NEWS
oft Timeout und langsame Verbindung erkannt
ioBroker Allgemein
71
Beiträge
10
Kommentatoren
8.4k
Aufrufe
10
Watching
-
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Bin trotzdem alle Scripte durchgegangen und keine Fehler gefunden
Moin,
die Skripte haben auch keinen Fehler, sondern es wurde darauf gewartet, dass jemand ein Ergebnis liefert, deswegen
pending!
Läuft das CCU Geraffel, nicht böse gemeint, auch auf dem RasPI?VG
Bernd@dp20eic said in oft Timeout und langsame Verbindung erkannt:
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Bin trotzdem alle Scripte durchgegangen und keine Fehler gefunden
Moin,
die Skripte haben auch keinen Fehler, sondern es wurde darauf gewartet, dass jemand ein Ergebnis liefert, deswegen
pending!
Läuft das CCU Geraffel, nicht böse gemeint, auch auf dem RasPI?VG
BerndIm Prinzip. Die CCU hat einen Raspi 3
-
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Der ist die ganze Zeit schon aus.
Moin,
kann aber nicht sein -> hier https://forum.iobroker.net/topic/69696/oft-timeout-und-langsame-verbindung-erkannt/20?page=1 die Meldung
Cannot read compact mode by host "system.host.iobroker": timeoutHast Du den ausgeschaltet und nicht neu gestartet?
VG
Bernd@dp20eic
Ich habe nur in den Einstellungen des Host geschaut - und da war kein Haken :man-shrugging:
-
@haselchen
Ja, ich habe etliche Programme mit Scripten. Auf der CCU laufen sie alle einwandfrei.Bin trotzdem alle Scripte durchgegangen und keine Fehler gefunden
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Bin trotzdem alle Scripte durchgegangen und keine Fehler gefunden
Es wäre nicht das erst Mal, dass sich ich jemand die CCU blockiert, weil ein Skript ein (Endlos-)Schleife produziert. Die CCU, bzw. die Rega ist für so etwas anfällig, weil die Abarbeitung nacheinander erfolgt und nicht parallel, d.h. "wartet" ein Skript auf ein Ergebnis, geht in der Zeit nix anderes. Die CCU/Rega ist blockiert. Völlig egal was für Ressourcen die Hardware hat.
Ja, ich habe etliche Programme mit Scripten.
Weiterer und beliebter Fehler ist Dinge per Skript zu lösen, die sich ebenso gut mit einem zusammengeklickten Programm erledigen lassen würden. Nur eben ohne die Gefahr, sich die Rega zu blockieren.
Wie sieht Dein DutyCycle auf der CCU aus, wenn die Fehlermeldung in ioBroker auftaucht?
-
@dp20eic
Ich glaube, ich habe ein Problem mit dem Javasript-Adapter.
Nachdem der ioBroker im Moment recht normal lief, wollte ich ein Blockly erstellen, dass einen Daten aus einem Datenpunkt (Adapter Switchbot) in einen anderen Datenpunkt (Adapter hm-rega) schreibt.
Irgendwie waren dann nach dem Speichern des Blockly die gemachten Änderungen trotz speichern verschwunden.
Im Protokoll hatte ich dann diese Einträge (ich weiss aber nicht, ob die mit dem Problem zusammenhängen):
hm-rega.0 2023-11-02 11:56:49.508 warn Script "!# programs.fn 1.3 !# Dieses Script gibt eine Liste der Programme als JSON Strin" ignored, because still pending. hm-rega.0 2023-11-02 11:56:49.507 warn Script "!# pollingInv.fn 0.2 !# !# Dieses Script gibt die Systemvariablen (inklusive uns" ignored, because still pending. hm-rega.0 2023-11-02 11:56:49.507 warn Script "!# programs.fn 1.3 !# Dieses Script gibt eine Liste der Programme als JSON Strin" ignored, because still pending. hm-rega.0 2023-11-02 11:56:49.507 warn Script "!# pollingInv.fn 0.2 !# !# Dieses Script gibt die Systemvariablen (inklusive uns" ignored, because still pending. hm-rega.0 2023-11-02 11:56:49.506 warn Script "!# programs.fn 1.3 !# Dieses Script gibt eine Liste der Programme als JSON Strin" ignored, because still pending. hm-rega.0 2023-11-02 11:56:49.506 warn Script "!# pollingInv.fn 0.2 !# !# Dieses Script gibt die Systemvariablen (inklusive uns" ignored, because still pending.Ich bin ziemlich hilflos, wie ich das Problem eingrenzen und schlussendlich beheben kann.
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Nachdem der ioBroker im Moment recht normal lief, wollte ich ein Blockly erstellen, dass einen Daten aus einem Datenpunkt (Adapter Switchbot) in einen anderen Datenpunkt (Adapter hm-rega) schreibt.
WAS für ein Datenpunkt ist das genau, den Du da beschreiben willst? Eine selbst angelegte Systemvariable?
Markus
Bitte beachten:
Hinweise für gute Forenbeiträge
Maßnahmen zum Schutz des Forums -
@dp20eic
Ich habe nur in den Einstellungen des Host geschaut - und da war kein Haken :man-shrugging:
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Ich habe nur in den Einstellungen des Host geschaut - und da war kein Haken
Moin,
ja, ist ja auch alles richtig, nur hast Du
ioBrokerdanach auch einmal neu gestartet?
Oder muss ich Dich jetzt so verstehen, dass Du noch niiiiie DeinenioBrokerimKompaktmodusbetrieben hast?
Dann 🤔VG
BerndP.S.: zur CCU kann ich nichts Sinnvolles beitragen, da lasse ich mal die Wissenden ran :)
-
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Nachdem der ioBroker im Moment recht normal lief, wollte ich ein Blockly erstellen, dass einen Daten aus einem Datenpunkt (Adapter Switchbot) in einen anderen Datenpunkt (Adapter hm-rega) schreibt.
WAS für ein Datenpunkt ist das genau, den Du da beschreiben willst? Eine selbst angelegte Systemvariable?
@samson71 said in oft Timeout und langsame Verbindung erkannt:
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Nachdem der ioBroker im Moment recht normal lief, wollte ich ein Blockly erstellen, dass einen Daten aus einem Datenpunkt (Adapter Switchbot) in einen anderen Datenpunkt (Adapter hm-rega) schreibt.
WAS für ein Datenpunkt ist das genau, den Du da beschreiben willst? Eine selbst angelegte Systemvariable?
Der Duty-Cycle liegt immer zwischen 15% und (max) 25%.
Ja, der Datenpunkt ist selber angelegt
Gruss
Thomas -
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Ich habe nur in den Einstellungen des Host geschaut - und da war kein Haken
Moin,
ja, ist ja auch alles richtig, nur hast Du
ioBrokerdanach auch einmal neu gestartet?
Oder muss ich Dich jetzt so verstehen, dass Du noch niiiiie DeinenioBrokerimKompaktmodusbetrieben hast?
Dann 🤔VG
BerndP.S.: zur CCU kann ich nichts Sinnvolles beitragen, da lasse ich mal die Wissenden ran :)
@dp20eic said in oft Timeout und langsame Verbindung erkannt:
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Ich habe nur in den Einstellungen des Host geschaut - und da war kein Haken
Moin,
ja, ist ja auch alles richtig, nur hast Du
ioBrokerdanach auch einmal neu gestartet?
Oder muss ich Dich jetzt so verstehen, dass Du noch niiiiie DeinenioBrokerimKompaktmodusbetrieben hast?
Dann 🤔VG
BerndSagen wir mal so: Ich habe den Compact Modus nie bewusst angeschaltet...
Nachdem Thomas Braun geschrieben hatte, ich soll den CompactModus ausschalten, mußte ich erst suchen, wo ich das mache. -
@samson71 said in oft Timeout und langsame Verbindung erkannt:
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Nachdem der ioBroker im Moment recht normal lief, wollte ich ein Blockly erstellen, dass einen Daten aus einem Datenpunkt (Adapter Switchbot) in einen anderen Datenpunkt (Adapter hm-rega) schreibt.
WAS für ein Datenpunkt ist das genau, den Du da beschreiben willst? Eine selbst angelegte Systemvariable?
Der Duty-Cycle liegt immer zwischen 15% und (max) 25%.
Ja, der Datenpunkt ist selber angelegt
@thomas123-0
OK. Andere Idee:
Kannst Du mal den Datenpunkt zeigen den Du schreiben lassen willst? Deine CCU-Variable ist ja angelegt als Typ Zahl, aber ist der Datenpunkt der ausgelesen und geschrieben werden soll auch vom Typ Zahl oder liefert der z.B. einen String/Zeichenkette und Du versuchst dann diesen in ein Feld vom Typ Zahl schreiben zu lassen?
Ich lasse mir Shelly Werte in virtuelle HM-Geräte schreiben (Energie- und Temperaturwerte) um die den Räumen in der CCU zuordnen zu können und bin über die Datentypen auch schonmal gestolpert.Markus
Bitte beachten:
Hinweise für gute Forenbeiträge
Maßnahmen zum Schutz des Forums -
@thomas123-0
OK. Andere Idee:
Kannst Du mal den Datenpunkt zeigen den Du schreiben lassen willst? Deine CCU-Variable ist ja angelegt als Typ Zahl, aber ist der Datenpunkt der ausgelesen und geschrieben werden soll auch vom Typ Zahl oder liefert der z.B. einen String/Zeichenkette und Du versuchst dann diesen in ein Feld vom Typ Zahl schreiben zu lassen?
Ich lasse mir Shelly Werte in virtuelle HM-Geräte schreiben (Energie- und Temperaturwerte) um die den Räumen in der CCU zuordnen zu können und bin über die Datentypen auch schonmal gestolpert.@samson71 said in oft Timeout und langsame Verbindung erkannt:
@thomas123-0
OK. Andere Idee:
Kannst Du mal den Datenpunkt zeigen den Du schreiben lassen willst? Deine CCU-Variable ist ja angelegt als Typ Zahl, aber ist der Datenpunkt der ausgelesen und geschrieben werden soll auch vom Typ Zahl oder liefert der z.B. einen String/Zeichenkette und Du versuchst dann diesen in ein Feld vom Typ Zahl schreiben zu lassen?
Ich lasse mir Shelly Werte in virtuelle HM-Geräte schreiben (Energie- und Temperaturwerte) um die den Räumen in der CCU zuordnen zu können und bin über die Datentypen auch schonmal gestolpert.Es wird immer suspekter...
Im ioBroker ist der Datenpunkt jetzt beschrieben - in der CCU nicht.Gelesen werden soll dieser Datenpunkt:
{ "type": "state", "common": { "name": "only available for Meter/Humidifier devices. temperature in celsius", "type": "number", "role": "state", "read": true, "unit": "°C", "write": false }, "from": "system.adapter.switchbot-hub.0", "user": "system.user.admin", "ts": 1698934219327, "_id": "switchbot-hub.0.EF0E1F1B54DA.temperature", "acl": { "object": 1636, "state": 1636, "owner": "system.user.admin", "ownerGroup": "system.group.administrator" } }Beschrieben werden dieser Datenpunkt:
{ "_id": "hm-rega.0.56816", "type": "state", "common": { "name": "Waschk_Temp", "type": "number", "read": true, "write": true, "role": "state", "min": -20, "max": 40, "unit": "ºC" }, "native": { "Name": "Waschk_Temp", "TypeName": "VARDP", "DPInfo": "", "ValueMin": -20, "ValueMax": 40, "ValueUnit": "ºC", "ValueType": 4, "ValueSubType": 0, "ValueList": "" }, "from": "system.adapter.hm-rega.0", "user": "system.user.admin", "ts": 1698933878083, "acl": { "object": 1636, "state": 1636, "owner": "system.user.admin", "ownerGroup": "system.group.administrator" } }Gruss
Thomas -
@samson71 said in oft Timeout und langsame Verbindung erkannt:
@thomas123-0
OK. Andere Idee:
Kannst Du mal den Datenpunkt zeigen den Du schreiben lassen willst? Deine CCU-Variable ist ja angelegt als Typ Zahl, aber ist der Datenpunkt der ausgelesen und geschrieben werden soll auch vom Typ Zahl oder liefert der z.B. einen String/Zeichenkette und Du versuchst dann diesen in ein Feld vom Typ Zahl schreiben zu lassen?
