Nach einspielen von Sicherung Telegram & TR-64 Defekt.
-
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
ist das schlimm?
Das ist eine Entwicklerversion und läuft in absehbarer Zeit aus.
@thomas-braun dann ein downgrade machen, oder lassen und dann auf 20 wenn es so weit ist?
-
@thomas-braun dann ein downgrade machen, oder lassen und dann auf 20 wenn es so weit ist?
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
@thomas-braun dann ein downgrade machen, oder lassen und dann auf 20 wenn es so weit ist?
wir wissen von deiner Installation: nix!
bitte den Output von
iob diagzeigenin code-tags!
-
@thomas-braun dann ein downgrade machen, oder lassen und dann auf 20 wenn es so weit ist?
-
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 17:50:03 up 45 min, 1 user, load average: 3.67, 3.92, 3.44 CPU threads: 4 Raspberry only: Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 Other values than 0x0 hint to temperature/voltage problems Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 *** Time and Time Zones *** Failed to connect to bus: No such file or directory *** User and Groups *** dietpi /home/dietpi dietpi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: Failed to connect to bus: No such file or directory Boot Target: *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 597M 68M 1.8G 2.2G Swap: 4.1G 0B 4.1G Total: 7.9G 1.5G 4.7G 3844 M total memory 1485 M used memory 1811 M active memory 1196 M inactive memory 595 M free memory 72 M buffer memory 1690 M swap cache 4095 M total swap 0 M used swap 4095 M free swap Raspberry only: Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 916G 260G 656G 29% / devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 3.5M 1.9G 1% /dev/shm tmpfs tmpfs 769M 8.7M 761M 2% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 2.9G 27M 2.9G 1% /tmp tmpfs tmpfs 50M 36K 50M 1% /var/log /dev/mmcblk0p1 vfat 127M 32M 95M 26% /boot Messages concerning ext4 filesystem in dmesg: [Tue Apr 25 17:04:12 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm28 35.enable_headphones=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 bcm2708_f b.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macad dr=DC:A6:32:5B:7E:AF vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 root=PARTUUID= 44913460-8f3c-4a1b-8c50-6793f20b7a73 rootfstype=ext4 rootwait net.ifnames=0 logo.nologo co nsole=tty1 console=ttyAMA0,115200 [Tue Apr 25 17:04:15 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quot a mode: none. [Tue Apr 25 17:04:15 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [Tue Apr 25 17:04:16 2023] EXT4-fs (sda1): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,noatime,lazytime,stripe=8191 `-/boot /dev/mmcblk0p1 vfat rw,noatime,lazytime,fmask=0022,dmask=0022,codepage=437,iocha rset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.8G /var/ 518M /var/www 509M /var/www/nextcloud 268M /var/www/nextcloud/apps 215M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. No journal files were opened due to insufficient permissions. /opt/iobroker/backups: 11M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 165M /opt/iobroker/iobroker-data/ 137M /opt/iobroker/iobroker-data/files 51M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/telegram.admin 32M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modu les_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a 3f.chunk.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 7.6M /opt/iobroker/iobroker-data/states.jsonl 7.2M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modu les_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a 3f.chunk.js 6.9M /opt/iobroker/iobroker-data/files/telegram.admin/custom/static/js/vendors-node_mod ules_mui_icons-material_esm_index_js.8fdf8cb7.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v19.9.0 /usr/bin/node v19.9.0 /usr/bin/npm 9.6.3 /usr/bin/npx 9.6.3 nodejs: Installed: 19.9.0-deb-1nodesource1 Candidate: 19.9.0-deb-1nodesource1 Version table: *** 19.9.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_19.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 https://deb.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 https://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.accuweather.0 : accuweather : DietPi - enabled + system.adapter.admin.0 : admin : DietPi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : DietPi - enabled + system.adapter.backitup.0 : backitup : DietPi - enabled + system.adapter.discovery.0 : discovery : DietPi - enabled system.adapter.dwd.0 : dwd : DietPi - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : DietPi - enabled + system.adapter.history.0 : history : DietPi - enabled + system.adapter.hue.0 : hue : DietPi - enabled, port: 443 + system.adapter.javascript.0 : javascript : DietPi - enabled system.adapter.luftdaten.0 : luftdaten : DietPi - enabled system.adapter.netatmo-crawler.0 : netatmo-crawler : DietPi - enabled + system.adapter.nina.0 : nina : DietPi - enabled + system.adapter.parcel.0 : parcel : DietPi - enabled + system.adapter.parcel.1 : parcel : DietPi - enabled + system.adapter.telegram.0 : telegram : DietPi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : DietPi - enabled + system.adapter.web.0 : web : DietPi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DietPi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : DietPi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : DietPi - enabled, port: 443 + system.adapter.telegram.0 : telegram : DietPi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : DietPi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DietPi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.1 , installed 1.2.1 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.16 , installed 2.6.16 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "fb-checkpresence": 1.1.26, installed 1.1.26 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "luftdaten" : 2.2.4 , installed 2.2.4 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 