[Frage] Realisierung Adapter UDP Keba Wallbox
-
@opaw ich gehe davon aus, dass das eine Steuerung ist, die direkt in der Firmware der Keba sitzt. Den Überschuss muss sie irgendwie selbst berechnen. Das kann Die vermutlich nur Keba sagen.
Und kein Ding wegen deines Doppelposts. Kann ja mal vorkommen. Es gibt leider User, bei denen solche Posts kein Versehen sind...
-
Ich habe heute nochmals PV abhängig mit der neuesten Version von Github geladen. Soweit funktioniert das Umschalten von 1 auf 3 Phasig, von 3 auf 1 Phasig, das Pausieren und stoppen da zu wenig Leistung.
Einziges Problem welches ich nochmals erzeugen konnte war, dass bei Pausieren nach einem 3 Phasigen Ladevorgang ein Fehler auftritt und daraufhin das Laden wieder gestartet wird, siehe Log. Dies kann entweder durch den von Dir genannten Timer (wie hier der Fall) passieren, der wohl ca. 5min oder 5:30 für Umschalten der Phasen ist ? (Im gestrigen Log ebenfalls zwischen 5 und 5:30 bis er das neue Kommando angenommen hat). Oder möglicher Auslöser wie schon zuvor gesehen durch die 2 aufeinander folgenden Schaltvorgänge, die zu ähnlichem Problem führen könnten (TBC).
Zeile 60: 2023-08-08 21:06:35.456 debug Sent 'x2 0' to 192.168.178.101:7090
..... Viele Versuche dazwischen um X2 zu schalten ....
Zeile 699: 2023-08-08 21:02:38.255 error Error received from wallbox: TCH-ERR:X2 : not allowed now
Zeile 705: 2023-08-08 21:02:37.971 info updating X2 for switch of phases from 1 to 0...
Zeile 714: 2023-08-08 21:02:37.970 info updating X2 for switch of phases from 1 to 0...
Zeile 732: 2023-08-08 21:02:37.653 info change pause status of wallbox from false to true
Zeile 945: 2023-08-08 21:01:05.759 info updating X2 for switch of phases from 0 to 1...
Zeile 975: 2023-08-08 21:01:05.018 info change pause status of wallbox from true to falseWie gesagt meine Vermutung nachdem ich versucht habe den Code nachzuvollziehen, dass 2 x schalten beim pausieren kommt von folgenden Zeilen:
https://github.com/iobroker-community-adapters/ioBroker.kecontact/blob/master/main.js#L1436
https://github.com/iobroker-community-adapters/ioBroker.kecontact/blob/master/main.js#L1538kecontact.0 2023-08-08 21:06:50.157 debug History ID received: 00 kecontact.0 2023-08-08 21:06:50.157 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 196044 } ' kecontact.0 2023-08-08 21:06:50.155 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:49.868 debug Available surplus: -624 kecontact.0 2023-08-08 21:06:49.857 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 230, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 196044 } ' kecontact.0 2023-08-08 21:06:49.856 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:49.556 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 0, "Max curr": 6000, "Max curr %": 100, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 0, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 0, "Serial": "23272616", "Sec": 196044 } ' kecontact.0 2023-08-08 21:06:49.555 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:42.957 debug UDP broadcast datagram from 192.168.178.101:7090: '{"State": 3}' kecontact.0 2023-08-08 21:06:42.957 debug UDP datagram from 192.168.178.101:7090: '{"State": 3}' kecontact.0 2023-08-08 21:06:39.353 debug UDP broadcast datagram from 192.168.178.101:7090: '{"State": 2}' kecontact.0 2023-08-08 21:06:39.352 debug UDP datagram from 192.168.178.101:7090: '{"State": 2}' kecontact.0 2023-08-08 21:06:36.098 debug UDP broadcast datagram from 192.168.178.101:7090: '{"Max curr": 6000}' kecontact.0 2023-08-08 21:06:36.098 debug UDP datagram from 192.168.178.101:7090: '{"Max curr": 6000}' kecontact.0 2023-08-08 21:06:35.758 debug History ID received: 00 kecontact.0 2023-08-08 21:06:35.757 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 196030 } ' kecontact.0 2023-08-08 21:06:35.756 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:35.457 debug Received TCH-OK :done kecontact.0 2023-08-08 21:06:35.457 debug UDP datagram from 192.168.178.101:7090: 'TCH-OK :done ' kecontact.0 2023-08-08 21:06:35.456 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:35.252 debug UDP broadcast datagram from 192.168.178.101:7090: '{"Enable sys": 1}' kecontact.0 2023-08-08 21:06:35.251 debug UDP datagram from 192.168.178.101:7090: '{"Enable sys": 1}' kecontact.0 2023-08-08 21:06:35.157 debug Received TCH-OK :done kecontact.0 2023-08-08 21:06:35.157 debug UDP datagram from 192.168.178.101:7090: 'TCH-OK :done ' kecontact.0 2023-08-08 21:06:35.155 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:34.869 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:06:34.869 debug not enough power for charging ... kecontact.0 2023-08-08 21:06:34.869 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:06:34.869 debug Available surplus: -634 kecontact.0 2023-08-08 21:06:34.856 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 196029 } ' kecontact.0 2023-08-08 21:06:34.855 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:34.555 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 196029 } ' kecontact.0 2023-08-08 21:06:34.554 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:20.156 debug History ID received: 00 kecontact.0 2023-08-08 21:06:20.156 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 196014 } ' kecontact.0 2023-08-08 21:06:20.155 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:19.868 