Update ioBroker klappt nicht - gelöst durch neuinstallation

Thomas Braun

Zeig mal das ganze.

DLaurenz

gern

pi@io-fhem:~ $ iob fix
library: loaded
Library version=2023-10-10

==========================================================================

    Welcome to the ioBroker installation fixer!
    Script version: 2023-04-02

    You might need to enter your password a couple of times.

==========================================================================


==========================================================================
    Installing prerequisites (1/5)
==========================================================================

OK:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
OK:2 http://archive.raspberrypi.org/debian buster InRelease
OK:3 https://repo.saltproject.io/py3/debian/10/amd64/latest buster InRelease
OK:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Ign:5 https://download.webmin.com/download/repository sarge InRelease
OK:6 https://download.webmin.com/download/repository sarge Release
Paketlisten werden gelesen... Fertig
E: Paket gcc-c+ kann nicht gefunden werden.
E: Mittels regulärem Ausdruck »gcc-c+« konnte kein Paket gefunden werden.
Installed gcc-c++

==========================================================================
    Checking ioBroker user and directory permissions (2/5)
==========================================================================

Created /etc/sudoers.d/iobroker
Fixing directory permissions...

==========================================================================
    Check and cleanup npm temporary directories (3/5)
==========================================================================

Done.

==========================================================================
    Database maintenance (4/5)
==========================================================================

Checking for uncompressed JSONL databases... This might take a while!

No relevant JSONL files found to compress, skip

==========================================================================
    Checking autostart (5/5)
==========================================================================

Enabling autostart...
Autostart enabled!

==========================================================================

    Your installation was fixed successfully
    Run iobroker start to start ioBroker again!

==========================================================================

und danach iob diag:

pi@io-fhem:~ $ iob diag
*** iob diag is starting up, please wait ***
The state system.host.io-fhem.versions.nodeNewestNext was not found!
The state system.host.io-fhem.versions.npmNewestNext was not found!
The state system.host.io-fhem.versions.nodeCurrent was not found!

*** ioBroker Diagnosis ***

Please stretch the window of your terminal programm (puTTY) as wide as possible or switch to full screen

The following checks may give hints to potential malconfigurations or errors, please post them in our forum:

https://forum.iobroker.net

Just copy and paste the Summary Page, including the ``` characters at start and end.
It helps us to help you!

Press any key to continue

======== Start marking the full check here =========

Skript v.2023-10-10

*** BASE SYSTEM ***
   Static hostname: io-fhem
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7+
      Architecture: arm

Model           : Raspberry Pi 3 Model B Rev 1.2
Docker          : false
Virtualization  : none
Kernel          : armv7l
Userland        : armhf

Systemuptime and Load:
 05:49:13 up 11:03,  1 user,  load average: 0.74, 0.52, 0.35
CPU threads: 4


*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** Time and Time Zones ***
               Local time: Thu 2023-10-12 05:49:13 CEST
           Universal time: Thu 2023-10-12 03:49:13 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: inactive
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:
Boot Target:    multi-user.target

*** MEMORY ***
              total        used        free      shared  buff/cache   available
Mem:           972M        142M        222M        3.0M        607M        762M
Swap:           99M         57M         42M
Total:         1.1G        200M        265M

          972 M total memory
          142 M used memory
          458 M active memory
          168 M inactive memory
          222 M free memory
          130 M buffer memory
          476 M swap cache
           99 M total swap
           57 M used swap
           42 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FAILED SERVICES ***

  UNIT             LOAD   ACTIVE SUB    DESCRIPTION
* iobroker.service loaded failed failed ioBroker Server

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

1 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.

*** FILESYSTEM ***
Filesystem                         Type      Size  Used Avail Use% Mounted on
/dev/root                          ext4       30G  7.6G   20G  28% /
devtmpfs                           devtmpfs  454M     0  454M   0% /dev
tmpfs                              tmpfs     487M  8.0K  487M   1% /dev/shm
tmpfs                              tmpfs     487M   13M  474M   3% /run
tmpfs                              tmpfs     5.0M  4.0K  5.0M   1% /run/lock
tmpfs                              tmpfs     487M     0  487M   0% /sys/fs/cgroup
/dev/mmcblk0p1                     vfat       43M   25M   18M  59% /boot
tmpfs                              tmpfs      98M     0   98M   0% /run/user/0
fs01.samba.laurenz.ws:/BACKUPS     nfs        11T  7.2T  3.4T  69% /autofs/backup
fs04.samba.laurenz.ws:/SOFTWARE    nfs       8.2T  5.9T  2.3T  73% /autofs/software
fs04.samba.laurenz.ws:/MAILFUJITSU nfs       8.2T  5.9T  2.3T  73% /autofs/mailfujitsu
fs01.samba.laurenz.ws:/NFS         nfs        11T  7.2T  3.4T  69% /autofs/nfs

Messages concerning ext4 filesystem in dmesg:
[Wed Oct 11 18:45:40 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000  dwc_otg.lpm_enable=0 console=ttyS0,115200 console=tty1 root=PARTUUID=1bf224e2-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[Wed Oct 11 18:45:43 2023] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[Wed Oct 11 18:45:43 2023] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[Wed Oct 11 18:45:45 2023] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[Wed Oct 11 23:32:51 2023] [<802b0ee8>] (filemap_fault) from [<8042d260>] (ext4_filemap_fault+0x38/0x4c)
[Wed Oct 11 23:32:51 2023] [<8042d228>] (ext4_filemap_fault) from [<802e8900>] (__do_fault+0x48/0x14c)

