Installationsanleitung Odroid C2 und Kurzvorstellung

Homoran

~~@Fitti:~~

Die Routine zerstörte mir damals iobroker gänzlich! `
ich habe es letztens auch mal cross-plattformweise gemacht.

Hat geklappt. Allerdings blieben einige Datenpunkte von system.host.xxx übrig, da der neue system.host anders hieß.

da gibt es irgendwo in den Tiefen des Forums einen Befehl wie systemhost=this, der hätte das evtl. korrigiert.

Aber alles wird nicht kopiert!

History-Daten von Datenpunkten waren IMHO nicht mehr drin.

Aber alle Views.

Gruß

Rainer

MrLee

Moin!

So, der C2 ist seit getsern nacht installiert und anbei mal die ersten Erfahrungen:

<u>Installation:</u>

alles nach Anleitung oben, allerdings:

Punkt 7) durchgeführt in /interfaces.d/eth0

-> läuft, feste IP ok

zusätzlich:

in der boot.ini die option nographics auf 1 gesetzt = 300MB mehr Ram (Achtung: nur headless!)

die client-Hosts wieder verbunden und schlafen gegangen. Alles eigentlich extrem streßfrei (Dank der tollen Anleitung.

<u>Leistungsbewertung:</u>

Habe leider noch keine wirklichen Langzeitdaten (werde ich nachtragen) aber:

Speicher satt (stets ca. 800MB im cache…Luxus!)
Performance: Auslastung zwischn 0.1-und0.4
Ethernet: Backup aufs NAS macht jetzt Spaß (vorher ca. 2,4MB/s..jetzt ca. 8 MB/s)
Temperatur: Handwarm...der RasPi3 im selben Setup wurde deutlich wärmer.

Ein Load-Diagramm reiche ich noch nach da auf Host3 der IOBroker anscheinend alle x Stunden neustartete und daher noch nicht aussagekräftiges da ist...

Vorläufiges Fazit:

der Odroid ist stressfrei
die Leistung für IOBroker ist locker Faktor 3
eine mittelgroße Installation auf dem C2 Standalone zu fahren halte ich für empfehlenswert (im Vergleich zum Raspi)

bis denne

Mr.Lee

Lenny.CB

so, gestern noch einmal alles sauber installiert und backup/restore versucht.

Backup auf dem BananaPi dauerte mehrere Minuten… (hatte gelesen das es wohl sehr fix geht, im Sekundenbereich)

dann auf dem neuen System einen Ordner Backup (/opt/iobroker/backup) angelegt und das File rein kopiert.

War bei mir ca.13MB groß. (auch wieder gelesen das es recht klein sein sollte)

Dann die Befehle für Restore und im Admin beobachtet und gewartet.

Beim ersten Adapter blieb der blaue Balken bei der hälft stehen und im Log passierte auch nichts mehr.

Resultat: System blieb hängen...

Mal schauen ob ich das heut noch einmal versuche oder alles einzeln installiere.

MrLee

Moin!

Verusch mal wie in der anleitung:

odroid ioBroker installieren

stoppen

vom alten System rüberkopieren

!im iobroker-Ordner! auf dem odroid ./reinstall.sh

ausführen.

Hat bei mir (bis auf die Dauer) wunderbar geklappt.

Ganz wichtig: im iobroker ordner ausführen….!!!

MrLee

Moin!

Leider habe ich mit der Ubuntu INstallation noch meine Probleme…immer wenn ich einen Adapter updaten will kommt ein Fehler:

$ ./iobroker add dwd
npm install iobroker.dwd --production --prefix "/usr/local/iobroker" (System call)
In file included from ../src/bufferutil.cc:16:0:../node_modules/nan/nan.h:261:25: error: redefinition of ‘template <class t="">v8::Local _NanEnsureLocal(v8::Local)’
 NAN_INLINE v8::Local _NanEnsureLocal(v8::Local val) {
                         ^
../node_modules/nan/nan.h:256:25: note: ‘template <class t="">v8::Local _NanEnsureLocal(v8::Handle)’ previously declared here
 NAN_INLINE v8::Local _NanEnsureLocal(v8::Handle val) {
                         ^