debug Available surplus: -616 kecontact.0 2023-08-08 21:06:19.856 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 196014 } ' kecontact.0 2023-08-08 21:06:19.854 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:19.555 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 196014 } ' kecontact.0 2023-08-08 21:06:19.553 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:05.756 debug History ID received: 00 kecontact.0 2023-08-08 21:06:05.756 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 196000 } ' kecontact.0 2023-08-08 21:06:05.755 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:05.456 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:06:05.455 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:06:05.454 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:05.155 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:06:05.155 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:06:05.154 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:04.869 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:06:04.869 debug not enough power for charging ... kecontact.0 2023-08-08 21:06:04.869 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:06:04.868 debug Available surplus: -569 kecontact.0 2023-08-08 21:06:04.855 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195999 } ' kecontact.0 2023-08-08 21:06:04.853 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:06:04.555 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195999 } ' kecontact.0 2023-08-08 21:06:04.553 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:50.157 debug History ID received: 00 kecontact.0 2023-08-08 21:05:50.156 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195984 } ' kecontact.0 2023-08-08 21:05:50.154 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:49.866 debug Available surplus: -624 kecontact.0 2023-08-08 21:05:49.855 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195984 } ' kecontact.0 2023-08-08 21:05:49.854 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:49.555 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195984 } ' kecontact.0 2023-08-08 21:05:49.553 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:35.757 debug History ID received: 00 kecontact.0 2023-08-08 21:05:35.757 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195970 } ' kecontact.0 2023-08-08 21:05:35.756 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:35.457 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:05:35.456 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:05:35.455 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:35.155 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:05:35.155 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:05:35.154 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:34.867 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:05:34.867 debug not enough power for charging ... kecontact.0 2023-08-08 21:05:34.867 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:05:34.867 debug Available surplus: -591 kecontact.0 2023-08-08 21:05:34.855 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195969 } ' kecontact.0 2023-08-08 21:05:34.854 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:34.555 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195969 } ' kecontact.0 2023-08-08 21:05:34.554 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:20.156 debug History ID received: 00 kecontact.0 2023-08-08 21:05:20.156 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195954 } ' kecontact.0 2023-08-08 21:05:20.155 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:19.869 debug Available surplus: -602 kecontact.0 2023-08-08 21:05:19.855 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195954 } ' kecontact.0 2023-08-08 21:05:19.854 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:19.555 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195954 } ' kecontact.0 2023-08-08 21:05:19.553 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:05.756 debug History ID received: 00 kecontact.0 2023-08-08 21:05:05.756 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195940 } ' kecontact.0 2023-08-08 21:05:05.754 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:05.455 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:05:05.455 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:05:05.454 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:05.155 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:05:05.155 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:05:05.154 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:04.865 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:05:04.865 debug not enough power for charging ... kecontact.0 2023-08-08 21:05:04.865 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:05:04.865 debug Available surplus: -610 kecontact.0 2023-08-08 21:05:04.854 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195939 } ' kecontact.0 2023-08-08 21:05:04.854 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:05:04.555 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195939 } ' kecontact.0 2023-08-08 21:05:04.553 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:50.156 debug History ID received: 00 kecontact.0 2023-08-08 21:04:50.156 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195924 } ' kecontact.0 2023-08-08 21:04:50.154 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:49.864 debug Available surplus: -598 kecontact.0 2023-08-08 21:04:49.854 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195924 } ' kecontact.0 2023-08-08 21:04:49.853 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:49.554 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195924 } ' kecontact.0 2023-08-08 21:04:49.552 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:35.756 debug History ID received: 00 kecontact.0 2023-08-08 21:04:35.755 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195910 } ' kecontact.0 2023-08-08 21:04:35.754 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:35.454 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:04:35.454 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:04:35.453 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:35.153 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:04:35.153 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:04:35.152 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:34.864 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:04:34.864 debug not enough power for charging ... kecontact.0 2023-08-08 21:04:34.864 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:04:34.864 debug Available surplus: -570 kecontact.0 2023-08-08 21:04:34.853 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195909 } ' kecontact.0 2023-08-08 21:04:34.852 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:34.553 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195909 } ' kecontact.0 2023-08-08 21:04:34.552 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:20.155 debug History ID received: 00 kecontact.0 2023-08-08 21:04:20.155 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195894 } ' kecontact.0 2023-08-08 21:04:20.154 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:19.865 debug Available surplus: -621 kecontact.0 2023-08-08 21:04:19.854 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195894 } ' kecontact.0 2023-08-08 21:04:19.853 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:19.554 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195894 } ' kecontact.0 2023-08-08 21:04:19.552 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:05.753 debug History ID received: 00 kecontact.0 2023-08-08 21:04:05.753 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195880 } ' kecontact.0 2023-08-08 21:04:05.752 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:05.453 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:04:05.453 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:04:05.452 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:05.153 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:04:05.153 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:04:05.152 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:04.865 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:04:04.865 debug not enough power for charging ... kecontact.0 2023-08-08 21:04:04.865 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:04:04.864 debug Available surplus: -604 kecontact.0 2023-08-08 21:04:04.853 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195879 } ' kecontact.0 2023-08-08 21:04:04.852 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:04:04.552 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195879 } ' kecontact.0 2023-08-08 21:04:04.551 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:50.152 debug History ID received: 00 kecontact.0 2023-08-08 21:03:50.152 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195864 } ' kecontact.0 2023-08-08 21:03:50.151 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:49.862 debug Available surplus: -616 kecontact.0 2023-08-08 21:03:49.852 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195864 } ' kecontact.0 2023-08-08 21:03:49.851 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:49.552 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195864 } ' kecontact.0 2023-08-08 21:03:49.550 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:35.753 debug History ID received: 00 kecontact.0 2023-08-08 21:03:35.753 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195850 } ' kecontact.0 2023-08-08 21:03:35.751 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:35.453 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:03:35.453 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:03:35.452 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:35.152 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:03:35.152 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:03:35.151 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:34.864 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:03:34.864 debug not enough power for charging ... kecontact.0 2023-08-08 21:03:34.864 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:03:34.863 debug Available surplus: -625 kecontact.0 2023-08-08 21:03:34.852 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195849 } ' kecontact.0 2023-08-08 21:03:34.850 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:34.551 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195849 } ' kecontact.0 2023-08-08 21:03:34.550 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:20.152 