Gezielt gar nicht, aus den diepi Software Bibliotheken wahrscheinlich mit installiert von irgendwas anderem wie Plex oder next Cloud, kann ich ehrlich gesagt nicht sagen.

ich bin nicht @Thomas-Braun

Schaut jetzt konsistent aus.
Die paar Meldungen rühren wohl von DietPi-Eigenheiten her.

load average: 0.34, 0.54, 0.41

gut! nur noch 10% der bisherigen Last!

@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:

Mem: 3.8G 1.4G 904M 42M 1.5G 2.3G

auch hier noch ausreichend Reserve!

@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:

Pending Updates: 0

auch gut!

ich sehe nichts kritisches mehr, heusst aber nichts. ich bin nicht @Thomas-Braun

@walter-white Text bitte hier in Codetags setzen ( </> ) :)

Hat er ;-)
zusätzlich zu den schon im Output vorhandenen.

======== Start marking the full check here =========

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.1
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 16:32:27 up  2:46,  1 user,  load average: 0.34, 0.54, 0.41
CPU threads: 4

Raspberry only:
Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0
Other values than 0x0 hint to temperature/voltage problems
Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0
Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0

*** Time and Time Zones ***
Failed to connect to bus: No such file or directory

*** User and Groups ***
dietpi
/home/dietpi
dietpi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:
Failed to connect to bus: No such file or directory
Boot Target:

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.4G        904M         42M        1.5G        2.3G
Swap:           4.1G          0B        4.1G
Total:          7.9G        1.4G        5.0G

         3844 M total memory
         1414 M used memory
         1744 M active memory
          894 M inactive memory
          904 M free memory
          341 M buffer memory
         1183 M swap cache
         4095 M total swap
            0 M used swap
         4095 M free swap

Raspberry only:
Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      916G  367G  550G  41% /
devtmpfs       devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     1.9G  5.8M  1.9G   1% /dev/shm
tmpfs          tmpfs     769M  8.7M  761M   2% /run
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     2.9G     0  2.9G   0% /tmp
tmpfs          tmpfs      50M   44K   50M   1% /var/log
/dev/mmcblk0p1 vfat      127M   32M   95M  26% /boot

Messages concerning ext4 filesystem in dmesg:
[Wed Apr 26 13:46:00 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 bcm2708_fb.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macaddr=DC:A6:32:5B:7E:AF vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000  root=PARTUUID=44913460-8f3c-4a1b-8c50-6793f20b7a73 rootfstype=ext4 rootwait net.ifnames=0 logo.nologo console=tty1 console=ttyAMA0,115200 console=ttyS0,115200
[Wed Apr 26 13:46:04 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[Wed Apr 26 13:46:04 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[Wed Apr 26 13:46:06 2023] EXT4-fs (sda1): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/sda1      ext4   rw,noatime,lazytime,stripe=8191
`-/boot /dev/mmcblk0p1 vfat   rw,noatime,lazytime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
5.0G    /var/
2.5G    /var/lib/plexmediaserver/Library/Application Support/Plex Media Server
2.5G    /var/lib/plexmediaserver/Library/Application Support
2.5G    /var/lib/plexmediaserver/Library
2.5G    /var/lib/plexmediaserver

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
No journal files were opened due to insufficient permissions.

/opt/iobroker/backups:
14M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
204M    /opt/iobroker/iobroker-data/
137M    /opt/iobroker/iobroker-data/files
51M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/telegram.admin
32M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
24M     /opt/iobroker/iobroker-data/states.jsonl
18M     /opt/iobroker/iobroker-data/objects.jsonl
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js.map
7.2M    /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modules_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a3f.chunk.js
6.9M    /opt/iobroker/iobroker-data/files/telegram.admin/custom/static/js/vendors-node_modules_mui_icons-material_esm_index_js.8fdf8cb7.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v18.16.0
/usr/bin/node           v18.16.0
/usr/bin/npm            9.5.1
/usr/bin/npx            9.5.1


