UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[A Former User]

Moin,

so, da ich vom RasPI keine Ahnung habe, bin ich hier erst einmal still und lese noch mit, aktuell sind die SBCs nicht interessant für mich, das wird sich erst ändern, wenn es interessante RiscV Boards gibt.

VG
Bernd

[bob der 1.]

@homoran sagte in RPI 4 Update auf ?:

@bob-der-1 sagte in RPI 4 Update auf ?:

1.80 GHz:95.14%

Das ist ok! Die Temperatur, jedoch nicht.

@bob-der-1 sagte in RPI 4 Update auf ?:

Was wiederum kaum sein kann da ein 20 A Netzteil dran hängt

das wären 100W reicht zum CPU-kochen.

wieviel Volt?

die externe Stromversorgung für die SSD funktioniert auch?
hängt da sonst was am USB?

oder irgendwas am USB3?

Gemessen 5.05volt

[Homoran]

@bob-der-1 sagte in RPI 4 Update auf ?:

Gemessen 5.05volt

könnte etwas knapp sein.

und die übrigen Antworten?

[bob der 1.]

@homoran

Ausser der SSD nichts,klar die aber am USB 3.
Kann natürlich nachstellen,zw.5.05 umd 5.1V kann das aber ein Messfehler sein.Kann ihn aber auch testweise umhängen,im Kasten sind noch 2 Netzteile

[Homoran]

@bob-der-1 sagte in RPI 4 Update auf ?:

die aber am USB 3.

dann häng die mal an den USB2!
Der USB3 ist beim Pi4 wegen HF Interferenzn nicht zu empfehlen.

[bob der 1.]

@homoran

• Aktuelle Core temp. 63°C
• SSD hängt nun an USB 2
• Das Netzteil läuft nun auf 5,1 Volt

der neue Kühler kommt morgen,abwarten was es bringt.

[bob der 1.]

Neuer Kühler installiert....51°C.
Keine Verbessung,auch nicht beim Abschalten vom FritzBox Checkp. Adapter....

[A Former User]

@bob-der-1 sagte in RPI 4 Update auf ?:

Keine Verbessung,auch nicht beim Abschalten vom FritzBox Checkp. Adapter....

Moin,

bitte die Aussagen mit Informationen unterlegen, also die Sachen posten, die Du oben schon einmal gepostet hast.

# iob diag
# iotop
# top

Mit Webif meinst Du das WEB Interface, also http://iobroker:8081? Das ist ja dann evtl. eher ein Netzwerkproblem, was befindet sich denn da noch so in Deinem Netzwerk, ist der RasPI evtl. nur mit 100 MBit angebunden.

VG
Bernd

[bob der 1.]

@dp20eic

Morgen,bin jetzt beim Nachtdienst.

[bob der 1.]

@dp20eic sagte in RPI 4 Update auf ?:
top

top - 10:58:52 up 4 min,  1 user,  load average: 5.95, 3.45, 1.45
Tasks: 197 total,   5 running, 192 sleeping,   0 stopped,   0 zombie
%Cpu(s): 49.6 us,  6.9 sy,  0.0 ni, 41.1 id,  0.0 wa,  0.0 hi,  2.5 si,  0.0 st
MiB Mem :   7811.3 total,   4275.8 free,   2696.0 used,    839.5 buff/cache
MiB Swap:    100.0 total,    100.0 free,      0.0 used.   4992.5 avail Mem

    PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     TIME+ COMMAND
    577 iobroker  20   0 1244720 492500  41800 R  73.8   6.2   3:31.86 iobroker.js-con
    919 iobroker  20   0  989960 300936  36332 R  55.0   3.8   1:48.71 io.javascript.0
   1613 iobroker  20   0 5005852  81736  38176 S  27.5   1.0   0:10.74 io.fb-checkpres
   1055 iobroker  20   0  700696 137984  36580 S  15.6   1.7   0:35.58 io.shelly.0
   2250 iobroker  20   0  810368  82152  37672 S  14.6   1.0   0:09.95 io.tankerkoenig
    999 iobroker  20   0  858636 216748  36324 S  12.6   2.7   0:26.02 io.mqtt.0
    945 iobroker  20   0  946452  82908  37452 S  12.3   1.0   0:12.64 io.alexa2.0
    861 iobroker  20   0  949896 154404  43104 S   5.3   1.9   0:22.21 io.admin.0
    900 iobroker  20   0  700108  79128  36268 R   4.3   1.0   0:12.41 io.history.0
   2638 iobroker  20   0  689712  94408  42232 S   2.3   1.2   0:10.00 io.upnp.0
    984 iobroker  20   0  680056  76936  36448 R   1.7   1.0   0:10.67 io.modbus.0
   1025 iobroker  20   0  676380  70712  36420 S   1.0   0.9   0:06.42 io.ping.0
   1353 iobroker  20   0  677696  72436  36896 S   0.7   0.9   0:06.69 io.deconz.0
   1537 iobroker  20   0  674896  77220  36324 S   0.7   1.0   0:07.82 io.energiefluss
   1683 iobroker  20   0  673712  67748  36968 S   0.7   0.8   0:06.08 io.fritzdect.0
   2071 iobroker  20   0 5160044  96132  38992 S   0.7   1.2   0:09.55 io.ring.0
   2099 iobroker  20   0  672864  68712  36404 S   0.7   0.9   0:06.76 io.sma-em.0
   2671 iobroker  20   0  672308  66408  36432 S   0.7   0.8   0:03.58 io.vis-inventwo
     15 root      20   0       0      0      0 I   0.3   0.0   0:01.19 rcu_preempt
     54 root      20   0       0      0      0 D   0.3   0.0   0:01.56 kworker/2:1+events_freezable
    101 root     -51   0       0      0      0 S   0.3   0.0   0:00.74 irq/38-mmc0
   1140 iobroker  20   0  682880  78832  36268 S   0.3   1.0   0:09.63 io.sonoff.0
   1220 iobroker  20   0 4882688  88860  43188 S   0.3   1.1   0:06.83 io.backitup.0
   3026 pi        20   0    7016   2856   2324 R   0.3   0.0   0:00.14 top
      1 root      20   0  165224  10340   7436 S   0.0   0.1   0:02.69 systemd
      2 root      20   0       0      0      0 S   0.0   0.0   0:00.02 kthreadd
      3 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 rcu_gp
      4 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 rcu_par_gp
      5 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 slub_flushwq
      6 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 netns
      7 root      20   0       0      0      0 I   0.0   0.0   0:00.00 kworker/0:0-events
      8 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/0:0H-kblockd
      9 root      20   0       0      0      0 I   0.0   0.0   0:02.30 kworker/u8:0-events_unbound
     10 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 mm_percpu_wq
     11 root      20   0       0      0      0 I   0.0   0.0   0:00.00 rcu_tasks_kthread
     12 root      20   0       0      0      0 I   0.0   0.0   0:00.00 rcu_tasks_rude_kthread
     13 root      20   0       0      0      0 I   0.0   0.0   0:00.00 rcu_tasks_trace_kthread
     14 root      20   0       0      0      0 S   0.0   0.0   0:00.14 ksoftirqd/0
     16 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/0
     17 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/0
     18 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/1
     19 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/1
     20 root      20   0       0      0      0 S   0.0   0.0   0:00.08 ksoftirqd/1
     21 root      20   0       0      0      0 I   0.0   0.0   0:00.00 kworker/1:0-rcu_gp
     22 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/1:0H-kblockd
     23 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/2
     24 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/2
     25 root      20   0       0      0      0 S   0.0   0.0   0:00.08 ksoftirqd/2
     26 root      20   0       0      0      0 I   0.0   0.0   0:00.00 kworker/2:0-cgroup_destroy
     27 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/2:0H-kblockd
     28 root      20   0       0      0      0 S   0.0   0.0   0:00.00 cpuhp/3
     29 root      rt   0       0      0      0 S   0.0   0.0   0:00.00 migration/3
     30 root      20   0       0      0      0 S   0.0   0.0   0:00.07 ksoftirqd/3
     31 root      20   0       0      0      0 I   0.0   0.0   0:00.00 kworker/3:0-events
     32 root       0 -20       0      0      0 I   0.0   0.0   0:00.00 kworker/3:0H-events_highpri
     33 root      20   0       0      0      0 S   0.0   0.0   0:00.00 kdevtmpfs