debug History ID received: 00 kecontact.0 2023-08-08 21:03:20.152 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195834 } ' kecontact.0 2023-08-08 21:03:20.151 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:19.865 debug Available surplus: -610 kecontact.0 2023-08-08 21:03:19.852 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195834 } ' kecontact.0 2023-08-08 21:03:19.850 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:19.551 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195834 } ' kecontact.0 2023-08-08 21:03:19.550 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:05.753 debug History ID received: 00 kecontact.0 2023-08-08 21:03:05.753 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195820 } ' kecontact.0 2023-08-08 21:03:05.752 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:05.452 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:03:05.452 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:03:05.452 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:05.152 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:03:05.152 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:03:05.151 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:04.863 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:03:04.863 debug not enough power for charging ... kecontact.0 2023-08-08 21:03:04.863 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:03:04.862 debug Available surplus: -556 kecontact.0 2023-08-08 21:03:04.852 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195819 } ' kecontact.0 2023-08-08 21:03:04.850 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:03:04.551 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195819 } ' kecontact.0 2023-08-08 21:03:04.549 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:50.150 debug History ID received: 00 kecontact.0 2023-08-08 21:02:50.150 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195804 } ' kecontact.0 2023-08-08 21:02:50.149 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:49.861 debug Available surplus: -4810 kecontact.0 2023-08-08 21:02:49.849 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195804 } ' kecontact.0 2023-08-08 21:02:49.848 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:49.550 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195804 } ' kecontact.0 2023-08-08 21:02:49.548 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:39.743 debug UDP broadcast datagram from 192.168.178.101:7090: '{"Max curr": 0}' kecontact.0 2023-08-08 21:02:39.742 debug UDP datagram from 192.168.178.101:7090: '{"Max curr": 0}' kecontact.0 2023-08-08 21:02:39.625 debug UDP broadcast datagram from 192.168.178.101:7090: '{"State": 5}' kecontact.0 2023-08-08 21:02:39.625 debug UDP broadcast datagram from 192.168.178.101:7090: '{"Enable sys": 0}' kecontact.0 2023-08-08 21:02:39.625 debug UDP datagram from 192.168.178.101:7090: '{"State": 5}' kecontact.0 2023-08-08 21:02:39.624 debug UDP datagram from 192.168.178.101:7090: '{"Enable sys": 0}' kecontact.0 2023-08-08 21:02:39.158 debug History ID received: 00 kecontact.0 2023-08-08 21:02:39.158 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195793 } ' kecontact.0 2023-08-08 21:02:39.156 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:38.856 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:02:38.856 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:02:38.855 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:38.556 debug Received TCH-OK :done kecontact.0 2023-08-08 21:02:38.556 debug UDP datagram from 192.168.178.101:7090: 'TCH-OK :done ' kecontact.0 2023-08-08 21:02:38.555 debug Sent 'currtime 0 1' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:38.255 error Error received from wallbox: TCH-ERR:X2 : not allowed now kecontact.0 2023-08-08 21:02:38.255 debug UDP datagram from 192.168.178.101:7090: 'TCH-ERR:X2 : not allowed now ' kecontact.0 2023-08-08 21:02:38.254 debug Sent 'x2 0' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:37.971 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:02:37.971 info stop charging kecontact.0 2023-08-08 21:02:37.971 debug not enough power for charging ... kecontact.0 2023-08-08 21:02:37.970 info updating X2 for switch of phases from 1 to 0... kecontact.0 2023-08-08 21:02:37.970 debug Available surplus: -515 kecontact.0 2023-08-08 21:02:37.954 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 230, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195792 } ' kecontact.0 2023-08-08 21:02:37.953 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:37.659 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 1, "Max curr": 6000, "Max curr %": 100, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 6000, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195792 } ' kecontact.0 2023-08-08 21:02:37.653 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:37.653 info change pause status of wallbox from false to true kecontact.0 2023-08-08 21:02:35.150 debug History ID received: 00 kecontact.0 2023-08-08 21:02:35.150 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195789 } ' kecontact.0 2023-08-08 21:02:35.148 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:34.861 debug wallbox set to charging maximum of 6000 mA kecontact.0 2023-08-08 21:02:34.861 debug Available surplus: -522 kecontact.0 