UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[Ein ehemaliger Benutzer]

@arteck sagte in ZigBee neue Version 1.8.x:

@ilovegym nimm die 1.8.3.. in der 1.8.5 stimmt noch was nicht

yes, die 1.8.3 laeuft ohne Fehler hier.
Wenn du n Debug log von irgenwas brauchst, sag bescheid, hab ne recht hohe Anzahl an Geraeten.. diesmal sind auch alle Icons richtig und das Assignment stimmt wieder.
:+1: :+1:

[Kueppert]

@ilovegym jo, bei mir in der 1.8.3 sind die Geräte-Bildchen auch wieder korrekt, war bei der 1.8.5 nämlich nicht der Fall :) Mir noch garnicht aufgefallen, weil ich noch nicht nachgesehen hatte ^^

[arteck]

so neue version ist unterwegs.. 1.8.7 da sollte wieder alles tun

[rotamint]

@arteck

Danke für Deine Mühe, ist das in 1.8.7 auch (wieder) gefixt und ... wie komme ich an die 1.8.7 ran zur Installation?

DANKE! LG. S.

[Thomas Braun]

@rotamint sagte in ZigBee neue Version 1.8.x:

wie komme ich an die 1.8.7 ran zur Installation?

So wie du auch an die 1.8.5 gekommen bist? Willkommen im Beta-Bereich, wo die Versionen noch Ecken und Kanten haben dürfen.

[rotamint]

@thomas-braun Leider nicht...
Aber darum treffen wir uns ja im Beta-Bereich, um die Ecken und Kanten noch rund zu bekommen :+1:

[Thomas Braun]

@rotamint

Die 1.8.7 muss ja auch erst im Repo eingecheckt werden. Passiert alle 12 Stunden, um 2 und 14 Uhr, soweit ich weiß. Morgen früh ist es dann gesynct.

[arteck]

@rotamint oder so
https://github.com/ioBroker/ioBroker.zigbee/wiki/GIT-install

[rotamint]

@thomas-braun Wieder was dazu gelernt. Danke!

[rotamint]

@arteck Danke für's Lösungsweg aufzeigen! Hat geklappt und FB20-002 funktioniert auch wieder. :+1:

[spotterblog]

1.8.7 läuft soweit.
Firmware Updates haben jetzt auch funktioniert.

Lediglich meine Steckdosenleiste hat leider in der neuen Version immer noch keinen vollen Support.

Nach dem Starten kommt immer dieser Fehler:

DeviceConfigure:Failed to DeviceConfigure.configure 0x70b3d52b60012015 TS011F (Error: Read 0x70b3d52b60012015/1 genBasic(["manufacturerName","zclVersion","appVersion","modelId","powerSource",65534], {"sendWhen":"immediate","timeout":10000,"disableResponse":false,"disableRecovery":false,"disableDefaultResponse":true,"direction":0,"srcEndpoint":null,"reservedBits":0,"manufacturerCode":null,"transactionSequenceNumber":null,"writeUndiv":false}) failed (no response received) at DeconzAdapter.sendZclFrameToEndpoint (/opt/iobroker/node_modules/zigbee-herdsman/src/adapter/deconz/adapter/deconzAdapter.ts:658:23) at Endpoint.sendRequest (/opt/iobroker/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:299:20) at Endpoint.read (/opt/iobroker/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:472:28) at Object.configureMagicPacket (/opt/iobroker/node_modules/zigbee-herdsman-converters/lib/tuya.js:1179:9) at Object.configure (/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/useelink.js:36:13) at DeviceConfigure.doConfigure (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:134:13) at DeviceConfigure.configure (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:112:17) at DeviceConfigure.onZigbeeStarted (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:54:21) at async Promise.all (index 1))

Dann alle 5min dieser:

DeviceConfigure:Failed to DeviceConfigure.configure 0x70b3d52b60012015 TS011F (TypeError: Cannot read properties of undefined (reading 'debug') at Object.configureMagicPacket (/opt/iobroker/node_modules/zigbee-herdsman-converters/lib/tuya.js:1184:20) at Object.configure (/opt/iobroker/node_modules/zigbee-herdsman-converters/devices/useelink.js:36:13) at DeviceConfigure.doConfigure (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:134:13) at DeviceConfigure.configure (/opt/iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:112:17))

[amg_666]

