<instance>] Status of ioBroker or adapter instance [aliases: isrun]
iobroker repo [<name>] Show repo information
iobroker uuid Show uuid of the installation [aliases: id]
iobroker unsetup Reset license, installation secret and language
iobroker fix Execute the installation fixer script, this updates your ioBroker installation
iobroker nodejs-update [<major-version>] Upgrade the Node.JS installation to the current LTS
iobroker multihost Multihost management
iobroker compact compact group management
iobroker plugin Plugin management
iobroker vendor <passphrase> [<vendor.json>] Update the vendor information using given passphrase
iobroker version [<adapter>] Show version of js-controller or specified adapter [aliases: v]Options:
--help Show help [boolean]
pi@raspberrypismarthome:~ $ -
-
@thomas-braun
Habe ich doch vor 3 Minuten gemacht! -
???
Du hast das falsch geschrieben und eine entsprechende Rückmeldung erhalten, aber kein upgrade durchgeführt. -
@thomas-braun
Wer lesen kann ist klar im Vorteil
-
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypismarthome Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 14:07:31 up 2:48, 1 user, load average: 1.44, 0.89, 0.48 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-12-18 14:07:32 CET Universal time: Mon 2023-12-18 13:07:32 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: graphical.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 606M 1.3G 1.0M 1.9G 3.1G Swap: 99M 0B 99M Total: 3.9G 606M 1.4G 3794 M total memory 606 M used memory 688 M active memory 1517 M inactive memory 1321 M free memory 207 M buffer memory 1658 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * deconz-init.service loaded failed failed deCONZ: ZigBee gateway -- Initialisation * deconz-update.service loaded failed failed deCONZ: ZigBee gateway -- Update Service * deconz-wifi.service loaded failed failed deCONZ: ZigBee gateway -- WIFI Service LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 3 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 6.1G 22G 22% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.8M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 18 11:19:29 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:05:E4:1A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6ca1dc68-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 18 11:19:30 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Dec 18 11:19:30 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 18 11:19:32 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.1G /var/log/journal/2db8461036a4455ab0afd36ad1c9f367 1.1G /var/log/journal 1.1G /var/log 658M /var/cache Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 393M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 313M /opt/iobroker/iobroker-data/ 180M /opt/iobroker/iobroker-data/files 105M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 9.7M /opt/iobroker/iobroker-data/objects.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypismarthome - enabled + system.adapter.backitup.0 : backitup : raspberrypismarthome - enabled + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.discovery.0 : discovery : raspberrypismarthome - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypismarthome - enabled + system.adapter.info.0 : info : raspberrypismarthome - enabled + system.adapter.iot.0 : iot : raspberrypismarthome - enabled + system.adapter.javascript.0 : javascript : raspberrypismarthome - enabled + system.adapter.net-tools.0 : net-tools : raspberrypismarthome - enabled + system.adapter.ping.0 : ping : raspberrypismarthome - enabled + system.adapter.pushover.0 : pushover : raspberrypismarthome - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypismarthome - enabled system.adapter.vis.0 : vis : raspberrypismarthome - enabled + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.24 , installed 1.8.24 Objects and States Please stand by - This may take a while Objects: 2050 States: 1756 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 87946 15594/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 87939 15594/iobroker.js-c tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 15069 831/smbd tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 11194 400/deCONZ tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 15070 831/smbd tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 12931 400/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 14170 535/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 90447 15612/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 90049 15972/io.web.0 tcp6 0 0 :::445 :::* LISTEN 0 15067 831/smbd tcp6 0 0 :::139 :::* LISTEN 0 15068 831/smbd tcp6 0 0 :::22 :::* LISTEN 0 14172 535/sshd: /usr/sbin udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14033 392/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 91665 16022/io.deconz.1 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 14805 400/deCONZ udp 0 0 0.0.0.0:68 0.0.0.0:* 0 14249 747/dhcpcd udp 0 0 192.168.178.255:137 0.0.0.0:* 0 16432 751/nmbd udp 0 0 192.168.178.48:137 0.0.0.0:* 0 16431 751/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 16415 751/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 16434 751/nmbd udp 0 0 192.168.178.48:138 0.0.0.0:* 0 16433 751/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 16416 751/nmbd udp 0 0 0.0.0.0:45598 0.0.0.0:* 108 14035 392/avahi-daemon: r udp6 0 0 :::5353 :::* 108 14034 392/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 91667 16022/io.deconz.1 udp6 0 0 :::1900 :::* 1001 91666 16022/io.deconz.1 udp6 0 0 :::34833 :::* 108 14036 392/avahi-daemon: r udp6 0 0 :::546 :::* 0 14262 747/dhcpcd *** Log File - Last 25 Lines *** 2023-12-18 14:07:42.363 - error: fritzdect.0 (15942) no response part in returned error message 2023-12-18 14:07:42.363 - error: fritzdect.0 (15942) API err => {"msg":"failed to get challenge","function":"get_sid","error":{"msg":"failed to login","function":"send_response","error":{"msg":"failed to login, wrong user name or password","function":"send_response","error":"0000000000000000"}}} 2023-12-18 14:07:42.364 - error: fritzdect.0 (15942) login not possible, check user and permissions 2023-12-18 14:07:43.505 - info: host.raspberrypismarthome instance system.adapter.web.0 started with pid 15972 2023-12-18 14:07:47.252 - info: web.0 (15972) starting. Version 6.1.10 in /opt/iobroker/node_modules/iobroker.web, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:07:47.570 - info: web.0 (15972) socket.io server listening on port 8082 2023-12-18 14:07:47.582 - info: web.0 (15972) http server listening on port 8082 2023-12-18 14:07:50.378 - info: vis.0 (15997) starting. Version 1.5.4 in /opt/iobroker/node_modules/iobroker.vis, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:07:51.083 - info: vis.0 (15997) Terminated (NO_ERROR): Without reason 2023-12-18 14:07:51.489 - info: host.raspberrypismarthome instance system.adapter.deconz.1 started with pid 16022 2023-12-18 14:07:51.682 - info: host.raspberrypismarthome instance system.adapter.vis.0 terminated while should be started once 2023-12-18 14:07:54.669 - info: deconz.1 (16022) starting. Version 1.3.23 in /opt/iobroker/node_modules/iobroker.deconz, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:07:54.881 - info: deconz.1 (16022) deConz Version: 2.24.2; API version: 1.16.0 2023-12-18 14:07:55.488 - info: host.raspberrypismarthome instance system.adapter.info.0 started with pid 16046 2023-12-18 14:07:59.511 - info: host.raspberrypismarthome instance system.adapter.iot.0 started with pid 16090 2023-12-18 14:08:01.351 - info: info.0 (16046) starting. Version 2.0.0 in /opt/iobroker/node_modules/iobroker.info, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:08:01.666 - info: info.0 (16046) Reading/updating systemdata. 2023-12-18 14:08:04.164 - info: info.0 (16046) cpu Temp res = {"main":47.225,"cores":[],"max":47.225,"socket":[],"chipset":null} 2023-12-18 14:08:05.265 - info: iot.0 (16090) starting. Version 2.0.11 in /opt/iobroker/node_modules/iobroker.iot, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:08:05.531 - info: iot.0 (16090) Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com 2023-12-18 14:08:06.392 - info: iot.0 (16090) Connection changed: connect "s_glebe66_googlemail_com" 2023-12-18 14:08:06.642 - info: alexa2.0 (15845) Subscribing to states... 2023-12-18 14:08:06.650 - info: alexa2.0 (15845) Deleting the following states: ["Smart-Home-Devices.deleteAll","Smart-Home-Devices.discoverDevices"] 2023-12-18 14:08:08.370 - info: alexa2.0 (15845) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-12-18 14:08:15.917 - info: alexa2.0 (15845) Initialization Done ...============ Mark until here for C&P =============
iob diag has finished.
-
Hast du das boot target gesetzt?
sudo systemctl set-default multi-user.target sudo rebootWas ist denn nun mit deconz los?
*** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * deconz-init.service loaded failed failed deCONZ: ZigBee gateway -- Initialisation * deconz-update.service loaded failed failed deCONZ: ZigBee gateway -- Update Service * deconz-wifi.service loaded failed failed deCONZ: ZigBee gateway -- WIFI Service -
@thomas-braun sagte in Update js-controller geht nicht:
sudo systemctl set-default multi-user.target
sudo rebootMuss ich diese beiden Befehle eingeben?
ioBroker vorher anhalten? -
@stephan1966 sagte in Update js-controller geht nicht:
Muss ich diese beiden Befehle eingeben?
ioBroker vorher anhalten?Ja / Nein.