../node_modules/nan/nan.h:661:13: error: ‘node::smalloc’ has not been declared     , node::smalloc::FreeCallback callback
             ^
../node_modules/nan/nan.h:661:35: error: expected ‘,’ or ‘...’ before ‘callback’
     , node::smalloc::FreeCallback callback
                                   ^

../node_modules/nan/nan.h: In function ‘v8::Local <v8::object>NanNewBufferHandle(char*, size_t, int)’:../node_modules/nan/nan.h:665:50: error: ‘callback’ was not declared in this scope
         v8::Isolate::GetCurrent(), data, length, callback, hint);
                                                  ^
../node_modules/nan/nan.h:665:60: error: ‘hint’ was not declared in this scope
         v8::Isolate::GetCurrent(), data, length, callback, hint);
                                                            ^
../node_modules/nan/nan.h: In function ‘v8::Local <v8::object>NanNewBufferHandle(const char*, uint32_t)’:
../node_modules/nan/nan.h:672:67: error: no matching function for call to ‘New(v8::Isolate*, const char*&, uint32_t&)’
     return node::Buffer::New(v8::Isolate::GetCurrent(), data, size);
                                                                   ^
In file included from ../src/bufferutil.cc:10:0:
/usr/include/nodejs/src/node_buffer.h:31:40: note: candidate: v8::MaybeLocal <v8::object>node::Buffer::New(v8::Isolate*, v8::Local<v8::string>, node::encoding) <near match="">
 NODE_EXTERN v8::MaybeLocal <v8::object>New(v8::Isolate* isolate,
                                        ^
/usr/include/nodejs/src/node_buffer.h:31:40: note:   conversion of argument 3 would be ill-formed:
In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:672:67: error: invalid conversion from ‘uint32_t {aka unsigned int}’ to ‘node::encoding’ [-fpermissive]
     return node::Buffer::New(v8::Isolate::GetCurrent(), data, size);
                                                                   ^
In file included from ../src/bufferutil.cc:10:0:
/usr/include/nodejs/src/node_buffer.h:43:40: note: candidate: v8::MaybeLocal <v8::object>node::Buffer::New(v8::Isolate*, char*, size_t) <near match="">
 NODE_EXTERN v8::MaybeLocal <v8::object>New(v8::Isolate* isolate,
                                        ^
/usr/include/nodejs/src/node_buffer.h:43:40: note:   conversion of argument 2 would be ill-formed:
In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:672:67: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive]
     return node::Buffer::New(v8::Isolate::GetCurrent(), data, size);
                                                                   ^

../node_modules/nan/nan.h: In function ‘v8::Local <v8::object>NanNewBufferHandle(uint32_t)’:../node_modules/nan/nan.h:676:29: error: could not convert ‘node::Buffer::New(v8::Isolate::GetCurrent(), ((size_t)size))’ from ‘v8::MaybeLocal<v8::object>’ to ‘v8::Local<v8::object>’
     return node::Buffer::New(v8::Isolate::GetCurrent(), size);
                             ^
../node_modules/nan/nan.h: In function ‘v8::Local <v8::object>NanBufferUse(char*, uint32_t)’:
../node_modules/nan/nan.h:683:12: error: ‘Use’ is not a member of ‘node::Buffer’
     return node::Buffer::Use(v8::Isolate::GetCurrent(), data, size);
            ^

make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Error 1
gyp
 ERR! build error 
gyp ERR! stack Error: `make` failed with exit code: 2
gyp ERR! stack     at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:269:23)
gyp ERR! stack
     at emitTwo (events.js:87:13)gyp ERR! stack     at ChildProcess.emit (events.js:172:7)
gyp ERR!
 stack     at Process.ChildProcess._handle.onexit (internal/child_process.js:200:12)gyp ERR! System Linux 3.14.79-109

gyp ERR! command "/usr/bin/nodejs" "/usr/bin/node-gyp" "rebuild"gyp ERR! cwd /usr/local/iobroker/node_modules/bufferutil

gyp ERR! node -v v4.2.6gyp ERR! node-gyp -v v3.0.3

gyp ERR! not ok 
npm

WARN 
install:bufferutil@1.1.0
 bufferutil@1.1.0 install: `node-gyp rebuild`
npm 
WARN install:bufferutil@1.1.0
 Exit status 1
npm WARN babel-eslint@5.0.4 requires a peer of eslint@<2.3.0 but none was installed.
host.RasPi1 install adapter dwd
npm install --production (System call) in "/usr/local/iobroker/node_modules/iobroker.dwd"
npm