2023-08-08 21:02:34.849 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 230, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195789 } ' kecontact.0 2023-08-08 21:02:34.848 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:34.549 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 1, "Max curr": 6000, "Max curr %": 100, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 6000, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195789 } ' kecontact.0 2023-08-08 21:02:34.548 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:20.149 debug History ID received: 00 kecontact.0 2023-08-08 21:02:20.149 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195774 } ' kecontact.0 2023-08-08 21:02:20.147 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:19.862 debug Available surplus: -519 kecontact.0 2023-08-08 21:02:19.849 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 230, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195774 } ' kecontact.0 2023-08-08 21:02:19.848 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:19.550 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 1, "Max curr": 6000, "Max curr %": 100, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 6000, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195774 } ' kecontact.0 2023-08-08 21:02:19.548 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:05.150 debug History ID received: 00 kecontact.0 2023-08-08 21:02:05.150 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195759 } ' kecontact.0 2023-08-08 21:02:05.148 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:04.862 debug wallbox set to charging maximum of 6000 mA kecontact.0 2023-08-08 21:02:04.862 debug Available surplus: -509 kecontact.0 2023-08-08 21:02:04.849 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 230, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195759 } ' kecontact.0 2023-08-08 21:02:04.848 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:02:04.548 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 1, "Max curr": 6000, "Max curr %": 100, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 6000, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195759 } ' kecontact.0 2023-08-08 21:02:04.547 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:50.148 debug History ID received: 00 kecontact.0 2023-08-08 21:01:50.147 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195744 } ' kecontact.0 2023-08-08 21:01:50.146 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:49.863 debug Available surplus: -327 kecontact.0 2023-08-08 21:01:49.848 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 230, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195744 } ' kecontact.0 2023-08-08 21:01:49.847 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:49.547 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 1, "Max curr": 6000, "Max curr %": 100, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 6000, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195744 } ' kecontact.0 2023-08-08 21:01:49.546 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:35.148 debug History ID received: 00 kecontact.0 2023-08-08 21:01:35.148 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195729 } ' kecontact.0 2023-08-08 21:01:35.147 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:34.858 debug wallbox set to charging maximum of 6000 mA kecontact.0 2023-08-08 21:01:34.858 debug Available surplus: -363 kecontact.0 2023-08-08 21:01:34.847 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 230, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195729 } ' kecontact.0 2023-08-08 21:01:34.846 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:34.547 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 1, "Max curr": 6000, "Max curr %": 100, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 6000, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195729 } ' kecontact.0 2023-08-08 21:01:34.545 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:20.149 debug History ID received: 00 kecontact.0 2023-08-08 21:01:20.148 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195714 } ' kecontact.0 2023-08-08 21:01:20.146 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:19.859 debug Available surplus: 3488 kecontact.0 2023-08-08 21:01:19.858 info vehicle (re)starts to charge kecontact.0 2023-08-08 21:01:19.847 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 230, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195714 } ' kecontact.0 2023-08-08 21:01:19.845 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:19.545 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 3, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 1, "Enable user": 1, "Max curr": 6000, "Max curr %": 100, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 6000, "Tmo CT": 0, "Setenergy": 0, "Output": 1, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 1, "Serial": "23272616", "Sec": 195714 } ' kecontact.0 2023-08-08 21:01:19.544 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:14.124 debug UDP broadcast datagram from 192.168.178.101:7090: '{"State": 3}' kecontact.0 2023-08-08 21:01:14.124 debug UDP datagram from 192.168.178.101:7090: '{"State": 3}' kecontact.0 2023-08-08 21:01:10.520 debug UDP broadcast datagram from 192.168.178.101:7090: '{"State": 2}' kecontact.0 2023-08-08 21:01:10.519 debug UDP datagram from 192.168.178.101:7090: '{"State": 2}' kecontact.0 2023-08-08 21:01:07.271 debug UDP broadcast datagram from 192.168.178.101:7090: '{"Max curr": 6000}' kecontact.0 2023-08-08 21:01:07.271 debug UDP datagram from 192.168.178.101:7090: '{"Max curr": 6000}' kecontact.0 2023-08-08 21:01:06.646 debug History ID received: 00 kecontact.0 2023-08-08 21:01:06.646 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195701 } ' kecontact.0 2023-08-08 21:01:06.644 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:06.355 debug UDP broadcast datagram from 192.168.178.101:7090: '{"Enable sys": 1}' kecontact.0 2023-08-08 21:01:06.354 debug UDP datagram from 192.168.178.101:7090: '{"Enable sys": 1}' kecontact.0 2023-08-08 21:01:06.345 debug Received TCH-OK :done kecontact.0 2023-08-08 21:01:06.344 debug UDP datagram from 192.168.178.101:7090: 'TCH-OK :done ' kecontact.0 2023-08-08 21:01:06.344 debug Sent 'x2 1' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:06.045 debug Received TCH-OK :done kecontact.0 2023-08-08 21:01:06.045 debug UDP datagram from 192.168.178.101:7090: 'TCH-OK :done ' kecontact.0 2023-08-08 21:01:06.044 debug Sent 'currtime 6000 1' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:05.759 info (re)start charging kecontact.0 2023-08-08 21:01:05.759 debug wallbox set to charging maximum of 6000 mA kecontact.0 2023-08-08 21:01:05.759 info updating X2 for switch of phases from 0 to 1... kecontact.0 2023-08-08 21:01:05.759 debug Available surplus: -612 kecontact.0 2023-08-08 21:01:05.745 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "3", "U1": 0, "U2": 0, "U3": 0, "I1": 0, "I2": 0, "I3": 0, "P": 0, "PF": 0, "E pres": 0, "E total": 0, "Serial": "23272616", "Sec": 195700 } ' kecontact.0 2023-08-08 21:01:05.744 debug Sent 'report 3' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:05.445 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "2", "State": 5, "Error1": 0, "Error2": 0, "Plug": 7, "AuthON": 0, "Authreq": 0, "Enable sys": 0, "Enable user": 0, "Max curr": 0, "Max curr %": 1000, "Curr HW": 16000, "Curr user": 6000, "Curr FS": 0, "Tmo FS": 0, "Curr timer": 0, "Tmo CT": 0, "Setenergy": 0, "Output": 0, "Input": 0, "X2 phaseSwitch source": 4, "X2 phaseSwitch": 0, "Serial": "23272616", "Sec": 195700 } ' kecontact.0 2023-08-08 21:01:05.444 debug Sent 'report 2' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:05.145 debug History ID received: 00 kecontact.0 2023-08-08 21:01:05.145 debug UDP datagram from 192.168.178.101:7090: '{ "ID": "100", "Session ID": 49, "Curr HW": 16000, "E start": 0, "E pres": 0, "started[s]": 1691519327, "ended[s]": 0, "started": "2023-08-08 18:28:47.000", "ended": "0", "reason": 5, "timeQ": 0, "RFID tag": "0000000000000000", "RFID class": "00000000000000000000", "Serial": "23272616", "Sec": 195699 } ' kecontact.0 2023-08-08 21:01:05.144 debug Sent 'report 100' to 192.168.178.101:7090 kecontact.0 2023-08-08 21:01:05.018 info change pause status of wallbox from true to false -
@christian-kohlöffel Hm, also "pause" wird nicht genutzt, um den Ladevorgang bei der Phasenumschaltung zu stoppen. Das ist etwas, das Du manuell über den State anstößt und dann vom Adapter interpretiert und mit currtime 0 1 an die Wallox gesendet wird.
Warum das X2-Kommando nicht akzeptiert wird, müsstest Du vielleicht mal bei Keba anfragen.
Mir ist auch nicht klar, warum die Box anfängt zu laden, wenn der Überschuss nur -612W sein soll. Später ist er dann aber plötzlich +3.488W.
Hast Du "Schließer (is normally open/NO)" eingestellt und hast vielleicht einen Öffner?
Oder wird die Leistung der Wallbox im Überschuss mit einberechnet?So ganz komme ich gerade leider nicht mit, was da genau passiert...
-
@sneak-l8 Damit bei mir der Umschaltbefehl für X2 akzeptiert wird, muss ich in der WebUi der Wallbox den Kommunikationskanal für den X2 auf "UDP" stellen!
-
@opaw das sollte der Adapter beim Start automatisch machen
-
@sneak-l8 Ok, Der Adapter ist bei mir im Passiv Modus, das wäre eine Erklärung das der State X2 nicht über den Adapter umschaltbar ist.
Ich habe nun passiv abgewählt. Trotzdem ist der State vom Adapter aus nicht zu verändern. Nach kurzer Zeit springt der Wert wieder von 4 für UDP wieder auf 1. Bei mir eingestellter Wert für Steuerung durch Wallbox im der WebUi. Auch ein Neustart des Adapters brachte keine Veränderung.
Zusätzlicher Hinweis: Unter Modbus verhält sich die P30X auch so.
-
@opaw Die X-series hat ja ihre eigene Steuerung. Der Adapter stellt den Modus zwar um, die Keba ist aber wohl so konfiguriert, dass sie weiter auf den anderen Modus umstellt. Vermutlich weil sie selbst aktiv steuern will.
Es können aber nicht zwei Systeme aktiv steuern wollen.
Da musst Du wohl in der Konfiguration für die Keba nachlesen und Dich für eine Seite entscheiden, die aktiv sein soll -
@sneak-l8 Das ist mir zwischenzeitlich klar, ich kann die P30X so über die WebUi einstellen um entweder über die eingebaute Software, oder Deinem Adapter, oder Modbus zu steuern. Mein Favorit ist zur Zeit Dein UDP Adapter im passiven Modus. Auf diesen greife ich mit einem eigenen Steuerprogramm bezüglich "PV optimiertem Laden mit Hausbatterie" zu. Die Modbus Schnittstelle von Keba ist schlecht gemacht. Die notwendigen beschreibbaren Register liefern keine Statusmeldungen.