-
@thomas-braun
======== Start marking the full check here =========Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypismarthome Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 14:25:37 up 1 min, 1 user, load average: 1.42, 0.45, 0.16 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Mon 2023-12-18 14:25:37 CET Universal time: Mon 2023-12-18 13:25:37 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 698M 2.8G 1.0M 293M 3.0G Swap: 99M 0B 99M Total: 3.9G 698M 2.9G 3794 M total memory 698 M used memory 767 M active memory 119 M inactive memory 2802 M free memory 40 M buffer memory 252 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * deconz-init.service loaded failed failed deCONZ: ZigBee gateway -- Initialisation * deconz-update.service loaded failed failed deCONZ: ZigBee gateway -- Update Service * deconz-wifi.service loaded failed failed deCONZ: ZigBee gateway -- WIFI Service LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 3 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 6.1G 22G 22% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.8M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 18 14:24:23 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:05:E4:1A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6ca1dc68-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 18 14:24:24 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Dec 18 14:24:24 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 18 14:24:27 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.1G /var/log/journal/2db8461036a4455ab0afd36ad1c9f367 1.1G /var/log/journal 1.1G /var/log 658M /var/cache Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 393M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 315M /opt/iobroker/iobroker-data/ 180M /opt/iobroker/iobroker-data/files 105M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypismarthome - enabled + system.adapter.backitup.0 : backitup : raspberrypismarthome - enabled + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.discovery.0 : discovery : raspberrypismarthome - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypismarthome - enabled + system.adapter.info.0 : info : raspberrypismarthome - enabled + system.adapter.iot.0 : iot : raspberrypismarthome - enabled + system.adapter.javascript.0 : javascript : raspberrypismarthome - enabled + system.adapter.net-tools.0 : net-tools : raspberrypismarthome - enabled + system.adapter.ping.0 : ping : raspberrypismarthome - enabled + system.adapter.pushover.0 : pushover : raspberrypismarthome - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypismarthome - enabled system.adapter.vis.0 : vis : raspberrypismarthome - enabled + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.24 , installed 1.8.24 Objects and States Please stand by - This may take a while Objects: 2065 States: 1769 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 13818 399/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13783 523/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12213 504/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 14838 504/iobroker.js-con tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 14054 753/smbd tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 12175 399/deCONZ tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 14053 753/smbd tcp6 0 0 :::8081 :::* LISTEN 1001 15694 676/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 17553 1023/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 13785 523/sshd: /usr/sbin tcp6 0 0 :::139 :::* LISTEN 0 14052 753/smbd tcp6 0 0 :::445 :::* LISTEN 0 14051 753/smbd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 2041 393/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 17621 1083/io.deconz.1 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 15442 399/deCONZ udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13837 747/dhcpcd udp 0 0 192.168.178.255:137 0.0.0.0:* 0 13983 748/nmbd udp 0 0 192.168.178.48:137 0.0.0.0:* 0 13982 