Neuer Blogbeitrag: Monatsrückblick - Dezember 2025 🎄

[arteck]

@snert sagte in Sonoff zbbridge pro mit Tastmota und ZigBee-Adapter:

at /opt/iobroker/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:299:23

da ist ein Fehler im converter... installier mal den adapter von GIT
und mach Debug AUS.. brauch ich nicht

[Ralla66]

@snert

diese Seite wäre aus meiner Sicht richtig :
demnach fehlt:
rule1 1 TCPStart 8888
also die Ausführung der Rule beim booten aktivieren

sollte dann für Pro ESP32 sein:
Download
Ota:

	http://ota.tasmota.com/tasmota32/release/tasmota32-zbbrdgpro.bin

Pro als Bridge betreiben, Template

{"NAME":"TCP ZBBridge Pro","GPIO":[0,0,576,0,480,0,0,0,0,1,1,5792,0,0,0,5472,0,320,5793,5504,0,640,608,32,0,0,0,0,0,1,0,0,0,0,0,0],"FLAG":0,"BASE":1

Zigbee Commands

TCP Commands

[Snert]

@arteck Habe die Version 1.8.24 über GIT geladen. Ergebnis ist erstmal das selbe, aber vll. hilft es trozdem weiter.

2023-10-26 22:17:19.749 - info: host.smarthome-VM instance system.adapter.zigbee.0 started with pid 874855
2023-10-26 22:17:20.240 - info: admin.0 (649296) ==> Connected system.user.admin from ::ffff:192.168.178.89
2023-10-26 22:17:22.388 - info: zigbee.0 (874855) starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee) in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-10-26 22:17:22.477 - error: zigbee.0 (874855) Serial port not selected! Go to settings page.
2023-10-26 22:17:22.595 - info: zigbee.0 (874855) delete old Backup files. keep only last 10
2023-10-26 22:17:22.596 - info: zigbee.0 (874855) Starting Zigbee npm ...
2023-10-26 22:17:23.319 - error: zigbee.0 (874855) Starting zigbee-herdsman problem : "No path provided and failed to auto detect path"
2023-10-26 22:17:23.320 - error: zigbee.0 (874855) Failed to start Zigbee
2023-10-26 22:17:23.320 - error: zigbee.0 (874855) Error herdsman start
2023-10-26 22:17:23.344 - info: zigbee.0 (874855) Installed Version: ioBroker/ioBroker.zigbee
2023-10-26 22:17:33.322 - info: zigbee.0 (874855) Try to reconnect. 1 attempts left
2023-10-26 22:17:33.324 - info: zigbee.0 (874855) Starting Zigbee npm ...
2023-10-26 22:17:33.368 - info: zigbee.0 (874855) Installed Version: ioBroker/ioBroker.zigbee
2023-10-26 22:17:33.733 - error: zigbee.0 (874855) Starting zigbee-herdsman problem : "No path provided and failed to auto detect path"
2023-10-26 22:17:33.734 - error: zigbee.0 (874855) Failed to start Zigbee
2023-10-26 22:17:33.735 - error: zigbee.0 (874855) Error herdsman start
2023-10-26 22:18:19.826 - info: host.smarthome-VM stopInstance system.adapter.zigbee.0 (force=false, process=true)
2023-10-26 22:18:19.893 - info: zigbee.0 (874855) Got terminate signal TERMINATE_YOURSELF
2023-10-26 22:18:19.904 - info: host.smarthome-VM stopInstance system.adapter.zigbee.0 send kill signal
2023-10-26 22:18:19.894 - info: zigbee.0 (874855) cleaned everything up...
2023-10-26 22:18:19.897 - info: zigbee.0 (874855) Zigbee: disabling joining new devices.
2023-10-26 22:18:19.925 - warn: zigbee.0 (874855) Failed to stop zigbee during startup
2023-10-26 22:18:19.932 - info: zigbee.0 (874855) terminating
2023-10-26 22:18:19.933 - info: zigbee.0 (874855) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-10-26 22:18:20.094 - info: admin.0 (649296) <== Disconnect system.user.admin from ::ffff:192.168.178.89
2023-10-26 22:18:20.540 - info: host.smarthome-VM instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-10-26 22:18:22.995 - info: host.smarthome-VM instance system.adapter.zigbee.0 started with pid 874887
2023-10-26 22:18:26.421 - info: zigbee.0 (874887) starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee) in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-10-26 22:18:26.504 - info: zigbee.0 (874887) delete old Backup files. keep only last 10
2023-10-26 22:18:26.506 - info: zigbee.0 (874887) Starting Zigbee npm ...
2023-10-26 22:18:26.914 - info: zigbee.0 (874887) Installed Version: ioBroker/ioBroker.zigbee
2023-10-26 22:18:36.915 - error: zigbee.0 (874887) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-10-26 22:18:36.916 - error: zigbee.0 (874887) unhandled promise rejection: Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:18:37.058 - error: zigbee.0 (874887) Error: Reset error: Error: {"sequence":-1} after 10000ms
at /opt/iobroker/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:299:23
at Queue.executeNext (/opt/iobroker/node_modules/zigbee-herdsman/src/utils/queue.ts:32:32)
2023-10-26 22:18:37.059 - error: zigbee.0 (874887) Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:18:37.164 - info: zigbee.0 (874887) cleaned everything up...
2023-10-26 22:18:37.172 - info: zigbee.0 (874887) Zigbee: disabling joining new devices.
2023-10-26 22:18:37.443 - warn: zigbee.0 (874887) Failed to stop zigbee during startup
2023-10-26 22:18:37.444 - info: zigbee.0 (874887) terminating
2023-10-26 22:18:37.445 - warn: zigbee.0 (874887) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-10-26 22:18:38.095 - error: host.smarthome-VM Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-10-26 22:18:38.095 - error: host.smarthome-VM Caught by controller[0]: Error: Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:18:38.096 - error: host.smarthome-VM Caught by controller[0]: at /opt/iobroker/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:299:23
2023-10-26 22:18:38.096 - error: host.smarthome-VM Caught by controller[0]: at Queue.executeNext (/opt/iobroker/node_modules/zigbee-herdsman/src/utils/queue.ts:32:32)