nodejs:
  Installed: 18.16.0-deb-1nodesource1
  Candidate: 18.16.0-deb-1nodesource1
  Version table:
 *** 18.16.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_18.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 https://deb.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 https://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.accuweather.0            : accuweather           : DietPi                                   -  enabled
+ system.adapter.admin.0                  : admin                 : DietPi                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : DietPi                                   -  enabled
+ system.adapter.backitup.0               : backitup              : DietPi                                   -  enabled
+ system.adapter.discovery.0              : discovery             : DietPi                                   -  enabled
  system.adapter.dwd.0                    : dwd                   : DietPi                                   -  enabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : DietPi                                   -  enabled
+ system.adapter.history.0                : history               : DietPi                                   -  enabled
+ system.adapter.hue.0                    : hue                   : DietPi                                   -  enabled, port: 443
+ system.adapter.javascript.0             : javascript            : DietPi                                   -  enabled
  system.adapter.luftdaten.0              : luftdaten             : DietPi                                   -  enabled
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : DietPi                                   -  enabled
+ system.adapter.nina.0                   : nina                  : DietPi                                   -  enabled
+ system.adapter.parcel.0                 : parcel                : DietPi                                   -  enabled
+ system.adapter.parcel.1                 : parcel                : DietPi                                   -  enabled
+ system.adapter.telegram.0               : telegram              : DietPi                                   -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : DietPi                                   -  enabled
+ system.adapter.web.0                    : web                   : DietPi                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : DietPi                                   -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : DietPi                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hue.0                    : hue                   : DietPi                                   -  enabled, port: 443
+ system.adapter.telegram.0               : telegram              : DietPi                                   -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : DietPi                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : DietPi                                   -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.2.1    , installed 1.2.1
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.19   , installed 2.6.19
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "fb-checkpresence": 1.1.26, installed 1.1.26
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hue"          : 3.7.1    , installed 3.7.1
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "luftdaten"    : 2.2.4    , installed 2.2.4
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "parcel"       : 0.0.27   , installed 0.0.27
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        7670
States:         6698

*** OS-Repositories and Updates ***
Hit:1 https://downloads.plex.tv/repo/deb public InRelease
Hit:2 https://deb.nodesource.com/node_18.x bullseye InRelease
Hit:3 https://archive.raspberrypi.org/debian bullseye InRelease
Hit:4 https://deb.debian.org/debian bullseye InRelease
Hit:5 https://deb.debian.org/debian bullseye-updates InRelease
Hit:6 https://deb.debian.org/debian-security bullseye-security InRelease
Hit:7 https://deb.debian.org/debian bullseye-backports InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       12261      840/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       12252      840/iobroker.js-con
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      998        13659      555/pihole-FTL
tcp        0      0 127.0.0.1:44021         0.0.0.0:*               LISTEN      997        12701      711/Plex Plug-in [c
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          10877      360/dropbear
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          10062      1/init
tcp        0      0 127.0.0.1:4711          0.0.0.0:*               LISTEN      998        13675      555/pihole-FTL
tcp        0      0 0.0.0.0:8888            0.0.0.0:*               LISTEN      0          11768      479/perl
tcp        0      0 127.0.0.1:6379          0.0.0.0:*               LISTEN      105        12499      546/redis-server 12
tcp        0      0 127.0.0.1:32600         0.0.0.0:*               LISTEN      997        15048      1533/Plex Tuner Ser
tcp        0      0 127.0.0.1:32401         0.0.0.0:*               LISTEN      997        11151      557/Plex Media Serv
tcp        0      0 0.0.0.0:32469           0.0.0.0:*               LISTEN      997        12744      1531/Plex DLNA Serv
tcp        0      0 0.0.0.0:1966            0.0.0.0:*               LISTEN      997        12737      1531/Plex DLNA Serv
tcp        0      0 127.0.0.1:3306          0.0.0.0:*               LISTEN      104        11852      627/mariadbd
tcp6       0      0 :::53                   :::*                    LISTEN      998        13661      555/pihole-FTL
tcp6       0      0 :::22                   :::*                    LISTEN      0          10878      360/dropbear
tcp6       0      0 :::111                  :::*                    LISTEN      0          10707      1/init
tcp6       0      0 :::80                   :::*                    LISTEN      0          12544      761/apache2
tcp6       0      0 ::1:4711                :::*                    LISTEN      998        13676      555/pihole-FTL
tcp6       0      0 ::1:6379                :::*                    LISTEN      105        12500      546/redis-server 12
tcp6       0      0 :::5252                 :::*                    LISTEN      0          11099      528/dietpi-dashboar
tcp6       0      0 :::32400                :::*                    LISTEN      997        11149      557/Plex Media Serv
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15784      1497/io.admin.0
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       16308      2087/io.web.0
udp        0      0 192.168.178.20:58105    0.0.0.0:*                           997        12708      557/Plex Media Serv
udp        0      0 0.0.0.0:37676           0.0.0.0:*                           997        16455      1531/Plex DLNA Serv
udp        0      0 192.168.178.20:54140    0.0.0.0:*                           997        12712      557/Plex Media Serv
udp        0      0 127.0.0.1:33700         0.0.0.0:*                           997        12707      557/Plex Media Serv
udp        0      0 127.0.0.1:35956         0.0.0.0:*                           997        12709      557/Plex Media Serv
udp        0      0 192.168.178.20:5353     0.0.0.0:*                           1001       15354      1829/io.tr-064.0
udp        0      0 0.0.0.0:32410           0.0.0.0:*                           997        12704      557/Plex Media Serv
udp        0      0 0.0.0.0:32412           0.0.0.0:*                           997        12705      557/Plex Media Serv
udp        0      0 0.0.0.0:32413           0.0.0.0:*                           997        12706      557/Plex Media Serv
udp        0      0 0.0.0.0:32414           0.0.0.0:*                           997        12703      557/Plex Media Serv
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           997        12734      1531/Plex DLNA Serv
udp        0      0 0.0.0.0:1901            0.0.0.0:*                           997        12711      557/Plex Media Serv
udp        0      0 0.0.0.0:32818           0.0.0.0:*                           997        16445      1531/Plex DLNA Serv
udp        0      0 0.0.0.0:53              0.0.0.0:*                           998        13658      555/pihole-FTL
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          12425      427/dhclient
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          893        1/init
udp        0      0 192.168.178.20:45295    0.0.0.0:*                           997        12710      557/Plex Media Serv
udp        0      0 0.0.0.0:8606            0.0.0.0:*                           997        12741      1531/Plex DLNA Serv
udp6       0      0 :::53                   :::*                                998        13660      555/pihole-FTL
udp6       0      0 :::111                  :::*                                0          896        1/init

