[Frage] Realisierung Adapter UDP Keba Wallbox

[Sneak-L8]

@keksn Da triffst du einen offenen Punkt. Ich hatte weiter oben im Thread mal ein paar Batterie-Ladeszenarien vorgeschlagen. Bisher kann man die Batterie nicht wirklich mit einbinden.

Allerdings wird eine Steuerung abhängig vom SoC (ich denke, Du meinst den des Fahrzeugs und nicht der Batterie?) schwierig. Der SoC kann von der Wallbox nicht ausgelesen werden. Das heißt, es müsste nun der SoC eines bestimmten Fahrzeugs gelesen werden. Es ist aber nirgends prüfbar, ob gerade dieses Fahrzeug gleaden wird oder ein anders (z.B. Gast).
Daher möchte ich diese Abhängigkeit ungern im Adapter implementieren. Ich kann aber die Lademodi als State anlegen. So kann man sie entweder generell über die Einstellungen oder dynamisch (z.B. über ein eigenes Skript, das den SoC berücksichtigt) über einen State regelbar machen.

[keksn]

@sneak-l8 nein ich meine den SOC der Inverter Batterie. Wenn die Batterie voll geladen ist wäre es gut den Ladevorgang bei Überschussladung auch einzubinden(möglicherweise wahlweise). Um die 100% geladene Batterie zur Abgabe der Energie zu animieren müsste aber der Ladevorgang mit voller Leistung beginnend. Macht das die Regelung jetzt so ?

[Christian Kohlöffel]

Hi @sneak-l8 , ich hab das Update nun schon mehrere Tage am Laufen und ich habe bisher keine Probleme feststellen können. Also

[Malz1902]

Hallo zusammen,

ich woillte nun das PV Laden einrichten, weiß aber nicht so genau was ich wo ein tragen muss.

Ich möchte einfach nur das wenn ich lade und der Verbrauch mehr als 500 Watt ausm Netz bezträgt, dass der Ladevorgng gestoppt wird.

In

alias.0.strom.stromzaehler.moment_verbrauch

steht der aktuelle Verbrauch in Watt also 1000,2500 oder halt -1500 etc

Aktuell habe ich eine PV Leistung von ca. 3500 Watt
Das Auto lädt mit 5500 Watt
In

kecontact.0.statistics.surplus

steht 2683, müsste hier nicht ein Negativer Wert stehen?

[Malz1902]

weiterhin ist mir aufgefallen, dass wenn ich mein Auto an die Wallbox anschließe und das laden starte dann klappt es, stoppe ich manuell das laden geht es auch, aber wenn ich dann wieder starten will geht das nicht.
kecontact.0.state bleibt auf 5 stehen.

auch hat kecontact.0.automatic.pauseWallbox keine Auswirkung das Laden stoppt nicht

[Sneak-L8]

@malz1902
Der momentan_verbrauch ist positiv, wenn Du Strom aus dem Netz ziehst und negativ, wenn Du Strom einspeist. Richtig?

Wenn Du eine nsurplus von 2.683W im Adapter stehen has,t dann sieht das doch ganz gut aus. Die PV liefert 3.500W und der Rest im Haus braucht dan gerade so ca. 900W. Alles plausibel.

Welchen Wallbox-Typ hast Du denn? Und was steht in den Logs?

Das wäre auch für Deine 2. Frage sehr interessant. Denn eigentlich funktionieren die States korrekt.
Beschreibe doch mal, was Du konkret tust. Stoppst Du das Laden über einen State im Adapter, über eine Fahrzeug-App? Was ist das für ein Auto? Sind da vielleicht Probleme mit Überschuss-Laden bekannt?
Und dann gib neben dder Info wann (Uhrzeit) Du was getan hast, das Log dazu. Im Optimalfall im Debug-Modus. Dann kann man sich das Anschauen. Sonst ist das eher ein Rätselraten.

[Christian Kohlöffel]

@sneak-l8 Hab heute wieder den Fehler gehabt, dass die Wallbox nicht abschaltet obwohl die Wallbox von aussen pausiert wurde. Ich hatte noch erinnerung, dass dies genau mit dem von Dir genannten Punkt in Verbindung stand. Dazu sollten wir uns nochmals eine Abfrage einfallen lassen, der das verhindert. Ohne die oben referenziert Änderung hat er noch erkannt, dass er ungewollt weitergeladen hat durch das schalten des X2 Switches ...

[Sneak-L8]

@christian-kohlöffel hast Du die neuste Version von github im Einsatz?

[Malz1902]

@sneak-l8

@sneak-l8 said in [Frage] Realisierung Adapter UDP Keba Wallbox:

Der momentan_verbrauch ist positiv, wenn Du Strom aus dem Netz ziehst und negativ, wenn Du Strom einspeist. Richtig?

Ja genau richtig,

@sneak-l8 said in [Frage] Realisierung Adapter UDP Keba Wallbox:

Wenn Du eine nsurplus von 2.683W im Adapter stehen has,t dann sieht das doch ganz gut aus. Die PV liefert 3.500W und der Rest im Haus braucht dan gerade so ca. 900W. Alles plausibel.

Aber sollte die Wallbox dann nicht abschalten, da ja mehr als 1500 Watt aus dem Netz gezogen wird? Oder verssteh ich das falsch?

@sneak-l8 said in [Frage] Realisierung Adapter UDP Keba Wallbox:

Welchen Wallbox-Typ hast Du denn? Und was steht in den Logs?

Keba P90 x-series

@sneak-l8 said in [Frage] Realisierung Adapter UDP Keba Wallbox:

Was ist das für ein Auto?

Auto is ein VW ID4

@sneak-l8 said in [Frage] Realisierung Adapter UDP Keba Wallbox:

Beschreibe doch mal, was Du konkret tust. Stoppst Du das Laden über einen State im Adapter, über eine Fahrzeug-App?

Ich schließe das Kabel der Wallbox ans Auto, geh am PC und setzte im iobroker im state kecontact.0.start meinen RFID Tag, das Laden startet.
Jetzt dachte ich wenn ich kecontact.0.automatic.pauseWallbox von false auf true setze, dann stoppt das Laden, hat aber in diesem Fall nicht funktioniert. Dann habe ich in kecontact.0.stop meinen RFID Tag eingegeben um zu stoppen, auch das ging nicht. Wenn ich über das WebUI der Wallbox gehe und da auf Ladung stoppen klicke unter Aktionen, dann klappt das. kecontact.0.state setzt sich dann auch von 3 was anscheinend laden ist auf 5 was für pausiert steht? Aber ich kann nun das Laden via ioBroker noch direkt in der Ui der Wallbox starten, ich muss bei Aktionen in der WebUI erst auf neu starten klicken, dann setzt sich in iobroker der State kecontact.0.state wie auf 1, erst danach kann ich wieder eine Ladung starten

Logs kann ich nachher mal schicken, dann geh ich die Schritte alle nochmal durch

[Malz1902]

2023-10-06 12:20:25.024 - debug: kecontact.0 (392611) UDP datagram from 192.168.188.97:7090: 'TCH-ERR:no need for start
kecontact.0
	2023-10-06 13:52:29.333	error	Error received from wallbox: TCH-ERR:nothing to stop

Das passiert, wenn ich starten bzw stoppen will

So ich habe jetzt das Auto an die Wallbox geschlossen

Noch lädt nichts
Dann habe ich unter kecontact.0.start meine RFID Nummer eingetragen, laden startet kecontact.0.automatic.pauseWallbox steht auf false, kecontact.0.state auf 3.

kecontact.0
	2023-10-06 11:00:26.458	info	vehicle (re)starts to charge

Jetzt habe ich kecontact.0.automatic.pauseWallbox auf true gesetzt:

kecontact.0
	2023-10-06 11:01:54.829	info	change pause status of wallbox from false to true

Es wird jedoch weiter geladen, kecontact.0.state steht weiterhin auf 3
Auch wenn ich kecontact.0.automatic.pauseWallbox wieder auf false setze steht im Log folgendes aber auch dann wird weiter geladen

kecontact.0
	2023-10-06 11:03:59.127	info	change pause status of wallbox from true to false

