Z-Wave Adapter
-
Ev. mein Fehler in der Doku, hast du openzwave Header und Libraries installiert? `
Natürlich nicht, dann hätte ich ja lesen müssen :oops:Order /opt ist ok dafür?
EDIT:
jetzt ließ es sich über putty installieren - in iobroker admin war jetzt die Version 0.2.0 - update auf 0.2.1 verfügbar.
Das habe ich über den admin auf den neuesten Stand gebracht - dachte ich - danach immer noch v. 0.2.0 undupdate auf 0.2.1 verfügbar.
Gruß
Rainer
-
in iobroker admin war jetzt die Version 0.2.0 - update auf 0.2.1 verfügbar.
Das habe ich über den admin auf den neuesten Stand gebracht - dachte ich - danach immer noch v. 0.2.0 undupdate auf 0.2.1 verfügbar. `
Sollte gefixt sein. -
Ja!
Stieg wiedermit code 10 aus - danach war aber die neue Version drin
Gruß
Rainer
-
hallo zusammen
erst mal danke für die tolle arbeit zwave einzubinden. leider versuche ich es seit einer woche . mein aeon stick gen5 wird erkannt. danach versuche ich ein gerät anulerne , das geht aber nicht. wie kriege ich den stick in den anlern modus. auf den bilder weiter vorne hat es beim adapter mehr als nur das gerät tab. bei mir sieht es so aus. was fehlt mir noch?
817_zwave.jpg -
hallo
wirklich keiner eine idee, wie habt es ihr gemacht? ist überhaupt jemand noch in diesem forum?
gruss und danke
-
Ich vermute, dass anlernen und so weiter passiert in openzwave Oberfläche. Das hier ist nur um die angelernte Geräte zu exportieren.
-
Ich vermute, dass anlernen und so weiter passiert in openzwave Oberfläche. Das hier ist nur um die angelernte Geräte zu exportieren. `
hallo bluefox
danke für deine Antwort. wie meinst in der openzwave oberfläche. ist das nicht die aus meinem screenshot? bei den bildern weiter vorne im thread sieht man in diesem menu mehr tabs als in meinem, ich habe das gefühlt mir fehlt etwas, aber was.
Gruss
-
https://github.com/OpenZWave/open-zwave-control-panel
Jemand hat geschrieben, dass Adapterist gut, nur anlernen Funktion fehlt…
Wenn ich wüsste, wie man die Anlernen-Funktion aufrufen konnte, dann konnte ich dann Adapter erweitern.
Ich habe nur gefunden softReset und hardReset.
-
Ich habe jetzt viel neuere Version von openzwave lib für node.js entdeckt:
https://github.com/OpenZWave/node-openzwave-shared
Vielleicht konnte husky-koglhof mal schauen.
-
Ich habe jetzt viel neuere Version von openzwave lib für node.js entdeckt:
https://github.com/OpenZWave/node-openzwave-shared
Vielleicht konnte husky-koglhof mal schauen. `
kopier ich das ganze zip in meine ordner oder muss ich was kompilieren
-
interessant wäre wenn man das integrieren könnte
-
Hallo
Ich habe heute versucht ZWave zu installieren und leider bekomme ich folgende Fehler :evil:
iobroker 2015-11-11 12:03:48 info exit 14
iobroker 2015-11-11 12:03:48 error host.raspberrypi error: reading io-package.json SyntaxError: Unexpected string
iobroker 2015-11-11 12:03:48 info host.raspberrypi install adapter zwave
iobroker 2015-11-11 12:03:46 info add zwave
host-raspberrypi 2015-11-11 12:03:32 warn warning: Following packages cannot be read: example
Gruss
-
ok, Fehler gefunden
"desc": {
"en": "ZWave support based on openzwave packet",
"de": "ZWave Unterstützung dürch Openzwave Paket",
"ru": "Поддержка ZWave оÑÐ½Ð¾Ð²Ð°Ð½Ð½Ð°Ñ Ð½Ð° Openzwave пакете"
},
nach "}" war kein Komma
Gruss
-
Hallo zusammen
Heute habe ich wieder ein bisschen mit Z-Wave „gespielt“.