iotop

Total DISK READ:         0.00 B/s | Total DISK WRITE:        11.99 K/s
Current DISK READ:       0.00 B/s | Current DISK WRITE:      19.18 K/s
    TID  PRIO  USER     DISK READ  DISK WRITE  SWAPIN     IO>    COMMAND
    108 ?sys root        0.00 B/s    9.59 K/s  ?unavailable?  [jbd2/sda2-8]
    577 ?sys iobroker    0.00 B/s    2.40 K/s  ?unavailable?  iobroker.js-controller
      1 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  init
      2 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kthreadd]
      3 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [rcu_gp]
      4 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [rcu_par_gp]
      5 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [slub_flushwq]
      6 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [netns]
      8 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/0:0H-kblockd]
      9 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/u8:0-events_unbound]
     10 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [mm_percpu_wq]
     11 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [rcu_tasks_kthread]
     12 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [rcu_tasks_rude_kthread]
     13 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [rcu_tasks_trace_kthread]
     14 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [ksoftirqd/0]
     15 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [rcu_preempt]
     16 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [migration/0]
     17 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [cpuhp/0]
     18 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [cpuhp/1]
     19 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [migration/1]
     20 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [ksoftirqd/1]
     22 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/1:0H-kblockd]
     23 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [cpuhp/2]
     24 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [migration/2]
     25 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [ksoftirqd/2]
     27 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/2:0H-kblockd]
     28 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [cpuhp/3]
     29 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [migration/3]
     30 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [ksoftirqd/3]
     31 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/3:0-events]
     32 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/3:0H-events_highpri]
     33 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kdevtmpfs]
     34 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [inet_frag_wq]
     36 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kauditd]
     38 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [khungtaskd]
     39 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/u8:1-writeback]
     40 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [oom_reaper]
     41 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [writeback]
     42 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kcompactd0]
     43 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kintegrityd]
     44 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kblockd]
     45 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [blkcg_punt_bio]
     46 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [watchdogd]
     47 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/u8:2-events_unbound]
     49 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/3:1H-kblockd]
     50 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [rpciod]
     51 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [xprtiod]
     54 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/2:1-events_freezable]
     55 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kswapd0]
     56 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [nfsiod]
     57 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kthrotld]
     60 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/3:2-events]
     62 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/0:3-events]
     63 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/0:4-events]
     65 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [kworker/1:2-mm_percpu_wq]
     66 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [hwrng]
     67 ?sys root        0.00 B/s    0.00 B/s  ?unavailable?  [iscsi_conn_clea]

Iob diag

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.4
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 11:00:39 up 6 min,  1 user,  load average: 2.01, 2.88, 1.48
CPU threads: 4

Raspberry only:
throttled=0x0
Other values than 0x0 hint to temperature/voltage problems
temp=48.4'C
volt=0.9460V

*** Time and Time Zones ***
               Local time: Mon 2023-08-14 11:00:40 CEST
           Universal time: Mon 2023-08-14 09:00:40 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** User and Groups ***
pi
/home/pi
pi adm dialout cdrom sudo audio video plugdev games users input render netdev gpio i2c spi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:       tty
Boot Target:    multi-user.target

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            7.8G        2.6G        4.3G        1.0M        843M        5.1G
Swap:            99M          0B         99M
Total:          7.9G        2.6G        4.4G

