NEWS
Lange Ladezeit vom iobroker
-
Die Brücke des Gehäuses läuft über die USB3-Buchsen (Die blauen).
@paul53
Ja, die SSD steckt mit im Gehäuse, unter der Platine des RPi. -
ich denke das andere Ursachen haben muss das das System nach dem rebooten gut läuft und nach einer gewissen Zeit auf einmal extrem langsam.
-
Wie viele Objekte / States sammeln sich da an?
-
wie kann ich das auslesen? dann kann ich das mal posten
-
Auf den ersten Blick oben rechts im Reiter 'Objekte'.
Für weiteres müsste man bei den einzelnen Adaptern dann schauen. -
-
-
-
[So Jul 17 11:03:17 2022] Booting Linux on physical CPU 0x0 [So Jul 17 11:03:17 2022] Linux version 5.10.92-v7l+ (dom@buildbot) (arm-linux-g nueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ub untu) 2.34) #1514 SMP Mon Jan 17 17:38:03 GMT 2022 [So Jul 17 11:03:17 2022] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr =30c5383d [So Jul 17 11:03:17 2022] CPU: div instructions available: patching division cod e [So Jul 17 11:03:17 2022] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruct ion cache [So Jul 17 11:03:17 2022] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [So Jul 17 11:03:17 2022] random: fast init done [So Jul 17 11:03:17 2022] Memory policy: Data cache writealloc [So Jul 17 11:03:17 2022] Reserved memory: created CMA memory pool at 0x00000000 1ac00000, size 320 MiB [So Jul 17 11:03:17 2022] OF: reserved mem: initialized node linux,cma, compatib le id shared-dma-pool [So Jul 17 11:03:17 2022] Zone ranges: [So Jul 17 11:03:17 2022] DMA [mem 0x0000000000000000-0x000000002fffffff] [So Jul 17 11:03:17 2022] Normal empty [So Jul 17 11:03:17 2022] HighMem [mem 0x0000000030000000-0x00000001ffffffff] [So Jul 17 11:03:17 2022] Movable zone start for each node [So Jul 17 11:03:17 2022] Early memory node ranges [So Jul 17 11:03:17 2022] node 0: [mem 0x0000000000000000-0x000000003b2fffff ] [So Jul 17 11:03:17 2022] node 0: [mem 0x0000000040000000-0x00000000fbffffff ] [So Jul 17 11:03:17 2022] node 0: [mem 0x0000000100000000-0x00000001ffffffff ] [So Jul 17 11:03:17 2022] Initmem setup node 0 [mem 0x0000000000000000-0x0000000 1ffffffff] [So Jul 17 11:03:17 2022] On node 0 totalpages: 2061056 [So Jul 17 11:03:17 2022] DMA zone: 1728 pages used for memmap [So Jul 17 11:03:17 2022] DMA zone: 0 pages reserved [So Jul 17 11:03:17 2022] DMA zone: 196608 pages, LIFO batch:63 [So Jul 17 11:03:17 2022] HighMem zone: 1864448 pages, LIFO batch:63 [So Jul 17 11:03:17 2022] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u819 20 [So Jul 17 11:03:17 2022] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [So Jul 17 11:03:17 2022] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [So Jul 17 11:03:17 2022] Built 1 zonelists, mobility grouping on. Total pages: 2059328 [So Jul 17 11:03:17 2022] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC: A6:32:FD:BB:CC vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tt y1 console=ttyS0,115200 root=PARTUUID=1045efe5-02 rootfstype=ext4 elevator=deadl ine fsck.repair=yes rootwait [So Jul 17 11:03:17 2022] Kernel parameter elevator= does not have any effect an ymore. Please use sysfs to set IO scheduler for individual de vices. [So Jul 17 11:03:17 2022] Dentry cache hash table entries: 131072 (order: 7, 524 288 bytes, linear) [So Jul 17 11:03:17 2022] Inode-cache hash table entries: 65536 (order: 6, 26214 4 bytes, linear) [So Jul 17 11:03:17 2022] mem auto-init: stack:off, heap alloc:off, heap free:of f [So Jul 17 11:03:17 2022] software IO TLB: mapped [mem 0x0000000012400000-0x0000 000016400000] (64MB) [So Jul 17 11:03:17 2022] Memory: 7757552K/8244224K available (10240K kernel cod e, 1366K rwdata, 3196K rodata, 2048K init, 882K bss, 158992K reserved, 327680K c ma-reserved, 7457792K highmem) [So