Jahresrückblick 2025 – unser neuer Blogbeitrag ist online! ✨

[JosefThal]

@mickym said in

[JosefThal]

@josefthal

[JosefThal]

@josefthal
ich bin Leider nicht so gut in deutsch nur das du es mal weist

mqtt in wollte ich die daten auslesen und zwar switsch ein und zwei

dann wollte ich irgenwie einen Timer laufen lassen das ich das relais ansteuern kann

deswegen habe ich den swtich und relais getrennt das die nicht mehr miteinander schalten

[mickym]

@josefthal Na ja ich dachte eigentlich, dass unter stat auch noch ein topic kommt. Der tele Ast wird halt immer periodisch ausgelesen . Ich würde Dir halt einen stat topic empfehlen, anstelle des sensors. - Aber gut machen wir es halt mal mit dem sensor.

Da Du beides über ON/OFF machen kannst - nimmst Du halt ggf. eine trigger Node als Timer.

[JosefThal]

@mickym was ist besser

[mickym]

@josefthal Unter stat das topic ist immer zu bevorzugen -da dies sofort reagiert und ereignisgesteuert reagiert. tele sendet immer wieder die gleiche Info periodisch.

Das wäre jetzt ein Vorschlag.

Spoiler

[
   {
       "id": "6834318dc45a0ebd",
       "type": "mqtt in",
       "z": "7e6af0015415146d",
       "name": "",
       "topic": "tele/Tasmota_test2/SENSOR",
       "qos": "2",
       "datatype": "auto-detect",
       "broker": "be6c1eaab0dff4fe",
       "nl": false,
       "rap": true,
       "rh": 0,
       "inputs": 0,
       "x": 290,
       "y": 2680,
       "wires": [
           [
               "6fc3625d1356f43f"
           ]
       ]
   },
   {
       "id": "6fc3625d1356f43f",
       "type": "switch",
       "z": "7e6af0015415146d",
       "name": "",
       "property": "payload.Switch1",
       "propertyType": "msg",
       "rules": [
           {
               "t": "eq",
               "v": "ON",
               "vt": "str"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 1,
       "x": 490,
       "y": 2680,
       "wires": [
           [
               "f497f1d99df9b41e"
           ]
       ]
   },
   {
       "id": "f497f1d99df9b41e",
       "type": "trigger",
       "z": "7e6af0015415146d",
       "name": "",
       "op1": "ON",
       "op2": "OFF",
       "op1type": "str",
       "op2type": "str",
       "duration": "1",
       "extend": false,
       "overrideDelay": false,
       "units": "hr",
       "reset": "",
       "bytopic": "all",
       "topic": "topic",
       "outputs": 1,
       "x": 650,
       "y": 2680,
       "wires": [
           [
               "077c323c108037c0"
           ]
       ]
   },
   {
       "id": "077c323c108037c0",
       "type": "mqtt out",
       "z": "7e6af0015415146d",
       "name": "",
       "topic": "cmnd/Tasmota_test2/POWER1",
       "qos": "",
       "retain": "",
       "respTopic": "",
       "contentType": "",
       "userProps": "",
       "correl": "",
       "expiry": "",
       "broker": "be6c1eaab0dff4fe",
       "x": 890,
       "y": 2680,
       "wires": []
   },
   {
       "id": "be6c1eaab0dff4fe",
       "type": "mqtt-broker",
       "name": "",
       "broker": "localhost",
       "port": "1883",
       "clientid": "mqttClientNodeRedTest",
       "autoConnect": true,
       "usetls": false,
       "protocolVersion": "4",
       "keepalive": "60",
       "cleansession": true,
       "birthTopic": "",
       "birthQos": "0",
       "birthPayload": "",
       "birthMsg": {},
       "closeTopic": "",
       "closeQos": "0",
       "closePayload": "",
       "closeMsg": {},
       "willTopic": "",
       "willQos": "0",
       "willPayload": "",
       "willMsg": {},
       "userProps": "",
       "sessionExpiry": ""
   }
]

[JosefThal]