748/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 13966 748/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 13985 748/nmbd udp 0 0 192.168.178.48:138 0.0.0.0:* 0 13984 748/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 13967 748/nmbd udp 0 0 0.0.0.0:51768 0.0.0.0:* 108 2043 393/avahi-daemon: r udp6 0 0 :::5353 :::* 108 2042 393/avahi-daemon: r udp6 0 0 :::48542 :::* 108 2044 393/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 17623 1083/io.deconz.1 udp6 0 0 :::1900 :::* 1001 17622 1083/io.deconz.1 udp6 0 0 :::546 :::* 0 13850 747/dhcpcd *** Log File - Last 25 Lines *** 2023-12-18 14:25:19.593 - error: fritzdect.0 (1008) no response part in returned error message 2023-12-18 14:25:19.593 - error: fritzdect.0 (1008) API err => {"msg":"failed to get challenge","function":"get_sid","error":{"msg":"failed to login","function":"send_response","error":{"msg":"failed to login, wrong user name or password","function":"send_response","error":"0000000000000000"}}} 2023-12-18 14:25:19.594 - error: fritzdect.0 (1008) login not possible, check user and permissions 2023-12-18 14:25:20.809 - info: host.raspberrypismarthome instance system.adapter.web.0 started with pid 1023 2023-12-18 14:25:24.559 - info: web.0 (1023) starting. Version 6.1.10 in /opt/iobroker/node_modules/iobroker.web, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:25:25.051 - info: web.0 (1023) socket.io server listening on port 8082 2023-12-18 14:25:25.059 - info: web.0 (1023) http server listening on port 8082 2023-12-18 14:25:27.639 - info: vis.0 (1059) starting. Version 1.5.4 in /opt/iobroker/node_modules/iobroker.vis, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:25:28.699 - info: vis.0 (1059) Terminated (NO_ERROR): Without reason 2023-12-18 14:25:28.750 - info: host.raspberrypismarthome instance system.adapter.deconz.1 started with pid 1083 2023-12-18 14:25:29.290 - info: host.raspberrypismarthome instance system.adapter.vis.0 terminated while should be started once 2023-12-18 14:25:31.643 - info: alexa2.0 (939) Subscribing to states... 2023-12-18 14:25:31.653 - info: alexa2.0 (939) Deleting the following states: ["Smart-Home-Devices.deleteAll","Smart-Home-Devices.discoverDevices"] 2023-12-18 14:25:31.867 - info: deconz.1 (1083) starting. Version 1.3.23 in /opt/iobroker/node_modules/iobroker.deconz, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:25:32.013 - info: deconz.1 (1083) deConz Version: 2.24.2; API version: 1.16.0 2023-12-18 14:25:32.791 - info: host.raspberrypismarthome instance system.adapter.info.0 started with pid 1107 2023-12-18 14:25:33.549 - info: alexa2.0 (939) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-12-18 14:25:36.750 - info: host.raspberrypismarthome instance system.adapter.iot.0 started with pid 1133 2023-12-18 14:25:38.276 - info: info.0 (1107) starting. Version 2.0.0 in /opt/iobroker/node_modules/iobroker.info, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:25:38.565 - info: info.0 (1107) Reading/updating systemdata. 2023-12-18 14:25:40.091 - info: info.0 (1107) cpu Temp res = {"main":46.738,"cores":[],"max":46.738,"socket":[],"chipset":null} 2023-12-18 14:25:40.203 - info: alexa2.0 (939) Initialization Done ... 2023-12-18 14:25:41.632 - info: iot.0 (1133) starting. Version 2.0.11 in /opt/iobroker/node_modules/iobroker.iot, node: v18.19.0, js-controller: 5.0.17 2023-12-18 14:25:41.783 - info: iot.0 (1133) Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com 2023-12-18 14:25:42.623 - info: iot.0 (1133) Connection changed: connect "s_glebe66_googlemail_com"============ Mark until here for C&P =============
iob diag has finished.
-
@thomas-braun sagte in Update js-controller geht nicht:
@stephan1966 sagte in Update js-controller geht nicht:
Muss ich diese beiden Befehle eingeben?
ioBroker vorher anhalten?Ja / Nein.
ist erledigt
-
@thomas-braun sagte in Update js-controller geht nicht:
Was ist denn mit dem 'deconz' los?
Nachfolgend der aktuelle Stand, ich glaube es ist noch nicht OK oder?