7613 States: 6647 *** OS-Repositories and Updates *** Hit:1 https://downloads.plex.tv/repo/deb public InRelease Hit:2 https://deb.nodesource.com/node_19.x bullseye InRelease Hit:3 https://deb.debian.org/debian bullseye InRelease Hit:4 https://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.debian.org/debian-security bullseye-security InRelease Hit:6 https://archive.raspberrypi.org/debian bullseye InRelease Hit:7 https://deb.debian.org/debian bullseye-backports InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:32600 0.0.0.0:* LISTEN 997 52966 4850/Plex Tuner Ser tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 0 1785 478/perl tcp 0 0 127.0.0.1:32401 0.0.0.0:* LISTEN 997 50097 4708/Plex Media Ser tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 104 13319 627/mariadbd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 11819 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 368 362/dropbear tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 998 12203 555/pihole-FTL tcp 0 0 127.0.0.1:39821 0.0.0.0:* LISTEN 997 54375 4918/Plex Plug-in [ tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 808 843/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 776 843/iobroker.js-con tcp 0 0 0.0.0.0:32469 0.0.0.0:* LISTEN 997 50165 4849/Plex DLNA Serv tcp 0 0 127.0.0.1:4711 0.0.0.0:* LISTEN 998 12209 555/pihole-FTL tcp 0 0 127.0.0.1:37179 0.0.0.0:* LISTEN 997 50862 4733/Plex Plug-in [ tcp 0 0 0.0.0.0:1247 0.0.0.0:* LISTEN 997 50158 4849/Plex DLNA Serv tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 105 486 547/redis-server 12 tcp6 0 0 ::1:4711 :::* LISTEN 998 12210 555/pihole-FTL tcp6 0 0 ::1:6379 :::* LISTEN 105 487 547/redis-server 12 tcp6 0 0 :::80 :::* LISTEN 0 13013 748/apache2 tcp6 0 0 :::111 :::* LISTEN 0 12539 1/init tcp6 0 0 :::22 :::* LISTEN 0 369 362/dropbear tcp6 0 0 :::53 :::* LISTEN 998 12205 555/pihole-FTL tcp6 0 0 :::8082 :::* LISTEN 1001 20977 1996/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 15861 1502/io.admin.0 tcp6 0 0 :::32400 :::* LISTEN 997 50095 4708/Plex Media Ser tcp6 0 0 :::5252 :::* LISTEN 0 1828 528/dietpi-dashboar udp 0 0 192.168.178.20:5353 0.0.0.0:* 1001 16135 1744/io.tr-064.0 udp 0 0 127.0.0.1:50431 0.0.0.0:* 997 52960 4708/Plex Media Ser udp 0 0 192.168.178.20:44520 0.0.0.0:* 997 52963 4708/Plex Media Ser udp 0 0 192.168.178.20:40439 0.0.0.0:* 997 52961 4708/Plex Media Ser udp 0 0 0.0.0.0:46598 0.0.0.0:* 997 50171 4849/Plex DLNA Serv udp 0 0 0.0.0.0:32410 0.0.0.0:* 997 52955 4708/Plex Media Ser udp 0 0 0.0.0.0:32412 0.0.0.0:* 997 52956 4708/Plex Media Ser udp 0 0 0.0.0.0:32413 0.0.0.0:* 997 52957 4708/Plex Media Ser udp 0 0 0.0.0.0:32414 0.0.0.0:* 997 52954 4708/Plex Media Ser udp 0 0 0.0.0.0:1900 0.0.0.0:* 997 50155 4849/Plex DLNA Serv udp 0 0 0.0.0.0:1901 0.0.0.0:* 997 52962 4708/Plex Media Ser udp 0 0 0.0.0.0:53 0.0.0.0:* 998 12202 555/pihole-FTL udp 0 0 0.0.0.0:68 0.0.0.0:* 0 388 425/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 39 1/init udp 0 0 127.0.0.1:49458 0.0.0.0:* 997 52958 4708/Plex Media Ser udp 0 0 192.168.178.20:45382 0.0.0.0:* 997 52959 4708/Plex Media Ser udp 0 0 0.0.0.0:10753 0.0.0.0:* 997 50162 4849/Plex DLNA Serv udp 0 0 0.0.0.0:45758 0.0.0.0:* 997 50168 4849/Plex DLNA Serv udp6 0 0 :::53 :::* 998 12204 555/pihole-FTL udp6 0 0 :::111 :::* 0 42 1/init *** Log File - Last 25 Lines *** 2023-04-25 17:46:10.862 - info: admin.0 (1502) ==> Connected system.user.admin from ::ffff:192.168.178.54 2023-04-25 17:46:11.294 - info: zigbee.0 (1778) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"Silicon Labs","serialNumber":"0001","pnpId":"usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyS0"}] 2023-04-25 17:46:13.265 - info: zigbee.0 (1778) Zigbee: allowing new devices to join. 2023-04-25 17:46:26.868 - warn: zigbee.0 (1778) Device '0x00158d000320d688' announced itself 2023-04-25 17:46:36.536 - warn: zigbee.0 (1778) Device '0x00158d00090e87ed' announced itself 2023-04-25 17:46:53.324 - warn: zigbee.0 (1778) Device '0x00158d0008f13899' announced itself 2023-04-25 17:47:08.010 - warn: zigbee.0 (1778) Device '0x00158d00047b8146' announced itself 2023-04-25 17:47:14.552 - info: zigbee.0 (1778) Zigbee: stop joining 2023-04-25 17:48:30.256 - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54 2023-04-25 17:48:40.284 - info: admin.0 (1502) ==> Connected system.user.admin from ::ffff:192.168.178.54 2023-04-25 17:48:50.465 - info: javascript.0 (1657) Stop script script.js.Eigene.Telegram_Logfile 2023-04-25 17:48:51.717 - info: javascript.0 (1657) Start javascript script.js.Eigene.Telegram_Logfile 2023-04-25 17:48:51.774 - info: javascript.0 (1657) script.js.Eigene.Telegram_Logfile: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2023-04-25 17:49:22.347 - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54 javascript 2023-04-25 17:49:22.363 - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54 admin 2023-04-25 17:50:00.124 - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 13942 2023-04-25 17:50:04.161 - info: host.DietPi instance system.adapter.dwd.0 started with pid 14015 2023-04-25 17:50:05.215 - info: netatmo-crawler.0 (13942) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v19.9.0, js-controller: 4.0.24 2023-04-25 17:50:05.389 - info: netatmo-crawler.0 (13942) Getting data for stationid:70:ee:50:65:8b:78 2023-04-25 17:50:08.045 - info: netatmo-crawler.0 (13942) Getting data for stationid:70:ee:50:13:60:32 2023-04-25 17:50:09.385 - info: dwd.0 (14015) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v19.9.0, js-controller: 4.0.24 2023-04-25 17:50:09.761 - info: netatmo-crawler.0 (13942) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-04-25 17:50:10.348 - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-25 17:50:12.874 - info: dwd.0 (14015) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-04-25 17:50:13.439 - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============ Mark until here for C&P =============
iob diag has finished.