Dann habe ich in kecontact.0.stop meinen RFID Tag eingetragen, kecontact.0.state wechselt auf 5, das Laden stoppt, das war um 11:06
Um 11:10:52 habe ich dann nochmal versucht kecontact.0.automatic.pauseWallbox auf true zu setzen, aber auch jetzt startet keine Ladung
kecontact.0.state bleibt auf 5 stehen

Jetzt habe ich kecontact.0.stop wieder gelöscht

2023-10-06 11:13:17.554 - error: kecontact.0 (371943) Error received from wallbox: TCH-ERR:: wrong parameter count

Danach nochmal kecontact.0.start gespeichert, laden startet wieder

2023-10-06 11:14:07.601 - debug: kecontact.0 (371943) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-06 11:14:07.602 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-06 11:14:07.602 - debug: kecontact.0 (371943) Received TCH-OK :done
2023-10-06 11:14:08.051 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 1}'
2023-10-06 11:14:09.034 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Max curr": 16000}'
2023-10-06 11:14:12.506 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"State": 2}'

kecontact.0.state steht dann wieder auf 3

2023-10-06 10:59:26.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 10:59:26.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 1,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155476
}
'
2023-10-06 10:59:26.352 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 10:59:26.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 107271,
"E total": 41137346,
"Serial": "22195027",
"Sec": 155476
}
'
2023-10-06 10:59:26.405 - debug: kecontact.0 (371943) Available surplus: 5544
2023-10-06 10:59:26.652 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 10:59:26.654 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 107,
"Curr HW": 16000,
"E start": 41030075,
"E pres": 107271,
"started[s]": 1696507229,
"ended[s]": 1696516717,
"started": "2023-10-05 12:00:29.000",
"ended": "2023-10-05 14:38:37.000",
"reason": 1,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "62f7b57f000000000000",
"Serial": "22195027",
"Sec": 155477
}
'
2023-10-06 10:59:26.655 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 10:59:51.187 - debug: kecontact.0 (371943) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-06 10:59:51.189 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-06 10:59:51.189 - debug: kecontact.0 (371943) Received TCH-OK :done
2023-10-06 10:59:51.633 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 1}'
2023-10-06 10:59:52.980 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Max curr": 16000}'
2023-10-06 10:59:56.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 10:59:56.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 1,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155506
}
'
2023-10-06 10:59:56.307 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"State": 2}'
2023-10-06 10:59:56.352 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 10:59:56.353 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 231,
"U2": 231,
"U3": 232,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 0,
"E total": 41137346,
"Serial": "22195027",
"Sec": 155506
}
'
2023-10-06 10:59:56.452 - debug: kecontact.0 (371943) Available surplus: 5345
2023-10-06 10:59:56.507 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Max curr": 6000}'
2023-10-06 10:59:56.652 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 10:59:56.653 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 0,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155507
}
'
2023-10-06 10:59:56.654 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 10:59:58.816 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"State": 3}'
2023-10-06 11:00:00.012 - info: javascript.0 (1762973) script.js.common.speedtest: Speedtest mit Server 29320 gestartet! Der Test dauert zwischen 10 - 20 Sekunden!
2023-10-06 11:00:00.032 - info: javascript.0 (1762973) script.js.strom.zirkulation_on_off: Steckdose ist bereits an - Zirkulation an
2023-10-06 11:00:04.651 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Max curr": 16000}'
2023-10-06 11:00:05.278 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 56}'
2023-10-06 11:00:11.961 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 156}'
2023-10-06 11:00:16.448 - info: javascript.0 (1762973) script.js.common.speedtest: Speedtest durchgeführt. Ergebnisse: Download: 246.52 MBit/s | Upload: 42.7 MBit/s | Ping: 11.755ms
2023-10-06 11:00:18.437 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 254}'
2023-10-06 11:00:25.121 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 356}'
2023-10-06 11:00:26.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:00:26.053 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155536
}
'
2023-10-06 11:00:26.352 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:00:26.353 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 235,
"U2": 234,
"U3": 234,
"I1": 7907,
"I2": 8019,
"I3": 7948,
"P": 5578540,
"PF": 994,
"E pres": 373,
"E total": 41137719,
"Serial": "22195027",
"Sec": 155536
}
'
2023-10-06 11:00:26.458 - info: kecontact.0 (371943) vehicle (re)starts to charge
2023-10-06 11:00:26.458 - debug: kecontact.0 (371943) Available surplus: 5551.54
2023-10-06 11:00:26.652 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:00:26.653 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 379,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155537
}
'
2023-10-06 11:00:26.654 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:00:31.385 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 454}'
2023-10-06 11:00:37.861 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 554}'
2023-10-06 11:00:44.335 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 654}'
2023-10-06 11:00:50.808 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 754}'
2023-10-06 11:00:56.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:00:56.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155566
}
'
2023-10-06 11:00:56.352 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:00:56.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 235,
"U2": 234,
"U3": 234,
"I1": 7900,
"I2": 8015,
"I3": 7960,
"P": 5577512,
"PF": 994,
"E pres": 838,
"E total": 41138184,
"Serial": "22195027",
"Sec": 155566
}
'
2023-10-06 11:00:56.402 - debug: kecontact.0 (371943) Available surplus: 5691.512
2023-10-06 11:00:56.653 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:00:56.655 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 845,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155567
}
'
2023-10-06 11:00:56.655 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:00:57.282 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 855}'
2023-10-06 11:01:03.757 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 955}'
2023-10-06 11:01:10.232 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1055}'
2023-10-06 11:01:16.707 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1155}'
2023-10-06 11:01:23.182 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1256}'
2023-10-06 11:01:26.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:01:26.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155596
}
'
2023-10-06 11:01:26.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:01:26.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 235,
"U2": 233,
"U3": 235,
"I1": 7889,
"I2": 8012,
"I3": 7934,
"P": 5568697,
"PF": 994,
"E pres": 1304,
"E total": 41138650,
"Serial": "22195027",
"Sec": 155596
}
'
2023-10-06 11:01:26.416 - debug: kecontact.0 (371943) Available surplus: 5506.697
2023-10-06 11:01:26.653 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:01:26.654 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 1307,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155597
}
'
2023-10-06 11:01:26.654 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:01:29.659 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1356}'
2023-10-06 11:01:36.136 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1456}'
2023-10-06 11:01:42.613 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1557}'
2023-10-06 11:01:48.879 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1654}'
2023-10-06 11:01:54.829 - info: kecontact.0 (371943) change pause status of wallbox from false to true
2023-10-06 11:01:54.829 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:01:54.831 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155625
}
'
2023-10-06 11:01:55.129 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:01:55.130 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 234,
"U2": 233,
"U3": 235,
"I1": 7929,
"I2": 8020,
"I3": 7936,
"P": 5569891,
"PF": 994,
"E pres": 1748,
"E total": 41139094,
"Serial": "22195027",
"Sec": 155625
}
'
2023-10-06 11:01:55.177 - debug: kecontact.0 (371943) Available surplus: 5776.891
2023-10-06 11:01:55.356 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1754}'
2023-10-06 11:01:55.430 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:01:55.431 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 1754,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155625
}
'
2023-10-06 11:01:55.431 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:01:56.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:01:56.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155626
}
'
2023-10-06 11:01:56.352 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:01:56.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 234,
"U2": 233,
"U3": 235,
"I1": 7942,
"I2": 8025,
"I3": 7955,
"P": 5579952,
"PF": 994,
"E pres": 1767,
"E total": 41139113,
"Serial": "22195027",
"Sec": 155626
}
'
2023-10-06 11:01:56.396 - debug: kecontact.0 (371943) Available surplus: 5591.952
2023-10-06 11:01:56.653 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:01:56.654 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 1773,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155627
}
'
2023-10-06 11:01:56.654 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:02:01.829 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1854}'
2023-10-06 11:02:08.304 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 1954}'
2023-10-06 11:02:14.777 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2055}'
2023-10-06 11:02:21.252 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2155}'
2023-10-06 11:02:26.026 - info: javascript.0 (1762973) script.js.strom.zirkulation_on_off: changeStateSteckdoseZirkulation
2023-10-06 11:02:26.026 - info: javascript.0 (1762973) script.js.strom.zirkulation_on_off: Steckdose aus - Zirkulation aus
2023-10-06 11:02:26.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:02:26.053 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155656
}
'
2023-10-06 11:02:26.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:02:26.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 234,
"U2": 234,
"U3": 234,
"I1": 7916,
"I2": 8004,
"I3": 7951,
"P": 5568183,
"PF": 994,
"E pres": 2233,
"E total": 41139579,
"Serial": "22195027",
"Sec": 155656
}
'
2023-10-06 11:02:26.400 - debug: kecontact.0 (371943) Available surplus: 5480.183
2023-10-06 11:02:26.653 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:02:26.655 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 2236,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155657
}
'
2023-10-06 11:02:26.655 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:02:27.726 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2255}'
2023-10-06 11:02:34.205 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2356}'