Ich habe den Aeotec Z-Stick Gen5 und Fibaro Motion Sensor. Alles mit ZWave Modul könnte ich installieren und zum laufen gebracht. Leider wenn ich die hm-rega und hm-rpc mit CCU2 verbinde und aktiviere, ist nach kurze Zeit meine CCU2 nicht mehr erreicht von ioBroker wie auch über Browser. Nach dem Start von CCU funktioniert CCU aber ioBroker meldet die ganze Zeit Timeout und hat keine Verbindung mit der CCU. Starte ich wieder ioBroker dann hängt sich wieder CCU auf.
ioBroker ist auf RPI-2, alle Module ausser js-controller (ist 7.14) auf neustem Stand.
Gruss
-
Hallo, habe den zwave Adapter komplett überarbeitet und teste ihn derzeit intensiv.
Ich werde wenn alles klappt, morgen zur Verfügung stellen.
Sollte dann auch in occ und HomeKit funktionieren.
Das Alarm Thema versuche ich noch ausgiebig, meine Katzen sind super Tester.
Auch habe ich alles soweit vorbereitet, das die neue History funktioniert.
Gesendet von meinem iPhone mit Tapatalk
-
Super, ich wollte schon selber da was anschauen, aber es gab immer wieder was wichtigeres (und gibt es immer noch) zu tun.
Konnte es möglich sein aus ioBroker Anlernen-Modus starten?
-
Ja, anlernen und ablernen ist drinnen, die weiteren Funktionen kommen dann in den Weihnachtsferien.
Habe einige Geräte zum testen mittlerweile zuhause. Nach Weihnachten kommen dann die nächsten.
Gesendet von meinem iPhone mit Tapatalk
-
Hallo, im GitHub von Bluefox / ioBroker ist eine neue Version von zWave drinnen.
Die neue Version installiert automatisch die Abhängigkeit von open-zwave aus GitHub und kompiliert diese
bzw. installiert diese im System lt. Makefile.
Zusätzlich wurden in der ZWave Administrationsoberfläche die Funkionen Hinzufügen / Entfernen von Geräten
hinzugefügt.
Soweit bekannt, wurden bereits korrekte Typen / Rollen zugewiesen.
Bitte testen und Bescheid geben.
In der Zwischenzeit werde ich weitere administrative Funktionen entwickeln.
Näheres ist dem Readme zu entnehmen.
LG Christian
-
Danke versteck für diene Erweiterungen. Habe die Version veröffentlicht.
Ich finde zwave eine von der wichtigsten Adaptern.
Obwohl den momentan nur 8 Leute benutzen. Es wird schon mehr sein
-
hallo zusammen,
habe Z-Wave nach der Anleitung auf Seite 2 installiert. Aber leider läuft hier was schief.
Z-Stick Gen5 und Fibaro Roller-Shutter werden erkannt (denke ich)
Ich hatte hier auch Beispielscreens gesehen wo die Comclass im "Geräte-Tab" angezeigt wird. Ist bei mir leer. Sollte so nicht sein, denke ich.