Show mounted filesystems \(real ones only\):
TARGET                SOURCE                             FSTYPE OPTIONS
/                     /dev/mmcblk0p2                     ext4   rw,noatime
|-/sys/fs/bpf         none                               bpf    rw,nosuid,nodev,noexec,relatime,mode=700
|-/boot               /dev/mmcblk0p1                     vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro
|-/autofs/software    fs04.samba.laurenz.ws:/SOFTWARE    nfs    rw,relatime,sync,vers=3,rsize=32768,wsize=32768,namlen=255,hard,proto=tcp,timeo=14,retrans=2,sec=sys,mountaddr=192.168.2.74,mountvers=3,mountport=30000,mountproto=udp,local_lock=none,addr=192.168.2.74
|-/autofs/mailfujitsu fs04.samba.laurenz.ws:/MAILFUJITSU nfs    rw,relatime,sync,vers=3,rsize=32768,wsize=32768,namlen=255,hard,proto=tcp,timeo=14,retrans=2,sec=sys,mountaddr=192.168.2.74,mountvers=3,mountport=30000,mountproto=udp,local_lock=none,addr=192.168.2.74
|-/autofs/backup      fs01.samba.laurenz.ws:/BACKUPS     nfs    rw,relatime,sync,vers=3,rsize=32768,wsize=32768,namlen=255,hard,proto=tcp,timeo=14,retrans=2,sec=sys,mountaddr=192.168.2.72,mountvers=3,mountport=30000,mountproto=udp,local_lock=none,addr=192.168.2.72
`-/autofs/nfs         fs01.samba.laurenz.ws:/NFS         nfs    rw,relatime,sync,vers=3,rsize=32768,wsize=32768,namlen=255,hard,proto=tcp,timeo=14,retrans=2,sec=sys,mountaddr=192.168.2.72,mountvers=3,mountport=30000,mountproto=udp,local_lock=none,addr=192.168.2.72

Files in neuralgic directories:

/var:
1.7G    /var/
881M    /var/cache
705M    /var/cache/apt
645M    /var/cache/apt/archives
583M    /var/mail

Archived and active journals take up 12.1M in the file system.

/opt/iobroker/backups:
4.0K    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
5.2M    /opt/iobroker/iobroker-data/
776K    /opt/iobroker/iobroker-data/backup-objects
532K    /opt/iobroker/iobroker-data/files
440K    /opt/iobroker/iobroker-data/files/discovery.admin
88K     /opt/iobroker/iobroker-data/files/admin.admin

The five largest files in iobroker-data are:
1.5M    /opt/iobroker/iobroker-data/objects.jsonl
1.5M    /opt/iobroker/iobroker-data/objects.json.migrated
964K    /opt/iobroker/iobroker-data/objects.json.bak.migrated
448K    /opt/iobroker/iobroker-data/backup-objects/2020-08-24_00-13_objects.json.gz
288K    /opt/iobroker/iobroker-data/backup-objects/2019-05-10_23-20_objects.json.gz

USB-Devices by-id:
USB-Sticks -  Avoid direct links to /dev/* in your adapter setups, please always prefer the links 'by-id':

/dev/serial/by-id/usb-FTDI_FT230X_Basic_UART_DJ00TW49-if00-port0
/dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0014B93EF0-if00

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.18.1
/usr/bin/node           v18.18.1
/usr/bin/npm            10.2.0
/usr/bin/npx            10.2.0
/usr/bin/corepack       0.21.0


nodejs:
  Installed: 18.18.1-1nodesource1
  Candidate: 18.18.1-1nodesource1
  Version table:
 *** 18.18.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
        100 /var/lib/dpkg/status
     18.18.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.17.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.16.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.15.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.2-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.14.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.13.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.12.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.11.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.10.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.1-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.9.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.8.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.7.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.6.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.5.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.4.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.3.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.2.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.1.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     18.0.0-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x nodistro/main armhf Packages
     10.24.0~dfsg-1~deb10u3 500
        500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages

Temp directories causing npm8 problem: 0
No problems detected

Errors in npm tree:
npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.js-controller@5.0.13 /opt/iobroker/node_modules/iobroker.js-controller
npm ERR! invalid: osx-temperature-sensor@ /opt/iobroker/node_modules/osx-temperature-sensor
npm ERR! invalid: fsevents@ /opt/iobroker/node_modules/fsevents

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-10-12T03_49_27_265Z-debug-0.log

*** ioBroker-Installation ***

ioBroker Status
iobroker is not running on this host.

At least one iobroker host is running.

