NEWS
Installationsanleitung Odroid C2 und Kurzvorstellung
-
Wenn du den Ordner /opt/iobroker/node_modules meinst und eine neuere nodejs / npm Version einsetzst, dann ist alles ok!
Gruß
Rainer
-
ich kann irgendwie keine Adapter installieren, discovery ging, der hat auch einige installiert aber alle anderen kommt folgende fehlermeldung:
$ ./iobroker add email npm install iobroker.email --production --prefix "/opt/iobroker" (System call) npm WARN lifecycle iobroker@0.9.0~install: cannot run in wd %s %s (wd=%s) iobroker@0.9.0 node lib/setup.js /opt/iobroker/node_modules/iobroker host.smarthome install adapter email npm install --production (System call) in "/opt/iobroker/node_modules/iobroker.email" npm ERR! Linux 3.14.79-109 npm ERR! argv "/usr/bin/nodejs" "/usr/bin/npm" "install" "--production" npm ERR! node v4.2.6npm ERR! npm v3.5.2 npm ERR! Cannot read property 'target' of nullnpm ERR! npm ERR! If you need help, you may report this error at: npm ERR! <https: github.com/npm/issues=""> npm ERR! Please include the following file with any support request:npm ERR! /opt/iobroker/node_modules/iobroker.email/npm-debug.log Cannot install iobroker.email: 1 ERROR: process exited with code 25</https:>jemand ne idee?
-
aber alle anderen kommt folgende fehlermeldung:
…
ERROR: process exited with code 25
jemand ne idee? `
Hast du mal nachgesehen ob der Adapter trotzdem funktioniert?
War bei mir bei .vis mit dieser Meldung so - upgrade hat trotzdem geklappt.
Gruß
Rainer
-
Seltsam.
Bei mir läuft alles unter nodejs 6.xx und sogar unter nodejs 7.xx mit Debian 9 :D
Gruß
Rainer
-
hallo zusammen,
musste grad mal wieder mein System neu aufsetzen. Alles wieder nach der Anleitung im ersten Post gemacht.
Läuft leider nicht mehr so problemlos durch.
node -v –> 6.11.0
npm -v --> 5.0.3
kann mir mal jemand sagen was mir diese Meldungen aussagen?
! root@odroid64:~# sudo mkdir /opt/iobroker
! root@odroid64:~# sudo chmod 777 /opt/iobroker
! root@odroid64:~# cd /opt/iobroker
! root@odroid64:/opt/iobroker# sudo npm install iobroker –unsafe-perm
! > iobroker@1.0.0 install /opt/iobroker/node_modules/iobroker
! > node lib/setup.js
! npm install iobroker.discovery --production --prefix /opt/iobroker
! node-pre-gyp info it worked if it ends with ok
! node-pre-gyp verb cli [ '/usr/bin/nodejs',
! node-pre-gyp verb cli '/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp',
! node-pre-gyp verb cli 'install',
! node-pre-gyp verb cli '--fallback-to-build' ]
! node-pre-gyp info using node-pre-gyp@0.6.32
! node-pre-gyp info using node@6.11.0 | linux | arm64
! node-pre-gyp verb command install []
! node-pre-gyp info check checked for "/opt/iobroker/node_modules/serialport/build/Release/serialport.node" (not found)
! node-pre-gyp http GET https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp http 404 https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@6.11.0 (node-v48 ABI) (falling back to source compile with node-gyp)
! node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp verb command build [ 'rebuild' ]
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "–fallback-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport" "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
! gyp ERR! cwd /opt/iobroker/node_modules/serialport
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! node-pre-gyp ERR! build error
! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/nodejs /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_path=/opt/iobroker/node_modules/serialport/build/Release' (1)
! node-pre-gyp ERR! stack at ChildProcess. <anonymous>(/opt/iobroker/node_modules/serialport/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
! node-pre-gyp ERR! stack at emitTwo (events.js:106:13)
! node-pre-gyp ERR! stack at ChildProcess.emit (events.js:191:7)
! node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:891:16)
! node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:226:5)
! node-pre-gyp ERR! System Linux 3.14.65-73
! node-pre-gyp ERR! command "/usr/bin/nodejs" "/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/serialport
! node-pre-gyp ERR! node -v v6.11.0
! node-pre-gyp ERR! node-pre-gyp -v v0.6.32
! node-pre-gyp ERR! not ok
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/mdns
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! npm WARN saveError ENOENT: no such file or directory, open '/opt/iobroker/package.json'
! npm ERR! Cannot read property 'type' of undefined
