Modbus adapter

Glasfaser

@warp735 sagte in Modbus adapter:

An was hängst dich jetzt auf?

Das wir von dir alle Informationen zu deiner Installation erwarten !

Also bitte zurück zum Thema !

Siehe meinen Hinweis zu deiner Übersetzungseinstellung !

warp735

@glasfaser
Das "even" wars wohl... Mit Radzio bekomme ich Daten. Bei ioBroker noch nicht. <ich teste mal durch

Glasfaser

@warp735 sagte in Modbus adapter:

@glasfaser
Das "even" wars wohl...

siehst Du ... mit den Info´s von dir kommt man weiter .
und deine Screenshot zu den Einstellungen haben dabei geholfen !

Eingentlich habe ich mich ausgeklinkt ;)

Homoran

@warp735 sagte in Modbus adapter:

Das "even" wars wohl...

darum wollen wir immer alles sehen!

eine Nacherzählung

@warp735 sagte in Modbus adapter:

Nochmal: der RTU zu ETH läuft schon ewig einwandfrei.

kann immer Fehler enthalten

@warp735 sagte in Modbus adapter:

Bei ioBroker noch nicht

Deswegen warte ich ja immer noch auf das debug-log

warp735

@glasfaser
Super, vielen dank euch beiden. Die 20480 bringt bei mir nur 0, keine Ahnung warum. Die 20482 bringt die Spannung.Bombe. Vielen Dank

Homoran

@warp735 sagte in Modbus adapter:

Die 20480 bringt bei mir nur 0

bei welchen Einstellungen?

Homoran

@warp735 sagte in Modbus adapter:

Hab gerade noch n anderes "Problem" Wäre super, wenn mir einer auf die Sprünge helfen könnte.
Hab nen Eastron Zähler gegen nen Wago Zähler getauscht. Aber die Adressen versteh ich nicht und bekomm auch leider keine Daten rein :-(

was bedeutet denn das Sternchen bei 5000?
Die folgenden Register sind die Spannung L1-L3
kann es sein, dass 5000 nur bei einphasigen Zählern belegt ist (wie auch 500A). ich wüsste nicht was das noch für eine 4. Spannung sein sollte.

Glasfaser

@homoran

Hier die Lösung :)

Der Screenshot von Ihm mit dem Modbus Register ist vom Hersteller WAGO

im Orginal wie er hat von KDK

https://www.kdk-dornscheidt.de/wp-content/uploads/2017/11/Bedienungsanleitung_KDK_PRO380_4205100Pro_420506Pro_S_Mbus_Modbus_V3_00.pdf

@warp735 sagte in Modbus adapter:
Danke... tatsächlich überlesen. Was hast vorne eingestellt? Ich hab den KDK (Wago kauft nur zu)

warp735

@glasfaser
Das stimmt so nicht... Hab die Anleitung heute von KDK gezogen (da hast die falsche) Ich hab den baugleichen zu Wago 4P push

Aber deine Anleitung ergibt mehr Sinn :sweat_smile:

Homoran

@warp735 sagte in Modbus adapter:

Aber deine Anleitung ergibt mehr Sinn

wieso?

@homoran sagte in Modbus adapter:

was bedeutet denn das Sternchen bei 5000?

da wird das selbe stehen

warp735

@homoran
das Sternchen wird nirgends aufgelöst

CaneTLOTW

Hi, ich scheine eine ähnlich aber nicht gleich gelagertes Problem zu haben.
Radzio hat etwas weitergeholfen, so kann ich immerhin sehen, das durchaus Daten gesendet werden ;)
Weiter komme ich aber leider nicht.

Bei mir ist die modbus Datenquelle eine ETA PU7 Pelletheizung.

Mit Radzio kann ich in der Adresse 1000+ oder auch 20482 dezimale Werte lesen, die skaliert auch zu denen in der Heizung angezeigten passen.

Im iobroker bekomme ich jedoch immer diese Fehlermeldung für die modbus Instanz.

Wenn ich Adresse 41000 nutze, verschwindet der Fehler, jedoch gibt die Heizung hier nichts brauchbares aus...

Im iobroker kommt nichts an, obwohl immerhin das Objekt angelegt wird:

Hier meine Adaptereinstellungen:

wendy2702

@canetlotw Mach mal den Haken bei "Aliases nutzen" raus, kontrolliere dann nochmal die Register und stelle das Loggen auf Debug.

Poste dann das Log als TEXT in Code Tag </>

Schtallone

Guten Abend zusammen,

ich habe mal 1-2 Fragen zum Modbus Adapter, welche hoffentlich in diesem Thread richtig aufgehoben sind.