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypismarthome Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 12:52:33 up 22:28, 1 user, load average: 0.15, 0.03, 0.01 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2023-12-19 12:52:33 CET Universal time: Tue 2023-12-19 11:52:33 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 816M 2.4G 1.0M 588M 2.9G Swap: 99M 0B 99M Total: 3.9G 816M 2.5G 3794 M total memory 816 M used memory 895 M active memory 367 M inactive memory 2389 M free memory 89 M buffer memory 499 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * deconz-init.service loaded failed failed deCONZ: ZigBee gateway -- Initialisation * deconz-update.service loaded failed failed deCONZ: ZigBee gateway -- Update Service * deconz-wifi.service loaded failed failed deCONZ: ZigBee gateway -- WIFI Service LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 3 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 6.2G 22G 23% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.8M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Mon Dec 18 14:24:23 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:05:E4:1A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6ca1dc68-02 rootfstype=ext4 fsck.repair=yes rootwait [Mon Dec 18 14:24:24 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Mon Dec 18 14:24:24 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mon Dec 18 14:24:27 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.1G /var/log/journal/2db8461036a4455ab0afd36ad1c9f367 1.1G /var/log/journal 1.1G /var/log 658M /var/cache Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 396M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 329M /opt/iobroker/iobroker-data/ 180M /opt/iobroker/iobroker-data/files 105M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 24M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypismarthome - enabled + system.adapter.backitup.0 : backitup : raspberrypismarthome - enabled + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.discovery.0 : discovery : raspberrypismarthome - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypismarthome - enabled + system.adapter.info.0 : info : raspberrypismarthome - enabled + system.adapter.iot.0 : iot : raspberrypismarthome - enabled + system.adapter.javascript.0 : javascript : raspberrypismarthome - enabled + system.adapter.net-tools.0 : net-tools : raspberrypismarthome - enabled + system.adapter.ping.0 : ping : raspberrypismarthome - enabled + system.adapter.pushover.0 : pushover : raspberrypismarthome - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypismarthome - enabled system.adapter.vis.0 : vis : raspberrypismarthome - enabled + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.24 , installed 1.8.24 Objects and States Please stand by - This may take a while Objects: 2065 States: 1761 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://archive.raspberrypi.org/debian bullseye InRelease Hit:3 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 13818 399/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 13783 523/sshd: /usr/sbin tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12213 504/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 14838 504/iobroker.js-con tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 14054 753/smbd tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 12175 399/deCONZ tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 14053 753/smbd tcp6 0 0 :::8081 :::* LISTEN 1001 15694 676/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 17553 1023/io.web.0 tcp6 0 0 :::22 :::* LISTEN 0 13785 523/sshd: /usr/sbin tcp6 0 0 :::139 :::* LISTEN 0 14052 753/smbd tcp6 0 0 :::445 :::* LISTEN 0 14051 753/smbd udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 2041 393/avahi-daemon: r udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 17621 1083/io.deconz.1 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 15442 399/deCONZ udp 0 0 0.0.0.0:68 0.0.0.0:* 0 13837 747/dhcpcd udp 0 0 192.168.178.255:137 0.0.0.0:* 0 13983 748/nmbd udp 0 0 192.168.178.48:137 0.0.0.0:* 0 13982 748/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 13966 748/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 13985 748/nmbd udp 0 0 192.168.178.48:138 0.0.0.0:* 0 13984 748/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 13967 748/nmbd udp 0 0 0.0.0.0:51768 0.0.0.0:* 108 2043 393/avahi-daemon: r udp6 0 0 :::5353 :::* 108 2042 393/avahi-daemon: r udp6 0 0 :::48542 :::* 108 2044 393/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 17623 1083/io.deconz.1 udp6 0 0 :::1900 :::* 1001 17622 1083/io.deconz.1 udp6 0 0 :::546 :::* 0 13850 747/dhcpcd *** Log File - Last 25 Lines *** 2023-12-19 00:22:45.291 - info: alexa2.0 (939) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-12-19 02:00:19.204 - error: backitup.0 (974) [iobroker/ftp] Error: Access to home directory not allowed. 