[gelöst]hqWidgets Dimmer läuft Amok
-
ok, mache ich dann.
allerdings habe ich zwischenzeitlich viel Arbeit in die Installation gesteckt. Ich bin nahe am produktiven Einsatz damit.
Ich kann ja den Folder mit Supfolder iobroker komplett kopieren als BackUp.
vG L.. `
Ich empfehle ioBroker zu stoppen, kopieren und dann starten.> Muss ich dann nach Ausführung der Installationen auf jeden Fall zurück oder nur, wenn es nicht klappt ?
Nur wenn es nicht klappt. Das was du installierst, wird dann "produktiv", falls du OK sagst. :lol: -
Hi Bluefox,
so, die Installation ist durchgegangen.
Das Symptom ist allerdings noch da.
Anbei mal das Widget. Vielleicht ist da was zu erkennen
EDIT: irgendwie habe ich jetzt auch einige Fehler im Log. siehe unten
ioBroker.admin Adapter Instanzen Objekte Zustände Ereignisse Gruppen Benutzer Aufzählungen Hosts Log Scripte node-red.0 Admin Log Log-Größe: 9.53 MB Zeit Nachricht host-raspberrypi 2015-08-15 17:39:27 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:39:21 error 15 Aug 17:39:21 - [error] Error: port in use node-red-0 2015-08-15 17:39:21 error 15 Aug 17:39:21 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:39:20 error instance system.adapter.web.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:39:20 error instance system.adapter.admin.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:39:19 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:39:17 error instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception) host-raspberrypi 2015-08-15 17:39:09 error instance system.adapter.hue.0 terminated with code 1 () hue-0 2015-08-15 17:39:09 error {"message":"unauthorized user","type":1,"address":"/"} host-raspberrypi 2015-08-15 17:39:09 error instance system.adapter.history.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:39:05 error instance system.adapter.sonos.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:39:02 error 15 Aug 17:39:02 - [error] Error: port in use node-red-0 2015-08-15 17:39:02 error 15 Aug 17:39:02 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:39:01 error instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:39:00 error instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:54 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:45 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:44 error instance system.adapter.web.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:43 error instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception) host-raspberrypi 2015-08-15 17:38:41 error instance system.adapter.admin.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:38:41 error 15 Aug 17:38:41 - [error] Error: port in use node-red-0 2015-08-15 17:38:41 error 15 Aug 17:38:41 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:38:36 error instance system.adapter.history.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:35 error instance system.adapter.hue.0 terminated with code 1 () hue-0 2015-08-15 17:38:35 error {"message":"unauthorized user","type":1,"address":"/"} host-raspberrypi 2015-08-15 17:38:32 error instance system.adapter.sonos.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:28 error instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:25 error instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:38:21 error 15 Aug 17:38:21 - [error] Error: port in use node-red-0 2015-08-15 17:38:21 error 15 Aug 17:38:21 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:38:21 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:12 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:11 error instance system.adapter.web.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:38:09 error instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception) host-raspberrypi 2015-08-15 17:38:05 error instance system.adapter.admin.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:38:03 error 15 Aug 17:38:03 - [error] Error: port in use node-red-0 2015-08-15 17:38:03 error 15 Aug 17:38:03 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:38:03 error instance system.adapter.history.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:59 error instance system.adapter.hue.0 terminated with code 1 () hue-0 2015-08-15 17:37:59 error {"message":"unauthorized user","type":1,"address":"/"} host-raspberrypi 2015-08-15 17:37:58 error instance system.adapter.sonos.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:55 error instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:51 error instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:48 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:37:39 error 15 Aug 17:37:39 - [error] Error: port in use node-red-0 2015-08-15 17:37:39 error 15 Aug 17:37:39 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:37:39 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:37 error instance system.adapter.web.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:36 error instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception) host-raspberrypi 2015-08-15 17:37:29 error instance system.adapter.history.