Folgende Log habe ich einmal repräsentativ hier angefügt.





2023-09-21 17:50:13.223  - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds
2023-09-21 17:50:55.007  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 17:51:55.009  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 17:52:28.070  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 17:53:28.072  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 17:55:00.063  - info: host.iobroker instance system.adapter.dwd.0 started with pid 15872
2023-09-21 17:55:01.546  - info: dwd.0 (15872) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
2023-09-21 17:55:02.457  - info: dwd.0 (15872) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-21 17:55:02.977  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-21 17:55:18.079  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 17:56:18.081  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 17:56:58.083  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 17:57:58.086  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 17:58:58.084  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 17:59:58.086  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 18:00:00.058  - info: host.iobroker instance system.adapter.dwd.0 started with pid 16115
2023-09-21 18:00:03.212  - info: dwd.0 (16115) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
2023-09-21 18:00:05.863  - info: dwd.0 (16115) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-21 18:00:06.387  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-21 18:00:18.082  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 18:01:18.084  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 18:02:13.108  - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds
2023-09-21 18:02:35.021  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 18:02:54.448  - info: shelly.0 (5156) [MQTT] Device with client id "shellyplus1pm-a8032ab96370" connected!
2023-09-21 18:03:35.022  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 18:03:58.089  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 18:04:58.091  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 18:05:00.064  - info: host.iobroker instance system.adapter.dwd.0 started with pid 16372
2023-09-21 18:05:01.542  - info: dwd.0 (16372) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
2023-09-21 18:05:02.768  - info: dwd.0 (16372) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-21 18:05:03.292  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-21 18:05:33.516  - error: modbus.0 (1212) Can not set value: Attempt to access memory outside buffer bounds
2023-09-21 18:07:34.528  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 18:08:34.532  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 18:09:05.028  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 18:10:00.059  - info: host.iobroker instance system.adapter.dwd.0 started with pid 16631
2023-09-21 18:10:01.955  - info: dwd.0 (16631) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
2023-09-21 18:10:03.758  - info: dwd.0 (16631) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-21 18:10:04.309  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-21 18:10:05.030  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 18:10:48.091  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 18:11:48.093  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 18:12:05.040  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47
2023-09-21 18:12:23.562  - info: admin.0 (246) ==> Connected system.user.admin from ::ffff:192.168.1.119
2023-09-21 18:13:05.042  - info: modbus.0 (1212) Connected to slave 192.168.1.47
2023-09-21 18:13:38.096  - info: modbus.0 (1212) Disconnected from slave 192.168.1.47