Wenn ich manuell an dem Taster das Rollo bewege ändert sich der Wert bei "zwave.0.NODE8.SWITCH_MULTILEVEL.Level_1"
Wenn ich nun im VIS diese Objekt-ID anspreche (jqui-mfd - Shutter + jqui Dialog) bekomme ich im Log einen weiteren Fehler:
! ````
host-lemaker 2016-01-15 16:49:26 info instance system.adapter.zwave.0 terminated with code 6 (uncaught exception)
TypeError: 2016-01-15 16:49:23 error at Manager.ondata (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/manager.js:291:16)
TypeError: 2016-01-15 16:49:23 error at Decoder.add (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/socket.io-parser/index.js:247:12)
TypeError: 2016-01-15 16:49:23 error at Decoder.Emitter.emit (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-emitter/index.js:134:20)
TypeError: 2016-01-15 16:49:23 error at Decoder. (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-bind/index.js:21:15)
TypeError: 2016-01-15 16:49:23 error at Manager.ondecoded (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/manager.js:301:8)
TypeError: 2016-01-15 16:49:23 error at Manager.Emitter.emit (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-emitter/index.js:134:20)
TypeError: 2016-01-15 16:49:23 error at Manager. (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/component-bind/index.js:21:15)
TypeError: 2016-01-15 16:49:23 error at Socket.onpacket (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/socket.js:220:12)
TypeError: 2016-01-15 16:49:23 error at Socket.onack (/opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/lib/socket.js:295:6)
TypeError: 2016-01-15 16:49:23 error at Socket. (/opt/iobroker/node_modules/iobroker.zwave/main.js:260:43)
TypeError: 2016-01-15 16:49:23 error setValue: OpenZWave valueId not found
uncaught 2016-01-15 16:49:23 error exception: setValue: OpenZWave valueId not found
zwave-0 2016-01-15 16:49:23 error setState for: nodeid=undefined: comclass=undefined: index=0: instance=1: value=25ich würde meinen der Z-Stick empfängt Daten vom Rollo-Shutter, kann aber nichts senden. Hier noch das Log vom starten des Adapters iobroker.zwave: >! ```` lemaker 2016-01-15 16:35:56 warn host.lemaker instance system.adapter.zwave.0 already running with pid 2612 zwave.0 2016-01-15 16:35:33 info zwave.0 Scan completed zwave.0 2016-01-15 16:35:33 info zwave.0 node ready nodeid:8 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Power_1 = 0.0 index = 8 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Energy_1 = 0.00 index = 0 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.SENSOR_MULTILEVEL.Power_1 = 0.0 index = 4 comclass = 49 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Level_1 = 0 index = 0 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_BINARY.Switch_1 = false index = 0 comclass = 37 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.PROTECTION.Protection = Unprotected index = 0 comclass = 117 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Timeout = 0 index = 1 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Powerlevel = Normal index = 0 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 info zwave.0 node ready nodeid:1 nodeinfo:{"manufacturer":"Aeotec","manufacturerid":"0x0086","product":"Z-Stick Gen5","producttype":"0x0001","productid":"0x005a","type":"Static PC Controller","name":"","lo zwave.0 2016-01-15 16:35:33 info zwave.0 controller command feedback: state:The command has completed successfully #### error:No error #### helpmsg:ControllerCommand - Completed #### currently not implemented zwave.0 2016-01-15 16:35:33 info zwave.0 controller command feedback: state:The controller is communicating with the other device to carry out the command #### error:No error #### helpmsg:ControllerCommand - InProgress #### currently zwave.0 2016-01-15 16:35:33 info zwave.0 controller command feedback: state:The command is starting #### error:No error #### helpmsg:ControllerComand - Starting #### currently not implemented zwave.0 2016-01-15 16:35:33 info zwave.0 controller command feedback: state:The command has completed successfully #### error:No error #### helpmsg:ControllerCommand - Completed #### currently not implemented zwave.0 2016-01-15 16:35:33 info zwave.0 controller command feedback: state:The controller is communicating with the other device to carry out the command #### error:No error #### helpmsg:ControllerCommand - InProgress #### currently zwave.0 2016-01-15 16:35:33 info zwave.0 controller command feedback: state:The command is starting #### error:No error #### helpmsg:ControllerComand - Starting #### currently not implemented zwave.0 2016-01-15 16:35:33 info zwave.0 node8: nop, currently not implemented zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.VERSION.Application Version = 25.25 index = 2 comclass = 134 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.VERSION.Protocol Version = 3.52 index = 1 comclass = 134 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.VERSION.Library Version = 3 index = 0 comclass = 134 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.PROTECTION.Protection = Unprotected index = 0 comclass = 117 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Acked Frames = 0 index = 9 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Status = Failed index = 8 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Report = undefined index = 7 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Test = undefined index = 6 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Frame Count = 0 index = 5 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Powerlevel = Normal index = 4 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Node = 0 index = 3 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Set Powerlevel = undefined index = 2 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Timeout = 0 index = 1 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Powerlevel = Normal index = 0 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:33 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Scenes / Associations activation = Associations activation index = 50 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Self-measurement_ = Self-measurement active index = 44 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Energy reports = 10 index = 43 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Periodic power or energy reports = 3600 index = 42 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Power reports = 10 index = 40 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Managing lamellas in response to alarm = Set lamellas to their extreme position index = 35 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to temperature alarm = Open blind index = 33 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to smoke, CO or CO2 alarm = Open blind index = 32 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to flooding alarm = No reaction index = 31 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to general alarm = Close blind index = 30 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Forced Roller Shutter calibration = Default index = 29 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Motor operation time = 240 index = 22 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Motor operation detection = 10 index = 18 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.In Roller Blind Mode or Venetian Blind mode the parameter determines when the Roller Shutter relays are turned off after reaching a limit switch zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Switch type = Momentary switches index = 14 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Set lamellas back to previous position = 1 - Lamellas return to previously set position in case of the main controller operation, momentary switc zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.In Venetian Blind mode the parameter determines time of full turn of the lamellas = 150 index = 12 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Roller Shutter operating modes = 0 - Roller Blind Mode, without positioning index = 10 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Reports type = Blind position reports sent to the main controller using Z-Wave Command Class index = 3 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.RF Protection (radio protection) = No protection. Roller Shutter responds to command frames index = 2 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Local Protection = No protection. Roller Shutter responds to push buttons index = 1 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Reset = undefined index = 33 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Power_1 = 0.0 index = 8 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Energy_1 = 0.00 index = 0 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SENSOR_MULTILEVEL.Power_1 = 0.0 index = 4 comclass = 49 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Start Level = 0 index = 4 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Ignore Start Level = true index = 3 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Close_1 = undefined index = 2 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Open_1 = undefined index = 1 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Level_1 = 0 index = 0 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Dimming Duration = 255 index = 5 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Dec_1 = undefined index = 8 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Inc_1 = undefined index = 7 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Step Size_1 = 0 index = 6 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_BINARY.Switch_1 = false index = 0 comclass = 37 instance = 1 zwave.0 2016-01-15 16:35:32 info zwave.0 nodeid 8 is now available, but maybe not ready zwave.0 2016-01-15 16:35:32 error zwave.0 ##### Value added: zwave.0.NODE1.BASIC.Basic = 0 index = 0 comclass = 32 instance = 1 zwave.0 2016-01-15 16:35:32 info zwave.0 nodeid 1 is now available, but maybe not ready zwave.0 2016-01-15 16:35:32 info zwave.0 driver ready: homeid = 3546953341 zwave.0 2016-01-15 16:35:32 info zwave.0 scanning homeid=0xd36a367d... zwave.0 2016-01-15 16:35:32 info zwave.0 connected: homeid = 1.4.0 zwave.0 2016-01-15 16:35:30 info zwave.0 starting. Version 0.2.5 in /opt/iobroker/node_modules/iobroker.zwave lemaker 2016-01-15 16:35:26 info host.lemaker instance system.adapter.zwave.0 started with pid 2612 lemaker 2016-01-15 16:35:26 info host.lemaker Restart adapter system.adapter.zwave.0 because enabled lemaker 2016-01-15 16:35:26 warn host.lemaker instance system.adapter.zwave.0 terminated due to SIGSEGV lemaker 2016-01-15 16:35:24 info host.lemaker stopInstance system.adapter.zwave.0 killing pid 2603 lemaker 2016-01-15 16:35:24 info host.lemaker stopInstance system.adapter.zwave.0 lemaker 2016-01-15 16:35:24 info host.lemaker object change system.adapter.zwave.0 zwave.0 2016-01-15 16:35:11 info zwave.0 Scan