@josefthal [
{
"id": "f884ce11d9d7f084",
"type": "tab",
"label": "Flow 7",
"disabled": false,
"info": "",
"env": []
},
{
"id": "50abe2e8af7541c0",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 45",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 940,
"y": 400,
"wires": []
},
{
"id": "2ae715d42c837120",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 46",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 660,
"y": 300,
"wires": []
},
{
"id": "1d78f8b2a54f18bd",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 47",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 760,
"y": 200,
"wires": []
},
{
"id": "4b419759b1939781",
"type": "mqtt in",
"z": "f884ce11d9d7f084",
"name": "",
"topic": "tele/Tasmota_test2/SENSOR",
"qos": "0",
"datatype": "json",
"broker": "b84a725bf6dd8e6b",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 160,
"y": 200,
"wires": [
[
"1d78f8b2a54f18bd",
"5767de948061f591",
"4fe0cb071a28c291"
]
]
},
{
"id": "3f94cadf66b7c243",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 48",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 820,
"y": 740,
"wires": []
},
{
"id": "85752b032892a0bf",
"type": "mqtt in",
"z": "f884ce11d9d7f084",
"name": "",
"topic": "tele/Tasmota_test2/SENSOR ",
"qos": "0",
"datatype": "utf8",
"broker": "b84a725bf6dd8e6b",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 200,
"y": 780,
"wires": [
[
"3f94cadf66b7c243",
"a4c8f372f7e5208d"
]
]
},
{
"id": "a4c8f372f7e5208d",
"type": "change",
"z": "f884ce11d9d7f084",
"name": "Strom Filter",
"rules": [
{
"t": "set",
"p": "payload.Switch1",
"pt": "msg",
"to": "on",
"tot": "str"
}
],
"action": "",
"property": "",
"from": "",
"to": "",
"reg": false,
"x": 690,
"y": 800,
"wires": [
[
"62298753547437f4"
]
]
},
{
"id": "62298753547437f4",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 49",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 940,
"y": 820,
"wires": []
},
{
"id": "5d69362e4fbdf5e3",
"type": "mqtt out",
"z": "f884ce11d9d7f084",
"name": "",
"topic": "cmnd/Tasmota_test2/POWER1",
"qos": "",
"retain": "",
"respTopic": "",
"contentType": "",
"userProps": "",
"correl": "",
"expiry": "",
"broker": "b84a725bf6dd8e6b",
"x": 630,
"y": 560,
"wires": []
},
{
"id": "3407d481c1a27b47",
"type": "Tasmota Sensor",
"z": "f884ce11d9d7f084",
"broker": "7a7b311bf649aa87",
"device": "Tasmota_test2",
"name": "",
"outputs": 1,
"uidisabler": false,
"fullTopic": "",
"cmndPrefix": "",
"statPrefix": "",
"telePrefix": "",
"qos": 1,
"retain": false,
"rules": [],
"outputTopic": "",
"x": 220,
"y": 80,
"wires": [
[
"dc357bf80dd84722"
]
]
},
{
"id": "4a52a2c387ec9267",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 50",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 940,
"y": 460,
"wires": []
},
{
"id": "dc357bf80dd84722",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 51",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 420,
"y": 20,
"wires": []
},
{
"id": "8edf93019b1dda14",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 52",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 760,
"y": 240,
"wires": []
},
{
"id": "2ae5cbaad2be8669",
"type": "inject",
"z": "f884ce11d9d7f084",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "off",
"payloadType": "str",
"x": 190,
"y": 580,
"wires": [
[
"5d69362e4fbdf5e3"
]
]
},
{
"id": "fe76fb3e70ee4cd1",
"type": "inject",
"z": "f884ce11d9d7f084",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "on",
"payloadType": "str",
"x": 190,
"y": 620,
"wires": [
[
"5d69362e4fbdf5e3"
]
]
},
{
"id": "5767de948061f591",
"type": "switch",
"z": "f884ce11d9d7f084",
"name": "",
"property": "payload.Switch1",
"propertyType": "msg",
"rules": [
{
"t": "eq",
"v": "on",
"vt": "str"
}
],
"checkall": "true",
"repair": false,
"outputs": 1,
"x": 450,
"y": 300,
"wires": [
[
"2ae715d42c837120"
]
]
},
{
"id": "970c70446706d958",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 55",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 660,
"y": 360,
"wires": []
},
{
"id": "4fe0cb071a28c291",
"type": "switch",
"z": "f884ce11d9d7f084",
"name": "",
"property": "payload.Switch1",
"propertyType": "msg",
"rules": [
{
"t": "eq",
"v": "off",
"vt": "str"
}
],
"checkall": "true",
"repair": false,
"outputs": 1,
"x": 450,
"y": 360,
"wires": [
[
"970c70446706d958"
]
]
},
{
"id": "b84a725bf6dd8e6b",
"type": "mqtt-broker",
"name": "CerboGX",
"broker": "192.168.178.35",
"port": "1883",
"clientid": "",
"autoConnect": true,
"usetls": false,
"protocolVersion": "4",
"keepalive": "60",
"cleansession": true,
"birthTopic": "",
"birthQos": "0",
"birthPayload": "",
"birthMsg": {},
"closeTopic": "",
"closeQos": "0",
"closePayload": "",
"closeMsg": {},
"willTopic": "",
"willQos": "0",
"willPayload": "",
"willMsg": {},
"userProps": "",
"sessionExpiry": ""
},
{
"id": "7a7b311bf649aa87",
"type": "tasmota-mqtt-broker",
"name": "",
"broker": "localhost",
"port": "1883",
"clientid": "",
"usetls": false,
"keepalive": "60",
"cleansession": true
}
]