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:25 error instance system.adapter.admin.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:21 error instance system.adapter.sonos.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:21 error instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:37:21 error 15 Aug 17:37:21 - [error] Error: port in use node-red-0 2015-08-15 17:37:21 error 15 Aug 17:37:21 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:37:20 error instance system.adapter.hue.0 terminated with code 1 () hue-0 2015-08-15 17:37:20 error {"message":"unauthorized user","type":1,"address":"/"} host-raspberrypi 2015-08-15 17:37:16 error instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:15 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:07 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:04 error instance system.adapter.web.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:37:02 error instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception) node-red-0 2015-08-15 17:37:01 error 15 Aug 17:37:01 - [error] Error: port in use node-red-0 2015-08-15 17:37:01 error 15 Aug 17:37:01 - [error] Unable to listen on http://127.0.0.1:1880/ node-red-0 2015-08-15 17:36:00 error 15 Aug 17:36:00 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:36:57 error instance system.adapter.history.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:45 error instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:44 error instance system.adapter.sonos.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:43 error instance system.adapter.admin.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:41 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:41 error instance system.adapter.hue.0 terminated with code 1 () hue-0 2015-08-15 17:36:41 error {"message":"unauthorized user","type":1,"address":"/"} host-raspberrypi 2015-08-15 17:36:41 error instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:36:40 error 15 Aug 17:36:40 - [error] Error: port in use node-red-0 2015-08-15 17:36:40 error 15 Aug 17:36:40 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:36:34 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:30 error instance system.adapter.web.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:28 error instance system.adapter.fritzbox.0 terminated with code 6 (uncaught exception) host-raspberrypi 2015-08-15 17:36:23 error instance system.adapter.history.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:36:19 error 15 Aug 17:36:19 - [error] Error: port in use node-red-0 2015-08-15 17:36:19 error 15 Aug 17:36:19 - [error] Unable to listen on http://127.0.0.1:1880/ host-raspberrypi 2015-08-15 17:36:13 error instance system.adapter.hm-rpc.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:08 error instance system.adapter.sonos.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:07 error instance system.adapter.hm-rega.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:05 error instance system.adapter.admin.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:05 error instance system.adapter.b-control-em.0 terminated with code 7 (Adapter already running) host-raspberrypi 2015-08-15 17:36:04 error instance system.adapter.hue.0 terminated with code 1 () hue-0 2015-08-15 17:36:04 error {"message":"unauthorized user","type":1,"address":"/"} host-raspberrypi 2015-08-15 17:36:02 error instance system.adapter.node-red.0 terminated with code 7 (Adapter already running) node-red-0 2015-08-15 17:36:00 error 15 Aug 17:36:00 - [error] Error: port in use[{"tpl":"tplHqDimmer","data":{"visibility-cond":"==","visibility-val":1,"oid":"hm-rpc.0.JEQ0199306.1.LEVEL","unit":"%","min":"0","max":"100","digits":"0","is_comma":"true","iconName":"img/bulb_off.png","btIconWidth":"32","offsetAuto":true,"leftOffset":"27","topOffset":"55","circleWidth":"25","showValue":true,"timeAsInterval":true,"infoLeftFontSize":"12","infoFontRightSize":"12","alwaysShow":false,"oid-working":"","name":"Licht WZ Esstisch Dimmer","filterkey":"Licht"},"style":{"left":"679px","top":"135px","width":"35px","height":"33px","z-index":"8","border-radius":"16px"},"widgetSet":"hqwidgets"}]dann der Code von hqwidget.html (scheint noch der alte zu sein?)
[/orange] -
Starte deine Kiste neu. Du hast 2 Instanzen von ioBroker am laufen.
-
ups - jap. habe jetzt neu gestartet und das Log ist sauber.
Aber das Problem mit dem Widget ist noch da.
Kann ich noch was machen ? Ich würde nur sehr ungern iobroker neu installieren.
-
Welche Version zeigt bei dir vis-hqwidgets?
-
Admin zeigt 0.1.1
-
Wenn du tatsächlich neueste js-controller hast, dann sollte bei dir 100% das funktionieren:
iobroker upload vis-hqwidgetsDanach versuche cache zu löschen.
-
nicht ganz. Ich sehe 0.77 installiert und eigentlich sollte 0.78 verfügbar sein ?
allerdings gibt es keinen update button bei mir. nach ./iobroker upgrade auch nicht
-
> nicht ganz. Ich sehe 0.77 installiert und eigentlich sollte 0.78 verfügbar sein ?
Ist doch 0.7.8 installiert.
0.7.8 ist noch nicht freigegeben. Man kann die nicht über admin installieren.