completed zwave.0 2016-01-15 16:35:11 info zwave.0 node ready nodeid:8 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Power_1 = 0.0 index = 8 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Energy_1 = 0.00 index = 0 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SENSOR_MULTILEVEL.Power_1 = 0.0 index = 4 comclass = 49 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Level_1 = 0 index = 0 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_BINARY.Switch_1 = false index = 0 comclass = 37 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.PROTECTION.Protection = Unprotected index = 0 comclass = 117 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Timeout = 0 index = 1 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Powerlevel = Normal index = 0 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 info zwave.0 node ready nodeid:1 nodeinfo:{"manufacturer":"Aeotec","manufacturerid":"0x0086","product":"Z-Stick Gen5","producttype":"0x0001","productid":"0x005a","type":"Static PC Controller","name":"","lo zwave.0 2016-01-15 16:35:11 info zwave.0 controller command feedback: state:The command has completed successfully #### error:No error #### helpmsg:ControllerCommand - Completed #### currently not implemented zwave.0 2016-01-15 16:35:11 info zwave.0 controller command feedback: state:The controller is communicating with the other device to carry out the command #### error:No error #### helpmsg:ControllerCommand - InProgress #### currently zwave.0 2016-01-15 16:35:11 info zwave.0 controller command feedback: state:The command is starting #### error:No error #### helpmsg:ControllerComand - Starting #### currently not implemented zwave.0 2016-01-15 16:35:11 info zwave.0 controller command feedback: state:The command has completed successfully #### error:No error #### helpmsg:ControllerCommand - Completed #### currently not implemented zwave.0 2016-01-15 16:35:11 info zwave.0 controller command feedback: state:The controller is communicating with the other device to carry out the command #### error:No error #### helpmsg:ControllerCommand - InProgress #### currently zwave.0 2016-01-15 16:35:11 info zwave.0 controller command feedback: state:The command is starting #### error:No error #### helpmsg:ControllerComand - Starting #### currently not implemented zwave.0 2016-01-15 16:35:11 info zwave.0 node8: nop, currently not implemented zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.VERSION.Application Version = 25.25 index = 2 comclass = 134 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.VERSION.Protocol Version = 3.52 index = 1 comclass = 134 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.VERSION.Library Version = 3 index = 0 comclass = 134 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.PROTECTION.Protection = Unprotected index = 0 comclass = 117 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Acked Frames = 0 index = 9 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Status = Failed index = 8 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Report = undefined index = 7 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Test = undefined index = 6 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Frame Count = 0 index = 5 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Powerlevel = Normal index = 4 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Node = 0 index = 3 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Set Powerlevel = undefined index = 2 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Timeout = 0 index = 1 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.POWERLEVEL.Powerlevel = Normal index = 0 comclass = 115 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Scenes / Associations activation = Associations activation index = 50 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Self-measurement_ = Self-measurement active index = 44 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Energy reports = 10 index = 43 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Periodic power or energy reports = 3600 index = 42 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Power reports = 10 index = 40 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Managing lamellas in response to alarm = Set lamellas to their extreme position index = 35 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to temperature alarm = Open blind index = 33 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to smoke, CO or CO2 alarm = Open blind index = 32 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to flooding alarm = No reaction index = 31 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to general alarm = Close blind index = 30 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Forced Roller Shutter calibration = Default index = 29 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Motor operation time = 240 index = 22 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Motor operation detection = 10 index = 18 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.In Roller Blind Mode or Venetian Blind mode the parameter determines when the Roller Shutter relays are turned off after reaching a limit switch zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Switch type = Momentary switches index = 14 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Set lamellas back to previous position = 1 - Lamellas return to previously set position in case of the main controller