Wechselnde USB-Stick mounts nach Neustart
-
@mp_trixi bei einem 4GB System über 50 Adapter ist nicht grad "gesund"
-
Schaut okay aus.
Zu dem Repo: Versuch mal die sog. 'live'-Quelle einzubinden.
Hab da aber gerade die Befehle dazu nicht zur Hand. -
hab nicht alles am Laufen, die Auslastung scheint mir noch ok zu sein:
@Thomas-Braun
ok, ich versuche mal dazu was zu finden -
@mp_trixi sagte in Wechselnde USB-Stick mounts nach Neustart:
die Auslastung scheint mir noch ok zu sein
da bitte nicht schauen, sondern in der Konsole
-
@djmarc75 sagte in Wechselnde USB-Stick mounts nach Neustart:
sondern in der Konsole
free
iniob diag
schaut doch gut aus. -
@djmarc75
so?pi@smarthome:/opt/iobroker/node_modules/@serialport/bindings $ free total used free shared buff/cache available Mem: 3885396 2438848 501240 844 945308 1467740 Swap: 102396 0 102396 -
-
@thomas-braun sagte in Wechselnde USB-Stick mounts nach Neustart:
free -mt --mega
den mag mein System nicht:
pi@smarthome:/opt/iobroker/node_modules/@serialport/bindings $ free -mt --mega free: Multiple unit options doesn't make sense.aber wenn es im diag drin ist und passt bin ich ja beruhigt.
-
@thomas-braun sagte in Wechselnde USB-Stick mounts nach Neustart:
Zu dem Repo: Versuch mal die sog. 'live'-Quelle einzubinden
dazu habe ich leider nichts gefunden. In der GUI sieht es so aus:
ist es das?
https://iobroker.readthedocs.io/de/latest/ecosystem/domains.html#iobroker-live -
hab was gefunden:
https://forum.iobroker.net/topic/57541/gelöst-nach-installation-weden-keine-adapter-angezeigt/11und so gemacht. Wenn ich damit dann einen iob diag mache, hängt sich der iobroker an der Stelle auf:
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 14:24:59 up 2:52, 2 users, load average: 1.02, 0.98, 0.88 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=54.5'C volt=0.9160V *** Time and Time Zones *** Local time: Fri 2023-06-30 14:24:59 CEST Universal time: Fri 2023-06-30 12:24:59 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.5G 954M 0.0K 325M 1.2G Swap: 99M 89M 10M Total: 3.9G 2.6G 964M 3794 M total memory 2514 M used memory 1545 M active memory 984 M inactive memory 954 M free memory 2 M buffer memory 322 M swap cache 99 M total swap 89 M used swap 10 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 28G 12G 15G 45% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 844K 759M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 31M 222M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jun 30 11:32:49 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:62:A2:E5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=cf73e54d-02 rootfstype=ext4 fsck.repair=yes rootwait [Fri Jun 30 11:32:50 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jun 30 11:32:50 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Jun 30 11:32:52 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 4.0G /var/ 3.2G /var/log 2.8G /var/log/journal/6c5b87a59f584c03b6491451f2e5b6da 2.8G /var/log/journal 464M /var/lib Archived and active journals take up 2.7G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.6G /opt/iobroker/iobroker-data/ 3.0G /opt/iobroker/iobroker-data/history 458M /opt/iobroker/iobroker-data/files 95M /opt/iobroker/iobroker-data/backup-objects 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 42M /opt/iobroker/iobroker-data/objects.jsonl 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 13M /opt/iobroker/iobroker-data/states.jsonl 8.6M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js *** NodeJS-Installation *** /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.1-deb-1nodesource1 Candidate: 18.16.1-deb-1nodesource1 Version table: *** 18.16.