Objects type: jsonl
States  type: jsonl

Core adapters versions
js-controller:  5.0.13
admin:          6.2.23
javascript:     "javascript" not found

npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.js-controller@5.0.13 /opt/iobroker/node_modules/iobroker.js-controller

npm ERR! A complete log of this run can be found in: /home/pi/.npm/_logs/2023-10-12T03_49_54_984Z-debug-0.log
Adapters from github:   0

Adapter State
+ system.adapter.admin.0                  : admin                 : io-master                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.admin.1                  : admin                 : io-vis                                   - disabled, port: 8081, bind: 127.0.0.1, run as: admin
  system.adapter.admin.2                  : admin                 : io-blegw02                               - disabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.admin.3                  : admin                 : io-influxdb                              - disabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : io-master                                -  enabled
  system.adapter.backitup.1               : backitup              : io-fhem                                  - disabled
+ system.adapter.ble.0                    : ble                   : io-blegw02                               -  enabled
  system.adapter.daswetter.0              : daswetter             : io-vis                                   -  enabled
+ system.adapter.discovery.0              : discovery             : io-master                                -  enabled
  system.adapter.dwd.0                    : dwd                   : io-vis                                   -  enabled
  system.adapter.fhem.0                   : fhem                  : io-fhem                                  -  enabled, port: 7072
  system.adapter.flot.0                   : flot                  : io-vis                                   -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : io-master                                -  enabled
+ system.adapter.hmip.0                   : hmip                  : io-master                                -  enabled
  system.adapter.homeconnect.0            : homeconnect           : io-master                                - disabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: io-vis                                   -  enabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : io-vis                                   -  enabled
  system.adapter.icons-icons8.0           : icons-icons8          : io-vis                                   -  enabled
  system.adapter.icons-material-png.0     : icons-material-png    : io-vis                                   -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : io-vis                                   -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : io-vis                                   -  enabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: io-vis                                   -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : io-vis                                   -  enabled
+ system.adapter.influxdb.0               : influxdb              : io-influxdb                              -  enabled, port: 8086
+ system.adapter.info.0                   : info                  : io-master                                -  enabled
+ system.adapter.meross.0                 : meross                : io-master                                -  enabled
  system.adapter.smartgarden.0            : smartgarden           : io-master                                - disabled
  system.adapter.vis-bars.0               : vis-bars              : io-vis                                   -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : io-vis                                   -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : io-vis                                   -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : io-vis                                   -  enabled
  system.adapter.vis-history.0            : vis-history           : io-vis                                   -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : io-vis                                   -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : io-vis                                   -  enabled
  system.adapter.vis-lcars.0              : vis-lcars             : io-vis                                   -  enabled
  system.adapter.vis-material.0           : vis-material          : io-vis                                   -  enabled
  system.adapter.vis-metro.0              : vis-metro             : io-vis                                   -  enabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : io-vis                                   -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : io-vis                                   -  enabled
  system.adapter.vis-weather.0            : vis-weather           : io-vis                                   -  enabled
  system.adapter.vis.0                    : vis                   : io-vis                                   -  enabled
+ system.adapter.web.0                    : web                   : io-vis                                   -  enabled, port: 8082, bind: 192.168.2.112, run as: admin
  system.adapter.zigbee.0                 : zigbee                : io-fhem                                  - disabled, port: /dev/ttyACM0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : io-master                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.fhem.0                   : fhem                  : io-fhem                                  -  enabled, port: 7072
+ system.adapter.influxdb.0               : influxdb              : io-influxdb                              -  enabled, port: 8086
+ system.adapter.web.0                    : web                   : io-vis                                   -  enabled, port: 8082, bind: 192.168.2.112, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): beta

Installed ioBroker-Instances
Used repository: beta
Adapter    "admin"        : 6.10.7   , installed 6.2.23 [Updatable]
Adapter    "backitup"     : 2.8.4    , installed 2.5.6  [Updatable]
Adapter    "ble"          : 0.13.4   , installed 0.13.4
Adapter    "discovery"    : 4.2.0    , installed 3.2.0  [Updatable]
Adapter    "fhem"         : 2.0.5    , installed 2.0.3  [Updatable]
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "fritzdect"    : 2.4.1    , installed 2.3.1  [Updatable]
Adapter    "homeconnect"  : 1.1.1    , installed 1.0.1  [Updatable]
Adapter    "info"         : 2.0.0    , installed 1.9.26 [Updatable]
Controller "js-controller": 5.0.13   , installed 5.0.13
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 6.5.8    , installed 6.5.2  [Updatable]
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "web"          : 6.1.5    , installed 5.5.3  [Updatable]
Adapter    "ws"           : 2.5.8    , installed 2.5.3  [Updatable]
Adapter    "zigbee"       : 1.8.24   , installed 1.8.10 [Updatable]

Objects and States
Please stand by - This may take a while
Objects:        4796
States:         4194

*** OS-Repositories and Updates ***
Hit:1 http://archive.raspberrypi.org/debian buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 https://repo.saltproject.io/py3/debian/10/amd64/latest buster InRelease
Hit:4 https://deb.nodesource.com/node_18.x nodistro InRelease
Ign:5 https://download.webmin.com/download/repository sarge InRelease
Hit:6 https://download.webmin.com/download/repository sarge Release
Reading package lists...
Pending Updates: 2

