IOBroker mit ESPHome und MODBUS Wind Anemometer
-
Diesmal geht es um die Idee mit entsprechenden Sensoren alle möglichen Wetterdaten einzusammeln - unter anderem Windrichtung und Windgeschwindigkeiten.
Ich nutze einen PI 4 auf dem ich iOBroker nutze mit diversen Adaptern und möchte in meinem Szenario Wind Speed & direction via ESPHome und Modus abgreifen.
Eckdaten zu den Sensoren:
-
Wind speed transmitter (485type) SN-3000-FSJT-N01 https://robu.in/wp-content/uploads/2024/10/12-R183268-SN-3000-FSJT-N01-485-type.pdf
-
list itemWind Direction Transmitter (485type) SN-3000-FXJT-N01 https://robu.in/wp-content/uploads/2024/11/1-R183257-SN-3000-FXJT-N01.pdf
Das folgende Bild ist nur zur Info:
Also habe ich den ESPHome Adapter in iOBroker integriert, mir eine nodemmcu v3 gekauft, die Windsensoren und mein erstes YAML aufgesetzt. Es wird alles ohne Fehler kompiliert und der ESPHome arbeitet grundsätzlich. Da ich aber keine Kommunikation mit meinen Wind-Devices hinbekomme bin ich jetzt auf der Fehlersuche.
Das log des ESPHome zeigt folgendes und da irritieren mich die Warnungen - muss ich da was machen? Oder kann ich das ignorieren. Letztlich sehe ich an der flackernden LED des TTL-RS485, dass mein YAML arbeitet, etwas an den Konverter gesendet wird
Habe ich ein iOBroker unabhängiges Problem? Also ein Problem meiner ESPHome Umgebung? Im ESPHome-Forum habe ich kaum Feedback erhalten außer “*das Thema sollte auf Grund der Fehlermeldung eher in der iOBroker Welt besprochen werden”*italicised text
Hat jemand eine Idee?
-
-
@leonundjulie
Poste doch bitte mal die relevanten Teile des YAML -
@wolfgangfb Copy der YAML:
esphome:
name: weather
friendly_name: Weather
esp8266:
board: nodemcuv2
# Enable logging
logger:
# Enable Home Assistant API
api:
encryption:
key: "V8pXnULJ5OswQhdoEOT+by4DqN/1aoc5bwtUOOIVjv4="
ota:
- platform: esphome
password: "413a8bdefb6108e1f06649a7ad415c13"
wifi:
ssid: !secret wifi_ssid
password: !secret wifi_password
# Enable fallback hotspot (captive portal) in case wifi connection fails
ap:
ssid: "Weather Fallback Hotspot"
password: "zo88Vm8sO4Rv"
captive_portal:
web_server:
uart:
rx_pin: GPIO03
tx_pin: GPIO01
baud_rate: 4800
parity: NONE
stop_bits: 1
modbus:
id: modbus1
modbus_controller:
- id: wind_speed_meter
address: 0x1
modbus_id: modbus1
setup_priority: -10
command_throttle: 200ms
update_interval: 30s #or whatever you need
- id: wind_direction_meter
address: 0x2
modbus_id: modbus1
setup_priority: -10
command_throttle: 200ms
update_interval: 30s #or whatever you need
sensor:
- platform: modbus_controller
modbus_controller_id: wind_speed_meter
name: "Wind Speed"
device_class: wind_speed
id: wind_speed
register_type: holding
address: 0x0000
unit_of_measurement: "m/s"
value_type: U_WORD
accuracy_decimals: 1
filters:
- multiply: 0.1 - max:window_size: 5
send_every: 5
- exponential_moving_average:alpha: 0.1
send_every: 12
- platform: modbus_controller
modbus_controller_id: wind_direction_meter
name: "Wind direction gear"
internal: true
register_type: holding
address: 0x0000
value_type: U_WORD
accuracy_decimals: 0
on_value:
- lambda: |- switch (int(x)) { case 0: id(wind_direction_cardinal).publish_state("N"); //North break; case 1: id(wind_direction_cardinal).publish_state("NE"); //North-East break; case 2: id(wind_direction_cardinal).publish_state("E"); //East break; case 3: id(wind_direction_cardinal).publish_state("SE"); //South-East break; case 4: id(wind_direction_cardinal).publish_state("S"); //South break; case 5: id(wind_direction_cardinal).publish_state("SW"); //South-West break; case 6: id(wind_direction_cardinal).publish_state("W"); //West break; case 7: id(wind_direction_cardinal).publish_state("NW"); //North-West break; default: id(wind_direction_cardinal).publish_state(""); //invalid }- platform: modbus_controller
modbus_controller_id: wind_direction_meter
name: "Wind direction degree"
icon: mdi:compass-rose
register_type: read
address: 0x0001
value_type: U_WORD
accuracy_decimals: 0
state_class: measurement
unit_of_measurement: "°"
text_sensor:
- platform: template
name: "Wind direction cardinal"
id: wind_direction_cardinal
icon: mdi:compass-rose
-
@leonundjulie bitte in code-tags setzen, nicht als Zitat!