-
…oooh mann, hast natürlich recht. habe ich irgendwie andersherum gelesen.
aber leider....
gleiches Symptom; der Dimmer flackert irgendwie zufällig zwischen 1% und 100%
-
Ich habe es jetzt auch nochmal mit einem anderen Dimmer (Steckdosendimmer) versucht.
Gleicher Effekt.
und so sieht es dann im log aus:
2015-08-16 11:30:11.413 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:12.274 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.01}] FLOAT 2015-08-16 11:30:12.644 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:13.586 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.21}] FLOAT 2015-08-16 11:30:13.949 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:14.909 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.4}] FLOAT 2015-08-16 11:30:15.282 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:16.244 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.52}] FLOAT 2015-08-16 11:30:16.666 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:17.609 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.6}] FLOAT 2015-08-16 11:30:18.008 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:18.990 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.7}] FLOAT 2015-08-16 11:30:19.341 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:20.360 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.76}] FLOAT 2015-08-16 11:30:20.692 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:21.676 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.81}] FLOAT 2015-08-16 11:30:21.996 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:22.987 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.85}] FLOAT 2015-08-16 11:30:23.297 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:24.286 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.88}] FLOAT 2015-08-16 11:30:24.628 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-08-16 11:30:25.675 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT 2015-08-16 11:30:26.157 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.99}] FLOAT 2015-08-16 11:30:27.158 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.92}] FLOAT 2015-08-16 11:30:27.245 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.95}] FLOAT 2015-08-16 11:30:28.245 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.78}] FLOAT 2015-08-16 11:30:28.568 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.95}] FLOAT 2015-08-16 11:30:29.560 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.82}] FLOAT 2015-08-16 11:30:30.168 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT 2015-08-16 11:30:31.008 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.7}] FLOAT 2015-08-16 11:30:31.454 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT 2015-08-16 11:30:32.407 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.72}] FLOAT 2015-08-16 11:30:32.764 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT 2015-08-16 11:30:33.746 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.76}] FLOAT 2015-08-16 11:30:34.086 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT 2015-08-16 11:30:35.086 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.79}] FLOAT 2015-08-16 11:30:35.458 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT 2015-08-16 11:30:36.451 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.8}] FLOAT 2015-08-16 11:30:36.813 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.91}] FLOAT 2015-08-16 11:30:37.792 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.89}] FLOAT 2015-08-16 11:30:38.124 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.01}] FLOAT 2015-08-16 11:30:39.188 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.71}] FLOAT 2015-08-16 11:30:39.730 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.02}] FLOAT 2015-08-16 11:30:40.719 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.71}] FLOAT 2015-08-16 11:30:41.280 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.03}] FLOAT 2015-08-16 11:30:42.269 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.71}] FLOAT 2015-08-16 11:30:42.603 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.04}] FLOAT 2015-08-16 11:30:43.569 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.57}] FLOAT 2015-08-16 11:30:43.947 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.07}] FLOAT 2015-08-16 11:30:44.901 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.49}] FLOAT 2015-08-16 11:30:45.271 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.08}] FLOAT 2015-08-16 11:30:46.203 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.41}] FLOAT 2015-08-16 11:30:46.874 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.09}] FLOAT 2015-08-16 11:30:47.856 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.39}] FLOAT 2015-08-16 11:30:48.273 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.1}] FLOAT 2015-08-16 11:30:49.239 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.33}] FLOAT 2015-08-16 11:30:49.627 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.11}] FLOAT 2015-08-16 11:30:50.631 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.28}] FLOAT 2015-08-16 11:30:51.117 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.12}] FLOAT 2015-08-16 11:30:52.088 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.19}] FLOAT 2015-08-16 11:30:52.493 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.86}] FLOAT 2015-08-16 11:30:53.457 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.33}] FLOAT 2015-08-16 11:30:53.897 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.86}] FLOAT 2015-08-16 11:30:54.870 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.38}] FLOAT 2015-08-16 11:30:55.273 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.86}] FLOAT 2015-08-16 11:30:56.231 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.82}] FLOAT 2015-08-16 11:30:56.648 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:30:57.633 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.68}] FLOAT 2015-08-16 11:30:58.043 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:30:58.948 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.57}] FLOAT 2015-08-16 11:30:59.431 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:31:00.392 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.55}] FLOAT 2015-08-16 11:31:00.790 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:31:01.755 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.47}] FLOAT 2015-08-16 11:31:02.091 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:31:03.114 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.4}] FLOAT 2015-08-16 11:31:03.481 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:31:04.446 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.34}] FLOAT 2015-08-16 11:31:04.794 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:31:05.819 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.3}] FLOAT 2015-08-16 11:31:06.180 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:31:07.115 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.27}] FLOAT 2015-08-16 11:31:07.522 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:31:08.511 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.25}] FLOAT 2015-08-16 11:31:08.934 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.14}] FLOAT 2015-08-16 11:31:09.906 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.23}] FLOAT 2015-08-16 11:31:10.414 - info: hm-rpc.0 setValue ["JEQ0199306:1","LEVEL",{"explicitDouble":0.01}] FLOATmitterweile tritt es jetzt auch mit DashUI auf. Das war noch nie der Fall.