Jul 17 11:03:17 2022] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nod es=1 [So Jul 17 11:03:17 2022] ftrace: allocating 34360 entries in 101 pages [So Jul 17 11:03:17 2022] ftrace: allocated 101 pages with 4 groups [So Jul 17 11:03:17 2022] rcu: Hierarchical RCU implementation. [So Jul 17 11:03:17 2022] Rude variant of Tasks RCU enabled. [So Jul 17 11:03:17 2022] Tracing variant of Tasks RCU enabled. [So Jul 17 11:03:17 2022] rcu: RCU calculated value of scheduler-enlistment dela y is 10 jiffies. [So Jul 17 11:03:17 2022] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [So Jul 17 11:03:17 2022] GIC: Using split EOI/Deactivate mode [So Jul 17 11:03:17 2022] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-con troller@7ef00100, parent irq: 25) [So Jul 17 11:03:17 2022] random: get_random_bytes called from start_kernel+0x3c 8/0x59c with crng_init=1 [So Jul 17 11:03:17 2022] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wr aps every 2147483647500ns [So Jul 17 11:03:17 2022] clocksource: timer: mask: 0xffffffff max_cycles: 0xfff fffff, max_idle_ns: 1911260446275 ns [So Jul 17 11:03:17 2022] bcm2835: system timer (irq = 26) [So Jul 17 11:03:17 2022] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [So Jul 17 11:03:17 2022] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [So Jul 17 11:03:17 2022] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [So Jul 17 11:03:17 2022] Switching to timer-based delay loop, resolution 18ns [So Jul 17 11:03:17 2022] Console: colour dummy device 80x30 [So Jul 17 11:03:17 2022] printk: console [tty1] enabled [So Jul 17 11:03:17 2022] Calibrating delay loop (skipped), value calculated usi ng timer frequency.. 108.00 BogoMIPS (lpj=540000) [So Jul 17 11:03:17 2022] pid_max: default: 32768 minimum: 301 [So Jul 17 11:03:17 2022] LSM: Security Framework initializing [So Jul 17 11:03:17 2022] Mount-cache hash table entries: 2048 (order: 1, 8192 b ytes, linear) [So Jul 17 11:03:17 2022] Mountpoint-cache hash table entries: 2048 (order: 1, 8 192 bytes, linear) [So Jul 17 11:03:17 2022] cgroup: Disabling memory control group subsystem [So Jul 17 11:03:17 2022] CPU: Testing write buffer coherency: ok [So Jul 17 11:03:17 2022] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [So Jul 17 11:03:17 2022] Setting up static identity map for 0x200000 - 0x20003c [So Jul 17 11:03:17 2022] rcu: Hierarchical SRCU implementation. [So Jul 17 11:03:17 2022] smp: Bringing up secondary CPUs ... [So Jul 17 11:03:17 2022] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [So Jul 17 11:03:17 2022] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [So Jul 17 11:03:17 2022] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [So Jul 17 11:03:17 2022] smp: Brought up 1 node, 4 CPUs [So Jul 17 11:03:17 2022] SMP: Total of 4 processors activated (432.00 BogoMIPS) . [So Jul 17 11:03:17 2022] CPU: All CPU(s) started in HYP mode. [So Jul 17 11:03:17 2022] CPU: Virtualization extensions available. [So Jul 17 11:03:17 2022] devtmpfs: initialized [So Jul 17 11:03:17 2022] VFP support v0.3: implementor 41 architecture 3 part 4 0 variant 8 rev 0 [So Jul 17 11:03:17 2022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xf fffffff, max_idle_ns: 19112604462750000 ns [So Jul 17 11:03:17 2022] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [So Jul 17 11:03:17 2022] pinctrl core: initialized pinctrl subsystem [So Jul 17 11:03:17 2022] NET: Registered protocol family 16 [So Jul 17 11:03:17 2022] DMA: preallocated 1024 KiB pool for atomic coherent al locations [So Jul 17 11:03:17 2022] audit: initializing netlink subsys (disabled) [So Jul 17 11:03:17 2022] audit: type=2000 audit(0.030:1): state=initialized aud it_enabled=0 res=1 [So Jul 17 11:03:17 2022] thermal_sys: Registered thermal governor 'step_wise' [So Jul 17 11:03:17 2022] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [So Jul 17 11:03:17 2022] hw-breakpoint: maximum watchpoint size is 8 bytes. [So Jul 17 11:03:17 2022] Serial: AMBA PL011 UART driver [So Jul 17 11:03:17 2022] bcm2835-mbox fe00b880.mailbox: mailbox enabled [So Jul 17 11:03:17 2022] raspberrypi-firmware soc:firmware: Attached to firmwar e from 2022-01-20T13:56:48, variant start [So Jul 17 11:03:17 2022] raspberrypi-firmware soc:firmware: Firmware hash is bd 88f66f8952d34e4e0613a85c7a6d3da49e13e2 [So Jul 17 11:03:17 2022] Kprobes globally optimized [So Jul 17 11:03:17 2022] bcm2835-dma fe007000.dma: DMA legacy API manager, dmac hans=0x1 [So Jul 17 11:03:17 2022] vgaarb: loaded [So Jul 17 11:03:17 2022] SCSI subsystem initialized [So Jul 17 11:03:17 2022] usbcore: registered new interface driver usbfs [So Jul 17 11:03:17 2022] usbcore: registered new interface driver hub [So Jul 17 11:03:17 2022] usbcore: registered new device driver usb [So Jul 17 11:03:17 2022] usb_phy_generic phy: supply vcc not found, using dummy regulator [So Jul 17 11:03:17 2022] clocksource: Switched to clocksource arch_sys_counter [So Jul 17 11:03:18 2022] VFS: Disk quotas dquot_6.6.0 [So Jul 17 11:03:18 2022] VFS: Dquot-cache hash table entries: 1024 (order 0, 40 96 bytes) [So Jul 17 11:03:18 2022] FS-Cache: Loaded [So Jul 17 11:03:18 2022] CacheFiles: Loaded [So Jul 17 11:03:18 2022] NET: Registered protocol family 2 [So Jul 17 11:03:18 2022] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [So Jul 17 11:03:18 2022] tcp_listen_portaddr_hash hash table entries: 512 (orde r: 0, 6144 bytes, linear) [So Jul 17 11:03:18 2022] TCP established hash table entries: 8192 (order: 3, 32 768 bytes, linear) [So Jul 17 11:03:18 2022] TCP bind hash table entries: 8192 (order: 4, 65536 byt es, linear) [So Jul 17 11:03:18 2022] TCP: Hash tables configured (established 8192 bind 819 2) [So Jul 17 11:03:18 2022] UDP hash table entries: 512 (order: 2, 16384 bytes, li near) [So Jul 17 11:03:18 2022] UDP-Lite hash table entries: 512 (order: 2, 16384 byte s, linear) [So Jul 17 11:03:18 2022] NET: Registered protocol family 1 [So Jul 17 11:03:18 2022] RPC: Registered named UNIX socket transport module. [So Jul 17 11:03:18 2022] RPC: Registered udp transport module. [So Jul 17 11:03:18 2022] RPC: Registered tcp transport module. [So Jul 17 11:03:18 2022] RPC: Registered tcp NFSv4.1 backchannel transport modu le. [So Jul 17 11:03:18 2022] PCI: CLS 0 bytes, default 64 [So Jul 17 11:03:18 2022] Initialise system trusted keyrings [So Jul 17 11:03:18 2022] workingset: timestamp_bits=14 max_order=21 bucket_orde r=7 [So Jul 17 11:03:18 2022] zbud: loaded [So Jul 17 11:03:18 2022] FS-Cache: Netfs 'nfs' registered for caching [So Jul 17 11:03:18 2022] NFS: Registering the id_resolver key type [So Jul 17 11:03:18 2022] Key type id_resolver registered [So Jul 17 11:03:18 2022] Key type id_legacy registered [So Jul 17 11:03:18 2022] nfs4filelayout_init: NFSv4 File Layout Driver Register ing... [So Jul 17 11:03:18 2022] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [So Jul 17 11:03:18 2022] Key type asymmetric registered [So Jul 17 11:03:18 2022] Asymmetric key parser 'x509' registered [So Jul 17 11:03:18 2022] bounce: pool size: 64 pages [So Jul 17 11:03:18 2022] Block layer SCSI generic (bsg) driver version 0.4 load ed (major 249) [So Jul 17 11:03:18 2022] io scheduler mq-deadline registered [So Jul 17 11:03:18 2022] io scheduler kyber registered [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d50000 0 ranges: [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: No bus range found for /scb /pcie@7d500000, using [bus 00-ff] [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063f