         7811 M total memory
         2632 M used memory
         2693 M active memory
          598 M inactive memory
         4334 M free memory
           97 M buffer memory
          746 M swap cache
           99 M total swap
            0 M used swap
           99 M free swap

Raspberry only:
oom events: 0
lifetime oom required: 0 Mbytes
total time in oom handler: 0 ms
max time spent in oom handler: 0 ms

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      110G  6.4G   99G   7% /
devtmpfs       devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     1.6G  1.2M  1.6G   1% /run
tmpfs          tmpfs     5.0M  4.0K  5.0M   1% /run/lock
/dev/sda1      vfat      255M   31M  225M  13% /boot
tmpfs          tmpfs     782M     0  782M   0% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Mon Aug 14 10:54:08 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0  smsc95xx.macaddr=DC:A6:32:E2:27:44 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000  console=ttyS0,115200 console=tty1 root=PARTUUID=80339489-02 rootfstype=ext4 fsck.repair=yes rootwait
[Mon Aug 14 10:54:13 2023] EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
[Mon Aug 14 10:54:13 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
[Mon Aug 14 10:54:16 2023] EXT4-fs (sda2): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE    FSTYPE OPTIONS
/       /dev/sda2 ext4   rw,noatime
`-/boot /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
1.3G    /var/
766M    /var/log
729M    /var/log/journal/f5220850684b470b91348abf7842fc45
729M    /var/log/journal
301M    /var/cache

Archived and active journals take up 728.0M in the file system.

/opt/iobroker/backups:
661M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
863M    /opt/iobroker/iobroker-data/
495M    /opt/iobroker/iobroker-data/files
279M    /opt/iobroker/iobroker-data/backup-objects
88M     /opt/iobroker/iobroker-data/files/echarts.admin
57M     /opt/iobroker/iobroker-data/files/echarts

The five largest files in iobroker-data are:
62M     /opt/iobroker/iobroker-data/states.jsonl
33M     /opt/iobroker/iobroker-data/files/iot.admin/static/js/main.1797d034.js.map
28M     /opt/iobroker/iobroker-data/objects.jsonl
23M     /opt/iobroker/iobroker-data/files/echarts/static/js/main.eb0afecd.js.map
23M     /opt/iobroker/iobroker-data/files/echarts.admin/static/js/main.7952f0f7.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.17.1
/usr/bin/node           v18.17.1
/usr/bin/npm            9.6.7
/usr/bin/npx            9.6.7


nodejs:
  Installed: 18.17.1-deb-1nodesource1
  Candidate: 18.17.1-deb-1nodesource1
  Version table:
 *** 18.17.1-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u4 500
        500 http://security.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.12~dfsg-1~deb11u3 500
        500 http://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     7.1.1