[mickym]

@josefthal Damit kann man nichts anfangen. Bitte immer in CodeTags einstellen und ggf. mit Spoiler:

Spoiler

code_text

Den Code hier direkt einzustellen - ist nicht importierbar - da das vom Browser interpretiert wird

[JosefThal]

@mickym ```
[
{
"id": "f884ce11d9d7f084",
"type": "tab",
"label": "Flow 7",
"disabled": false,
"info": "",
"env": []
},
{
"id": "50abe2e8af7541c0",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 45",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 940,
"y": 400,
"wires": []
},
{
"id": "2ae715d42c837120",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 46",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 660,
"y": 300,
"wires": []
},
{
"id": "1d78f8b2a54f18bd",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 47",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 760,
"y": 200,
"wires": []
},
{
"id": "4b419759b1939781",
"type": "mqtt in",
"z": "f884ce11d9d7f084",
"name": "",
"topic": "tele/Tasmota_test2/SENSOR",
"qos": "0",
"datatype": "json",
"broker": "b84a725bf6dd8e6b",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 160,
"y": 200,
"wires": [
[
"1d78f8b2a54f18bd",
"5767de948061f591",
"4fe0cb071a28c291"
]
]
},
{
"id": "3f94cadf66b7c243",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 48",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 820,
"y": 740,
"wires": []
},
{
"id": "85752b032892a0bf",
"type": "mqtt in",
"z": "f884ce11d9d7f084",
"name": "",
"topic": "tele/Tasmota_test2/SENSOR ",
"qos": "0",
"datatype": "utf8",
"broker": "b84a725bf6dd8e6b",
"nl": false,
"rap": true,
"rh": 0,
"inputs": 0,
"x": 200,
"y": 780,
"wires": [
[
"3f94cadf66b7c243",
"a4c8f372f7e5208d"
]
]
},
{
"id": "a4c8f372f7e5208d",
"type": "change",
"z": "f884ce11d9d7f084",
"name": "Strom Filter",
"rules": [
{
"t": "set",
"p": "payload.Switch1",
"pt": "msg",
"to": "on",
"tot": "str"
}
],
"action": "",
"property": "",
"from": "",
"to": "",
"reg": false,
"x": 690,
"y": 800,
"wires": [
[
"62298753547437f4"
]
]
},
{
"id": "62298753547437f4",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 49",
"active": false,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 940,
"y": 820,
"wires": []
},
{
"id": "5d69362e4fbdf5e3",
"type": "mqtt out",
"z": "f884ce11d9d7f084",
"name": "",
"topic": "cmnd/Tasmota_test2/POWER1",
"qos": "",
"retain": "",
"respTopic": "",
"contentType": "",
"userProps": "",
"correl": "",
"expiry": "",
"broker": "b84a725bf6dd8e6b",
"x": 630,
"y": 560,
"wires": []
},
{
"id": "3407d481c1a27b47",
"type": "Tasmota Sensor",
"z": "f884ce11d9d7f084",
"broker": "7a7b311bf649aa87",
"device": "Tasmota_test2",
"name": "",
"outputs": 1,
"uidisabler": false,
"fullTopic": "",
"cmndPrefix": "",
"statPrefix": "",
"telePrefix": "",
"qos": 1,
"retain": false,
"rules": [],
"outputTopic": "",
"x": 220,
"y": 80,
"wires": [
[
"dc357bf80dd84722"
]
]
},
{
"id": "4a52a2c387ec9267",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 50",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 940,
"y": 460,
"wires": []
},
{
"id": "dc357bf80dd84722",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 51",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 420,
"y": 20,
"wires": []
},
{
"id": "8edf93019b1dda14",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 52",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 760,
"y": 240,
"wires": []
},
{
"id": "2ae5cbaad2be8669",
"type": "inject",
"z": "f884ce11d9d7f084",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "off",
"payloadType": "str",
"x": 190,
"y": 580,
"wires": [
[
"5d69362e4fbdf5e3"
]
]
},
{
"id": "fe76fb3e70ee4cd1",
"type": "inject",
"z": "f884ce11d9d7f084",
"name": "",
"props": [
{
"p": "payload"
},
{
"p": "topic",
"vt": "str"
}
],
"repeat": "",
"crontab": "",
"once": false,
"onceDelay": 0.1,
"topic": "",
"payload": "on",
"payloadType": "str",
"x": 190,
"y": 620,
"wires": [
[
"5d69362e4fbdf5e3"
]
]
},
{
"id": "5767de948061f591",
"type": "switch",
"z": "f884ce11d9d7f084",
"name": "",
"property": "payload.Switch1",
"propertyType": "msg",
"rules": [
{
"t": "eq",
"v": "on",
"vt": "str"
}
],
"checkall": "true",
"repair": false,
"outputs": 1,
"x": 450,
"y": 300,
"wires": [
[
"2ae715d42c837120"
]
]
},
{
"id": "970c70446706d958",
"type": "debug",
"z": "f884ce11d9d7f084",
"name": "debug 55",
"active": true,
"tosidebar": true,
"console": false,
"tostatus": false,
"complete": "false",
"statusVal": "",
"statusType": "auto",
"x": 660,
"y": 360,
"wires": []
},
{
"id": "4fe0cb071a28c291",
"type": "switch",
"z": "f884ce11d9d7f084",
"name": "",
"property": "payload.Switch1",
"propertyType": "msg",
"rules": [
{
"t": "eq",
"v": "off",
"vt": "str"
}
],
"checkall": "true",
"repair": false,
"outputs": 1,
"x": 450,
"y": 360,
"wires": [
[
"970c70446706d958"
]
]
},
{
"id": "b84a725bf6dd8e6b",
"type": "mqtt-broker",
"name": "CerboGX",
"broker": "192.168.178.35",
"port": "1883",
"clientid": "",
"autoConnect": true,
"usetls": false,
"protocolVersion": "4",
"keepalive": "60",
"cleansession": true,
"birthTopic": "",
"birthQos": "0",
"birthPayload": "",
"birthMsg": {},
"closeTopic": "",
"closeQos": "0",
"closePayload": "",
"closeMsg": {},
"willTopic": "",
"willQos": "0",
"willPayload": "",
"willMsg": {},
"userProps": "",
"sessionExpiry": ""
},
{
"id": "7a7b311bf649aa87",
"type": "tasmota-mqtt-broker",
"name": "",
"broker": "localhost",
"port": "1883",
"clientid": "",
"usetls": false,
"keepalive": "60",
"cleansession": true
}
]