2023-10-26 22:18:38.096 - error: host.smarthome-VM instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-10-26 22:18:38.096 - info: host.smarthome-VM Restart adapter system.adapter.zigbee.0 because enabled
2023-10-26 22:19:08.160 - info: host.smarthome-VM instance system.adapter.zigbee.0 started with pid 874904
2023-10-26 22:19:11.250 - info: zigbee.0 (874904) starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee) in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-10-26 22:19:11.312 - info: zigbee.0 (874904) delete old Backup files. keep only last 10
2023-10-26 22:19:11.313 - info: zigbee.0 (874904) Starting Zigbee npm ...
2023-10-26 22:19:11.675 - info: zigbee.0 (874904) Installed Version: ioBroker/ioBroker.zigbee
2023-10-26 22:19:21.672 - error: zigbee.0 (874904) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-10-26 22:19:21.674 - error: zigbee.0 (874904) unhandled promise rejection: Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:19:21.746 - error: zigbee.0 (874904) Error: Reset error: Error: {"sequence":-1} after 10000ms
at /opt/iobroker/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:299:23
at Queue.executeNext (/opt/iobroker/node_modules/zigbee-herdsman/src/utils/queue.ts:32:32)
2023-10-26 22:19:21.747 - error: zigbee.0 (874904) Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:19:21.772 - info: zigbee.0 (874904) cleaned everything up...
2023-10-26 22:19:21.775 - info: zigbee.0 (874904) Zigbee: disabling joining new devices.
2023-10-26 22:19:21.980 - warn: zigbee.0 (874904) Failed to stop zigbee during startup
2023-10-26 22:19:21.981 - info: zigbee.0 (874904) terminating
2023-10-26 22:19:21.982 - warn: zigbee.0 (874904) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-10-26 22:19:22.603 - error: host.smarthome-VM Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-10-26 22:19:22.603 - error: host.smarthome-VM Caught by controller[1]: Error: Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:19:22.603 - error: host.smarthome-VM Caught by controller[1]: at /opt/iobroker/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:299:23
2023-10-26 22:19:22.603 - error: host.smarthome-VM Caught by controller[1]: at Queue.executeNext (/opt/iobroker/node_modules/zigbee-herdsman/src/utils/queue.ts:32:32)
2023-10-26 22:19:22.604 - error: host.smarthome-VM instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-10-26 22:19:22.604 - info: host.smarthome-VM Restart adapter system.adapter.zigbee.0 because enabled
2023-10-26 22:19:52.688 - info: host.smarthome-VM instance system.adapter.zigbee.0 started with pid 874919
2023-10-26 22:19:55.225 - info: zigbee.0 (874919) starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee) in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.19.0, js-controller: 4.0.24
2023-10-26 22:19:55.282 - info: zigbee.0 (874919) delete old Backup files. keep only last 10
2023-10-26 22:19:55.283 - info: zigbee.0 (874919) Starting Zigbee npm ...
2023-10-26 22:19:55.596 - info: zigbee.0 (874919) Installed Version: ioBroker/ioBroker.zigbee
2023-10-26 22:20:00.074 - info: host.smarthome-VM instance system.adapter.netatmo-crawler.0 started with pid 874934
2023-10-26 22:20:05.596 - error: zigbee.0 (874919) Unhandled promise rejection. This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch().
2023-10-26 22:20:05.655 - info: host.smarthome-VM instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-10-26 22:20:05.598 - error: zigbee.0 (874919) unhandled promise rejection: Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:20:05.736 - error: zigbee.0 (874919) Error: Reset error: Error: {"sequence":-1} after 10000ms
at /opt/iobroker/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:299:23
at Queue.executeNext (/opt/iobroker/node_modules/zigbee-herdsman/src/utils/queue.ts:32:32)
2023-10-26 22:20:05.736 - error: zigbee.0 (874919) Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:20:05.795 - info: zigbee.0 (874919) cleaned everything up...
2023-10-26 22:20:05.809 - info: zigbee.0 (874919) Zigbee: disabling joining new devices.
2023-10-26 22:20:05.939 - warn: zigbee.0 (874919) Failed to stop zigbee during startup
2023-10-26 22:20:05.940 - info: zigbee.0 (874919) terminating
2023-10-26 22:20:05.941 - warn: zigbee.0 (874919) Terminated (UNCAUGHT_EXCEPTION): Without reason
2023-10-26 22:20:06.603 - error: host.smarthome-VM Caught by controller[0]: This error originated either by throwing inside of an async function without a catch block, or by rejecting a promise which was not handled with .catch(). The promise rejected with the reason:
2023-10-26 22:20:06.604 - error: host.smarthome-VM Caught by controller[0]: Error: Reset error: Error: {"sequence":-1} after 10000ms
2023-10-26 22:20:06.604 - error: host.smarthome-VM Caught by controller[0]: at /opt/iobroker/node_modules/zigbee-herdsman/src/adapter/ezsp/driver/uart.ts:299:23
2023-10-26 22:20:06.604 - error: host.smarthome-VM Caught by controller[0]: at Queue.executeNext (/opt/iobroker/node_modules/zigbee-herdsman/src/utils/queue.ts:32:32)
2023-10-26 22:20:06.604 - error: host.smarthome-VM instance system.adapter.zigbee.0 terminated with code 6 (UNCAUGHT_EXCEPTION)
2023-10-26 22:20:06.605 - info: host.smarthome-VM Restart adapter system.adapter.zigbee.0 because enabled
2023-10-26 22:20:06.605 - warn: host.smarthome-VM Do not restart adapter system.adapter.zigbee.0 because restart loop detected