Ich lasse mir Shelly Werte in virtuelle HM-Geräte schreiben (Energie- und Temperaturwerte) um die den Räumen in der CCU zuordnen zu können und bin über die Datentypen auch schonmal gestolpert.Es wird immer suspekter...
Im ioBroker ist der Datenpunkt jetzt beschrieben - in der CCU nicht.Gelesen werden soll dieser Datenpunkt:
{ "type": "state", "common": { "name": "only available for Meter/Humidifier devices. temperature in celsius", "type": "number", "role": "state", "read": true, "unit": "°C", "write": false }, "from": "system.adapter.switchbot-hub.0", "user": "system.user.admin", "ts": 1698934219327, "_id": "switchbot-hub.0.EF0E1F1B54DA.temperature", "acl": { "object": 1636, "state": 1636, "owner": "system.user.admin", "ownerGroup": "system.group.administrator" } }Beschrieben werden dieser Datenpunkt:
{ "_id": "hm-rega.0.56816", "type": "state", "common": { "name": "Waschk_Temp", "type": "number", "read": true, "write": true, "role": "state", "min": -20, "max": 40, "unit": "ºC" }, "native": { "Name": "Waschk_Temp", "TypeName": "VARDP", "DPInfo": "", "ValueMin": -20, "ValueMax": 40, "ValueUnit": "ºC", "ValueType": 4, "ValueSubType": 0, "ValueList": "" }, "from": "system.adapter.hm-rega.0", "user": "system.user.admin", "ts": 1698933878083, "acl": { "object": 1636, "state": 1636, "owner": "system.user.admin", "ownerGroup": "system.group.administrator" } }Ich habe jetzt nochmal iob diag laufen lassen
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 15:24:42 up 17:10, 4 users, load average: 1.13, 1.02, 0.83 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2023-11-02 15:24:42 CET Universal time: Thu 2023-11-02 14:24:42 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** Thomas /home/Thomas Thomas adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 2.9G 2.6G 1.2M 2.8G 5.3G Swap: 104M 0B 104M Total: 8.3G 2.9G 2.7G 7811 M total memory 2794 M used memory 2768 M active memory 2277 M inactive memory 2458 M free memory 132 M buffer memory 2549 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.2M 781M 1% /run /dev/mmcblk0p2 ext4 29G 4.6G 23G 17% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Nov 1 22:13:55 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:F5:7F:DE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=dfee57ec-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Wed Nov 1 22:13:58 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Nov 1 22:14:00 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 533M /var/ 201M /var/cache 195M /var/cache/apt 159M /var/lib 131M /var/lib/apt Archived and active journals take up 72.0M in the file system. /opt/iobroker/backups: 107M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 500M /opt/iobroker/iobroker-data/ 203M /opt/iobroker/iobroker-data/files 128M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 90M /opt/iobroker/iobroker-data/states.jsonl 77M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status No connection to databases possible ... Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 3 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.birthdays.0 : birthdays : iobroker - enabled system.adapter.botslab360.0 : botslab360 : iobroker - disabled + system.adapter.bring.0 : bring : iobroker - enabled system.adapter.chromecast.0 : chromecast : iobroker - disabled system.adapter.chromecast.1 : chromecast : iobroker - disabled system.adapter.cloud.0 : cloud : iobroker - disabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled system.adapter.flot.0 : flot : iobroker - disabled + system.adapter.history.0 : history : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled + system.adapter.info.0 : info : iobroker - enabled system.adapter.jarvis.0 : jarvis : iobroker - disabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.modbus.0 : modbus : iobroker - disabled + system.adapter.modbus.1 : modbus : iobroker - enabled system.adapter.net-tools.0 : net-tools : iobroker - disabled system.adapter.netatmo.0 : netatmo : iobroker - disabled system.adapter.openweathermap.0 : openweathermap : iobroker - disabled system.adapter.ping.0 : ping : iobroker - disabled system.adapter.simple-api.0 : simple-api : iobroker - disabled, port: 8087, bind: ::, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker - enabled system.adapter.sonos.0 : sonos : iobroker - disabled + system.adapter.switchbot-hub.0 : switchbot-hub : iobroker - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled system.adapter.tvprogram.0 : tvprogram : iobroker - disabled system.adapter.tvspielfilm.0 : tvspielfilm : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - disabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - disabled system.adapter.vis-map.0 : vis-map : iobroker - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - disabled system.adapter.vis-metro.0 : vis-metro : iobroker - disabled system.adapter.vis-players.0 : vis-players : iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - disabled system.adapter.vis.0 : vis : iobroker - disabled + system.adapter.vw-connect.0 : vw-connect : iobroker - enabled + system.adapter.vw-connect.1 : vw-connect : iobroker - enabled system.adapter.web.0 : web : iobroker - disabled, port: 8082, bind: 192.168.2.176, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker - enabled system.adapter.wifilight.0 : wifilight : iobroker - disabled + system.adapter.wolf-smartset.0 : wolf-smartset : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "birthdays" : 2.3.1 , installed 2.3.1 Adapter "botslab360" : 0.0.2 , installed 0.0.2 Adapter "bring" : 1.8.4 , installed 1.8.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.8 , installed 3.1.2 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.5.5 , installed 6.5.2 [Updatable] Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tvprogram" : 1.1.2 , installed 1.1.2 Adapter "tvspielfilm" : 2.0.5 , installed 2.0.5 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.4, installed 1.7.2 [Updatable] Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "vw-connect" : 0.0.67 , installed 0.2.0 Adapter "web" : 6.1.2 , installed 6.1.0 [Updatable] Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "wolf-smartset": 1.1.1 , installed 1.1.1 Adapter "ws" : 2.5.5 , installed 2.5.3 [Updatable] Objects and States Please stand by - This may take a while Objects: 57778 States: 51236 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.2.176:2010 0.0.0.0:* LISTEN 1001 307455 39627/io.hm-rpc.1 tcp 0 0 192.168.2.176:2001 0.0.0.0:* LISTEN 1001 306324 39533/io.hm-rpc.2 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 246518 31672/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 248002 31672/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16506 683/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 16508 683/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 247320 31692/io.admin.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13828 531/avahi-daemon: r udp 0 0 0.0.0.0:34964 0.0.0.0:* 104 13830 531/avahi-daemon: r udp6 0 0 fe80::8e9e:365c:6cc:546 :::* 0 262457 595/NetworkManager udp6 0 0 :::33666 :::* 104 13831 531/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13829 531/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-11-02 15:34:20.009 - info: javascript.0 (39160) script.js.Solar-Anlage.Einspeisung_Netzbezug: -0.46 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.aktuelle_Sonnenleistung, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650039,"q":0,"c":"script.js.Solar-Anlage.Aktuelle_Sonnenenergie","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698423250031} 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Einspeisung_Netzbezug, timerId=undefined) => {"val":-0.46,"ack":true,"ts":1698935650034,"q":0,"c":"script.js.Solar-Anlage.Einspeisung_Netzbezug","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698453580039} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Sonnenleistung: 0 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie-Aufladung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie-Entladung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz-Einspeisung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz-Bezug: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Zwischenwert 2: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Hausverbrauch 3: 0.46 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Hausverbrauch 7: 0.46 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: setForeignState(id=0_userdata.0.Solar-Anlage.Hausverbrauch, state={"val":0.46,"ack":true,"ts":1698935660022,"q":0,"from":"system.adapter.javascript.0","lc":1698453590030,"c":"script.js.Solar-Anlage.Hausverbrauch"}) 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Hausverbrauch, timerId=undefined) => {"val":0.46,"ack":true,"ts":1698935650024,"q":0,"c":"script.js.Solar-Anlage.Hausverbrauch","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698453590030} 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: "echter Hausverbrauch"0.46 2023-11-02 15:34:20.035 - info: javascript.0 (39160) script.js.Solar-Anlage.PV_Leistung_Aktuell: 0 2023-11-02 15:34:20.041 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: getState(id=modbus.0.holdingRegisters.62836_Batterieleistung, timerId=undefined) => {"val":0,"ack":true,"ts":1698451050825,"q":0,"from":"system.adapter.modbus.0","user":"system.user.admin","lc":1698451050825} 2023-11-02 15:34:20.042 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: setForeignState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, state={"val":0,"ack":true,"ts":1698935660042,"q":0,"from":"system.adapter.javascript.0","lc":1698451060050,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW"}) 2023-11-02 15:34:20.042 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: getState(id=0_userdata.0.Wechselrichter.Batterie_leistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1692188960003,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1692185360002} 2023-11-02 15:34:20.042 - warn: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: 0 2023-11-02 15:34:20.272 - info: tvspielfilm.0 (40340) Terminated (NO_ERROR): Without reason======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 5 Nodejs-Installation: /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.2G 2.1G 3.4G 1.2M 2.8G 6.1G Swap: 104M 0B 104M Total: 8.3G 2.1G 3.5G Active iob-Instances: 20 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : iobroker - disabled, port: 8082, bind: 192.168.2.176, run as: admin Objects: 57778 States: 51236 Size of iob-Database: 84M /opt/iobroker/iobroker-data/objects.jsonl 93M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Die Adapter, für die ein Update vorliegt, sind im Moment nicht aktiviert.
Gruss
Thomas -
Im ioBroker ist der Datenpunkt jetzt beschrieben - in der CCU nicht.
Dann wäre jetzt die Frage WIE Du das genau versucht hast umzusetzen, sprich wie sieht das Skript (Blockly) dazu aus, mit dem das ja scheinbar gemacht wurde.
