-
@Glasfaser
Anscheinend gibt es hierzu keine Lösung?
Da der OpenKNX-Adapter mit den gleichen Einstellungen läuft, kann ich den KNX-Adapter damit also nicht mehr betreiben.
Schade um das Geld für die Lizenz. -
@glasfaser Welche Einstellungen muss ich dazu bitte ändern im Container?
Also Container anhalten, und dann etwas ändern und neu starten?
Oder Container löschen und neu erstellen? -
Systemdata Bitte Ausfüllen Hardwaresystem: Synology DS723+ Arbeitsspeicher: 34GB Festplattenart: 4 TB HDD Betriebssystem: Buanet Docker v 9.0.1 Node-Version: Nodejs-Version: 18.19.0 NPM-Version: 10.2.3 Installationsart: Docker Image genutzt: Docker official image v 9.0.1 Ort/Name der Imagedatei: Buanet iobroker Nach Restore über das Backup-Tool läuft die KNX-Adapter-Instanz nicht mehr, udp bekommt keine Verbindung.
Bei gleichen Einstellungen bekommt der openKNX-Adapter jedoch eine Verbindung.
KNX-Lizenz ist gültig (grün), ETS-Datei konnte auch erfolgreich eingelesen werden, nur udp läuft im Gegensatz zum openKNX-Adapter nicht.knx.0 Zeit debug Nachricht knx.0 2024-01-20 06:35:27.266 info Send : description Request : 06 10 02 03 00 0e 08 01 ac 11 00 02 90 1d sent to 192.168.178.50:3671 knx.0 2024-01-20 06:35:27.266 info Connected - local UDP Server listening on 172.17.0.2:36893 knx.0 2024-01-20 06:35:27.265 info Event : UDP - listening knx.0 2024-01-20 06:35:27.265 info Using UDP with local IP: 172.17.0.2 knx.0 2024-01-20 06:35:26.266 info STATE_NOT_CONNECTED : Stop connection : STATE_NOT_CONNECTED(0) to STATE_NOT_CONNECTED(0). knx.0 2024-01-20 06:35:26.266 info ... not able to close connection, because already closed knx.0 2024-01-20 06:35:26.265 info Connection persists.....closing now knx.0 2024-01-20 06:35:26.265 info ...set STATE-NOT-CONNECTED knx.0 2024-01-20 06:35:25.264 info STATE_NOT_CONNECTED : Try to connect / reconnect : STATE_DISCONNECT_REQUEST(15) to STATE_NOT_CONNECTED(0). knx.0 2024-01-20 06:35:25.264 info ... not able to close connection, because already closed knx.0 2024-01-20 06:35:25.263 info Connection persists.....closing now knx.0 2024-01-20 06:35:25.263 info STATE_DISCONNECT_REQUEST : no defined handling for transition from State: STATE_CONNECTION_STATE_RESPONSE(6) to STATE_DISCONNECT_REQUEST(15). knx.0 2024-01-20 06:35:25.263 info Received CONNECTIONSTATE_RESPONSE : 06 10 02 08 00 08 00 21 192.168.178.50:3671 ChID : 0 SeqCntIN : 0 SeqCntOUT : 0 msgCode : [object Object] knx.0 2024-01-20 06:35:25.263 info STATE_CONNECTION_STATE_REQUEST : no defined handling for transition from State: STATE_DESCRIPTION_REQUEST(17) to STATE_CONNECTION_STATE_REQUEST(5). knx.0 2024-01-20 06:35:25.263 info Send : UDP Connection State Request : 06 10 02 07 00 10 00 00 08 01 00 00 00 00 92 b4 sent from Port: to 192.168.178.50:3671 knx.0 2024-01-20 06:35:23.262 info Send : description Request : 06 10 02 03 00 0e 08 01 ac 11 00 02 92 b4 sent to 192.168.178.50:3671 knx.0 2024-01-20 06:35:23.261 info Connected - local UDP Server listening on 172.17.0.2:37556 knx.0 2024-01-20 06:35:23.261 info Event : UDP - listening knx.0 2024-01-20 06:35:23.261 info Using UDP with local IP: 172.17.0.2 knx.0 2024-01-20 06:35:22.262 info STATE_NOT_CONNECTED : Stop connection : STATE_NOT_CONNECTED(0) to STATE_NOT_CONNECTED(0). knx.0 2024-01-20 06:35:22.262 info ... not able to close connection, because already closed knx.0 2024-01-20 06:35:22.261 info Connection persists.....closing now knx.0 2024-01-20 06:35:22.261 info ...set STATE-NOT-CONNECTED knx.0 2024-01-20 06:35:21.260 info STATE_NOT_CONNECTED : Try to connect / reconnect : STATE_DISCONNECT_REQUEST(15) to STATE_NOT_CONNECTED(0). knx.0 2024-01-20 06:35:21.260 info ... not able to close connection, because already closed knx.0 2024-01-20 06:35:21.259 info Connection persists.....closing now knx.0 -
@nubbbi sagte in KNX-Adapter - keine UDP-Verbindung - OpenKNX-Adapter i.O.:
Buanet Docker v 9.0.1
Würde ich dann auch noch gleichzeit auf die neue Image Version aktualisieren !