2023-10-06 11:02:40.681 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2456}'
2023-10-06 11:02:47.157 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2556}'
2023-10-06 11:02:53.634 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2656}'
2023-10-06 11:02:56.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:02:56.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155686
}
'
2023-10-06 11:02:56.352 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:02:56.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 234,
"U2": 234,
"U3": 234,
"I1": 7831,
"I2": 8031,
"I3": 7978,
"P": 5567567,
"PF": 995,
"E pres": 2698,
"E total": 41140044,
"Serial": "22195027",
"Sec": 155686
}
'
2023-10-06 11:02:56.414 - debug: kecontact.0 (371943) Available surplus: 5384.567
2023-10-06 11:02:56.652 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:02:56.654 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 2701,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155687
}
'
2023-10-06 11:02:56.654 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:03:00.108 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2756}'
2023-10-06 11:03:06.581 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2856}'
2023-10-06 11:03:13.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 2955}'
2023-10-06 11:03:19.533 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3054}'
2023-10-06 11:03:26.012 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3154}'
2023-10-06 11:03:26.052 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:03:26.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155716
}
'
2023-10-06 11:03:26.352 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:03:26.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 234,
"U2": 232,
"U3": 234,
"I1": 7931,
"I2": 7905,
"I3": 7967,
"P": 5535944,
"PF": 994,
"E pres": 3157,
"E total": 41140503,
"Serial": "22195027",
"Sec": 155716
}
'
2023-10-06 11:03:26.451 - debug: kecontact.0 (371943) Available surplus: 5476.944
2023-10-06 11:03:26.652 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:03:26.653 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 3164,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155717
}
'
2023-10-06 11:03:26.653 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:03:32.489 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3254}'
2023-10-06 11:03:39.174 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3356}'
2023-10-06 11:03:45.650 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3456}'
2023-10-06 11:03:52.128 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3555}'
2023-10-06 11:03:56.053 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:03:56.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155746
}
'
2023-10-06 11:03:56.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:03:56.355 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 235,
"U2": 232,
"U3": 234,
"I1": 7784,
"I2": 8021,
"I3": 7981,
"P": 5523880,
"PF": 995,
"E pres": 3619,
"E total": 41140965,
"Serial": "22195027",
"Sec": 155746
}
'
2023-10-06 11:03:56.402 - debug: kecontact.0 (371943) Available surplus: 5385.88
2023-10-06 11:03:56.653 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:03:56.654 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 3622,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155747
}
'
2023-10-06 11:03:56.655 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:03:58.605 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3654}'
2023-10-06 11:03:59.127 - info: kecontact.0 (371943) change pause status of wallbox from true to false
2023-10-06 11:03:59.127 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:03:59.129 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155749
}
'
2023-10-06 11:03:59.427 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:03:59.429 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 235,
"U2": 233,
"U3": 234,
"I1": 7774,
"I2": 8025,
"I3": 7981,
"P": 5570238,
"PF": 994,
"E pres": 3664,
"E total": 41141010,
"Serial": "22195027",
"Sec": 155749
}
'
2023-10-06 11:03:59.520 - debug: kecontact.0 (371943) Available surplus: 5538.238
2023-10-06 11:03:59.727 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:03:59.728 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 3671,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155750
}
'
2023-10-06 11:03:59.729 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:04:05.084 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3754}'
2023-10-06 11:04:11.563 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3854}'
2023-10-06 11:04:18.041 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 3954}'
2023-10-06 11:04:24.729 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4057}'
2023-10-06 11:04:26.053 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:04:26.055 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155776
}
'
2023-10-06 11:04:26.354 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:04:26.355 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 235,
"U2": 233,
"U3": 234,
"I1": 7755,
"I2": 7920,
"I3": 7954,
"P": 5503744,
"PF": 994,
"E pres": 4079,
"E total": 41141425,
"Serial": "22195027",
"Sec": 155776
}
'
2023-10-06 11:04:26.398 - debug: kecontact.0 (371943) Available surplus: 5301.744
2023-10-06 11:04:26.654 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:04:26.656 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 4086,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155777
}
'
2023-10-06 11:04:26.656 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:04:31.208 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4156}'
2023-10-06 11:04:37.686 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4256}'
2023-10-06 11:04:44.164 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4356}'
2023-10-06 11:04:50.642 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4455}'
2023-10-06 11:04:56.053 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:04:56.055 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155806
}
'
2023-10-06 11:04:56.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:04:56.355 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 235,
"U2": 233,
"U3": 233,
"I1": 7747,
"I2": 8010,
"I3": 8001,
"P": 5537171,
"PF": 994,
"E pres": 4542,
"E total": 41141888,
"Serial": "22195027",
"Sec": 155806
}
'
2023-10-06 11:04:56.410 - debug: kecontact.0 (371943) Available surplus: 5029.171
2023-10-06 11:04:56.654 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:04:56.656 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 4545,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155807
}
'
2023-10-06 11:04:56.656 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:04:57.121 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4554}'
2023-10-06 11:05:03.597 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4654}'
2023-10-06 11:05:10.285 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4757}'
2023-10-06 11:05:16.763 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4856}'
2023-10-06 11:05:23.241 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 4956}'
2023-10-06 11:05:26.053 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:05:26.055 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155836
}
'
2023-10-06 11:05:26.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:05:26.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 236,
"U2": 233,
"U3": 234,
"I1": 7779,
"I2": 8033,
"I3": 7969,
"P": 5568973,
"PF": 994,
"E pres": 5001,
"E total": 41142347,
"Serial": "22195027",
"Sec": 155836
}
'
2023-10-06 11:05:26.415 - debug: kecontact.0 (371943) Available surplus: 5403.973
2023-10-06 11:05:26.654 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:05:26.655 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 5008,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155837
}
'
2023-10-06 11:05:26.656 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:05:29.720 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5056}'
2023-10-06 11:05:36.199 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5156}'
2023-10-06 11:05:42.677 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5256}'
2023-10-06 11:05:49.156 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5356}'
2023-10-06 11:05:55.634 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5456}'
2023-10-06 11:05:56.053 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:05:56.054 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155866
}
'
2023-10-06 11:05:56.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:05:56.354 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 236,
"U2": 233,
"U3": 234,
"I1": 7885,
"I2": 8045,
"I3": 7983,
"P": 5581795,
"PF": 995,
"E pres": 5465,
"E total": 41142811,
"Serial": "22195027",
"Sec": 155866
}
'
2023-10-06 11:05:56.416 - debug: kecontact.0 (371943) Available surplus: 5454.795
2023-10-06 11:05:56.653 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:05:56.656 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 5469,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155867
}
'
2023-10-06 11:05:56.656 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:06:02.113 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5556}'
2023-10-06 11:06:08.591 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5655}'
2023-10-06 11:06:15.070 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5755}'
2023-10-06 11:06:21.547 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5855}'
2023-10-06 11:06:26.053 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:06:26.056 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155896
}
'
2023-10-06 11:06:26.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:06:26.355 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 236,
"U2": 232,
"U3": 234,
"I1": 7882,
"I2": 7911,
"I3": 7976,
"P": 5539495,
"PF": 994,
"E pres": 5929,
"E total": 41143275,
"Serial": "22195027",
"Sec": 155896
}
'
2023-10-06 11:06:26.396 - debug: kecontact.0 (371943) Available surplus: 4843.495
2023-10-06 11:06:26.653 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:06:26.655 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 5932,
"started[s]": 1696582765,
"ended[s]": 0,
"started": "2023-10-06 08:59:25.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155897
}
'
2023-10-06 11:06:26.655 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:06:28.025 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 5954}'
2023-10-06 11:06:34.504 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 6054}'
2023-10-06 11:06:40.981 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"E pres": 6154}'
2023-10-06 11:06:44.167 - debug: kecontact.0 (371943) Sent 'stop [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-06 11:06:44.168 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-06 11:06:44.168 - debug: kecontact.0 (371943) Received TCH-OK :done
2023-10-06 11:06:44.494 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 0}'
2023-10-06 11:06:44.496 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"State": 5}'
2023-10-06 11:06:44.537 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Max curr": 0}'
2023-10-06 11:06:56.053 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:06:56.055 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155926
}
'
2023-10-06 11:06:56.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:06:56.355 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 155926
}
'
2023-10-06 11:06:56.404 - debug: kecontact.0 (371943) Available surplus: 4655