@Ralla66 auch mit angepastem Template und der Rule, selbes Ergebnis. Morgen kann ich gerne nochmal mich an die andere Anleitung halten.

[Ralla66]

@snert

auf welcher Maschine betreibst du den ZigBee-Adapter ?

[Snert]

@ralla66 In einer Windows Server HyperV VM mit Ubuntu. Die VM hat 16GB Ram und die Host CPU ist ein Intel Core i5-4590 CPU @ 3.30GHz.

[arteck]

@snert alder was ein konstrukt

suchmal nach udev... und check das erstmal..scheint als ob der ezsp Treiber nicht geladen wird

[Snert]

@arteck Da noch einiges mehr auf dem Server an VMs läuft, hatte ich mich dafür entschieden den ioBroker hier zu installieren.

Bezüglich udev, ist das nicht nur erforderlich wenn ich einen USB Stick verwenden würde?

@Ralla66 ich habe jetzt auch per OTA geupdated, ohne weitere Verbesserungen.

[arteck]

@snert sagte in Sonoff zbbridge pro mit Tastmota und ZigBee-Adapter:

Bezüglich udev, ist das nicht nur erforderlich wenn ich einen USB Stick verwenden würde?

ja hast ja recht.. du machst es per ip..

hmm..kein Plan.. irgendwas ist nicht so konfiguriert wie es soll.. auf der bridge

[Ralla66]

@snert

du hast diese rule in der Tasmota Console ausgeführt und neu gebootet ?

backlog rule1 on system#boot do TCPStart 8888 endon ; rule1 1 ; TCPStart 8888

In der Console kann mit

TCPBaudRate

die eingestellte Baudrate geprüft werden. Passt diese ?

Zeige mal den Consolentext, dort steht ja ob die Bridge verbunden ist.

[Snert]

@ralla66 Ja, alles so durchgeführt.
Baudrate sollte so auch passen.

RESULT = {"TCPBaudrate":115200}

Könnt ihr mir sagen was in der Tasmota Console bei korrekter Verbindung angezeigt wird?

Wenn das Kind heute Abend im Bett ist, werde ich alles nochmal in Ruhe neu anfangen. Gibts ne Möglichkeit alles auf 0 zu setzen (auch den CC2652) oder geschieht das automatisch mit dem neuen flashen von Tasmota?

Edit:

00:00:00.002 HDW: ESP32-D0WD-V3 v3.0 
00:00:00.067 UFS: FlashFS mounted with 908 kB free
00:00:00.081 CFG: Loaded from File, Count 59
00:00:00.091 QPC: Count 1
00:00:00.097 I2C: Bus1 using GPIO26(SCL) and GPIO25(SDA)
00:00:00.162 BRY: Berry initialized, RAM used=3902 bytes
00:00:00.174 TFS: File '.drvset003' not found
00:00:00.183 Project tasmota - Tasmota Version 13.2.0(zbbrdgpro)-2_0_14(2023-10-19T09:04:58)
00:00:00.667 WIF: Connecting to AP1 FRITZ!Box 7590 2.4 Channel 1 BSSId 2C:3A:FD:FB:F0:6E in mode 11n as tasmota-6063A4-0932...
00:00:02.398 WIF: Connected
00:00:02.656 HTP: Web server active on tasmota-6063A4-0932 with IP address 192.168.178.86
10:03:13.662 RSL: INFO1 = {"Info1":{"Module":"Sonoff Zigbee Pro","Version":"13.2.0(zbbrdgpro)","FallbackTopic":"cmnd/DVES_6063A4_fb/","GroupTopic":"cmnd/tasmotas/"}}
10:03:13.677 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-6063A4-0932","IPAddress":"192.168.178.86","IP6Global":"","IP6Local":"fe80::4222:d8ff:fe60:63a4"}}
10:03:13.691 RSL: INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":31}}
10:03:13.716 RUL: SYSTEM#BOOT performs "TCPStart 8888"
10:03:13.718 TCP: Starting TCP server on port 8888
10:03:13.722 RSL: RESULT = {"TCPStart":"Done"}
10:03:16.964 QPC: Reset
10:03:17.891 RSL: STATE = {"Time":"2023-10-27T10:03:17","Uptime":"0T00:00:08","UptimeSec":8,"Heap":164,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-37,"LinkCount":1,"Downtime":"0T00:00:03"}}00:00:02.398 WIF: Connected
00:00:02.656 HTP: Web server active on tasmota-6063A4-0932 with IP address 192.168.178.86
10:03:13.662 RSL: INFO1 = {"Info1":{"Module":"Sonoff Zigbee Pro","Version":"13.2.0(zbbrdgpro)","FallbackTopic":"cmnd/DVES_6063A4_fb/","GroupTopic":"cmnd/tasmotas/"}}
10:03:13.677 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-6063A4-0932","IPAddress":"192.168.178.86","IP6Global":"","IP6Local":"fe80::4222:d8ff:fe60:63a4"}}
10:03:13.691 RSL: INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":31}}
10:03:13.716 RUL: SYSTEM#BOOT performs "TCPStart 8888"
10:03:13.718 TCP: Starting TCP server on port 8888
10:03:13.722 RSL: RESULT = {"TCPStart":"Done"}
10:03:16.964 QPC: Reset
10:03:17.891 RSL: STATE = {"Time":"2023-10-27T10:03:17","Uptime":"0T00:00:08","UptimeSec":8,"Heap":164,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-37,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:03:28.123 TCP: Got connection from 192.168.178.36
10:04:12.032 TCP: Got connection from 192.168.178.36
10:08:17.901 RSL: STATE = {"Time":"2023-10-27T10:08:17","Uptime":"0T00:05:08","UptimeSec":308,"Heap":160,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-38,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:13:08.930 APP: Serial logging disabled
10:13:17.936 RSL: STATE = {"Time":"2023-10-27T10:13:17","Uptime":"0T00:10:08","UptimeSec":608,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:18:17.912 RSL: STATE = {"Time":"2023-10-27T10:18:17","Uptime":"0T00:15:08","UptimeSec":908,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-35,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:23:17.896 RSL: STATE = {"Time":"2023-10-27T10:23:17","Uptime":"0T00:20:08","UptimeSec":1208,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:28:17.912 RSL: STATE = {"Time":"2023-10-27T10:28:17","Uptime":"0T00:25:08","UptimeSec":1508,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:33:17.889 RSL: STATE = {"Time":"2023-10-27T10:33:17","Uptime":"0T00:30:08","UptimeSec":1808,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:38:17.927 RSL: STATE = {"Time":"2023-10-27T10:38:17","Uptime":"0T00:35:08","UptimeSec":2108,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-34,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:43:17.922 RSL: STATE = {"Time":"2023-10-27T10:43:17","Uptime":"0T00:40:08","UptimeSec":2408,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-37,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:48:17.893 RSL: STATE = {"Time":"2023-10-27T10:48:17","Uptime":"0T00:45:08","UptimeSec":2708,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:53:17.889 RSL: STATE = {"Time":"2023-10-27T10:53:17","Uptime":"0T00:50:08","UptimeSec":3008,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-37,"LinkCount":1,"Downtime":"0T00:00:03"}}
10:58:17.916 RSL: STATE = {"Time":"2023-10-27T10:58:17","Uptime":"0T00:55:08","UptimeSec":3308,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-37,"LinkCount":1,"Downtime":"0T00:00:03"}}
11:03:17.910 RSL: STATE = {"Time":"2023-10-27T11:03:17","Uptime":"0T01:00:08","UptimeSec":3608,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-35,"LinkCount":1,"Downtime":"0T00:00:03"}}
11:08:17.903 RSL: STATE = {"Time":"2023-10-27T11:08:17","Uptime":"0T01:05:08","UptimeSec":3908,"Heap":163,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:03"}}
11:11:45.034 CMD: TCPBaudRate
11:11:45.039 RSL: RESULT = {"TCPBaudrate":115200}
11:13:17.921 RSL: STATE = {"Time":"2023-10-27T11:13:17","Uptime":"0T01:10:08","UptimeSec":4208,"Heap":160,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-35,"LinkCount":1,"Downtime":"0T00:00:03"}}
11:18:17.925 RSL: STATE = {"Time":"2023-10-27T11:18:17","Uptime":"0T01:15:08","UptimeSec":4508,"Heap":160,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-36,"LinkCount":1,"Downtime":"0T00:00:03"}}
11:21:46.024 CMD: TCPBaudRate
11:21:46.029 RSL: RESULT = {"TCPBaudrate":115200}

[Ralla66]

@snert

10:03:13.716 RUL: SYSTEM#BOOT performs "TCPStart 8888"
10:03:13.718 TCP: Starting TCP server on port 8888
10:03:13.722 RSL: RESULT = {"TCPStart":"Done"}

TCPStart":"Done zeigt an das der TCP Server aktiv ist.

Wenn eine Verbindung besteht wird die IP des Client in der Console angezeigt.
Sollte dies sein :

10:03:28.123 TCP: Got connection from 192.168.178.36

soweit in Ordnung

was hängt denn an GPIO 26 und 25 ?

default ESP32 ist ja
GPIO 21 (SDA)
GPIO 22 (SCL)

[Snert]

@ralla66

Die eine LED blinkt blau bei WLAN und die andere blinkt grün bei Zigbee Verbindung.