@glasfaser Das habe ich gemacht.
Müssen dann neben dem Mounting von /docker/iobroker zu /opt/fhem noch Ports zugewiesen werden?
Ich habe 3671-3671-udp und 7234-8081-tcp eingestellt, aber der Container bricht beim Start bei Schritt 3 ab. -
@glasfaser Das habe ich gemacht.
Müssen dann neben dem Mounting von /docker/iobroker zu /opt/fhem noch Ports zugewiesen werden?
Ich habe 3671-3671-udp und 7234-8081-tcp eingestellt, aber der Container bricht beim Start bei Schritt 3 ab.@nubbbi sagte in KNX-Adapter - keine UDP-Verbindung - OpenKNX-Adapter i.O.:
Ich habe 3671-3671-udp und 7234-8081-tcp eingestellt, aber der Container bricht beim Start bei Schritt 3 ab.
Warum soll er abbrechen !?
Bei Host brauchen keine Ports gemappt werden .
Zeige mal das LOG , so kann ich nur raten
-
@glasfaser Das habe ich gemacht.
Müssen dann neben dem Mounting von /docker/iobroker zu /opt/fhem noch Ports zugewiesen werden?
Ich habe 3671-3671-udp und 7234-8081-tcp eingestellt, aber der Container bricht beim Start bei Schritt 3 ab.@nubbbi sagte in KNX-Adapter - keine UDP-Verbindung - OpenKNX-Adapter i.O.:
Müssen dann neben dem Mounting von /docker/iobroker zu /opt/fhem
noch Ports zugewiesen werden?Das gleiche wie deine Einstellungen im alten Container , zu Ordner Mounts !
-
@glasfaser Das habe ich gemacht.
Müssen dann neben dem Mounting von /docker/iobroker zu /opt/fhem noch Ports zugewiesen werden?
Ich habe 3671-3671-udp und 7234-8081-tcp eingestellt, aber der Container bricht beim Start bei Schritt 3 ab. -
@nubbbi sagte in KNX-Adapter - keine UDP-Verbindung - OpenKNX-Adapter i.O.:
bricht beim Start bei Schritt 3 ab.
zusätzlich ... kann man hiermit mehr sehen :
Trage in der ENV ein
DEBUG = true.
 code_text ```iobroker date,stream,content 2024/01/28 19:33:12,stdout,This Script will exit now. 2024/01/28 19:33:12,stdout, 2024/01/28 19:31:23,stdout,[DEBUG] IoBroker is not running! 2024/01/28 19:31:23,stdout,[DEBUG] If you want to stop or restart your container you have to do it manually. 2024/01/28 19:31:23,stdout,[DEBUG] This enables you to investigate or fix your issue on the command line. 2024/01/28 19:31:23,stdout,[DEBUG] Debug mode prevents the container from exiting on errors. 2024/01/28 19:31:23,stdout, 2024/01/28 19:31:23,stdout,For more information see ioBroker Docker image docs (https://docs.buanet.de/iobroker-docker-image/docs). 2024/01/28 19:31:23,stdout,Please check your configuration and try again. 2024/01/28 19:31:23,stdout,[DEBUG] No connection to databases possible ... 2024/01/28 19:31:23,stdout,[DEBUG] Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! 2024/01/28 19:31:23,stdout,[DEBUG] Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! 2024/01/28 19:31:23,stdout,[DEBUG] Error message: 2024/01/28 19:31:23,stdout,Checking database connection... Failed. 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No custom states db settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking custom states db settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No custom objects db settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking custom objects db settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No multihost settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking multihost settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,(Re)setting permissions (This might take a while! Please be patient!)... Done. 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 3 of 5: Checking ioBroker Installation ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,Existing installation of ioBroker detected in "/opt/iobroker". 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 2 of 5: Detecting ioBroker Installation ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 1 of 5: Preparing Container ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2024/01/28 19:30:30,stdout,!!!! https://docs.buanet.de/iobroker-docker-image/docs/ !!!! 2024/01/28 19:30:30,stdout,!!!! For more information see ioBroker Docker image documentation: !!!! 2024/01/28 19:30:30,stdout,!!!! Please make sure to deactivate if no longer needed. !!!! 2024/01/28 19:30:30,stdout,!!!! This will extend the logging output and may slow down container start. !!!! 2024/01/28 19:30:30,stdout,!!!! Environment variable DEBUG is set to true. !!!! 2024/01/28 19:30:30,stdout,!!!! DEBUG LOG ACTIVE !!!! 2024/01/28 19:30:30,stdout,!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- -