2023-10-06 11:06:56.653 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:06:56.655 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155927
}
'
2023-10-06 11:06:56.655 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:07:26.053 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:07:26.055 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155956
}
'
2023-10-06 11:07:26.353 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:07:26.355 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 155956
}
'
2023-10-06 11:07:26.398 - debug: kecontact.0 (371943) Available surplus: 5004
2023-10-06 11:07:26.654 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:07:26.656 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155957
}
'
2023-10-06 11:07:26.656 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:07:56.054 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:07:56.056 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 155986
}
'
2023-10-06 11:07:56.354 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:07:56.355 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 155986
}
'
2023-10-06 11:07:56.395 - debug: kecontact.0 (371943) Available surplus: 5024
2023-10-06 11:07:56.655 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:07:56.657 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 155987
}
'
2023-10-06 11:07:56.657 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:08:26.055 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:08:26.057 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156016
}
'
2023-10-06 11:08:26.355 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:08:26.357 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156016
}
'
2023-10-06 11:08:26.421 - debug: kecontact.0 (371943) Available surplus: 4376
2023-10-06 11:08:26.656 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:08:26.657 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156017
}
'
2023-10-06 11:08:26.657 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:08:56.055 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:08:56.056 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156046
}
'
2023-10-06 11:08:56.355 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:08:56.357 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156046
}
'
2023-10-06 11:08:56.402 - debug: kecontact.0 (371943) Available surplus: 3674
2023-10-06 11:08:56.656 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:08:56.657 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156047
}
'
2023-10-06 11:08:56.658 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:09:26.055 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:09:26.057 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156076
}
'
2023-10-06 11:09:26.355 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:09:26.356 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156076
}
'
2023-10-06 11:09:26.414 - debug: kecontact.0 (371943) Available surplus: 4203
2023-10-06 11:09:26.655 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:09:26.658 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156077
}
'
2023-10-06 11:09:26.658 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:09:56.055 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:09:56.057 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156106
}
'
2023-10-06 11:09:56.355 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:09:56.357 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156106
}
'
2023-10-06 11:09:56.406 - debug: kecontact.0 (371943) Available surplus: 5204
2023-10-06 11:09:56.656 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:09:56.658 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156107
}
'
2023-10-06 11:09:56.658 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:10:00.034 - info: javascript.0 (1762973) script.js.strom.zirkulation_on_off: changeStateSteckdoseZirkulation
2023-10-06 11:10:00.034 - info: javascript.0 (1762973) script.js.strom.zirkulation_on_off: Steckdose ist bereits aus - Zirkulation aus
2023-10-06 11:10:26.056 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:10:26.057 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156136
}
'
2023-10-06 11:10:26.356 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:10:26.358 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156136
}
'
2023-10-06 11:10:26.454 - debug: kecontact.0 (371943) Available surplus: 5275
2023-10-06 11:10:26.656 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:10:26.658 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156137
}
'
2023-10-06 11:10:26.658 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:10:52.396 - info: kecontact.0 (371943) change pause status of wallbox from false to true
2023-10-06 11:10:52.397 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:10:52.398 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156162
}
'
2023-10-06 11:10:52.697 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:10:52.699 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156163
}
'
2023-10-06 11:10:52.748 - debug: kecontact.0 (371943) Available surplus: 4437
2023-10-06 11:10:52.998 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:10:53.000 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156163
}
'
2023-10-06 11:10:53.001 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:10:56.056 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:10:56.057 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156166
}
'
2023-10-06 11:10:56.356 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:10:56.357 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156166
}
'
2023-10-06 11:10:56.656 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:10:56.659 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156167
}
'
2023-10-06 11:10:56.659 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:10:57.486 - debug: kecontact.0 (371943) Available surplus: 4285
2023-10-06 11:11:26.056 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:11:26.058 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156196
}
'
2023-10-06 11:11:26.356 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:11:26.357 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156196
}
'
2023-10-06 11:11:26.409 - debug: kecontact.0 (371943) Available surplus: 4063
2023-10-06 11:11:26.656 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:11:26.658 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156197
}
'
2023-10-06 11:11:26.658 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:11:56.056 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:11:56.058 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156226
}
'
2023-10-06 11:11:56.356 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:11:56.358 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156226
}
'
2023-10-06 11:11:56.411 - debug: kecontact.0 (371943) Available surplus: 5068
2023-10-06 11:11:56.657 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:11:56.658 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156227
}
'
2023-10-06 11:11:56.659 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:12:26.056 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:12:26.058 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156256
}
'
2023-10-06 11:12:26.357 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:12:26.358 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156256
}
'
2023-10-06 11:12:26.433 - debug: kecontact.0 (371943) Available surplus: 5056
2023-10-06 11:12:26.656 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:12:26.658 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156257
}
'
2023-10-06 11:12:26.658 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:12:56.056 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:12:56.058 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156286
}
'
2023-10-06 11:12:56.356 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:12:56.357 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156286
}
'
2023-10-06 11:12:56.413 - debug: kecontact.0 (371943) Available surplus: 5316
2023-10-06 11:12:56.656 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:12:56.658 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156287
}
'
2023-10-06 11:12:56.658 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:12:58.191 - info: kecontact.0 (371943) change pause status of wallbox from true to false
2023-10-06 11:12:58.192 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:12:58.194 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156288
}
'
2023-10-06 11:12:58.492 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:12:58.494 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156288
}
'
2023-10-06 11:12:58.544 - debug: kecontact.0 (371943) Available surplus: 5366
2023-10-06 11:12:58.792 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:12:58.794 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156289
}
'
2023-10-06 11:12:58.794 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:13:17.552 - debug: kecontact.0 (371943) Sent 'stop ' to 192.168.188.97:7090
2023-10-06 11:13:17.553 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: 'TCH-ERR:: wrong parameter count
'
2023-10-06 11:13:17.554 - error: kecontact.0 (371943) Error received from wallbox: TCH-ERR:: wrong parameter count
2023-10-06 11:13:26.057 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:13:26.059 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156316
}
'
2023-10-06 11:13:26.358 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:13:26.359 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156316
}
'
2023-10-06 11:13:26.408 - debug: kecontact.0 (371943) Available surplus: 4769
2023-10-06 11:13:26.657 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:13:26.659 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156317
}
'
2023-10-06 11:13:26.659 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:13:56.057 - debug: kecontact.0 (371943) Sent 'report 2' to 192.168.188.97:7090
2023-10-06 11:13:56.059 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 156346
}
'
2023-10-06 11:13:56.357 - debug: kecontact.0 (371943) Sent 'report 3' to 192.168.188.97:7090
2023-10-06 11:13:56.359 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 6221,
"E total": 41143567,
"Serial": "22195027",
"Sec": 156346
}
'
2023-10-06 11:13:56.405 - debug: kecontact.0 (371943) Available surplus: 4873
2023-10-06 11:13:56.657 - debug: kecontact.0 (371943) Sent 'report 100' to 192.168.188.97:7090
2023-10-06 11:13:56.659 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 108,
"Curr HW": 16000,
"E start": 41137346,
"E pres": 6221,
"started[s]": 1696582765,
"ended[s]": 1696583179,
"started": "2023-10-06 08:59:25.000",
"ended": "2023-10-06 09:06:19.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "328c3604000000000000",
"Serial": "22195027",
"Sec": 156347
}
'
2023-10-06 11:13:56.660 - debug: kecontact.0 (371943) History ID received: 00
2023-10-06 11:14:07.601 - debug: kecontact.0 (371943) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-06 11:14:07.602 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-06 11:14:07.602 - debug: kecontact.0 (371943) Received TCH-OK :done
2023-10-06 11:14:08.051 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 1}'
2023-10-06 11:14:09.034 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"Max curr": 16000}'
2023-10-06 11:14:12.506 - debug: kecontact.0 (371943) UDP datagram from 192.168.188.97:7090: '{"State": 2}'