-
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 17:50:03 up 45 min, 1 user, load average: 3.67, 3.92, 3.44 CPU threads: 4 Raspberry only: Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 Other values than 0x0 hint to temperature/voltage problems Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 *** Time and Time Zones *** Failed to connect to bus: No such file or directory *** User and Groups *** dietpi /home/dietpi dietpi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: Failed to connect to bus: No such file or directory Boot Target: *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.5G 597M 68M 1.8G 2.2G Swap: 4.1G 0B 4.1G Total: 7.9G 1.5G 4.7G 3844 M total memory 1485 M used memory 1811 M active memory 1196 M inactive memory 595 M free memory 72 M buffer memory 1690 M swap cache 4095 M total swap 0 M used swap 4095 M free swap Raspberry only: Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 916G 260G 656G 29% / devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 3.5M 1.9G 1% /dev/shm tmpfs tmpfs 769M 8.7M 761M 2% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 2.9G 27M 2.9G 1% /tmp tmpfs tmpfs 50M 36K 50M 1% /var/log /dev/mmcblk0p1 vfat 127M 32M 95M 26% /boot Messages concerning ext4 filesystem in dmesg: [Tue Apr 25 17:04:12 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm28 35.enable_headphones=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 bcm2708_f b.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macad dr=DC:A6:32:5B:7E:AF vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 root=PARTUUID= 44913460-8f3c-4a1b-8c50-6793f20b7a73 rootfstype=ext4 rootwait net.ifnames=0 logo.nologo co nsole=tty1 console=ttyAMA0,115200 [Tue Apr 25 17:04:15 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quot a mode: none. [Tue Apr 25 17:04:15 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [Tue Apr 25 17:04:16 2023] EXT4-fs (sda1): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,noatime,lazytime,stripe=8191 `-/boot /dev/mmcblk0p1 vfat rw,noatime,lazytime,fmask=0022,dmask=0022,codepage=437,iocha rset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.8G /var/ 518M /var/www 509M /var/www/nextcloud 268M /var/www/nextcloud/apps 215M /var/lib Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. No journal files were opened due to insufficient permissions. /opt/iobroker/backups: 11M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 165M /opt/iobroker/iobroker-data/ 137M /opt/iobroker/iobroker-data/files 51M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/telegram.admin 32M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modu les_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a 3f.chunk.js.map 11M /opt/iobroker/iobroker-data/objects.jsonl 7.6M /opt/iobroker/iobroker-data/states.jsonl 7.2M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modu les_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a 3f.chunk.js 6.9M /opt/iobroker/iobroker-data/files/telegram.admin/custom/static/js/vendors-node_mod ules_mui_icons-material_esm_index_js.8fdf8cb7.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v19.9.0 /usr/bin/node v19.9.0 /usr/bin/npm 9.6.3 /usr/bin/npx 9.6.3 nodejs: Installed: 19.9.0-deb-1nodesource1 Candidate: 19.9.0-deb-1nodesource1 Version table: *** 19.9.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_19.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 https://deb.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 https://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.accuweather.0 : accuweather : DietPi - enabled + system.adapter.admin.0 : admin : DietPi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : DietPi - enabled + system.adapter.backitup.0 : backitup : DietPi - enabled + system.adapter.discovery.0 : discovery : DietPi - enabled system.adapter.dwd.0 : dwd : DietPi - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : DietPi - enabled + system.adapter.history.0 : history : DietPi - enabled + system.adapter.hue.0 : hue : DietPi - enabled, port: 443 + system.adapter.javascript.0 : javascript : DietPi - enabled system.adapter.luftdaten.0 : luftdaten : DietPi - enabled system.adapter.netatmo-crawler.0 : netatmo-crawler : DietPi - enabled + system.adapter.nina.0 : nina : DietPi - enabled + system.adapter.parcel.0 : parcel : DietPi - enabled + system.adapter.parcel.1 : parcel : DietPi - enabled + system.adapter.telegram.0 : telegram : DietPi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : DietPi - enabled + system.adapter.web.0 : web : DietPi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DietPi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : DietPi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : DietPi - enabled, port: 443 + system.adapter.telegram.0 : telegram : DietPi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : DietPi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DietPi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.1 , installed 1.2.1 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.16 , installed 2.6.16 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "fb-checkpresence": 1.1.26, installed 1.1.26 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "luftdaten" : 2.2.4 , installed 2.2.4 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 7613 States: 6647 *** OS-Repositories and Updates *** Hit:1 https://downloads.plex.tv/repo/deb public InRelease Hit:2 https://deb.nodesource.com/node_19.x bullseye InRelease Hit:3 https://deb.debian.org/debian bullseye InRelease Hit:4 https://deb.debian.org/debian bullseye-updates InRelease Hit:5 https://deb.debian.org/debian-security bullseye-security InRelease Hit:6 https://archive.raspberrypi.org/debian bullseye InRelease Hit:7 https://deb.debian.org/debian bullseye-backports InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:32600 0.0.0.0:* LISTEN 997 52966 4850/Plex Tuner Ser tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 0 1785 478/perl tcp 0 0 127.0.0.1:32401 0.0.0.0:* LISTEN 997 50097 4708/Plex Media Ser tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 104 13319 627/mariadbd tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 11819 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 368 362/dropbear tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 998 12203 555/pihole-FTL tcp 0 0 127.0.0.1:39821 0.0.0.0:* LISTEN 997 54375 4918/Plex Plug-in [ tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 808 843/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 776 843/iobroker.js-con tcp 0 0 0.0.0.0:32469 0.0.0.0:* LISTEN 997 50165 4849/Plex DLNA Serv tcp 0 0 127.0.0.1:4711 0.0.0.0:* LISTEN 998 12209 555/pihole-FTL tcp 0 0 127.0.0.1:37179 0.0.0.0:* LISTEN 997 50862 4733/Plex Plug-in [ tcp 0 0 0.0.0.0:1247 0.0.0.0:* LISTEN 997 50158 4849/Plex DLNA Serv tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 105 486 547/redis-server 12 tcp6 0 0 ::1:4711 :::* LISTEN 998 12210 555/pihole-FTL tcp6 0 0 ::1:6379 :::* LISTEN 105 487 547/redis-server 12 tcp6 0 0 :::80 :::* LISTEN 0 13013 748/apache2 tcp6 0 0 :::111 :::* LISTEN 0 12539 1/init tcp6 0 0 :::22 :::* LISTEN 0 369 362/dropbear tcp6 0 0 :::53 :::* LISTEN 998 12205 555/pihole-FTL tcp6 0 0 :::8082 :::* LISTEN 1001 20977 1996/io.web.0 tcp6 0 0 :::8081 :::* LISTEN 1001 15861 1502/io.admin.0 tcp6 0 0 :::32400 :::* LISTEN 997 50095 4708/Plex Media Ser tcp6 0 0 :::5252 :::* LISTEN 0 1828 528/dietpi-dashboar udp 0 0 192.168.178.20:5353 0.0.0.0:* 1001 16135 1744/io.tr-064.0 udp 0 0 127.0.0.1:50431 0.0.0.0:* 997 