Probleme mit Serialport bei zwave2
-
Linux raspberrypi 5.10.17-v7l+ #1414 SMP Fri Apr 30 13:20:47 BST 2021 armv7l The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. Last login: Sun May 16 00:06:39 2021 pi@raspberrypi:~ $ npm i iobroker.zwave2 > @serialport/bindings@9.0.7 install /home/pi/node_modules/@serialport/bindings > prebuild-install --tag-prefix @serialport/bindings@ || node-gyp rebuild prebuild-install WARN install No prebuilt binaries found (target=12.22.1 runtime=node arch=arm libc= platform=linux) make: Verzeichnis „/home/pi/node_modules/@serialport/bindings/build“ wird betreten CXX(target) Release/obj.target/bindings/src/serialport.o ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Open(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:78:69: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Open, (uv_after_work_cb)EIO_AfterOpen); ^~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Update(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:135:71: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Update, (uv_after_work_cb)EIO_AfterUpdate); ^~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Close(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:175:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Close, (uv_after_work_cb)EIO_AfterClose); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Flush(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:215:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Flush, (uv_after_work_cb)EIO_AfterFlush); ^~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Set(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:271:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Set, (uv_after_work_cb)EIO_AfterSet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Get(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:316:68: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Get, (uv_after_work_cb)EIO_AfterGet); ^~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE GetBaudRate(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:366:76: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] _queue_work(uv_default_loop(), req, EIO_GetBaudRate, (uv_after_work_cb)EIO_AfterGetBaudRate); ^~~~~~~~~~~~~~~~~~~~ ../src/serialport.cpp: In function ‘Nan::NAN_METHOD_RETURN_TYPE Drain(Nan::NAN_METHOD_ARGS_TYPE)’: ../src/serialport.cpp:412:70: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] uv_queue_work(uv_default_loop(), req, EIO_Drain, (uv_after_work_cb)EIO_AfterDrain); ^~~~~~~~~~~~~~ ../src/serialport.cpp: At global scope: ../src/serialport.cpp:433:28: warning: unnecessary parentheses in declaration of ‘ToParityEnum’ [-Wparentheses] SerialPortParity NAN_INLINE(ToParityEnum(const v8::Local<v8::String>& v8str)) { ^ ../src/serialport.cpp:452:30: warning: unnecessary parentheses in declaration of ‘ToStopBitEnum’ [-Wparentheses] SerialPortStopBits NAN_INLINE(ToStopBitEnum(double stopBits)) { ^ In file included from ../../../nan/nan.h:56, from ../src/./serialport.h:6, from ../src/serialport.cpp:1: /home/pi/.cache/node-gyp/12.22.1/include/node/node.h:736:43: warning: cast between incompatible function types from ‘void (*)(Nan::ADDON_REGISTER_FUNCTION_ARGS_TYPE)’ {aka ‘void (*)(v8::Local<v8::Object>)’} to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/pi/.cache/node-gyp/12.22.1/include/node/node.h:770:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/serialport.cpp:486:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(serialport, init); ^~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/serialport_unix.o ../src/serialport_unix.cpp: In function ‘int setup(int, OpenBaton*)’: ../src/serialport_unix.cpp:176:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1005 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:176:13: note: ‘snprintf’ output 20 or more bytes (assuming 1043) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error %s Cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp: In function ‘void EIO_Open(uv_work_t*)’: ../src/serialport_unix.cpp:86:60: warning: ‘%s’ directive output may be truncated writing up to 1023 bytes into a region of size 1003 [-Wformat-truncation=] snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ ../src/serialport_unix.cpp:86:13: note: ‘snprintf’ output 22 or more bytes (assuming 1045) into a destination of size 1024 snprintf(data->errorString, sizeof(data->errorString), "Error: %s, cannot open %s", strerror(errno), data->path); ~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CXX(target) Release/obj.target/bindings/src/poller.o CXX(target) Release/obj.target/bindings/src/serialport_linux.o SOLINK_MODULE(target) Release/obj.target/bindings.node COPY Release/bindings.node make: Verzeichnis „/home/pi/node_modules/@serialport/bindings/build“ wird verlassennpm WARN saveError ENOENT: no such file or directory, open '/home/pi/package.json' npm notice created a lockfile as package-lock.json. You should commit this file. npm WARN enoent ENOENT: no such file or directory, open '/home/pi/package.json' npm WARN pi No description npm WARN pi No repository field. npm WARN pi No README data npm WARN pi No license field. + iobroker.zwave2@1.10.0 added 168 packages from 189 contributors and audited 168 packages in 41.299s 29 packages are looking for funding run `npm fund` for details found 0 vulnerabilities pi@raspberrypi:~ $ npm i zwave-js npm WARN saveError ENOENT: no such file or directory, open '/home/pi/package.json' npm WARN enoent ENOENT: no such file or directory, open '/home/pi/package.json' npm WARN pi No description npm WARN pi No repository field. npm WARN pi No README data npm WARN pi No license field. + zwave-js@7.4.0 updated 1 package and audited 309 packages in 6.047s 29 packages are looking for funding run `npm fund` for details found 0 vulnerabilities pi@raspberrypi:~ $ -
Das ist die Raspi3 die die funktionniert (npm version vielleicht passt nicht)
(hier ist ACM0) auf raspi4 geht auch nicht fehlt etwas ?
