UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[WolfgangFB]

@matze-dev

Ja, habe ich ja mit

 more /etc/wmbusmeters.d/MyTapWater

angezeigt, dann muss es sie ja auch geben.
Darin sehe ich aber nichts was mir die Meldung im wmbusmeters.log (DeviceNotFound) erklären würde.

Wie sieht den Dein wmbusmeters.log aus?

[matze-dev]

@wolfgangfb sind da auch der Key drin und die Zähler ID?

[matze-dev]

@matze-dev
Das muss in der MyTapWater stehen

name=MyTapWater
type=multical21
id=##der Name/ID des Zaehlers ##
key=##hier den Key eintragen - kommt aus der zugeschickten XML-Datei des Wasserversorgers##

[WolfgangFB]

@matze-dev

Ja, habe ich doch in meinem Beitrag alles gequoted (incl. Key weil ich nicht denke, dass damit irgend jemand etwas anfangen kann). Fünfter Codeblock.

[matze-dev]

@wolfgangfb ok, habe es gesehen.

[WolfgangFB]

@matze-dev

Ich denke das Entscheidende ist die Zeile

[2021-07-17_16:31:43] [ALARM SpecifiedDeviceNotFound] the device /dev/ttyUSB0:im871a:t1 is not working

aus

 more /var/log/wmbusmeters/wmbusmeters.log

Codeblock 7

[matze-dev]

@wolfgangfb ja, das hätte ich auch als nächstes angemerkt.

[WolfgangFB]

@matze-dev
Muss man da irgendeinen Treiber installieren?

[matze-dev]

@wolfgangfb nein, das macht der wmbusmeters. D.h. der ist der Treiber für das Device.

[matze-dev]

@matze-dev gibt's in dem Verzeichnis auch noch Dateien /var/log/wmbusmeters/meter_readings?

[WolfgangFB]

@matze-dev

Das Verzeichnis existiert ist aber leer (was ja auch logisch ist, wenn nichts gelesen werden kann).

[matze-dev]

@wolfgangfb hier gibt's einen Threat
https://github.com/weetmuts/wmbusmeters/issues/286
Ich würde mal in Richtung udev schauen, in meiner alten Version musste ich da noch was machen, die neue Software braucht das wohl nicht mehr.

[matze-dev]

@matze-dev Was sagt denn der Befehl:
wmbusmeters --debug auto:t1 MyTapWater auto 57813696 E4E7EAF6FD17EAFB9587BC2996783C63

[matze-dev]

@matze-dev Änderung, die vorher hier abgelegte Installationsanleitung ist heraus genommen, die komplette Doku findet sich weiter unten.

[WolfgangFB]