2023-12-19 02:00:19.217 - error: backitup.0 (974) [iobroker] Error: Access to home directory not allowed. 2023-12-19 02:24:51.981 - info: admin.0 (676) Request actual repository... 2023-12-19 02:24:52.654 - info: host.raspberrypismarthome Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-12-19 02:24:58.132 - info: admin.0 (676) Repository received successfully. 2023-12-19 02:25:47.031 - info: info.0 (1107) Reading/updating systemdata. 2023-12-19 02:25:47.675 - info: info.0 (1107) cpu Temp res = {"main":41.868,"cores":[],"max":41.868,"socket":[],"chipset":null} 2023-12-19 03:18:22.246 - info: alexa2.0 (939) Alexa-Push-Connection disconnected - retry: Retry Connection in 1s (undefined: undefined) 2023-12-19 03:18:23.687 - info: alexa2.0 (939) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-12-19 05:56:01.651 - info: alexa2.0 (939) Alexa-Push-Connection disconnected - retry: Retry Connection in 1s (undefined: undefined) 2023-12-19 05:56:03.105 - info: alexa2.0 (939) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-12-19 08:44:32.929 - info: admin.0 (676) ==> Connected system.user.admin from ::ffff:192.168.178.59 2023-12-19 08:44:56.919 - info: admin.0 (676) ==> Connected system.user.admin from ::ffff:192.168.178.59 2023-12-19 08:44:59.590 - info: host.raspberrypismarthome Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-12-19 08:46:40.957 - info: admin.0 (676) <== Disconnect system.user.admin from ::ffff:192.168.178.59 2023-12-19 08:59:55.063 - info: alexa2.0 (939) Alexa-Push-Connection disconnected - retry: Retry Connection in 1s (undefined: undefined) 2023-12-19 08:59:56.533 - info: alexa2.0 (939) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-12-19 10:14:57.017 - info: admin.0 (676) ==> Connected system.user.admin from ::ffff:192.168.178.59 2023-12-19 10:14:59.037 - info: host.raspberrypismarthome Updating repository "stable" under "http://download.iobroker.net/sources-dist.json" 2023-12-19 10:15:37.424 - info: admin.0 (676) <== Disconnect system.user.admin from ::ffff:192.168.178.59 2023-12-19 10:21:47.849 - info: admin.0 (676) ==> Connected system.user.admin from ::ffff:192.168.178.59 2023-12-19 10:22:19.303 - info: admin.0 (676) <== Disconnect system.user.admin from ::ffff:192.168.178.59 2023-12-19 12:41:01.489 - info: alexa2.0 (939) Alexa-Push-Connection disconnected - retry: Retry Connection in 1s (undefined: undefined) 2023-12-19 12:41:02.953 - info: alexa2.0 (939) Alexa-Push-Connection (macDms = true) established. Disable Polling============ Mark until here for C&P =============
iob diag has finished.
-
@stephan1966 sagte in Update js-controller geht nicht:
Nachfolgend der aktuelle Stand, ich glaube es ist noch nicht OK oder?
Versuch mal, den deconz neuzuinstallieren.
sudo apt install --reinstall deconz -
@thomas-braun
ioBroker vorher anhalten? -
Sollte egal sein. Vielleicht den deconz-Adapter danach mal neustarten.
-
Hier das Ergebnis, sieht soweit ich das beurteilen kann noch genauso aus!
======== Start marking the full check here =========
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: raspberrypismarthome Icon name: computer Operating System: Raspbian GNU/Linux 11 (bullseye) Kernel: Linux 6.1.21-v8+ Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.2 Docker : false Virtualization : none Kernel : aarch64 Userland : armhf Systemuptime and Load: 14:56:47 up 2 min, 1 user, load average: 1.21, 0.66, 0.26 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Tue 2023-12-19 14:56:47 CET Universal time: Tue 2023-12-19 13:56:47 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 651M 2.8G 1.0M 302M 3.1G Swap: 99M 0B 99M Total: 3.9G 651M 2.9G 3794 M total memory 651 M used memory 725 M active memory 118 M inactive memory 2840 M free memory 41 M buffer memory 260 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION * deconz-init.service loaded failed failed deCONZ: ZigBee gateway -- Initialisation * deconz-update.service loaded failed failed deCONZ: ZigBee gateway -- Update Service * deconz-wifi.service loaded failed failed deCONZ: ZigBee gateway -- WIFI Service LOAD = Reflects whether the unit definition was properly loaded. ACTIVE = The high-level unit activation state, i.e. generalization of SUB. SUB = The low-level unit activation state, values depend on unit type. 3 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 