-
@esmax666 sagte in Test Adapter Z-Wave 2 v1.10.x:
steht sogar in log
Da steht, dass /dev kein device node ist sondern ein Verzeichnis. Vermutlich hast du /dev in den Einstellungen des Adapters drin.
pi@raspberrypi:~ $ npm i iobroker.zwave2
Ist falsch. Jetzt hast du das im /home-Verzeichnis von pi installiert.
Nimm den Adapter aus der Adapterliste im Admin.Aus deinem dmesg:
[Sa Mai 15 21:06:15 2021] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2Das ist der für das Gerät geladene Treiber. Und da sieht man auch, dass das Device auf ttyAMA0 liegt.
-
@thomas-braun said in Test Adapter Z-Wave 2 v1.10.x:
Nimm den Adapter aus der Adapterliste im Admin.
Hatte ich schon gemacht.
sogar sogar instance weg gemacht und neu gemacht
leider geht es nicht mehr
-
@esmax666 sagte in Test Adapter Z-Wave 2 v1.10.x:
leider geht es nicht mehr
Stimmt dann wohl.
Leider kann man aus deiner 'Fehlerbeschreibung' nichts herauslesen. -
@thomas-braun was kann ich sonst noch als info geben ?
sonst habe ich noch 2 warn und 1 error
info.0 2021-05-16 13:07:15.628 warn (2791) State "info.0.uuid" has no existing object, this might lead to an error in future versions host.raspberrypi 2021-05-16 13:00:08.345 info instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) host.raspberrypi 2021-05-16 13:00:00.042 info instance system.adapter.ical.0 started with pid 5361 zwave2.0 2021-05-16 12:59:53.829 info (5346) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-05-16 12:59:51.487 info instance system.adapter.zwave2.0 started with pid 5346 host.raspberrypi 2021-05-16 12:59:21.429 info Restart adapter system.adapter.zwave2.0 because enabled host.raspberrypi 2021-05-16 12:59:21.428 info instance system.adapter.zwave2.0 terminated with code NaN () host.raspberrypi 2021-05-16 12:59:21.427 warn instance system.adapter.zwave2.0 terminated due to SIGABRT host.raspberrypi 2021-05-16 12:59:21.422 error Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory zwave2.0 2021-05-16 12:45:57.264 info (5176) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-05-16 12:45:55.024 info instance system.adapter.zwave2.0 started with pid 5176 host.raspberrypi 2021-05-16 12:45:24.958 info Restart adapter system.adapter.zwave2.0 because enabled host.raspberrypi 2021-05-16 12:45:24.957 info instance system.adapter.zwave2.0 terminated with code NaN () host.raspberrypi 2021-05-16 12:45:24.956 warn instance system.adapter.zwave2.0 terminated due to SIGABRT host.raspberrypi 2021-05-16 12:45:24.950 error Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory info.0 2021-05-16 12:37:15.604 warn (2791) State "info.0.uuid" has no existing object, this might lead to an error in future versions zwave2.0 2021-05-16 