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.0.3 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : smarthome - enabled + system.adapter.backitup.0 : backitup : smarthome - enabled system.adapter.bmw.0 : bmw : smarthome - disabled system.adapter.devices.0 : devices : smarthome - enabled system.adapter.discovery.0 : discovery : smarthome - disabled + system.adapter.energiefluss.0 : energiefluss : smarthome - enabled system.adapter.feiertage.0 : feiertage : smarthome - enabled system.adapter.habpanel.0 : habpanel : smarthome - disabled + system.adapter.harmony.0 : harmony : smarthome - enabled system.adapter.heatingcontrol.0 : heatingcontrol : smarthome - disabled + system.adapter.history.0 : history : smarthome - enabled system.adapter.homeconnect.0 : homeconnect : smarthome - disabled + system.adapter.hue-extended.0 : hue-extended : smarthome - enabled system.adapter.ical.0 : ical : smarthome - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: smarthome - disabled system.adapter.icons-icons8.0 : icons-icons8 : smarthome - enabled system.adapter.icons-material-png.0 : icons-material-png : smarthome - disabled system.adapter.icons-material-svg.0 : icons-material-svg : smarthome - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : smarthome - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: smarthome - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : smarthome - disabled + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.javascript.0 : javascript : smarthome - enabled system.adapter.javascript.1 : javascript : smarthome - disabled + system.adapter.logparser.0 : logparser : smarthome - enabled + system.adapter.meross.0 : meross : smarthome - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : smarthome - enabled, port: 54321 + system.adapter.modbus.0 : modbus : smarthome - enabled + system.adapter.myenergi.0 : myenergi : smarthome - enabled + system.adapter.net-tools.0 : net-tools : smarthome - enabled system.adapter.openweathermap.0 : openweathermap : smarthome - enabled system.adapter.powerfox2.0 : powerfox2 : smarthome - enabled + system.adapter.pvforecast.0 : pvforecast : smarthome - enabled + system.adapter.rpi2.0 : rpi2 : smarthome - enabled system.adapter.schoolfree.0 : schoolfree : smarthome - enabled + system.adapter.selverf.0 : selverf : smarthome - enabled + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sourceanalytix.0 : sourceanalytix : smarthome - enabled + system.adapter.synology.0 : synology : smarthome - enabled, port: 5501 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.trashschedule.0 : trashschedule : smarthome - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : smarthome - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : smarthome - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : smarthome - enabled system.adapter.vis-icontwo.0 : vis-icontwo : smarthome - enabled system.adapter.vis-inventwo.0 : vis-inventwo : smarthome - disabled system.adapter.vis-map.0 : vis-map : smarthome - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : smarthome - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : smarthome - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : smarthome - enabled system.adapter.vis-metro.0 : vis-metro : smarthome - enabled system.adapter.vis-plumb.0 : vis-plumb : smarthome - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : smarthome - enabled system.adapter.vis-weather.0 : vis-weather : smarthome - enabled system.adapter.vis.0 : vis : smarthome - enabled + system.adapter.vw-connect.0 : vw-connect : smarthome - enabled + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : smarthome - enabled + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : smarthome - enabled, port: 54321 + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.synology.0 : synology : smarthome - enabled, port: 5501 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json live-stable : http://iobroker.live/repo/sources-dist.json Active repo(s): live-stable Installed ioBroker-Instances Used repository: live-stable -
musste dem Raspi den Stecker ziehn (pingbar war er noch, aber auf die Konsole kam ich nicht mehr). Nach dem Neustart scheint es ok zu sein:
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.4 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 14:39:10 up 5 min, 2 users, load average: 2.96, 2.38, 1.09 CPU threads: 4 Raspberry only: throttled=0x0 Other values than 0x0 hint to temperature/voltage problems temp=59.4'C volt=0.9160V *** Time and Time Zones *** Local time: Fri 2023-06-30 14:39:11 CEST Universal time: Fri 2023-06-30 12:39:11 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** User and Groups *** pi /home/pi pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: tty Boot Target: multi-user.target *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 2.5G 1.1G 0.0K 265M 1.3G Swap: 99M 2.0M 97M Total: 3.9G 2.5G 1.2G 3794 M total memory 2458 M used memory 617 M active memory 1974 M inactive memory 1069 M free memory 10 M buffer memory 255 M swap cache 99 M total swap 2 M used swap 97 M free swap Raspberry only: oom events: 0 lifetime oom required: 0 Mbytes total time in oom handler: 0 ms max time spent in oom handler: 0 ms *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 28G 12G 15G 45% / devtmpfs devtmpfs 1.7G 0 1.7G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 759M 844K 759M 1% /run tmpfs tmpfs 5.0M 4.0K 5.0M 1% /run/lock /dev/mmcblk0p1 vfat 253M 31M 222M 13% /boot tmpfs tmpfs 380M 0 380M 0% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Fri Jun 30 14:33:37 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=E4:5F:01:62:A2:E5 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=cf73e54d-02 rootfstype=ext4 fsck.repair=yes rootwait [Fri Jun 30 14:33:38 2023] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem [Fri Jun 30 14:33:38 2023] EXT4-fs (mmcblk0p2): write access will be enabled during recovery [Fri Jun 30 14:33:39 2023] EXT4-fs (mmcblk0p2): recovery complete [Fri Jun 30 14:33:39 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none. [Fri Jun 30 14:33:39 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Fri Jun 30 14:33:41 2023] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/mmcblk0p2 ext4 rw,noatime `-/boot /dev/mmcblk0p1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,flush,errors=remount-ro Files in neuralgic directories: /var: 3.9G /var/ 3.1G /var/log 2.7G /var/log/journal/6c5b87a59f584c03b6491451f2e5b6da 2.7G /var/log/journal 468M /var/lib Archived and active journals take up 2.6G in the file system. /opt/iobroker/backups: 4.0K /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 3.6G /opt/iobroker/iobroker-data/ 3.0G /opt/iobroker/iobroker-data/history 458M /opt/iobroker/iobroker-data/files 95M /opt/iobroker/iobroker-data/backup-objects 78M /opt/iobroker/iobroker-data/files/icons-open-icon-library-png The five largest files in iobroker-data are: 55M /opt/iobroker/iobroker-data/objects.jsonl 35M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js.map 16M /opt/iobroker/iobroker-data/states.jsonl 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 8.6M /opt/iobroker/iobroker-data/files/devices.admin/static/js/main.24f2bb56.js *** NodeJS-Installation *** /usr/bin/nodejs v18.16.1 /usr/bin/node v18.16.1 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.1-deb-1nodesource1 Candidate: 18.16.1-deb-1nodesource1 Version table: *** 18.16.1-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u4 500 500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.12~dfsg-1~deb11u3 500 500 http://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 7.0.3 Adapters from github: 1 Adapter State + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.alexa2.0 : alexa2 : smarthome - enabled + system.adapter.backitup.0 : backitup : smarthome - enabled system.adapter.bmw.0 : bmw : smarthome - disabled system.adapter.devices.0 : devices : smarthome - enabled system.adapter.discovery.0 : discovery : smarthome - disabled + system.adapter.energiefluss.0 : energiefluss : smarthome - enabled system.adapter.feiertage.0 : feiertage : smarthome - enabled system.adapter.habpanel.0 : habpanel : smarthome - disabled + system.adapter.harmony.0 : harmony : smarthome - enabled system.adapter.heatingcontrol.0 : heatingcontrol : smarthome - disabled + system.adapter.history.0 : history : smarthome - enabled system.adapter.homeconnect.0 : homeconnect : smarthome - disabled + system.adapter.hue-extended.0 : hue-extended : smarthome - enabled system.adapter.ical.0 : ical : smarthome - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: smarthome - disabled system.adapter.icons-icons8.0 : icons-icons8 : smarthome - enabled system.adapter.icons-material-png.0 : icons-material-png : smarthome - disabled system.adapter.icons-material-svg.0 : icons-material-svg : smarthome - enabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : smarthome - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: smarthome - enabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : smarthome - disabled + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.javascript.0 : javascript : smarthome - enabled system.adapter.javascript.1 : javascript : smarthome - disabled + system.adapter.logparser.0 : logparser : smarthome - enabled + system.adapter.meross.0 : meross : smarthome - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : smarthome - enabled, port: 54321 + system.adapter.modbus.0 : modbus : smarthome - enabled + system.adapter.myenergi.0 : myenergi : smarthome - enabled + system.adapter.net-tools.0 : net-tools : smarthome - enabled system.adapter.openweathermap.0 : openweathermap : smarthome - enabled system.adapter.powerfox2.0 : powerfox2 : smarthome - enabled + system.adapter.pvforecast.0 : pvforecast : smarthome - enabled + system.adapter.rpi2.0 : rpi2 : smarthome - enabled system.adapter.schoolfree.0 : schoolfree : smarthome - enabled + system.adapter.selverf.0 : selverf : smarthome - enabled + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.sourceanalytix.0 : sourceanalytix : smarthome - enabled + system.adapter.synology.0 : synology : smarthome - enabled, port: 5501 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.trashschedule.0 : trashschedule : smarthome - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : smarthome - enabled system.adapter.vis-google-fonts.0 : vis-google-fonts : smarthome - enabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : smarthome - enabled system.adapter.vis-icontwo.0 : vis-icontwo : smarthome - enabled system.adapter.vis-inventwo.0 : vis-inventwo : smarthome - disabled system.adapter.vis-map.0 : vis-map : smarthome - enabled system.adapter.vis-material-advanced.0 : vis-material-advanced : smarthome - enabled system.adapter.vis-material-webfont.0 : vis-material-webfont : smarthome - enabled system.adapter.vis-materialdesign.0 : vis-materialdesign : smarthome - enabled system.adapter.vis-metro.0 : vis-metro : smarthome - enabled system.adapter.vis-plumb.0 : vis-plumb : smarthome - enabled system.adapter.vis-timeandweather.0 : vis-timeandweather : smarthome - enabled system.adapter.vis-weather.0 : vis-weather : smarthome - enabled system.adapter.vis.0 : vis : smarthome - enabled + system.adapter.vw-connect.0 : vw-connect : smarthome - enabled + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : smarthome - enabled + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : smarthome - enabled, port: 8081, bind: 0.0.0.0 (SSL), run as: admin + system.adapter.influxdb.0 : influxdb : smarthome - enabled, port: 8086 + system.adapter.mihome-vacuum.0 : mihome-vacuum : smarthome - enabled, port: 54321 + system.adapter.shelly.0 : shelly : smarthome - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.simple-api.0 : simple-api : smarthome - enabled, port: 8087, bind: 0.0.0.0, run as: admin + system.adapter.synology.0 : synology : smarthome - enabled, port: 5501 + system.adapter.telegram.0 : telegram : smarthome - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : smarthome - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.ws.0 : ws : smarthome - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : smarthome - enabled, port: /dev/serial/by-id/usb-Silicon_Labs_CP2102N_USB_to_UART_Bridge_Controller_626a1ae89b93eb11ac711b4f3d98b6d1-if00-port0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json live-stable : http://iobroker.live/repo/sources-dist.json