[mickym]

@josefthal Nein in codetags - die ''' müssen in einer extra Zeile stehen

code_text

[JosefThal]

@mickym flows(3).json

[JosefThal]

@josefthal

hoffe es geht so

bin einfach zu dof ( ICH )

[mickym]

@josefthal Ja geht schon - ich hab Dir aber doch hier einen Vorschlag zum Import eingestellt: https://forum.iobroker.net/post/1053445

[mickym]

@josefthal sagte in Node Red Tasmota und Switsch:
So zu Deinen Fehler die ich sehe

Die Eigenschaft ist richtig, aber Du musst auf Groß-und Kleinschreibung achten. Es kommt - auf der KONSOLE ein "ON" und kein "on".

Dann brauchst Du dafür keine 2 switch Nodes - sondern ein mit 2 Ausgängen.

Bei der Eingabe ist tasmota nicht case-sensitiv - das heißt wird automatisch verstanden.

Aber wie gesagt ich hab Dir einen Vorschlag unten geschickt.

[JosefThal]

@mickym Danke

hat ein fehler beim Übertragen gegeben groß und kleinschreibung

sensor muß Groß sein SENSOR

und dann ging es

und ich Spiele und Lesen ca 2 wochen rum

und du machst es in 30 S

[mickym]

@josefthal sagte in Node Red Tasmota und Switsch:

und du machst es in 30 S

Mit etwas Übung schaffst Du das auch. ;)

[JosefThal]