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          23649      1/init
tcp        0      0 0.0.0.0:10000           0.0.0.0:*               LISTEN      0          515393     4086/perl
tcp        0      0 0.0.0.0:8083            0.0.0.0:*               LISTEN      999        520728     4302/perl
tcp        0      0 0.0.0.0:48531           0.0.0.0:*               LISTEN      106        514537     4093/rpc.statd
tcp        0      0 0.0.0.0:43957           0.0.0.0:*               LISTEN      0          165832     -
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          17133      679/sshd
tcp        0      0 0.0.0.0:7072            0.0.0.0:*               LISTEN      999        518479     4302/perl
tcp6       0      0 :::42983                :::*                    LISTEN      0          165834     -
tcp6       0      0 :::111                  :::*                    LISTEN      0          23655      1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          17135      679/sshd
tcp6       0      0 :::6556                 :::*                    LISTEN      998        657078     5951/cmk-agent-ctl
tcp6       0      0 :::47389                :::*                    LISTEN      106        514541     4093/rpc.statd
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15128      512/dhcpcd
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          23651      1/init
udp        0      0 192.168.2.113:123       0.0.0.0:*                           109        20456      583/ntpd
udp        0      0 127.0.0.1:123           0.0.0.0:*                           0          16992      583/ntpd
udp        0      0 0.0.0.0:123             0.0.0.0:*                           0          16988      583/ntpd
udp        0      0 0.0.0.0:56477           0.0.0.0:*                           108        12093      362/avahi-daemon: r
udp        0      0 0.0.0.0:51910           0.0.0.0:*                           0          165831     -
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        12091      362/avahi-daemon: r
udp        0      0 0.0.0.0:10000           0.0.0.0:*                           0          515394     4086/perl
udp        0      0 127.0.0.1:877           0.0.0.0:*                           0          514531     4093/rpc.statd
udp        0      0 0.0.0.0:56857           0.0.0.0:*                           106        514535     4093/rpc.statd
udp6       0      0 :::35385                :::*                                108        12094      362/avahi-daemon: r
udp6       0      0 :::111                  :::*                                0          21979      1/init
udp6       0      0 :::53872                :::*                                106        514539     4093/rpc.statd
udp6       0      0 :::123                  :::*                                0          16985      583/ntpd
udp6       0      0 :::5353                 :::*                                108        12092      362/avahi-daemon: r
udp6       0      0 :::53242                :::*                                0          165833     -

*** Log File - Last 25 Lines ***

2023-10-12 04:42:14.144  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 04:47:14.127  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 04:52:14.129  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 04:57:14.131  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:02:14.132  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:07:14.134  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:12:14.137  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:17:14.136  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:22:14.140  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:27:14.141  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:32:14.143  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:37:14.146  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:42:14.147  - info: fhem.0 (5908) stateChange (out): fhem.0.info.Commands.sendFHEM | set fhem.0.alive on-for-timer 360 > set fhem.0.alive on-for-timer 360
2023-10-12 05:44:01.807  - info: host.io-fhem received SIGTERM
2023-10-12 05:44:01.820  - info: host.io-fhem stopInstance system.adapter.fhem.0 (force=false, process=true)
2023-10-12 05:44:01.824  - info: host.io-fhem stopInstance system.adapter.zigbee.0 (force=false, process=false)
2023-10-12 05:44:01.825  - info: host.io-fhem stopInstance system.adapter.backitup.1 (force=false, process=false)
2023-10-12 05:44:01.830  - info: fhem.0 (5908) terminating
2023-10-12 05:44:01.834  - info: host.io-fhem stopInstance system.adapter.fhem.0 send kill signal
2023-10-12 05:44:01.833  - info: fhem.0 (5908) Terminated (NO_ERROR): Without reason
2023-10-12 05:44:01.837  - info: fhem.0 (5908) Got terminate signal TERMINATE_YOURSELF
2023-10-12 05:44:02.327  - info: fhem.0 (5908) terminating
2023-10-12 05:44:02.638  - info: host.io-fhem instance system.adapter.fhem.0 terminated with code 0 (NO_ERROR)
2023-10-12 05:44:02.640  - info: host.io-fhem All instances are stopped.
2023-10-12 05:44:02.664  - info: host.io-fhem terminated


============ Mark until here for C&P =============

======================= SUMMARY =======================
                        v.2023-10-10


   Static hostname: io-fhem
         Icon name: computer
  Operating System: Raspbian GNU/Linux 10 (buster)
            Kernel: Linux 5.10.103-v7+
      Architecture: arm

Installation:           native
Kernel:                 armv7l
Userland:               armhf
Timezone:               Europe/Berlin (CEST, +0200)
User-ID:                1000
X-Server:               false
Boot Target:            multi-user.target

Pending OS-Updates:     2
Pending iob updates:    11

Nodejs-Installation:    /usr/bin/nodejs         v18.18.1
                        /usr/bin/node           v18.18.1
                        /usr/bin/npm            10.2.0
                        /usr/bin/npx            10.2.0
                        /usr/bin/corepack       0.21.0

Recommended versions are nodejs  and npm
Your nodejs installation is correct

MEMORY:
              total        used        free      shared  buff/cache   available
Mem:           972M        142M        214M        3.0M        616M        763M
Swap:           99M         57M         42M
Total:         1.1G        199M        256M

Active iob-Instances:   11
Active repo(s): beta

ioBroker Core:          js-controller           5.0.13
                        admin                   6.2.23

ioBroker Status:        iobroker is not running on this host.

At least one iobroker host is running.