ERR! Linux 3.14.79-109
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "--production"npm ERR! node v4.2.6
npm 
ERR! npm  v3.5.2

npm ERR! Cannot read property 'target' of nullnpm ERR! 
npm ERR! If you need help, you may report this error at:

npm ERR!     <https: github.com/npm/issues="">

npm
 ERR! Please include the following file with any support request:npm ERR!     /usr/local/iobroker/node_modules/iobroker.dwd/npm-debug.log

Cannot install iobroker.dwd: 1
ERROR: process exited with code 25</https:></v8::object></v8::object></v8::object></v8::object></v8::object></near></v8::object></v8::object></near></v8::string></v8::object></v8::object></v8::object></class></class>

Der Adapter wird trotzdem aktualisiert…

Weiß jemand rat?

bis denne

MrLee

jawr

Ich wollte auch mal meine Erfahrungen mit dem Odroid C2 kurz schildern. Ich bin sehr zufrieden mit dem kleinen Kraftprotz, ich habe bislang keine Skripte im iobroker laufen sondern nur eine Visualisierung und ein paar Adapter installiert. Auslastung ist quasi nicht vorhanden auf dem System. Ich kann mir aber ehrlich gesagt nicht vorstellen, was die CPU wirklich auslasten sollte. Ich nutze für den Odroid ein spezielles Image für den C2, es ist ein debian jessie. In der Grundinstallation wird auch kein X Server (also keine Grafik) mitinstalliert. Diese ist für den Betrieb von iobroker auch nicht nötig und spart somit nochmal reichlich Ressourcen. Image is hier zu finden:

http://forum.odroid.com/viewtopic.php?t=19403

Ich nutze das Gerät zusätzlich als VPN Server und bei Bedarf starte ich den X Server mit kodi als Entertainment System. Hauptsächlich streame ich damit Fernsehen von meiner Enigma2 Box. Läuft perfekt. Da das genannte Image mit dem dort installierbaren kodi speziell für den C2 kompiliert wurde, ist auch die Hardwareunterstützung vorhanden. Streaming von mkv (FULLHD) belastet die CPU somit auch kaum. Ich kann den C2 eigentlich nur empfehlen. Die Möglichkeit des Einsatzes der EMMC Karte, sowie das Gigabit Lan und die höhere Taktfrequenz hat für mich den Ausschalg gegeben, keinen Pi3 zu kaufen. Wer sich Gedanken macht das es zu wenig Support für das Gerät gibt, macht sich meines Erachtens umsonst Sorgen. Für mich war bislang alles zu lösen, obwohl die Pi Gemeinde natürlich viel grösser ist.

Gruß,

jawr

Meistertr

ich setze gerade mein neues System auf, habe nun festgestellt, dass nach der Anleitung in meinen node Ordner unter /opt/iobroker sehr viele Ordner sind, das war wahrscheinlich mein Fehler oder? vermutlich weil ich bei der node Installation schon in dem ordner war? oder muss das so?

Homoran

Wenn du den Ordner /opt/iobroker/node_modules meinst und eine neuere nodejs / npm Version einsetzst, dann ist alles ok!

Gruß

Rainer

Meistertr

Ich glaube ich habe 6 installiert

Gesendet von meinem E5823 mit Tapatalk

Meistertr

ich kann irgendwie keine Adapter installieren, discovery ging, der hat auch einige installiert aber alle anderen kommt folgende fehlermeldung:

$ ./iobroker add email
npm install iobroker.email --production --prefix "/opt/iobroker" (System call)
npm
 WARN 
lifecycle
 iobroker@0.9.0~install: cannot run in wd %s %s (wd=%s) iobroker@0.9.0 node lib/setup.js /opt/iobroker/node_modules/iobroker
host.smarthome install adapter email
npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.email"
npm
 ERR! Linux 3.14.79-109
npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "--production"
npm ERR! node v4.2.6npm ERR! npm  v3.5.2

npm ERR! Cannot read property 'target' of nullnpm ERR! 
npm ERR! If you need help, you may report this error at:
npm
 ERR!     <https: github.com/npm/issues="">

npm ERR! Please include the following file with any support request:npm ERR!     /opt/iobroker/node_modules/iobroker.email/npm-debug.log

Cannot install iobroker.email: 1
ERROR: process exited with code 25</https:>

jemand ne idee?