@mickym Danke

[JosefThal]

benötige noch mal euer hilfe
es geht soweit ,die batterie über 91 % voll schaltet er eine wenn er unter 71 % ist schaltet er aus.
wenn ich den taster Starten ( Manuel ) geht es aber wenn die Batterie runter geht ( z.b. 50 % auf 49 % ) schaltet der Timer aus obwohl die zeit nicht abgelaufen ist

hab schon versucht eine undglied einzusetzt geht nicht

[
   {
       "id": "e4aa7e9b9fb405d9",
       "type": "tab",
       "label": "Tasmota Test1",
       "disabled": false,
       "info": "",
       "env": []
   },
   {
       "id": "74f2d76bc3ce958f",
       "type": "junction",
       "z": "e4aa7e9b9fb405d9",
       "x": 1060,
       "y": 480,
       "wires": [
           []
       ]
   },
   {
       "id": "e5c4d789e94d350e",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 81",
       "active": false,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 1040,
       "y": 160,
       "wires": []
   },
   {
       "id": "7cf3622b17046eee",
       "type": "change",
       "z": "e4aa7e9b9fb405d9",
       "name": "Spannung",
       "rules": [
           {
               "t": "move",
               "p": "payload.ENERGY.Voltage",
               "pt": "msg",
               "to": "payload",
               "tot": "msg"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 580,
       "y": 160,
       "wires": [
           [
               "e5c4d789e94d350e",
               "a10b8a367682404e"
           ]
       ]
   },
   {
       "id": "a10b8a367682404e",
       "type": "ui_gauge",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "group": "04d5298db5344c1e",
       "order": 1,
       "width": 0,
       "height": 0,
       "gtype": "gage",
       "title": "volt Test 1",
       "label": "units",
       "format": "{{value}}",
       "min": 0,
       "max": "240",
       "colors": [
           "#ff0000",
           "#ffff00",
           "#008000"
       ],
       "seg1": "200",
       "seg2": "220",
       "x": 760,
       "y": 160,
       "wires": []
   },
   {
       "id": "77456c5a3405fff3",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 82",
       "active": false,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 440,
       "y": 100,
       "wires": []
   },
   {
       "id": "89e9cf65394790da",
       "type": "change",
       "z": "e4aa7e9b9fb405d9",
       "name": "Strom Filter",
       "rules": [
           {
               "t": "move",
               "p": "payload.ENERGY.Current[1]",
               "pt": "msg",
               "to": "payload",
               "tot": "msg"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 570,
       "y": 200,
       "wires": [
           [
               "e60c46e0c106e4dc"
           ]
       ]
   },
   {
       "id": "318a5c613a88c769",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 83",
       "active": false,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 1040,
       "y": 200,
       "wires": []
   },
   {
       "id": "401d1fdd51ecce14",
       "type": "victron-input-battery",
       "z": "e4aa7e9b9fb405d9",
       "service": "com.victronenergy.battery.socketcan_can1",
       "path": "/Soc",
       "serviceObj": {
           "service": "com.victronenergy.battery.socketcan_can1",
           "name": "Pylontech battery"
       },
       "pathObj": {
           "path": "/Soc",
           "type": "float",
           "name": "State of charge (%)"
       },
       "initial": "",
       "name": "",
       "onlyChanges": false,
       "x": 190,
       "y": 340,
       "wires": [
           [
               "6ddde74da4bb9545"
           ]
       ]
   },
   {
       "id": "5369f8cb591ac34d",
       "type": "switch",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "property": "payload",
       "propertyType": "msg",
       "rules": [
           {
               "t": "gt",
               "v": "91",
               "vt": "num"
           },
           {
               "t": "lt",
               "v": "70",
               "vt": "num"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 2,
       "x": 210,
       "y": 500,
       "wires": [
           [
               "e5fea5b934a2efc7",
               "b9ed6599cf70de74"
           ],
           [
               "5012c46291e78a77",
               "cbe9c595bb01b81e"
           ]
       ]
   },
   {
       "id": "f237aa09ab50cbd7",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 84",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "payload",
       "targetType": "msg",
       "statusVal": "",
       "statusType": "auto",
       "x": 720,
       "y": 1020,
       "wires": []
   },
   {
       "id": "5d01b124055bea37",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "State Of Charge",
       "active": false,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "payload",
       "targetType": "msg",
       "statusVal": "",
       "statusType": "auto",