ffffff -> 0x00c0000000 [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bf ffffff -> 0x0400000000 [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SS C) [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:0 0 [So Jul 17 11:03:18 2022] pci_bus 0000:00: root bus resource [bus 00-ff] [So Jul 17 11:03:18 2022] pci_bus 0000:00: root bus resource [mem 0x600000000-0x 63fffffff] (bus address [0xc0000000-0xffffffff]) [So Jul 17 11:03:18 2022] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [So Jul 17 11:03:18 2022] pci 0000:00:00.0: PME# supported from D0 D3hot [So Jul 17 11:03:18 2022] PCI: bus0: Fast back to back transfers disabled [So Jul 17 11:03:18 2022] pci 0000:00:00.0: bridge configuration invalid ([bus 0 0-00]), reconfiguring [So Jul 17 11:03:18 2022] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [So Jul 17 11:03:18 2022] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [So Jul 17 11:03:18 2022] pci 0000:01:00.0: PME# supported from D0 D3hot [So Jul 17 11:03:18 2022] PCI: bus1: Fast back to back transfers disabled [So Jul 17 11:03:18 2022] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [So Jul 17 11:03:18 2022] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6 000fffff] [So Jul 17 11:03:18 2022] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x6 00000fff 64bit] [So Jul 17 11:03:18 2022] pci 0000:00:00.0: PCI bridge to [bus 01] [So Jul 17 11:03:18 2022] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6 000fffff] [So Jul 17 11:03:18 2022] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [So Jul 17 11:03:18 2022] pcieport 0000:00:00.0: PME: Signaling with IRQ 83 [So Jul 17 11:03:18 2022] Serial: 8250/16550 driver, 1 ports, IRQ sharing enable d [So Jul 17 11:03:18 2022] bcm2835-aux-uart fe215040.serial: there is not valid m aps for state default [So Jul 17 11:03:18 2022] iproc-rng200 fe104000.rng: hwrng registered [So Jul 17 11:03:18 2022] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_s ize:0x3ff00000(1023 MiB) [So Jul 17 11:03:18 2022] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registe rs at 0xfe200000 [So Jul 17 11:03:18 2022] brd: module loaded [So Jul 17 11:03:18 2022] loop: module loaded [So Jul 17 11:03:18 2022] Loading iSCSI transport class v2.0-870. [So Jul 17 11:03:18 2022] libphy: Fixed MDIO Bus: probed [So Jul 17 11:03:18 2022] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [So Jul 17 11:03:18 2022] libphy: bcmgenet MII bus: probed [So Jul 17 11:03:18 2022] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [So Jul 17 11:03:18 2022] usbcore: registered new interface driver r8152 [So Jul 17 11:03:18 2022] usbcore: registered new interface driver lan78xx [So Jul 17 11:03:18 2022] usbcore: registered new interface driver smsc95xx [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: xHCI Host Controller [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: new USB bus registered, assigne d bus number 1 [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci versi on 0x100 quirks 0x00000e0000000890 [So Jul 17 11:03:18 2022] usb usb1: New USB device found, idVendor=1d6b, idProdu ct=0002, bcdDevice= 5.10 [So Jul 17 11:03:18 2022] usb usb1: New USB device strings: Mfr=3, Product=2, Se rialNumber=1 [So Jul 17 11:03:18 2022] usb usb1: Product: xHCI Host Controller [So Jul 17 11:03:18 2022] usb usb1: Manufacturer: Linux 5.10.92-v7l+ xhci-hcd [So Jul 17 11:03:18 2022] usb usb1: SerialNumber: 0000:01:00.0 [So Jul 17 11:03:18 2022] hub 1-0:1.0: USB hub found [So Jul 17 11:03:18 2022] hub 1-0:1.0: 1 port detected [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: xHCI Host Controller [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: new USB bus registered, assigne d bus number 2 [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpee d [So Jul 17 11:03:18 2022] usb usb2: New USB device found, idVendor=1d6b, idProdu ct=0003, bcdDevice= 5.10 [So Jul 17 11:03:18 2022] usb usb2: New USB device strings: Mfr=3, Product=2, Se rialNumber=1 [So Jul 17 11:03:18 2022] usb usb2: Product: xHCI Host Controller [So Jul 17 11:03:18 2022] usb usb2: Manufacturer: Linux 5.10.92-v7l+ xhci-hcd [So Jul 17 11:03:18 2022] usb usb2: SerialNumber: 0000:01:00.0 [So Jul 17 11:03:18 2022] hub 2-0:1.0: USB hub found [So Jul 17 11:03:18 2022] hub 2-0:1.0: 4 ports detected [So Jul 17 11:03:18 2022] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [So Jul 17 11:03:18 2022] dwc_otg: FIQ enabled [So Jul 17 11:03:18 2022] dwc_otg: NAK holdoff enabled [So Jul 17 11:03:18 2022] dwc_otg: FIQ split-transaction FSM enabled [So Jul 17 11:03:18 2022] Module dwc_common_port init [So Jul 17 11:03:18 2022] usbcore: registered new interface driver uas [So Jul 17 11:03:18 2022] usbcore: registered new interface driver usb-storage [So Jul 17 11:03:18 2022] mousedev: PS/2 mouse device common for all mice [So Jul 17 11:03:18 2022] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog tim er [So Jul 17 11:03:18 2022] sdhci: Secure Digital Host Controller Interface driver [So Jul 17 11:03:18 2022] sdhci: Copyright(c) Pierre Ossman [So Jul 17 11:03:18 2022] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferri ng probe [So Jul 17 11:03:18 2022] sdhci-pltfm: SDHCI platform and OF driver helper [So Jul 17 11:03:18 2022] ledtrig-cpu: registered to indicate activity on CPUs [So Jul 17 11:03:18 2022] hid: raw HID events driver (C) Jiri Kosina [So Jul 17 11:03:18 2022] usbcore: registered new interface driver usbhid [So Jul 17 11:03:18 2022] usbhid: USB HID core driver [So Jul 17 11:03:18 2022] Initializing XFRM netlink socket [So Jul 17 11:03:18 2022] NET: Registered protocol family 17 [So Jul 17 11:03:18 2022] Key type dns_resolver registered [So Jul 17 11:03:18 2022] Registering SWP/SWPB emulation handler [So Jul 17 11:03:18 2022] registered taskstats version 1 [So Jul 17 11:03:18 2022] Loading compiled-in X.509 certificates [So Jul 17 11:03:18 2022] Key type ._fscrypt registered [So Jul 17 11:03:18 2022] Key type .fscrypt registered [So Jul 17 11:03:18 2022] Key type fscrypt-provisioning registered [So Jul 17 11:03:18 2022] uart-pl011 fe201000.serial: there is not valid maps fo r state default [So Jul 17 11:03:18 2022] uart-pl011 fe201000.serial: cts_event_workaround enabl ed [So Jul 17 11:03:18 2022] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 38, base_baud = 0) is a PL011 rev2 [So Jul 17 11:03:18 2022] bcm2835-aux-uart fe215040.serial: there is not valid m aps for state default [So Jul 17 11:03:18 2022] printk: console [ttyS0] disabled [So Jul 17 11:03:18 2022] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 39, b ase_baud = 62500000) is a 16550 [So Jul 17 11:03:19 2022] printk: console [ttyS0] enabled [So Jul 17 11:03:19 2022] bcm2835-power bcm2835-power: Broadcom BCM2835 power do mains driver [So Jul 17 11:03:19 2022] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [So Jul 17 11:03:19 2022] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [So Jul 17 11:03:19 2022] of_cfs_init [So Jul 17 11:03:19 2022] of_cfs_init: OK [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [So Jul 17 11:03:19 2022] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [So Jul 17 11:03:19 2022] Waiting for root device PARTUUID=1045efe5-02... [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [So Jul 17 11:03:20 2022] usb 1-1: new high-speed USB device number 2 using xhci _hcd [So Jul 17 11:03:20 2022] mmc1: new high speed SDIO card at address 0001 [So Jul 17 11:03:20 2022] usb 1-1: New USB device found, idVendor=2109, idProduc