js-controller lässt sich nicht updaten...

DJMarc75

@mr-burns strech ... buster... alles nicht aktuell !

Thomas Braun

@mr-burns

sudo apt install libopenzwave1.5-dev

Und pass das influx-Repo an.

Mr. Burns

@thomas-braun hat was gedauert. Nach dem update war der raspi nicht mehr erreichbar und es hat ein paar Tage gedauert, bis der micro HDMI adapter angekommen ist.

Netzwerkkarte wieder aktiviert, System läuft wieder aber leider funktioniert es immer noch nicht:

sudo apt install libopenzwave1.5-dev
Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
E: Paket libopenzwave1.5-dev kann nicht gefunden werden.
E: Mittels des Musters »libopenzwave1.5-dev« konnte kein Paket gefunden werden.

Thomas Braun

@mr-burns
Okay, was wird denn da bei dir dann angeboten?

sudo apt update
apt policy libopenzwave*

Mr. Burns

@thomas-braun Das bekomme ich zurück:

sudo apt update
apt policy libopenzwave*
OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
OK:2 http://archive.raspberrypi.org/debian bullseye InRelease                                                                                                             
OK:3 https://repos.influxdata.com/debian bullseye InRelease                                                                                                               
OK:4 https://deb.nodesource.com/node_16.x bullseye InRelease                                                                                      
OK:5 https://phoscon.de/apt/deconz bullseye InRelease                
Paketlisten werden gelesen… Fertig           
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
Aktualisierung für 4 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen.
libopenzwave1.6-dev:
 Installiert:           (keine)
 Installationskandidat: 1.6.1545+ds-2
 Versionstabelle:
    1.6.1545+ds-2 500
       500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
libopenzwave1.5:
 Installiert:           1.5+ds-6
 Installationskandidat: 1.5+ds-6
 Versionstabelle:
*** 1.5+ds-6 100
       100 /var/lib/dpkg/status
libopenzwave1.6:
 Installiert:           (keine)
 Installationskandidat: 1.6.1545+ds-2
 Versionstabelle:
    1.6.1545+ds-2 500
       500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
libopenzwave-doc:
 Installiert:           (keine)
 Installationskandidat: 1.6.1545+ds-2
 Versionstabelle:
    1.6.1545+ds-2 500
       500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Mr. Burns

@thomas-braun

Ich hab mal die v1.6 installiert. Leider kann der js-controller immer noch nicht aktualisiert werden...

iobroker upgrade self --debug
Update js-controller from @4.0.21 to @4.0.23
Stopped Objects DB
Stopped States DB
NPM version: 8.19.2
Installing iobroker.js-controller@4.0.23... (System call)
npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies.
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated appdirectory@0.1.0: Package no longer supported. Contact Support at https://www.npmjs.com/support for more info.
npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained.
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/pcap
npm ERR! command failed
npm ERR! command sh -c -- node-gyp rebuild
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/pcap/build“ wird betreten
npm ERR!   CXX(target) Release/obj.target/pcap_binding/pcap_binding.o
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/pcap/build“ wird verlassen
npm ERR! gyp info it worked if it ends with ok
npm ERR! gyp info using node-gyp@9.1.0
npm ERR! gyp info using node@16.17.1 | linux | arm
npm ERR! gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
npm ERR! gyp info spawn /usr/bin/python3
npm ERR! gyp info spawn args [
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
npm ERR! gyp info spawn args   'binding.gyp',
npm ERR! gyp info spawn args   '-f',
npm ERR! gyp info spawn args   'make',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/opt/iobroker/node_modules/pcap/build/config.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/home/iobroker/.cache/node-gyp/16.17.1/include/node/common.gypi',
npm ERR! gyp info spawn args   '-Dlibrary=shared_library',
npm ERR! gyp info spawn args   '-Dvisibility=default',
npm ERR! gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/16.17.1',
npm ERR! gyp info spawn args   '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
npm ERR! gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/16.17.1/<(target_arch)/node.lib',
npm ERR! gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/pcap',
npm ERR! gyp info spawn args   '-Dnode_engine=v8',
npm ERR! gyp info spawn args   '--depth=.',
npm ERR! gyp info spawn args   '--no-parallel',
npm ERR! gyp info spawn args   '--generator-output',
npm ERR! gyp info spawn args   'build',
npm ERR! gyp info spawn args   '-Goutput_dir=.'
npm ERR! gyp info spawn args ]
npm ERR! gyp info spawn make
npm ERR! gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
npm ERR! ../pcap_binding.cc:2:10: fatal error: pcap/pcap.h: Datei oder Verzeichnis nicht gefunden
npm ERR!     2 | #include <pcap/pcap.h>
npm ERR!       |          ^~~~~~~~~~~~~
npm ERR! compilation terminated.
npm ERR! make: *** [pcap_binding.target.mk:112: Release/obj.target/pcap_binding/pcap_binding.o] Fehler 1
npm ERR! gyp ERR! build error 
npm ERR! gyp ERR! stack Error: `make` failed with exit code: 2
npm ERR! gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:201:23)
npm ERR! gyp ERR! stack     at ChildProcess.emit (node:events:513:28)
npm ERR! gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:291:12)
npm ERR! gyp ERR! System Linux 5.15.61-v7l+
npm ERR! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/pcap
npm ERR! gyp ERR! node -v v16.17.1
npm ERR! gyp ERR! node-gyp -v v9.1.0
npm ERR! gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-09-30T15_32_29_851Z-debug-0.log
``
[/s]

