[gelöst]hqWidgets Dimmer läuft Amok

Bluefox

Ich habe mit rolladen gespielt (und github version) und kann nicht reproduzieren.

Wie kann ich das reproduzieren? Kann es sein, dass es doch nicht die neueste Version von git ist?

Was sieht ihr in:

/opt/iobroker/iobroker-data/files/vis/widgets/hqwidgets.html?

Zeile 4:

version: "0.1.1"

looxer01

Hallo Bluefox,

unten der Code der Datei. Keine Spur von Verion in Zeile 4. Mache ich was falsch ?

hier der genutzte Pfad: /opt/iobroker/iobroker-data/files/vis/widgets

es gibt übrigens zwei Files: hqwidgets.html vom 14.08. und hqWidgets.html vom 10.07.

vG L…

! ```
[/orange]

Bluefox

Das ist definitiv alte Version.

Mach bitte folgendes (nur auf nicht Produktiv-System):

cd /opt/iobroker
iobroker stop
npm install https://github.com/ioBroker/ioBroker.js-controller/tarball/master
npm install https://github.com/ioBroker/ioBroker.vis/tarball/master
npm install https://github.com/ioBroker/ioBroker.vis-hqwidgets/tarball/master
npm install iobroker.admin
iobroker start

looxer01

ok, mache ich dann.

allerdings habe ich zwischenzeitlich viel Arbeit in die Installation gesteckt. Ich bin nahe am produktiven Einsatz damit.

Ich kann ja den Folder mit Subfolder iobroker komplett kopieren als BackUp.

Muss ich dann nach Ausführung der Installationen auf jeden Fall zurück oder nur, wenn es nicht klappt ?

vG L..

Bluefox

~~@looxer01:~~

ok, mache ich dann.

allerdings habe ich zwischenzeitlich viel Arbeit in die Installation gesteckt. Ich bin nahe am produktiven Einsatz damit.

Ich kann ja den Folder mit Supfolder iobroker komplett kopieren als BackUp.

vG L.. `
Ich empfehle ioBroker zu stoppen, kopieren und dann starten.

> Muss ich dann nach Ausführung der Installationen auf jeden Fall zurück oder nur, wenn es nicht klappt ?
Nur wenn es nicht klappt. Das was du installierst, wird dann "produktiv", falls du OK sagst. :lol:

looxer01

Hi Bluefox,

so, die Installation ist durchgegangen.

Das Symptom ist allerdings noch da.

Anbei mal das Widget. Vielleicht ist da was zu erkennen

EDIT: irgendwie habe ich jetzt auch einige Fehler im Log. siehe unten


    ioBroker.admin
    Adapter
    Instanzen
    Objekte
    Zustände
    Ereignisse
    Gruppen
    Benutzer
    Aufzählungen
    Hosts
    Log
    Scripte
    node-red.0