Bis ich alles durchgetestet habe, lasse ich die Wallbox im normalen Betrieb mit der internen Software agieren. Ist offenbar z.Z die PV optimierteste Lösung. Meine Frau, Kinder stecken den Stecker ins Auto, und alles läuft. Ich muß dann nur manuell hinschauen, dass die für die Nacht vorgesehene Hausbatterie nicht Zweckentfremdet wird.
Ich habe parallel nach einer Lösung über Keba (Kontaktformular) gesucht. Ich komme dabei aber nicht an eine Fachkraft und werde mit technisch unsinnigen Antworten abgespeist.
-
@sneak-l8 , ich hab mir das alles nochmals genauer angeschaut und habe versucht das schalten des X2 Ausgangs mittels einen neu eingeführten Timers umzusetzen und somit den mindest Zeitabstand einzuhalten. Hierzu habe ich dein aktuelles Repository geforked, einen dev-server aufgesetzt und im programmieren versucht. Wäre schön wenn du Dir das mal anschauen könntest und wenn es für Dich auch einen Sinn ergibt bei Dir integriert werden könnte. In meinen ersten Test heute hat es schon mal einige Fehlermeldungen beheben können. Inputs Deiner Seite sind auch gerne wilkommen
@sneak-l8 sagte in [Frage] Realisierung Adapter UDP Keba Wallbox:
Warum das X2-Kommando nicht akzeptiert wird, müsstest Du vielleicht mal bei Keba anfragen.
Ich habe dazu einen Thread bei einem der anderen Adapter zur KEBA gefunden, schein am implementierten Verhalten in der KEBA zu legen. Nachdem ich ein wenig an den Bedingungen rum gebastelt habe, wie im Log nachzulesen habe ich es geschafft, dass die Box wieder das laden selbständig beendet, wenn das der Fall ist.
Hier der Link zum Post: https://www.loxforum.com/forum/hardware-zubehör-sensorik/77402-keba-wallbox?p=398742#post398742In der Anleitung hab ich zufällig gefunden dass es tatsächlich die 300s sind welche implementiert sind.
-
@christian-kohlöffel
Hallo ich bin an der gleichen Baustelle. Dar x2 Schaltbefehl funktionier bei mir in dem Moment wenn ich in der Webui (P30X) auf UDP umgestaltet hab. Ein Umschalten des State X2phaseSource über den Adapter funktioniert nicht. Der Adapter springt nach kurzer Zeit wieder auf den alten Wert zurück.Ich habe Keba angeschrieben und bezüglich der Beeinflussung interne und externer Steuerungslogik folgende Antwort erhalten:
vielen Dank für Ihre Anfrage bezüglich des PV-optimierten Ladevorgangs Ihrer KEBA P30 PV Edition.
Wenn Sie die PV-optimierte Ladesteuerung über eine externe Steuerung realisieren möchten und die interne Steuerung der KEBA P30 deaktivieren wollen, müssen Sie dies nicht explizit abschalten. Die externe Steuerung hat Vorrang und überschreibt die internen Einstellungen der Ladestation.
Sie können die externe Steuerung, sei es über ein Energiemanagementsystem oder eine andere Lösung, so konfigurieren, dass sie den Ladeprozess basierend auf dem PV-Überschuss optimiert. Die KEBA P30 Wallbox wird dann entsprechend gesteuert, ohne dass Sie manuelle Einstellungen an der internen Steuerung vornehmen müssen.
Bitte stellen Sie sicher, dass die externe Steuerung korrekt eingerichtet ist, um den gewünschten PV-optimierten Ladevorgang zu ermöglichen.
Die Aussage hört sich erstmal sehr gut an. Überschreiben ist simpelster kämpfen hier nicht zwei Regelsysteme gegeneinander? Auch meine zwischenzeitlichen Erfahrungen können diese Aussage nicht bestätigen. Ich hab die interne Steuerung für die PV optimierte Steuerung abgeschaltet und experimentiere weiter..