operation, momentary switc zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.In Venetian Blind mode the parameter determines time of full turn of the lamellas = 150 index = 12 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Roller Shutter operating modes = 0 - Roller Blind Mode, without positioning index = 10 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Reports type = Blind position reports sent to the main controller using Z-Wave Command Class index = 3 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.RF Protection (radio protection) = No protection. Roller Shutter responds to command frames index = 2 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.CONFIGURATION.Local Protection = No protection. Roller Shutter responds to push buttons index = 1 comclass = 112 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Reset = undefined index = 33 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Power_1 = 0.0 index = 8 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.METER.Energy_1 = 0.00 index = 0 comclass = 50 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SENSOR_MULTILEVEL.Power_1 = 0.0 index = 4 comclass = 49 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Start Level = 0 index = 4 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Ignore Start Level = true index = 3 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Close_1 = undefined index = 2 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Open_1 = undefined index = 1 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Level_1 = 0 index = 0 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Dimming Duration = 255 index = 5 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Dec_1 = undefined index = 8 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Inc_1 = undefined index = 7 comclass = 38 instance = 1 zwave.0 2016-01-15 16:35:11 error zwave.0 ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Step Size_1 = 0 index = 6 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:11 info Scan completed zwave-0 2016-01-15 16:35:11 info node ready nodeid:8 nodeinfo:{"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGRM222 Roller Shutter Controller 2","producttype":"0x0302","productid":"0x1000","type":"Motor Contro zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.METER.Power_1 = 0.0 index = 8 comclass = 50 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.METER.Energy_1 = 0.00 index = 0 comclass = 50 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.SENSOR_MULTILEVEL.Power_1 = 0.0 index = 4 comclass = 49 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Level_1 = 0 index = 0 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.SWITCH_BINARY.Switch_1 = false index = 0 comclass = 37 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.PROTECTION.Protection = Unprotected index = 0 comclass = 117 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Timeout = 0 index = 1 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:11 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Powerlevel = Normal index = 0 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:11 info node ready nodeid:1 nodeinfo:{"manufacturer":"Aeotec","manufacturerid":"0x0086","product":"Z-Stick Gen5","producttype":"0x0001","productid":"0x005a","type":"Static PC Controller","name":"","loc":""} zwave-0 2016-01-15 16:35:11 info controller command feedback: state:The command has completed successfully #### error:No error #### helpmsg:ControllerCommand - Completed #### currently not implemented zwave-0 2016-01-15 16:35:10 info controller command feedback: state:The controller is communicating with the other device to carry out the command #### error:No error #### helpmsg:ControllerCommand - InProgress #### currently not im zwave-0 2016-01-15 16:35:10 info controller command feedback: state:The command is starting #### error:No error #### helpmsg:ControllerComand - Starting #### currently not implemented zwave-0 2016-01-15 16:35:10 info controller command feedback: state:The command has completed successfully #### error:No error #### helpmsg:ControllerCommand - Completed #### currently not implemented zwave-0 2016-01-15 16:35:10 info controller command feedback: state:The controller is communicating with the other device to carry out the command #### error:No error #### helpmsg:ControllerCommand - InProgress #### currently not im zwave-0 2016-01-15 16:35:10 info controller command feedback: state:The command is starting #### error:No error #### helpmsg:ControllerComand - Starting #### currently not implemented zwave-0 2016-01-15 16:35:10 info node8: nop, currently not implemented zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.VERSION.Application Version = 25.25 index = 2 comclass = 134 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.VERSION.Protocol Version = 3.52 index = 1 comclass = 134 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.VERSION.Library Version = 3 index = 0 comclass = 134 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.PROTECTION.Protection = Unprotected index = 0 comclass = 117 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Acked Frames = 0 index = 9 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Status = Failed index = 8 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Report = undefined index = 7 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Test = undefined index = 6 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Frame