Adapters from github:   5

Adapter State
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port:xxxx , bind: xxx, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : raspberrypi                              -  enabled
  system.adapter.alias-manager.0          : alias-manager         : raspberrypi                              -  enabled
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
  system.adapter.broadlink2.0             : broadlink2            : raspberrypi                              - disabled
  system.adapter.bydbatt.0                : bydbatt               : raspberrypi                              - disabled
  system.adapter.daswetter.0              : daswetter             : raspberrypi                              -  enabled
+ system.adapter.deconz.0                 : deconz                : raspberrypi                              -  enabled, port: 80
+ system.adapter.device-reminder.0        : device-reminder       : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.echarts.0                : echarts               : raspberrypi                              -  enabled
+ system.adapter.email.0                  : email                 : raspberrypi                              -  enabled
+ system.adapter.energiefluss.0           : energiefluss          : raspberrypi                              -  enabled
  system.adapter.enigma2.0                : enigma2               : raspberrypi                              - disabled
  system.adapter.enigma2.1                : enigma2               : raspberrypi                              - disabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : raspberrypi                              -  enabled
+ system.adapter.fritzdect.0              : fritzdect             : raspberrypi                              -  enabled
+ system.adapter.fullybrowser.0           : fullybrowser          : raspberrypi                              -  enabled
  system.adapter.gartenbewaesserung.0     : gartenbewaesserung    : raspberrypi                              - disabled
+ system.adapter.history.0                : history               : raspberrypi                              -  enabled
  system.adapter.homeconnect.0            : homeconnect           : raspberrypi                              - disabled
  system.adapter.homekit-controller.0     : homekit-controller    : raspberrypi                              - disabled
  system.adapter.ical.0                   : ical                  : raspberrypi                              -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : raspberrypi                              -  enabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : raspberrypi                              -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : raspberrypi                              -  enabled
+ system.adapter.info.0                   : info                  : raspberrypi                              -  enabled
+ system.adapter.iot.0                    : iot                   : raspberrypi                              -  enabled
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.lg-thinq.0               : lg-thinq              : raspberrypi                              -  enabled
+ system.adapter.lgtv.0                   : lgtv                  : raspberrypi                              -  enabled
+ system.adapter.linux-control.0          : linux-control         : raspberrypi                              -  enabled
  system.adapter.mihome-cloud.0           : mihome-cloud          : raspberrypi                              - disabled
  system.adapter.mihome-vacuum.0          : mihome-vacuum         : raspberrypi                              - disabled, port: xxxx
  system.adapter.mihome.0                 : mihome                : raspberrypi                              - disabled, port: xxxx, bind: 192.168.178.70
+ system.adapter.modbus.0                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : raspberrypi                              -  enabled
+ system.adapter.node-red.0               : node-red              : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0
  system.adapter.openweathermap.0         : openweathermap        : raspberrypi                              -  enabled
  system.adapter.parcel.0                 : parcel                : raspberrypi                              - disabled
+ system.adapter.ping.0                   : ping                  : raspberrypi                              -  enabled
+ system.adapter.plex.0                   : plex                  : raspberrypi                              -  enabled
+ system.adapter.ring.0                   : ring                  : raspberrypi                              -  enabled
+ system.adapter.rpi2.0                   : rpi2                  : raspberrypi                              -  enabled
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : raspberrypi                              -  enabled, port: xxxx, bind: xxx