Thomas Braun

@mr-burns

sudo apt install libpcap0.8-dev

Und was genau hast du da jetzt installiert?

sudo apt update
apt policy libopenzwave*

Mr. Burns

@thomas-braun

sudo apt-get install libopenzwave1.6-dev

Thomas Braun

@mr-burns

apt policy libopenzwave*

Ausgaben zeigen...

Mr. Burns

@thomas-braun

apt policy libopenzwave*
libopenzwave1.6-dev:
  Installiert:           1.6.1545+ds-2
  Installationskandidat: 1.6.1545+ds-2
  Versionstabelle:
 *** 1.6.1545+ds-2 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
        100 /var/lib/dpkg/status
libopenzwave1.5:
  Installiert:           (keine)
  Installationskandidat: (keine)
  Versionstabelle:
     1.5+ds-6 -1
        100 /var/lib/dpkg/status
libopenzwave1.6:
  Installiert:           1.6.1545+ds-2
  Installationskandidat: 1.6.1545+ds-2
  Versionstabelle:
 *** 1.6.1545+ds-2 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
        100 /var/lib/dpkg/status
libopenzwave-doc:
  Installiert:           (keine)
  Installationskandidat: 1.6.1545+ds-2
  Versionstabelle:
     1.6.1545+ds-2 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages

Thomas Braun

@mr-burns

libopenzwave sollte passen. Die libpcap0.8-dev ist auch installiert?

DJMarc75

@mr-burns sagte in js-controller lässt sich nicht updaten...:

NPM version: 8.19.2

Seh ich das richtig dass da immer noch was krumm ist ?

Mr. Burns

@thomas-braun ja, ist installiert. versuche gerade noch einmal...

Mr. Burns

@djmarc75 das kann ich nicht beantworten. Aber im iobroker gehen 2 wichtige adapter nicht:#
s7 und javascript...aber vielleicht mit dem update welches ich gerade durchgeführt habe.

Thomas Braun

@djmarc75 sagte in js-controller lässt sich nicht updaten...:

Seh ich das richtig dass da immer noch was krumm ist ?

Siehst du richtig.