Markus
Bitte beachten:
Hinweise für gute Forenbeiträge
Maßnahmen zum Schutz des Forums -
Ich habe jetzt nochmal iob diag laufen lassen
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 15:24:42 up 17:10, 4 users, load average: 1.13, 1.02, 0.83 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2023-11-02 15:24:42 CET Universal time: Thu 2023-11-02 14:24:42 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** Thomas /home/Thomas Thomas adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 2.9G 2.6G 1.2M 2.8G 5.3G Swap: 104M 0B 104M Total: 8.3G 2.9G 2.7G 7811 M total memory 2794 M used memory 2768 M active memory 2277 M inactive memory 2458 M free memory 132 M buffer memory 2549 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.2M 781M 1% /run /dev/mmcblk0p2 ext4 29G 4.6G 23G 17% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Nov 1 22:13:55 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:F5:7F:DE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=dfee57ec-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Wed Nov 1 22:13:58 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Nov 1 22:14:00 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 533M /var/ 201M /var/cache 195M /var/cache/apt 159M /var/lib 131M /var/lib/apt Archived and active journals take up 72.0M in the file system. /opt/iobroker/backups: 107M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 500M /opt/iobroker/iobroker-data/ 203M /opt/iobroker/iobroker-data/files 128M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 90M /opt/iobroker/iobroker-data/states.jsonl 77M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status No connection to databases possible ... Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 3 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.birthdays.0 : birthdays : iobroker - enabled system.adapter.botslab360.0 : botslab360 : iobroker - disabled + system.adapter.bring.0 : bring : iobroker - enabled system.adapter.chromecast.0 : chromecast : iobroker - disabled system.adapter.chromecast.1 : chromecast : iobroker - disabled system.adapter.cloud.0 : cloud : iobroker - disabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled system.adapter.flot.0 : flot : iobroker - disabled + system.adapter.history.0 : history : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled + system.adapter.info.0 : info : iobroker - enabled system.adapter.jarvis.0 : jarvis : iobroker - disabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.modbus.0 : modbus : iobroker - disabled + system.adapter.modbus.1 : modbus : iobroker - enabled system.adapter.net-tools.0 : net-tools : iobroker - disabled system.adapter.netatmo.0 : netatmo : iobroker - disabled system.adapter.openweathermap.0 : openweathermap : iobroker - disabled system.adapter.ping.0 : ping : iobroker - disabled system.adapter.simple-api.0 : simple-api : iobroker - disabled, port: 8087, bind: ::, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker - enabled system.adapter.sonos.0 : sonos : iobroker - disabled + system.adapter.switchbot-hub.0 : switchbot-hub : iobroker - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled system.adapter.tvprogram.0 : tvprogram : iobroker - disabled system.adapter.tvspielfilm.0 : tvspielfilm : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - disabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - disabled system.adapter.vis-map.0 : vis-map : iobroker - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - disabled system.adapter.vis-metro.0 : vis-metro : iobroker - disabled system.adapter.vis-players.0 : vis-players : iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - disabled system.adapter.vis.0 : vis : iobroker - disabled + system.adapter.vw-connect.0 : vw-connect : iobroker - enabled + system.adapter.vw-connect.1 : vw-connect : iobroker - enabled system.adapter.web.0 : web : iobroker - disabled, port: 8082, bind: 192.168.2.176, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker - enabled system.adapter.wifilight.0 : wifilight : iobroker - disabled + system.adapter.wolf-smartset.0 : wolf-smartset : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "birthdays" : 2.3.1 , installed 2.3.1 Adapter "botslab360" : 0.0.2 , installed 0.0.2 Adapter "bring" : 1.8.4 , installed 1.8.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.8 , installed 3.1.2 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.5.5 , installed 6.5.2 [Updatable] Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tvprogram" : 1.1.2 , installed 1.1.2 Adapter "tvspielfilm" : 2.0.5 , installed 2.0.5 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.4, installed 1.7.2 [Updatable] Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "vw-connect" : 0.0.67 , installed 0.2.0 Adapter "web" : 6.1.2 , installed 6.1.0 [Updatable] Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "wolf-smartset": 1.1.1 , installed 1.1.1 Adapter "ws" : 2.5.5 , installed 2.5.3 [Updatable] Objects and States Please stand by - This may take a while Objects: 57778 States: 51236 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.2.176:2010 0.0.0.0:* LISTEN 1001 307455 39627/io.hm-rpc.1 tcp 0 0 192.168.2.176:2001 0.0.0.0:* LISTEN 1001 306324 39533/io.hm-rpc.2 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 246518 31672/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 248002 31672/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16506 683/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 16508 683/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 247320 31692/io.admin.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13828 531/avahi-daemon: r udp 0 0 0.0.0.0:34964 0.0.0.0:* 104 13830 531/avahi-daemon: r udp6 0 0 fe80::8e9e:365c:6cc:546 :::* 0 262457 595/NetworkManager udp6 0 0 :::33666 :::* 104 13831 531/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13829 531/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-11-02 15:34:20.009 - info: javascript.0 (39160) script.js.Solar-Anlage.Einspeisung_Netzbezug: -0.46 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.aktuelle_Sonnenleistung, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650039,"q":0,"c":"script.js.Solar-Anlage.Aktuelle_Sonnenenergie","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698423250031} 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Einspeisung_Netzbezug, timerId=undefined) => {"val":-0.46,"ack":true,"ts":1698935650034,"q":0,"c":"script.js.Solar-Anlage.Einspeisung_Netzbezug","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698453580039} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Sonnenleistung: 0 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie-Aufladung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie-Entladung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz-Einspeisung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz-Bezug: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Zwischenwert 2: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Hausverbrauch 3: 0.46 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Hausverbrauch 7: 0.46 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: setForeignState(id=0_userdata.0.Solar-Anlage.Hausverbrauch, state={"val":0.46,"ack":true,"ts":1698935660022,"q":0,"from":"system.adapter.javascript.0","lc":1698453590030,"c":"script.js.Solar-Anlage.Hausverbrauch"}) 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Hausverbrauch, timerId=undefined) => {"val":0.46,"ack":true,"ts":1698935650024,"q":0,"c":"script.js.Solar-Anlage.Hausverbrauch","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698453590030} 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: "echter Hausverbrauch"0.46 2023-11-02 15:34:20.035 - info: javascript.0 (39160) script.js.Solar-Anlage.PV_Leistung_Aktuell: 0 2023-11-02 15:34:20.041 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: getState(id=modbus.0.holdingRegisters.62836_Batterieleistung, timerId=undefined) => {"val":0,"ack":true,"ts":1698451050825,"q":0,"from":"system.adapter.modbus.0","user":"system.user.admin","lc":1698451050825} 2023-11-02 15:34:20.042 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: setForeignState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, state={"val":0,"ack":true,"ts":1698935660042,"q":0,"from":"system.adapter.javascript.0","lc":1698451060050,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW"}) 2023-11-02 15:34:20.042 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: getState(id=0_userdata.0.Wechselrichter.Batterie_leistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1692188960003,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1692185360002} 2023-11-02 15:34:20.042 - warn: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: 0 2023-11-02 15:34:20.272 - info: tvspielfilm.0 (40340) Terminated (NO_ERROR): Without reason======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 5 Nodejs-Installation: /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.2G 2.1G 3.4G 1.2M 2.8G 6.1G Swap: 104M 0B 104M Total: 8.3G 2.1G 3.5G Active iob-Instances: 20 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : iobroker - disabled, port: 8082, bind: 192.168.2.176, run as: admin Objects: 57778 States: 51236 Size of iob-Database: 84M /opt/iobroker/iobroker-data/objects.jsonl 93M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Die Adapter, für die ein Update vorliegt, sind im Moment nicht aktiviert.
Ich hatte den (blöden?) Gedanken, ob es vielleicht am neuen Laptop (Windows 11) liegt.
Also habe ich den alten Laptop nochmal ausgepackt und ioBroker dort aufgerufen. Aber die gleichen "Symptome".
Dann bekam ich am alten Laptop diesen Fehler in der Console angezeigt:
sentry.iobroker.net/api/56/envelope/?sentry_key=504499a725eb4898930d3b9e9da95740&sentry_version=7&sentry_client=sentry.javascript.browser%2F7.62.0:1 Failed to load resource: the server responded with a status of 403 () [Deprecation] Listener added for a synchronous 'DOMNodeInserted' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMNodeRemoved' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMCharacterDataModified' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMSubtreeModified' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMNodeInserted' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMNodeRemoved' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMCharacterDataModified' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMSubtreeModified' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMNodeInserted' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMNodeRemoved' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMCharacterDataModified' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 [Deprecation] Listener added for a synchronous 'DOMSubtreeModified' DOM Mutation Event. This event type is deprecated (https://w3c.github.io/uievents/#legacy-event-types) and work is underway to remove it from this browser. Usage of this event listener will cause performance issues today, and represents a risk of future incompatibility. Consider using MutationObserver instead. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 + subscribe hm-rega.0.43532 + subscribe hm-rega.0.43533 + subscribe hm-rega.0.43534 + subscribe hm-rega.0.43535 + subscribe hm-rega.0.43536 + subscribe hm-rega.0.4362 + subscribe hm-rega.0.4387 + subscribe hm-rega.0.4388 + subscribe hm-rega.0.44422 + subscribe hm-rega.0.44498 + subscribe hm-rega.0.45077 + subscribe hm-rega.0.45152 + subscribe hm-rega.0.45153 + subscribe hm-rega.0.45289 + subscribe hm-rega.0.45290 + subscribe hm-rega.0.45408 + subscribe hm-rega.0.45728 + subscribe hm-rega.0.45729 + subscribe hm-rega.0.45824 + subscribe hm-rega.0.45825 + subscribe hm-rega.0.45920 + subscribe hm-rega.0.45921 + subscribe hm-rega.0.45999 + subscribe hm-rega.0.46000 + subscribe hm-rega.0.46205 + subscribe hm-rega.0.46699 + subscribe hm-rega.0.46700 + subscribe hm-rega.0.46701 + subscribe hm-rega.0.46702 + subscribe hm-rega.0.46703 + subscribe hm-rega.0.46704 + subscribe hm-rega.0.46705 + subscribe hm-rega.0.46706 + subscribe hm-rega.0.46707 + subscribe hm-rega.0.46708 + subscribe hm-rega.0.46709 + subscribe hm-rega.0.46710 + subscribe hm-rega.0.46711 + subscribe hm-rega.0.46712 + subscribe hm-rega.0.46713 + subscribe hm-rega.0.46714 + subscribe hm-rega.0.46715 + subscribe hm-rega.0.46716 + subscribe hm-rega.0.46751 + subscribe hm-rega.0.46752 + subscribe hm-rega.0.46753 + subscribe hm-rega.0.46754 + subscribe hm-rega.0.46755 + subscribe hm-rega.0.46756 + subscribe hm-rega.0.46757 + subscribe hm-rega.0.46758 + subscribe hm-rega.0.46759 + subscribe hm-rega.0.46760 + subscribe hm-rega.0.46761 + subscribe hm-rega.0.46762 + subscribe hm-rega.0.46763 + subscribe hm-rega.0.46764 + subscribe hm-rega.0.46765 + subscribe hm-rega.0.46766 + subscribe hm-rega.0.46767 + subscribe hm-rega.0.46768 + subscribe hm-rega.0.46809 + subscribe hm-rega.0.46810 + subscribe hm-rega.0.46811 + subscribe hm-rega.0.46812 + subscribe hm-rega.0.46813 + subscribe hm-rega.0.46825 + subscribe hm-rega.0.46826 + subscribe hm-rega.0.46827 + subscribe hm-rega.0.46828 + subscribe hm-rega.0.46829 + subscribe hm-rega.0.46841 + subscribe hm-rega.0.46842 + subscribe hm-rega.0.47012 + subscribe hm-rega.0.47013 + subscribe hm-rega.0.47105 + subscribe hm-rega.0.47106 + subscribe hm-rega.0.47188 + subscribe hm-rega.0.47189 + subscribe hm-rega.0.47711 + subscribe hm-rega.0.47768 + subscribe hm-rega.0.47883 + subscribe hm-rega.0.48302 + subscribe hm-rega.0.48303 + subscribe hm-rega.0.48304 + subscribe hm-rega.0.48305 + subscribe hm-rega.0.48306 + subscribe hm-rega.0.48307 + subscribe hm-rega.0.48333 + subscribe hm-rega.0.48397 + subscribe hm-rega.0.48399 + subscribe hm-rega.0.48401 + subscribe hm-rega.0.48546 + subscribe hm-rega.0.48547 + subscribe hm-rega.0.50060 + subscribe hm-rega.0.50061 + subscribe hm-rega.0.50140 + subscribe hm-rega.0.50175 + subscribe hm-rega.0.50214 + subscribe hm-rega.0.50270 + subscribe hm-rega.0.50271 + subscribe hm-rega.0.50330 + subscribe hm-rega.0.50331 + subscribe hm-rega.0.50332 + subscribe hm-rega.0.50333 + subscribe hm-rega.0.50393 + subscribe hm-rega.0.50394 + subscribe hm-rega.0.50395 + subscribe hm-rega.0.50396 + subscribe hm-rega.0.50397 + subscribe hm-rega.0.50413 + subscribe hm-rega.0.50414 + subscribe hm-rega.0.50415 + subscribe hm-rega.0.50416 + subscribe hm-rega.0.50417 + subscribe hm-rega.0.50418 + subscribe hm-rega.0.50419 + subscribe hm-rega.0.50420 + subscribe hm-rega.0.50421 + subscribe hm-rega.0.50422 + subscribe hm-rega.0.50423 + subscribe hm-rega.0.50424 + subscribe hm-rega.0.50425 + subscribe hm-rega.0.50426 + subscribe hm-rega.0.50427 + subscribe hm-rega.0.50458 + subscribe hm-rega.0.50459 + subscribe hm-rega.0.50460 + subscribe hm-rega.0.50461 + subscribe hm-rega.0.50462 + subscribe hm-rega.0.50693 + subscribe hm-rega.0.50694 + subscribe hm-rega.0.50695 + subscribe hm-rega.0.50696 + subscribe hm-rega.0.50697 + subscribe hm-rega.0.50698 + subscribe hm-rega.0.50699 + subscribe hm-rega.0.50700 + subscribe hm-rega.0.50701 + subscribe hm-rega.0.50702 + subscribe hm-rega.0.50703 + subscribe hm-rega.0.50704 + subscribe hm-rega.0.50705 + subscribe hm-rega.0.50706 + subscribe hm-rega.0.50707 + subscribe hm-rega.0.50708 + subscribe hm-rega.0.50709 + subscribe hm-rega.0.50710 + subscribe hm-rega.0.50711 + subscribe hm-rega.0.50712 + subscribe hm-rega.0.50713 + subscribe hm-rega.0.50714 + subscribe hm-rega.0.50715 + subscribe hm-rega.0.50716 + subscribe hm-rega.0.50717 + subscribe hm-rega.0.50844 + subscribe hm-rega.0.50845 + subscribe hm-rega.0.50846 + subscribe hm-rega.0.50847 + subscribe hm-rega.0.50848 + subscribe hm-rega.0.50849 + subscribe hm-rega.0.50850 + subscribe hm-rega.0.50851 + subscribe hm-rega.0.50852 + subscribe hm-rega.0.50853 + subscribe hm-rega.0.50854 + subscribe hm-rega.0.50855 + subscribe hm-rega.0.50948 + subscribe hm-rega.0.50949 + subscribe hm-rega.0.50950 + subscribe hm-rega.0.50951 + subscribe hm-rega.0.50952 + subscribe hm-rega.0.50953 + subscribe hm-rega.0.50954 + subscribe hm-rega.0.50955 + subscribe hm-rega.0.50956 + subscribe hm-rega.0.50957 + subscribe hm-rega.0.50958 + subscribe hm-rega.0.50959 + subscribe hm-rega.0.51043 + subscribe hm-rega.0.51044 + subscribe hm-rega.0.51045 + subscribe hm-rega.0.51046 + subscribe hm-rega.0.51047 + subscribe hm-rega.0.51048 + subscribe hm-rega.0.51049 + subscribe hm-rega.0.51050 + subscribe hm-rega.0.51051 + subscribe hm-rega.0.51052 + subscribe hm-rega.0.51053 + subscribe hm-rega.0.51054 + subscribe hm-rega.0.51104 + subscribe hm-rega.0.51105 + subscribe hm-rega.0.51106 + subscribe hm-rega.0.51107 + subscribe hm-rega.0.51108 + subscribe hm-rega.0.51109 + subscribe hm-rega.0.51110 + subscribe hm-rega.0.51111 + subscribe hm-rega.0.51112 + subscribe hm-rega.0.51113 + subscribe hm-rega.0.51114 + subscribe hm-rega.0.51115 + subscribe hm-rega.0.51116 + subscribe hm-rega.0.51117 + subscribe hm-rega.0.51118 + subscribe hm-rega.0.51119 + subscribe hm-rega.0.51120 + subscribe hm-rega.0.51121 + subscribe hm-rega.0.51122 + subscribe hm-rega.0.51123 + subscribe hm-rega.0.51124 + subscribe hm-rega.0.51125 + subscribe hm-rega.0.51126 + subscribe hm-rega.0.51172 + subscribe hm-rega.0.51569 + subscribe hm-rega.0.51570 + subscribe hm-rega.0.51737 + subscribe hm-rega.0.51764 + subscribe hm-rega.0.51795 + subscribe hm-rega.0.51796 + subscribe hm-rega.0.51799 + subscribe hm-rega.0.52030 + subscribe hm-rega.0.52031 + subscribe hm-rega.0.52032 + subscribe hm-rega.0.52033 + subscribe hm-rega.0.52034 + subscribe hm-rega.0.52146 + subscribe hm-rega.0.52463 + subscribe hm-rega.0.52578 + subscribe hm-rega.0.52579 + subscribe hm-rega.0.52745 + subscribe hm-rega.0.52778 + subscribe hm-rega.0.52814 + subscribe hm-rega.0.53256 + subscribe hm-rega.0.53338 + subscribe hm-rega.0.53495 + subscribe hm-rega.0.53496 + subscribe hm-rega.0.53521 + subscribe hm-rega.0.53523 + subscribe hm-rega.0.53536 + subscribe hm-rega.0.53559 + subscribe hm-rega.0.53613 + subscribe hm-rega.0.53614 + subscribe hm-rega.0.53615 + subscribe hm-rega.0.53616 + subscribe hm-rega.0.53617 + subscribe hm-rega.0.53707 + subscribe hm-rega.0.53752 + subscribe hm-rega.0.53754 + subscribe hm-rega.0.53767 + subscribe hm-rega.0.54127 + subscribe hm-rega.0.54323 + subscribe hm-rega.0.54349 + subscribe hm-rega.0.54438 + subscribe hm-rega.0.54485 + subscribe hm-rega.0.54544 + subscribe hm-rega.0.54597 + subscribe hm-rega.0.55028 + subscribe hm-rega.0.55029 + subscribe hm-rega.0.55030 + subscribe hm-rega.0.55031 + subscribe hm-rega.0.55032 + subscribe hm-rega.0.55033 + subscribe hm-rega.0.55034 + subscribe hm-rega.0.55805 + subscribe hm-rega.0.55904 + subscribe hm-rega.0.56743 + subscribe hm-rega.0.56744 + subscribe hm-rega.0.56758 + subscribe hm-rega.0.56759 + subscribe hm-rega.0.56760 + subscribe hm-rega.0.56761 + subscribe hm-rega.0.56786 + subscribe hm-rega.0.56787 + subscribe hm-rega.0.56800 + subscribe hm-rega.0.56801 + subscribe hm-rega.0.56814 + subscribe hm-rega.0.56815 + subscribe hm-rega.0.56816 + subscribe hm-rega.0.56817 + subscribe hm-rega.0.5764 + subscribe hm-rega.0.5765 + subscribe hm-rega.0.6817 + subscribe hm-rega.0.6818 + subscribe hm-rega.0.6915 + subscribe hm-rega.0.6916 + subscribe hm-rega.0.950 + subscribe hm-rega.0.alarms + subscribe hm-rega.0.maintenance + subscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34002600000 + subscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34002900000 + subscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003100000 + subscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003200000 + subscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003500000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.22003400000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.22003500000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000000000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000100000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000400000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000500000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000900000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34001100000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34001600000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34003300000 + subscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34004000000 + subscribe switchbot-hub.0.EF0E1F1B54DA.deviceId + subscribe switchbot-hub.0.EF0E1F1B54DA.deviceType + subscribe switchbot-hub.0.EF0E1F1B54DA.hubDeviceId + subscribe switchbot-hub.0.EF0E1F1B54DA.humidity + subscribe switchbot-hub.0.EF0E1F1B54DA.temperature Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 - unsubscribe hm-rega.0.45076 - unsubscribe hm-rega.0.10843 - unsubscribe hm-rega.0.10844 - unsubscribe hm-rega.0.11371 - unsubscribe hm-rega.0.1236 - unsubscribe hm-rega.0.13888 - unsubscribe hm-rega.0.13889 - unsubscribe hm-rega.0.14117 - unsubscribe hm-rega.0.14118 - unsubscribe hm-rega.0.14119 - unsubscribe hm-rega.0.14120 - unsubscribe hm-rega.0.14132 - unsubscribe hm-rega.0.14133 - unsubscribe hm-rega.0.14134 - unsubscribe hm-rega.0.14135 - unsubscribe