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2017-06-15T07_29_58_853Z-debug.log
! npm install iobroker.admin --production --prefix /opt/iobroker
! node-pre-gyp info it worked if it ends with ok
! node-pre-gyp verb cli [ '/usr/bin/nodejs',
! node-pre-gyp verb cli '/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp',
! node-pre-gyp verb cli 'install',
! node-pre-gyp verb cli '--fallback-to-build' ]
! node-pre-gyp info using node-pre-gyp@0.6.32
! node-pre-gyp info using node@6.11.0 | linux | arm64
! node-pre-gyp verb command install []
! node-pre-gyp info check checked for "/opt/iobroker/node_modules/serialport/build/Release/serialport.node" (not found)
! node-pre-gyp http GET https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp http 404 https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@6.11.0 (node-v48 ABI) (falling back to source compile with node-gyp)
! node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp verb command build [ 'rebuild' ]
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "–fallback-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport" "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
! gyp ERR! cwd /opt/iobroker/node_modules/serialport
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! node-pre-gyp ERR! build error
! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/nodejs /usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_path=/opt/iobroker/node_modules/serialport/build/Release' (1)
! node-pre-gyp ERR! stack at ChildProcess. <anonymous>(/opt/iobroker/node_modules/serialport/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
! node-pre-gyp ERR! stack at emitTwo (events.js:106:13)
! node-pre-gyp ERR! stack at ChildProcess.emit (events.js:191:7)
! node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:891:16)
! node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:226:5)
! node-pre-gyp ERR! System Linux 3.14.65-73
! node-pre-gyp ERR! command "/usr/bin/nodejs" "/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/serialport
! node-pre-gyp ERR! node -v v6.11.0
! node-pre-gyp ERR! node-pre-gyp -v v0.6.32
! node-pre-gyp ERR! not ok
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/mdns
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! npm WARN saveError ENOENT: no such file or directory, open '/opt/iobroker/package.json'
! npm ERR! Cannot read property 'type' of undefined
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2017-06-15T07_31_06_302Z-debug.log
! npm install iobroker.js-controller --production --prefix /opt/iobroker
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/ursa
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/unix-dgram
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! node-pre-gyp info it worked if it ends with ok
! node-pre-gyp verb cli [ '/usr/bin/nodejs',
! node-pre-gyp verb cli '/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp',
! node-pre-gyp verb cli 'install',
! node-pre-gyp verb cli '--fallback-to-build' ]
! node-pre-gyp info using node-pre-gyp@0.6.32
! node-pre-gyp info using node@6.11.0 | linux | arm64
! node-pre-gyp verb command install []
! node-pre-gyp info check checked for "/opt/iobroker/node_modules/serialport/build/Release/serialport.node" (not found)
! node-pre-gyp http GET https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp http 404 https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Tried to download(404): https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp ERR! Pre-built binaries not found for serialport@4.0.7 and node@6.11.0 (node-v48 ABI) (falling back to source compile with node-gyp)
! node-pre-gyp http 404 status code downloading tarball https://github.com/EmergingTechnologyAd ... m64.tar.gz
! node-pre-gyp verb command build [ 'rebuild' ]
! gyp info it worked if it ends with ok
! gyp verb cli [ '/usr/bin/nodejs',
! gyp verb cli '/opt/iobroker/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js',
! gyp verb cli 'clean' ]
! gyp info using node-gyp@3.6.0
! gyp info using node@6.11.0 | linux | arm64
! gyp verb command clean []
! gyp verb clean removing "build" directory
! gyp info ok
! gyp info it worked if it ends with ok
! gyp verb cli [ '/usr/bin/nodejs',
! gyp verb cli '/opt/iobroker/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js',
! gyp verb cli 'configure',
! gyp verb cli '–fallback-to-build',
! gyp verb cli '--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node',