Ausschalten geht auch nur noch mit dem Dimmer selber, mit langem Tastendruck.
und dann habe ich noch gesehen, dass wir nicht die einzigen sind:
http://forum.iobroker.com/viewtopic.php … f807#p9154
aber das Thema scheint dort nicht gelöst worden zu sein.
-
So, nach ein wenig Funkstille bin ich jetzt nochmal dazu gekommen zu testen: Ergebnis vorweg: Kein Amoklauf mehr, aber immer noch kein korrektes Verhalten
Versionen:
root@heimatpi:/opt/iobroker# iobroker list adapters system.adapter.admin : admin - 0.5.9 system.adapter.history : history - 0.1.3 system.adapter.web : web - 0.4.3 system.adapter.rickshaw : rickshaw - 0.2.2 system.adapter.onkyo : onkyo - 0.1.9 system.adapter.hm-rpc : hm-rpc - 0.5.2 system.adapter.vis : vis - 0.6.13 system.adapter.vis-hqwidgets : vis-hqwidgets - 0.1.1 system.adapter.vis-bars : vis-bars - 0.1.0 system.adapter.hm-rega : hm-rega - 0.2.2Wie ich die Version von js-controller herausbekomme ist mir nicht ganz klar. Ich habe aber direkt vor diesem Test auf den jeweils neuesten master von github geupdatet (vis/hqwidgets/js-controller)
Verhalten bei Switch:
1. Switch aus (in diesem Fall Steckdose)
2. Switch über vis hqwidget anschalten
3. Logfile zeigt zwei Log Einträge
2015-09-13 11:10:12.459 - info: hm-rpc.0 setValue ["JEQ0463281:1","STATE",true] BOOL 2015-09-13 11:10:12.469 - info: hm-rpc.0 setValue ["JEQ0463281:1","STATE",true] BOOLVerhalten bei Schalter UP Dose identisch
2015-09-13 11:19:50.740 - info: hm-rpc.0 setValue ["JEQ0033148:1","STATE",true] BOOL 2015-09-13 11:19:50.744 - info: hm-rpc.0 setValue ["JEQ0033148:1","STATE",true] BOOLVerhalten bei Steckdosendimmer
1. Dimmer ist aus
2. Mit der Maus 75% einstellen
Logfile zeigt folgendes
2015-09-13 11:20:56.333 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0}] FLOAT 2015-09-13 11:20:56.340 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0}] FLOAT 2015-09-13 11:21:12.630 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT 2015-09-13 11:21:12.636 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT 2015-09-13 11:21:13.732 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.4}] FLOAT 2015-09-13 11:21:13.736 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.4}] FLOAT 2015-09-13 11:21:14.345 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT 2015-09-13 11:21:14.357 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT 2015-09-13 11:21:15.598 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.62}] FLOAT 2015-09-13 11:21:15.607 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.62}] FLOAT 2015-09-13 11:21:16.488 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT 2015-09-13 11:21:16.497 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.75}] FLOAT 2015-09-13 11:21:17.437 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.7}] FLOAT 2015-09-13 11:21:17.441 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.7}] FLOAT 2015-09-13 11:21:17.774 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT 2015-09-13 11:21:17.782 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT 2015-09-13 11:21:18.745 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.73}] FLOAT 2015-09-13 11:21:18.753 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.73}] FLOAT 2015-09-13 11:21:19.031 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT 2015-09-13 11:21:19.035 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT 2015-09-13 11:21:19.999 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOAT 2015-09-13 11:21:20.008 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.74}] FLOATAuch hier kommt jedes Event zweimal. Erstens überrascht mich, dass der Dimmer zuerst auf 0 gesetzt wird. Dann wird im zweiten Schritt die tatsächlich erwünschten 75% gesendet. Und dann fängt er sich langsam "einzuschwingen" bzw. asymptotisch zu nähern.