 code_text ```iobroker date,stream,content 2024/01/28 19:33:12,stdout,This Script will exit now. 2024/01/28 19:33:12,stdout, 2024/01/28 19:31:23,stdout,[DEBUG] IoBroker is not running! 2024/01/28 19:31:23,stdout,[DEBUG] If you want to stop or restart your container you have to do it manually. 2024/01/28 19:31:23,stdout,[DEBUG] This enables you to investigate or fix your issue on the command line. 2024/01/28 19:31:23,stdout,[DEBUG] Debug mode prevents the container from exiting on errors. 2024/01/28 19:31:23,stdout, 2024/01/28 19:31:23,stdout,For more information see ioBroker Docker image docs (https://docs.buanet.de/iobroker-docker-image/docs). 2024/01/28 19:31:23,stdout,Please check your configuration and try again. 2024/01/28 19:31:23,stdout,[DEBUG] No connection to databases possible ... 2024/01/28 19:31:23,stdout,[DEBUG] Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! 2024/01/28 19:31:23,stdout,[DEBUG] Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! 2024/01/28 19:31:23,stdout,[DEBUG] Error message: 2024/01/28 19:31:23,stdout,Checking database connection... Failed. 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No custom states db settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking custom states db settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No custom objects db settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking custom objects db settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No multihost settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking multihost settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,(Re)setting permissions (This might take a while! Please be patient!)... Done. 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 3 of 5: Checking ioBroker Installation ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,Existing installation of ioBroker detected in "/opt/iobroker". 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 2 of 5: Detecting ioBroker Installation ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 1 of 5: Preparing Container ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2024/01/28 19:30:30,stdout,!!!! https://docs.buanet.de/iobroker-docker-image/docs/ !!!! 2024/01/28 19:30:30,stdout,!!!! For more information see ioBroker Docker image documentation: !!!! 2024/01/28 19:30:30,stdout,!!!! Please make sure to deactivate if no longer needed. !!!! 2024/01/28 19:30:30,stdout,!!!! This will extend the logging output and may slow down container start. !!!! 2024/01/28 19:30:30,stdout,!!!! Environment variable DEBUG is set to true. !!!! 2024/01/28 19:30:30,stdout,!!!! DEBUG LOG ACTIVE !!!! 2024/01/28 19:30:30,stdout,!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- -
 code_text ```iobroker date,stream,content 2024/01/28 19:33:12,stdout,This Script will exit now. 2024/01/28 19:33:12,stdout, 2024/01/28 19:31:23,stdout,[DEBUG] IoBroker is not running! 2024/01/28 19:31:23,stdout,[DEBUG] If you want to stop or restart your container you have to do it manually. 2024/01/28 19:31:23,stdout,[DEBUG] This enables you to investigate or fix your issue on the command line. 2024/01/28 19:31:23,stdout,[DEBUG] Debug mode prevents the container from exiting on errors. 2024/01/28 19:31:23,stdout, 2024/01/28 19:31:23,stdout,For more information see ioBroker Docker image docs (https://docs.buanet.de/iobroker-docker-image/docs). 2024/01/28 19:31:23,stdout,Please check your configuration and try again. 2024/01/28 19:31:23,stdout,[DEBUG] No connection to databases possible ... 2024/01/28 19:31:23,stdout,[DEBUG] Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! 2024/01/28 19:31:23,stdout,[DEBUG] Could not connect to states database at 127.0.0.1:9000 (invalid protocol). Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! 2024/01/28 19:31:23,stdout,[DEBUG] Error message: 2024/01/28 19:31:23,stdout,Checking database connection... Failed. 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No custom states db settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking custom states db settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No custom objects db settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking custom objects db settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,[DEBUG] Done. 2024/01/28 19:30:30,stdout,[DEBUG] No multihost settings detected. 