Homoran

~~@Meistertr:~~

aber alle anderen kommt folgende fehlermeldung:

…

ERROR: process exited with code 25

jemand ne idee? `

Hast du mal nachgesehen ob der Adapter trotzdem funktioniert?

War bei mir bei .vis mit dieser Meldung so - upgrade hat trotzdem geklappt.

Gruß

Rainer

Meistertr

Ne er wurde nicht installiert, habe nun alles nochmal aufgesetzt mit node 4… jetzt läuft alles wunderbar

Homoran

Seltsam.

Bei mir läuft alles unter nodejs 6.xx und sogar unter nodejs 7.xx mit Debian 9 :D

Gruß

Rainer

Lenny.CB

hallo zusammen,

musste grad mal wieder mein System neu aufsetzen. Alles wieder nach der Anleitung im ersten Post gemacht.

Läuft leider nicht mehr so problemlos durch.

node -v –> 6.11.0

npm -v --> 5.0.3

kann mir mal jemand sagen was mir diese Meldungen aussagen?

! root@odroid64:~# sudo mkdir /opt/iobroker
! root@odroid64:~# sudo chmod 777 /opt/iobroker
! root@odroid64:~# cd /opt/iobroker
! root@odroid64:/opt/iobroker# sudo npm install iobroker –unsafe-perm
! > iobroker@1.0.0 install /opt/iobroker/node_modules/iobroker
! > node lib/setup.js
! npm install iobroker.discovery --production --prefix /opt/iobroker
! node-pre-gyp info it worked if it ends with ok
! node-pre-gyp verb cli [ '/usr/bin/nodejs',
! node-pre-gyp verb cli '/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp',
! node-pre-gyp verb cli 'install',
! node-pre-gyp verb cli '--fallback-to-build' ]
! node-pre-gyp info using node-pre-gyp@0.6.32
! node-pre-gyp info using node@6.11.0 | linux | arm64
! node-pre-gyp verb command install []
! node-pre-gyp info check checked for "/opt/iobroker/node_modules/serialport/build/Release/serialport.node" (not found)
! node-pre-gyp http GET https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp http 404 https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@6.11.0 (node-v48 ABI) (falling back to source compile with node-gyp)
! node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp verb command build [ 'rebuild' ]
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "–fallback-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport" "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
! gyp ERR! cwd /opt/iobroker/node_modules/serialport
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! node-pre-gyp ERR! build error
! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/nodejs /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_path=/opt/iobroker/node_modules/serialport/build/Release' (1)
! node-pre-gyp ERR! stack at ChildProcess. <anonymous>(/opt/iobroker/node_modules/serialport/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
! node-pre-gyp ERR! stack at emitTwo (events.js:106:13)
! node-pre-gyp ERR! stack at ChildProcess.emit (events.js:191:7)
! node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:891:16)
! node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:226:5)
! node-pre-gyp ERR! System Linux 3.14.65-73
! node-pre-gyp ERR! command "/usr/bin/nodejs" "/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/serialport
! node-pre-gyp ERR! node -v v6.11.0
! node-pre-gyp ERR! node-pre-gyp -v v0.6.32
! node-pre-gyp ERR! not ok
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/mdns
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! npm WARN saveError ENOENT: no such file or directory, open '/opt/iobroker/package.json'
! npm ERR! Cannot read property 'type' of undefined
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2017-06-15T07_29_58_853Z-debug.log
! npm install iobroker.admin --production --prefix /opt/iobroker
! node-pre-gyp info it worked if it ends with ok
! node-pre-gyp verb cli [ '/usr/bin/nodejs',
! node-pre-gyp verb cli '/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp',
! node-pre-gyp verb cli 'install',
! node-pre-gyp verb cli '--fallback-to-build' ]
! node-pre-gyp info using node-pre-gyp@0.6.32
! node-pre-gyp info using node@6.11.0 | linux | arm64
! node-pre-gyp verb command install []
! node-pre-gyp info check checked for "/opt/iobroker/node_modules/serialport/build/Release/serialport.node" (not found)
! node-pre-gyp http GET https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp http 404 https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@6.11.0 (node-v48 ABI) (falling back to source compile with node-gyp)
! node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp verb command build [ 'rebuild' ]
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "–fallback-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport" "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
! gyp ERR! cwd /opt/iobroker/node_modules/serialport
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! node-pre-gyp ERR! build error
! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/nodejs /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_path=/opt/iobroker/node_modules/serialport/build/Release' (1)
! node-pre-gyp ERR! stack at ChildProcess. <anonymous>(/opt/iobroker/node_modules/serialport/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
! node-pre-gyp ERR! stack at emitTwo (events.js:106:13)
! node-pre-gyp ERR! stack at ChildProcess.emit (events.js:191:7)
! node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:891:16)
! node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:226:5)
! node-pre-gyp ERR! System Linux 3.14.65-73
! node-pre-gyp ERR! command "/usr/bin/nodejs" "/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/serialport
! node-pre-gyp ERR! node -v v6.11.0
! node-pre-gyp ERR! node-pre-gyp -v v0.6.32
! node-pre-gyp ERR! not ok
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/mdns
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! npm WARN saveError ENOENT: no such file or directory, open '/opt/iobroker/package.json'
! npm ERR! Cannot read property 'type' of undefined
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2017-06-15T07_31_06_302Z-debug.log
! npm install iobroker.js-controller --production --prefix /opt/iobroker
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/ursa
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/unix-dgram
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! node-pre-gyp info it worked if it ends with ok
! node-pre-gyp verb cli [ '/usr/bin/nodejs',
! node-pre-gyp verb cli '/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp',