Admin

Log 	Log-Größe: 9.53 MB  	
Zeit 	
Nachricht
host-raspberrypi	2015-08-15 17:39:27	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:39:21	error	15 Aug 17:39:21 - [error] Error: port in use
node-red-0	2015-08-15 17:39:21	error	15 Aug 17:39:21 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:39:20	error	instance system.adapter.web.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:39:20	error	instance system.adapter.admin.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:39:19	error	instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:39:17	error	instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception)
host-raspberrypi	2015-08-15 17:39:09	error	instance system.adapter.hue.0 terminated with code 1 ()
hue-0	2015-08-15 17:39:09	error	{"message":"unauthorized user","type":1,"address":"/"}
host-raspberrypi	2015-08-15 17:39:09	error	instance system.adapter.history.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:39:05	error	instance system.adapter.sonos.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:39:02	error	15 Aug 17:39:02 - [error] Error: port in use
node-red-0	2015-08-15 17:39:02	error	15 Aug 17:39:02 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:39:01	error	instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:39:00	error	instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:54	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:45	error	instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:44	error	instance system.adapter.web.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:43	error	instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception)
host-raspberrypi	2015-08-15 17:38:41	error	instance system.adapter.admin.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:38:41	error	15 Aug 17:38:41 - [error] Error: port in use
node-red-0	2015-08-15 17:38:41	error	15 Aug 17:38:41 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:38:36	error	instance system.adapter.history.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:35	error	instance system.adapter.hue.0 terminated with code 1 ()
hue-0	2015-08-15 17:38:35	error	{"message":"unauthorized user","type":1,"address":"/"}
host-raspberrypi	2015-08-15 17:38:32	error	instance system.adapter.sonos.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:28	error	instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:25	error	instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:38:21	error	15 Aug 17:38:21 - [error] Error: port in use
node-red-0	2015-08-15 17:38:21	error	15 Aug 17:38:21 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:38:21	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:12	error	instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:11	error	instance system.adapter.web.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:38:09	error	instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception)
host-raspberrypi	2015-08-15 17:38:05	error	instance system.adapter.admin.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:38:03	error	15 Aug 17:38:03 - [error] Error: port in use
node-red-0	2015-08-15 17:38:03	error	15 Aug 17:38:03 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:38:03	error	instance system.adapter.history.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:59	error	instance system.adapter.hue.0 terminated with code 1 ()
hue-0	2015-08-15 17:37:59	error	{"message":"unauthorized user","type":1,"address":"/"}
host-raspberrypi	2015-08-15 17:37:58	error	instance system.adapter.sonos.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:55	error	instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:51	error	instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:48	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:37:39	error	15 Aug 17:37:39 - [error] Error: port in use
node-red-0	2015-08-15 17:37:39	error	15 Aug 17:37:39 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:37:39	error	instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:37	error	instance system.adapter.web.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:36	error	instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception)
host-raspberrypi	2015-08-15 17:37:29	error	instance system.adapter.history.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:25	error	instance system.adapter.admin.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:21	error	instance system.adapter.sonos.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:21	error	instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:37:21	error	15 Aug 17:37:21 - [error] Error: port in use
node-red-0	2015-08-15 17:37:21	error	15 Aug 17:37:21 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:37:20	error	instance system.adapter.hue.0 terminated with code 1 ()
hue-0	2015-08-15 17:37:20	error	{"message":"unauthorized user","type":1,"address":"/"}
host-raspberrypi	2015-08-15 17:37:16	error	instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:15	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:07	error	instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:04	error	instance system.adapter.web.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:37:02	error	instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception)
node-red-0	2015-08-15 17:37:01	error	15 Aug 17:37:01 - [error] Error: port in use
node-red-0	2015-08-15 17:37:01	error	15 Aug 17:37:01 - [error] Unable to listen on http://127.0.0.1:1880/
node-red-0	2015-08-15 17:36:00	error	15 Aug 17:36:00 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:36:57	error	instance system.adapter.history.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:45	error	instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:44	error	instance system.adapter.sonos.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:43	error	instance system.adapter.admin.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:41	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:41	error	instance system.adapter.hue.0 terminated with code 1 ()
hue-0	2015-08-15 17:36:41	error	{"message":"unauthorized user","type":1,"address":"/"}
host-raspberrypi	2015-08-15 17:36:41	error	instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:36:40	error	15 Aug 17:36:40 - [error] Error: port in use
node-red-0	2015-08-15 17:36:40	error	15 Aug 17:36:40 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:36:34	error	instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:30	error	instance system.adapter.web.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:28	error	instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception)
host-raspberrypi	2015-08-15 17:36:23	error	instance system.adapter.history.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:36:19	error	15 Aug 17:36:19 - [error] Error: port in use
node-red-0	2015-08-15 17:36:19	error	15 Aug 17:36:19 - [error] Unable to listen on http://127.0.0.1:1880/
host-raspberrypi	2015-08-15 17:36:13	error	instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:08	error	instance system.adapter.sonos.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:07	error	instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:05	error	instance system.adapter.admin.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:05	error	instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running)
host-raspberrypi	2015-08-15 17:36:04	error	instance system.adapter.hue.0 terminated with code 1 ()
hue-0	2015-08-15 17:36:04	error	{"message":"unauthorized user","type":1,"address":"/"}
host-raspberrypi	2015-08-15 17:36:02	error	instance system.adapter.node-red.0 terminated with code 7 (Adapter already running)
node-red-0	2015-08-15 17:36:00	error	15 Aug 17:36:00 - [error] Error: port in use