*** Log File - Last 25 Lines ***

2023-04-26 16:20:09.506  - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-26 16:25:00.124  - info: host.DietPi instance system.adapter.dwd.0 started with pid 39382
2023-04-26 16:25:02.840  - info: dwd.0 (39382) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.16.0, js-controller: 4.0.24
2023-04-26 16:25:04.181  - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 39414
2023-04-26 16:25:06.594  - info: dwd.0 (39382) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-04-26 16:25:07.026  - info: netatmo-crawler.0 (39414) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.16.0, js-controller: 4.0.24
2023-04-26 16:25:07.112  - info: netatmo-crawler.0 (39414) Getting data for stationid:70:ee:50:65:8b:78
2023-04-26 16:25:07.147  - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-26 16:25:08.611  - info: netatmo-crawler.0 (39414) Getting data for stationid:70:ee:50:13:60:32
2023-04-26 16:25:09.907  - info: netatmo-crawler.0 (39414) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2023-04-26 16:25:10.509  - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-26 16:30:00.146  - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 41987
2023-04-26 16:30:03.047  - info: netatmo-crawler.0 (41987) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v18.16.0, js-controller: 4.0.24
2023-04-26 16:30:03.134  - info: netatmo-crawler.0 (41987) Getting data for stationid:70:ee:50:65:8b:78
2023-04-26 16:30:04.215  - info: host.DietPi instance system.adapter.dwd.0 started with pid 42016
2023-04-26 16:30:05.047  - info: netatmo-crawler.0 (41987) Getting data for stationid:70:ee:50:13:60:32
2023-04-26 16:30:06.560  - info: netatmo-crawler.0 (41987) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2023-04-26 16:30:07.106  - info: dwd.0 (42016) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v18.16.0, js-controller: 4.0.24
2023-04-26 16:30:07.129  - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-26 16:30:08.248  - info: host.DietPi instance system.adapter.luftdaten.0 started with pid 42048
2023-04-26 16:30:09.622  - info: dwd.0 (42016) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-04-26 16:30:10.213  - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-26 16:30:10.815  - info: luftdaten.0 (42048) starting. Version 2.2.4 in /opt/iobroker/node_modules/iobroker.luftdaten, node: v18.16.0, js-controller: 4.0.24
2023-04-26 16:30:21.075  - info: luftdaten.0 (42048) Terminated (NO_ERROR): Without reason
2023-04-26 16:30:21.687  - info: host.DietPi instance system.adapter.luftdaten.0 terminated with code 0 (NO_ERROR)

============ Mark until here for C&P =============

So und iobroker hat jetzt node 18, dann ist doch jetzt alles korrekt eingestellt wenn ich das richtig verstehe?

nicht editieren!
habs beim zumachen nur durch Zufall gesehen, dass sich da was änderte.