12:32:01.208 info (5010) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-05-16 12:31:58.911 info instance system.adapter.zwave2.0 started with pid 5010 host.raspberrypi 2021-05-16 12:31:28.859 info Restart adapter system.adapter.zwave2.0 because enabled host.raspberrypi 2021-05-16 12:31:28.859 info instance system.adapter.zwave2.0 terminated with code NaN () host.raspberrypi 2021-05-16 12:31:28.858 warn instance system.adapter.zwave2.0 terminated due to SIGABRT host.raspberrypi 2021-05-16 12:31:28.857 error Caught by controller[0]: FATAL ERROR: Ineffective mark-compacts near heap limit Allocation failed - JavaScript heap out of memory -
-
-
@esmax666
Bitte keine Bilderchen posten, KonsolenTEXT in CodeTags eingebettet hier rein. -
@Esmax666 die Datei brauchst du inzwischen nicht mehr manuell bearbeiten. Auf Pi 4 sind das die Schritte, die ausreichen: Konsole auf,
sudo raspi-config- 3 Interface Options
- P6 Serial Port
- "Would you like a login shell to be accessible over serial?" => NO
- "Would you like the serial port hardware to be enabled?" => YES
Danach sollte der Adapter funktionieren, wenn du
/dev/serial0einträgst - ist leider nicht in der Liste zu finden. -
@alcalzone
An den Hardware-Part hatte ich noch gar nicht gedacht, bzw. vorausgesetzt das der natürlich auch aktiviert wurde.Wobei dann /dev/serial0 'nur' ein symlink auf das device node /dev/ttyAMA0 sein dürfte.
-
ok ist jetzt aktviert
und auch neu gestartet
aber immer Driver could not be started
zwave2.0 2021-05-16 15:32:12.067 error (17665) The Z-Wave driver could not be started: Error: No such file or directory, cannot open /dev/serial0 zwave2.0 2021-05-16 15:32:11.921 info (17665) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-05-16 15:32:09.511 info instance system.adapter.zwave2.0 started with pid 17665 host.raspberrypi 2021-05-16 15:32:07.043 info instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) zwave2.0 2021-05-16 15:32:06.372 info (5742) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zwave2.0 2021-05-16 15:32:06.371 info (5742) terminating zwave2.0 2021-05-16 15:32:06.369 info (5742) Shutting down driver... zwave2.0 2021-05-16 15:32:06.367 info (5742) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2021-05-16 15:32:06.367 info stopInstance system.adapter.zwave2.0 send kill signal host.raspberrypi 2021-05-16 15:32:06.359 info stopInstance system.adapter.zwave2.0 (force=false, process=true) host.raspberrypi 2021-05-16 15:30:27.733 info instance system.adapter.ical.0 terminated with code 0 (NO_ERROR) ical.0 2021-05-16 15:30:27.198 info (8661) Terminated (NO_ERROR): Without reason -
@esmax666
Und wenn du das device direkt anrufst? Unter /dev/ttyAMA0Gibt es das Gerät?