! gyp verb cli '--module_name=serialport',
! gyp verb cli '--module_path=/opt/iobroker/node_modules/serialport/build/Release' ]
! gyp info using node-gyp@3.6.0
! gyp info using node@6.11.0 | linux | arm64
! gyp verb command configure []
! gyp verb check python checking for Python executable "python2" in the PATH
! gyp verbwhichfailed Error: not found: python2
! gyp verbwhichfailed at getNotFoundError (/opt/iobroker/node_modules/npm/node_modules/which/which.js:14:12)
! gyp verbwhichfailed at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:19)
! gyp verbwhichfailed at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp verbwhichfailed at FSReqWrap.oncomplete (fs.js:123:15)
! gyp verbwhichfailed python2 { Error: not found: python2
! gyp verbwhichfailed at getNotFoundError (/opt/iobroker/node_modules/npm/node_modules/which/which.js:14:12)
! gyp verbwhichfailed at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:19)
! gyp verbwhichfailed at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp verbwhichfailed at FSReqWrap.oncomplete (fs.js:123:15) code: 'ENOENT' }
! gyp verb check python checking for Python executable "python" in the PATH
! gyp verbwhichfailed Error: not found: python
! gyp verbwhichfailed at getNotFoundError (/opt/iobroker/node_modules/npm/node_modules/which/which.js:14:12)
! gyp verbwhichfailed at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:19)
! gyp verbwhichfailed at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp verbwhichfailed at FSReqWrap.oncomplete (fs.js:123:15)
! gyp verbwhichfailed python { Error: not found: python
! gyp verbwhichfailed at getNotFoundError (/opt/iobroker/node_modules/npm/node_modules/which/which.js:14:12)
! gyp verbwhichfailed at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:19)
! gyp verbwhichfailed at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp verbwhichfailed at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp verbwhichfailed at FSReqWrap.oncomplete (fs.js:123:15) code: 'ENOENT' }
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/opt/iobroker/node_modules/npm/node_modules/node-gyp/lib/configure.js:482:19)
! gyp ERR! stack at Object. <anonymous>(/opt/iobroker/node_modules/npm/node_modules/node-gyp/lib/configure.js:396:16)
! gyp ERR! stack at F (/opt/iobroker/node_modules/npm/node_modules/which/which.js:69:16)
! gyp ERR! stack at E (/opt/iobroker/node_modules/npm/node_modules/which/which.js:81:29)
! gyp ERR! stack at /opt/iobroker/node_modules/npm/node_modules/which/which.js:90:16
! gyp ERR! stack at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/index.js:44:5
! gyp ERR! stack at /opt/iobroker/node_modules/npm/node_modules/which/node_modules/isexe/access.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/opt/iobroker/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "configure" "--fallback-to-build" "--module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node" "--module_name=serialport" "--module_path=/opt/iobroker/node_modules/serialport/build/Release"
! gyp ERR! cwd /opt/iobroker/node_modules/serialport
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.0
! gyp ERR! not ok
! node-pre-gyp ERR! build error
! node-pre-gyp ERR! stack Error: Failed to execute '/usr/bin/nodejs /opt/iobroker/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js configure --fallback-to-build --module=/opt/iobroker/node_modules/serialport/build/Release/serialport.node --module_name=serialport --module_path=/opt/iobroker/node_modules/serialport/build/Release' (1)
! node-pre-gyp ERR! stack at ChildProcess. <anonymous>(/opt/iobroker/node_modules/serialport/node_modules/node-pre-gyp/lib/util/compile.js:83:29)
! node-pre-gyp ERR! stack at emitTwo (events.js:106:13)
! node-pre-gyp ERR! stack at ChildProcess.emit (events.js:191:7)
! node-pre-gyp ERR! stack at maybeClose (internal/child_process.js:891:16)
! node-pre-gyp ERR! stack at Process.ChildProcess._handle.onexit (internal/child_process.js:226:5)
! node-pre-gyp ERR! System Linux 3.14.65-73
! node-pre-gyp ERR! command "/usr/bin/nodejs" "/opt/iobroker/node_modules/serialport/node_modules/.bin/node-pre-gyp" "install" "--fallback-to-build"
! node-pre-gyp ERR! cwd /opt/iobroker/node_modules/serialport
! node-pre-gyp ERR! node -v v6.11.0
! node-pre-gyp ERR! node-pre-gyp -v v0.6.32
! node-pre-gyp ERR! not ok
! gyp ERR! configure error
! gyp ERR! stack Error: Can't find Python executable "python", you can set the PYTHON env variable.