Das kann man erst sagen wenn man alle Informationen hat!
aka iob diag

NC lädt sowieso nur mit einem Kern hoch,

Norton Commander?

So und iobroker hat jetzt node 18, dann ist doch jetzt alles korrekt eingestellt wenn ich das richtig verstehe?

Node.js: v18.16.0
NPM: 9.5.1

Geht es darum so langsam voran?

möglich!
wäre aber ggf. auch was für @Thomas-Braun

@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:

M.2 bekommt doch von USB 2 nicht genug Saft, und was mache ich jetzt?

aktiven Hub nehmen!?

Doch aus deren software bibliothek,

Ich sehe da nur das nodejs19-Repo, was zu hoch ist und auch so nicht vom iobroker:Installer angelegt wird. Haste also selber reingebügelt. Fragt sich nur warum?

Installier da nodejs18.

Warum?

weil der Pi4 an USB3 hochfrequenzeinstreuungen hat, was zu massiven Störungen des Datenverkehrs führt.

@walter-white sagte in Nach einspielen von Sicherung Telegram & TR-64 Defekt.:

alles ist auf 1TB Externer SSD

hoffentlich nicht an USB3

Warum?

Ist an USB3, eine M.2 in einem Gehäuse.

alles ist auf 1TB Externer SSD

hoffentlich nicht an USB3

Normal ist ca 1GB von 4GB RAM frei, und hab noch 2GB als Z-RAM wenn das mal mehr benötigt, 2GB SWAP die aber nicht benutzt werden sollen, aber man weis ja nie.
CPU ist normal bei ca. 40° und kaum/nicht ausgelastet, ist passiv gekühlt normal temp bei der alten Pi4 revision.
SD karte ist nur Boot, alles ist auf 1TB Externer SSD, die dürfte wenn fertig bei unter 50% Füllstand sein.

Also das legt sich alles wieder wenn das hier mal fertig wird.

Ist das schlimm?

du bist am Anschlag!

load average >4 ist beim pi4 im roten Bereich

Ist das schlimm?

load average: 3.67, 3.92, 3.44

heftig was zu tun?
was läuft da alles?

Skript v.2023-04-16

*** BASE SYSTEM ***
Model           : Raspberry Pi 4 Model B Rev 1.1
Architecture    : aarch64
Docker          : false
Virtualization  : none
Distributor ID: Debian
Description:    Debian GNU/Linux 11 (bullseye)
Release:        11
Codename:       bullseye

PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=debian
HOME_URL="https://www.debian.org/"
SUPPORT_URL="https://www.debian.org/support"
BUG_REPORT_URL="https://bugs.debian.org/"

Systemuptime and Load:
 17:50:03 up 45 min,  1 user,  load average: 3.67, 3.92, 3.44
CPU threads: 4

Raspberry only:
Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0
Other values than 0x0 hint to temperature/voltage problems
Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0
Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0

*** Time and Time Zones ***
Failed to connect to bus: No such file or directory

*** User and Groups ***
dietpi
/home/dietpi
dietpi iobroker

*** X-Server-Setup ***
X-Server:       false
Desktop:
Terminal:
Failed to connect to bus: No such file or directory
Boot Target:

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            3.8G        1.5G        597M         68M        1.8G        2.2G
Swap:           4.1G          0B        4.1G
Total:          7.9G        1.5G        4.7G

         3844 M total memory
         1485 M used memory
         1811 M active memory
         1196 M inactive memory
          595 M free memory
           72 M buffer memory
         1690 M swap cache
         4095 M total swap
            0 M used swap
         4095 M free swap

Raspberry only:
Can't open device file: /dev/vcio
Try creating a device file with: sudo mknod /dev/vcio c 100 0