52960 4708/Plex Media Ser udp 0 0 192.168.178.20:44520 0.0.0.0:* 997 52963 4708/Plex Media Ser udp 0 0 192.168.178.20:40439 0.0.0.0:* 997 52961 4708/Plex Media Ser udp 0 0 0.0.0.0:46598 0.0.0.0:* 997 50171 4849/Plex DLNA Serv udp 0 0 0.0.0.0:32410 0.0.0.0:* 997 52955 4708/Plex Media Ser udp 0 0 0.0.0.0:32412 0.0.0.0:* 997 52956 4708/Plex Media Ser udp 0 0 0.0.0.0:32413 0.0.0.0:* 997 52957 4708/Plex Media Ser udp 0 0 0.0.0.0:32414 0.0.0.0:* 997 52954 4708/Plex Media Ser udp 0 0 0.0.0.0:1900 0.0.0.0:* 997 50155 4849/Plex DLNA Serv udp 0 0 0.0.0.0:1901 0.0.0.0:* 997 52962 4708/Plex Media Ser udp 0 0 0.0.0.0:53 0.0.0.0:* 998 12202 555/pihole-FTL udp 0 0 0.0.0.0:68 0.0.0.0:* 0 388 425/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 39 1/init udp 0 0 127.0.0.1:49458 0.0.0.0:* 997 52958 4708/Plex Media Ser udp 0 0 192.168.178.20:45382 0.0.0.0:* 997 52959 4708/Plex Media Ser udp 0 0 0.0.0.0:10753 0.0.0.0:* 997 50162 4849/Plex DLNA Serv udp 0 0 0.0.0.0:45758 0.0.0.0:* 997 50168 4849/Plex DLNA Serv udp6 0 0 :::53 :::* 998 12204 555/pihole-FTL udp6 0 0 :::111 :::* 0 42 1/init *** Log File - Last 25 Lines *** 2023-04-25 17:46:10.862 - info: admin.0 (1502) ==> Connected system.user.admin from ::ffff:192.168.178.54 2023-04-25 17:46:11.294 - info: zigbee.0 (1778) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"Silicon Labs","serialNumber":"0001","pnpId":"usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyS0"}] 2023-04-25 17:46:13.265 - info: zigbee.0 (1778) Zigbee: allowing new devices to join. 2023-04-25 17:46:26.868 - warn: zigbee.0 (1778) Device '0x00158d000320d688' announced itself 2023-04-25 17:46:36.536 - warn: zigbee.0 (1778) Device '0x00158d00090e87ed' announced itself 2023-04-25 17:46:53.324 - warn: zigbee.0 (1778) Device '0x00158d0008f13899' announced itself 2023-04-25 17:47:08.010 - warn: zigbee.0 (1778) Device '0x00158d00047b8146' announced itself 2023-04-25 17:47:14.552 - info: zigbee.0 (1778) Zigbee: stop joining 2023-04-25 17:48:30.256 - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54 2023-04-25 17:48:40.284 - info: admin.0 (1502) ==> Connected system.user.admin from ::ffff:192.168.178.54 2023-04-25 17:48:50.465 - info: javascript.0 (1657) Stop script script.js.Eigene.Telegram_Logfile 2023-04-25 17:48:51.717 - info: javascript.0 (1657) Start javascript script.js.Eigene.Telegram_Logfile 2023-04-25 17:48:51.774 - info: javascript.0 (1657) script.js.Eigene.Telegram_Logfile: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions 2023-04-25 17:49:22.347 - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54 javascript 2023-04-25 17:49:22.363 - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54 admin 2023-04-25 17:50:00.124 - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 13942 2023-04-25 17:50:04.161 - info: host.DietPi instance system.adapter.dwd.0 started with pid 14015 2023-04-25 17:50:05.215 - info: netatmo-crawler.0 (13942) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v19.9.0, js-controller: 4.0.24 2023-04-25 17:50:05.389 - info: netatmo-crawler.0 (13942) Getting data for stationid:70:ee:50:65:8b:78 2023-04-25 17:50:08.045 - info: netatmo-crawler.0 (13942) Getting data for stationid:70:ee:50:13:60:32 2023-04-25 17:50:09.385 - info: dwd.0 (14015) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v19.9.0, js-controller: 4.0.24 2023-04-25 17:50:09.761 - info: netatmo-crawler.0 (13942) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-04-25 17:50:10.348 - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-25 17:50:12.874 - info: dwd.0 (14015) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-04-25 17:50:13.439 - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)============ Mark until here for C&P =============
iob diag has finished.
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
load average: 3.67, 3.92, 3.44
heftig was zu tun?
was läuft da alles?kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
load average: 3.67, 3.92, 3.44
heftig was zu tun?
was läuft da alles? -
@homoran Plex, Nextcloud, iobroker, pihole, dietpidashboard, rpimonitor.
Ist das schlimm?
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
Ist das schlimm?
du bist am Anschlag!
load average >4 ist beim pi4 im roten Bereich
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
Ist das schlimm?
du bist am Anschlag!
load average >4 ist beim pi4 im roten Bereich
@homoran Ja der kopiert gerade meine Musik auf die SSD und Plex Scannt dazu noch.
Normal ist ca 1GB von 4GB RAM frei, und hab noch 2GB als Z-RAM wenn das mal mehr benötigt, 2GB SWAP die aber nicht benutzt werden sollen, aber man weis ja nie.
CPU ist normal bei ca. 40° und kaum/nicht ausgelastet, ist passiv gekühlt normal temp bei der alten Pi4 revision.
SD karte ist nur Boot, alles ist auf 1TB Externer SSD, die dürfte wenn fertig bei unter 50% Füllstand sein.Also das legt sich alles wieder wenn das hier mal fertig wird.
-
@homoran Ja der kopiert gerade meine Musik auf die SSD und Plex Scannt dazu noch.
Normal ist ca 1GB von 4GB RAM frei, und hab noch 2GB als Z-RAM wenn das mal mehr benötigt, 2GB SWAP die aber nicht benutzt werden sollen, aber man weis ja nie.
CPU ist normal bei ca. 40° und kaum/nicht ausgelastet, ist passiv gekühlt normal temp bei der alten Pi4 revision.
SD karte ist nur Boot, alles ist auf 1TB Externer SSD, die dürfte wenn fertig bei unter 50% Füllstand sein.Also das legt sich alles wieder wenn das hier mal fertig wird.
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
alles ist auf 1TB Externer SSD
hoffentlich nicht an USB3
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
alles ist auf 1TB Externer SSD
hoffentlich nicht an USB3
@homoran said in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
alles ist auf 1TB Externer SSD
hoffentlich nicht an USB3
Warum?
Ist an USB3, eine M.2 in einem Gehäuse.
-
@homoran said in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
alles ist auf 1TB Externer SSD
hoffentlich nicht an USB3
Warum?
Ist an USB3, eine M.2 in einem Gehäuse.
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
Warum?
weil der Pi4 an USB3 hochfrequenzeinstreuungen hat, was zu massiven Störungen des Datenverkehrs führt.
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@thomas-braun Doch aus deren software bibliothek, war mein Fehler das bei der Pi einrichtung zu nehmen.
Alle adapter wieder grün, node 19 selber installiert!
Danke euch besonders für: iob diag
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
Doch aus deren software bibliothek,
Ich sehe da nur das nodejs19-Repo, was zu hoch ist und auch so nicht vom iobroker:Installer angelegt wird. Haste also selber reingebügelt. Fragt sich nur warum?
Installier da nodejs18.
-
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
Warum?
weil der Pi4 an USB3 hochfrequenzeinstreuungen hat, was zu massiven Störungen des Datenverkehrs führt.
-
@homoran Geht es darum so langsam voran?
M.2 bekommt doch von USB 2 nicht genug Saft, und was mache ich jetzt?@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
Geht es darum so langsam voran?
möglich!
wäre aber ggf. auch was für @Thomas-Braun@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
M.2 bekommt doch von USB 2 nicht genug Saft, und was mache ich jetzt?
aktiven Hub nehmen!?
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
Geht es darum so langsam voran?
möglich!
wäre aber ggf. auch was für @Thomas-Braun@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
M.2 bekommt doch von USB 2 nicht genug Saft, und was mache ich jetzt?
aktiven Hub nehmen!?