@matze-dev

pi@raspberrypi:~ $ wmbusmeters --debug auto:t1 MyTapWater auto 57813696 E4E7EAF6FD17EAFB9587BC2996783C63
(wmbusmeters) version: _
(config) number of meters: 1
(main) device /dev/ttyAMA0 not currently used, detect contents...
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyAMA0 speed(B38400) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serial) after config:  /dev/ttyAMA0 speed(B9600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serialtty) opened /dev/ttyAMA0 fd 3 (detect amb8465)
(serial) received binary ""
(serial /dev/ttyAMA0) sent "FF0A02008077"
(serial /dev/ttyAMA0) sent "FF0A02008077"
(serial) EVENT thread interrupted
(serial) received binary ""
(serial) received binary ""
(serialtty) closed /dev/ttyAMA0 (detect amb8465)
(amb8465) are you there? no.
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyAMA0 speed(B9600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serial) after config:  /dev/ttyAMA0 speed(B57600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serialtty) opened /dev/ttyAMA0 fd 3 (detect im871a)
(serial) received binary ""
(serial /dev/ttyAMA0) sent "A5010F00"
(serial) EVENT thread interrupted
(serial) received binary ""
(im871a/im170a) are you there? no.
(serialtty) closed /dev/ttyAMA0 (detect im871a)
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyAMA0 speed(B57600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serial) after config:  /dev/ttyAMA0 speed(B19200) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serialtty) opened /dev/ttyAMA0 fd 3 (detect rc1180)
(serial /dev/ttyAMA0) sent "00"
(serial) EVENT thread interrupted
(serial) received binary ""
(serial /dev/ttyAMA0) sent "30"
(serial) EVENT thread interrupted
(serial) received binary ""
(serialtty) closed /dev/ttyAMA0 (detect rc1180)
(rc1180) are you there? no.
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyAMA0 speed(B19200) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serial) after config:  /dev/ttyAMA0 speed(B38400) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serialtty) opened /dev/ttyAMA0 fd 3 (detect cul)
(serial /dev/ttyAMA0) sent "560A0D"
(serial) EVENT thread interrupted
(serial) received binary ""
(cul) probe response ""
(serial /dev/ttyAMA0) sent "560A0D"
(serial) EVENT thread interrupted
(serial) received binary ""
(cul) probe response ""
(serial /dev/ttyAMA0) sent "560A0D"
(serial) EVENT thread interrupted
(serial) received binary ""
(cul) probe response ""
(serialtty) closed /dev/ttyAMA0 (detect cul)
(cul) are you there? no
(serial) EVENT thread interrupted
(main) ignoring /dev/ttyAMA0, it does not respond as any of the supported wmbus devices.
(main) device /dev/ttyUSB0 not currently used, detect contents...
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(main) ignoring /dev/ttyUSB0, it does not respond as any of the supported wmbus devices.
No wmbus device detected, waiting for a device to be plugged in.
(shell) exec (capture output) "/bin/pidof"
(shell) arg "wmbusmetersd"
(serial) EVENT thread interrupted
(shell) return code 1
(shell) 1824 exited
(shell) exec (capture output) "/bin/pidof"
(shell) arg "wmbusmeters"
(serial) EVENT thread interrupted
(shell) return code 0
(shell) 1825 exited
Notice! Other wmbusmeters (pid 673) is running and it might hog any wmbus devices.
(serial) registered regular callback HOT_PLUG_DETECTOR(0) every 2 seconds
(serial) waiting for stop

[matze-dev]

@wolfgangfb schau Dir mal meine hochgeladene Install-Doku an. Vielleicht kommst Du damit weiter.

[Thomas Braun]

@wolfgangfb

Notice! Other wmbusmeters (pid 673) is running and it might hog any wmbus devices.

[WolfgangFB]

@thomas-braun

In wmbusmeters.log steht nichts.
Ich frage mich allerdings, wie ich den "Other wmbusmeters" in den Griff bekommen kann. Da start ständig eine neue Instanz.