[Christian Kohlöffel]

@sneak-l8 Klar, ich hab nochmals ein Update im Code gemacht. Nun sollte wahrscheinlich beides funktionieren. Siehe Github ...

[Sneak-L8]

@christian-kohlöffel Hab den Merge gerade durchgeführt. D.h. die Wallbox war im beschrieben Fall (einer X-Sereis mit X2-Switch) nicht auf enabled, aber im State = 3? Das ist interessant. Denn eigentlich sagt der ena 0/ena 1 ja, ob geladen wird oder nicht. Und selbst wenn nicht geladen werdne soll (ena 0) ist currUser auf dem zuletzt eingestelten Wert.
Deshalb hatte ich auf den enabled-State abgefragt. Sonst wäre currUser immer 6 und er würde bei jeder Berechnung (alle 30 Sekunden) das Laden beenden wollen. Bei ena 0 ist die Stromstärke aber schon null und es ist kein stop-Kommando zu senden.
Es geht im Grund nur darum den "falschen" currUser-Wert auf 0 zu korrigieren, damit der Adapter nicht meint, die Ladung immer wieder stoppen zu müssen.
Oder liegt es an der Freigabe mit RFID und gar nicht an der X-Serie bzw. X2-Switch? Ist das ein weiterer Wert, der zu prüfen ist und aussagt, dass trotz currUser > 0 nicht geladen wird und die Ladung beim Aufruf mit regulateWallbox(0) nicht gestoppt werden muss?

[Sneak-L8]

@malz1902 Danke für Deine Infos.

Aber sollte die Wallbox dann nicht abschalten, da ja mehr als 1500 Watt aus dem Netz gezogen wird? Oder verssteh ich das falsch?

Korrekt. Da wäre dann das Debug-Log interessant.

Keba P90 x-series

Danke, das hilft die Box zu verstehen. Die DE-Edition hat z.B. kein EnergyMeter und ich muss die Leistung "raten". Dann können die Ursache für Fehlerverhalten ganz andere sein...

Auto is ein VW ID4

Danke, beim ID.3 gab es beim Update auf 3.2 das Problem, dass manche Fahrzeuge das PV-Laden nicht mehr mitmachten. Da musste erst ne Sicherung gezogen werden, damit das wieder funktioniert. Die hatten nach dem 1. Ladestopp einfachn icht mehr weitergeladen. Das hätte vielleicht auch beim ID.4 sein können. Aber vermutlich hat es andere Gründe (siehe weiter unten).

kecontact.0.state setzt sich dann auch von 3 was anscheinend laden ist auf 5 was für pausiert steht?

Ganz genau. 3 = Laden, 5 = Ladepause

setzte im iobroker im state kecontact.0.start meinen RFID Tag, das Laden startet.

Das war nochmal wichtig zu wissen. Nicht jeder schaltet seine Wallbox mit RFID frei (ich z.B. ). Das ist dann nochmal etwas, was gesondert zu beachten ist.

Warum das Laden bei pauseWallbox nicht stoppt, verstehe ich erst mal nicht. Da wäre es mir lieber, ich hätte alle Log-Einträge (am besten mit Debug) um den Zeitpunkt herum. Den Log-eintrag, den Du gepostet hat, zeigt nur, dass der Schalter gesetzt wurde. Mich würden aber auch die Logs davor und danach interessiert um zu sehen, was der Adapter gemacht hat oder zuminest versucht hat, zu machen.

Jetzt habe ich kecontact.0.stop wieder gelöscht

Das macht keinen Sinn, dann wird das Stop-Kommando ohne Parameter gesendet und führt zu der von Dir aufgeführtne Fehlermeldung. Das Kommando wird nur einmalig beim Schreiben des State gesendet und hat danach keine Bedeutung mehr. Du musst es nicht löschen.

Danach nochmal kecontact.0.start gespeichert, laden startet wieder

Genau, mit dem Beschreiben des State start wird der Ladevorgang (wieder) gestartet, der State stop darf ruhig gefüllt bleiben, es interessiert nur ein neues Schreiben des States (du kannst immer durch Schreiben Deines RFID in stop den Ladevorgang stoppen, auch wenn der Wert schon im State drinsteht).

Fazit: es ist nur komisch, warum der Ladevorgang mit pauseWallbox nicht unterbrochen wird.
Aber @Christian-Kohlöffel hat evtl. auch genau dazu schon den Fehler gefunden. Die neue Version steht bei github bereit. Bitte lade diese Mal und schaue, ob es damit funktioniert.
Es könnte genau das Problem sein. Interessant wäre, was bei Dir der state "enableUser" ist, wenn Du lädst oder ohne Freigabe mit "start" das Auto angestöpselt ist. Vermutlich stand im Log nach dem setzen von pauseWallbox kein weiterer Eintrag, der besagt, dass ein Kommando gesendet wurde.

Ich bin gespannt, was Du berichtest. Am liebsten erst nochmal mit der bestehenden Version anstecken und schauen, was "enableUser" macht und erst danach das Update machen und schauen, ob es damit geht.

[Sneak-L8]

@keksn puh, da bin ich gerade überfragt. Die Steuerung für die Batterie muss ich mir noch mal in Ruhe ansehen und dann die Modi implementieren, die weiter oben schon beschrieben und für gut befunden wurden.

[Malz1902]

@sneak-l8 Danke für deine Antworten, ich bin Montag/Dienstag unterwegs und komme erst Mittwoch dazu, melde mich dann.
Das Log wax ich gepostet hatte beinhaltete alles was im Log tand. Instanz stand auf Info für as Log, wie Du schreibst wenn ich pauseWallbox setze steht im Log das der Wert geändert wurde, mehr aber auch nicht.
Alle weiteren Infos folgen Mittwoch

[Malz1902]

@sneak-l8 said in [Frage] Realisierung Adapter UDP Keba Wallbox:

Danke, beim ID.3 gab es beim Update auf 3.2 das Problem, dass manche Fahrzeuge das PV-Laden nicht mehr mitmachten. Da musste erst ne Sicherung gezogen werden, damit das wieder funktioniert. Die hatten nach dem 1. Ladestopp einfachn icht mehr weitergeladen. Das hätte vielleicht auch beim ID.4 sein können. Aber vermutlich hat es andere Gründe (siehe weiter unten).

Mein Id4 hat übrigens noch Software Version 2.4

[Malz1902]

Kam heute schon dazu, Version hab ich nicht aktualisiert.