Objects type: jsonl
States  type: jsonl

Status admin and web instance:
+ system.adapter.admin.0                  : admin                 : io-master                                -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.admin.1                  : admin                 : io-vis                                   - disabled, port: 8081, bind: 127.0.0.1, run as: admin
  system.adapter.admin.2                  : admin                 : io-blegw02                               - disabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.admin.3                  : admin                 : io-influxdb                              - disabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.web.0                    : web                   : io-vis                                   -  enabled, port: 8082, bind: 192.168.2.112, run as: admin

Objects:                4796
States:                 4194

Size of iob-Database:

1.5M    /opt/iobroker/iobroker-data/objects.jsonl
1.5M    /opt/iobroker/iobroker-data/objects.json.migrated
964K    /opt/iobroker/iobroker-data/objects.json.bak.migrated
8.0K    /opt/iobroker/iobroker-data/states.jsonl
8.0K    /opt/iobroker/iobroker-data/states.json.migrated
8.0K    /opt/iobroker/iobroker-data/states.json.bak.migrated



=================== END OF SUMMARY ====================

DLaurenz

@dlaurenz

ich hatte dann noch mal ein upgrade self gemacht... nun stehe ich hier (iob diag habe ich danach nochmal gemacht)
irgendwie ist da noch irgendwas in den files verdreht

root@io-fhem:/opt/iobroker# npm ls
npm ERR! code ELSPROBLEMS
npm ERR! invalid: iobroker.js-controller@5.0.13 /opt/iobroker/node_modules/iobroker.js-controller
iobroker.inst@2.0.3 /opt/iobroker
├── colors@1.4.0
├── fs-extra@7.0.1
├── iobroker.admin@6.2.23
├── iobroker.backitup@2.5.6
├── iobroker.ble@0.13.4
├── iobroker.discovery@3.2.0
├── iobroker.fhem@2.0.3
├── iobroker.flot@1.12.0
├── iobroker.fritzdect@2.3.1
├── iobroker.homeconnect@1.0.1
├── iobroker.info@1.9.26
├── iobroker.js-controller@5.0.13 invalid: "4.0.24" from the root project
├── iobroker.simple-api@2.7.2
├── iobroker.socketio@6.5.2
├── iobroker.vis@1.4.16
├── iobroker.web@5.5.3
├── iobroker.ws@2.5.3
├── iobroker.zigbee@1.8.10
├── iobroker@2.0.3
├── semver@5.7.2
├── serialport@7.1.5
└── yargs@7.1.2


npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-10-12T04_02_07_902Z-debug-0.log

DLaurenz

@dlaurenz

root@io-fhem:~# find "/opt/iobroker/node_modules" -type d -iname ".*-????????" ! -iname ".local-chromium" -exec rm -rf "{}" \; &> /dev/null

root@io-fhem:~#
root@io-fhem:~# cd /opt/iobroker/
root@io-fhem:/opt/iobroker# npm list
iobroker.inst@2.0.3 /opt/iobroker
├── colors@1.4.0
├── fs-extra@7.0.1
├── iobroker.admin@6.2.23
├── iobroker.backitup@2.5.6
├── iobroker.ble@0.13.4
├── iobroker.discovery@3.2.0
├── iobroker.fhem@2.0.3
├── iobroker.flot@1.12.0
├── iobroker.fritzdect@2.3.1
├── iobroker.homeconnect@1.0.1
├── iobroker.info@1.9.26
├── iobroker.js-controller@4.0.24
├── iobroker.simple-api@2.7.2
├── iobroker.socketio@6.5.2
├── iobroker.vis@1.4.16
├── iobroker.web@5.5.3
├── iobroker.ws@2.5.3
├── iobroker.zigbee@1.8.10
├── iobroker@2.0.3
├── semver@5.7.2
├── serialport@7.1.5
└── yargs@7.1.2

root@io-fhem:/opt/iobroker# iob upgrade fritzdect --debug

This upgrade of "fritzdect" will introduce the following changes:
==========================================================================
-> 2.4.1:
correctionts reported by adapter-checker

-> 2.4.0:
new function for routines, correction for templates
==========================================================================