+ system.adapter.signal-cmb.0             : signal-cmb            : raspberrypi                              -  enabled
+ system.adapter.sma-em.0                 : sma-em                : raspberrypi                              -  enabled
+ system.adapter.socketio.0               : socketio              : raspberrypi                              -  enabled, port: xxx, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: xxxx, bind: 0.0.0.0
+ system.adapter.tankerkoenig.0           : tankerkoenig          : raspberrypi                              -  enabled
+ system.adapter.tr-064.0                 : tr-064                : raspberrypi                              -  enabled
+ system.adapter.trashschedule.0          : trashschedule         : raspberrypi                              -  enabled
+ system.adapter.upnp.0                   : upnp                  : raspberrypi                              -  enabled
  system.adapter.vis-2-widgets-jaeger-design.0: vis-2-widgets-jaeger-design: raspberrypi                              -  enabled
  system.adapter.vis-bars.0               : vis-bars              : raspberrypi                              -  enabled
  system.adapter.vis-canvas-gauges.0      : vis-canvas-gauges     : raspberrypi                              -  enabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : raspberrypi                              -  enabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : raspberrypi                              -  enabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : raspberrypi                              -  enabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : raspberrypi                              -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : raspberrypi                              -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : raspberrypi                              -  enabled
  system.adapter.vis-justgage.0           : vis-justgage          : raspberrypi                              -  enabled
  system.adapter.vis-keyboard.0           : vis-keyboard          : raspberrypi                              -  enabled
  system.adapter.vis-lcars.0              : vis-lcars             : raspberrypi                              -  enabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : raspberrypi                              -  enabled
  system.adapter.vis-material-webfont.0   : vis-material-webfont  : raspberrypi                              -  enabled
  system.adapter.vis-material.0           : vis-material          : raspberrypi                              -  enabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : raspberrypi                              -  enabled
  system.adapter.vis-metro.0              : vis-metro             : raspberrypi                              -  enabled
  system.adapter.vis-players.0            : vis-players           : raspberrypi                              -  enabled
  system.adapter.vis-plumb.0              : vis-plumb             : raspberrypi                              -  enabled
  system.adapter.vis-timeandweather.0     : vis-timeandweather    : raspberrypi                              -  enabled
  system.adapter.vis-weather.0            : vis-weather           : raspberrypi                              -  enabled
  system.adapter.vis.0                    : vis                   : raspberrypi                              -  enabled
  system.adapter.weatherunderground.0     : weatherunderground    : raspberrypi                              -  enabled
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wled.0                   : wled                  : raspberrypi                              -  enabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: x, bind: 1x, run as: admin
+ system.adapter.deconz.0                 : deconz                : raspberrypi                              -  enabled, port: x
+ system.adapter.mqtt.0                   : mqtt                  : raspberrypi                              -  enabled, port: x, bind: 0.0.0.0
+ system.adapter.node-red.0               : node-red              : raspberrypi                              -  enabled, port: x0, bind: 0.0.0.0
+ system.adapter.shelly.0                 : shelly                : raspberrypi                              -  enabled, port: x, bind: 0.0.0.0
+ system.adapter.shelly.1                 : shelly                : raspberrypi                              -  enabled, port: x, bind: 1x
+ system.adapter.socketio.0               : socketio              : raspberrypi                              -  enabled, port:xx, bind: 0.0.0.0, run as: admin
+ system.adapter.sonoff.0                 : sonoff                : raspberrypi                              -  enabled, port: x, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : raspberrypi                              -  enabled, port: x, bind: 0.0.0.0, run as: admin