hm-rega.0.14193 - unsubscribe hm-rega.0.14852 - unsubscribe hm-rega.0.15028 - unsubscribe hm-rega.0.16463 - unsubscribe hm-rega.0.16464 - unsubscribe hm-rega.0.17121 - unsubscribe hm-rega.0.17636 - unsubscribe hm-rega.0.17637 - unsubscribe hm-rega.0.17732 - unsubscribe hm-rega.0.17733 - unsubscribe hm-rega.0.17846 - unsubscribe hm-rega.0.17847 - unsubscribe hm-rega.0.18082 - unsubscribe hm-rega.0.18083 - unsubscribe hm-rega.0.19606 - unsubscribe hm-rega.0.19607 - unsubscribe hm-rega.0.2099 - unsubscribe hm-rega.0.21455 - unsubscribe hm-rega.0.22419 - unsubscribe hm-rega.0.22556 - unsubscribe hm-rega.0.22557 - unsubscribe hm-rega.0.22680 - unsubscribe hm-rega.0.22681 - unsubscribe hm-rega.0.22709 - unsubscribe hm-rega.0.22972 - unsubscribe hm-rega.0.22973 - unsubscribe hm-rega.0.23411 - unsubscribe hm-rega.0.23412 - unsubscribe hm-rega.0.23504 - unsubscribe hm-rega.0.23505 - unsubscribe hm-rega.0.23751 - unsubscribe hm-rega.0.24503 - unsubscribe hm-rega.0.24969 - unsubscribe hm-rega.0.24970 - unsubscribe hm-rega.0.25006 - unsubscribe hm-rega.0.25183 - unsubscribe hm-rega.0.25357 - unsubscribe hm-rega.0.25430 - unsubscribe hm-rega.0.25431 - unsubscribe hm-rega.0.25727 - unsubscribe hm-rega.0.25922 - unsubscribe hm-rega.0.25923 - unsubscribe hm-rega.0.26018 - unsubscribe hm-rega.0.26019 - unsubscribe hm-rega.0.26221 - unsubscribe hm-rega.0.26222 - unsubscribe hm-rega.0.27729 - unsubscribe hm-rega.0.27730 - unsubscribe hm-rega.0.28752 - unsubscribe hm-rega.0.2883 - unsubscribe hm-rega.0.2884 - unsubscribe hm-rega.0.28940 - unsubscribe hm-rega.0.29367 - unsubscribe hm-rega.0.29499 - unsubscribe hm-rega.0.30172 - unsubscribe hm-rega.0.30173 - unsubscribe hm-rega.0.32442 - unsubscribe hm-rega.0.34273 - unsubscribe hm-rega.0.34274 - unsubscribe hm-rega.0.34288 - unsubscribe hm-rega.0.34289 - unsubscribe hm-rega.0.34290 - unsubscribe hm-rega.0.34291 - unsubscribe hm-rega.0.34292 - unsubscribe hm-rega.0.34293 - unsubscribe hm-rega.0.34294 - unsubscribe hm-rega.0.34295 - unsubscribe hm-rega.0.34296 - unsubscribe hm-rega.0.34297 - unsubscribe hm-rega.0.34298 - unsubscribe hm-rega.0.34299 - unsubscribe hm-rega.0.34300 - unsubscribe hm-rega.0.34301 - unsubscribe hm-rega.0.34302 - unsubscribe hm-rega.0.34303 - unsubscribe hm-rega.0.34304 - unsubscribe hm-rega.0.34305 - unsubscribe hm-rega.0.34306 - unsubscribe hm-rega.0.34307 - unsubscribe hm-rega.0.34308 - unsubscribe hm-rega.0.34309 - unsubscribe hm-rega.0.34310 - unsubscribe hm-rega.0.34311 - unsubscribe hm-rega.0.34312 - unsubscribe hm-rega.0.34313 - unsubscribe hm-rega.0.34314 - unsubscribe hm-rega.0.34315 - unsubscribe hm-rega.0.34316 - unsubscribe hm-rega.0.34317 - unsubscribe hm-rega.0.34318 - unsubscribe hm-rega.0.34320 - unsubscribe hm-rega.0.34322 - unsubscribe hm-rega.0.34354 - unsubscribe hm-rega.0.34539 - unsubscribe hm-rega.0.38117 - unsubscribe hm-rega.0.38118 - unsubscribe hm-rega.0.38266 - unsubscribe hm-rega.0.38267 - unsubscribe hm-rega.0.38857 - unsubscribe hm-rega.0.40509 - unsubscribe hm-rega.0.40510 - unsubscribe hm-rega.0.40511 - unsubscribe hm-rega.0.40512 - unsubscribe hm-rega.0.41047 - unsubscribe hm-rega.0.41207 - unsubscribe hm-rega.0.41208 - unsubscribe hm-rega.0.41248 - unsubscribe hm-rega.0.42068 - unsubscribe hm-rega.0.42101 - unsubscribe hm-rega.0.42102 - unsubscribe hm-rega.0.42103 - unsubscribe hm-rega.0.42104 - unsubscribe hm-rega.0.42105 - unsubscribe hm-rega.0.42106 - unsubscribe hm-rega.0.42107 - unsubscribe hm-rega.0.42108 - unsubscribe hm-rega.0.42110 - unsubscribe hm-rega.0.42125 - unsubscribe hm-rega.0.42183 - unsubscribe hm-rega.0.42319 - unsubscribe hm-rega.0.42320 - unsubscribe hm-rega.0.42321 - unsubscribe hm-rega.0.42322 - unsubscribe hm-rega.0.42323 - unsubscribe hm-rega.0.42324 - unsubscribe hm-rega.0.42325 - unsubscribe hm-rega.0.42326 - unsubscribe hm-rega.0.42327 - unsubscribe hm-rega.0.42328 - unsubscribe hm-rega.0.42329 - unsubscribe hm-rega.0.42330 - unsubscribe hm-rega.0.42331 - unsubscribe hm-rega.0.42332 - unsubscribe hm-rega.0.42333 - unsubscribe hm-rega.0.42334 - unsubscribe hm-rega.0.42335 - unsubscribe hm-rega.0.42336 - unsubscribe hm-rega.0.42337 - unsubscribe hm-rega.0.42338 - unsubscribe hm-rega.0.42339 - unsubscribe hm-rega.0.42340 - unsubscribe hm-rega.0.42341 - unsubscribe hm-rega.0.42342 - unsubscribe hm-rega.0.42344 - unsubscribe hm-rega.0.42345 - unsubscribe hm-rega.0.42348 - unsubscribe hm-rega.0.42349 - unsubscribe hm-rega.0.42350 - unsubscribe hm-rega.0.42351 - unsubscribe hm-rega.0.42352 - unsubscribe hm-rega.0.42353 - unsubscribe hm-rega.0.42354 - unsubscribe hm-rega.0.42355 - unsubscribe hm-rega.0.42356 - unsubscribe hm-rega.0.42357 - unsubscribe hm-rega.0.42385 - unsubscribe hm-rega.0.42386 - unsubscribe hm-rega.0.42387 - unsubscribe hm-rega.0.42388 - unsubscribe hm-rega.0.42389 - unsubscribe hm-rega.0.42529 - unsubscribe hm-rega.0.42530 - unsubscribe hm-rega.0.42622 - unsubscribe hm-rega.0.42623 - unsubscribe hm-rega.0.42715 - unsubscribe hm-rega.0.42716 - unsubscribe hm-rega.0.42847 - unsubscribe hm-rega.0.42848 - unsubscribe hm-rega.0.4312 - unsubscribe hm-rega.0.4313 - unsubscribe hm-rega.0.43532 - unsubscribe hm-rega.0.43533 - unsubscribe hm-rega.0.43534 - unsubscribe hm-rega.0.43535 - unsubscribe hm-rega.0.43536 - unsubscribe hm-rega.0.4362 - unsubscribe hm-rega.0.4387 - unsubscribe hm-rega.0.4388 - unsubscribe hm-rega.0.44422 - unsubscribe hm-rega.0.44498 - unsubscribe hm-rega.0.45077 - unsubscribe hm-rega.0.45152 - unsubscribe hm-rega.0.45153 - unsubscribe hm-rega.0.45289 - unsubscribe hm-rega.0.45290 - unsubscribe hm-rega.0.45408 - unsubscribe hm-rega.0.45728 - unsubscribe hm-rega.0.45729 - unsubscribe hm-rega.0.45824 - unsubscribe hm-rega.0.45825 - unsubscribe hm-rega.0.45920 - unsubscribe hm-rega.0.45921 - unsubscribe hm-rega.0.45999 - unsubscribe hm-rega.0.46000 - unsubscribe hm-rega.0.46205 - unsubscribe hm-rega.0.46699 - unsubscribe hm-rega.0.46700 - unsubscribe hm-rega.0.46701 - unsubscribe hm-rega.0.46702 - unsubscribe hm-rega.0.46703 - unsubscribe hm-rega.0.46704 - unsubscribe hm-rega.0.46705 - unsubscribe hm-rega.0.46706 - unsubscribe hm-rega.0.46707 - unsubscribe hm-rega.0.46708 - unsubscribe hm-rega.0.46709 - unsubscribe hm-rega.0.46710 - unsubscribe hm-rega.0.46711 - unsubscribe hm-rega.0.46712 - unsubscribe hm-rega.0.46713 - unsubscribe hm-rega.0.46714 - unsubscribe hm-rega.0.46715 - unsubscribe hm-rega.0.46716 - unsubscribe hm-rega.0.46751 - unsubscribe hm-rega.0.46752 - unsubscribe hm-rega.0.46753 - unsubscribe hm-rega.0.46754 - unsubscribe hm-rega.0.46755 - unsubscribe hm-rega.0.46756 - unsubscribe hm-rega.0.46757 - unsubscribe hm-rega.0.46758 - unsubscribe hm-rega.0.46759 - unsubscribe hm-rega.0.46760 - unsubscribe hm-rega.0.46761 - unsubscribe hm-rega.0.46762 - unsubscribe hm-rega.0.46763 - unsubscribe hm-rega.0.46764 - unsubscribe hm-rega.0.46765 - unsubscribe hm-rega.0.46766 - unsubscribe hm-rega.0.46767 - unsubscribe hm-rega.0.46768 - unsubscribe hm-rega.0.46809 - unsubscribe hm-rega.0.46810 - unsubscribe hm-rega.0.46811 - unsubscribe hm-rega.0.46812 - unsubscribe hm-rega.0.46813 - unsubscribe hm-rega.0.46825 - unsubscribe hm-rega.0.46826 - unsubscribe hm-rega.0.46827 - unsubscribe hm-rega.0.46828 - unsubscribe hm-rega.0.46829 - unsubscribe hm-rega.0.46841 - unsubscribe hm-rega.0.46842 - unsubscribe hm-rega.0.47012 - unsubscribe hm-rega.0.47013 - unsubscribe hm-rega.0.47105 - unsubscribe hm-rega.0.47106 - unsubscribe hm-rega.0.47188 - unsubscribe hm-rega.0.47189 - unsubscribe hm-rega.0.47711 - unsubscribe hm-rega.0.47768 - unsubscribe hm-rega.0.47883 - unsubscribe hm-rega.0.48302 - unsubscribe hm-rega.0.48303 - unsubscribe hm-rega.0.48304 - unsubscribe hm-rega.0.48305 - unsubscribe hm-rega.0.48306 - unsubscribe hm-rega.0.48307 - unsubscribe hm-rega.0.48333 - unsubscribe hm-rega.0.48397 - unsubscribe hm-rega.0.48399 - unsubscribe hm-rega.0.48401 - unsubscribe hm-rega.0.48546 - unsubscribe hm-rega.0.48547 - unsubscribe hm-rega.0.50060 - unsubscribe hm-rega.0.50061 - unsubscribe hm-rega.0.50140 - unsubscribe hm-rega.0.50175 - unsubscribe hm-rega.0.50214 - unsubscribe hm-rega.0.50270 - unsubscribe hm-rega.0.50271 - unsubscribe hm-rega.0.50330 - unsubscribe hm-rega.0.50331 - unsubscribe hm-rega.0.50332 - unsubscribe hm-rega.0.50333 - unsubscribe hm-rega.0.50393 - unsubscribe hm-rega.0.50394 - unsubscribe hm-rega.0.50395 - unsubscribe hm-rega.0.50396 - unsubscribe hm-rega.0.50397 - unsubscribe hm-rega.0.50413 - unsubscribe hm-rega.0.50414 - unsubscribe hm-rega.0.50415 - unsubscribe hm-rega.0.50416 - unsubscribe hm-rega.0.50417 - unsubscribe hm-rega.0.50418 - unsubscribe hm-rega.0.50419 - unsubscribe hm-rega.0.50420 - unsubscribe hm-rega.0.50421 - unsubscribe hm-rega.0.50422 - unsubscribe hm-rega.0.50423 - unsubscribe hm-rega.0.50424 - unsubscribe hm-rega.0.50425 - unsubscribe hm-rega.0.50426 - unsubscribe hm-rega.0.50427 - unsubscribe hm-rega.0.50458 - unsubscribe hm-rega.0.50459 - unsubscribe hm-rega.0.50460 - unsubscribe hm-rega.0.50461 - unsubscribe hm-rega.0.50462 - unsubscribe hm-rega.0.50693 - unsubscribe hm-rega.0.50694 - unsubscribe hm-rega.0.50695 - unsubscribe hm-rega.0.50696 - unsubscribe hm-rega.0.50697 - unsubscribe hm-rega.0.50698 - unsubscribe hm-rega.0.50699 - unsubscribe hm-rega.0.50700 - unsubscribe hm-rega.0.50701 - unsubscribe hm-rega.0.50702 - unsubscribe hm-rega.0.50703 - unsubscribe hm-rega.0.50704 - unsubscribe hm-rega.0.50705 - unsubscribe hm-rega.0.50706 - unsubscribe hm-rega.0.50707 - unsubscribe hm-rega.0.50708 - unsubscribe hm-rega.0.50709 - unsubscribe hm-rega.0.50710 - unsubscribe hm-rega.0.50711 - unsubscribe hm-rega.0.50712 - unsubscribe hm-rega.0.50713 - unsubscribe hm-rega.0.50714 - unsubscribe hm-rega.0.50715 - unsubscribe hm-rega.0.50716 - unsubscribe hm-rega.0.50717 - unsubscribe hm-rega.0.50844 - unsubscribe hm-rega.0.50845 - unsubscribe hm-rega.0.50846 - unsubscribe hm-rega.0.50847 - unsubscribe hm-rega.0.50848 - unsubscribe hm-rega.0.50849 - unsubscribe hm-rega.0.50850 - unsubscribe hm-rega.0.50851 - unsubscribe hm-rega.0.50852 - unsubscribe hm-rega.0.50853 - unsubscribe hm-rega.0.50854 - unsubscribe hm-rega.0.50855 - unsubscribe hm-rega.0.50948 - unsubscribe hm-rega.0.50949 - unsubscribe hm-rega.0.50950 - unsubscribe hm-rega.0.50951 - unsubscribe hm-rega.0.50952 - unsubscribe hm-rega.0.50953 - unsubscribe hm-rega.0.50954 - unsubscribe hm-rega.0.50955 - unsubscribe hm-rega.0.50956 - unsubscribe hm-rega.0.50957 - unsubscribe hm-rega.0.50958 - unsubscribe hm-rega.0.50959 - unsubscribe hm-rega.0.51043 - unsubscribe hm-rega.0.51044 - unsubscribe hm-rega.0.51045 - unsubscribe