@Mr-Burns

sudo ln -s /usr/bin/node /usr/bin/nodejs
uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs

Mr. Burns

@thomas-braun

Das Ergebnis des update Versuchs vor dem neuen update:

iobroker upgrade self --debug
Update js-controller from @4.0.21 to @4.0.23
Stopped Objects DB
Stopped States DB
NPM version: 8.19.2
Installing iobroker.js-controller@4.0.23... (System call)
npm WARN deprecated dgram@1.0.1: npm is holding this package for security reasons. As it's a core Node module, we will not transfer it over to other users. You may safely remove the package from your dependencies.
npm WARN deprecated har-validator@5.1.5: this library is no longer supported
npm WARN deprecated request-promise@4.2.6: request-promise has been deprecated because it extends the now deprecated request package, see https://github.com/request/request/issues/3142
npm WARN deprecated appdirectory@0.1.0: Package no longer supported. Contact Support at https://www.npmjs.com/support for more info.
npm WARN deprecated node-inspect@2.0.0: This module is part of Node.js core and does not need to be installed separately. It is now unmaintained.
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated debug@4.1.1: Debug versions >=3.2.0 <3.2.7 || >=4 <4.3.1 have a low-severity ReDos regression when used in a Node.js environment. It is recommended you upgrade to 3.2.7 or 4.3.1. (https://github.com/visionmedia/debug/issues/797)
npm WARN deprecated uuid@3.4.0: Please upgrade  to version 7 or higher.  Older versions may use Math.random() in certain circumstances, which is known to be problematic.  See https://v8.dev/blog/math-random for details.
npm WARN deprecated request@2.88.2: request has been deprecated, see https://github.com/request/request/issues/3142
npm ERR! code 1
npm ERR! path /opt/iobroker/node_modules/openzwave-shared
npm ERR! command failed
npm ERR! command sh -c -- node-gyp rebuild
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/openzwave-shared/build“ wird betreten
npm ERR!   CXX(target) Release/obj.target/openzwave_shared/src/callbacks.o
npm ERR! make: Verzeichnis „/opt/iobroker/node_modules/openzwave-shared/build“ wird verlassen
npm ERR! gyp info it worked if it ends with ok
npm ERR! gyp info using node-gyp@9.1.0
npm ERR! gyp info using node@16.17.1 | linux | arm
npm ERR! gyp info find Python using Python version 3.9.2 found at "/usr/bin/python3"
npm ERR! gyp info spawn /usr/bin/python3
npm ERR! gyp info spawn args [
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py',
npm ERR! gyp info spawn args   'binding.gyp',
npm ERR! gyp info spawn args   '-f',
npm ERR! gyp info spawn args   'make',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/opt/iobroker/node_modules/openzwave-shared/build/config.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/usr/lib/node_modules/npm/node_modules/node-gyp/addon.gypi',
npm ERR! gyp info spawn args   '-I',
npm ERR! gyp info spawn args   '/home/iobroker/.cache/node-gyp/16.17.1/include/node/common.gypi',
npm ERR! gyp info spawn args   '-Dlibrary=shared_library',
npm ERR! gyp info spawn args   '-Dvisibility=default',
npm ERR! gyp info spawn args   '-Dnode_root_dir=/home/iobroker/.cache/node-gyp/16.17.1',
npm ERR! gyp info spawn args   '-Dnode_gyp_dir=/usr/lib/node_modules/npm/node_modules/node-gyp',
npm ERR! gyp info spawn args   '-Dnode_lib_file=/home/iobroker/.cache/node-gyp/16.17.1/<(target_arch)/node.lib',
npm ERR! gyp info spawn args   '-Dmodule_root_dir=/opt/iobroker/node_modules/openzwave-shared',
npm ERR! gyp info spawn args   '-Dnode_engine=v8',
npm ERR! gyp info spawn args   '--depth=.',
npm ERR! gyp info spawn args   '--no-parallel',
npm ERR! gyp info spawn args   '--generator-output',
npm ERR! gyp info spawn args   'build',
npm ERR! gyp info spawn args   '-Goutput_dir=.'
npm ERR! gyp info spawn args ]
npm ERR! gyp info spawn make
npm ERR! gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
npm ERR! In file included from /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8.h:30,
npm ERR!                  from ../src/openzwave.hpp:27,
npm ERR!                  from ../src/callbacks.cc:18:
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h: In function ‘void v8::internal::PerformCastCheck(T*)’:
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:38: error: ‘remove_cv_t’ is not a member of ‘std’; did you mean ‘remove_cv’?
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                      ^~~~~~~~~~~
npm ERR!       |                                      remove_cv
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:38: error: ‘remove_cv_t’ is not a member of ‘std’; did you mean ‘remove_cv’?
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                      ^~~~~~~~~~~
npm ERR!       |                                      remove_cv
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:50: error: template argument 2 is invalid
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                                  ^
npm ERR! /home/iobroker/.cache/node-gyp/16.17.1/include/node/v8-internal.h:492:63: error: ‘::Perform’ has not been declared
npm ERR!   492 |             !std::is_same<Data, std::remove_cv_t<T>>::value>::Perform(data);
npm ERR!       |                                                               ^~~~~~~
npm ERR! make: *** [openzwave_shared.target.mk:148: Release/obj.target/openzwave_shared/src/callbacks.o] Fehler 1
npm ERR! gyp ERR! build error 
npm ERR! gyp ERR! stack Error: `make` failed with exit code: 2
npm ERR! gyp ERR! stack     at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:201:23)
npm ERR! gyp ERR! stack     at ChildProcess.emit (node:events:513:28)
npm ERR! gyp ERR! stack     at Process.ChildProcess._handle.onexit (node:internal/child_process:291:12)
npm ERR! gyp ERR! System Linux 5.15.61-v7l+
npm ERR! gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
npm ERR! gyp ERR! cwd /opt/iobroker/node_modules/openzwave-shared
npm ERR! gyp ERR! node -v v16.17.1
npm ERR! gyp ERR! node-gyp -v v9.1.0
npm ERR! gyp ERR! not ok