[{"tpl":"tplHqDimmer","data":{"visibility-cond":"==","visibility-val":1,"oid":"hm-rpc.0.JEQ0199306.1.LEVEL","unit":"%","min":"0","max":"100","digits":"0","is_comma":"true","iconName":"img/bulb_off.png","btIconWidth":"32","offsetAuto":true,"leftOffset":"27","topOffset":"55","circleWidth":"25","showValue":true,"timeAsInterval":true,"infoLeftFontSize":"12","infoFontRightSize":"12","alwaysShow":false,"oid-working":"","name":"Licht WZ Esstisch Dimmer","filterkey":"Licht"},"style":{"left":"679px","top":"135px","width":"35px","height":"33px","z-index":"8","border-radius":"16px"},"widgetSet":"hqwidgets"}]

dann der Code von hqwidget.html (scheint noch der alte zu sein?)

[/orange]

Bluefox

Starte deine Kiste neu. Du hast 2 Instanzen von ioBroker am laufen.

looxer01

ups - jap. habe jetzt neu gestartet und das Log ist sauber.

Aber das Problem mit dem Widget ist noch da.

Kann ich noch was machen ? Ich würde nur sehr ungern iobroker neu installieren.

Bluefox

Welche Version zeigt bei dir vis-hqwidgets?

looxer01

Admin zeigt 0.1.1

Bluefox

Wenn du tatsächlich neueste js-controller hast, dann sollte bei dir 100% das funktionieren:

iobroker upload vis-hqwidgets

Danach versuche cache zu löschen.

looxer01

nicht ganz. Ich sehe 0.77 installiert und eigentlich sollte 0.78 verfügbar sein ?

allerdings gibt es keinen update button bei mir. nach ./iobroker upgrade auch nicht

Bluefox

> nicht ganz. Ich sehe 0.77 installiert und eigentlich sollte 0.78 verfügbar sein ?
Ist doch 0.7.8 installiert. ;)

0.7.8 ist noch nicht freigegeben. Man kann die nicht über admin installieren.

looxer01

…oooh mann, hast natürlich recht. habe ich irgendwie andersherum gelesen.

aber leider.... :(

gleiches Symptom; der Dimmer flackert irgendwie zufällig zwischen 1% und 100%

looxer01

Ich habe es jetzt auch nochmal mit einem anderen Dimmer (Steckdosendimmer) versucht.

Gleicher Effekt.

und so sieht es dann im log aus:

2015-08-16 11:30:11.413  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:12.274  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.01}] FLOAT
2015-08-16 11:30:12.644  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:13.586  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.21}] FLOAT
2015-08-16 11:30:13.949  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:14.909  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.4}] FLOAT
2015-08-16 11:30:15.282  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:16.244  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.52}] FLOAT
2015-08-16 11:30:16.666  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:17.609  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.6}] FLOAT
2015-08-16 11:30:18.008  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:18.990  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.7}] FLOAT
2015-08-16 11:30:19.341  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:20.360  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.76}] FLOAT
2015-08-16 11:30:20.692  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:21.676  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.81}] FLOAT
2015-08-16 11:30:21.996  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:22.987  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.85}] FLOAT
2015-08-16 11:30:23.297  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:24.286  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.88}] FLOAT
2015-08-16 11:30:24.628  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-08-16 11:30:25.675  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT
2015-08-16 11:30:26.157  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.99}] FLOAT
2015-08-16 11:30:27.158  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.92}] FLOAT
2015-08-16 11:30:27.245  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.95}] FLOAT
2015-08-16 11:30:28.245  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.78}] FLOAT
2015-08-16 11:30:28.568  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.95}] FLOAT
2015-08-16 11:30:29.560  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.82}] FLOAT
2015-08-16 11:30:30.168  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT
2015-08-16 11:30:31.008  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.7}] FLOAT
2015-08-16 11:30:31.454  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT
2015-08-16 11:30:32.407  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.72}] FLOAT
2015-08-16 11:30:32.764  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT
2015-08-16 11:30:33.746  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.76}] FLOAT
2015-08-16 11:30:34.086  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT
2015-08-16 11:30:35.086  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.79}] FLOAT
2015-08-16 11:30:35.458  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT
2015-08-16 11:30:36.451  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.8}] FLOAT
2015-08-16 11:30:36.813  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT
2015-08-16 11:30:37.792  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.89}] FLOAT
2015-08-16 11:30:38.124  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.01}] FLOAT
2015-08-16 11:30:39.188  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.71}] FLOAT
2015-08-16 11:30:39.730  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.02}] FLOAT
2015-08-16 11:30:40.719  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.71}] FLOAT
2015-08-16 11:30:41.280  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.03}] FLOAT
2015-08-16 11:30:42.269  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.71}] FLOAT
2015-08-16 11:30:42.603  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.04}] FLOAT
2015-08-16 11:30:43.569  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.57}] FLOAT
2015-08-16 11:30:43.947  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.07}] FLOAT
2015-08-16 11:30:44.901  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.49}] FLOAT
2015-08-16 11:30:45.271  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.08}] FLOAT
2015-08-16 11:30:46.203  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.41}] FLOAT
2015-08-16 11:30:46.874  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.09}] FLOAT
2015-08-16 11:30:47.856  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.39}] FLOAT
2015-08-16 11:30:48.273  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.1}] FLOAT
2015-08-16 11:30:49.239  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.33}] FLOAT
2015-08-16 11:30:49.627  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.11}] FLOAT
2015-08-16 11:30:50.631  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.28}] FLOAT
2015-08-16 11:30:51.117  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.12}] FLOAT
2015-08-16 11:30:52.088  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.19}] FLOAT
2015-08-16 11:30:52.493  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.86}] FLOAT
2015-08-16 11:30:53.457  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.33}] FLOAT
2015-08-16 11:30:53.897  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.86}] FLOAT
2015-08-16 11:30:54.870  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.38}] FLOAT
2015-08-16 11:30:55.273  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.86}] FLOAT
2015-08-16 11:30:56.231  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.82}] FLOAT
2015-08-16 11:30:56.648  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:30:57.633  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.68}] FLOAT
2015-08-16 11:30:58.043  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:30:58.948  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.57}] FLOAT
2015-08-16 11:30:59.431  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:31:00.392  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.55}] FLOAT
2015-08-16 11:31:00.790  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:31:01.755  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.47}] FLOAT
2015-08-16 11:31:02.091  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:31:03.114  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.4}] FLOAT
2015-08-16 11:31:03.481  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:31:04.446  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.34}] FLOAT
2015-08-16 11:31:04.794  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:31:05.819  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.3}] FLOAT
2015-08-16 11:31:06.180  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:31:07.115  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.27}] FLOAT
2015-08-16 11:31:07.522  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:31:08.511  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.25}] FLOAT
2015-08-16 11:31:08.934  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT
2015-08-16 11:31:09.906  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.23}] FLOAT
2015-08-16 11:31:10.414  - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.01}] FLOAT

mitterweile tritt es jetzt auch mit DashUI auf. Das war noch nie der Fall.

Ausschalten geht auch nur noch mit dem Dimmer selber, mit langem Tastendruck.

und dann habe ich noch gesehen, dass wir nicht die einzigen sind:

http://forum.iobroker.com/viewtopic.php … f807#p9154

aber das Thema scheint dort nicht gelöst worden zu sein.

elmar

So, nach ein wenig Funkstille bin ich jetzt nochmal dazu gekommen zu testen: Ergebnis vorweg: Kein Amoklauf mehr, aber immer noch kein korrektes Verhalten

Versionen:

root@heimatpi:/opt/iobroker# iobroker list adapters
system.adapter.admin                   : admin       - 0.5.9
system.adapter.history                 : history     - 0.1.3
system.adapter.web                     : web         - 0.4.3
system.adapter.rickshaw                : rickshaw    - 0.2.2
system.adapter.onkyo                   : onkyo       - 0.1.9
system.adapter.hm-rpc                  : hm-rpc      - 0.5.2
system.adapter.vis                     : vis         - 0.6.13
system.adapter.vis-hqwidgets           : vis-hqwidgets - 0.1.1
system.adapter.vis-bars                : vis-bars    - 0.1.0
system.adapter.hm-rega                 : hm-rega     - 0.2.2

Wie ich die Version von js-controller herausbekomme ist mir nicht ganz klar. Ich habe aber direkt vor diesem Test auf den jeweils neuesten master von github geupdatet (vis/hqwidgets/js-controller)

Verhalten bei Switch:

1. Switch aus (in diesem Fall Steckdose)

2. Switch über vis hqwidget anschalten

3. Logfile zeigt zwei Log Einträge

2015-09-13 11:10:12.459  - info: hm-rpc.0 setValue ["JEQ0463281:1","STATE",true] BOOL
2015-09-13 11:10:12.469  - info: hm-rpc.0 setValue ["JEQ0463281:1","STATE",true] BOOL

Verhalten bei Schalter UP Dose identisch

2015-09-13 11:19:50.740  - info: hm-rpc.0 setValue ["JEQ0033148:1","STATE",true] BOOL
2015-09-13 11:19:50.744  - info: hm-rpc.0 setValue ["JEQ0033148:1","STATE",true] BOOL

Verhalten bei Steckdosendimmer

1. Dimmer ist aus

2. Mit der Maus 75% einstellen

Logfile zeigt folgendes

2015-09-13 11:20:56.333  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0}] FLOAT
2015-09-13 11:20:56.340  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0}] FLOAT
2015-09-13 11:21:12.630  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT
2015-09-13 11:21:12.636  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT
2015-09-13 11:21:13.732  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.4}] FLOAT
2015-09-13 11:21:13.736  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.4}] FLOAT
2015-09-13 11:21:14.345  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT
2015-09-13 11:21:14.357  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT
2015-09-13 11:21:15.598  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.62}] FLOAT
2015-09-13 11:21:15.607  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.62}] FLOAT
2015-09-13 11:21:16.488  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT
2015-09-13 11:21:16.497  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT
2015-09-13 11:21:17.437  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.7}] FLOAT
2015-09-13 11:21:17.441  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.7}] FLOAT
2015-09-13 11:21:17.774  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT
2015-09-13 11:21:17.782  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT
2015-09-13 11:21:18.745  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.73}] FLOAT
2015-09-13 11:21:18.753  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.73}] FLOAT
2015-09-13 11:21:19.031  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT
2015-09-13 11:21:19.035  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT
2015-09-13 11:21:19.999  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT
2015-09-13 11:21:20.008  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT

Auch hier kommt jedes Event zweimal. Erstens überrascht mich, dass der Dimmer zuerst auf 0 gesetzt wird. Dann wird im zweiten Schritt die tatsächlich erwünschten 75% gesendet. Und dann fängt er sich langsam "einzuschwingen" bzw. asymptotisch zu nähern.

Alternativlogeinträge bei einfachem Klick auf den Dimmer:

2015-09-13 11:23:46.440  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0}] FLOAT
2015-09-13 11:23:46.458  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0}] FLOAT
2015-09-13 11:23:48.523  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-09-13 11:23:48.535  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-09-13 11:23:49.532  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.55}] FLOAT
2015-09-13 11:23:49.542  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.55}] FLOAT
2015-09-13 11:23:50.142  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-09-13 11:23:50.149  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":1}] FLOAT
2015-09-13 11:23:51.148  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.83}] FLOAT
2015-09-13 11:23:51.155  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.83}] FLOAT
2015-09-13 11:23:51.399  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT
2015-09-13 11:23:51.406  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT
2015-09-13 11:23:52.407  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.93}] FLOAT
2015-09-13 11:23:52.421  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.93}] FLOAT
2015-09-13 11:23:52.658  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT
2015-09-13 11:23:52.665  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT
2015-09-13 11:23:53.663  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT
2015-09-13 11:23:53.675  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT

Bei UP Dimmer identisches Verhalten.

Getestet mit jeweils aktuellem Internet Explorer/Firefox/Chrome auf Windows 8.1 mit aktuellem Patch Level. Sowie Safari unter aktuellem iOS.

Kurioserweise sind die ersten drei Logwerte immer identisch 1, 0,57, 1 und dann geht es in Richtung 0,8x und schwingt sich in Richtung 0,9x ein

Zweites beobachtetes Kuriosum: Wenn zwei Browserfenster geöffnet sind, dann läuft wieder alles Amok. Auch wenn ein Browser auf iOS und der andere auf Windows läuft.

elmar

Der Vollständigkeit halber sollte ich vielleicht noch erwähnen, dass es sich um einen Laptop mit Touchscreen handelt. Die Touch Funktionalität ist jedoch in der Registry abgeklemmt.

elmar

Nach weiterem probieren komme ich zu dem Schluss, dass das Problem grundsätzlich im ioBroker zu suchen ist. Es hat nichts mit den hqwidgets zu tun.