Active repo(s): live-stable Installed ioBroker-Instances Used repository: live-stable Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.23 , installed 2.6.23 Adapter "bmw" : 2.5.7 , installed 2.5.7 Adapter "devices" : 1.1.5 , installed 1.1.5 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "habpanel" : 0.5.0 , installed 0.5.0 Adapter "harmony" : 1.2.2 , installed 1.2.2 Adapter "heatingcontrol": 2.10.6 , installed 2.10.6 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "homeconnect" : 1.1.1 , installed 1.1.1 Adapter "hue-extended" : 2.0.0 , installed 2.0.0 Adapter "ical" : 1.13.3 , installed 1.13.3 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-svg": 1.1.0 , installed 1.1.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 3.2.0 , installed 3.2.0 Adapter "javascript" : 7.0.3 , installed 7.0.3 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "logparser" : 2.2.0 , installed 2.2.0 Adapter "meross" : 1.15.1 , installed 1.15.1 Adapter "mihome-vacuum": 3.11.0 , installed 3.8.8 [Updatable] Adapter "modbus" : 5.0.11 , installed 5.0.5 [Updatable] Adapter "myenergi" : 0.0.3 , installed 0.0.3 Adapter "net-tools" : 0.2.0 , installed 0.2.0 Adapter "openweathermap": 0.3.9 , installed 0.3.9 Adapter "powerfox2" : 0.0.12 , installed 0.0.12 Adapter "pvforecast" : 2.7.1 , installed 2.7.1 Adapter "rpi2" : 1.3.2 , installed 1.3.2 Adapter "schoolfree" : 1.1.1 , installed 1.1.1 Adapter "selverf" : 0.6.2 , installed 0.6.2 Adapter "shelly" : 6.4.1 , installed 6.4.1 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "synology" : 2.1.13 , installed 2.1.13 Adapter "telegram" : 1.15.6 , installed 1.15.6 Adapter "trashschedule": 2.2.0 , installed 2.2.0 Adapter "vis" : 1.4.16 , installed 1.4.16 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.4 , installed 1.0.4 Adapter "vis-hqwidgets": 1.4.0 , installed 1.4.0 Adapter "vis-icontwo" : 0.94.0 , installed 0.94.0 Adapter "vis-inventwo" : 3.3.1 , installed 3.3.1 Adapter "vis-map" : 1.0.4 , installed 1.0.4 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-timeandweather": 1.2.2, installed 1.2.2 Adapter "vis-weather" : 2.5.6 , installed 2.5.6 Adapter "vw-connect" : 0.0.67 , installed 0.0.67 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "yahka" : 0.17.0 , installed 0.17.0 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 22941 States: 20154 *** OS-Repositories and Updates *** Hit:1 http://security.debian.org/debian-security bullseye-security InRelease Hit:2 http://deb.debian.org/debian bullseye InRelease Hit:3 http://deb.debian.org/debian bullseye-updates InRelease Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease Hit:5 https://repos.influxdata.com/debian stable InRelease Hit:6 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:7 https://apt.grafana.com stable InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 13248 740/iobroker.js-con tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 13255 740/iobroker.js-con tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 11262 565/sshd: /usr/sbin tcp 0 0 127.0.0.1:41421 0.0.0.0:* LISTEN 1001 21828 1642/io.yahka.0 tcp 0 0 127.0.0.1:8088 0.0.0.0:* LISTEN 999 14024 684/influxd tcp 0 0 0.0.0.0:35981 0.0.0.0:* LISTEN 1001 18744 1642/io.yahka.0 tcp6 0 0 :::61991 :::* LISTEN 1001 16222 1679/io.harmony.0 tcp6 0 0 :::3000 :::* LISTEN 109 15373 735/grafana tcp6 0 0 :::22 :::* LISTEN 0 11264 565/sshd: /usr/sbin tcp6 0 0 :::8082 :::* LISTEN 1001 19951 1482/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 14638 935/io.admin.0 tcp6 0 0 :::8087 :::* LISTEN 1001 19916 1493/io.simple-api. tcp6 0 0 :::8086 :::* LISTEN 999 12230 684/influxd tcp6 0 0 :::8084 :::* LISTEN 1001 21568 1771/io.ws.0 udp 0 0 0.0.0.0:5353 0.0.0.0:* 108 11223 449/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 15918 1215/io.shelly.0 udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12140 680/dhcpcd udp 0 0 0.0.0.0:57516 0.0.0.0:* 108 11225 449/avahi-daemon: r udp 0 0 0.0.0.0:53421 0.0.0.0:* 1001 16850 1238/io.mihome-vacu udp 0 0 0.0.0.0:61991 