       "x": 1100,
       "y": 360,
       "wires": []
   },
   {
       "id": "6ddde74da4bb9545",
       "type": "change",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "rules": [
           {
               "t": "set",
               "p": "StateOfCharge",
               "pt": "global",
               "to": "payload",
               "tot": "msg"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 560,
       "y": 340,
       "wires": [
           [
               "5d01b124055bea37",
               "52e26a73c3b27f6e",
               "50eb11e95ce1c4f3"
           ]
       ]
   },
   {
       "id": "bd97fddd9dcd4646",
       "type": "ui_slider",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "label": "0 bis 100  test 1eingang",
       "tooltip": "",
       "group": "04d5298db5344c1e",
       "order": 3,
       "width": 0,
       "height": 0,
       "passthru": true,
       "outs": "all",
       "topic": "topic",
       "topicType": "msg",
       "min": 0,
       "max": "100",
       "step": 1,
       "x": 120,
       "y": 760,
       "wires": [
           [
               "1b2e513f58f2960b",
               "5369f8cb591ac34d"
           ]
       ]
   },
   {
       "id": "1b2e513f58f2960b",
       "type": "ui_gauge",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "group": "04d5298db5344c1e",
       "order": 4,
       "width": 0,
       "height": 0,
       "gtype": "gage",
       "title": "0 bis 100   test 1 Ausgang",
       "label": "Batterie",
       "format": "{{value}}",
       "min": 0,
       "max": "100",
       "colors": [
           "#ff0000",
           "#e6e600",
           "#00ff00"
       ],
       "seg1": "",
       "seg2": "",
       "x": 490,
       "y": 760,
       "wires": []
   },
   {
       "id": "0d5525e74b9b0109",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 86",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 680,
       "y": 580,
       "wires": []
   },
   {
       "id": "73f440c9fc6e840c",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 87",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 1060,
       "y": 280,
       "wires": []
   },
   {
       "id": "6ebf1c2b99b260a0",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 88",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 920,
       "y": 880,
       "wires": []
   },
   {
       "id": "99db0d2dae9eefe5",
       "type": "change",
       "z": "e4aa7e9b9fb405d9",
       "name": "Strom power",
       "rules": [
           {
               "t": "move",
               "p": "payload.Switch1",
               "pt": "msg",
               "to": "payload",
               "tot": "msg"
           },
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "on",
               "tot": "str"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 570,
       "y": 280,
       "wires": [
           [
               "ec8f88403a3d804a"
           ]
       ]
   },
   {
       "id": "d6f7d9277bab1b46",
       "type": "ui_chart",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "group": "a9d0f0d6dc0f0a7e",
       "order": 1,
       "width": 0,
       "height": 0,
       "label": "1Strom Test1",
       "chartType": "bar",
       "legend": "true",
       "xformat": "HH:mm:ss",
       "interpolate": "linear",
       "nodata": "",
       "dot": false,
       "ymin": "",
       "ymax": "",
       "removeOlder": 1,
       "removeOlderPoints": "",
       "removeOlderUnit": "3600",
       "cutout": 0,
       "useOneColor": false,
       "useUTC": false,
       "colors": [
           "#1f77b4",
           "#aec7e8",
           "#ff7f0e",
           "#2ca02c",
           "#98df8a",
           "#d62728",
           "#ff9896",
           "#9467bd",
           "#c5b0d5"
       ],
       "outputs": 1,
       "useDifferentColor": false,
       "x": 770,
       "y": 240,
       "wires": [
           [
               "eba281a8c7d862c3"
           ]
       ]
   },
   {
       "id": "eba281a8c7d862c3",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 89",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 1060,
       "y": 240,
       "wires": []
   },
   {
       "id": "f5252ff2d2f5e5c1",
       "type": "change",
       "z": "e4aa7e9b9fb405d9",
       "name": "Strom Filter",
       "rules": [
           {
               "t": "move",
               "p": "payload.ENERGY.Current[0]",
               "pt": "msg",
               "to": "payload",
               "tot": "msg"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 570,
       "y": 240,
       "wires": [
           [
               "d6f7d9277bab1b46"
           ]
       ]
   },
   {
       "id": "e60c46e0c106e4dc",
       "type": "ui_chart",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "group": "04d5298db5344c1e",
       "order": 5,
       "width": 0,
       "height": 0,
       "label": "Strom Test1",
       "chartType": "bar",