Count = 0 index = 5 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Powerlevel = Normal index = 4 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Test Node = 0 index = 3 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Set Powerlevel = undefined index = 2 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Timeout = 0 index = 1 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.POWERLEVEL.Powerlevel = Normal index = 0 comclass = 115 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Scenes / Associations activation = Associations activation index = 50 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Self-measurement_ = Self-measurement active index = 44 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Energy reports = 10 index = 43 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Periodic power or energy reports = 3600 index = 42 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Power reports = 10 index = 40 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Managing lamellas in response to alarm = Set lamellas to their extreme position index = 35 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to temperature alarm = Open blind index = 33 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to smoke, CO or CO2 alarm = Open blind index = 32 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to flooding alarm = No reaction index = 31 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Response to general alarm = Close blind index = 30 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Forced Roller Shutter calibration = Default index = 29 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Motor operation time = 240 index = 22 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Motor operation detection = 10 index = 18 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.In Roller Blind Mode or Venetian Blind mode the parameter determines when the Roller Shutter relays are turned off after reaching a limit switch = 10 in zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Switch type = Momentary switches index = 14 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Set lamellas back to previous position = 1 - Lamellas return to previously set position in case of the main controller operation, momentary switch opera zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.In Venetian Blind mode the parameter determines time of full turn of the lamellas = 150 index = 12 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Roller Shutter operating modes = 0 - Roller Blind Mode, without positioning index = 10 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Reports type = Blind position reports sent to the main controller using Z-Wave Command Class index = 3 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.RF Protection (radio protection) = No protection. Roller Shutter responds to command frames index = 2 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.CONFIGURATION.Local Protection = No protection. Roller Shutter responds to push buttons index = 1 comclass = 112 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.METER.Reset = undefined index = 33 comclass = 50 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.METER.Exporting_1 = false index = 32 comclass = 50 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.METER.Power_1 = 0.0 index = 8 comclass = 50 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.METER.Energy_1 = 0.00 index = 0 comclass = 50 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SENSOR_MULTILEVEL.Power_1 = 0.0 index = 4 comclass = 49 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Start Level = 0 index = 4 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Ignore Start Level = true index = 3 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Close_1 = undefined index = 2 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Open_1 = undefined index = 1 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Level_1 = 0 index = 0 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Dimming Duration = 255 index = 5 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Dec_1 = undefined index = 8 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Inc_1 = undefined index = 7 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_MULTILEVEL.Step Size_1 = 0 index = 6 comclass = 38 instance = 1 zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE8.SWITCH_BINARY.Switch_1 = true index = 0 comclass = 37 instance = 1 zwave-0 2016-01-15 16:35:10 info nodeid 8 is now available, but maybe not ready zwave-0 2016-01-15 16:35:10 error ##### Value added: zwave.0.NODE1.BASIC.Basic = 0 index = 0 comclass = 32 instance = 1 zwave-0 2016-01-15 16:35:10 info nodeid 1 is now available, but maybe not ready zwave-0 2016-01-15 16:35:10 info driver ready: homeid = 3546953341 zwave-0 2016-01-15 16:35:10 info scanning homeid=0xd36a367d... zwave-0 2016-01-15 16:35:10 info connected: homeid = 1.4.0 zwave-0 2016-01-15 16:35:07 info starting. Version 0.2.5 in /opt/iobroker/node_modules/iobroker.zwave host-lemaker 2016-01-15 16:35:03 info instance system.adapter.zwave.0 started with pid 2603 host-lemaker 2016-01-15 16:35:03 info object change system.adapter.zwave.0 host-lemaker 2016-01-15 16:34:57 info object change system.adapter.zwave.0 host-lemaker 2016-01-15 16:34:52 info ls /dev host-lemaker 2016-01-15 16:32:55 info instance system.adapter.ical.0 terminated with code 0 (OK)Schon mal vielen Dank für eure Hilfe!