Auto nicht angeschlossen:
kecontact.0.enableSys false
kecontact.0.enableUser true
kecontact.0.state 1
kecontact.0.start RFID Tag und Class
kecontact.0.plug 3
kecontact.0.stop RDID Tag
kecontact.0.automatic.pauseWallbox false

Auto angeschlossen - keine Ladung
kecontact.0.enableSys false
kecontact.0.enableUser true
kecontact.0.state 1
kecontact.0.start RFID Tag und Class
kecontact.0.plug 7
kecontact.0.stop RDID Tag
kecontact.0.automatic.pauseWallbox false

Auto angeschlossen - Ladung 11:08:27
kecontact.0.enableSys true
kecontact.0.enableUser true
kecontact.0.state 3
kecontact.0.start RFID Tag und Class
kecontact.0.plug 7
kecontact.0.stop RDID Tag
kecontact.0.automatic.pauseWallbox false

2023-10-10 11:08:10.259 - debug: kecontact.0 (962275) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-10 11:08:10.260 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-10 11:08:10.260 - debug: kecontact.0 (962275) Received TCH-OK :done

Hier habe ich dann versucht pauseWallbox auf true zu setzen, Ladfung lief weiter

2023-10-10 11:10:21.464 - info: kecontact.0 (962275) change pause status of wallbox from false to true
2023-10-10 11:10:21.464 - debug: kecontact.0 (962275) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 11:10:21.467 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 332028
}
'
2023-10-10 11:10:21.764 - debug: kecontact.0 (962275) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 11:10:21.765 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 234,
"U2": 233,
"U3": 231,
"I1": 7833,
"I2": 7965,
"I3": 7994,
"P": 5523591,
"PF": 994,
"E pres": 1876,
"E total": 41336244,
"Serial": "22195027",
"Sec": 332028
}
'
2023-10-10 11:10:21.843 - debug: kecontact.0 (962275) Available surplus: 3401.5910000000003
2023-10-10 11:10:22.064 - debug: kecontact.0 (962275) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 11:10:22.066 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 123,
"Curr HW": 16000,
"E start": 41334368,
"E pres": 1883,
"started[s]": 1696928887,
"ended[s]": 0,
"started": "2023-10-10 09:08:07.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "48f3d718000000000000",
"Serial": "22195027",
"Sec": 332028
}
'
2023-10-10 11:10:22.066 - debug: kecontact.0 (962275) History ID received: 00
2023-10-10 11:10:25.394 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{"E pres": 1934}'
2023-10-10 11:10:27.129 - debug: kecontact.0 (962275) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 11:10:27.130 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 332033
}
'
2023-10-10 11:10:27.428 - debug: kecontact.0 (962275) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 11:10:27.430 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 234,
"U2": 233,
"U3": 231,
"I1": 7879,
"I2": 7983,
"I3": 7996,
"P": 5535206,
"PF": 994,
"E pres": 1963,
"E total": 41336331,
"Serial": "22195027",
"Sec": 332034
}
'
2023-10-10 11:10:27.476 - debug: kecontact.0 (962275) Available surplus: 3376.206
2023-10-10 11:10:27.728 - debug: kecontact.0 (962275) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 11:10:27.730 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 123,
"Curr HW": 16000,
"E start": 41334368,
"E pres": 1969,
"started[s]": 1696928887,
"ended[s]": 0,
"started": "2023-10-10 09:08:07.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "48f3d718000000000000",
"Serial": "22195027",
"Sec": 332034
}
'
2023-10-10 11:10:27.730 - debug: kecontact.0 (962275) History ID received: 00
2023-10-10 11:10:31.868 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{"E pres": 2034}'

Habe dann manuell gestoppt indem ich den RFID Tag unter stop gespeichert habe

2023-10-10 11:12:35.904 - debug: kecontact.0 (962275) Sent 'stop [d7703ef000000000]' to 192.168.188.97:7090
2023-10-10 11:12:35.905 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-10 11:12:35.905 - debug: kecontact.0 (962275) Received TCH-OK :done
2023-10-10 11:12:36.489 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 0}'
2023-10-10 11:12:36.491 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{"State": 5}'
2023-10-10 11:12:36.596 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: '{"Max curr": 0}'

kecontact.0.state 5
Habe dann wieder gestartet indem ich start erneut gespeichert habe

2023-10-10 11:13:51.415 - debug: kecontact.0 (962275) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-10 11:13:51.417 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-10 11:13:51.418 - debug: kecontact.0 (962275) Received TCH-OK :done

kecontact.0
	2023-10-10 11:14:27.483	info	vehicle (re)starts to charge
	

kecontact.0.state 3

Dann wieder gestoppt:

2023-10-10 11:15:07.264 - debug: kecontact.0 (962275) Sent 'stop [d7703ef000000000]' to 192.168.188.97:7090
2023-10-10 11:15:07.266 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-10 11:15:07.266 - debug: kecontact.0 (962275) Received TCH-OK :done

kecontact.0.state 5
Jetzt wollte ich wieder starten, jedoch geht ein start nicht mehr

2023-10-10 11:15:46.809 - debug: kecontact.0 (962275) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-10 11:15:46.810 - debug: kecontact.0 (962275) UDP datagram from 192.168.188.97:7090: 'TCH-ERR:no need for start
'
2023-10-10 11:15:46.811 - error: kecontact.0 (962275) Error received from wallbox: TCH-ERR:no need for start

kecontact.0.enableUser stand immer auf true

Hier hilft dann nur eijnmal manuell Kabel aus dem Auto und wieder rein

40

Log-Größe: 444.1 KB
Zeit
	
Nachricht
kecontact.0
	2023-10-10 11:28:25.178	info	vehicle plugged to wallbox
kecontact.0
	2023-10-10 11:28:21.809	info	vehicle unplugged from wallbox

Adapter einmal von GitHub aktualsiert

2023-10-10 11:31:34.896 - debug: kecontact.0 (973352) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-10 11:31:34.897 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-10 11:31:34.897 - debug: kecontact.0 (973352) Received TCH-OK :done
2023-10-10 11:31:35.257 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 1}'
2023-10-10 11:31:36.623 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"Max curr": 16000}'
2023-10-10 11:31:39.952 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"State": 2}'
2023-10-10 11:31:41.204 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"State": 3}'
2023-10-10 11:31:46.419 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 60}'
2023-10-10 11:31:52.896 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 160}'
2023-10-10 11:31:59.370 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 260}'
2023-10-10 11:32:03.996 - debug: kecontact.0 (973352) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 11:32:03.998 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 333330
}
'
2023-10-10 11:32:04.296 - debug: kecontact.0 (973352) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 11:32:04.297 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 235,
"U2": 234,
"U3": 233,
"I1": 7855,
"I2": 7944,
"I3": 7925,
"P": 5546558,
"PF": 994,
"E pres": 334,
"E total": 41339675,
"Serial": "22195027",
"Sec": 333331
}
'
2023-10-10 11:32:04.343 - info: kecontact.0 (973352) vehicle (re)starts to charge
2023-10-10 11:32:04.343 - debug: kecontact.0 (973352) Available surplus: 3782.558
2023-10-10 11:32:04.596 - debug: kecontact.0 (973352) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 11:32:04.598 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 125,
"Curr HW": 16000,
"E start": 41339341,
"E pres": 340,
"started[s]": 1696930291,
"ended[s]": 0,
"started": "2023-10-10 09:31:31.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "fd61ed18000000000000",
"Serial": "22195027",
"Sec": 333331
}
'
2023-10-10 11:32:04.598 - debug: kecontact.0 (973352) History ID received: 00
2023-10-10 11:32:05.842 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 359}'
2023-10-10 11:32:12.318 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 459}'
2023-10-10 11:32:18.794 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 559}'