Bin jetzt ein bisschen schlauer, NC lädt sowieso nur mit einem Kern hoch, also scheint mit der USB Verbindung alles okay zu sein.
So und iobroker hat jetzt node 18, dann ist doch jetzt alles korrekt eingestellt wenn ich das richtig verstehe?
Node.js: v18.16.0 NPM: 9.5.1 -
Bin jetzt ein bisschen schlauer, NC lädt sowieso nur mit einem Kern hoch, also scheint mit der USB Verbindung alles okay zu sein.
So und iobroker hat jetzt node 18, dann ist doch jetzt alles korrekt eingestellt wenn ich das richtig verstehe?
Node.js: v18.16.0 NPM: 9.5.1@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
NC lädt sowieso nur mit einem Kern hoch,
Norton Commander?
kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
Bin jetzt ein bisschen schlauer, NC lädt sowieso nur mit einem Kern hoch, also scheint mit der USB Verbindung alles okay zu sein.
So und iobroker hat jetzt node 18, dann ist doch jetzt alles korrekt eingestellt wenn ich das richtig verstehe?
Node.js: v18.16.0 NPM: 9.5.1@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
So und iobroker hat jetzt node 18, dann ist doch jetzt alles korrekt eingestellt wenn ich das richtig verstehe?
nicht editieren!
habs beim zumachen nur durch Zufall gesehen, dass sich da was änderte.Das kann man erst sagen wenn man alle Informationen hat!
akaiob diagkein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
NC lädt sowieso nur mit einem Kern hoch,
Norton Commander?
@homoran Nextcloud.
-
@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:
So und iobroker hat jetzt node 18, dann ist doch jetzt alles korrekt eingestellt wenn ich das richtig verstehe?
nicht editieren!
habs beim zumachen nur durch Zufall gesehen, dass sich da was änderte.Das kann man erst sagen wenn man alle Informationen hat!
akaiob diag======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 16:32:27 up 2:46, 1 user, load average: 0.34, 0.54, 0.41 CPU threads: 4 Raspberry only: Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 Other values than 0x0 hint to temperature/voltage problems Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 *** Time and Time Zones *** Failed to connect to bus: No such file or directory *** User and Groups *** dietpi /home/dietpi dietpi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: Failed to connect to bus: No such file or directory Boot Target: *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.4G 904M 42M 1.5G 2.3G Swap: 4.1G 0B 4.1G Total: 7.9G 1.4G 5.0G 3844 M total memory 1414 M used memory 1744 M active memory 894 M inactive memory 904 M free memory 341 M buffer memory 1183 M swap cache 4095 M total swap 0 M used swap 4095 M free swap Raspberry only: Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 916G 367G 550G 41% / devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 5.8M 1.9G 1% /dev/shm tmpfs tmpfs 769M 8.7M 761M 2% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 2.9G 0 2.9G 0% /tmp tmpfs tmpfs 50M 44K 50M 1% /var/log /dev/mmcblk0p1 vfat 127M 32M 95M 26% /boot Messages concerning ext4 filesystem in dmesg: [Wed Apr 26 13:46:00 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:5B:7E:AF vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 root=PARTUUID=44913460-8f3c-4a1b-8c50-6793f20b7a73 rootfstype=ext4 rootwait net.ifnames=0 logo.nologo console=tty1 console=ttyAMA0,115200 console=ttyS0,115200 [Wed Apr 26 13:46:04 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [Wed Apr 26 13:46:04 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [Wed Apr 26 13:46:06 2023] EXT4-fs (sda1): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,noatime,lazytime,stripe=8191 `-/boot /dev/mmcblk0p1 vfat rw,noatime,lazytime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 5.0G /var/ 2.5G /var/lib/plexmediaserver/Library/Application Support/Plex Media Server 2.5G /var/lib/plexmediaserver/Library/Application Support 2.5G /var/lib/plexmediaserver/Library 2.5G /var/lib/plexmediaserver Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. No journal files were opened due to insufficient permissions. /opt/iobroker/backups: 14M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 204M /opt/iobroker/iobroker-data/ 137M /opt/iobroker/iobroker-data/files 51M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/telegram.admin 32M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/states.jsonl 18M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 7.2M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js 6.9M /opt/iobroker/iobroker-data/files/telegram.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.8fdf8cb7.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 https://deb.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 https://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.accuweather.0 : accuweather : DietPi - enabled + system.adapter.admin.0 : admin : DietPi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : DietPi - enabled + system.adapter.backitup.0 : backitup : DietPi - enabled + system.adapter.discovery.0 : discovery : DietPi - enabled system.adapter.dwd.0 : dwd : DietPi - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : DietPi - enabled + system.adapter.history.0 : history : DietPi - enabled + system.adapter.hue.0 : hue : DietPi - enabled, port: 443 + system.adapter.javascript.0 : javascript : DietPi - enabled system.adapter.luftdaten.0 : luftdaten : DietPi - enabled system.adapter.netatmo-crawler.0 : netatmo-crawler : DietPi - enabled + system.adapter.nina.0 : nina : DietPi - enabled + system.adapter.parcel.0 : parcel : DietPi - enabled + system.adapter.parcel.1 : parcel : DietPi - enabled + system.adapter.telegram.0 : telegram : DietPi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : DietPi - enabled + system.adapter.web.0 : web : DietPi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DietPi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : DietPi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : DietPi - enabled, port: 443 + system.adapter.telegram.0 : telegram : DietPi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : DietPi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DietPi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.1 , installed 1.2.1 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.19 , installed 2.6.19 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "fb-checkpresence": 1.1.26, installed 1.1.26 