2023-09-21 18:57:56.667  - debug: modbus.0 (18045) [DevID_120] Poll start ---------------------
2023-09-21 18:57:56.667  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:57:56.767  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 DONE
2023-09-21 18:57:56.767  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:57:56.870  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 DONE
2023-09-21 18:57:57.921  - debug: modbus.0 (18045) [DevID_1] Poll start ---------------------
2023-09-21 18:57:57.922  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 - 2 registers
2023-09-21 18:57:58.023  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 DONE
2023-09-21 18:57:58.024  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:57:58.126  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 DONE
2023-09-21 18:57:58.177  - debug: modbus.0 (18045) [DevID_110] Poll start ---------------------
2023-09-21 18:57:58.177  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:57:58.277  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 52 DONE
2023-09-21 18:57:58.278  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:57:58.380  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 72 DONE
2023-09-21 18:57:58.431  - debug: modbus.0 (18045) [DevID_116] Poll start ---------------------
2023-09-21 18:57:58.431  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:57:58.533  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 52 DONE
2023-09-21 18:57:58.534  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 72 - 4 registers
2023-09-21 18:57:58.636  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 72 DONE
2023-09-21 18:57:58.637  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:57:58.738  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 342 DONE
2023-09-21 18:57:58.739  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 396 - 2 registers
2023-09-21 18:57:58.840  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 396 DONE
2023-09-21 18:57:58.841  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 1280 - 4 registers
2023-09-21 18:57:58.944  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 1280 DONE
2023-09-21 18:57:58.994  - debug: modbus.0 (18045) [DevID_120] Poll start ---------------------
2023-09-21 18:57:58.994  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:57:59.096  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 DONE
2023-09-21 18:57:59.097  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:57:59.198  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 DONE
2023-09-21 18:58:00.248  - debug: modbus.0 (18045) [DevID_1] Poll start ---------------------
2023-09-21 18:58:00.248  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 - 2 registers
2023-09-21 18:58:00.351  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 DONE
2023-09-21 18:58:00.351  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:58:00.454  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 DONE
2023-09-21 18:58:00.504  - debug: modbus.0 (18045) [DevID_110] Poll start ---------------------
2023-09-21 18:58:00.505  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:58:00.607  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 52 DONE
2023-09-21 18:58:00.607  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:58:00.708  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 72 DONE
2023-09-21 18:58:00.758  - debug: modbus.0 (18045) [DevID_116] Poll start ---------------------
2023-09-21 18:58:00.758  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:58:00.861  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 52 DONE
2023-09-21 18:58:00.862  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 72 - 4 registers
2023-09-21 18:58:00.964  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 72 DONE
2023-09-21 18:58:00.964  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:58:01.067  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 342 DONE
2023-09-21 18:58:01.067  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 396 - 2 registers
2023-09-21 18:58:01.168  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 396 DONE
2023-09-21 18:58:01.168  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 1280 - 4 registers
2023-09-21 18:58:01.271  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 1280 DONE
2023-09-21 18:58:01.322  - debug: modbus.0 (18045) [DevID_120] Poll start ---------------------
2023-09-21 18:58:01.323  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:58:01.424  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 DONE
2023-09-21 18:58:01.425  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:58:01.527  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 DONE
2023-09-21 18:58:02.578  - debug: modbus.0 (18045) [DevID_1] Poll start ---------------------
2023-09-21 18:58:02.579  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 - 2 registers
2023-09-21 18:58:13.694  - debug: modbus.0 (18045) Socket closed with error
2023-09-21 18:58:13.694  - debug: modbus.0 (18045) Clearing timeout of the current request.
2023-09-21 18:58:13.694  - debug: modbus.0 (18045) Cleaning up request fifo.
2023-09-21 18:58:14.695  - debug: modbus.0 (18045) Closing client on purpose.
2023-09-21 18:58:14.696  - info: modbus.0 (18045) Disconnected from slave 192.168.1.47
2023-09-21 18:59:14.699  - info: modbus.0 (18045) Connected to slave 192.168.1.47
2023-09-21 18:59:14.700  - debug: modbus.0 (18045) [DevID_1] Poll start ---------------------
2023-09-21 18:59:14.700  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 - 2 registers
2023-09-21 18:59:14.802  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 DONE
2023-09-21 18:59:14.803  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:59:14.889  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 DONE
2023-09-21 18:59:14.940  - debug: modbus.0 (18045) [DevID_110] Poll start ---------------------
2023-09-21 18:59:14.940  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:59:15.019  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 52 DONE
2023-09-21 18:59:15.020  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:59:15.099  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 72 DONE
2023-09-21 18:59:15.150  - debug: modbus.0 (18045) [DevID_116] Poll start ---------------------
2023-09-21 18:59:15.150  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:59:15.229  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 52 DONE
2023-09-21 18:59:15.230  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 72 - 4 registers
2023-09-21 18:59:15.316  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 72 DONE
2023-09-21 18:59:15.316  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:59:15.400  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 342 DONE
2023-09-21 18:59:15.400  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 396 - 2 registers
2023-09-21 18:59:15.483  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 396 DONE
2023-09-21 18:59:15.483  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 1280 - 4 registers
2023-09-21 18:59:15.566  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 1280 DONE
2023-09-21 18:59:15.616  - debug: modbus.0 (18045) [DevID_120] Poll start ---------------------
2023-09-21 18:59:15.616  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:59:15.700  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 DONE
2023-09-21 18:59:15.700  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:59:15.780  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 DONE
2023-09-21 18:59:16.832  - debug: modbus.0 (18045) [DevID_1] Poll start ---------------------
2023-09-21 18:59:16.833  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 - 2 registers
2023-09-21 18:59:16.920  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 DONE
2023-09-21 18:59:16.920  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:59:17.010  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 DONE
2023-09-21 18:59:17.061  - debug: modbus.0 (18045) [DevID_110] Poll start ---------------------
2023-09-21 18:59:17.062  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:59:17.143  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 52 DONE
2023-09-21 18:59:17.143  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:59:17.223  - debug: modbus.0 (18045) [DevID_110/inputRegs] Poll address 72 DONE
2023-09-21 18:59:17.274  - debug: modbus.0 (18045) [DevID_116] Poll start ---------------------
2023-09-21 18:59:17.274  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:59:17.353  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 52 DONE
2023-09-21 18:59:17.354  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 72 - 4 registers
2023-09-21 18:59:17.436  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 72 DONE
2023-09-21 18:59:17.437  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:59:17.520  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 342 DONE
2023-09-21 18:59:17.521  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 396 - 2 registers
2023-09-21 18:59:17.603  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 396 DONE
2023-09-21 18:59:17.604  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 1280 - 4 registers
2023-09-21 18:59:17.686  - debug: modbus.0 (18045) [DevID_116/inputRegs] Poll address 1280 DONE
2023-09-21 18:59:17.737  - debug: modbus.0 (18045) [DevID_120] Poll start ---------------------
2023-09-21 18:59:17.737  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 - 2 registers
2023-09-21 18:59:17.820  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 52 DONE
2023-09-21 18:59:17.821  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 - 2 registers
2023-09-21 18:59:17.900  - debug: modbus.0 (18045) [DevID_120/inputRegs] Poll address 72 DONE
2023-09-21 18:59:18.952  - debug: modbus.0 (18045) [DevID_1] Poll start ---------------------
2023-09-21 18:59:18.953  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 - 2 registers
2023-09-21 18:59:19.041  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 12 DONE
2023-09-21 18:59:19.041  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 - 2 registers
2023-09-21 18:59:19.131  - debug: modbus.0 (18045) [DevID_1/inputRegs] Poll address 342 DONE