! node-pre-gyp verb cli 'install',
! node-pre-gyp verb cli '--fallback-to-build' ]
! node-pre-gyp info using node-pre-gyp@0.6.32
! node-pre-gyp info using node@6.11.0 | linux | arm64
! node-pre-gyp verb command install []
! node-pre-gyp info check checked for "/opt/iobroker/node_modules/serialport/build/Release/serialport.node" (not found)
! node-pre-gyp http GET https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp http 404 https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@6.11.0 (node-v48 ABI) (falling back to source compile with node-gyp)
! node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp verb command build [ 'rebuild' ]
! gyp info it worked if it ends with ok
! gyp verb cli [ '/usr/bin/nodejs',
! gyp verb cli '/opt/iobroker/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js',
! gyp verb cli 'clean' ]
! gyp info using node-gyp@3.6.0
! gyp info using node@6.11.0 | linux | arm64
! gyp verb command clean []
! gyp verb clean removing "build" directory
! gyp info ok
! gyp info it worked if it ends with ok
! gyp verb cli [ '/usr/bin/nodejs',
! gyp verb cli '/opt/iobroker/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js',
! gyp verb cli 'configure',
! gyp verb cli '–fallback-to-build',
! gyp verb cli '--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node',
! gyp verb cli '--module_name=serialport',
! gyp verb cli '--module_path=/opt/iobroker/node_modules/serialport/build/Release' ]
! gyp info using node-gyp@3.6.0
! gyp info using node@6.11.0 | linux | arm64
! gyp verb command configure []
! gyp verb check python checking for Python executable "python2" in the PATH
! gyp verb which failed Error: not found: python2
! gyp verb which failed at getNotFoundError (/opt/iobroker/node_modules/npm/node_modules/which/which.js:14:12)
! gyp verb which failed at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:19)
! gyp verb which failed at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp verb which failed at FSReqWrap.oncomplete (fs.js:123:15)
! gyp verb which failed python2 { Error: not found: python2
! gyp verb which failed at getNotFoundError (/opt/iobroker/node_modules/npm/node_modules/which/which.js:14:12)
! gyp verb which failed at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:19)
! gyp verb which failed at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp verb which failed at FSReqWrap.oncomplete (fs.js:123:15) code: 'ENOENT' }
! gyp verb check python checking for Python executable "python" in the PATH
! gyp verb which failed Error: not found: python
! gyp verb which failed at getNotFoundError (/opt/iobroker/node_modules/npm/node_modules/which/which.js:14:12)
! gyp verb which failed at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:19)
! gyp verb which failed at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp verb which failed at FSReqWrap.oncomplete (fs.js:123:15)
! gyp verb which failed python { Error: not found: python
! gyp verb which failed at getNotFoundError (/opt/iobroker/node_modules/npm/node_modules/which/which.js:14:12)
! gyp verb which failed at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:19)
! gyp verb which failed at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp verb which failed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp verb which failed at FSReqWrap.oncomplete (fs.js:123:15) code: 'ENOENT' }
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/opt/iobroker/node_modules/npm/node_modules/node-gyp/lib/configure.js:482:19)
! gyp ERR! stack at Object. <anonymous>(/opt/iobroker/node_modules/npm/node_modules/node-gyp/lib/configure.js:396:16)
! gyp ERR! stack at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:16)
! gyp ERR! stack at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp ERR! stack at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp ERR! stack at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp ERR! stack at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/opt/iobroker/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport" "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
! gyp ERR! cwd /opt/iobroker/node_modules/serialport
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.0
! gyp ERR! not ok
! node-pre-gyp ERR! build error
! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/nodejs /opt/iobroker/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_path=/opt/iobroker/node_modules/serialport/build/Release' (1)
! node-pre-gyp ERR! stack at ChildProcess. <anonymous>(/opt/iobroker/node_modules/serialport/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
! node-pre-gyp ERR! stack at emitTwo (events.js:106:13)
! node-pre-gyp ERR! stack at ChildProcess.emit (events.js:191:7)
! node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:891:16)
! node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:226:5)
! node-pre-gyp ERR! System Linux 3.14.65-73
! node-pre-gyp ERR! command "/usr/bin/nodejs" "/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/serialport
! node-pre-gyp ERR! node -v v6.11.0
! node-pre-gyp ERR! node-pre-gyp -v v0.6.32
! node-pre-gyp ERR! not ok
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/mdns
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! npm WARN saveError ENOENT: no such file or directory, open '/opt/iobroker/package.json'
! npm ERR! Cannot read property 'type' of undefined
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2017-06-15T07_33_53_839Z-debug.log
! Write "./iobroker start" to start the ioBroker
! /usr/bin/env: ‘node\r’: No such file or directory
! Auto-start was enabled. Write "update-rc.d -f iobroker.sh remove" to disable auto-start
! iobroker is started. Go to "http://ip-addr:8081" to open the admin UI.
! npm notice created a lockfile as package-lock.json. You should commit this file.
! npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/package.json'
! npm WARN iobroker No description
! npm WARN iobroker No repository field.
! npm WARN iobroker No README data
! npm WARN iobroker No license field.
! + iobroker@1.0.0
! added 46 packages in 330.773s
! root@odroid64:/opt/iobroker# ^C
! root@odroid64:/opt/iobroker# ./iobroker start
! Starting iobroker controller daemon...
! iobroker controller daemon started. PID: 863
! root@odroid64:/opt/iobroker#</anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous>