0.0.0.0:* 1001 16223 1679/io.harmony.0 udp6 0 0 :::5353 :::* 108 11224 449/avahi-daemon: r udp6 0 0 :::58916 :::* 108 11226 449/avahi-daemon: r *** Log File - Last 25 Lines *** 2023-06-30 14:38:56.492 - info: sourceanalytix.0 (1723) Initialization of 0_userdata.0.Strom.WallboxGaN_Vortagesverbrauch_Gesamt successfully 2023-06-30 14:38:56.515 - info: sourceanalytix.0 (1723) Successfully activated SourceAnalytix for 8 of 8 states, will do my Job until you stop me! 2023-06-30 14:38:57.184 - info: meross.0 (1063) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available 2023-06-30 14:38:57.185 - warn: meross.0 (1063) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined 2023-06-30 14:39:00.105 - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 2062 2023-06-30 14:39:03.697 - info: powerfox2.0 (2062) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v18.16.1, js-controller: 4.0.24 2023-06-30 14:39:05.531 - info: alexa2.0 (1245) Unknown Device, but enabling commands, Try it and report back if commands work. 2023-06-30 14:39:05.533 - info: alexa2.0 (1245) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2023-06-30 14:39:05.533 - info: alexa2.0 (1245) Device-type:A93SQJNJQLDSS - TV Schlafzimmer (CHANGE_NAME,SHARKNADO,MULTI_WAKEWORDS_SUPPORTED,SUPPORTS_LOCALE_SWITCH,SUPPORTS_LOCALE,ACTIVE_AFTER_FRO,SPEECH_RECOGNIZER_USS,VOLUME_SETTING,TIMERS_AND_ALARMS,PERSISTENT_CONNECTION,ARTHUR_TARGET,EQUALIZER_CONTROLLER_MIDRANGE,DIALOG_INTERFACE_VERSION,SOUND_SETTINGS,SUPPORTS_CONNECTED_HOME_CLOUD_ONLY,MICROPHONE,ADAPTIVE_LISTENING,SUPPORTS_SOFTWARE_VERSION,CUSTOM_ALARM_TONE,EARCONS,REMINDERS,FLASH_BRIEFING,AUDIO_CONTROLS) 2023-06-30 14:39:08.790 - info: powerfox2.0 (2062) Terminated (NO_ERROR): Without reason 2023-06-30 14:39:09.497 - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR) 2023-06-30 14:39:17.583 - info: alexa2.0 (1245) Unknown Device, but enabling commands, Try it and report back if commands work. 2023-06-30 14:39:17.584 - info: alexa2.0 (1245) Report to developer as GitHub issue with details for device. Please grab full next line pot. from logfile on disk if cutted 2023-06-30 14:39:17.585 - info: alexa2.0 (1245) Device-type:A2N49KXGVA18AR - Philipps Fire (NO_TIME_ZONE_SETTING,ASX_TIME_ZONE,MICROPHONE,VOLUME_SETTING,ADAPTIVE_LISTENING,SUPPORTS_SOFTWARE_VERSION,TIMERS_AND_ALARMS,PERSISTENT_CONNECTION,REMINDERS) 2023-06-30 14:39:47.062 - info: alexa2.0 (1245) No smart home devices to query 2023-06-30 14:39:48.509 - info: alexa2.0 (1245) Subscribing to states... 2023-06-30 14:39:48.516 - info: alexa2.0 (1245) Deleting the following states: ["Smart-Home-Devices.674b986c-8600-46d2-b55a-79256dd7b23a","Smart-Home-Devices.76e08de5-544c-461e-b3b1-38206f1e9adb","Smart-Home-Devices.3e38aed4-a9fb-4880-9d19-79fd38b767c5","Smart-Home-Devices.d09edd9e-20d7-4035-bffa-11105126fcd0","Smart-Home-Devices.ed7448e1-96f9-4f3b-837e-f9e7f37fccb1","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7","Smart-Home-Devices.37655abf-083c-4fd1-8e96-703a962c1a4c","Smart-Home-Devices.674b986c-8600-46d2-b55a-79256dd7b23a.#enabled","Smart-Home-Devices.674b986c-8600-46d2-b55a-79256dd7b23a.#delete","Smart-Home-Devices.674b986c-8600-46d2-b55a-79256dd7b23a.powerState","Smart-Home-Devices.674b986c-8600-46d2-b55a-79256dd7b23a.connectivity","Smart-Home-Devices.674b986c-8600-46d2-b55a-79256dd7b23a.connectivity-reason","Smart-Home-Devices.674b986c-8600-46d2-b55a-79256dd7b23a.#query","Smart-Home-Devices.76e08de5-544c-461e-b3b1-38206f1e9adb.#enabled","Smart-Home-Devices.76e08de5-544c-461e-b3b1-38206f1e9adb.#delete","Smart-Home-Devices.76e08de5-544c-461e-b3b1-38206f1e9adb.powerState","Smart-Home-Devices.76e08de5-544c-461e-b3b1-38206f1e9adb.connectivity","Smart-Home-Devices.76e08de5-544c-461e-b3b1-38206f1e9adb.connectivity-reason","Smart-Home-Devices.76e08de5-544c-461e-b3b1-38206f1e9adb.#query","Smart-Home-Devices.3e38aed4-a9fb-4880-9d19-79fd38b767c5.#enabled","Smart-Home-Devices.3e38aed4-a9fb-4880-9d19-79fd38b767c5.