       "legend": "false",
       "xformat": "HH:mm:ss",
       "interpolate": "linear",
       "nodata": "",
       "dot": false,
       "ymin": "",
       "ymax": "",
       "removeOlder": 1,
       "removeOlderPoints": "",
       "removeOlderUnit": "3600",
       "cutout": 0,
       "useOneColor": false,
       "useUTC": false,
       "colors": [
           "#1f77b4",
           "#aec7e8",
           "#ff7f0e",
           "#2ca02c",
           "#98df8a",
           "#d62728",
           "#ff9896",
           "#9467bd",
           "#c5b0d5"
       ],
       "outputs": 1,
       "useDifferentColor": false,
       "x": 770,
       "y": 200,
       "wires": [
           [
               "318a5c613a88c769"
           ]
       ]
   },
   {
       "id": "e5fea5b934a2efc7",
       "type": "change",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "ON",
               "tot": "str"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 630,
       "y": 480,
       "wires": [
           [
               "a3ff7d845272b908",
               "d00e1f649acb16f3"
           ]
       ]
   },
   {
       "id": "7dd91967b9ae0e11",
       "type": "Tasmota Sensor",
       "z": "e4aa7e9b9fb405d9",
       "broker": "7a7b311bf649aa87",
       "device": "Tasmota_test1",
       "name": "",
       "outputs": 1,
       "uidisabler": false,
       "fullTopic": "",
       "cmndPrefix": "",
       "statPrefix": "",
       "telePrefix": "",
       "qos": 1,
       "retain": false,
       "rules": [],
       "outputTopic": "",
       "x": 240,
       "y": 140,
       "wires": [
           [
               "99db0d2dae9eefe5",
               "f5252ff2d2f5e5c1",
               "89e9cf65394790da",
               "7cf3622b17046eee",
               "77456c5a3405fff3"
           ]
       ]
   },
   {
       "id": "ec8f88403a3d804a",
       "type": "ui_chart",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "group": "04d5298db5344c1e",
       "order": 6,
       "width": 0,
       "height": 0,
       "label": "Pauer Test1",
       "chartType": "bar",
       "legend": "true",
       "xformat": "HH:mm:ss",
       "interpolate": "linear",
       "nodata": "",
       "dot": false,
       "ymin": "",
       "ymax": "",
       "removeOlder": 1,
       "removeOlderPoints": "",
       "removeOlderUnit": "3600",
       "cutout": 0,
       "useOneColor": false,
       "useUTC": false,
       "colors": [
           "#1f77b4",
           "#aec7e8",
           "#ff7f0e",
           "#2ca02c",
           "#98df8a",
           "#d62728",
           "#ff9896",
           "#9467bd",
           "#c5b0d5"
       ],
       "outputs": 1,
       "useDifferentColor": false,
       "x": 770,
       "y": 280,
       "wires": [
           [
               "73f440c9fc6e840c"
           ]
       ]
   },
   {
       "id": "d00e1f649acb16f3",
       "type": "mqtt out",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "topic": "cmnd/Tasmota_test1/POWER1",
       "qos": "",
       "retain": "",
       "respTopic": "",
       "contentType": "",
       "userProps": "",
       "correl": "",
       "expiry": "",
       "broker": "b84a725bf6dd8e6b",
       "x": 1530,
       "y": 500,
       "wires": []
   },
   {
       "id": "d9062f21b1c4fdaf",
       "type": "switch",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "property": "payload.Switch1",
       "propertyType": "msg",
       "rules": [
           {
               "t": "eq",
               "v": "ON",
               "vt": "str"
           }
       ],
       "checkall": "true",
       "repair": false,
       "outputs": 1,
       "x": 470,
       "y": 1020,
       "wires": [
           [
               "b22e13f626cd98a3",
               "f237aa09ab50cbd7"
           ]
       ]
   },
   {
       "id": "56a67d7f80182ecc",
       "type": "mqtt in",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "topic": "tele/Tasmota_test1/SENSOR",
       "qos": "0",
       "datatype": "json",
       "broker": "b84a725bf6dd8e6b",
       "nl": false,
       "rap": true,
       "rh": 0,
       "inputs": 0,
       "x": 190,
       "y": 980,
       "wires": [
           [
               "d9062f21b1c4fdaf",
               "a79580173aa2a19f"
           ]
       ]
   },
   {
       "id": "b22e13f626cd98a3",
       "type": "trigger",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "op1": "ON",
       "op2": "OFF",
       "op1type": "str",
       "op2type": "str",
       "duration": "12",
       "extend": false,
       "overrideDelay": true,
       "units": "s",
       "reset": "",
       "bytopic": "all",
       "topic": "topic",
       "outputs": 1,
       "x": 630,
       "y": 880,
       "wires": [
           [
               "6ebf1c2b99b260a0",
               "d00e1f649acb16f3"
           ]
       ]
   },
   {
       "id": "a3ff7d845272b908",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 98",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 620,