2023-10-10 11:33:20.435 - info: kecontact.0 (973352) change pause status of wallbox from false to true
2023-10-10 11:33:20.435 - debug: kecontact.0 (973352) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 11:33:20.437 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 333407
}
'
2023-10-10 11:33:20.735 - debug: kecontact.0 (973352) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 11:33:20.737 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 233,
"U2": 232,
"U3": 233,
"I1": 7905,
"I2": 8000,
"I3": 7947,
"P": 5534025,
"PF": 995,
"E pres": 1512,
"E total": 41340853,
"Serial": "22195027",
"Sec": 333407
}
'
2023-10-10 11:33:20.883 - debug: kecontact.0 (973352) Available surplus: 3562.0249999999996
2023-10-10 11:33:21.035 - debug: kecontact.0 (973352) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 11:33:21.037 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 125,
"Curr HW": 16000,
"E start": 41339341,
"E pres": 1518,
"started[s]": 1696930291,
"ended[s]": 0,
"started": "2023-10-10 09:31:31.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "fd61ed18000000000000",
"Serial": "22195027",
"Sec": 333407
}
'
2023-10-10 11:33:21.038 - debug: kecontact.0 (973352) History ID received: 00
2023-10-10 11:33:23.753 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 1560}'
2023-10-10 11:33:30.227 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 1660}'
2023-10-10 11:33:33.996 - debug: kecontact.0 (973352) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 11:33:33.997 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 333420
}
'
2023-10-10 11:33:34.297 - debug: kecontact.0 (973352) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 11:33:34.298 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 230,
"U2": 233,
"U3": 234,
"I1": 8008,
"I2": 7972,
"I3": 7926,
"P": 5512907,
"PF": 994,
"E pres": 1721,
"E total": 41341062,
"Serial": "22195027",
"Sec": 333421
}
'
2023-10-10 11:33:34.346 - debug: kecontact.0 (973352) Available surplus: 3476.907
2023-10-10 11:33:34.597 - debug: kecontact.0 (973352) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 11:33:34.599 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 125,
"Curr HW": 16000,
"E start": 41339341,
"E pres": 1724,
"started[s]": 1696930291,
"ended[s]": 0,
"started": "2023-10-10 09:31:31.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "fd61ed18000000000000",
"Serial": "22195027",
"Sec": 333421
}
'
2023-10-10 11:33:34.599 - debug: kecontact.0 (973352) History ID received: 00
2023-10-10 11:33:36.702 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 1759}'

Auch jetzt wird noch weiter geladen, alo pauseWallbox hat immer noch keine Auswirkung

Dann habe ich wieder stop gespeichert, dann wieder start, dann wieder stop, bis hier gib wieder alles und ein 3. start geht dann nicht mehr

2023-10-10 11:35:04.599 - debug: kecontact.0 (973352) History ID received: 00
2023-10-10 11:35:07.361 - debug: kecontact.0 (973352) Sent 'stop [d7703ef000000000]' to 192.168.188.97:7090
2023-10-10 11:35:07.362 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-10 11:35:07.362 - debug: kecontact.0 (973352) Received TCH-OK :done
2023-10-10 11:35:07.709 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 0}'
2023-10-10 11:35:07.711 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"State": 5}'
2023-10-10 11:35:07.787 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"Max curr": 0}'
2023-10-10 11:35:07.787 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 3160}'
2023-10-10 11:35:25.205 - debug: kecontact.0 (973352) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-10 11:35:25.206 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-10 11:35:25.207 - debug: kecontact.0 (973352) Received TCH-OK :done
2023-10-10 11:35:25.536 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 1}'
2023-10-10 11:35:26.505 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"Max curr": 16000}'
2023-10-10 11:35:29.977 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"State": 2}'
2023-10-10 11:35:31.086 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"State": 3}'
2023-10-10 11:35:33.997 - debug: kecontact.0 (973352) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 11:35:33.999 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 333540
}
'
2023-10-10 11:35:34.297 - debug: kecontact.0 (973352) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 11:35:34.299 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 233,
"U2": 234,
"U3": 234,
"I1": 6751,
"I2": 6221,
"I3": 7628,
"P": 5369865,
"PF": 988,
"E pres": 7,
"E total": 41342520,
"Serial": "22195027",
"Sec": 333541
}
'
2023-10-10 11:35:34.350 - debug: kecontact.0 (973352) Available surplus: 5600.865
2023-10-10 11:35:34.597 - debug: kecontact.0 (973352) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 11:35:34.599 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 126,
"Curr HW": 16000,
"E start": 41342513,
"E pres": 13,
"started[s]": 1696930522,
"ended[s]": 0,
"started": "2023-10-10 09:35:22.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "53e5f018000000000000",
"Serial": "22195027",
"Sec": 333541
}
'
2023-10-10 11:35:34.599 - debug: kecontact.0 (973352) History ID received: 00
2023-10-10 11:35:39.365 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 87}'
2023-10-10 11:35:45.840 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"E pres": 187}'
2023-10-10 11:35:50.270 - debug: kecontact.0 (973352) Sent 'stop [d7703ef000000000]' to 192.168.188.97:7090
2023-10-10 11:35:50.271 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: 'TCH-OK :done
'
2023-10-10 11:35:50.271 - debug: kecontact.0 (973352) Received TCH-OK :done
2023-10-10 11:35:50.590 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"Enable sys": 0}'
2023-10-10 11:35:50.592 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"State": 5}'
2023-10-10 11:35:50.646 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{"Max curr": 0}'
2023-10-10 11:36:03.996 - debug: kecontact.0 (973352) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 11:36:03.998 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 5,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 1,
"Enable sys": 0,
"Enable user": 1,
"Max curr": 0,
"Max curr %": 1000,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 333570
}
'
2023-10-10 11:36:04.296 - debug: kecontact.0 (973352) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 11:36:04.298 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 0,
"U2": 0,
"U3": 0,
"I1": 0,
"I2": 0,
"I3": 0,
"P": 0,
"PF": 0,
"E pres": 272,
"E total": 41342785,
"Serial": "22195027",
"Sec": 333571
}
'
2023-10-10 11:36:04.349 - debug: kecontact.0 (973352) Available surplus: 3535
2023-10-10 11:36:04.596 - debug: kecontact.0 (973352) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 11:36:04.598 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 126,
"Curr HW": 16000,
"E start": 41342513,
"E pres": 272,
"started[s]": 1696930522,
"ended[s]": 1696930548,
"started": "2023-10-10 09:35:22.000",
"ended": "2023-10-10 09:35:48.000",
"reason": 4,
"timeQ": 3,
"RFID tag": "0d7703ef00000000",
"RFID class": "53e5f018000000000000",
"Serial": "22195027",
"Sec": 333571
}
'
2023-10-10 11:36:04.598 - debug: kecontact.0 (973352) History ID received: 00
2023-10-10 11:36:10.544 - debug: kecontact.0 (973352) Sent 'start [d7703ef000000000] [d029847f000000000000]' to 192.168.188.97:7090
2023-10-10 11:36:10.545 - debug: kecontact.0 (973352) UDP datagram from 192.168.188.97:7090: 'TCH-ERR:no need for start
'
2023-10-10 11:36:10.546 - error: kecontact.0 (973352) Error received from wallbox: TCH-ERR:no need for start

[Malz1902]

Sample: To charge your vehicle with a constant amperage of 6A regardless of surplus, set photovoltaics to false and limitCurrent to 6000.