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
/dev/root      ext4      916G  260G  656G  29% /
devtmpfs       devtmpfs  1.9G     0  1.9G   0% /dev
tmpfs          tmpfs     1.9G  3.5M  1.9G   1% /dev/shm
tmpfs          tmpfs     769M  8.7M  761M   2% /run
tmpfs          tmpfs     5.0M     0  5.0M   0% /run/lock
tmpfs          tmpfs     2.9G   27M  2.9G   1% /tmp
tmpfs          tmpfs      50M   36K   50M   1% /var/log
/dev/mmcblk0p1 vfat      127M   32M   95M  26% /boot

Messages concerning ext4 filesystem in dmesg:
[Tue Apr 25 17:04:12 2023] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm28   35.enable_headphones=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 bcm2708_f   b.fbwidth=0 bcm2708_fb.fbheight=0 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 smsc95xx.macad   dr=DC:A6:32:5B:7E:AF vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000  root=PARTUUID=   44913460-8f3c-4a1b-8c50-6793f20b7a73 rootfstype=ext4 rootwait net.ifnames=0 logo.nologo co   nsole=tty1 console=ttyAMA0,115200
[Tue Apr 25 17:04:15 2023] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quot   a mode: none.
[Tue Apr 25 17:04:15 2023] VFS: Mounted root (ext4 filesystem) readonly on device 8:1.
[Tue Apr 25 17:04:16 2023] EXT4-fs (sda1): re-mounted. Quota mode: none.

Show mounted filesystems (real ones only):
TARGET  SOURCE         FSTYPE OPTIONS
/       /dev/sda1      ext4   rw,noatime,lazytime,stripe=8191
`-/boot /dev/mmcblk0p1 vfat   rw,noatime,lazytime,fmask=0022,dmask=0022,codepage=437,iocha   rset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.8G    /var/
518M    /var/www
509M    /var/www/nextcloud
268M    /var/www/nextcloud/apps
215M    /var/lib

Hint: You are currently not seeing messages from other users and the system.
      Users in groups 'adm', 'systemd-journal' can see all messages.
      Pass -q to turn off this notice.
No journal files were opened due to insufficient permissions.

/opt/iobroker/backups:
11M     /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
165M    /opt/iobroker/iobroker-data/
137M    /opt/iobroker/iobroker-data/files
51M     /opt/iobroker/iobroker-data/files/javascript.admin
48M     /opt/iobroker/iobroker-data/files/telegram.admin
32M     /opt/iobroker/iobroker-data/files/javascript.admin/static/js

The five largest files in iobroker-data are:
15M     /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modu   les_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a   3f.chunk.js.map
11M     /opt/iobroker/iobroker-data/objects.jsonl
7.6M    /opt/iobroker/iobroker-data/states.jsonl
7.2M    /opt/iobroker/iobroker-data/files/telegram.admin/rules/static/js/vendors-node_modu   les_iobroker_adapter-react-v5_assets_devices_parseNames_d_ts-node_modules_io-1d9f06.44fe4a   3f.chunk.js
6.9M    /opt/iobroker/iobroker-data/files/telegram.admin/custom/static/js/vendors-node_mod   ules_mui_icons-material_esm_index_js.8fdf8cb7.chunk.js.map

*** NodeJS-Installation ***

/usr/bin/nodejs         v19.9.0
/usr/bin/node           v19.9.0
/usr/bin/npm            9.6.3
/usr/bin/npx            9.6.3


nodejs:
  Installed: 19.9.0-deb-1nodesource1
  Candidate: 19.9.0-deb-1nodesource1
  Version table:
 *** 19.9.0-deb-1nodesource1 500
        500 https://deb.nodesource.com/node_19.x bullseye/main arm64 Packages
        100 /var/lib/dpkg/status
     12.22.12~dfsg-1~deb11u3 500
        500 https://deb.debian.org/debian-security bullseye-security/main arm64 Packages
     12.22.5~dfsg-2~11u1 500
        500 https://deb.debian.org/debian bullseye/main arm64 Packages

Temp directories causing npm8 problem: 0
No problems detected

*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

MULTIHOSTSERVICE/enabled: false

Core adapters versions
js-controller:  4.0.24
admin:          6.3.5
javascript:     6.1.4