hm-rega.0.51046 - unsubscribe hm-rega.0.51047 - unsubscribe hm-rega.0.51048 - unsubscribe hm-rega.0.51049 - unsubscribe hm-rega.0.51050 - unsubscribe hm-rega.0.51051 - unsubscribe hm-rega.0.51052 - unsubscribe hm-rega.0.51053 - unsubscribe hm-rega.0.51054 - unsubscribe hm-rega.0.51104 - unsubscribe hm-rega.0.51105 - unsubscribe hm-rega.0.51106 - unsubscribe hm-rega.0.51107 - unsubscribe hm-rega.0.51108 - unsubscribe hm-rega.0.51109 - unsubscribe hm-rega.0.51110 - unsubscribe hm-rega.0.51111 - unsubscribe hm-rega.0.51112 - unsubscribe hm-rega.0.51113 - unsubscribe hm-rega.0.51114 - unsubscribe hm-rega.0.51115 - unsubscribe hm-rega.0.51116 - unsubscribe hm-rega.0.51117 - unsubscribe hm-rega.0.51118 - unsubscribe hm-rega.0.51119 - unsubscribe hm-rega.0.51120 - unsubscribe hm-rega.0.51121 - unsubscribe hm-rega.0.51122 - unsubscribe hm-rega.0.51123 - unsubscribe hm-rega.0.51124 - unsubscribe hm-rega.0.51125 - unsubscribe hm-rega.0.51126 - unsubscribe hm-rega.0.51172 - unsubscribe hm-rega.0.51569 - unsubscribe hm-rega.0.51570 - unsubscribe hm-rega.0.51737 - unsubscribe hm-rega.0.51764 - unsubscribe hm-rega.0.51795 - unsubscribe hm-rega.0.51796 - unsubscribe hm-rega.0.51799 - unsubscribe hm-rega.0.52030 - unsubscribe hm-rega.0.52031 - unsubscribe hm-rega.0.52032 - unsubscribe hm-rega.0.52033 - unsubscribe hm-rega.0.52034 - unsubscribe hm-rega.0.52146 - unsubscribe hm-rega.0.52463 - unsubscribe hm-rega.0.52578 - unsubscribe hm-rega.0.52579 - unsubscribe hm-rega.0.52745 - unsubscribe hm-rega.0.52778 - unsubscribe hm-rega.0.52814 - unsubscribe hm-rega.0.53256 - unsubscribe hm-rega.0.53338 - unsubscribe hm-rega.0.53495 - unsubscribe hm-rega.0.53496 - unsubscribe hm-rega.0.53521 - unsubscribe hm-rega.0.53523 - unsubscribe hm-rega.0.53536 - unsubscribe hm-rega.0.53559 - unsubscribe hm-rega.0.53613 - unsubscribe hm-rega.0.53614 - unsubscribe hm-rega.0.53615 - unsubscribe hm-rega.0.53616 - unsubscribe hm-rega.0.53617 - unsubscribe hm-rega.0.53707 - unsubscribe hm-rega.0.53752 - unsubscribe hm-rega.0.53754 - unsubscribe hm-rega.0.53767 - unsubscribe hm-rega.0.54127 - unsubscribe hm-rega.0.54323 - unsubscribe hm-rega.0.54349 - unsubscribe hm-rega.0.54438 - unsubscribe hm-rega.0.54485 - unsubscribe hm-rega.0.54544 - unsubscribe hm-rega.0.54597 - unsubscribe hm-rega.0.55028 - unsubscribe hm-rega.0.55029 - unsubscribe hm-rega.0.55030 - unsubscribe hm-rega.0.55031 - unsubscribe hm-rega.0.55032 - unsubscribe hm-rega.0.55033 - unsubscribe hm-rega.0.55034 - unsubscribe hm-rega.0.55805 - unsubscribe hm-rega.0.55904 - unsubscribe hm-rega.0.56743 - unsubscribe hm-rega.0.56744 - unsubscribe hm-rega.0.56758 - unsubscribe hm-rega.0.56759 - unsubscribe hm-rega.0.56760 - unsubscribe hm-rega.0.56761 - unsubscribe hm-rega.0.56786 - unsubscribe hm-rega.0.56787 - unsubscribe hm-rega.0.56800 - unsubscribe hm-rega.0.56801 - unsubscribe hm-rega.0.56814 - unsubscribe hm-rega.0.56815 - unsubscribe hm-rega.0.56816 - unsubscribe hm-rega.0.56817 - unsubscribe hm-rega.0.5764 - unsubscribe hm-rega.0.5765 - unsubscribe hm-rega.0.6817 - unsubscribe hm-rega.0.6818 - unsubscribe hm-rega.0.6915 - unsubscribe hm-rega.0.6916 - unsubscribe hm-rega.0.950 - unsubscribe hm-rega.0.alarms - unsubscribe hm-rega.0.maintenance - unsubscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34002600000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34002900000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003100000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003200000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003500000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.22003400000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.22003500000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000000000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000100000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000400000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000500000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000900000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34001100000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34001600000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34003300000 - unsubscribe wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34004000000 - unsubscribe switchbot-hub.0.EF0E1F1B54DA.deviceId - unsubscribe switchbot-hub.0.EF0E1F1B54DA.deviceType - unsubscribe switchbot-hub.0.EF0E1F1B54DA.hubDeviceId - unsubscribe switchbot-hub.0.EF0E1F1B54DA.humidity - unsubscribe switchbot-hub.0.EF0E1F1B54DA.temperature Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 > stateChange wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003100000 > stateChange wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003200000 > stateChange wolf-smartset.0.Benutzer.Heizung.030_Gemeinsame_Einstellungen.34003500000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.22003400000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.22003500000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000000000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000100000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000400000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000500000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34000900000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34001100000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34001600000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34003300000 > stateChange wolf-smartset.0.Benutzer.Heizung.058_Direkter_Heizkreis.34004000000 > stateChange hm-rega.0.45076 > stateChange hm-rega.0.10843 > stateChange hm-rega.0.10844 > stateChange hm-rega.0.11371 > stateChange hm-rega.0.1236 > stateChange hm-rega.0.13888 > stateChange hm-rega.0.13889 > stateChange hm-rega.0.14117 > stateChange hm-rega.0.14118 > stateChange hm-rega.0.14119 > stateChange hm-rega.0.14120 > stateChange hm-rega.0.14132 > stateChange hm-rega.0.14133 > stateChange hm-rega.0.14134 > stateChange hm-rega.0.14135 > stateChange hm-rega.0.14193 > stateChange hm-rega.0.14852 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 Detected an editable field that was not serializable. Please define SERIALIZABLE property as true on all editable custom fields. Proceeding with serialization. (anonym) @ :8081/adapter/javasc…cfbef968.chunk.js:2 > stateChange hm-rega.0.15028 > stateChange hm-rega.0.16463 > stateChange hm-rega.0.16464 > stateChange hm-rega.0.17121 > stateChange hm-rega.0.17636 > stateChange hm-rega.0.17637 > stateChange hm-rega.0.17732 > stateChange hm-rega.0.17733 > stateChange hm-rega.0.17846 > stateChange hm-rega.0.17847 > stateChange hm-rega.0.18082 > stateChange hm-rega.0.18083 > stateChange hm-rega.0.19606 > stateChange hm-rega.0.19607 > stateChange hm-rega.0.2099 > stateChange hm-rega.0.21455 > stateChange hm-rega.0.22419 > stateChange hm-rega.0.22556 > stateChange hm-rega.0.22557 > stateChange hm-rega.0.22680 > stateChange hm-rega.0.22681 > stateChange hm-rega.0.22709 > stateChange hm-rega.0.22972 > stateChange hm-rega.0.22973 > stateChange hm-rega.0.23411 > stateChange hm-rega.0.23412 > stateChange hm-rega.0.23504 > stateChange hm-rega.0.23505 > stateChange hm-rega.0.23751 > stateChange hm-rega.0.24503 > stateChange hm-rega.0.24969 > stateChange hm-rega.0.24970 > stateChange hm-rega.0.25006 > stateChange hm-rega.0.25183 > stateChange hm-rega.0.25357 > stateChange hm-rega.0.25430 > stateChange hm-rega.0.25431 > stateChange hm-rega.0.25727 > stateChange hm-rega.0.25922 > stateChange hm-rega.0.25923 > stateChange hm-rega.0.26018 > stateChange hm-rega.0.26019 > stateChange hm-rega.0.26221 > stateChange hm-rega.0.26222 > stateChange hm-rega.0.27729 > stateChange hm-rega.0.27730 > stateChange hm-rega.0.28752 > stateChange hm-rega.0.2883 > stateChange hm-rega.0.2884 > stateChange hm-rega.0.28940 > stateChange hm-rega.0.29367 > stateChange hm-rega.0.29499 > stateChange hm-rega.0.30172 > stateChange hm-rega.0.30173 > stateChange hm-rega.0.32442 > stateChange hm-rega.0.34273 > stateChange hm-rega.0.34274 > stateChange hm-rega.0.34288 > stateChange hm-rega.0.34289 > stateChange hm-rega.0.34290 > stateChange hm-rega.0.34291 > stateChange hm-rega.0.34292 > stateChange hm-rega.0.34293 > stateChange hm-rega.0.34294 > stateChange hm-rega.0.34295 > stateChange hm-rega.0.34296 > stateChange hm-rega.0.34297 > stateChange hm-rega.0.34298 > stateChange hm-rega.0.34299 > stateChange hm-rega.0.34300 > stateChange hm-rega.0.34301 > stateChange hm-rega.0.34302 > stateChange hm-rega.0.34303 > stateChange hm-rega.0.34304 > stateChange hm-rega.0.34305 > stateChange hm-rega.0.34306 > stateChange hm-rega.0.34307 > stateChange hm-rega.0.34308 > stateChange hm-rega.0.34309 > stateChange hm-rega.0.34310 > stateChange hm-rega.0.34311 > stateChange hm-rega.0.34312 > stateChange hm-rega.0.34313 > stateChange hm-rega.0.34314 > stateChange hm-rega.0.34315 > stateChange hm-rega.0.34316 > stateChange hm-rega.0.34317 > stateChange hm-rega.0.34318 > stateChange hm-rega.0.34320 > stateChange hm-rega.0.34322 > stateChange hm-rega.0.34354 > stateChange hm-rega.0.34539 > stateChange hm-rega.0.38117 > stateChange hm-rega.0.38118 > stateChange hm-rega.0.38266 > stateChange hm-rega.0.38267 > stateChange hm-rega.0.38857 > stateChange hm-rega.0.40509 > stateChange hm-rega.0.40510 > stateChange hm-rega.0.40511 > stateChange hm-rega.0.40512 > stateChange hm-rega.0.41047 > stateChange hm-rega.0.41207 > stateChange hm-rega.0.41208 > stateChange hm-rega.0.41248 > stateChange hm-rega.0.42068 > stateChange hm-rega.0.42101 > stateChange hm-rega.0.42102 > stateChange hm-rega.0.42103 > stateChange hm-rega.0.42104 > stateChange hm-rega.0.42105 > stateChange hm-rega.0.42106 > stateChange hm-rega.0.42107 > stateChange hm-rega.0.42108 > stateChange hm-rega.0.42110 > stateChange hm-rega.0.42125 > stateChange hm-rega.0.42183 > stateChange hm-rega.0.42319 > stateChange hm-rega.0.42320 instrument.ts:144 ChunkLoadError: Loading chunk 8943 failed. (timeout: http://192.168.2.176:8081/static/js/8943.4266642e.chunk.js) at t.f.j (jsonp chunk loading:27:18) at ensure chunk:6:25 at Array.reduce (<anonymous>) at t.e (ensure chunk:5:56) at App.jsx:82:36 at P (react.production.min.js:18:161) at Ei (react-dom.production.min.js:291:292) at ks (react-dom.production.min.js:280:389) at ys (react-dom.production.min.js:280:320) at vs (react-dom.production.min.js:280:180) at ss (react-dom.production.min.js:273:245) at Hl (react-dom.production.min.js:127:105) at react-dom.production.min.js:267:273 (anonym) @ instrument.ts:144Hilft das vieleicht bei der Fehlersuche?