! gyp ERR! stack at Object.failNoPython (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:483:19)
! gyp ERR! stack at Object. <anonymous>(/usr/lib/node_modules/npm/node_modules/node-gyp/lib/configure.js:397:16)
! gyp ERR! stack at F (/usr/lib/node_modules/npm/node_modules/which/which.js:68:16)
! gyp ERR! stack at E (/usr/lib/node_modules/npm/node_modules/which/which.js:80:29)
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/which.js:89:16
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/index.js:42:5
! gyp ERR! stack at /usr/lib/node_modules/npm/node_modules/which/node_modules/isexe/mode.js:8:5
! gyp ERR! stack at FSReqWrap.oncomplete (fs.js:123:15)
! gyp ERR! System Linux 3.14.65-73
! gyp ERR! command "/usr/bin/nodejs" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"
! gyp ERR! cwd /opt/iobroker/node_modules/mdns
! gyp ERR! node -v v6.11.0
! gyp ERR! node-gyp -v v3.6.2
! gyp ERR! not ok
! npm WARN saveError ENOENT: no such file or directory, open '/opt/iobroker/package.json'
! npm ERR! Cannot read property 'type' of undefined
! npm ERR! A complete log of this run can be found in:
! npm ERR! /root/.npm/_logs/2017-06-15T07_33_53_839Z-debug.log
! Write "./iobroker start" to start the ioBroker
! /usr/bin/env: ‘node\r’: No such file or directory
! Auto-start was enabled. Write "update-rc.d -f iobroker.sh remove" to disable auto-start
! iobroker is started. Go to "http://ip-addr:8081" to open the admin UI.
! npm notice created a lockfile as package-lock.json. You should commit this file.
! npm WARN enoent ENOENT: no such file or directory, open '/opt/iobroker/package.json'
! npm WARN iobroker No description
! npm WARN iobroker No repository field.
! npm WARN iobroker No README data
! npm WARN iobroker No license field.
! + iobroker@1.0.0
! added 46 packages in 330.773s
! root@odroid64:/opt/iobroker# ^C
! root@odroid64:/opt/iobroker# ./iobroker start
! Starting iobroker controller daemon...
! iobroker controller daemon started. PID: 863
! root@odroid64:/opt/iobroker#</anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous></anonymous> -
Ich sehe nur ein paar Fehler meinte dass dies bekannt ist bei node 6 aber keine negativen Effekt hat
~Dutch
–-----------------------
Send from mobile device
-
Hallo Leute,
nachdem meine SD Karte jetzt hin war habe ich was neues gesucht.
Ich habe mir auch den Odroid c2 geholt, Installation habe ich nach der oberen Anleirung gemacht
hat gleich geklappt ioBroker läuft jedoch komme ich bei zwei Sachen nicht weiter.
Ich habe den Hostnamen in der Datei mit dem nano editor geändert
aber wie lautet das passwort ich habe odroid probiert hat aber nicht geklappt
Und ich nutze eine 32GB emmc Karte ich finde nichts wie ich die karte auf die ganze Größe setze.
Gruß Günther
-
Am Wochenende kommt mein Odroid C2 an.
Kann ich iobroker auch auf dem neusten Ubuntu Image 18.04 für den Odroid installieren?
373
Online32.5k
Benutzer81.7k
Themen1.3m
Beiträge