#delete","Smart-Home-Devices.3e38aed4-a9fb-4880-9d19-79fd38b767c5.powerState","Smart-Home-Devices.3e38aed4-a9fb-4880-9d19-79fd38b767c5.connectivity","Smart-Home-Devices.3e38aed4-a9fb-4880-9d19-79fd38b767c5.connectivity-reason","Smart-Home-Devices.3e38aed4-a9fb-4880-9d19-79fd38b767c5.#query","Smart-Home-Devices.d09edd9e-20d7-4035-bffa-11105126fcd0.#enabled","Smart-Home-Devices.d09edd9e-20d7-4035-bffa-11105126fcd0.#delete","Smart-Home-Devices.d09edd9e-20d7-4035-bffa-11105126fcd0.powerState","Smart-Home-Devices.d09edd9e-20d7-4035-bffa-11105126fcd0.connectivity","Smart-Home-Devices.d09edd9e-20d7-4035-bffa-11105126fcd0.connectivity-reason","Smart-Home-Devices.d09edd9e-20d7-4035-bffa-11105126fcd0.#query","Smart-Home-Devices.ed7448e1-96f9-4f3b-837e-f9e7f37fccb1.#enabled","Smart-Home-Devices.ed7448e1-96f9-4f3b-837e-f9e7f37fccb1.#delete","Smart-Home-Devices.ed7448e1-96f9-4f3b-837e-f9e7f37fccb1.powerState","Smart-Home-Devices.ed7448e1-96f9-4f3b-837e-f9e7f37fccb1.connectivity","Smart-Home-Devices.ed7448e1-96f9-4f3b-837e-f9e7f37fccb1.connectivity-reason","Smart-Home-Devices.ed7448e1-96f9-4f3b-837e-f9e7f37fccb1.#query","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.#delete","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.powerState","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.brightness","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.colorName","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.color-hue","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.color-saturation","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.color-brightness","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.colorRgb","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.colorTemperatureName","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.colorTemperatureInKelvin","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.connectivity","Smart-Home-Devices.1e4da5c0-6a72-4da4-a3b4-31b2701acbf7.connectivity-reason","Smart-Home-Devices.37655abf-083c-4fd1-8e96-703a962c1a4c.#enabled","Smart-Home-Devices.37655abf-083c-4fd1-8e96-703a962c1a4c.#delete","Smart-Home-Devices.37655abf-083c-4fd1-8e96-703a962c1a4c.powerState","Smart-Home-Devices.37655abf-083c-4fd1-8e96-703a962c1a4c.connectivity","Smart-Home-Devices.37655abf-083c-4fd1-8e96-703a962c1a4c.connectivity-reason","Smart-Home-Devices.37655abf-083c-4fd1-8e96-703a962c1a4c.#query","Smart-Home-Devices.674b986c-8600-46d2-b55a-79256dd7b23a.#includeInAllQuery","Smart-Home-Devices.76e08de5-544c-461e-b3b1-38206f1e9adb.#includeInAllQuery","Smart-Home-Devices.d09edd9e-20d7-4035-bffa-11105126fcd0.#includeInAllQuery","Smart-Home-Devices.ed7448e1-96f9-4f3b-837e-f9e7f37fccb1.#includeInAllQuery"] 2023-06-30 14:39:50.615 - info: alexa2.0 (1245) Alexa-Push-Connection (macDms = true) established. Disable Polling 2023-06-30 14:40:00.573 - info: host.smarthome instance system.adapter.powerfox2.0 started with pid 2419 2023-06-30 14:40:03.328 - info: meross.0 (1063) Can not get Data for Device 2204268862707951070248e1e9904eb1: Error: Device has no data connection available 2023-06-30 14:40:03.329 - warn: meross.0 (1063) Can not get Data for Device 2204268862707951070248e1e9904eb1: undefined 2023-06-30 14:40:04.250 - info: powerfox2.0 (2419) starting. Version 0.0.12 in /opt/iobroker/node_modules/iobroker.powerfox2, node: v18.16.1, js-controller: 4.0.24 2023-06-30 14:40:06.674 - info: powerfox2.0 (2419) Terminated (NO_ERROR): Without reason 2023-06-30 14:40:07.276 - info: host.smarthome instance system.adapter.powerfox2.0 terminated with code 0 (NO_ERROR) 2023-06-30 14:40:08.594 - info: alexa2.0 (1245) Initialization Done ... -
Dann kannste ja jetzt die beiden Adapter noch hochziehen.
-
@thomas-braun
das hätte ich vorher schon gekonnt - das hat komischerweise mit der alten repo Einstellung auch funktioniert. Die anderen Updates bis auf die zwei hatte ich ja noch vor dem live dingens gemacht. Die zwei waren mit verschiedenen Adapter Versionen ein schönes gefrickel bis sie liefen. Deswegen traute ich mit da noch nicht ran. Ich zieh mir jetzt nochmal ein image und wage es dann.