Adapters from github:   0

Adapter State
+ system.adapter.accuweather.0            : accuweather           : DietPi                                   -  enabled
+ system.adapter.admin.0                  : admin                 : DietPi                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : DietPi                                   -  enabled
+ system.adapter.backitup.0               : backitup              : DietPi                                   -  enabled
+ system.adapter.discovery.0              : discovery             : DietPi                                   -  enabled
  system.adapter.dwd.0                    : dwd                   : DietPi                                   -  enabled
+ system.adapter.fb-checkpresence.0       : fb-checkpresence      : DietPi                                   -  enabled
+ system.adapter.history.0                : history               : DietPi                                   -  enabled
+ system.adapter.hue.0                    : hue                   : DietPi                                   -  enabled, port: 443
+ system.adapter.javascript.0             : javascript            : DietPi                                   -  enabled
  system.adapter.luftdaten.0              : luftdaten             : DietPi                                   -  enabled
  system.adapter.netatmo-crawler.0        : netatmo-crawler       : DietPi                                   -  enabled
+ system.adapter.nina.0                   : nina                  : DietPi                                   -  enabled
+ system.adapter.parcel.0                 : parcel                : DietPi                                   -  enabled
+ system.adapter.parcel.1                 : parcel                : DietPi                                   -  enabled
+ system.adapter.telegram.0               : telegram              : DietPi                                   -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : DietPi                                   -  enabled
+ system.adapter.web.0                    : web                   : DietPi                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : DietPi                                   -  enabled, port: /dev/ttyUSB0

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : DietPi                                   -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hue.0                    : hue                   : DietPi                                   -  enabled, port: 443
+ system.adapter.telegram.0               : telegram              : DietPi                                   -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : DietPi                                   -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.0                 : zigbee                : DietPi                                   -  enabled, port: /dev/ttyUSB0

ioBroker-Repositories
stable        : http://download.iobroker.net/sources-dist.json
beta          : http://download.iobroker.net/sources-dist-latest.json

Active repo(s): stable

Installed ioBroker-Instances
Used repository: stable
Adapter    "accuweather"  : 1.2.1    , installed 1.2.1
Adapter    "admin"        : 6.3.5    , installed 6.3.5
Adapter    "alexa2"       : 3.23.2   , installed 3.23.2
Adapter    "backitup"     : 2.6.16   , installed 2.6.16
Adapter    "discovery"    : 3.1.0    , installed 3.1.0
Adapter    "dwd"          : 2.8.3    , installed 2.8.3
Adapter    "fb-checkpresence": 1.1.26, installed 1.1.26
Adapter    "history"      : 2.2.4    , installed 2.2.4
Adapter    "hue"          : 3.7.1    , installed 3.7.1
Adapter    "javascript"   : 6.1.4    , installed 6.1.4
Controller "js-controller": 4.0.24   , installed 4.0.24
Adapter    "luftdaten"    : 2.2.4    , installed 2.2.4
Adapter    "netatmo-crawler": 0.8.1  , installed 0.8.1
Adapter    "nina"         : 0.0.25   , installed 0.0.25
Adapter    "parcel"       : 0.0.27   , installed 0.0.27
Adapter    "simple-api"   : 2.7.2    , installed 2.7.2
Adapter    "socketio"     : 4.2.0    , installed 4.2.0
Adapter    "telegram"     : 1.15.2   , installed 1.15.2
Adapter    "tr-064"       : 4.2.18   , installed 4.2.18
Adapter    "web"          : 4.3.0    , installed 4.3.0
Adapter    "ws"           : 1.3.0    , installed 1.3.0
Adapter    "zigbee"       : 1.8.10   , installed 1.8.10

Objects and States
Please stand by - This may take a while
Objects:        7613
States:         6647