ls -la /dev/ttyAMA0 sudo -u iobroker groups -
@thomas-braun said in Probleme mit Serialport bei zwave2:
/dev/ttyAMA0
dann bekomme ich wie davor
zwave2.0 2021-05-16 15:39:28.776 info (15581) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-05-16 15:39:26.309 info instance system.adapter.zwave2.0 started with pid 15581 host.raspberrypi 2021-05-16 15:39:23.743 info instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) zwave2.0 2021-05-16 15:39:23.146 info (17665) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zwave2.0 2021-05-16 15:39:23.145 info (17665) terminating zwave2.0 2021-05-16 15:39:23.143 info (17665) Shutting down driver... host.raspberrypi 2021-05-16 15:39:23.141 info stopInstance system.adapter.zwave2.0 send kill signal zwave2.0 2021-05-16 15:39:23.141 info (17665) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2021-05-16 15:39:23.126 info stopInstance system.adapter.zwave2.0 (force=false, process=true)und als "debug level" bekomme ich das :
zwave2.0 2021-05-16 15:41:19.769 info (24494) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 zwave2.0 2021-05-16 15:41:19.518 debug (24494) statesDB connected zwave2.0 2021-05-16 15:41:19.517 debug (24494) States connected to redis: 127.0.0.1:9000 zwave2.0 2021-05-16 15:41:19.510 debug (24494) States create User PubSub Client zwave2.0 2021-05-16 15:41:19.508 debug (24494) States create System PubSub Client zwave2.0 2021-05-16 15:41:19.501 debug (24494) Redis States: Use Redis connection: 127.0.0.1:9000 zwave2.0 2021-05-16 15:41:19.498 debug (24494) objectDB connected zwave2.0 2021-05-16 15:41:19.469 debug (24494) Objects connected to redis: 127.0.0.1:9001 zwave2.0 2021-05-16 15:41:19.455 debug (24494) Objects client initialize lua scripts zwave2.0 2021-05-16 15:41:19.453 debug (24494) Objects create User PubSub Client zwave2.0 2021-05-16 15:41:19.451 debug (24494) Objects create System PubSub Client zwave2.0 2021-05-16 15:41:19.448 debug (24494) Objects client ready ... initialize now zwave2.0 2021-05-16 15:41:19.402 debug (24494) Redis Objects: Use Redis connection: 127.0.0.1:9001 host.raspberrypi 2021-05-16 15:41:17.450 info instance system.adapter.zwave2.0 started with pid 24494 host.raspberrypi 2021-05-16 15:41:17.338 info "system.adapter.zwave2.0" enabled host.raspberrypi 2021-05-16 15:41:15.669 info instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) host.raspberrypi 2021-05-16 15:41:15.087 info stopInstance system.adapter.zwave2.0 send kill signal zwave2.0 2021-05-16 15:41:15.048 info (22847) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zwave2.0 2021-05-16 15:41:15.046 info (22847) terminating zwave2.0 2021-05-16 15:41:15.044 info (22847) Shutting down driver... zwave2.0 2021-05-16 15:41:15.042 info (22847) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2021-05-16 15:41:15.029 info stopInstance system.adapter.zwave2.0 (force=false, process=true) host.raspberrypi 2021-05-16 15:41:15.027 info "system.adapter.zwave2.0" disabled zwave2.0 2021-05-16 15:40:59.111 info (22847) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 zwave2.0 2021-05-16 15:40:58.808 debug (22847) statesDB connected zwave2.0 2021-05-16 15:40:58.807 debug (22847) States connected to redis: 127.0.0.1:9000 zwave2.0 2021-05-16 15:40:58.795 debug (22847) States create User PubSub Client zwave2.0 2021-05-16 15:40:58.794 debug (22847) States create System PubSub Client zwave2.0 2021-05-16 15:40:58.783 debug (22847) Redis States: Use Redis connection: 127.0.0.1:9000 zwave2.0 2021-05-16 15:40:58.781 debug (22847) objectDB connected zwave2.0 2021-05-16 15:40:58.751 debug (22847) Objects connected to redis: 127.0.0.1:9001 zwave2.0 2021-05-16 15:40:58.737 debug (22847) Objects client initialize lua scripts zwave2.0 2021-05-16 15:40:58.736 debug (22847) Objects create User PubSub Client zwave2.0 2021-05-16 15:40:58.735 debug (22847) Objects create System PubSub Client zwave2.0 2021-05-16 15:40:58.732 debug (22847) Objects client ready ... initialize now zwave2.0 2021-05-16 15:40:58.696 debug (22847) Redis Objects: Use Redis connection: 127.0.0.1:9001 host.raspberrypi 2021-05-16 15:40:56.599 