Also ich hab jetzt über github die 1.8.7 installiert.
Adapter ist grün, scheint auch zu funktionieren, aber im Log habe ich jede Menge Warnungen:

zigbee.0
	2022-12-01 23:32:10.003	warn	DeviceAvailability:Failed to ping 0x00124b00235279d6 ZB-CL01
zigbee.0
	2022-12-01 23:32:09.356	warn	DeviceAvailability:Failed to ping 0x00124b00234ca487 ZB-CL01
zigbee.0
	2022-12-01 23:31:46.707	warn	This object will not be created in future versions. Please report this to the developer.
zigbee.0
	2022-12-01 23:31:46.707	warn	Object zigbee.0.84fd27fffecf6567.indicator_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"
zigbee.0
	2022-12-01 23:31:46.702	warn	This object will not be created in future versions. Please report this to the developer.
zigbee.0
	2022-12-01 23:31:46.701	warn	Object zigbee.0.84fd27fffecf6567.power_outage_memory is invalid: obj.common.states has an invalid type! Expected "object", received "string"
zigbee.0
	2022-12-01 23:31:46.534	warn	This object will not be created in future versions. Please report this to the developer.
zigbee.0
	2022-12-01 23:31:46.533	warn	Object 84fd27fffecf6567.indicator_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"
zigbee.0
	2022-12-01 23:31:46.532	warn	This object will not be created in future versions. Please report this to the developer.
zigbee.0
	2022-12-01 23:31:46.531	warn	Object 84fd27fffecf6567.power_outage_memory is invalid: obj.common.states has an invalid type! Expected "object", received "string"
zigbee.0
	2022-12-01 23:31:45.404	warn	download icon from https://www.zigbee2mqtt.io/images/devices/TS011F_plug_1.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS011F_plug_1.png
zigbee.0
	2022-12-01 23:31:45.401	warn	download icon from https://www.zigbee2mqtt.io/images/devices/TS011F_plug_1.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS011F_plug_1.png
zigbee.0
	2022-12-01 23:31:45.398	warn	download icon from https://www.zigbee2mqtt.io/images/devices/ZB-RGBCW.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZB-RGBCW.png
zigbee.0
	2022-12-01 23:31:45.395	warn	download icon from https://www.zigbee2mqtt.io/images/devices/ZB-RGBCW.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZB-RGBCW.png
zigbee.0
	2022-12-01 23:31:45.389	warn	download icon from https://www.zigbee2mqtt.io/images/devices/TS011F_plug_3.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS011F_plug_3.png
zigbee.0
	2022-12-01 23:31:45.386	warn	download icon from https://www.zigbee2mqtt.io/images/devices/TS011F_plug_3.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS011F_plug_3.png
zigbee.0
	2022-12-01 23:31:45.383	warn	download icon from https://www.zigbee2mqtt.io/images/devices/TS011F_plug_1.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/TS011F_plug_1.png
zigbee.0
	2022-12-01 23:31:45.380	warn	download icon from https://www.zigbee2mqtt.io/images/devices/MCCGQ14LM.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/MCCGQ14LM.png
zigbee.0
	2022-12-01 23:31:45.375	warn	download icon from https://www.zigbee2mqtt.io/images/devices/MCCGQ14LM.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/MCCGQ14LM.png
zigbee.0
	2022-12-01 23:31:45.353	warn	download icon from https://www.zigbee2mqtt.io/images/devices/ZB-RGBCW.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZB-RGBCW.png
zigbee.0
	2022-12-01 23:31:45.350	warn	download icon from https://www.zigbee2mqtt.io/images/devices/ZB-RGBCW.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZB-RGBCW.png
zigbee.0
	2022-12-01 23:31:45.347	warn	download icon from https://www.zigbee2mqtt.io/images/devices/ZB-RGBCW.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/ZB-RGBCW.png
zigbee.0
	2022-12-01 23:31:45.326	warn	download icon from https://www.zigbee2mqtt.io/images/devices/MCCGQ14LM.jpg saved into /opt/iobroker/node_modules/iobroker.zigbee/admin/img/MCCGQ14LM.png
zigbee.0
	2022-12-01 23:31:45.312	info	Zigbee started

[spotterblog]

Habe gerade zwei Aqara Wandschalter neu eingebunden.
Bekomme direkt nach dem Einbinden ebenfalls Warnungen:

zigbee.0
2022-12-01 23:15:51.986	info	DeviceConfigure successful 0x54ef44100044c675 lumi.remote.b28ac1

zigbee.0
2022-12-01 23:15:46.436	warn	This object will not be created in future versions. Please report this to the developer.