29G 6.2G 22G 22% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 1.8M 758M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 51M 202M 20% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Tue Dec 19 14:54:28 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:05:E4:1A vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=6ca1dc68-02 rootfstype=ext4 fsck.repair=yes rootwait [Tue Dec 19 14:54:29 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Tue Dec 19 14:54:29 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Tue Dec 19 14:54:32 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 1.9G /var/ 1.1G /var/log/journal/2db8461036a4455ab0afd36ad1c9f367 1.1G /var/log/journal 1.1G /var/log 658M /var/cache Archived and active journals take up 1.0G in the file system. /opt/iobroker/backups: 396M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 310M /opt/iobroker/iobroker-data/ 180M /opt/iobroker/iobroker-data/files 105M /opt/iobroker/iobroker-data/backup-objects 67M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 33M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js.map 8.6M /opt/iobroker/iobroker-data/objects.jsonl 8.5M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.aaea95f8.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.19.0 /usr/bin/node v18.19.0 /usr/bin/npm 10.2.3 /usr/bin/npx 10.2.3 /usr/bin/corepack 0.22.0 nodejs: Installed: 18.19.0-1nodesource1 Candidate: 18.19.0-1nodesource1 Version table: *** 18.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 100 /var/lib/dpkg/status 18.18.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.2-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.1-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 18.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages 12.22.12~dfsg-1~deb11u4 500 500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: 7.1.6 Adapters from github: 0 Adapter State + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypismarthome - enabled + system.adapter.backitup.0 : backitup : raspberrypismarthome - enabled + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.discovery.0 : discovery : raspberrypismarthome - enabled + system.adapter.fritzdect.0 : fritzdect : raspberrypismarthome - enabled + system.adapter.info.0 : info : raspberrypismarthome - enabled + system.adapter.iot.0 : iot : raspberrypismarthome - enabled + system.adapter.javascript.0 : javascript : raspberrypismarthome - enabled + system.adapter.net-tools.0 : net-tools : raspberrypismarthome - enabled + system.adapter.ping.0 : ping : raspberrypismarthome - enabled + system.adapter.pushover.0 : pushover : raspberrypismarthome - enabled + system.adapter.tr-064.0 : tr-064 : raspberrypismarthome - enabled system.adapter.vis.0 : vis : raspberrypismarthome - enabled + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : raspberrypismarthome - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.deconz.1 : deconz : raspberrypismarthome - enabled, port: 80 + system.adapter.web.0 : web : raspberrypismarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "alexa2" : 3.26.3 , installed 3.26.3 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "deconz" : 1.3.23 , installed 1.3.23 Adapter "discovery" : 4.2.0 , installed 4.2.0 Adapter "fritzdect" : 2.5.9 , installed 2.5.9 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 2.0.11 , installed 2.0.11 Adapter "javascript" : 7.1.6 , installed 7.1.6 Controller "js-controller": 5.0.17 , installed 5.0.17 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "pushover" : 3.0.3 , installed 3.0.3 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 6.6.0 , installed 6.6.0 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "vis" : 1.5.4 , installed 1.5.4 Adapter "web" : 6.1.10 , installed 6.1.10 Adapter "ws" : 2.5.8 , installed 2.5.8 Adapter "zigbee" : 1.8.24 , installed 1.8.24 Objects and States Please stand by - This may take a while Objects: 2065 States: 1769 *** OS-Repositories and Updates *** Hit:1 http://phoscon.de/apt/deconz bullseye InRelease Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease Hit:3 http://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:445 0.0.0.0:* LISTEN 0 14205 816/smbd tcp 0 0 0.0.0.0:443 0.0.0.0:* LISTEN 1000 13015 400/deCONZ tcp 0 0 0.0.0.0:139 0.0.0.0:* LISTEN 0 14206 816/smbd tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 1000 12989 400/deCONZ tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 15042 537/sshd: /usr/sbin tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 13070 501/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12123 501/iobroker.js-con tcp6 0 0 :::445 :::* LISTEN 0 14203 816/smbd tcp6 0 0 :::139 :::* LISTEN 0 14204 816/smbd tcp6 0 0 :::22 :::* LISTEN 0 15044 537/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 13211 662/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 17527 1040/io.web.0 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1001 16822 1070/io.deconz.1 udp 0 0 0.0.0.0:1900 0.0.0.0:* 1000 15097 400/deCONZ udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12103 749/dhcpcd udp 0 0 192.168.178.255:137 0.0.0.0:* 0 14181 750/nmbd udp 0 0 192.168.178.48:137 0.0.0.0:* 0 14180 750/nmbd udp 0 0 0.0.0.0:137 0.0.0.0:* 0 14164 750/nmbd udp 0 0 192.168.178.255:138 0.0.0.0:* 0 14183 750/nmbd udp 0 0 192.168.178.48:138 0.0.0.0:* 0 14182 750/nmbd udp 0 0 0.0.0.0:138 0.0.0.0:* 0 14165 750/nmbd udp 0 0 0.0.0.0:41316 0.0.0.0:* 108 14958 394/avahi-daemon: r udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 14956 394/avahi-daemon: r udp6 0 0 :::1900 :::* 1001 16824 1070/io.deconz.1 udp6 0 0 :::1900 :::* 1001 16823 1070/io.deconz.1 udp6 0 0 :::45045 :::* 108 14959 394/avahi-daemon: r udp6 0 0 :::546 :::* 0 13027 749/dhcpcd udp6 0 0 :::5353 :::* 108 14957 394/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-12-19 14:55:23.658 - error: fritzdect.0 (1025) API err => {"msg":"failed to get challenge","function":"get_sid","error":{"msg":"failed to login","function":"send_response","error":{"msg":"failed to login, wrong user name or password","function":"send_response","error":"0000000000000000"}}} 2023-12-19 14:55:23.658 - error: fritzdect.0 (1025) login not possible, check user and permissions 2023-12-19 14:55:24.974 - info: host.raspberrypismarthome instance system.adapter.web.0 started with pid 1040 2023-12-19 14:55:28.042 - info: web.0 (1040) starting. Version 6.1.10 in /opt/iobroker/node_modules/iobroker.web, node: v18.19.0, js-controller: 5.0.17 2023-12-19 14:55:28.584 - info: web.0 (1040) socket.io server listening on port 8082 2023-12-19 14:55:28.603 - info: web.0 (1040) http server listening on port 8082 2023-12-19 14:55:31.435 - info: vis.0 (1055) starting. Version 1.5.4 in /opt/iobroker/node_modules/iobroker.vis, node: v18.19.0, js-controller: 5.0.17 2023-12-19 14:55:32.211 - info: vis.0 (1055) Terminated (NO_ERROR): Without reason 2023-12-19 14:55:32.794 - info: host.raspberrypismarthome instance system.adapter.vis.0 terminated while should be started once 2023-12-19 14:55:32.972 - info: host.raspberrypismarthome instance system.adapter.deconz.1 started with pid 1070 2023-12-19 14:55:35.726 - info: deconz.1 (1070) starting. Version 1.3.23 in /opt/iobroker/node_modules/iobroker.deconz, node: v18.19.0, js-controller: 5.0.17 2023-12-19 14:55:35.883 - info: deconz.1 (1070) deConz Version: 2.24.2; API version: 1.16.0 2023-12-19 14:55:36.496 - info: admin.0 (662) ==> Connected system.user.admin from ::ffff:192.168.178.59 2023-12-19 14:55:38.641 - info: host.raspberrypismarthome instance system.adapter.info.0 started with pid 1086 2023-12-19 14:55:41.025 - info: host.raspberrypismarthome instance system.adapter.iot.0 started with pid 1101 2023-12-19 14:55:45.888 - info: info.0 (1086) starting. Version 2.0.0 in /opt/iobroker/node_modules/iobroker.info, node: v18.19.0, js-controller: 5.0.17 2023-12-19 14:55:46.253 - info: info.0 (1086) Reading/updating systemdata. 2023-12-19 14:55:46.468 - info: iot.0 (1101) starting. Version 2.0.11 in /opt/iobroker/node_modules/iobroker.iot, node: v18.19.0, js-controller: 5.0.17 2023-12-19 14:55:46.638 - info: iot.0 (1101) Connecting with a18wym7vjdl22g.iot.eu-west-1.amazonaws.com 2023-12-19 14:55:47.531 - info: iot.0 (1101) Connection changed: connect "s_glebe66_googlemail_com" 2023-12-19 14:55:47.731 - info: info.0 (1086) cpu Temp res = {"main":46.251,"cores":[],"max":46.251,"socket":[],"chipset":null} 2023-12-19 14:55:49.207 - info: alexa2.0 (987) Subscribing to states... 2023-12-19 14:55:49.216 - info: alexa2.0 (987) Deleting the following states: ["Smart-Home-Devices.deleteAll","Smart-Home-Devices.discoverDevices"] 2023-12-19 14:55:51.087 - info: alexa2.0 (987) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-12-19 14:55:55.552 - info: alexa2.0 (987) Initialization Done ...============ Mark until here for C&P =============
iob diag has finished.
-
@stephan1966 sagte in Update js-controller geht nicht:
deconz-init.service
Dann musst du mal schauen, was da klemmen könnte.
systemctl status deconz* -
@thomas-braun sagte in Update js-controller geht nicht:
systemctl status deconz*
Ergebnis meiner Eingabe!
pi@raspberrypismarthome:~ $ systemctl status deconz*
Unit deconz-latest-beta.deb.service could not be found.
pi@raspberrypismarthome:~ $