pi@raspberrypi:/var/log/wmbusmeters/meter_readings $ sudo systemctl stop wmbusmeters
pi@raspberrypi:/var/log/wmbusmeters/meter_readings $ ps -aux | grep wmbus
root     16817  0.2  0.0   1468   392 ?        Ss   21:28   0:00 /snap/wmbusmeters/596/bin/sh /snap/wmbusmeters/596/launcher.sh
root     16841  0.2  0.0  23032  1448 ?        Sl   21:28   0:00 /snap/wmbusmeters/596/usr/bin/wmbusmeters --useconfig=/var/snap/wmbusmeters/common
pi       17054  0.0  0.0   7360   492 pts/0    S+   21:29   0:00 grep --color=auto wmbus
pi@raspberrypi:/var/log/wmbusmeters/meter_readings $ sudo kill -9 16817
pi@raspberrypi:/var/log/wmbusmeters/meter_readings $ ps -aux | grep wmbus
root     17125  2.6  0.0   1468   388 ?        Ss   21:29   0:00 /snap/wmbusmeters/596/bin/sh /snap/wmbusmeters/596/launcher.sh
root     17154  0.5  0.0  22008  1464 ?        Sl   21:29   0:00 /snap/wmbusmeters/596/usr/bin/wmbusmeters --useconfig=/var/snap/wmbusmeters/common
pi       17170  0.0  0.0   7360   496 pts/0    S+   21:29   0:00 grep --color=auto wmbus
pi@raspberrypi:/var/log/wmbusmeters/meter_readings $ wmbusmeters --debug auto:t1 MyTapWater auto 57813696 E4E7EAF6FD17EAFB9587BC2996783C63
(wmbusmeters) version: _
(config) number of meters: 1
(main) device /dev/ttyAMA0 not currently used, detect contents...
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyAMA0 speed(B38400) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serial) after config:  /dev/ttyAMA0 speed(B9600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serialtty) opened /dev/ttyAMA0 fd 3 (detect amb8465)
(serial) received binary ""
(serial /dev/ttyAMA0) sent "FF0A02008077"
(serial /dev/ttyAMA0) sent "FF0A02008077"
(serial) EVENT thread interrupted
(serial) received binary ""
(serial) received binary ""
(serialtty) closed /dev/ttyAMA0 (detect amb8465)
(amb8465) are you there? no.
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyAMA0 speed(B9600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serial) after config:  /dev/ttyAMA0 speed(B57600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serialtty) opened /dev/ttyAMA0 fd 3 (detect im871a)
(serial) received binary ""
(serial /dev/ttyAMA0) sent "A5010F00"
(serial) EVENT thread interrupted
(serial) received binary "0984488448844884"
(im871a) checkIM871AFrame "0984488448844884"
(im871a) frame does not start with a5 "0984488448844884"
(im871a) no a5 found at all, drop frame packet.
(im871a/im170a) are you there? no.
(serialtty) closed /dev/ttyAMA0 (detect im871a)
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyAMA0 speed(B57600) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serial) after config:  /dev/ttyAMA0 speed(B19200) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serialtty) opened /dev/ttyAMA0 fd 3 (detect rc1180)
(serial /dev/ttyAMA0) sent "00"
(serial) EVENT thread interrupted
(serial) received binary ""
(serial /dev/ttyAMA0) sent "30"
(serial) EVENT thread interrupted
(serial) received binary ""
(serialtty) closed /dev/ttyAMA0 (detect rc1180)
(rc1180) are you there? no.
(serial) EVENT thread interrupted
(serial) before config: /dev/ttyAMA0 speed(B19200) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serial) after config:  /dev/ttyAMA0 speed(B38400) input() output() control(CLOCAL|CREAD|CSIZE) local() special_chars() modem(DTR|RTS|CTS)
(serialtty) opened /dev/ttyAMA0 fd 3 (detect cul)
(serial /dev/ttyAMA0) sent "560A0D"
(serial) EVENT thread interrupted
(serial) received binary "540442205404E2"
(cul) probe response "T<04>B T<04><E2>"
(serial /dev/ttyAMA0) sent "560A0D"
(serial) EVENT thread interrupted
(serial) received binary "540442205404E2"
(cul) probe response "T<04>B T<04><E2>"
(serial /dev/ttyAMA0) sent "560A0D"
(serial) EVENT thread interrupted
(serial) received binary "540442205404E2"
(cul) probe response "T<04>B T<04><E2>"
(serialtty) closed /dev/ttyAMA0 (detect cul)
(cul) are you there? no
(main) ignoring /dev/ttyAMA0, it does not respond as any of the supported wmbus devices.
(main) device /dev/ttyUSB0 not currently used, detect contents...
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(serial) EVENT thread interrupted
(main) ignoring /dev/ttyUSB0, it does not respond as any of the supported wmbus devices.
No wmbus device detected, waiting for a device to be plugged in.
(shell) exec (capture output) "/bin/pidof"
(shell) arg "wmbusmetersd"
(shell) output: >>><<<
(serial) EVENT thread interrupted
(shell) return code 1
(shell) 17248 exited
(shell) exec (capture output) "/bin/pidof"
(shell) arg "wmbusmeters"
(serial) EVENT thread interrupted
(shell) return code 0
(shell) 17249 exited
Notice! Other wmbusmeters (pid 17154) is running and it might hog any wmbus devices.
(serial) registered regular callback HOT_PLUG_DETECTOR(0) every 2 seconds
(serial) waiting for stop

[matze-dev]

@wolfgangfb morgen müsste ich die komplette Doku fertig haben - dann kann man das komplette System von Scratch aufsetzen und hat dann alles beisammen. Ich stelle die Anleitung + Skripte dann hier ein.

[WolfgangFB]

@matze-dev

Super, ich hoffe, Du hast das dann auch mal mit einer echt blanken Raspberry Installation getestet.