Would you like to upgrade fritzdect from @2.3.1 to @2.4.1 now? [(y)es, (n)o]: y
Update fritzdect from @2.3.1 to @2.4.1
NPM version: 10.2.0
Installing iobroker.fritzdect@2.4.1... (System call)
npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies.
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm WARN cleanup Failed to remove some directories [
npm WARN cleanup   [
npm WARN cleanup     '/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket',
npm WARN cleanup     [Error: ENOTEMPTY: directory not empty, rmdir '/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/build/Release'] {
npm WARN cleanup       errno: -39,
npm WARN cleanup       code: 'ENOTEMPTY',
npm WARN cleanup       syscall: 'rmdir',
npm WARN cleanup       path: '/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/build/Release'
npm WARN cleanup     }
npm WARN cleanup   ],
npm WARN cleanup   [
npm WARN cleanup     '/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket',
npm WARN cleanup     [Error: ENOTEMPTY: directory not empty, rmdir '/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/build/Release'] {
npm WARN cleanup       errno: -39,
npm WARN cleanup       code: 'ENOTEMPTY',
npm WARN cleanup       syscall: 'rmdir',
npm WARN cleanup       path: '/opt/iobroker/node_modules/@abandonware/bluetooth-hci-socket/build/Release'
npm WARN cleanup     }
npm WARN cleanup   ]
npm WARN cleanup ]
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/@serialport/bindings
npm ERR! command failed
npm ERR! command sh -c prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird betreten
npm ERR!   CXX(target) Release/obj.target/bindings/src/serialport.o
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/@serialport/bindings/build“ wird verlassen
npm ERR! gyp info it worked if it ends with ok
npm ERR! gyp info using node-gyp@9.4.0
npm ERR! gyp info using node@18.18.1 | linux | arm
npm ERR! gyp info find Python using Python version 3.7.3 found at "/usr/bin/python3"
npm ERR! gyp info spawn /usr/bin/python3
npm ERR! gyp info spawn args [
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
npm ERR! gyp info spawn args   'binding.gyp',
npm ERR! gyp info spawn args   '-f',
npm ERR! gyp info spawn args   'make',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/opt/iobroker/node_modules/@serialport/bindings/build/config.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/home/iobroker/.cache/node-gyp/18.18.1/include/node/common.gypi',
npm ERR! gyp info spawn args   '-Dlibrary=shared_library',
npm ERR! gyp info spawn args   '-Dvisibility=default',
npm ERR! gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/18.18.1',
npm ERR! gyp info spawn args   '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
npm ERR! gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/18.18.1/<(target_arch)/node.lib',
npm ERR! gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/@serialport/bindings',
npm ERR! gyp info spawn args   '-Dnode_engine=v8',
npm ERR! gyp info spawn args   '--depth=.',
npm ERR! gyp info spawn args   '--no-parallel',
npm ERR! gyp info spawn args   '--generator-output',
npm ERR! gyp info spawn args   'build',
npm ERR! gyp info spawn args   '-Goutput_dir=.'
npm ERR! gyp info spawn args ]
npm ERR! gyp info spawn make
npm ERR! gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’:
npm ERR! ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
npm ERR!    uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen);
npm ERR!                                                                      ^~~~~~~~~~~~~
npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’:
npm ERR! ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
npm ERR!    uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate);
npm ERR!                                                                        ^~~~~~~~~~~~~~~
npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’:
npm ERR! ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
npm ERR!    uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose);
npm ERR!                                                                       ^~~~~~~~~~~~~~
npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’:
npm ERR! ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
npm ERR!    uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush);
npm ERR!                                                                       ^~~~~~~~~~~~~~
npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’:
npm ERR! ../src/serialport.cpp:270:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
npm ERR!    uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet);
npm ERR!                                                                     ^~~~~~~~~~~~
npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’:
npm ERR! ../src/serialport.cpp:314:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
npm ERR!    uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet);
npm ERR!                                                                     ^~~~~~~~~~~~
npm ERR! ../src/serialport.cpp: In function ‘void EIO_AfterGet(uv_work_t*)’:
npm ERR! ../src/serialport.cpp:329:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
npm ERR!      results->Set(Nan::New<v8::String>("cts").ToLocalChecked(), Nan::New<v8::Boolean>(data->cts));
npm ERR!                                                                                                 ^
npm ERR! In file included from /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-array-buffer.h:13,
npm ERR!                  from /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8.h:24,
npm ERR!                  from /home/iobroker/.cache/node-gyp/18.18.1/include/node/node.h:73,
npm ERR!                  from ../../../nan/nan.h:62,
npm ERR!                  from ../src/./serialport.h:6,
npm ERR!                  from ../src/serialport.cpp:1:
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:244:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
npm ERR!    V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
npm ERR!                                      ^~~
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:244:37: note:   candidate expects 3 arguments, 2 provided
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:247:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
npm ERR!    V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
npm ERR!                                      ^~~
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:247:37: note:   candidate expects 3 arguments, 2 provided
npm ERR! ../src/serialport.cpp:330:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
npm ERR!      results->Set(Nan::New<v8::String>("dsr").ToLocalChecked(), Nan::New<v8::Boolean>(data->dsr));
npm ERR!                                                                                                 ^
npm ERR! In file included from /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-array-buffer.h:13,
npm ERR!                  from /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8.h:24,
npm ERR!                  from /home/iobroker/.cache/node-gyp/18.18.1/include/node/node.h:73,
npm ERR!                  from ../../../nan/nan.h:62,
npm ERR!                  from ../src/./serialport.h:6,
npm ERR!                  from ../src/serialport.cpp:1:
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:244:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
npm ERR!    V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
npm ERR!                                      ^~~
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:244:37: note:   candidate expects 3 arguments, 2 provided
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:247:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
npm ERR!    V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
npm ERR!                                      ^~~
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:247:37: note:   candidate expects 3 arguments, 2 provided
npm ERR! ../src/serialport.cpp:331:96: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::FactoryBase<v8::Boolean>::return_t)’
npm ERR!      results->Set(Nan::New<v8::String>("dcd").ToLocalChecked(), Nan::New<v8::Boolean>(data->dcd));
npm ERR!                                                                                                 ^
npm ERR! In file included from /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-array-buffer.h:13,
npm ERR!                  from /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8.h:24,
npm ERR!                  from /home/iobroker/.cache/node-gyp/18.18.1/include/node/node.h:73,
npm ERR!                  from ../../../nan/nan.h:62,
npm ERR!                  from ../src/./serialport.h:6,
npm ERR!                  from ../src/serialport.cpp:1:
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:244:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
npm ERR!    V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
npm ERR!                                      ^~~
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:244:37: note:   candidate expects 3 arguments, 2 provided
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:247:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
npm ERR!    V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
npm ERR!                                      ^~~
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:247:37: note:   candidate expects 3 arguments, 2 provided
npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’:
npm ERR! ../src/serialport.cpp:363:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
npm ERR!    uv_queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate);
npm ERR!                                                                             ^~~~~~~~~~~~~~~~~~~~
npm ERR! ../src/serialport.cpp: In function ‘void EIO_AfterGetBaudRate(uv_work_t*)’:
npm ERR! ../src/serialport.cpp:378:106: error: no matching function for call to ‘v8::Object::Set(v8::Local<v8::String>, Nan::imp::IntegerFactory<v8::Integer>::return_t)’
npm ERR!      results->Set(Nan::New<v8::String>("baudRate").ToLocalChecked(), Nan::New<v8::Integer>(data->baudRate));
npm ERR!                                                                                                           ^
npm ERR! In file included from /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-array-buffer.h:13,
npm ERR!                  from /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8.h:24,
npm ERR!                  from /home/iobroker/.cache/node-gyp/18.18.1/include/node/node.h:73,
npm ERR!                  from ../../../nan/nan.h:62,
npm ERR!                  from ../src/./serialport.h:6,
npm ERR!                  from ../src/serialport.cpp:1:
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:244:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, v8::Local<v8::Value>, v8::Local<v8::Value>)’
npm ERR!    V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context,
npm ERR!                                      ^~~
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:244:37: note:   candidate expects 3 arguments, 2 provided
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:247:37: note: candidate: ‘v8::Maybe<bool> v8::Object::Set(v8::Local<v8::Context>, uint32_t, v8::Local<v8::Value>)’
npm ERR!    V8_WARN_UNUSED_RESULT Maybe<bool> Set(Local<Context> context, uint32_t index,
npm ERR!                                      ^~~
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/v8-object.h:247:37: note:   candidate expects 3 arguments, 2 provided
npm ERR! ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’:
npm ERR! ../src/serialport.cpp:409:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type]
npm ERR!    uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain);
npm ERR!                                                                       ^~~~~~~~~~~~~~
npm ERR! ../src/serialport.cpp: At global scope:
npm ERR! ../src/serialport.cpp:430:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses]
npm ERR!  SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) {
npm ERR!                             ^
npm ERR! ../src/serialport.cpp:449:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses]
npm ERR!  SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) {
npm ERR!                               ^
npm ERR! In file included from ../../../nan/nan.h:62,
npm ERR!                  from ../src/./serialport.h:6,
npm ERR!                  from ../src/serialport.cpp:1:
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/node.h:1014:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type]
npm ERR!        (node::addon_register_func) (regfunc),                          \
npm ERR!                                            ^
npm ERR! /home/iobroker/.cache/node-gyp/18.18.1/include/node/node.h:1048:3: note: in expansion of macro ‘NODE_MODULE_X’
npm ERR!    NODE_MODULE_X(modname, regfunc, NULL, 0)  // NOLINT (readability/null_usage)
npm ERR!    ^~~~~~~~~~~~~
npm ERR! ../src/serialport.cpp:483:1: note: in expansion of macro ‘NODE_MODULE’
npm ERR!  NODE_MODULE(serialport, init);
npm ERR!  ^~~~~~~~~~~
npm ERR! make: *** [bindings.target.mk:114: Release/obj.target/bindings/src/serialport.o] Fehler 1
npm ERR! gyp ERR! build error
npm ERR! gyp ERR! stack Error: `make` failed with exit code: 2
npm ERR! gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:203:23)
npm ERR! gyp ERR! stack     at ChildProcess.emit (node:events:517:28)
npm ERR! gyp ERR! stack     at ChildProcess._handle.onexit (node:internal/child_process:292:12)
npm ERR! gyp ERR! System Linux 5.10.103-v7+
npm ERR! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/@serialport/bindings
npm ERR! gyp ERR! node -v v18.18.1
npm ERR! gyp ERR! node-gyp -v v9.4.0
npm ERR! gyp ERR! not ok