npm ERR! A complete log of this run can be found in:
npm ERR!     /home/iobroker/.npm/_logs/2022-09-30T16_58_37_038Z-debug-0.log

Teil 2:

uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs
armv7l
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v16.17.1
v16.17.1
8.19.2
4.0.21
pi
pi adm dialout cdrom sudo audio video plugdev games users input netdev gpio i2c spi iobroker
/home
OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
OK:2 http://archive.raspberrypi.org/debian bullseye InRelease                                                                                                               
OK:3 https://repos.influxdata.com/debian bullseye InRelease                                                                                                                 
OK:4 https://phoscon.de/apt/deconz bullseye InRelease                                                                   
OK:5 https://deb.nodesource.com/node_16.x bullseye InRelease                                    
Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
Aktualisierung für 4 Pakete verfügbar. Führen Sie »apt list --upgradable« aus, um sie anzuzeigen.
nodejs:
 Installiert:           16.17.1-deb-1nodesource1
 Installationskandidat: 16.17.1-deb-1nodesource1
 Versionstabelle:
*** 16.17.1-deb-1nodesource1 500
       500 https://deb.nodesource.com/node_16.x bullseye/main armhf Packages
       100 /var/lib/dpkg/status
    12.22.12~dfsg-1~deb11u1 500
       500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
``
[/s]

Thomas Braun

@mr-burns

Interessanter wäre:

sudo ln -s /usr/bin/node /usr/bin/nodejs
uname -m && type -P nodejs node npm && nodejs -v && node -v && npm -v && iob -v && whoami && groups && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs

Thomas Braun

@mr-burns sagte in js-controller lässt sich nicht updaten...:

Lass die Finger von individuellen Updates von npm. Egal ob das irgendwo empfohlen wird.

iobroker stop
sudo apt update
sudo apt full-upgrade
sudo apt install --reinstall nodejs
cd /opt/iobroker 
sudo -H -u iobroker npm cache clear --force
sudo reboot

Thomas Braun

@mr-burns

Warum wird da eigentlich openzwave gebaut?
Wenn ich der readme von zwave2 vertrauen darf wird das (anders als iobroker.zwave) da garnicht benötigt?
Was haste da also am Start?

iob update -i

Mr. Burns

@thomas-braun Das ist ein gute Frage...kann ich nicht beantworten.
Ich habe die zwave adapter installiert aber nicht aktiviert (haben nicht funktioniert oder so, weiß nicht mehr genau)

Community Forum

NEWS

js-controller lässt sich nicht updaten...

Support us

330

32.9k

83.0k

1.3m