zigbee.0
2022-12-01 23:15:46.435	warn	Object zigbee.0.54ef44100044c675.operation_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"

zigbee.0
2022-12-01 23:15:46.420	warn	This object will not be created in future versions. Please report this to the developer.

zigbee.0
2022-12-01 23:15:46.419	warn	Object zigbee.0.54ef44100044c675.click_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"

zigbee.0
2022-12-01 23:15:46.410	warn	This object will not be created in future versions. Please report this to the developer.

zigbee.0
2022-12-01 23:15:46.410	warn	Object 54ef44100044c675.operation_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"

zigbee.0
2022-12-01 23:15:46.409	warn	This object will not be created in future versions. Please report this to the developer.

zigbee.0
2022-12-01 23:15:46.409	warn	Object 54ef44100044c675.click_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"

zigbee.0
2022-12-01 23:15:46.302	info	Configuring 0x54ef44100044c675 lumi.remote.b28ac1

zigbee.0
2022-12-01 23:15:46.298	info	Device '0x54ef44100044c675' is supported, identified as: Xiaomi Aqara wireless remote switch H1 (double rocker) (WXKG15LM)

zigbee.0
2022-12-01 23:15:46.297	info	Successfully interviewed '0x54ef44100044c675', device has successfully been paired

zigbee.0
2022-12-01 23:15:37.480	info	Starting interview of '0x54ef44100044c675'

zigbee.0
2022-12-01 22:44:29.336	info	DeviceConfigure successful 0x54ef44100044c6af lumi.remote.b28ac1

zigbee.0
2022-12-01 22:44:23.092	warn	This object will not be created in future versions. Please report this to the developer.

zigbee.0
2022-12-01 22:44:23.092	warn	Object zigbee.0.54ef44100044c6af.operation_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"

zigbee.0
2022-12-01 22:44:23.084	warn	This object will not be created in future versions. Please report this to the developer.

zigbee.0
2022-12-01 22:44:23.084	warn	Object zigbee.0.54ef44100044c6af.click_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"

zigbee.0
2022-12-01 22:44:23.075	warn	This object will not be created in future versions. Please report this to the developer.

zigbee.0
2022-12-01 22:44:23.074	warn	Object 54ef44100044c6af.operation_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"

zigbee.0
2022-12-01 22:44:23.074	warn	This object will not be created in future versions. Please report this to the developer.

zigbee.0
2022-12-01 22:44:23.073	warn	Object 54ef44100044c6af.click_mode is invalid: obj.common.states has an invalid type! Expected "object", received "string"

zigbee.0
2022-12-01 22:44:22.998	info	Configuring 0x54ef44100044c6af lumi.remote.b28ac1

zigbee.0
2022-12-01 22:44:22.997	info	Device '0x54ef44100044c6af' is supported, identified as: Xiaomi Aqara wireless remote switch H1 (double rocker) (WXKG15LM)

zigbee.0
2022-12-01 22:44:22.997	info	Successfully interviewed '0x54ef44100044c6af', device has successfully been paired

zigbee.0
2022-12-01 22:44:08.708	info	Starting interview of '0x54ef44100044c6af'

[arteck]

@amg_666 sagte in ZigBee neue Version 1.8.x:

84fd27fffecf6567

zeig mal die Datenpunkte von dem und die Kachel mit der Infoseite
für den Rest hier
https://github.com/ioBroker/ioBroker.zigbee/wiki/Missing-icons-after-adatapter-Update

@spotterblog

54ef44100044c6af

von dem auch Kachel und die Infoseite

[arteck]

@spotterblog sagte in ZigBee neue Version 1.8.x:

iobroker/node_modules/iobroker.zigbee/lib/zbDeviceConfigure.js:112:17))

am conbee ?? dann mach erst ein firmwareupdate von dem Teil

[legro]

@arteck said in ZigBee neue Version 1.8.x:

es ist mal wieder eine neue Version da..

diesmal hat sich nicht viel getan..

Heißt das auch, dass hinsichtlich der BITRON-Sirenen sich nichts getan hat? :confused: Dort funktioniert die Konfiguration der Geräte payload ja nicht mehr richtig.

[arteck]

@legro schau im chanege log..

ich war an der Sirene nicht dran

[Ein ehemaliger Benutzer]

@arteck 1.8.7 ohne Mucken im Log, super, Danke!
Statesmapping auch wieder komplett richtig da.

[Pap]

1.8.7 läuft nicht. Sämtliche Silvercrast Steckdosenleisten werden als Steckdose angezeigt und lassen sich nicht mehr steuern.

[arteck]

@pap das ist schön..ich hol mal die Glaskugel