npm ERR! A complete log of this run can be found in: /home/iobroker/.npm/_logs/2023-10-12T04_24_27_413Z-debug-0.log
Adapter "system.adapter.vis.0" restarted.
upload [4] fritzdect.admin /opt/iobroker/node_modules/iobroker.fritzdect/admin/admin.d.ts admin.d.ts video/mp2t
upload [3] fritzdect.admin /opt/iobroker/node_modules/iobroker.fritzdect/admin/fritzdect_logo.png fritzdect_logo.png image/png
upload [2] fritzdect.admin /opt/iobroker/node_modules/iobroker.fritzdect/admin/index_m.html index_m.html text/html
upload [1] fritzdect.admin /opt/iobroker/node_modules/iobroker.fritzdect/admin/style.css style.css text/css
upload [0] fritzdect.admin /opt/iobroker/node_modules/iobroker.fritzdect/admin/words.js words.js application/javascript

Qix- created this issue in visionmedia/debug

closed ReDos Vulnerability Regression Visibility Notice #797

Qix- created this issue in visionmedia/debug

closed ReDos Vulnerability Regression Visibility Notice #797

Qix- created this issue in visionmedia/debug

closed ReDos Vulnerability Regression Visibility Notice #797

mikeal created this issue in request/request

open Request’s Past, Present and Future #3142

Thomas Braun

@dlaurenz

Buster ist tot und du hampelst da als root herum und für 1GB läuft da auch viel zu viel komisches Zeug mit.

Was ist saltprojext? Was macht webmin auf der Kiste? Was sind das für seltsame mounts?