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "luftdaten" : 2.2.4 , installed 2.2.4 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 7670 States: 6698 *** OS-Repositories and Updates *** Hit:1 https://downloads.plex.tv/repo/deb public InRelease Hit:2 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:3 https://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://deb.debian.org/debian bullseye InRelease Hit:5 https://deb.debian.org/debian bullseye-updates InRelease Hit:6 https://deb.debian.org/debian-security bullseye-security InRelease Hit:7 https://deb.debian.org/debian bullseye-backports InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12261 840/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 12252 840/iobroker.js-con tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 998 13659 555/pihole-FTL tcp 0 0 127.0.0.1:44021 0.0.0.0:* LISTEN 997 12701 711/Plex Plug-in [c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10877 360/dropbear tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 10062 1/init tcp 0 0 127.0.0.1:4711 0.0.0.0:* LISTEN 998 13675 555/pihole-FTL tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 0 11768 479/perl tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 105 12499 546/redis-server 12 tcp 0 0 127.0.0.1:32600 0.0.0.0:* LISTEN 997 15048 1533/Plex Tuner Ser tcp 0 0 127.0.0.1:32401 0.0.0.0:* LISTEN 997 11151 557/Plex Media Serv tcp 0 0 0.0.0.0:32469 0.0.0.0:* LISTEN 997 12744 1531/Plex DLNA Serv tcp 0 0 0.0.0.0:1966 0.0.0.0:* LISTEN 997 12737 1531/Plex DLNA Serv tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 104 11852 627/mariadbd tcp6 0 0 :::53 :::* LISTEN 998 13661 555/pihole-FTL tcp6 0 0 :::22 :::* LISTEN 0 10878 360/dropbear tcp6 0 0 :::111 :::* LISTEN 0 10707 1/init tcp6 0 0 :::80 :::* LISTEN 0 12544 761/apache2 tcp6 0 0 ::1:4711 :::* LISTEN 998 13676 555/pihole-FTL tcp6 0 0 ::1:6379 :::* LISTEN 105 12500 546/redis-server 12 tcp6 0 0 :::5252 :::* LISTEN 0 11099 528/dietpi-dashboar tcp6 0 0 :::32400 :::* LISTEN 997 11149 557/Plex Media Serv tcp6 0 0 :::8081 :::* LISTEN 1001 15784 1497/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 16308 2087/io.web.0 udp 0 0 192.168.178.20:58105 0.0.0.0:* 997 12708 557/Plex Media Serv udp 0 0 0.0.0.0:37676 0.0.0.0:* 997 16455 1531/Plex DLNA Serv udp 0 0 192.168.178.20:54140 0.0.0.0:* 997 12712 557/Plex Media Serv udp 0 0 127.0.0.1:33700 0.0.0.0:* 997 12707 557/Plex Media Serv udp 0 0 127.0.0.1:35956 0.0.0.0:* 997 12709 557/Plex Media Serv udp 0 0 192.168.178.20:5353 0.0.0.0:* 1001 15354 1829/io.tr-064.0 udp 0 0 0.0.0.0:32410 0.0.0.0:* 997 12704 557/Plex Media Serv udp 0 0 0.0.0.0:32412 0.0.0.0:* 997 12705 557/Plex Media Serv udp 0 0 0.0.0.0:32413 0.0.0.0:* 997 12706 557/Plex Media Serv udp 0 0 0.0.0.0:32414 0.0.0.0:* 997 12703 557/Plex Media Serv udp 0 0 0.0.0.0:1900 0.0.0.0:* 997 12734 1531/Plex DLNA Serv udp 0 0 0.0.0.0:1901 0.0.0.0:* 997 12711 557/Plex Media Serv udp 0 0 0.0.0.0:32818 0.0.0.0:* 997 16445 1531/Plex DLNA Serv udp 0 0 0.0.0.0:53 0.0.0.0:* 998 13658 555/pihole-FTL udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12425 427/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 893 1/init udp 0 0 192.168.178.20:45295 0.0.0.0:* 997 12710 557/Plex Media Serv udp 0 0 0.0.0.0:8606 0.0.0.0:* 997 12741 1531/Plex DLNA Serv udp6 0 0 :::53 :::* 998 13660 555/pihole-FTL udp6 0 0 :::111 :::* 0 896 1/init *** Log File - Last 25 Lines *** 2023-04-26 16:20:09.506 - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:25:00.124 - info: host.DietPi instance system.adapter.dwd.0 started with pid 39382 2023-04-26 16:25:02.840 - info: dwd.0 (39382) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:25:04.181 - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 39414 2023-04-26 16:25:06.594 - info: dwd.0 (39382) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-04-26 16:25:07.026 - info: netatmo-crawler.0 (39414) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:25:07.112 - info: netatmo-crawler.0 (39414) Getting data for stationid:70:ee:50:65:8b:78 2023-04-26 16:25:07.147 - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:25:08.611 - info: netatmo-crawler.0 (39414) Getting data for stationid:70:ee:50:13:60:32 2023-04-26 16:25:09.907 - info: netatmo-crawler.0 (39414) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-04-26 16:25:10.509 - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:30:00.146 - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 41987 2023-04-26 16:30:03.047 - info: netatmo-crawler.0 (41987) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:30:03.134 - info: netatmo-crawler.0 (41987) Getting data for stationid:70:ee:50:65:8b:78 2023-04-26 16:30:04.215 - info: host.DietPi instance system.adapter.dwd.0 started with pid 42016 2023-04-26 16:30:05.047 - info: netatmo-crawler.0 (41987) Getting data for stationid:70:ee:50:13:60:32 2023-04-26 16:30:06.560 - info: netatmo-crawler.0 (41987) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-04-26 16:30:07.106 - info: dwd.0 (42016) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:30:07.129 - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:30:08.248 - info: host.DietPi instance system.adapter.luftdaten.0 started with pid 42048 2023-04-26 16:30:09.622 - info: dwd.0 (42016) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-04-26 16:30:10.213 - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:30:10.815 - info: luftdaten.0 (42048) starting. Version 2.2.4 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:30:21.075 - info: luftdaten.0 (42048) Terminated (NO_ERROR): Without reason 2023-04-26 16:30:21.687 - info: host.DietPi instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR)============ Mark until here for C&P =============
-
======== Start marking the full check here =========