*** OS-Repositories and Updates ***
Hit:1 https://downloads.plex.tv/repo/deb public InRelease
Hit:2 https://deb.nodesource.com/node_19.x bullseye InRelease
Hit:3 https://deb.debian.org/debian bullseye InRelease
Hit:4 https://deb.debian.org/debian bullseye-updates InRelease
Hit:5 https://deb.debian.org/debian-security bullseye-security InRelease
Hit:6 https://archive.raspberrypi.org/debian bullseye InRelease
Hit:7 https://deb.debian.org/debian bullseye-backports InRelease
Reading package lists...
Pending Updates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 127.0.0.1:32600         0.0.0.0:*               LISTEN      997        52966      4850/Plex Tuner Ser
tcp        0      0 0.0.0.0:8888            0.0.0.0:*               LISTEN      0          1785       478/perl
tcp        0      0 127.0.0.1:32401         0.0.0.0:*               LISTEN      997        50097      4708/Plex Media Ser
tcp        0      0 127.0.0.1:3306          0.0.0.0:*               LISTEN      104        13319      627/mariadbd
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          11819      1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          368        362/dropbear
tcp        0      0 0.0.0.0:53              0.0.0.0:*               LISTEN      998        12203      555/pihole-FTL
tcp        0      0 127.0.0.1:39821         0.0.0.0:*               LISTEN      997        54375      4918/Plex Plug-in [
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       808        843/iobroker.js-con
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       776        843/iobroker.js-con
tcp        0      0 0.0.0.0:32469           0.0.0.0:*               LISTEN      997        50165      4849/Plex DLNA Serv
tcp        0      0 127.0.0.1:4711          0.0.0.0:*               LISTEN      998        12209      555/pihole-FTL
tcp        0      0 127.0.0.1:37179         0.0.0.0:*               LISTEN      997        50862      4733/Plex Plug-in [
tcp        0      0 0.0.0.0:1247            0.0.0.0:*               LISTEN      997        50158      4849/Plex DLNA Serv
tcp        0      0 127.0.0.1:6379          0.0.0.0:*               LISTEN      105        486        547/redis-server 12
tcp6       0      0 ::1:4711                :::*                    LISTEN      998        12210      555/pihole-FTL
tcp6       0      0 ::1:6379                :::*                    LISTEN      105        487        547/redis-server 12
tcp6       0      0 :::80                   :::*                    LISTEN      0          13013      748/apache2
tcp6       0      0 :::111                  :::*                    LISTEN      0          12539      1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          369        362/dropbear
tcp6       0      0 :::53                   :::*                    LISTEN      998        12205      555/pihole-FTL
tcp6       0      0 :::8082                 :::*                    LISTEN      1001       20977      1996/io.web.0
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       15861      1502/io.admin.0
tcp6       0      0 :::32400                :::*                    LISTEN      997        50095      4708/Plex Media Ser
tcp6       0      0 :::5252                 :::*                    LISTEN      0          1828       528/dietpi-dashboar
udp        0      0 192.168.178.20:5353     0.0.0.0:*                           1001       16135      1744/io.tr-064.0
udp        0      0 127.0.0.1:50431         0.0.0.0:*                           997        52960      4708/Plex Media Ser
udp        0      0 192.168.178.20:44520    0.0.0.0:*                           997        52963      4708/Plex Media Ser
udp        0      0 192.168.178.20:40439    0.0.0.0:*                           997        52961      4708/Plex Media Ser
udp        0      0 0.0.0.0:46598           0.0.0.0:*                           997        50171      4849/Plex DLNA Serv
udp        0      0 0.0.0.0:32410           0.0.0.0:*                           997        52955      4708/Plex Media Ser
udp        0      0 0.0.0.0:32412           0.0.0.0:*                           997        52956      4708/Plex Media Ser
udp        0      0 0.0.0.0:32413           0.0.0.0:*                           997        52957      4708/Plex Media Ser
udp        0      0 0.0.0.0:32414           0.0.0.0:*                           997        52954      4708/Plex Media Ser
udp        0      0 0.0.0.0:1900            0.0.0.0:*                           997        50155      4849/Plex DLNA Serv
udp        0      0 0.0.0.0:1901            0.0.0.0:*                           997        52962      4708/Plex Media Ser
udp        0      0 0.0.0.0:53              0.0.0.0:*                           998        12202      555/pihole-FTL
udp        0      0 0.0.0.0:68              0.0.0.0:*                           0          388        425/dhclient
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          39         1/init
udp        0      0 127.0.0.1:49458         0.0.0.0:*                           997        52958      4708/Plex Media Ser
udp        0      0 192.168.178.20:45382    0.0.0.0:*                           997        52959      4708/Plex Media Ser
udp        0      0 0.0.0.0:10753           0.0.0.0:*                           997        50162      4849/Plex DLNA Serv
udp        0      0 0.0.0.0:45758           0.0.0.0:*                           997        50168      4849/Plex DLNA Serv
udp6       0      0 :::53                   :::*                                998        12204      555/pihole-FTL
udp6       0      0 :::111                  :::*                                0          42         1/init