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json
live-stable   : http://iobroker.live/repo/sources-dist.json
live-beta     : http://iobroker.live/repo/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.24.1   , installed 3.24.1
Adapter    "alias-manager": 1.2.4    , installed 1.2.6
Adapter    "backitup"     : 2.6.23   , installed 2.6.23
Adapter    "broadlink2"   : 2.1.5    , installed 2.1.5
Adapter    "bydbatt"      : 1.0.8    , installed 1.0.8
Adapter    "bydhvs"       : 1.4.0    , installed 1.4.0
Adapter    "daswetter"    : 3.1.10   , installed 3.1.10
Adapter    "deconz"       : 1.3.21   , installed 1.3.21
Adapter    "device-reminder": 1.2.9  , installed 1.2.9
Adapter    "discovery"    : 3.1.0    , installed 3.2.0
Adapter    "echarts"      : 1.5.1    , installed 1.5.1
Adapter    "email"        : 1.2.0    , installed 1.2.0
Adapter    "fb-checkpresence": 1.2.2 , installed 1.2.2
Adapter    "fritzdect"    : 2.3.1    , installed 2.3.1
Adapter    "fullybrowser" : 2.1.2    , installed 2.1.2
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "homeconnect"  : 1.1.1    , installed 1.1.1
Adapter    "homekit-controller": 0.5.8, installed 0.5.8
Adapter    "ical"         : 1.13.3   , installed 1.13.3
Adapter    "icons-mfd-png": 1.1.0    , installed 1.1.0
Adapter    "icons-mfd-svg": 1.1.0    , installed 1.1.0
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "info"         : 1.9.26   , installed 1.9.26
Adapter    "iot"          : 1.14.5   , installed 2.0.11
Adapter    "javascript"   : 7.0.3    , installed 7.1.1
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "lg-thinq"     : 0.1.4    , installed 0.1.4
Adapter    "lgtv"         : 1.1.10   , installed 1.1.12
Adapter    "linux-control": 1.1.3    , installed 1.1.5
Adapter    "mihome"       : 1.4.0    , installed 1.4.0
Adapter    "mihome-cloud" : 0.1.0    , installed 0.1.0
Adapter    "mihome-vacuum": 3.11.0   , installed 3.11.0
Adapter    "modbus"       : 5.0.11   , installed 5.0.11
Adapter    "mqtt"         : 4.1.1    , installed 4.1.1
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "node-red"     : 4.0.3    , installed 4.0.3
Adapter    "openweathermap": 0.3.9   , installed 0.3.11
Adapter    "parcel"       : 0.0.27   , installed 0.0.32
Adapter    "ping"         : 1.5.3    , installed 1.6.2
Adapter    "plex"         : 0.9.1    , installed 0.9.1
Adapter    "ring"         : 3.2.2    , installed 3.4.0
Adapter    "rpi2"         : 1.3.2    , installed 1.3.2
Adapter    "shelly"       : 6.4.1    , installed 6.4.1
Adapter    "signal-cmb"   : 0.3.0    , installed 0.3.0
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "sma-em"       : 0.7.0    , installed 0.7.0
Adapter    "socketio"     : 4.2.0    , installed 6.4.0
Adapter    "sonoff"       : 2.5.3    , installed 2.5.7
Adapter    "tankerkoenig" : 3.3.7    , installed 3.3.7
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "trashschedule": 2.2.0    , installed 2.2.0
Adapter    "upnp"         : 1.0.21   , installed 1.0.21
Adapter    "vis"          : 1.4.16   , installed 1.4.16
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-canvas-gauges": 1.0.1, installed 1.0.1
Adapter    "vis-colorpicker": 2.0.3  , installed 2.0.3
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-hqwidgets": 1.4.0    , installed 1.4.0
Adapter    "vis-icontwo"  : 0.96.0   , installed 0.96.0
Adapter    "vis-inventwo" : 3.3.3    , installed 3.3.3
Adapter    "vis-jqui-mfd" : 1.0.12   , installed 1.0.12
Adapter    "vis-justgage" : 1.0.2    , installed 1.0.2
Adapter    "vis-keyboard" : 0.0.2    , installed 0.0.2
Adapter    "vis-lcars"    : 1.1.1    , installed 1.1.1
Adapter    "vis-material-advanced": 1.7.2, installed 1.7.2
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-players"  : 0.1.6    , installed 0.1.6
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-timeandweather": 1.2.2, installed 1.2.2
Adapter    "vis-weather"  : 2.5.6    , installed 2.5.6
Adapter    "weatherunderground": 3.4.2, installed 3.4.2
Adapter    "web"          : 4.3.0    , installed 6.0.3
Adapter    "wled"         : 0.6.7    , installed 0.7.0
Adapter    "ws"           : 1.3.0    , installed 2.4.0