Dutchman

Ich sehe nur ein paar Fehler meinte dass dies bekannt ist bei node 6 aber keine negativen Effekt hat

~Dutch

–-----------------------

Send from mobile device

Lenny.CB

~~@Dutchman:~~

Ich sehe nur ein paar Fehler meinte dass dies bekannt ist bei node 6 aber keine negativen Effekt hat `

aber schön ist das doch auch nicht…

guenni71

Hallo Leute,

nachdem meine SD Karte jetzt hin war habe ich was neues gesucht.

Ich habe mir auch den Odroid c2 geholt, Installation habe ich nach der oberen Anleirung gemacht

hat gleich geklappt ioBroker läuft jedoch komme ich bei zwei Sachen nicht weiter.

Ich habe den Hostnamen in der Datei mit dem nano editor geändert

aber wie lautet das passwort ich habe odroid probiert hat aber nicht geklappt

Und ich nutze eine 32GB emmc Karte ich finde nichts wie ich die karte auf die ganze Größe setze.

Gruß Günther

KaFaBe

Am Wochenende kommt mein Odroid C2 an.

Kann ich iobroker auch auf dem neusten Ubuntu Image 18.04 für den Odroid installieren?

http://east.us.odroid.in/?directory=.%2 … 8.04lts%2F

Community Forum

NEWS

Installationsanleitung Odroid C2 und Kurzvorstellung

Support us

589

32.7k

82.6k

1.3m