Skript v.2023-06-20

*** BASE SYSTEM ***
cat: /sys/devices/virtual/dmi/id/sys_vendor: No such file or directory
Hardware Vendor : 
Kernel          : x86_64
Userland        : amd64
Docker          : v8.1.0
Virtualization  : Docker
Kernel          : x86_64
Userland        : amd64

Systemuptime and Load:
 19:07:15 up 5 days,  5:58,  0 users,  load average: 1.73, 1.57, 1.45
CPU threads: 2


*** Time and Time Zones ***
Thu Sep 21 17:07:15 UTC 2023
Thu Sep 21 19:07:15 CEST 2023
CEST +0200
Etc/UTC

*** User and Groups ***
root
/root
root

*** X-Server-Setup ***
X-Server:       false
Desktop: 
Terminal: 


*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        3.9G        669M        253M        3.3G        3.1G
Swap:            23G        1.1G         22G
Total:           31G        5.0G         23G

         7792 M total memory
         3872 M used memory
         3179 M active memory
         2564 M inactive memory
          669 M free memory
         1380 M buffer memory
         1870 M swap cache
        23447 M total swap
         1080 M used swap
        22366 M free swap

*** FILESYSTEM ***
Filesystem            Type     Size  Used Avail Use% Mounted on
overlay               overlay  2.6T  1.6T 1016G  62% /
tmpfs                 tmpfs     64M     0   64M   0% /dev
tmpfs                 tmpfs    3.9G     0  3.9G   0% /sys/fs/cgroup
shm                   tmpfs     64M     0   64M   0% /dev/shm
/dev/mapper/cachedev1 ext4     2.6T  1.6T 1016G  62% /opt/iobroker
tmpfs                 tmpfs    3.9G     0  3.9G   0% /proc/asound
tmpfs                 tmpfs    3.9G     0  3.9G   0% /proc/acpi
tmpfs                 tmpfs    3.9G     0  3.9G   0% /proc/scsi
tmpfs                 tmpfs    3.9G     0  3.9G   0% /sys/firmware

Messages concerning ext4 filesystem in dmesg:
dmesg: read kernel buffer failed: Operation not permitted

Show mounted filesystems (real ones only):
TARGET           SOURCE                                                                                                                                                      FSTYPE OPTIONS
/opt/iobroker    /dev/mapper/cachedev1[/Docker/iobroker]                                                                                                                     ext4   rw,relatime,stripe=256,data=ordered,data_err=abort,jqfmt=vfsv1,usrjquota=aquota.user
/etc/resolv.conf /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/fc3f3c4c81fc4d371ff10ae519deeb41066e2e757561c9f538dca358839bd4af/resolv.conf] ext4   rw,relatime,stripe=256,data=ordered,data_err=abort,jqfmt=vfsv1,usrjquota=aquota.user
/etc/hostname    /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/fc3f3c4c81fc4d371ff10ae519deeb41066e2e757561c9f538dca358839bd4af/hostname]    ext4   rw,relatime,stripe=256,data=ordered,data_err=abort,jqfmt=vfsv1,usrjquota=aquota.user
/etc/hosts       /dev/mapper/cachedev1[/Container/container-station-data/lib/docker/containers/fc3f3c4c81fc4d371ff10ae519deeb41066e2e757561c9f538dca358839bd4af/hosts]       ext4   rw,relatime,stripe=256,data=ordered,data_err=abort,jqfmt=vfsv1,usrjquota=aquota.user

Files in neuralgic directories:

/var:
33M     /var/
31M     /var/lib
18M     /var/lib/apt/lists
18M     /var/lib/apt
13M     /var/lib/dpkg



/opt/iobroker/backups:
1005M   /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
616M    /opt/iobroker/iobroker-data/
415M    /opt/iobroker/iobroker-data/files
132M    /opt/iobroker/iobroker-data/files/javascript.admin
129M    /opt/iobroker/iobroker-data/files/devices.admin/static
129M    /opt/iobroker/iobroker-data/files/devices.admin

The five largest files in iobroker-data are:
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.f95354b8.js.map
35M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map
33M     /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.10538062.js.map
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.edf7552a.js.map
21M     /opt/iobroker/iobroker-data/files/web.admin/static/js/main.e564fb87.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main amd64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://deb.debian.org/debian-security bullseye-security/main amd64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main amd64 Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree: 0

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

No configuration change needed.


Multihost discovery server: disabled
Discovery authentication:   enabled
Persistent activation:      disabled
Objects:                    jsonl on 127.0.0.1
States:                     jsonl on 127.0.0.1

Core adapters versions
js-controller:  5.0.12
admin:          6.10.1
javascript:     7.1.4

Adapters from github:   1

Adapter State
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alias-manager.0          : alias-manager         : iobroker                                 - disabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
  system.adapter.cloud.0                  : cloud                 : iobroker                                 - disabled
  system.adapter.device-watcher.0         : device-watcher        : iobroker                                 - disabled
  system.adapter.devices.0                : devices               : iobroker                                 - disabled
  system.adapter.dwd.0                    : dwd                   : iobroker                                 -  enabled
  system.adapter.energiefluss.0           : energiefluss          : iobroker                                 - disabled
  system.adapter.feiertage.0              : feiertage             : iobroker                                 -  enabled
  system.adapter.ical.0                   : ical                  : iobroker                                 - disabled
  system.adapter.jarvis.0                 : jarvis                : iobroker                                 - disabled
  system.adapter.javascript.0             : javascript            : iobroker                                 - disabled
  system.adapter.meross.0                 : meross                : iobroker                                 - disabled
+ system.adapter.modbus.0                 : modbus                : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.netatmo.0                : netatmo               : iobroker                                 -  enabled
+ system.adapter.node-red.0               : node-red              : iobroker                                 -  enabled, port: 1880, bind: 0.0.0.0
  system.adapter.pushover.0               : pushover              : iobroker                                 - disabled
  system.adapter.pvforecast.0             : pvforecast            : iobroker                                 - disabled
  system.adapter.schoolfree.0             : schoolfree            : iobroker                                 -  enabled
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.shuttercontrol.0         : shuttercontrol        : iobroker                                 -  enabled
  system.adapter.snmp.0                   : snmp                  : iobroker                                 - disabled
  system.adapter.sonos.0                  : sonos                 : iobroker                                 - disabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : iobroker                                 -  enabled
  system.adapter.telegram.0               : telegram              : iobroker                                 - disabled, port: 8443, bind: 0.0.0.0
+ system.adapter.vw-connect.0             : vw-connect            : iobroker                                 -  enabled
  system.adapter.web.0                    : web                   : iobroker                                 - disabled, port: 8082, bind: 0.0.0.0, run as: admin

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : iobroker                                 -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : iobroker                                 -  enabled, port: 1882, bind: 0.0.0.0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.10.1   , installed 6.10.1
Adapter    "alias-manager": 1.2.4    , installed 1.2.6
Adapter    "backitup"     : 2.8.1    , installed 2.8.1
Adapter    "cloud"        : 4.4.1    , installed 4.4.1
Adapter    "device-watcher": 2.9.3   , installed 2.9.3
Adapter    "devices"      : 1.1.5    , installed 1.1.5
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "feiertage"    : 1.1.0    , installed 1.1.4
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "influxdb"     : 3.2.0    , installed 3.2.0
Adapter    "jarvis"       : 3.1.2    , installed 3.1.8
Adapter    "javascript"   : 7.1.4    , installed 7.1.4
Controller "js-controller": 5.0.12   , installed 5.0.12
Adapter    "meross"       : 1.15.1   , installed 1.15.1
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "netatmo"      : 3.1.0    , installed 3.1.0
Adapter    "node-red"     : 4.0.3    , installed 4.0.3
Adapter    "pushover"     : 3.0.3    , installed 3.0.4
Adapter    "pvforecast"   : 2.7.1    , installed 2.7.1
Adapter    "schoolfree"   : 1.1.1    , installed 1.1.2
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "shuttercontrol": 1.6.2   , installed 1.6.2
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "snmp"         : 2.4.11   , installed 2.4.11
Adapter    "socketio"     : 6.5.5    , installed 6.5.5
Adapter    "sonos"        : 2.3.1    , installed 2.3.1
Adapter    "telegram"     : 1.16.0   , installed 1.16.0
Adapter    "terminal"     : 1.0.0    , installed 1.0.0
Adapter    "vw-connect"   : 0.0.67   , installed 0.1.2
Adapter    "web"          : 6.1.2    , installed 6.1.2
Adapter    "ws"           : 2.5.5    , installed 2.5.5