-
esphome: name: weather friendly_name: Weather esp8266: board: nodemcuv2 # Enable logging logger: # Enable Home Assistant API api: encryption: key: "V8pXnULJ5OswQhdoEOT+by4DqN/1aoc5bwtUOOIVjv4=" ota: - platform: esphome password: "413a8bdefb6108e1f06649a7ad415c13" wifi: ssid: !secret wifi_ssid password: !secret wifi_password # Enable fallback hotspot (captive portal) in case wifi connection fails ap: ssid: "Weather Fallback Hotspot" password: "zo88Vm8sO4Rv" captive_portal: web_server: uart: rx_pin: GPIO3 tx_pin: GPIO1 baud_rate: 4800 parity: NONE stop_bits: 1 data_bits: 8 modbus: id: modbus1 modbus_controller: - id: wind_speed_meter address: 0x01 modbus_id: modbus1 setup_priority: -10 command_throttle: 200ms update_interval: 30s #or whatever you need - id: wind_direction_meter address: 0x02 modbus_id: modbus1 setup_priority: -10 command_throttle: 200ms update_interval: 30s #or whatever you need sensor: - platform: modbus_controller modbus_controller_id: wind_speed_meter name: "Wind Speed" device_class: wind_speed id: wind_speed register_type: read address: 0x0000 unit_of_measurement: "m/s" value_type: U_WORD accuracy_decimals: 1 filters: - multiply: 0.1 - max: window_size: 5 send_every: 5 - exponential_moving_average: alpha: 0.1 send_every: 12 - platform: modbus_controller modbus_controller_id: wind_direction_meter name: "Wind direction gear" internal: true register_type: read address: 0x0000 value_type: U_WORD accuracy_decimals: 0 on_value: - lambda: |- switch (int(x)) { case 0: id(wind_direction_cardinal).publish_state("N"); //North break; case 1: id(wind_direction_cardinal).publish_state("NE"); //North-East break; case 2: id(wind_direction_cardinal).publish_state("E"); //East break; case 3: id(wind_direction_cardinal).publish_state("SE"); //South-East break; case 4: id(wind_direction_cardinal).publish_state("S"); //South break; case 5: id(wind_direction_cardinal).publish_state("SW"); //South-West break; case 6: id(wind_direction_cardinal).publish_state("W"); //West break; case 7: id(wind_direction_cardinal).publish_state("NW"); //North-West break; default: id(wind_direction_cardinal).publish_state(""); //invalid } - platform: modbus_controller modbus_controller_id: wind_direction_meter name: "Wind direction degree" icon: mdi:compass-rose register_type: read address: 0x0001 value_type: U_WORD accuracy_decimals: 0 state_class: measurement unit_of_measurement: "°" text_sensor: - platform: template name: "Wind direction cardinal" id: wind_direction_cardinal icon: mdi:compass-rose