Alternativlogeinträge bei einfachem Klick auf den Dimmer:
2015-09-13 11:23:46.440 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0}] FLOAT 2015-09-13 11:23:46.458 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0}] FLOAT 2015-09-13 11:23:48.523 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-09-13 11:23:48.535 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-09-13 11:23:49.532 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.55}] FLOAT 2015-09-13 11:23:49.542 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.55}] FLOAT 2015-09-13 11:23:50.142 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-09-13 11:23:50.149 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":1}] FLOAT 2015-09-13 11:23:51.148 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.83}] FLOAT 2015-09-13 11:23:51.155 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.83}] FLOAT 2015-09-13 11:23:51.399 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT 2015-09-13 11:23:51.406 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT 2015-09-13 11:23:52.407 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.93}] FLOAT 2015-09-13 11:23:52.421 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.93}] FLOAT 2015-09-13 11:23:52.658 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT 2015-09-13 11:23:52.665 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT 2015-09-13 11:23:53.663 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOAT 2015-09-13 11:23:53.675 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.97}] FLOATBei UP Dimmer identisches Verhalten.
Getestet mit jeweils aktuellem Internet Explorer/Firefox/Chrome auf Windows 8.1 mit aktuellem Patch Level. Sowie Safari unter aktuellem iOS.
Kurioserweise sind die ersten drei Logwerte immer identisch 1, 0,57, 1 und dann geht es in Richtung 0,8x und schwingt sich in Richtung 0,9x ein
Zweites beobachtetes Kuriosum: Wenn zwei Browserfenster geöffnet sind, dann läuft wieder alles Amok. Auch wenn ein Browser auf iOS und der andere auf Windows läuft.
-
Der Vollständigkeit halber sollte ich vielleicht noch erwähnen, dass es sich um einen Laptop mit Touchscreen handelt. Die Touch Funktionalität ist jedoch in der Registry abgeklemmt.
-
Nach weiterem probieren komme ich zu dem Schluss, dass das Problem grundsätzlich im ioBroker zu suchen ist. Es hat nichts mit den hqwidgets zu tun.
1. Beobachtung: Das Verhalten mit den jqui Widget dimmer ctrl ist absolut identisch
2. Beobachtung: Es wird total seltsam, wenn man ein lichtsteuerndes Programm auf der CCU aufruft
1. In Vis einen Button einfügen
2. Object ID auf das ProgramExecute setzen
3. "value" auf "true"
4. Den Button in der vis anklicken
5. Jetzt laufen alle Lampen, die über das Programm angesteuert werden Amok
Logfile zeigt folgendes (kurzer Ausschnitt)
2015-09-13 17:23:37.572 - error: hm-rpc.0 Error: You are sending too fast 2015-09-13 17:23:37.611 - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.08}] FLOAT 2015-09-13 17:23:38.188 - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.09}] FLOAT 2015-09-13 17:23:38.226 - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.09}] FLOAT 2015-09-13 17:23:38.463 - info: hm-rpc.0 setValue ["JEQ0200241:1","LEVEL",{"explicitDouble":0.12}] FLOAT 2015-09-13 17:23:38.471 - info: hm-rpc.0 setValue ["JEQ0200241:1","LEVEL",{"explicitDouble":0.12}] FLOAT 2015-09-13 17:23:38.474 - error: hm-rpc.0 binrpc -> setValue ["1","LEVEL",0.12] FLOAT 2015-09-13 17:23:38.475 - error: hm-rpc.0 Error: You are sending too fast 2015-09-13 17:23:39.196 - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.09}] FLOAT 2015-09-13 17:23:39.282 - info: hm-rpc.0 setValue ["JEQ0193658:1","LEVEL",{"explicitDouble":0.09}] FLOAT 2015-09-13 17:23:39.392 - info: hm-rpc.0 setValue ["JEQ0200292:1","LEVEL",{"explicitDouble":0.02}] FLOAT 2015-09-13 17:23:39.392 - info: hm-rpc.0 setValue ["JEQ0200292:1","LEVEL",{"explicitDouble":0.02}] FLOAT 2015-09-13 17:23:39.395 - error: hm-rpc.0 binrpc -> setValue ["1","LEVEL",0.02] FLOAT 2015-09-13 17:23:39.397 - error: hm-rpc.0 Error: You are sending too fast 2015-09-13 17:23:39.956 - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.03}] FLOAT 2015-09-13 17:23:39.971 - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.03}] FLOAT 2015-09-13 17:23:40.063 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.02}] FLOAT 2015-09-13 17:23:40.113 - info: hm-rpc.0 setValue ["IEQ0092302:1","LEVEL",{"explicitDouble":0.02}] FLOAT 2015-09-13 17:23:40.115 - error: hm-rpc.0 binrpc -> setValue ["1","LEVEL",0.02] FLOAT 2015-09-13 17:23:40.117 - error: hm-rpc.0 Error: You are sending too fast 2015-09-13 17:23:40.921 - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.3}] FLOAT 2015-09-13 17:23:40.926 - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.3}] FLOAT 2015-09-13 17:23:41.058 - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.1}] FLOAT 2015-09-13 17:23:41.061 - error: hm-rpc.0 binrpc -> setValue ["1","LEVEL",0.1] FLOAT 2015-09-13 17:23:41.062 - error: hm-rpc.0 Error: You are sending too fast 2015-09-13 17:23:41.065 - info: hm-rpc.0 setValue ["IEQ0544749:1","LEVEL",{"explicitDouble":0.1}] FLOATWas mich total irritiert. Das Programm läuft ja auf der CCU … aber trotzdem wird im Logfile "setValue" geloggt. Wenn ich das Programm auf der CCU ausführe, dann werden die Werte in vis korrekt dargestellt. Das Logfile bleibt aber komplett leer.
-
Ich weiß nicht wann genau, aber eben ist eine neue vis version gekommen.
Ich hatte eine neue Installation gemacht, unmittelbar danach war ein update da. jetzt 0.6.14.
Wie ich die Version von js-controller herausbekomme ist mir nicht ganz klar. `
steht im Reiter "hosts"Gruß
Rainer
-
Jo, die ist bei mir auch neu … Installation läuft
Derweil js-controller: 0.7.11
Update fertig ...
Update von vis auf 0.6.14 bringt allerdings keine Änderung im beschriebenen Verhalten
6341_1_falscher_wert_gesendet.png -
hqWidgets sind nicht in vis sondern in "vis-hqWidgets" und die sind gerade upgedated. Allerdings, weil ich das Verhalten nicht reproduzieren kann, es konnte nur durch Zufall kommen, dass Fehler gefixt ist.
Ich habe da was geändert.
-
Habe gerade Admin und hqwidgets aktualisiert … allerdings keine Veränderung des Verhaltens.
Ich habe bei mir 2 hm-rpc Instanzen .0 für rfd und .1 für wired ... da ja jeder Klick 2x gesendet wird habe ich die wired Instanz mal ausgeschaltet und danach auch den iobroker durchgestartet ... aber auch das hat das Verhalten nicht verändert.
Ich glaube immer noch, dass das Verhalten irgendwo anders verursacht wird und nicht in den hqwidgets begründet ist.
Bei mir ist das Verhalten absolut reproduzierbar. Es tritt sowohl auf meinem Windows Entwicklungssystem auf, als auch auf dem gestern frisch aufgesetzten RPI 2. Meine Vermutung geht in die Richtung, dass auf Grund zweier RPC Instanzen die Calls zweimal gemacht werden und das zu einem kuriosen Schaukeleffekt kommt.
Ich werde mal in Ruhe versuchen das lokal zu debuggen ... muss aber zugeben, dass ich vor 10 Jahren mal aktiver Java Entwickler war und das node.js Geraffel für mich noch "Neuland" ist
4986_bildschirmfoto_2018-04-12_um_21.17.36.png -
Frage ich anders: gibt es noch jemand (ausser mir), der hqWidgets/dimmer benutz und es läuft?
-
Ich habe eine Vermutung, woher so ein Verhalten kommen konnte.
Passiert das nur beim aktivierten hm-rpc?