? Offline

@thomas-braun sagte in Update ioBroker klappt nicht:

saltprojext

Moin,

das ist ein Automatisierungstool salt, mit Client/Server, Du schreibst Dir Kochbücher für die verschiedenen Nodes, die Du dann einfach von einer zentralen Stelle, verteilen kannst oder der Node holt sich die Informationen mittel Pull vom Server.

Ansible, Terraform, Puppet, Chef und Salt

VG
Bernd

DLaurenz

@thomas-braun

Salt ist eine Konfiguration Management und der RPI macht FHEM & Zigbee... die Mounts sind für Backups

willst du mir sagen dass ein update auf bulls-eye das problem behebt?

deine anmerkungen gehen überhaupt nicht in richtung lösungsfindung

Thomas Braun

@dlaurenz sagte in Update ioBroker klappt nicht:

willst du mir sagen dass ein update auf bulls-eye das problem behebt?

Nö. Aber verschafft erstmal eine sinnvolle Basis für weiteres.

deine anmerkungen gehen überhaupt nicht in richtung lösungsfindung

Warum nicht?

DLaurenz

@thomas-braun

gut mache ich - melde mich

DLaurenz

@thomas-braun

"hampelst"....

übirgens habe ich noch einen buster-pi, der lässt sich einwandfrei updaten und sieht genauso aus...

(salt, webmin, root)

ich betreibe das ganze schon seit den anfangstagen von iobroker

Thomas Braun

@dlaurenz

Und das bedeutet jetzt für den Patienten genau was?

DLaurenz

@thomas-braun

2x raspbian, 2x debian buster, 2x iobroker, 2x Node 18, einer lässt sich updaten, der andere nicht.

Wie wahrscheinlich ist es, dass es am OS liegt?

DJMarc75

@dlaurenz sagte in Update ioBroker klappt nicht:

10.2.0

Die NPM passt nicht zu NODE 18.18.1

DLaurenz

@djmarc75

laut iob diag ok....

Nodejs-Installation:    /usr/bin/nodejs         v18.18.1
                        /usr/bin/node           v18.18.1
                        /usr/bin/npm            10.2.0
                        /usr/bin/npx            10.2.0
                        /usr/bin/corepack       0.21.0
 
Recommended versions are nodejs  and npm
Your nodejs installation is correct

wie bekomme ich die hoch? bzw. welche version muss es sein?

DLaurenz

@thomas-braun sagte in Update ioBroker klappt nicht:

@dlaurenz

Buster ist tot und du hampelst da als root herum und für 1GB läuft da auch viel zu viel komisches Zeug mit.

Was ist saltprojext? Was macht webmin auf der Kiste? Was sind das für seltsame mounts?

ich muss gerade schmunzeln während das update zu bulls-eye läuft....

ihr liefert selber ein Image mit buster aus?

Image basiert auf dem aktuellen Raspberry Pi OS (Buster) Lite

https://forum.iobroker.net/topic/41520/raspberry-os-lite-image-for-with-iobroker

Thomas Braun

@dlaurenz sagte in Update ioBroker klappt nicht:

Wie wahrscheinlich ist es, dass es am OS liegt?

Egal. Die Version ist obsolet... TOT.

@dlaurenz sagte in Update ioBroker klappt nicht:

wie bekomme ich die hoch? bzw. welche version muss es sein?

sudo apt install --reinstall nodejs

Codierknecht

@dlaurenz sagte in Update ioBroker klappt nicht:

laut iob diag ok....

Nö. Der sagt Dir lediglich, dass Node korrekt installiert ist.
Der zur Node-Version passende NPM hat immer die "halbe" Versionsnummer.
Node 18 also mit NPM 9. Node 20 dementsprechend NPM 10.

Ohne @Thomas-Braun hier zu nahe treten oder seine Arbeit an der Ecke schmälern zu wollen: iob diag ist ein Hilfsmittel ... mehr nicht.
Es nimmt einem nicht die Arbeit ab.

"hampelst"....

Das allererste was ein Linux-Admin lernt: Man agiert im System nicht als User "root".
Alles was man mit der Hand am Arm im System treibt, wird allerhöchstens mit temporären Rechten per "sudo" ausgeführt. Da mit "root" unterwegs zu sein, ist reine Bequemlichkeit und führt in aller Regel zu Fehlern.
Es gibt da so einen schönen Spruch, der sinngemäß lautet: "Nur ausgewiesene Profis sollten sich als root anmelden - und die werden es nicht tun"

Ansonsten wurde ja schon erwähnt:
Ein Pi3 mit 1 GB RAM ist die absolute Minimalausstattung und mittlerweile fast nicht mehr sinnvoll (produktiv) einsetzbar. Da noch zusätzliche Verwaltungstools einzusetzen verbietet sich fast von selbst.
Debian "buster" liegt inzwischen 2 Versionen zurück und ist definitiv tot. Inzwischen gibt's auch offiziell "bookworm" für den Pi.

Thomas Braun

@codierknecht sagte in Update ioBroker klappt nicht:

iob diag ist ein Hilfsmittel ... mehr nicht.
Es nimmt einem nicht die Arbeit ab.

Mehr soll es auch nicht sein.

Homoran

@dlaurenz sagte in Update ioBroker klappt nicht:

ihr liefert selber ein Image mit buster aus?

datum gelesen?
Das war 2021

DLaurenz

@homoran
genau, deswegen ist es auch offiziell verlinkt.... wenn etwas nicht mehr freigegeben oder supported ist, gehört es entsprechend makiert, macht man so...

NEWS