Skript v.2023-04-16 *** BASE SYSTEM *** Model : Raspberry Pi 4 Model B Rev 1.1 Architecture : aarch64 Docker : false Virtualization : none Distributor ID: Debian Description: Debian GNU/Linux 11 (bullseye) Release: 11 Codename: bullseye PRETTY_NAME="Debian GNU/Linux 11 (bullseye)" NAME="Debian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=debian HOME_URL="https://www.debian.org/" SUPPORT_URL="https://www.debian.org/support" BUG_REPORT_URL="https://bugs.debian.org/" Systemuptime and Load: 16:32:27 up 2:46, 1 user, load average: 0.34, 0.54, 0.41 CPU threads: 4 Raspberry only: Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 Other values than 0x0 hint to temperature/voltage problems Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 *** Time and Time Zones *** Failed to connect to bus: No such file or directory *** User and Groups *** dietpi /home/dietpi dietpi iobroker *** X-Server-Setup *** X-Server: false Desktop: Terminal: Failed to connect to bus: No such file or directory Boot Target: *** MEMORY *** total used free shared buff/cache available Mem: 3.8G 1.4G 904M 42M 1.5G 2.3G Swap: 4.1G 0B 4.1G Total: 7.9G 1.4G 5.0G 3844 M total memory 1414 M used memory 1744 M active memory 894 M inactive memory 904 M free memory 341 M buffer memory 1183 M swap cache 4095 M total swap 0 M used swap 4095 M free swap Raspberry only: Can't open device file: /dev/vcio Try creating a device file with: sudo mknod /dev/vcio c 100 0 *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on /dev/root ext4 916G 367G 550G 41% / devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 5.8M 1.9G 1% /dev/shm tmpfs tmpfs 769M 8.7M 761M 2% /run tmpfs tmpfs 5.0M 0 5.0M 0% /run/lock tmpfs tmpfs 2.9G 0 2.9G 0% /tmp tmpfs tmpfs 50M 44K 50M 1% /var/log /dev/mmcblk0p1 vfat 127M 32M 95M 26% /boot Messages concerning ext4 filesystem in dmesg: [Wed Apr 26 13:46:00 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:5B:7E:AF vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000 root=PARTUUID=44913460-8f3c-4a1b-8c50-6793f20b7a73 rootfstype=ext4 rootwait net.ifnames=0 logo.nologo console=tty1 console=ttyAMA0,115200 console=ttyS0,115200 [Wed Apr 26 13:46:04 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none. [Wed Apr 26 13:46:04 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:1. [Wed Apr 26 13:46:06 2023] EXT4-fs (sda1): re-mounted. Quota mode: none. Show mounted filesystems (real ones only): TARGET SOURCE FSTYPE OPTIONS / /dev/sda1 ext4 rw,noatime,lazytime,stripe=8191 `-/boot /dev/mmcblk0p1 vfat rw,noatime,lazytime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 5.0G /var/ 2.5G /var/lib/plexmediaserver/Library/Application Support/Plex Media Server 2.5G /var/lib/plexmediaserver/Library/Application Support 2.5G /var/lib/plexmediaserver/Library 2.5G /var/lib/plexmediaserver Hint: You are currently not seeing messages from other users and the system. Users in groups 'adm', 'systemd-journal' can see all messages. Pass -q to turn off this notice. No journal files were opened due to insufficient permissions. /opt/iobroker/backups: 14M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 204M /opt/iobroker/iobroker-data/ 137M /opt/iobroker/iobroker-data/files 51M /opt/iobroker/iobroker-data/files/javascript.admin 48M /opt/iobroker/iobroker-data/files/telegram.admin 32M /opt/iobroker/iobroker-data/files/javascript.admin/static/js The five largest files in iobroker-data are: 24M /opt/iobroker/iobroker-data/states.jsonl 18M /opt/iobroker/iobroker-data/objects.jsonl 15M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map 7.2M /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js 6.9M /opt/iobroker/iobroker-data/files/telegram.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.8fdf8cb7.chunk.js.map *** NodeJS-Installation *** /usr/bin/nodejs v18.16.0 /usr/bin/node v18.16.0 /usr/bin/npm 9.5.1 /usr/bin/npx 9.5.1 nodejs: Installed: 18.16.0-deb-1nodesource1 Candidate: 18.16.0-deb-1nodesource1 Version table: *** 18.16.0-deb-1nodesource1 500 500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages 100 /var/lib/dpkg/status 12.22.12~dfsg-1~deb11u3 500 500 https://deb.debian.org/debian-security bullseye-security/main arm64 Packages 12.22.5~dfsg-2~11u1 500 500 https://deb.debian.org/debian bullseye/main arm64 Packages Temp directories causing npm8 problem: 0 No problems detected *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl MULTIHOSTSERVICE/enabled: false Core adapters versions js-controller: 4.0.24 admin: 6.3.5 javascript: 6.1.4 Adapters from github: 0 Adapter State + system.adapter.accuweather.0 : accuweather : DietPi - enabled + system.adapter.admin.0 : admin : DietPi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : DietPi - enabled + system.adapter.backitup.0 : backitup : DietPi - enabled + system.adapter.discovery.0 : discovery : DietPi - enabled system.adapter.dwd.0 : dwd : DietPi - enabled + system.adapter.fb-checkpresence.0 : fb-checkpresence : DietPi - enabled + system.adapter.history.0 : history : DietPi - enabled + system.adapter.hue.0 : hue : DietPi - enabled, port: 443 + system.adapter.javascript.0 : javascript : DietPi - enabled system.adapter.luftdaten.0 : luftdaten : DietPi - enabled system.adapter.netatmo-crawler.0 : netatmo-crawler : DietPi - enabled + system.adapter.nina.0 : nina : DietPi - enabled + system.adapter.parcel.0 : parcel : DietPi - enabled + system.adapter.parcel.1 : parcel : DietPi - enabled + system.adapter.telegram.0 : telegram : DietPi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.tr-064.0 : tr-064 : DietPi - enabled + system.adapter.web.0 : web : DietPi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DietPi - enabled, port: /dev/ttyUSB0 + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : DietPi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hue.0 : hue : DietPi - enabled, port: 443 + system.adapter.telegram.0 : telegram : DietPi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : DietPi - enabled, port: 8082, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.0 : zigbee : DietPi - enabled, port: /dev/ttyUSB0 ioBroker-Repositories stable : http://download.iobroker.net/sources-dist.json beta : http://download.iobroker.net/sources-dist-latest.json Active repo(s): stable Installed ioBroker-Instances Used repository: stable Adapter "accuweather" : 1.2.1 , installed 1.2.1 Adapter "admin" : 6.3.5 , installed 6.3.5 Adapter "alexa2" : 3.23.2 , installed 3.23.2 Adapter "backitup" : 2.6.19 , installed 2.6.19 Adapter "discovery" : 3.1.0 , installed 3.1.0 Adapter "dwd" : 2.8.3 , installed 2.8.3 Adapter "fb-checkpresence": 1.1.26, installed 1.1.26 Adapter "history" : 2.2.4 , installed 2.2.4 Adapter "hue" : 3.7.1 , installed 3.7.1 Adapter "javascript" : 6.1.4 , installed 6.1.4 Controller "js-controller": 4.0.24 , installed 4.0.24 Adapter "luftdaten" : 2.2.4 , installed 2.2.4 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nina" : 0.0.25 , installed 0.0.25 Adapter "parcel" : 0.0.27 , installed 