slebst das hat wohl keine auswirkungen

2023-10-10 13:54:53.529 - info: kecontact.0 (984794) change of photovoltaics automatic from true to false
2023-10-10 13:54:53.529 - debug: kecontact.0 (984794) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 13:54:53.531 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 341900
}
'
2023-10-10 13:54:53.830 - debug: kecontact.0 (984794) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 13:54:53.831 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 236,
"U2": 234,
"U3": 233,
"I1": 15473,
"I2": 15518,
"I3": 15495,
"P": 10897861,
"PF": 998,
"E pres": 126260,
"E total": 41469045,
"Serial": "22195027",
"Sec": 341900
}
'
2023-10-10 13:54:53.880 - debug: kecontact.0 (984794) Available surplus: 4533.861000000001
2023-10-10 13:54:54.130 - debug: kecontact.0 (984794) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 13:54:54.132 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 127,
"Curr HW": 16000,
"E start": 41342785,
"E pres": 126273,
"started[s]": 1696930870,
"ended[s]": 0,
"started": "2023-10-10 09:41:10.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "f337f618000000000000",
"Serial": "22195027",
"Sec": 341900
}
'
2023-10-10 13:54:54.132 - debug: kecontact.0 (984794) History ID received: 00
2023-10-10 13:54:55.590 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 126317}'
2023-10-10 13:54:58.934 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 126419}'
2023-10-10 13:54:59.645 - debug: kecontact.0 (984794) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 13:54:59.647 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 341906
}
'
2023-10-10 13:54:59.946 - debug: kecontact.0 (984794) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 13:54:59.948 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 236,
"U2": 234,
"U3": 233,
"I1": 15466,
"I2": 15518,
"I3": 15470,
"P": 10893777,
"PF": 998,
"E pres": 126444,
"E total": 41469229,
"Serial": "22195027",
"Sec": 341906
}
'
2023-10-10 13:54:59.989 - debug: kecontact.0 (984794) Available surplus: 4532.777
2023-10-10 13:55:00.247 - debug: kecontact.0 (984794) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 13:55:00.249 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 127,
"Curr HW": 16000,
"E start": 41342785,
"E pres": 126457,
"started[s]": 1696930870,
"ended[s]": 0,
"started": "2023-10-10 09:41:10.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "f337f618000000000000",
"Serial": "22195027",
"Sec": 341906
}
'
2023-10-10 13:55:00.249 - debug: kecontact.0 (984794) History ID received: 00
2023-10-10 13:55:02.277 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 126520}'
2023-10-10 13:55:05.411 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 126615}'
2023-10-10 13:55:08.755 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 126716}'
2023-10-10 13:55:12.096 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 126817}'
2023-10-10 13:55:15.439 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 126919}'
2023-10-10 13:55:18.781 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127020}'
2023-10-10 13:55:21.917 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127115}'
2023-10-10 13:55:25.260 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127216}'
2023-10-10 13:55:28.603 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127318}'
2023-10-10 13:55:29.645 - debug: kecontact.0 (984794) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 13:55:29.647 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 341936
}
'
2023-10-10 13:55:29.945 - debug: kecontact.0 (984794) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 13:55:29.947 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 236,
"U2": 234,
"U3": 233,
"I1": 15448,
"I2": 15522,
"I3": 15493,
"P": 10908070,
"PF": 998,
"E pres": 127356,
"E total": 41470141,
"Serial": "22195027",
"Sec": 341936
}
'
2023-10-10 13:55:30.041 - debug: kecontact.0 (984794) Available surplus: 4575.07
2023-10-10 13:55:30.245 - debug: kecontact.0 (984794) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 13:55:30.247 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 127,
"Curr HW": 16000,
"E start": 41342785,
"E pres": 127362,
"started[s]": 1696930870,
"ended[s]": 0,
"started": "2023-10-10 09:41:10.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "f337f618000000000000",
"Serial": "22195027",
"Sec": 341936
}
'
2023-10-10 13:55:30.247 - debug: kecontact.0 (984794) History ID received: 00
2023-10-10 13:55:31.946 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127419}'
2023-10-10 13:55:35.291 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127520}'
2023-10-10 13:55:38.426 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127615}'
2023-10-10 13:55:41.770 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127716}'
2023-10-10 13:55:45.114 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127818}'
2023-10-10 13:55:48.457 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 127919}'
2023-10-10 13:55:51.800 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128020}'
2023-10-10 13:55:54.935 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128115}'
2023-10-10 13:55:58.278 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128216}'
2023-10-10 13:55:59.645 - debug: kecontact.0 (984794) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 13:55:59.647 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 341966
}
'
2023-10-10 13:55:59.945 - debug: kecontact.0 (984794) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 13:55:59.946 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 236,
"U2": 234,
"U3": 232,
"I1": 15465,
"I2": 15521,
"I3": 15492,
"P": 10884692,
"PF": 999,
"E pres": 128267,
"E total": 41471052,
"Serial": "22195027",
"Sec": 341966
}
'
2023-10-10 13:55:59.997 - debug: kecontact.0 (984794) Available surplus: 4572.691999999999
2023-10-10 13:56:00.245 - debug: kecontact.0 (984794) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 13:56:00.247 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 127,
"Curr HW": 16000,
"E start": 41342785,
"E pres": 128273,
"started[s]": 1696930870,
"ended[s]": 0,
"started": "2023-10-10 09:41:10.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "f337f618000000000000",
"Serial": "22195027",
"Sec": 341966
}
'
2023-10-10 13:56:00.247 - debug: kecontact.0 (984794) History ID received: 00
2023-10-10 13:56:01.622 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128317}'
2023-10-10 13:56:04.966 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128418}'
2023-10-10 13:56:08.310 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128520}'
2023-10-10 13:56:11.654 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128621}'
2023-10-10 13:56:14.788 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128716}'
2023-10-10 13:56:18.132 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128817}'
2023-10-10 13:56:21.476 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 128918}'
2023-10-10 13:56:24.820 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129020}'
2023-10-10 13:56:27.955 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129115}'
2023-10-10 13:56:29.645 - debug: kecontact.0 (984794) Sent 'report 2' to 192.168.188.97:7090
2023-10-10 13:56:29.647 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "2",
"State": 3,
"Error1": 0,
"Error2": 0,
"Plug": 7,
"AuthON": 1,
"Authreq": 0,
"Enable sys": 1,
"Enable user": 1,
"Max curr": 16000,
"Max curr %": 266,
"Curr HW": 16000,
"Curr user": 63000,
"Curr FS": 0,
"Tmo FS": 0,
"Curr timer": 0,
"Tmo CT": 0,
"Setenergy": 0,
"Output": 0,
"Input": 0,
"Serial": "22195027",
"Sec": 341996
}
'
2023-10-10 13:56:29.945 - debug: kecontact.0 (984794) Sent 'report 3' to 192.168.188.97:7090
2023-10-10 13:56:29.947 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "3",
"U1": 236,
"U2": 234,
"U3": 233,
"I1": 15457,
"I2": 15531,
"I3": 15493,
"P": 10908904,
"PF": 999,
"E pres": 129171,
"E total": 41471956,
"Serial": "22195027",
"Sec": 341996
}
'
2023-10-10 13:56:29.992 - debug: kecontact.0 (984794) Available surplus: 4555.904
2023-10-10 13:56:30.245 - debug: kecontact.0 (984794) Sent 'report 100' to 192.168.188.97:7090
2023-10-10 13:56:30.247 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{
"ID": "100",
"Session ID": 127,
"Curr HW": 16000,
"E start": 41342785,
"E pres": 129184,
"started[s]": 1696930870,
"ended[s]": 0,
"started": "2023-10-10 09:41:10.000",
"ended": "0",
"reason": 5,
"timeQ": 0,
"RFID tag": "0d7703ef00000000",
"RFID class": "f337f618000000000000",
"Serial": "22195027",
"Sec": 341996
}
'
2023-10-10 13:56:30.247 - debug: kecontact.0 (984794) History ID received: 00
2023-10-10 13:56:31.298 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129216}'
2023-10-10 13:56:34.642 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129317}'
2023-10-10 13:56:37.985 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129418}'
2023-10-10 13:56:41.329 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129520}'
2023-10-10 13:56:44.463 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129615}'
2023-10-10 13:56:47.808 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129716}'
2023-10-10 13:56:51.150 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129817}'
2023-10-10 13:56:54.495 - debug: kecontact.0 (984794) UDP datagram from 192.168.188.97:7090: '{"E pres": 129919}'

[Malz1902]

ich bin einfach nur DUMM!!!!

Checkbox passiv raus und schon klappt alles

[Malz1902]

Ich habe nun ne PV Erzeugung von 3658 Watt.
Aus dem Netz ziehe ich 1748 Watt
Die Wallbox zieht 4192 Watt

Jetzt möchte ich, dass wenn aus dem Netz mehr als 2500 Watt gezogen werden die Ladung pausiert.

Ist das so richtig?