-
Im ioBroker ist der Datenpunkt jetzt beschrieben - in der CCU nicht.
Dann wäre jetzt die Frage WIE Du das genau versucht hast umzusetzen, sprich wie sieht das Skript (Blockly) dazu aus, mit dem das ja scheinbar gemacht wurde.
Gruss
Thomas -
Ich habe jetzt nochmal iob diag laufen lassen
Skript v.2023-10-10 *** BASE SYSTEM *** Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : arm64 Systemuptime and Load: 15:24:42 up 17:10, 4 users, load average: 1.13, 1.02, 0.83 CPU threads: 4 *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** Time and Time Zones *** Local time: Thu 2023-11-02 15:24:42 CET Universal time: Thu 2023-11-02 14:24:42 UTC RTC time: n/a Time zone: Europe/Berlin (CET, +0100) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** Thomas /home/Thomas Thomas adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 2.9G 2.6G 1.2M 2.8G 5.3G Swap: 104M 0B 104M Total: 8.3G 2.9G 2.7G 7811 M total memory 2794 M used memory 2768 M active memory 2277 M inactive memory 2458 M free memory 132 M buffer memory 2549 M swap cache 99 M total swap 0 M used swap 99 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 782M 1.2M 781M 1% /run /dev/mmcblk0p2 ext4 29G 4.6G 23G 17% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 510M 61M 450M 12% /boot/firmware tmpfs tmpfs 782M 0 782M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Wed Nov 1 22:13:55 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:F5:7F:DE vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=dfee57ec-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE [Wed Nov 1 22:13:58 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Wed Nov 1 22:14:00 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems \(real ones only\): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime,commit=600 `-/boot/firmware /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 533M /var/ 201M /var/cache 195M /var/cache/apt 159M /var/lib 131M /var/lib/apt Archived and active journals take up 72.0M in the file system. /opt/iobroker/backups: 107M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 500M /opt/iobroker/iobroker-data/ 203M /opt/iobroker/iobroker-data/files 128M /opt/iobroker/iobroker-data/backup-objects 52M /opt/iobroker/iobroker-data/files/javascript.admin 34M /opt/iobroker/iobroker-data/files/javascript.admin/static The five largest files in iobroker-data are: 90M /opt/iobroker/iobroker-data/states.jsonl 77M /opt/iobroker/iobroker-data/objects.jsonl 21M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map 19M /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.2975a411.js.map 8.3M /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id': find: '/dev/serial/by-id/': No such file or directory *** NodeJS-Installation *** /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 nodejs: Installed: 18.18.2-1nodesource1 Candidate: 18.18.2-1nodesource1 Version table: *** 18.18.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 18.18.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.18.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.17.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.16.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.15.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.2-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.14.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.13.0+dfsg1-1 500 500 http://deb.debian.org/debian bookworm/main arm64 Packages 18.13.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.12.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.11.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.10.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.1-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.9.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.8.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.7.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.6.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.5.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.4.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.3.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.2.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.1.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages 18.0.0-1nodesource1 500 500 https://deb.nodesource.com/node_18.x nodistro/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected Errors in npm tree: *** ioBroker-Installation *** ioBroker Status No connection to databases possible ... Core adapters versions js-controller: 5.0.12 admin: 6.12.0 javascript: 7.1.4 Adapters from github: 3 Adapter State + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.backitup.0 : backitup : iobroker - enabled system.adapter.birthdays.0 : birthdays : iobroker - enabled system.adapter.botslab360.0 : botslab360 : iobroker - disabled + system.adapter.bring.0 : bring : iobroker - enabled system.adapter.chromecast.0 : chromecast : iobroker - disabled system.adapter.chromecast.1 : chromecast : iobroker - disabled system.adapter.cloud.0 : cloud : iobroker - disabled + system.adapter.discovery.0 : discovery : iobroker - enabled system.adapter.dwd.0 : dwd : iobroker - enabled system.adapter.flot.0 : flot : iobroker - disabled + system.adapter.history.0 : history : iobroker - enabled + system.adapter.hm-rega.0 : hm-rega : iobroker - enabled + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 system.adapter.ical.0 : ical : iobroker - enabled system.adapter.ical.1 : ical : iobroker - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : iobroker - disabled + system.adapter.info.0 : info : iobroker - enabled system.adapter.jarvis.0 : jarvis : iobroker - disabled + system.adapter.javascript.0 : javascript : iobroker - enabled system.adapter.modbus.0 : modbus : iobroker - disabled + system.adapter.modbus.1 : modbus : iobroker - enabled system.adapter.net-tools.0 : net-tools : iobroker - disabled system.adapter.netatmo.0 : netatmo : iobroker - disabled system.adapter.openweathermap.0 : openweathermap : iobroker - disabled system.adapter.ping.0 : ping : iobroker - disabled system.adapter.simple-api.0 : simple-api : iobroker - disabled, port: 8087, bind: ::, run as: admin + system.adapter.smartgarden.0 : smartgarden : iobroker - enabled system.adapter.sonos.0 : sonos : iobroker - disabled + system.adapter.switchbot-hub.0 : switchbot-hub : iobroker - enabled + system.adapter.tankerkoenig.0 : tankerkoenig : iobroker - enabled + system.adapter.trashschedule.0 : trashschedule : iobroker - enabled system.adapter.tvprogram.0 : tvprogram : iobroker - disabled system.adapter.tvspielfilm.0 : tvspielfilm : iobroker - enabled system.adapter.vis-canvas-gauges.0 : vis-canvas-gauges : iobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : iobroker - disabled system.adapter.vis-inventwo.0 : vis-inventwo : iobroker - disabled system.adapter.vis-justgage.0 : vis-justgage : iobroker - disabled system.adapter.vis-map.0 : vis-map : iobroker - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : iobroker - disabled system.adapter.vis-metro.0 : vis-metro : iobroker - disabled system.adapter.vis-players.0 : vis-players : iobroker - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : iobroker - disabled system.adapter.vis-weather.0 : vis-weather : iobroker - disabled system.adapter.vis.0 : vis : iobroker - disabled + system.adapter.vw-connect.0 : vw-connect : iobroker - enabled + system.adapter.vw-connect.1 : vw-connect : iobroker - enabled system.adapter.web.0 : web : iobroker - disabled, port: 8082, bind: 192.168.2.176, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : iobroker - enabled system.adapter.wifilight.0 : wifilight : iobroker - disabled + system.adapter.wolf-smartset.0 : wolf-smartset : iobroker - enabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.1 : hm-rpc : iobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : iobroker - enabled, port: 0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "admin" : 6.12.0 , installed 6.12.0 Adapter "backitup" : 2.8.7 , installed 2.8.7 Adapter "birthdays" : 2.3.1 , installed 2.3.1 Adapter "botslab360" : 0.0.2 , installed 0.0.2 Adapter "bring" : 1.8.4 , installed 1.8.4 Adapter "chromecast" : 3.0.3 , installed 3.0.3 Adapter "cloud" : 4.4.1 , installed 4.4.1 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 3.0.1 , installed 3.0.1 Adapter "hm-rega" : 3.0.47 , installed 3.0.47 Adapter "hm-rpc" : 1.15.19 , installed 1.15.19 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "info" : 2.0.0 , installed 2.0.0 Adapter "iot" : 1.14.5 , installed 1.14.5 Adapter "jarvis" : 3.1.8 , installed 3.1.2 [Updatable] Adapter "javascript" : 7.1.4 , installed 7.1.4 Controller "js-controller": 5.0.12 , installed 5.0.12 Adapter "modbus" : 5.0.11 , installed 5.0.11 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "netatmo" : 3.1.0 , installed 3.1.0 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "ping" : 1.6.2 , installed 1.6.2 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "smartgarden" : 2.0.0 , installed 2.0.0 Adapter "socketio" : 6.5.5 , installed 6.5.2 [Updatable] Adapter "sonos" : 2.3.1 , installed 2.3.1 Adapter "tankerkoenig" : 3.3.7 , installed 3.3.7 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "tvprogram" : 1.1.2 , installed 1.1.2 Adapter "tvspielfilm" : 2.0.5 , installed 2.0.5 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-canvas-gauges": 1.0.1, installed 1.0.1 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-inventwo" : 3.3.3 , installed 3.3.3 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.4, installed 1.7.2 [Updatable] Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-players" : 0.1.6 , installed 0.1.6 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "vw-connect" : 0.0.67 , installed 0.2.0 Adapter "web" : 6.1.2 , installed 6.1.0 [Updatable] Adapter "whatsapp-cmb" : 0.2.3 , installed 0.2.3 Adapter "wifilight" : 1.1.4 , installed 1.1.4 Adapter "wolf-smartset": 1.1.1 , installed 1.1.1 Adapter "ws" : 2.5.5 , installed 2.5.3 [Updatable] Objects and States Please stand by - This may take a while Objects: 57778 States: 51236 *** OS-Repositories and Updates *** Hit:1 http://archive.raspberrypi.com/debian bookworm InRelease Hit:2 https://deb.nodesource.com/node_18.x nodistro InRelease Hit:3 http://deb.debian.org/debian bookworm InRelease Hit:4 http://deb.debian.org/debian-security bookworm-security InRelease Hit:5 http://deb.debian.org/debian bookworm-updates InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.2.176:2010 0.0.0.0:* LISTEN 1001 307455 39627/io.hm-rpc.1 tcp 0 0 192.168.2.176:2001 0.0.0.0:* LISTEN 1001 306324 39533/io.hm-rpc.2 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 246518 31672/iobroker.js-c tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 248002 31672/iobroker.js-c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 16506 683/sshd: /usr/sbin tcp6 0 0 :::22 :::* LISTEN 0 16508 683/sshd: /usr/sbin tcp6 0 0 :::8081 :::* LISTEN 1001 247320 31692/io.admin.