2024/01/28 19:30:30,stdout,[DEBUG] Checking multihost settings... 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,(Re)setting permissions (This might take a while! Please be patient!)... Done. 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 3 of 5: Checking ioBroker Installation ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,Existing installation of ioBroker detected in "/opt/iobroker". 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 2 of 5: Detecting ioBroker Installation ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout,----- Step 1 of 5: Preparing Container ----- 2024/01/28 19:30:30,stdout,-------------------------------------------------------------------------------- 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2024/01/28 19:30:30,stdout,!!!! https://docs.buanet.de/iobroker-docker-image/docs/ !!!! 2024/01/28 19:30:30,stdout,!!!! For more information see ioBroker Docker image documentation: !!!! 2024/01/28 19:30:30,stdout,!!!! Please make sure to deactivate if no longer needed. !!!! 2024/01/28 19:30:30,stdout,!!!! This will extend the logging output and may slow down container start. !!!! 2024/01/28 19:30:30,stdout,!!!! Environment variable DEBUG is set to true. !!!! 2024/01/28 19:30:30,stdout,!!!! DEBUG LOG ACTIVE !!!! 2024/01/28 19:30:30,stdout,!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 2024/01/28 19:30:30,stdout, 2024/01/28 19:30:30,stdout,--------------------------------------------------------------------------------@nubbbi sagte in KNX-Adapter - keine UDP-Verbindung - OpenKNX-Adapter i.O.:
Please make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software!
Zeige mal vom vorhanden Container , die Full Ausgabe von
iob diag -
@nubbbi
Kann es sein, dass der Port 9000, der hier erwartet wird, bereits anders genutzt wird? Nämlich bei mir von Portainer? -
@nubbbi sagte in KNX-Adapter - keine UDP-Verbindung - OpenKNX-Adapter i.O.:
Nämlich bei mir von Portainer?
Richtig , den mußt du ändern !!!
-
@glasfaser Wenn ich den Port 9000 für den Container Portainer ändere, komme ich aber nicht mehr auf dessen Weboberfläche.
-
sieht dann so aus , also über den Port 8020 erreichbar :
Portainer ist im Bridge Modus :
.
.
*** ioBroker-Installation *** ioBroker Status Could not connect to objects database at 127.0.0.1:9001 (invalid protocol). Plea se make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! Could not connect to objects database at 127.0.0.1:9001 (invalid protocol). Plea se make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! No connection to databases possible ... Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: "javascript" not found Adapters from github: 0 Adapter State Could not connect to objects database at 127.0.0.1:9001 (invalid protocol). Plea se make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! Could not connect to objects database at 127.0.0.1:9001 (invalid protocol). Plea se make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! -
*** ioBroker-Installation *** ioBroker Status Could not connect to objects database at 127.0.0.1:9001 (invalid protocol). Plea se make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! Could not connect to objects database at 127.0.0.1:9001 (invalid protocol). Plea se make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! No connection to databases possible ... Core adapters versions js-controller: 5.0.17 admin: 6.12.0 javascript: "javascript" not found Adapters from github: 0 Adapter State Could not connect to objects database at 127.0.0.1:9001 (invalid protocol). Plea se make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! Could not connect to objects database at 127.0.0.1:9001 (invalid protocol). Plea se make sure the configured IP and port points to a host running JS-Controller >= 2.0. and that the port is not occupied by other software! -
@glasfaser Also, ich öffne die Einstellungen zum Container, gehe auf "Terminalfenster öffnen" und dann "Mit Befehl starten" und da gebe ich "iob diag" ein - soweit richtig?
Mir gelingt es aber nicht, das Ergebnis per STRG-C zu kopieren.
-
@nubbbi sagte in KNX-Adapter - keine UDP-Verbindung - OpenKNX-Adapter i.O.:
Mir gelingt es aber nicht, das Ergebnis per STRG-C zu kopieren.
Steht in der Beschreibung !!
vorher STRG-A dann STRG-C
-
@glasfaser vorher heißt, wenn da steht "drücke eine Taste, um Summary zu erstellen"?
Support us
677
Online32.7k
Users82.5k
Topics1.3m
Posts