Objects and States
Please stand by - This may take a while
Objects:        10622
States:         8871

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian bullseye InRelease
Hit:2 http://deb.debian.org/debian-security bullseye-security InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 1

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name    
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1000       82559291   -                   
tcp        0      0 0.0.0.0:1882            0.0.0.0:*               LISTEN      1000       56866846   -                   
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1000       25973221   -                   
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1000       25973205   -                   
tcp        0      0 127.0.0.11:39891        0.0.0.0:*               LISTEN      0          25586275   -                   
tcp6       0      0 :::8081                 :::*                    LISTEN      1000       25995518   -                   
udp        0      0 127.0.0.11:41697        0.0.0.0:*                           0          25586274   -                   

*** Log File - Last 25 Lines ***

2023-09-15 00:37:02.337  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus1pm / shellyplus1pm-a8032ab94e10 / shellyplus1pm#a8032ab94e10#1) (false)
2023-09-15 00:37:03.121  - error: shelly.0 (506) [MQTT] Unable to get mqttprefix of client with id "shellyplus2pm-b8d61a876248"
2023-09-15 00:37:04.440  - info: shelly.0 (506) [MQTT] Device with client id "shellyplus2pm-5443b23e5f74" connected!
2023-09-15 00:37:05.005  - error: shelly.0 (506) [MQTT] Unable to get mqttprefix of client with id "shellyplus2pm-b8d61a8b94fc"
2023-09-15 00:37:05.005  - error: shelly.0 (506) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-7c87ce65d970"
2023-09-15 00:37:05.006  - error: shelly.0 (506) [MQTT] Unable to get mqttprefix of client with id "shellyplus2pm-b8d61a8bf730"
2023-09-15 00:37:05.006  - error: shelly.0 (506) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-a8032ab94e10"
2023-09-15 00:37:05.295  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus2pm / shellyplus2pm-b8d61a863524 / shellyplus2pm#b8d61a863524#1) (false)
2023-09-15 00:37:05.587  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus1pm / shellyplus1pm-3c610579bd34 / shellyplus1pm#3c610579bd34#1) (false)
2023-09-15 00:37:06.868  - error: shelly.0 (506) [MQTT] Unable to get mqttprefix of client with id "shellyplus2pm-b8d61a863524"
2023-09-15 00:37:07.457  - error: shelly.0 (506) [MQTT] Unable to get mqttprefix of client with id "shellyplus1pm-3c610579bd34"
2023-09-15 00:37:07.722  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus2pm / shellyplus2pm-4022d8da969c / shellyplus2pm#4022d8da969c#1) (false)
2023-09-15 00:37:07.785  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus1pm / shellyplus1pm-7c87ce65d794 / shellyplus1pm#7c87ce65d794#1) (false)
2023-09-15 00:37:11.460  - info: modbus.0 (411) Connected to slave 192.168.1.47
2023-09-15 00:37:12.224  - info: shelly.0 (506) [MQTT] Device with client id "shellyplus2pm-5443b23ecce4" connected!
2023-09-15 00:37:14.432  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus2pm / shellyplus2pm-5443b23e5f74 / shellyplus2pm#5443b23e5f74#1) (false)
2023-09-15 00:37:22.217  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus2pm / shellyplus2pm-5443b23ecce4 / shellyplus2pm#5443b23ecce4#1) (false)
2023-09-15 00:37:25.564  - info: shelly.0 (506) [MQTT] Device with client id "shellyplus2pm-5443b23fd3dc" connected!
2023-09-15 00:37:27.320  - info: modbus.0 (411) Disconnected from slave 192.168.1.47
2023-09-15 00:37:29.078  - info: shelly.0 (506) [MQTT] Device with client id "shellyplus1pm-a8032abc230c" connected!
2023-09-15 00:37:30.096  - info: shelly.0 (506) [MQTT] Device with client id "shellyplus2pm-5443b23e1a90" connected!
2023-09-15 00:37:35.564  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus2pm / shellyplus2pm-5443b23fd3dc / shellyplus2pm#5443b23fd3dc#1) (false)
2023-09-15 00:37:36.407  - info: shelly.0 (506) [MQTT] Device with client id "shellyplus2pm-4022d8dbe474" connected!
2023-09-15 00:37:38.493  - info: shelly.0 (506) [MQTT] Device with client id "shellyplus1-441793a820f4" connected!
2023-09-15 00:37:38.853  - info: shelly.0 (506) [MQTT] Client Close:  (shellyplus1pm / shellyplus1pm-a8032abc230c / shellyplus1pm#a8032abc230c#1) (false)