*** Log File - Last 25 Lines ***

2023-04-25 17:46:10.862  - info: admin.0 (1502) ==> Connected system.user.admin from ::ffff:192.168.178.54
2023-04-25 17:46:11.294  - info: zigbee.0 (1778) List of port: [{"path":"/dev/ttyUSB0","manufacturer":"Silicon Labs","serialNumber":"0001","pnpId":"usb-Silicon_Labs_Sonoff_Zigbee_3.0_USB_Dongle_Plus_0001-if00-port0","vendorId":"10c4","productId":"ea60"},{"path":"/dev/ttyAMA0"},{"path":"/dev/ttyS0"}]
2023-04-25 17:46:13.265  - info: zigbee.0 (1778) Zigbee: allowing new devices to join.
2023-04-25 17:46:26.868  - warn: zigbee.0 (1778) Device '0x00158d000320d688' announced itself
2023-04-25 17:46:36.536  - warn: zigbee.0 (1778) Device '0x00158d00090e87ed' announced itself
2023-04-25 17:46:53.324  - warn: zigbee.0 (1778) Device '0x00158d0008f13899' announced itself
2023-04-25 17:47:08.010  - warn: zigbee.0 (1778) Device '0x00158d00047b8146' announced itself
2023-04-25 17:47:14.552  - info: zigbee.0 (1778) Zigbee: stop joining
2023-04-25 17:48:30.256  - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54
2023-04-25 17:48:40.284  - info: admin.0 (1502) ==> Connected system.user.admin from ::ffff:192.168.178.54
2023-04-25 17:48:50.465  - info: javascript.0 (1657) Stop script script.js.Eigene.Telegram_Logfile
2023-04-25 17:48:51.717  - info: javascript.0 (1657) Start javascript script.js.Eigene.Telegram_Logfile
2023-04-25 17:48:51.774  - info: javascript.0 (1657) script.js.Eigene.Telegram_Logfile: registered 0 subscriptions, 1 schedule, 0 messages, 0 logs and 0 file subscriptions
2023-04-25 17:49:22.347  - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54 javascript
2023-04-25 17:49:22.363  - info: admin.0 (1502) <== Disconnect system.user.admin from ::ffff:192.168.178.54 admin
2023-04-25 17:50:00.124  - info: host.DietPi instance system.adapter.netatmo-crawler.0 started with pid 13942
2023-04-25 17:50:04.161  - info: host.DietPi instance system.adapter.dwd.0 started with pid 14015
2023-04-25 17:50:05.215  - info: netatmo-crawler.0 (13942) starting. Version 0.8.1 in /opt/iobroker/node_modules/iobroker.netatmo-crawler, node: v19.9.0, js-controller: 4.0.24
2023-04-25 17:50:05.389  - info: netatmo-crawler.0 (13942) Getting data for stationid:70:ee:50:65:8b:78
2023-04-25 17:50:08.045  - info: netatmo-crawler.0 (13942) Getting data for stationid:70:ee:50:13:60:32
2023-04-25 17:50:09.385  - info: dwd.0 (14015) starting. Version 2.8.3 in /opt/iobroker/node_modules/iobroker.dwd, node: v19.9.0, js-controller: 4.0.24
2023-04-25 17:50:09.761  - info: netatmo-crawler.0 (13942) Terminated (ADAPTER_REQUESTED_TERMINATION): Everything done. Going to terminate till next schedule
2023-04-25 17:50:10.348  - info: host.DietPi instance system.adapter.netatmo-crawler.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2023-04-25 17:50:12.874  - info: dwd.0 (14015) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2023-04-25 17:50:13.439  - info: host.DietPi instance system.adapter.dwd.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)

============ Mark until here for C&P =============

iob diag has finished.

Zeig mal die vollständige Ausgabe von

iob diag

@thomas-braun dann ein downgrade machen, oder lassen und dann auf 20 wenn es so weit ist?

wir wissen von deiner Installation: nix!

bitte den Output von iob diag zeigen

in code-tags!