[Snert]

@ralla66 Ich habe jetzt alles nochmal von Grund auf neu gemacht.
Alles beim alten :-(

Was mir aufgefallen ist, ich erhalte beim flashen vom cc2652 NICHT diese Meldung:

22:01:25.294 RSL: RESULT = {"ZbState":{"Status":3,"Message":"Configured, starting coordinator"}}
22:01:31.293 RSL: RESULT = {"ZbState":{"Status":40,"NewState":9,"Message":"Started as coordinator"}}
22:01:31.944 RSL: RESULT = {"ZbState":{"Status":0,"Message":"Started"}}

Wie in der Anleitung von notenoughtech beschrieben.
Kann ich irgendwie prüfen welche Version auf dem Chip ist, oder was sein Status ist?
Das flashen ansonsten wurde jeweils mit ok quitiert.

[Ralla66]

@snert

habe das System nicht mit dem CC2652, kann nur noch theoretisch helfen.

hast du nach dem Ausführen dies in der Console gesehen ?

FLH: Starting verification of HEX file und
FLH: Flashing completed: OK

[Snert]

@ralla66 Ja, beide Meldungen sind gekommen.
Ich habe auch schon vor lauter Verzweiflung mit den "Typen" im ioBroker Adapter gespielt.
Ebenso auch per Webinstaller den Develop Status verwendet und auch das aktuellste hex file "SonoffZBPro_coord_20230507.hex" genutzt.
Alles lief immer ohne Probleme durch. Einzig die oben erwähnte Meldung erhalte ich nicht.
Jetzt kann ich noch mit den Templates spielen, aber ob das was ändert?

[Ralla66]

@snert

die 3 Status Meldungen scheinen nur nach dem Neustart einmalig in der Console zu erscheinen.
Boote mal neu und schau was im Log steht.

[Ralla66]

@ralla66

Moin, habe das mal auf einen ESP geflasht.

Was geschieht denn wenn du bei Berry -> cc.flash() ausführst ?
Console zeigt was ?

[Snert]

@ralla66 Wenn ich den Auto-configuration auf Sonoff ZBPro stelle, erhalte ich nach einem Neustart auch die Meldungen.

00:00:00.003 HDW: ESP32-D0WD-V3 v3.0 
00:00:00.207 UFS: FlashFS mounted with 408 kB free
00:00:00.239 CFG: Loaded from File, Count 39
00:00:00.241 FRC: Some settings have been reset (2)
00:00:00.246 I2C: Bus1 using GPIO26(SCL) and GPIO25(SDA)
00:00:00.392 BRY: Berry initialized, RAM used=3932 bytes
00:00:00.457 TFS: File '.drvset003' not found
00:00:00.465 Project tasmota - Tasmota Version 13.2.0.1(zbbrdgpro)-2_0_14(2023-10-27T15:39:53)
00:00:01.183 WIF: Connecting to AP1 FRITZ!Box 7590 2.4 Channel 1 BSSId 2C:3A:FD:FB:F0:6E in mode 11n as tasmota-6063A4-0932...
00:00:03.005 WIF: Connected
00:00:03.262 HTP: Web server active on tasmota-6063A4-0932 with IP address 192.168.178.86
08:37:35.244 RSL: INFO1 = {"Info1":{"Module":"Sonoff Zigbee Pro","Version":"13.2.0.1(zbbrdgpro)","FallbackTopic":"cmnd/DVES_6063A4_fb/","GroupTopic":"cmnd/tasmotas/"}}
08:37:35.259 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-6063A4-0932","IPAddress":"192.168.178.86","IP6Global":"","IP6Local":"fe80::4222:d8ff:fe60:63a4"}}
08:37:35.273 RSL: INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":19}}
08:37:35.296 RUL: SYSTEM#BOOT performs "TCPStart 8888"
08:37:35.299 RSL: RESULT = {"Command":"Error"}
08:37:37.753 QPC: Reset
08:37:39.749 RSL: STATE = {"Time":"2023-10-28T08:37:39","Uptime":"0T00:00:09","UptimeSec":9,"Heap":165,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":20,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-28,"LinkCount":1,"Downtime":"0T00:00:04"}}
08:37:46.745 ZIG: rebooting ZNP device
08:37:49.397 RSL: RESULT = {"ZbState":{"Status":1,"Message":"CCxxxx ZNP booted","RestartReason":"Power-up","MajorRel":2,"MinorRel":7}}
08:37:49.597 RSL: RESULT = {"ZbState":{"Status":50,"MajorRel":2,"MinorRel":7,"MaintRel":1,"Revision":20230507}}
08:37:49.747 RSL: RESULT = {"ZbState":{"Status":2,"Message":"Resetting configuration"}}
08:37:51.997 RSL: RESULT = {"ZbState":{"Status":3,"Message":"Configured, starting coordinator"}}
08:37:56.197 RSL: RESULT = {"ZbState":{"Status":40,"NewState":9,"Message":"Started as coordinator"}}
08:37:56.297 RSL: RESULT = {"ZbState":{"Status":51,"IEEEAddr":"0x00124B00257B0374","ShortAddr":"0x0000","DeviceType":7,"DeviceState":9,"NumAssocDevices":0}}
08:37:56.797 RSL: RESULT = {"ZbState":{"Status":0,"Message":"Started"}}
08:37:56.800 ZIG: Zigbee started
08:37:56.808 ZIG: No Zigbee device information
08:37:56.811 ZIG: No Zigbee device data
08:37:56.813 ZIG: ZbLoad '<internal_plugin>' loaded successfully