Objects and States
Please stand by - This may take a while
Objects:        23872
States:         21221

*** OS-Repositories and Updates ***
Hit:1 http://security.debian.org/debian-security bullseye-security InRelease
Hit:2 http://deb.debian.org/debian bullseye InRelease
Hit:3 http://deb.debian.org/debian bullseye-updates InRelease
Hit:4 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_18.x bullseye InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       13161      577/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       13100      577/iobroker.js-con
tcp        0      0 0.0.0.0:1880            0.0.0.0:*               LISTEN      1001       1991       956/node-red
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      1001       17487      1140/io.sonoff.0
tcp        0      0 0.0.0.0:1889            0.0.0.0:*               LISTEN      1001       2033       999/io.mqtt.0
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          13057      611/sshd: /usr/sbin
tcp        0      0 192.168.178.70:7777     0.0.0.0:*               LISTEN      1001       1874       861/io.admin.0
tcp        0      0 192.168.178.70:1888     0.0.0.0:*               LISTEN      1001       17438      1082/io.shelly.1
tcp6       0      0 :::22                   :::*                    LISTEN      0          15076      611/sshd: /usr/sbin
tcp6       0      0 :::41891                :::*                    LISTEN      1001       20136      2047/io.plex.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       23124      2144/io.socketio.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       16841      1235/io.web.0
udp        0      0 0.0.0.0:40428           0.0.0.0:*                           108        1689       426/avahi-daemon: r
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          15103      786/dhcpcd
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           1001       23952      2682/io.wled.0
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           108        1687       426/avahi-daemon: r
udp        0      0 0.0.0.0:9522            0.0.0.0:*                           1001       23957      2099/io.sma-em.0
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       15527      1055/io.shelly.0
udp        0      0 0.0.0.0:38718           0.0.0.0:*                           1001       25009      2638/io.upnp.0
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       24311      2638/io.upnp.0
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           1001       16229      1353/io.deconz.0
udp6       0      0 :::546                  :::*                                0          15115      786/dhcpcd
udp6       0      0 :::33664                :::*                                108        1690       426/avahi-daemon: r
udp6       0      0 :::5353                 :::*                                108        1688       426/avahi-daemon: r
udp6       0      0 :::1900                 :::*                                1001       16232      1353/io.deconz.0
udp6       0      0 :::1900                 :::*                                1001       16231      1353/io.deconz.0

[Thomas Braun]

@bob-der-1

Da läuft dir ein Skript aus dem Ruder.

[bob der 1.]

@thomas-braun sagte in RPI 4 Update auf ?:

@bob-der-1

Da läuft dir ein Skript aus dem Ruder.

kann ich erkennen welches das ist....ja ein paar

[Thomas Braun]

@bob-der-1

Nein, nur durch testen. Die Skripte alle ausschalten, die Hälfte wieder starten, etwas länger beobachten.
So das ganze eingrenzen.

[bob der 1.]

@thomas-braun sagte in RPI 4 Update auf ?:

@bob-der-1

Nein, nur durch testen. Die Skripte alle ausschalten, die Hälfte wieder starten, etwas länger beobachten.
So das ganze eingrenzen.

Ok dann mache ich mich an den Punkt.
So langsam kreisen wir den Fehler ein, aber ich lerne auch daraus.

melde mich ...sobald ich wieder was dazu schrieben kann.

[bob der 1.]

@thomas-braun

Sodele,

kreuz und quer Skripte abgeschalten und kein erfolg.

soll ich wieder die Ergebnisse posten top,Iob Diag?

[Ro75]

@bob-der-1 Du bist mit dem Javascript-Adapter auf "BETA". Gehe doch mal testweise auf die stable Version 7.0.3 zurück.

Ro.75

[bob der 1.]

@ro75
erledigt,auch nicht besser....
hatte den JS Adapter auch ganz aus....on daher kann es kein einzelnes Skript sein.

[Ro75]

@bob-der-1 dann alle Skripte aus. Wie ist es dann?

Wenn ok, dann ein Skript an, beobachten - wieder aus und wiederholen mit dem nächsten Skript. Bis du durch bist.

Ro75.

[Ro75]

@bob-der-1 sagte in RPI 4 Update auf ?:

hatte den JS Adapter auch ganz aus....on daher kann es kein einzelnes Skript sein.

Tolle Info.

Mach bitte mal den "fb-checkpresence" und "Alexa2" Adapter auf STOPP.

Wie ist es dann?

[bob der 1.]

@ro75

Also ich habe alle Skripte nacheinander ausgeschalten und auf Aus gelassen.
Aann ausgeschlaten und wieder an das nur eins Aus ist.
Alle Aus aber Adapter an.
Adapter Aus.

das war mit dem 7.11er und da war keine Verbesserung, mit dem /.0.3 auch nicht wenn ich ihn aus lasse, reboot bringt da auch keine Verbesserung.

Mittlerweile habe ich nochmal das netzteil getauscht, die Lankabel getauscht , ein andere Gerät ans Lankabel und zu guter letzt nur 4 Adapter angehabt.

Admin,web,Backup und Deconz.......auch nicht viel besser