======================= SUMMARY =======================
                     v.2023-06-20


model name      : Intel(R) Celeron(R) J4005 CPU @ 2.00GHz
Kernel          : x86_64
Userland        : amd64
Docker          : v8.1.0

Installation:           Docker
Kernel:                 x86_64
Userland:               amd64
Timezone:               Etc/UTC
User-ID:                0
X-Server:               false


Pending OS-Updates:     1
Pending iob updates:    0

Nodejs-Installation:    /usr/bin/nodejs         v18.17.1
                        /usr/bin/node           v18.17.1
                        /usr/bin/npm            9.6.7
                        /usr/bin/npx            9.6.7

Recommended versions are nodejs 18.x.y and npm 9.x.y
Your nodejs installation is correct

MEMORY: 
               total        used        free      shared  buff/cache   available
Mem:            7.8G        3.9G        808M        252M        3.1G        3.1G
Swap:            23G        1.1G         22G
Total:           31G        5.0G         23G

Active iob-Instances:   11
Active repo(s): stable

ioBroker Core:          js-controller           5.0.12
                        admin                   6.10.1

ioBroker Status:        iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.web.0                    : web                   : iobroker                                 - disabled, port: 8082, bind: 0.0.0.0, run as: admin

Objects:                10622
States:                 8871

Size of iob-Database:

25M     /opt/iobroker/iobroker-data/objects.jsonl
3.0M    /opt/iobroker/iobroker-data/states.jsonl



=================== END OF SUMMARY ====================

Der Modbus Adapter in der Version 5.0.11 verbindet und trennt die VErbindung zu einem Protoss PE-11 Modbus-Ethernet Adapter mitz der statischen IP 192.168.1.47, an dem in SUmme 3 SDM72 Zähler hängen.

Weitere Register der Zähler lese ich direkt per NodeRed aus und schreibe Sie nach Aufbereitung in eine Influx2.0 DB.

Den Umweg über den ioB wähle ich bei den oben genannten Registern, da ich diese Verbräuche per SourceAnalytics Adapter verarbeitet und dann auch per NodeRed in die InfluxDB schreibe.

Meine Fragen lautet:
Ist dieses Connect / Disconnect VErhalten normal?

Ich bekomme auch periodisch Fehlermeldungen (siehe Log). Wie kann ich dies in den Griff bekommen bzw. optimieren?

Folgende Register lese ich aus:

Folgende Apdater-Einstellungen habe ich aktuell am laufen:

Wenn Ihr noch weitere Informationen benötigt, teile ich diese gerne mit.

Danke für Eure Hilfe und Gruß

Homoran

@schtallone sagte in Modbus adapter:

Ist dieses Connect / Disconnect VErhalten normal?

wenn du

@schtallone sagte in Modbus adapter:

Weitere Register der Zähler lese ich direkt per NodeRed aus

auf das selbe Interface zugreifst könnte ich mir das als Ursache vorstellen.

Schtallone

@homoran
Ich habe mal die Abfragen über NodeRed deaktiviert. Die Frquenz der Disconnects ist geringer geworden, aber nicht weg:

2023-09-21 19:29:58.381  - info: modbus.0 (21734) starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v18.17.1, js-controller: 5.0.12
2023-09-21 19:29:59.582  - info: modbus.0 (21734) Connected to slave 192.168.1.47
2023-09-21 19:30:00.058  - info: host.iobroker instance system.adapter.dwd.0 started with pid 21749
2023-09-21 19:30:02.490  - info: dwd.0 (21749) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
2023-09-21 19:30:05.734  - info: dwd.0 (21749) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-21 19:30:06.258  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-21 19:30:23.880  - info: modbus.0 (21734) Disconnected from slave 192.168.1.47
2023-09-21 19:31:23.882  - info: modbus.0 (21734) Connected to slave 192.168.1.47
2023-09-21 19:31:44.468  - info: modbus.0 (21734) Disconnected from slave 192.168.1.47
2023-09-21 19:32:09.510  - info: admin.0 (246) ==> Connected system.user.admin from ::ffff:192.168.1.119
2023-09-21 19:32:44.471  - info: modbus.0 (21734) Connected to slave 192.168.1.47
2023-09-21 19:33:04.531  - info: modbus.0 (21734) Disconnected from slave 192.168.1.47

Glasfaser

@schtallone sagte in Modbus adapter:

2023-09-21 18:02:54.448 - info: shelly.0 (5156) [MQTT] Device with client id "shellyplus1pm-a8032ab96370" connected!