Mit dier Einstellung bekomme ich aber keine Verbindung vom ioBroker zur Bridge aufgebaut.
Mit der Auto-configuration Sonoff ZBPro TCP bekomme ich keinerlei Meldungen bezüglich dem Chip, dafür kann die Verbindung wieder hergestellt werden. Zumindest steht das Connect drin.

00:00:00.003 HDW: ESP32-D0WD-V3 v3.0 
00:00:00.200 UFS: FlashFS mounted with 408 kB free
00:00:00.232 CFG: Loaded from File, Count 41
00:00:00.233 FRC: Some settings have been reset (2)
00:00:00.239 I2C: Bus1 using GPIO26(SCL) and GPIO25(SDA)
00:00:00.381 BRY: Berry initialized, RAM used=3936 bytes
00:00:00.450 TFS: File '.drvset003' not found
00:00:00.459 Project tasmota - Tasmota Version 13.2.0.1(zbbrdgpro)-2_0_14(2023-10-27T15:39:53)
00:00:01.195 WIF: Connecting to AP1 FRITZ!Box 7590 2.4 Channel 1 BSSId 2C:3A:FD:FB:F0:6E in mode 11n as tasmota-6063A4-0932...
00:00:03.020 WIF: Connected
00:00:03.276 HTP: Web server active on tasmota-6063A4-0932 with IP address 192.168.178.86
08:43:49.260 RSL: INFO1 = {"Info1":{"Module":"TCP ZBBridge Pro","Version":"13.2.0.1(zbbrdgpro)","FallbackTopic":"cmnd/DVES_6063A4_fb/","GroupTopic":"cmnd/tasmotas/"}}
08:43:49.275 RSL: INFO2 = {"Info2":{"WebServerMode":"Admin","Hostname":"tasmota-6063A4-0932","IPAddress":"192.168.178.86","IP6Global":"","IP6Local":"fe80::4222:d8ff:fe60:63a4"}}
08:43:49.289 RSL: INFO3 = {"Info3":{"RestartReason":"Software reset CPU","BootCount":20}}
08:43:49.312 RUL: SYSTEM#BOOT performs "TCPStart 8888"
08:43:49.314 TCP: Starting TCP server on port 8888
08:43:49.318 RSL: RESULT = {"TCPStart":"Done"}
08:43:51.779 QPC: Reset
08:43:53.794 RSL: STATE = {"Time":"2023-10-28T08:43:53","Uptime":"0T00:00:09","UptimeSec":9,"Heap":165,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"Berry":{"HeapUsed":3,"Objects":43},"Wifi":{"AP":1,"SSId":"FRITZ!Box 7590 2.4","BSSId":"2C:3A:FD:FB:F0:6E","Channel":1,"Mode":"11n","RSSI":100,"Signal":-31,"LinkCount":1,"Downtime":"0T00:00:04"}}
08:44:18.576 TCP: Got connection from 192.168.178.36

Jetzt die Frage: Sollte ich in der Tasmota console Zigbee infos angezeigt bekommen, wenn die Bridge auf TCP eingestellt ist?
Mir scheint ja fast, dass etwas mit den GPIO Einstellungen nicht passt. So als ob entweder eine c2652 Verbindung XOR eine TCP Verbindung aufgebaut werden kann.

Hier auch nochmal der Log vom ioBroker, mit der TCP Einstellung auf der Bridge:

2023-10-28 09:51:42.548 - info: zigbee.0 (14273) starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee) in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.20.2, js-controller: 5.0.12
2023-10-28 09:51:42.597 - info: zigbee.0 (14273) delete old Backup files. keep only last 10
2023-10-28 09:51:42.598 - info: zigbee.0 (14273) Starting Zigbee npm ...
2023-10-28 09:51:42.733 - info: zigbee.0 (14273) Installed Version: ioBroker/ioBroker.zigbee
2023-10-28 09:53:01.043 - info: admin.0 (6349) ==> Connected system.user.admin from ::ffff:192.168.178.89
2023-10-28 09:53:01.165 - error: zigbee.0 (14273) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2023-10-28 09:53:01.403 - info: zigbee.0 (14273) List of port: [{"path":"/dev/ttyS10"},{"path":"/dev/ttyS11"},{"path":"/dev/ttyS12"},{"path":"/dev/ttyS13"},{"path":"/dev/ttyS14"},{"path":"/dev/ttyS15"},{"path":"/dev/ttyS16"},{"path":"/dev/ttyS17"},{"path":"/dev/ttyS18"},{"path":"/dev/ttyS19"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS20"},{"path":"/dev/ttyS21"},{"path":"/dev/ttyS22"},{"path":"/dev/ttyS23"},{"path":"/dev/ttyS24"},{"path":"/dev/ttyS25"},{"path":"/dev/ttyS26"},{"path":"/dev/ttyS27"},{"path":"/dev/ttyS28"},{"path":"/dev/ttyS29"},{"path":"/dev/ttyS3"},{"path":"/dev/ttyS30"},{"path":"/dev/ttyS31"},{"path":"/dev/ttyS4"},{"path":"/dev/ttyS5"},{"path":"/dev/ttyS6"},{"path":"/dev/ttyS7"},{"path":"/dev/ttyS8"},{"path":"/dev/ttyS9"},{"path":"/dev/ttyS0"},{"path":"/dev/ttyS1"}]
2023-10-28 09:53:07.422 - info: admin.0 (6349) <== Disconnect system.user.admin from ::ffff:192.168.178.89
2023-10-28 09:53:09.031 - info: host.smarthome-VM stopInstance system.adapter.zigbee.0 (force=false, process=true)
2023-10-28 09:53:09.142 - info: zigbee.0 (14273) Got terminate signal TERMINATE_YOURSELF
2023-10-28 09:53:09.147 - info: host.smarthome-VM stopInstance system.adapter.zigbee.0 send kill signal
2023-10-28 09:53:09.143 - info: zigbee.0 (14273) cleaned everything up...
2023-10-28 09:53:09.145 - info: zigbee.0 (14273) Zigbee: disabling joining new devices.
2023-10-28 09:53:09.645 - info: zigbee.0 (14273) terminating
2023-10-28 09:53:09.647 - info: zigbee.0 (14273) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-10-28 09:53:10.154 - info: host.smarthome-VM stopInstance system.adapter.zigbee.0 killing pid 14273
2023-10-28 09:53:10.272 - info: host.smarthome-VM instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-10-28 09:53:12.223 - info: host.smarthome-VM instance system.adapter.zigbee.0 started with pid 14291
2023-10-28 09:53:14.780 - info: zigbee.0 (14291) starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee) in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.20.2, js-controller: 5.0.12
2023-10-28 09:53:14.830 - info: zigbee.0 (14291) delete old Backup files. keep only last 10
2023-10-28 09:53:14.831 - info: zigbee.0 (14291) Starting Zigbee npm ...
2023-10-28 09:53:14.928 - info: zigbee.0 (14291) Installed Version: ioBroker/ioBroker.zigbee
2023-10-28 09:54:09.764 - info: host.smarthome-VM instance system.adapter.solarmanpv.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-10-28 09:54:18.878 - info: admin.0 (6349) ==> Connected system.user.admin from ::ffff:192.168.178.89
2023-10-28 09:54:19.145 - error: zigbee.0 (14291) getGroups: caught error: TypeError: Cannot read properties of undefined (reading 'getGroups')
2023-10-28 09:54:19.329 - info: zigbee.0 (14291) List of port: [{"path":"/dev/ttyS10"},{"path":"/dev/ttyS11"},{"path":"/dev/ttyS12"},{"path":"/dev/ttyS13"},{"path":"/dev/ttyS14"},{"path":"/dev/ttyS15"},{"path":"/dev/ttyS16"},{"path":"/dev/ttyS17"},{"path":"/dev/ttyS18"},{"path":"/dev/ttyS19"},{"path":"/dev/ttyS2"},{"path":"/dev/ttyS20"},{"path":"/dev/ttyS21"},{"path":"/dev/ttyS22"},{"path":"/dev/ttyS23"},{"path":"/dev/ttyS24"},{"path":"/dev/ttyS25"},{"path":"/dev/ttyS26"},{"path":"/dev/ttyS27"},{"path":"/dev/ttyS28"},{"path":"/dev/ttyS29"},{"path":"/dev/ttyS3"},{"path":"/dev/ttyS30"},{"path":"/dev/ttyS31"},{"path":"/dev/ttyS4"},{"path":"/dev/ttyS5"},{"path":"/dev/ttyS6"},{"path":"/dev/ttyS7"},{"path":"/dev/ttyS8"},{"path":"/dev/ttyS9"},{"path":"/dev/ttyS0"},{"path":"/dev/ttyS1"}]
2023-10-28 09:54:54.365 - info: zigbee.0 (14291) Coordinator firmware version: {"type":"zStack3x0","meta":{"transportrev":2,"product":1,"majorrel":2,"minorrel":7,"maintrel":1,"revision":20230507}}
2023-10-28 09:54:54.432 - info: zigbee.0 (14291) Unable to disable LED, unsupported function.
2023-10-28 09:54:54.498 - info: zigbee.0 (14291) --> transmitPower : normal
2023-10-28 09:54:54.849 - info: zigbee.0 (14291) Currently no devices.
2023-10-28 09:54:54.849 - info: zigbee.0 (14291) Zigbee started