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 104 13828 531/avahi-daemon: r udp 0 0 0.0.0.0:34964 0.0.0.0:* 104 13830 531/avahi-daemon: r udp6 0 0 fe80::8e9e:365c:6cc:546 :::* 0 262457 595/NetworkManager udp6 0 0 :::33666 :::* 104 13831 531/avahi-daemon: r udp6 0 0 :::5353 :::* 104 13829 531/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-11-02 15:34:20.009 - info: javascript.0 (39160) script.js.Solar-Anlage.Einspeisung_Netzbezug: -0.46 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.aktuelle_Sonnenleistung, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650039,"q":0,"c":"script.js.Solar-Anlage.Aktuelle_Sonnenenergie","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698423250031} 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.019 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1698935650002,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698451060050} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Einspeisung_Netzbezug, timerId=undefined) => {"val":-0.46,"ack":true,"ts":1698935650034,"q":0,"c":"script.js.Solar-Anlage.Einspeisung_Netzbezug","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698453580039} 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Sonnenleistung: 0 2023-11-02 15:34:20.020 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie-Aufladung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Batterie-Entladung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz-Einspeisung: 0 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Netz-Bezug: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Zwischenwert 2: -0.46 2023-11-02 15:34:20.021 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Hausverbrauch 3: 0.46 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: Hausverbrauch 7: 0.46 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: setForeignState(id=0_userdata.0.Solar-Anlage.Hausverbrauch, state={"val":0.46,"ack":true,"ts":1698935660022,"q":0,"from":"system.adapter.javascript.0","lc":1698453590030,"c":"script.js.Solar-Anlage.Hausverbrauch"}) 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: getState(id=0_userdata.0.Solar-Anlage.Hausverbrauch, timerId=undefined) => {"val":0.46,"ack":true,"ts":1698935650024,"q":0,"c":"script.js.Solar-Anlage.Hausverbrauch","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1698453590030} 2023-11-02 15:34:20.022 - info: javascript.0 (39160) script.js.Solar-Anlage.Hausverbrauch: "echter Hausverbrauch"0.46 2023-11-02 15:34:20.035 - info: javascript.0 (39160) script.js.Solar-Anlage.PV_Leistung_Aktuell: 0 2023-11-02 15:34:20.041 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: getState(id=modbus.0.holdingRegisters.62836_Batterieleistung, timerId=undefined) => {"val":0,"ack":true,"ts":1698451050825,"q":0,"from":"system.adapter.modbus.0","user":"system.user.admin","lc":1698451050825} 2023-11-02 15:34:20.042 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: setForeignState(id=0_userdata.0.Solar-Anlage.Batterieleistung_in_kW, state={"val":0,"ack":true,"ts":1698935660042,"q":0,"from":"system.adapter.javascript.0","lc":1698451060050,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW"}) 2023-11-02 15:34:20.042 - info: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: getState(id=0_userdata.0.Wechselrichter.Batterie_leistung_in_kW, timerId=undefined) => {"val":0,"ack":true,"ts":1692188960003,"q":0,"c":"script.js.Solar-Anlage.Skript_Batterieleistung_in_kW","from":"system.adapter.javascript.0","user":"system.user.admin","lc":1692185360002} 2023-11-02 15:34:20.042 - warn: javascript.0 (39160) script.js.Solar-Anlage.Skript_Batterieleistung_in_kW: 0 2023-11-02 15:34:20.272 - info: tvspielfilm.0 (40340) Terminated (NO_ERROR): Without reason======================= SUMMARY ======================= v.2023-10-10 Static hostname: iobroker Icon name: computer Operating System: Debian GNU/Linux 12 (bookworm) Kernel: Linux 6.1.0-rpi4-rpi-v8 Architecture: arm64 Installation: native Kernel: aarch64 Userland: arm64 Timezone: Europe/Berlin (CET, +0100) User-ID: 1000 X-Server: false Boot Target: multi-user.target Pending OS-Updates: 0 Pending iob updates: 5 Nodejs-Installation: /usr/bin/nodejs v18.18.2 /usr/bin/node v18.18.2 /usr/bin/npm 9.8.1 /usr/bin/npx 9.8.1 /usr/bin/corepack 0.19.0 Recommended versions are nodejs 18.18.2 and npm 9.8.1 Your nodejs installation is correct MEMORY: total used free shared buff/cache available Mem: 8.2G 2.1G 3.4G 1.2M 2.8G 6.1G Swap: 104M 0B 104M Total: 8.3G 2.1G 3.5G Active iob-Instances: 20 Active repo(s): stable ioBroker Core: js-controller 5.0.12 admin 6.12.0 ioBroker Status: iobroker is running on this host. Objects type: jsonl States type: jsonl Status admin and web instance: + system.adapter.admin.0 : admin : iobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.web.0 : web : iobroker - disabled, port: 8082, bind: 192.168.2.176, run as: admin Objects: 57778 States: 51236 Size of iob-Database: 84M /opt/iobroker/iobroker-data/objects.jsonl 93M /opt/iobroker/iobroker-data/states.jsonl =================== END OF SUMMARY ====================Die Adapter, für die ein Update vorliegt, sind im Moment nicht aktiviert.
@thomas123-0
Ich hänge mich mal ran hier. Das Problem hatte ich auch seit Umstellung auf controller >5. Das Problem sind die vielen objects und states. Bei mir sind es nur je ca. 30000 (bei dir >50000!). Das pending beim rega-Adapter hat auch damit zu tun. Der Adapter möchte sein script ausführen - muß aber auf die objects/states warten. Das Problem mit dem Speichern von Blockly kommt auch davon. Wenn ein Wert aus den Objekten genommen wird, habe ich immer gewartet bis der Inhalt sichtbar war und habe dann erst das Auswahl-Fenster mit OK geschlossen. Beim Speichern des Blockly - geduld - warten bis die Instanz wieder da ist - dann wird auch gespeichert.
Meine Probleme habe ich mit Installation von Redis-Server und der Umstellung von object und states auf redis gelöst.
Das sollten sich die controller -Entwickler mal genauer anschauen.
Meine controller CPU-Belastung ist so von manchmal mehr als 100%(im Schnitt meist mehr als 60%) auf jetzt 0,33% gesunken.Wer Fehler findet, darf sie behalten!
-
@thomas123-0
Ich hänge mich mal ran hier. Das Problem hatte ich auch seit Umstellung auf controller >5. Das Problem sind die vielen objects und states. Bei mir sind es nur je ca. 30000 (bei dir >50000!). Das pending beim rega-Adapter hat auch damit zu tun. Der Adapter möchte sein script ausführen - muß aber auf die objects/states warten. Das Problem mit dem Speichern von Blockly kommt auch davon. Wenn ein Wert aus den Objekten genommen wird, habe ich immer gewartet bis der Inhalt sichtbar war und habe dann erst das Auswahl-Fenster mit OK geschlossen. Beim Speichern des Blockly - geduld - warten bis die Instanz wieder da ist - dann wird auch gespeichert.
Meine Probleme habe ich mit Installation von Redis-Server und der Umstellung von object und states auf redis gelöst.
Das sollten sich die controller -Entwickler mal genauer anschauen.
Meine controller CPU-Belastung ist so von manchmal mehr als 100%(im Schnitt meist mehr als 60%) auf jetzt 0,33% gesunken.Danke erstmal für den Tip mit dem Warten, bis die Werte erscheinen. Das hat schon mal insofern geholfen, dass er nicht "abschmiert". Aber es dauert ewig, bis die Werte erscheinen, und man dann endlich ok drücken kann.
Er schreibt auch brav die Werte in die Systemvriablen der hm-rega, aber in der CCU kommen die geänderten Werte nicht an...Von Redis hab ich bisher nix gehört. Hast Du einen Link zu einer "idiotensicheren" Beschreibung, wie und wo es installiert wird? Was ich bisher dazu gefunden habe, verwirrt mich sehr.
Gruss
Thomas -
Danke erstmal für den Tip mit dem Warten, bis die Werte erscheinen. Das hat schon mal insofern geholfen, dass er nicht "abschmiert". Aber es dauert ewig, bis die Werte erscheinen, und man dann endlich ok drücken kann.
Er schreibt auch brav die Werte in die Systemvriablen der hm-rega, aber in der CCU kommen die geänderten Werte nicht an...Von Redis hab ich bisher nix gehört. Hast Du einen Link zu einer "idiotensicheren" Beschreibung, wie und wo es installiert wird? Was ich bisher dazu gefunden habe, verwirrt mich sehr.
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Er schreibt auch brav die Werte in die Systemvriablen der hm-rega, aber in der CCU kommen die geänderten Werte nicht an...
wie? genau!
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Er schreibt auch brav die Werte in die Systemvriablen der hm-rega, aber in der CCU kommen die geänderten Werte nicht an...
wie? genau!
-
@homoran
das Script läuft durch, und die Daten werden im ioBroker im Adapter hm-rega geschrieben. Rufe ich die CCU auf, sind da in den Systemvariablen noch die alten Daten, und nicht die vom Script geänderten@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
die Daten werden im ioBroker im Adapter hm-rega geschrieben.
wie schre7bt das script?
-
@thomas123-0 sagte in oft Timeout und langsame Verbindung erkannt:
Eigentlich ein ganz einfaches...
ist es das???
dann ändere mal den Block auf einen steuere Block
kein Support per PN! - Fragen im Forum stellen - es gibt fast nichts, was nicht auch für andere interessant ist.
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash -
-
Danke erstmal für den Tip mit dem Warten, bis die Werte erscheinen. Das hat schon mal insofern geholfen, dass er nicht "abschmiert". Aber es dauert ewig, bis die Werte erscheinen, und man dann endlich ok drücken kann.
Er schreibt auch brav die Werte in die Systemvriablen der hm-rega, aber in der CCU kommen die geänderten Werte nicht an...Von Redis hab ich bisher nix gehört. Hast Du einen Link zu einer "idiotensicheren" Beschreibung, wie und wo es installiert wird? Was ich bisher dazu gefunden habe, verwirrt mich sehr.
@thomas123-0
Einen idiotensicheren Link wirst du nicht finden. Ich hab auch nur hier im Forum die Schritte gesucht und so ausgeführt. Wird ja oft genug beschrieben. Bei mir gab's auch noch ein Problem mit den objects - da stand noch der alte Host drin und wurde nicht migriert. Das beste ist ein ordentliches Backup und viel lesen. Ja das Thema ist anspruchsvoll aber machbar. Und wie schon gesagt - es bringt auch etwas an Leistung. Wichtig ist Installation des redis(der ist nicht überall dabei) - dann das der auch als Systemdienst läuft - dann die Migration und auch die Hinweise beachten zwecks Spracheinstellung hier. Das so in groben Zügen.
864
Online32.5k
Benutzer81.8k
Themen1.3m
Beiträge