-
@opaw , leider hab ich nur die DE Edition, welche keine internen Features wie Strom und Spannungsmessungen hat. Aber ich muss sagen, der Adapter von sneak funktioniert bei der PV Regelung und der Schaltung meist wie er soll, also wenn Du es schaffst das Eigenverhalten der Box abzustellen, dann hast du gute Chancen damit eine gute PV Abhängige Regelung hin zu bekommen.
@opaw sagte in [Frage] Realisierung Adapter UDP Keba Wallbox:
Dar x2 Schaltbefehl funktionier bei mir in dem Moment wenn ich in der Webui (P30X) auf UDP umgestaltet hab
Ohne UDP kanns ja nicht funktionieren, da der Adapter zur Kommunikation UDP verwendet, oder?
@opaw sagte in [Frage] Realisierung Adapter UDP Keba Wallbox:
Ein Umschalten des State X2phaseSource über den Adapter funktioniert nicht. Der Adapter springt nach kurzer Zeit wieder auf den alten Wert zurück.
Bist du schon im Active Mode im Adapter, normal dürfte er für min. 300s nicht zurückschalten können wenn er mal gesetzt ist. Was sagt er im Log dazu?
-
@christian-kohlöffel Danke für den Fork.
Ich hätte jetzt keine Config-Option für den Timeout zum Umschalten 1p/3p gemacht, da der wohl für alle Boxen gleich sein dürfte. Und wenn nicht, dann könnte man das auch je Modell einstellen, die Erkennung ist ja schon da.
Gnauer habe ich es noch nicht angeschaut, bin noch eine Weile unterwegs ... -
@sneak-l8 sagte in [Frage] Realisierung Adapter UDP Keba Wallbox:
Ich hätte jetzt keine Config-Option für den Timeout zum Umschalten 1p/3p gemacht, da der wohl für alle Boxen gleich sein dürfte
Ja, da hast du wohl recht. Aber am Anfang war mir das noch nicht klar. Vielleicht macht es ja Sinn diese drin zu lassen um das hin und her schalten bei nicht S10 basierten Systemen zu verzögern? Aber ob das variabel sein muss ist fraglich.
Mal schauen, vielleicht baue ich es ja wieder raus, wenn das Wetter die nächsten Tage so bleibtUpdate, es ging doch sehr schnell:
https://github.com/iobroker-community-adapters/ioBroker.kecontact/compare/master...christi-ko:ioBroker.kecontact:master -
@christian-kohlöffel Sorry, sehe nicht ,dass es zurückgebaut wäre auf einen festen Wert. Konfig ist immer noch drin, oder? Letzter Commit ist vom 11. August. Evtl. Push vergessen?
-
@sneak-l8 Ich hab da mal eine Pull request gemacht. Dort sollte es drin sein ...
https://github.com/iobroker-community-adapters/ioBroker.kecontact/pulls -
@christian-kohlöffel Ne, da ist leider auch noch die Konfig erweitert.
-
@sneak-l8 Gibts doch nicht. Ich habe es hier Committet, oder?
-
@Sneak-L8 Ich will jetzt nicht meine Hand ins Feuer dafür legen, vielleicht hab ich es ja auch irgendwo vergessen und nicht in allen files raus genommen. Ist ja doch irgendwie an vielen Stellen nötig gewesen rein zu bauen ...
-
@christian-kohlöffel Ich glaube, ich verstehe jetzt.
Ich hab erstmal falsch geschaut. Im PR stehen die ältesten Commits oben, hatte den neusten erwartet. Die Änderung sind also doch da.
Aber Du hast nicht alles zurückgenommen. Z.B. .create-adapter.json enthält noch den neuen Wert und in den Translations ist es auch noch alles drin.Danach wäre es eigentlich optimimal, wenn Du Deine Commits zu einem zusammen-squashst. (Das hab ich selbst aber noch nicht gemacht, weil ich mit VSC noch nicht so recht weiß, wo). Aber das ist nicht ganz so wild, beim PR sieht man ja die "overall"-Änderung und sieht dann, dass nur weniges Stellen geändert wurden.
-
@sneak-l8 Ich hab die Änderung gerade noch in create-adapter.json gemacht. Sonst habe ich glaub alles Stellen erwischt. Bezüglich squashsen hab ich nachgelesen. Das kann man wohl direkt in GIT beim Pull Request Mergen als Option ankreuzen (https://www.git-tower.com/learn/git/faq/git-squash) .