2023-10-28 09:54:54.853 - error: zigbee.0 (14291) Unable to apply ExtPanID changes: Error: SRSP - SYS - osalNvRead after 0,2ms
2023-10-28 09:54:54.890 - info: host.smarthome-VM stopInstance system.adapter.zigbee.0 (force=false, process=true)
2023-10-28 09:54:54.972 - info: zigbee.0 (14291) Got terminate signal TERMINATE_YOURSELF
2023-10-28 09:54:54.980 - info: host.smarthome-VM stopInstance system.adapter.zigbee.0 send kill signal
2023-10-28 09:54:54.972 - info: zigbee.0 (14291) cleaned everything up...
2023-10-28 09:54:54.973 - info: zigbee.0 (14291) Zigbee: disabling joining new devices.
2023-10-28 09:54:54.999 - info: zigbee.0 (14291) debug devices set to []
2023-10-28 09:54:55.474 - info: zigbee.0 (14291) terminating
2023-10-28 09:54:55.475 - info: zigbee.0 (14291) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-10-28 09:54:55.981 - info: host.smarthome-VM stopInstance system.adapter.zigbee.0 killing pid 14291
2023-10-28 09:54:56.008 - info: host.smarthome-VM instance system.adapter.zigbee.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-10-28 09:54:58.063 - info: host.smarthome-VM instance system.adapter.zigbee.0 started with pid 14322
2023-10-28 09:55:00.927 - info: zigbee.0 (14322) starting. Version 1.8.24 (non-npm: ioBroker/ioBroker.zigbee) in /opt/iobroker/node_modules/iobroker.zigbee, node: v16.20.2, js-controller: 5.0.12
2023-10-28 09:55:01.017 - info: zigbee.0 (14322) delete old Backup files. keep only last 10
2023-10-28 09:55:01.019 - info: zigbee.0 (14322) Starting Zigbee npm ...
2023-10-28 09:55:01.209 - info: zigbee.0 (14322) Installed Version: ioBroker/ioBroker.zigbee
2023-10-28 09:55:20.906 - error: zigbee.0 (14322) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2023-10-28 09:55:20.907 - error: zigbee.0 (14322) Failed to start Zigbee
2023-10-28 09:55:20.907 - error: zigbee.0 (14322) Error herdsman start
2023-10-28 09:55:30.911 - info: zigbee.0 (14322) Try to reconnect.
2023-10-28 09:55:30.912 - info: zigbee.0 (14322) Starting Zigbee npm ...
2023-10-28 09:55:30.924 - info: zigbee.0 (14322) Installed Version: ioBroker/ioBroker.zigbee
2023-10-28 09:55:48.615 - info: admin.0 (6349) <== Disconnect system.user.admin from ::ffff:192.168.178.89
2023-10-28 09:55:49.971 - error: zigbee.0 (14322) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2023-10-28 09:55:49.973 - error: zigbee.0 (14322) Failed to start Zigbee
2023-10-28 09:55:49.974 - error: zigbee.0 (14322) Error herdsman start
2023-10-28 09:55:59.976 - info: zigbee.0 (14322) Try to reconnect.
2023-10-28 09:55:59.977 - info: zigbee.0 (14322) Starting Zigbee npm ...
2023-10-28 09:55:59.992 - info: zigbee.0 (14322) Installed Version: ioBroker/ioBroker.zigbee
2023-10-28 09:56:19.054 - error: zigbee.0 (14322) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2023-10-28 09:56:19.056 - error: zigbee.0 (14322) Failed to start Zigbee
2023-10-28 09:56:19.056 - error: zigbee.0 (14322) Error herdsman start
2023-10-28 09:56:29.061 - info: zigbee.0 (14322) Try to reconnect.
2023-10-28 09:56:29.063 - info: zigbee.0 (14322) Starting Zigbee npm ...
2023-10-28 09:56:29.073 - info: zigbee.0 (14322) Installed Version: ioBroker/ioBroker.zigbee
2023-10-28 09:56:48.128 - error: zigbee.0 (14322) Starting zigbee-herdsman problem : "Failed to connect to the adapter (Error: SRSP - SYS - ping after 6000ms)"
2023-10-28 09:56:48.131 - error: zigbee.0 (14322) Failed to start Zigbee
2023-10-28 09:56:48.131 - error: zigbee.0 (14322) Error herdsman start
2023-10-28 09:56:58.134 - info: zigbee.0 (14322) Try to reconnect.
2023-10-28 09:56:58.134 - info: zigbee.0 (14322) Starting Zigbee npm ...
2023-10-28 09:56:58.142 - info: zigbee.0 (14322) Installed Version: ioBroker/ioBroker.zigbee

[Ralla66]

@snert

langsam, was passiert nach cc.flash()

habe da Time Out

bei dir sollte stehen:

21:47:07.140 FLH: Verification of HEX file OK
21:49:06.780 FLH: cc2652_flasher rx=23 tx=19 rst=15 bsl=22
21:49:06.828 FLH: Flashing started (takes 5 minutes during which Tasmota is unresponsive)
21:54:43.835 FLH: Flashing completed: OK
21:54:43.948 FLH: Flash crc32 0x000000 - 0x2FFFF = bytes('1598929A')

[Ralla66]

@ralla66

lass mal Autoconfig , IO, TCP sein, gehe strikt nach Anleitung vor.
Console meldet ja:
No Zigbee device information
Also wird das Device ja nicht von der Bridge gefunden.

Ota flashen ist immer kritisch da Reste im Speicher verbleiben können.
Besser ist flashen mit FTDI per Kabel und Erase des Speicher.

Das Gerät wird wohl gefunden als
08:37:56.297 RSL: RESULT = {"ZbState":{"Status":51,"IEEEAddr":"0x00124B00257B0374"
schau mal ob die Addr vom ZB Device passt.