0.0.27 Adapter "simple-api" : 2.7.2 , installed 2.7.2 Adapter "socketio" : 4.2.0 , installed 4.2.0 Adapter "telegram" : 1.15.2 , installed 1.15.2 Adapter "tr-064" : 4.2.18 , installed 4.2.18 Adapter "web" : 4.3.0 , installed 4.3.0 Adapter "ws" : 1.3.0 , installed 1.3.0 Adapter "zigbee" : 1.8.10 , installed 1.8.10 Objects and States Please stand by - This may take a while Objects: 7670 States: 6698 *** OS-Repositories and Updates *** Hit:1 https://downloads.plex.tv/repo/deb public InRelease Hit:2 https://deb.nodesource.com/node_18.x bullseye InRelease Hit:3 https://archive.raspberrypi.org/debian bullseye InRelease Hit:4 https://deb.debian.org/debian bullseye InRelease Hit:5 https://deb.debian.org/debian bullseye-updates InRelease Hit:6 https://deb.debian.org/debian-security bullseye-security InRelease Hit:7 https://deb.debian.org/debian bullseye-backports InRelease Reading package lists... Pending Updates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 12261 840/iobroker.js-con tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 12252 840/iobroker.js-con tcp 0 0 0.0.0.0:53 0.0.0.0:* LISTEN 998 13659 555/pihole-FTL tcp 0 0 127.0.0.1:44021 0.0.0.0:* LISTEN 997 12701 711/Plex Plug-in [c tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 10877 360/dropbear tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 10062 1/init tcp 0 0 127.0.0.1:4711 0.0.0.0:* LISTEN 998 13675 555/pihole-FTL tcp 0 0 0.0.0.0:8888 0.0.0.0:* LISTEN 0 11768 479/perl tcp 0 0 127.0.0.1:6379 0.0.0.0:* LISTEN 105 12499 546/redis-server 12 tcp 0 0 127.0.0.1:32600 0.0.0.0:* LISTEN 997 15048 1533/Plex Tuner Ser tcp 0 0 127.0.0.1:32401 0.0.0.0:* LISTEN 997 11151 557/Plex Media Serv tcp 0 0 0.0.0.0:32469 0.0.0.0:* LISTEN 997 12744 1531/Plex DLNA Serv tcp 0 0 0.0.0.0:1966 0.0.0.0:* LISTEN 997 12737 1531/Plex DLNA Serv tcp 0 0 127.0.0.1:3306 0.0.0.0:* LISTEN 104 11852 627/mariadbd tcp6 0 0 :::53 :::* LISTEN 998 13661 555/pihole-FTL tcp6 0 0 :::22 :::* LISTEN 0 10878 360/dropbear tcp6 0 0 :::111 :::* LISTEN 0 10707 1/init tcp6 0 0 :::80 :::* LISTEN 0 12544 761/apache2 tcp6 0 0 ::1:4711 :::* LISTEN 998 13676 555/pihole-FTL tcp6 0 0 ::1:6379 :::* LISTEN 105 12500 546/redis-server 12 tcp6 0 0 :::5252 :::* LISTEN 0 11099 528/dietpi-dashboar tcp6 0 0 :::32400 :::* LISTEN 997 11149 557/Plex Media Serv tcp6 0 0 :::8081 :::* LISTEN 1001 15784 1497/io.admin.0 tcp6 0 0 :::8082 :::* LISTEN 1001 16308 2087/io.web.0 udp 0 0 192.168.178.20:58105 0.0.0.0:* 997 12708 557/Plex Media Serv udp 0 0 0.0.0.0:37676 0.0.0.0:* 997 16455 1531/Plex DLNA Serv udp 0 0 192.168.178.20:54140 0.0.0.0:* 997 12712 557/Plex Media Serv udp 0 0 127.0.0.1:33700 0.0.0.0:* 997 12707 557/Plex Media Serv udp 0 0 127.0.0.1:35956 0.0.0.0:* 997 12709 557/Plex Media Serv udp 0 0 192.168.178.20:5353 0.0.0.0:* 1001 15354 1829/io.tr-064.0 udp 0 0 0.0.0.0:32410 0.0.0.0:* 997 12704 557/Plex Media Serv udp 0 0 0.0.0.0:32412 0.0.0.0:* 997 12705 557/Plex Media Serv udp 0 0 0.0.0.0:32413 0.0.0.0:* 997 12706 557/Plex Media Serv udp 0 0 0.0.0.0:32414 0.0.0.0:* 997 12703 557/Plex Media Serv udp 0 0 0.0.0.0:1900 0.0.0.0:* 997 12734 1531/Plex DLNA Serv udp 0 0 0.0.0.0:1901 0.0.0.0:* 997 12711 557/Plex Media Serv udp 0 0 0.0.0.0:32818 0.0.0.0:* 997 16445 1531/Plex DLNA Serv udp 0 0 0.0.0.0:53 0.0.0.0:* 998 13658 555/pihole-FTL udp 0 0 0.0.0.0:68 0.0.0.0:* 0 12425 427/dhclient udp 0 0 0.0.0.0:111 0.0.0.0:* 0 893 1/init udp 0 0 192.168.178.20:45295 0.0.0.0:* 997 12710 557/Plex Media Serv udp 0 0 0.0.0.0:8606 0.0.0.0:* 997 12741 1531/Plex DLNA Serv udp6 0 0 :::53 :::* 998 13660 555/pihole-FTL udp6 0 0 :::111 :::* 0 896 1/init *** Log File - Last 25 Lines *** 2023-04-26 16:20:09.506 - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:25:00.124 - info: host.DietPi instance system.adapter.dwd.0 started with pid 39382 2023-04-26 16:25:02.840 - info: dwd.0 (39382) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:25:04.181 - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 39414 2023-04-26 16:25:06.594 - info: dwd.0 (39382) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-04-26 16:25:07.026 - info: netatmo-crawler.0 (39414) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:25:07.112 - info: netatmo-crawler.0 (39414) Getting data for stationid:70:ee:50:65:8b:78 2023-04-26 16:25:07.147 - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:25:08.611 - info: netatmo-crawler.0 (39414) Getting data for stationid:70:ee:50:13:60:32 2023-04-26 16:25:09.907 - info: netatmo-crawler.0 (39414) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-04-26 16:25:10.509 - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:30:00.146 - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 41987 2023-04-26 16:30:03.047 - info: netatmo-crawler.0 (41987) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:30:03.134 - info: netatmo-crawler.0 (41987) Getting data for stationid:70:ee:50:65:8b:78 2023-04-26 16:30:04.215 - info: host.DietPi instance system.adapter.dwd.0 started with pid 42016 2023-04-26 16:30:05.047 - info: netatmo-crawler.0 (41987) Getting data for stationid:70:ee:50:13:60:32 2023-04-26 16:30:06.560 - info: netatmo-crawler.0 (41987) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule 2023-04-26 16:30:07.106 - info: dwd.0 (42016) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:30:07.129 - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:30:08.248 - info: host.DietPi instance system.adapter.luftdaten.0 started with pid 42048 2023-04-26 16:30:09.622 - info: dwd.0 (42016) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2023-04-26 16:30:10.213 - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2023-04-26 16:30:10.815 - info: luftdaten.0 (42048) starting. Version 2.2.4 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v18.16.0, js-controller: 4.0.24 2023-04-26 16:30:21.075 - info: luftdaten.0 (42048) Terminated (NO_ERROR): Without reason 2023-04-26 16:30:21.687 - info: host.DietPi instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR)============ Mark until here for C&P =============
@walter-white Text bitte hier in Codetags setzen ( </> ) :)
Lehrling seit 1975 !!!
Beitrag geholfen ? dann gerne ein upvote rechts unten im Beitrag klicken ;)
https://forum.iobroker.net/topic/51555/hinweise-f%C3%BCr-gute-forenbeitr%C3%A4ge
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden454
Online32.8k
Benutzer82.9k
Themen1.3m
Beiträge