Schalte mal testweise die Shelly Instanz aus , danach startest du den Container neu .

Was ist dann , wenn der Shelly Adapter aus ist , mit den Meldungen !?

PS :
Seit 2 Wochen habe ich den Shelly Adapter installiert ( ink 3 Geräte ) , danach habe ich ein merkwürdiges phänomen beim Modbus Adapter festgestellt wie bei dir , nur sind bei mir 5 Instanzen betroffen , die gleich Meldung wie bei dir und beim anlernen einer Shelly bekomme ich ein App Timeout sogar .
Den Hintergrund bin ich selber noch am suchen .

Schtallone

@glasfaser

werde ich gleich mal testen und berichten.

Diese Fehlermeldung kommt aus sporadisch....

2023-09-21 19:36:55.244  - info: modbus.0 (21734) Connected to slave 192.168.1.47
2023-09-21 19:37:02.585  - error: modbus.0 (21734) Can not set value: Attempt to access memory outside buffer bounds
2023-09-21 19:37:24.243  - info: modbus.0 (21734) Disconnected from slave 192.168.1.47

Glasfaser

@schtallone

Eventuell muß du den "Datenabfrageinterval" höher setzen von 1000 auf z.B 5000 ,
probiere es zusätzlich noch aus !

Schtallone

@glasfaser
Habe den Shelly Adapter aus. Keine Veränderung.

Ebenfalls Abfrageintervall von 1000 auf 5000 erhöht. Immernoch Connects / dissconnects.

2023-09-21 19:48:23.048  - info: modbus.0 (233) Got terminate signal TERMINATE_YOURSELF
2023-09-21 19:48:23.050  - info: modbus.0 (233) terminating
2023-09-21 19:48:23.051  - info: modbus.0 (233) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-21 19:48:23.384  - info: admin.0 (179) <== Disconnect system.user.admin from ::ffff:192.168.1.119 modbus
2023-09-21 19:48:23.552  - info: modbus.0 (233) terminating
2023-09-21 19:48:23.606  - info: host.iobroker instance system.adapter.modbus.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-21 19:48:26.186  - info: host.iobroker instance system.adapter.modbus.0 started with pid 837
2023-09-21 19:48:27.576  - info: modbus.0 (837) starting. Version 5.0.11 in /opt/iobroker/node_modules/iobroker.modbus, node: v18.17.1, js-controller: 5.0.12
2023-09-21 19:48:27.931  - info: modbus.0 (837) Connected to slave 192.168.1.47
2023-09-21 19:49:24.868  - info: modbus.0 (837) Disconnected from slave 192.168.1.47
2023-09-21 19:50:00.046  - info: host.iobroker instance system.adapter.dwd.0 started with pid 924
2023-09-21 19:50:01.683  - info: dwd.0 (924) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
2023-09-21 19:50:03.711  - info: dwd.0 (924) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-21 19:50:04.272  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-21 19:50:24.870  - info: modbus.0 (837) Connected to slave 192.168.1.47
2023-09-21 19:52:24.880  - info: modbus.0 (837) Disconnected from slave 192.168.1.47
2023-09-21 19:53:24.881  - info: modbus.0 (837) Connected to slave 192.168.1.47
2023-09-21 19:54:13.873  - info: modbus.0 (837) Disconnected from slave 192.168.1.47
2023-09-21 19:55:00.048  - info: host.iobroker instance system.adapter.dwd.0 started with pid 1170
2023-09-21 19:55:01.615  - info: dwd.0 (1170) starting. Version 2.8.5 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.17.1, js-controller: 5.0.12
2023-09-21 19:55:02.794  - info: dwd.0 (1170) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-09-21 19:55:03.319  - info: host.iobroker instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-09-21 19:55:13.876  - info: modbus.0 (837) Connected to slave 192.168.1.47
2023-09-21 19:55:44.888  - info: modbus.0 (837) Disconnected from slave 192.168.1.47
2023-09-21 19:56:44.892  - info: modbus.0 (837) Connected to slave 192.168.1.47

Community Forum

NEWS

Modbus adapter

Support us

780

32.4k

81.4k

1.3m