info instance system.adapter.zwave2.0 started with pid 22847 host.raspberrypi 2021-05-16 15:40:56.462 info "system.adapter.zwave2.0" enabled host.raspberrypi 2021-05-16 15:40:50.698 info instance system.adapter.zwave2.0 terminated with code null () host.raspberrypi 2021-05-16 15:40:50.697 warn instance system.adapter.zwave2.0 terminated due to SIGTERM host.raspberrypi 2021-05-16 15:40:50.626 info stopInstance system.adapter.zwave2.0 killing pid 22283 host.raspberrypi 2021-05-16 15:40:49.624 info stopInstance system.adapter.zwave2.0 send kill signal host.raspberrypi 2021-05-16 15:40:49.613 info stopInstance system.adapter.zwave2.0 (force=false, process=true) host.raspberrypi 2021-05-16 15:40:49.613 info "system.adapter.zwave2.0" disabled host.raspberrypi 2021-05-16 15:40:49.345 info instance system.adapter.zwave2.0 started with pid 22283 host.raspberrypi 2021-05-16 15:40:46.840 info instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) zwave2.0 2021-05-16 15:40:46.228 info (15581) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zwave2.0 2021-05-16 15:40:46.226 info (15581) terminating zwave2.0 2021-05-16 15:40:46.225 info (15581) Shutting down driver... zwave2.0 2021-05-16 15:40:46.223 info (15581) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2021-05-16 15:40:46.223 info stopInstance system.adapter.zwave2.0 send kill signal host.raspberrypi 2021-05-16 15:40:46.210 info stopInstance system.adapter.zwave2.0 (force=false, process=true) zwave2.0 2021-05-16 15:39:28.776 info (15581) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 -
ls -la /dev/ttyAMA0 sudo -u iobroker groups -
@thomas-braun said in Probleme mit Serialport bei zwave2:
sudo -u iobroker groups
auch nicht
zwave2.0 2021-05-16 15:44:27.972 info (7201) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 host.raspberrypi 2021-05-16 15:44:25.611 info instance system.adapter.zwave2.0 started with pid 7201 host.raspberrypi 2021-05-16 15:44:25.529 info "system.adapter.zwave2.0" enabled host.raspberrypi 2021-05-16 15:44:24.965 info instance system.adapter.zwave2.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) zwave2.0 2021-05-16 15:44:24.304 info (30224) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zwave2.0 2021-05-16 15:44:24.302 info (30224) terminating zwave2.0 2021-05-16 15:44:24.301 info (30224) Shutting down driver... host.raspberrypi 2021-05-16 15:44:24.299 info stopInstance system.adapter.zwave2.0 send kill signal zwave2.0 2021-05-16 15:44:24.298 info (30224) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2021-05-16 15:44:24.285 info stopInstance system.adapter.zwave2.0 (force=false, process=true) host.raspberrypi 2021-05-16 15:44:24.278 info "system.adapter.zwave2.0" disabled zwave2.0 2021-05-16 15:44:11.075 debug (30224) system.adapter.admin.0: logging true zwave2.0 2021-05-16 15:44:06.538 debug (30224) system.adapter.admin.0: logging false -
@esmax666 Starte den Adapter mal auf der Konsole, da sieht man ggf. mehr:
cd /opt/iobroker/node_modules/iobroker.zwave2 node build/main.js --force --logs -
@alcalzone said in Probleme mit Serialport bei zwave2:
cd /opt/iobroker/node_modules/iobroker.zwave2
node build/main.js --force --logspi@raspberrypi:~ $ cd /opt/iobroker/node_modules/iobroker.zwave2 pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ node build/main.js --force --logs 2021-05-16 16:43:17.078 - info: zwave2.0 (17697) starting. Version 1.9.3 in /opt/iobroker/node_modules/iobroker.zwave2, node: v12.22.1, js-controller: 3.2.16 Logging to file: /opt/iobroker/node_modules/iobroker.zwave2/build/zwavejs_2021-05-16.log 2021-05-16 16:43:17.235 - error: zwave2.0 (17697) The Z-Wave driver could not be started: Error Resource temporarily unavailable Cannot lock port ^C2021-05-16 16:43:47.907 - info: zwave2.0 (17697) Shutting down driver... 2021-05-16 16:43:47.916 - info: zwave2.0 (17697) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason pi@raspberrypi:/opt/iobroker/node_modules/iobroker.zwave2 $ -
@esmax666 sagte in Probleme mit Serialport bei zwave2:
Cannot lock port
Da greift schon irgendwas anderes auf den Port zu.
-
sudo lsof /dev/ttyAMA0