1. Beobachtung: Das Verhalten mit den jqui Widget dimmer ctrl ist absolut identisch

2. Beobachtung: Es wird total seltsam, wenn man ein lichtsteuerndes Programm auf der CCU aufruft

1. In Vis einen Button einfügen

2. Object ID auf das ProgramExecute setzen

3. "value" auf "true"

4. Den Button in der vis anklicken

5. Jetzt laufen alle Lampen, die über das Programm angesteuert werden Amok

Logfile zeigt folgendes (kurzer Ausschnitt)

2015-09-13 17:23:37.572  - error: hm-rpc.0 Error: You are sending too fast
2015-09-13 17:23:37.611  - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.08}] FLOAT
2015-09-13 17:23:38.188  - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.09}] FLOAT
2015-09-13 17:23:38.226  - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.09}] FLOAT
2015-09-13 17:23:38.463  - info: hm-rpc.0 setValue ["JEQ0200241:1","LEVEL",{"explicitDouble":0.12}] FLOAT
2015-09-13 17:23:38.471  - info: hm-rpc.0 setValue ["JEQ0200241:1","LEVEL",{"explicitDouble":0.12}] FLOAT
2015-09-13 17:23:38.474  - error: hm-rpc.0 binrpc -> setValue ["1","LEVEL",0.12] FLOAT
2015-09-13 17:23:38.475  - error: hm-rpc.0 Error: You are sending too fast
2015-09-13 17:23:39.196  - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.09}] FLOAT
2015-09-13 17:23:39.282  - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.09}] FLOAT
2015-09-13 17:23:39.392  - info: hm-rpc.0 setValue ["JEQ0200292:1","LEVEL",{"explicitDouble":0.02}] FLOAT
2015-09-13 17:23:39.392  - info: hm-rpc.0 setValue ["JEQ0200292:1","LEVEL",{"explicitDouble":0.02}] FLOAT
2015-09-13 17:23:39.395  - error: hm-rpc.0 binrpc -> setValue ["1","LEVEL",0.02] FLOAT
2015-09-13 17:23:39.397  - error: hm-rpc.0 Error: You are sending too fast
2015-09-13 17:23:39.956  - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.03}] FLOAT
2015-09-13 17:23:39.971  - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.03}] FLOAT
2015-09-13 17:23:40.063  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.02}] FLOAT
2015-09-13 17:23:40.113  - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.02}] FLOAT
2015-09-13 17:23:40.115  - error: hm-rpc.0 binrpc -> setValue ["1","LEVEL",0.02] FLOAT
2015-09-13 17:23:40.117  - error: hm-rpc.0 Error: You are sending too fast
2015-09-13 17:23:40.921  - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.3}] FLOAT
2015-09-13 17:23:40.926  - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.3}] FLOAT
2015-09-13 17:23:41.058  - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.1}] FLOAT
2015-09-13 17:23:41.061  - error: hm-rpc.0 binrpc -> setValue ["1","LEVEL",0.1] FLOAT
2015-09-13 17:23:41.062  - error: hm-rpc.0 Error: You are sending too fast
2015-09-13 17:23:41.065  - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.1}] FLOAT

Was mich total irritiert. Das Programm läuft ja auf der CCU … aber trotzdem wird im Logfile "setValue" geloggt. Wenn ich das Programm auf der CCU ausführe, dann werden die Werte in vis korrekt dargestellt. Das Logfile bleibt aber komplett leer.

Homoran

Ich weiß nicht wann genau, aber eben ist eine neue vis version gekommen.

Ich hatte eine neue Installation gemacht, unmittelbar danach war ein update da. jetzt 0.6.14.

~~@elmar:~~

Wie ich die Version von js-controller herausbekomme ist mir nicht ganz klar. `
steht im Reiter "hosts"

Gruß

Rainer

elmar

Jo, die ist bei mir auch neu … Installation läuft

Derweil js-controller: 0.7.11

Update fertig ...

Update von vis auf 0.6.14 bringt allerdings keine Änderung im beschriebenen Verhalten
6341_1_falscher_wert_gesendet.png

Community Forum

NEWS

[gelöst]hqWidgets Dimmer läuft Amok

Support us

640

32.6k

82.3k

1.3m