       "y": 420,
       "wires": []
   },
   {
       "id": "a79580173aa2a19f",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 100",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "payload",
       "targetType": "msg",
       "statusVal": "",
       "statusType": "auto",
       "x": 430,
       "y": 900,
       "wires": []
   },
   {
       "id": "52e26a73c3b27f6e",
       "type": "ui_text",
       "z": "e4aa7e9b9fb405d9",
       "group": "71e172fc8641b4f7",
       "order": 6,
       "width": 6,
       "height": 1,
       "name": "",
       "label": "Batterie test 1",
       "format": "{{msg.payload}}",
       "layout": "row-spread",
       "x": 830,
       "y": 380,
       "wires": []
   },
   {
       "id": "50eb11e95ce1c4f3",
       "type": "ui_gauge",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "group": "04d5298db5344c1e",
       "order": 2,
       "width": 0,
       "height": 0,
       "gtype": "gage",
       "title": "Batterie Test 1",
       "label": "units",
       "format": "{{value}}",
       "min": 0,
       "max": "100",
       "colors": [
           "#ff0000",
           "#ffff00",
           "#008000"
       ],
       "seg1": "30",
       "seg2": "75",
       "x": 840,
       "y": 420,
       "wires": []
   },
   {
       "id": "5012c46291e78a77",
       "type": "change",
       "z": "e4aa7e9b9fb405d9",
       "name": "",
       "rules": [
           {
               "t": "set",
               "p": "payload",
               "pt": "msg",
               "to": "OFF",
               "tot": "str"
           }
       ],
       "action": "",
       "property": "",
       "from": "",
       "to": "",
       "reg": false,
       "x": 630,
       "y": 520,
       "wires": [
           [
               "0d5525e74b9b0109",
               "d00e1f649acb16f3"
           ]
       ]
   },
   {
       "id": "b9ed6599cf70de74",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 101",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 390,
       "y": 440,
       "wires": []
   },
   {
       "id": "cbe9c595bb01b81e",
       "type": "debug",
       "z": "e4aa7e9b9fb405d9",
       "name": "debug 102",
       "active": true,
       "tosidebar": true,
       "console": false,
       "tostatus": false,
       "complete": "false",
       "statusVal": "",
       "statusType": "auto",
       "x": 370,
       "y": 600,
       "wires": []
   },
   {
       "id": "934a40174dc661ef",
       "type": "function",
       "z": "e4aa7e9b9fb405d9",
       "name": "function 1",
       "func": "\nreturn msg;",
       "outputs": 1,
       "noerr": 0,
       "initialize": "",
       "finalize": "",
       "libs": [],
       "x": 1340,
       "y": 240,
       "wires": [
           []
       ]
   },
   {
       "id": "04d5298db5344c1e",
       "type": "ui_group",
       "name": "Group 4",
       "tab": "12a65f5c2118623e",
       "order": 3,
       "disp": true,
       "width": 6
   },
   {
       "id": "a9d0f0d6dc0f0a7e",
       "type": "ui_group",
       "name": "Default",
       "tab": "12a65f5c2118623e",
       "order": 4,
       "disp": true,
       "width": 6,
       "collapse": false
   },
   {
       "id": "7a7b311bf649aa87",
       "type": "tasmota-mqtt-broker",
       "name": "",
       "broker": "localhost",
       "port": "1883",
       "clientid": "",
       "usetls": false,
       "keepalive": "60",
       "cleansession": true
   },
   {
       "id": "b84a725bf6dd8e6b",
       "type": "mqtt-broker",
       "name": "CerboGX",
       "broker": "192.168.178.35",
       "port": "1883",
       "clientid": "",
       "autoConnect": true,
       "usetls": false,
       "protocolVersion": "4",
       "keepalive": "60",
       "cleansession": true,
       "birthTopic": "",
       "birthQos": "0",
       "birthPayload": "",
       "birthMsg": {},
       "closeTopic": "",
       "closeQos": "0",
       "closePayload": "",
       "closeMsg": {},
       "willTopic": "",
       "willQos": "0",
       "willPayload": "",
       "willMsg": {},
       "userProps": "",
       "sessionExpiry": ""
   },
   {
       "id": "71e172fc8641b4f7",
       "type": "ui_group",
       "name": "Stapler ",
       "tab": "12a65f5c2118623e",
       "order": 1,
       "disp": true,
       "width": "6",
       "collapse": false
   },
   {
       "id": "12a65f5c2118623e",
       "type": "ui_tab",
       "name": "Home",
       "icon": "dashboard",
       "order": 2,
       "disabled": false,
       "hidden": false
   }
]

[mickym]

@josefthal Verstehe zwar nicht wie das gehen Soll, ausser der Tasmota Sensor gibt längere Zeit kein ON Signal.

Du hast doch nur EINE externe Quelle in Deinem Flow - der selbstständig schalten kann? (ROT markiert).

Bist Du Dir denn sicher, dass das Ganze was mit dem NodeRedFlow zu tun hat?

[JosefThal]

@mickym wichtig s.url