t=3431, bcdDevice= 4.21 [So Jul 17 11:03:20 2022] usb 1-1: New USB device strings: Mfr=0, Product=1, Ser ialNumber=0 [So Jul 17 11:03:20 2022] usb 1-1: Product: USB2.0 Hub [So Jul 17 11:03:20 2022] hub 1-1:1.0: USB hub found [So Jul 17 11:03:20 2022] hub 1-1:1.0: 4 ports detected [So Jul 17 11:03:20 2022] usb 2-1: new SuperSpeed Gen 1 USB device number 2 usin g xhci_hcd [So Jul 17 11:03:20 2022] usb 2-1: New USB device found, idVendor=0781, idProduc t=55a3, bcdDevice= 1.00 [So Jul 17 11:03:20 2022] usb 2-1: New USB device strings: Mfr=1, Product=2, Ser ialNumber=3 [So Jul 17 11:03:20 2022] usb 2-1: Product: SanDisk 3.2Gen1 [So Jul 17 11:03:20 2022] usb 2-1: Manufacturer: USB [So Jul 17 11:03:20 2022] usb 2-1: SerialNumber: 01017c2086c5f43ce99946245926287 f82ddc05644aebdc46473d8f554c3aa6bf25c00000000000000000000ca572d07001c4c00a355810 7bdab5cc6 [So Jul 17 11:03:20 2022] usb-storage 2-1:1.0: USB Mass Storage device detected [So Jul 17 11:03:20 2022] scsi host0: usb-storage 2-1:1.0 [So Jul 17 11:03:20 2022] usb 2-2: new SuperSpeed Gen 1 USB device number 3 usin g xhci_hcd [So Jul 17 11:03:20 2022] usb 2-2: New USB device found, idVendor=174c, idProduc t=1156, bcdDevice= 1.00 [So Jul 17 11:03:20 2022] usb 2-2: New USB device strings: Mfr=2, Product=3, Ser ialNumber=1 [So Jul 17 11:03:20 2022] usb 2-2: Product: Forty [So Jul 17 11:03:20 2022] usb 2-2: Manufacturer: Argon [So Jul 17 11:03:20 2022] usb 2-2: SerialNumber: 0000000000E4 [So Jul 17 11:03:20 2022] scsi host1: uas [So Jul 17 11:03:20 2022] scsi 1:0:0:0: Direct-Access Argon Forty 0 PQ: 0 ANSI: 6 [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: ( 128 GB/119 GiB) [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Write Protect is off [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Write cache: enabled, read cache: en abled, doesn't support DPO or FUA [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Optimal transfer size 33553920 bytes [So Jul 17 11:03:20 2022] usb 1-1.4: new full-speed USB device number 3 using xh ci_hcd [So Jul 17 11:03:20 2022] sda: sda1 sda2 [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Attached SCSI disk [So Jul 17 11:03:20 2022] EXT4-fs (sda2): mounted filesystem with ordered data m ode. Opts: (null) [So Jul 17 11:03:20 2022] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [So Jul 17 11:03:20 2022] devtmpfs: mounted [So Jul 17 11:03:20 2022] Freeing unused kernel memory: 2048K [So Jul 17 11:03:20 2022] Run /sbin/init as init process [So Jul 17 11:03:20 2022] with arguments: [So Jul 17 11:03:20 2022] /sbin/init [So Jul 17 11:03:20 2022] with environment: [So Jul 17 11:03:20 2022] HOME=/ [So Jul 17 11:03:20 2022] TERM=linux [So Jul 17 11:03:20 2022] usb 1-1.4: New USB device found, idVendor=1cf1, idProd uct=0030, bcdDevice= 1.00 [So Jul 17 11:03:20 2022] usb 1-1.4: New USB device strings: Mfr=1, Product=2, S erialNumber=3 [So Jul 17 11:03:20 2022] usb 1-1.4: Product: ConBee II [So Jul 17 11:03:20 2022] usb 1-1.4: Manufacturer: dresden elektronik ingenieurt echnik GmbH [So Jul 17 11:03:20 2022] usb 1-1.4: SerialNumber: DE2414409 [So Jul 17 11:03:21 2022] systemd[1]: System time before build time, advancing c lock. [So Jul 17 11:03:21 2022] NET: Registered protocol family 10 [So Jul 17 11:03:21 2022] Segment Routing with IPv6 [So Jul 17 11:03:21 2022] systemd[1]: systemd 247.3-6+rpi1 running in system mod e. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +G CRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PC RE2 default-hierarchy=unified) [So Jul 17 11:03:21 2022] systemd[1]: Detected architecture arm. [So Jul 17 11:03:21 2022] systemd[1]: Set hostname to <raspberrypi4-iobroker>. [So Jul 17 11:03:21 2022] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2G en1 1.00 PQ: 0 ANSI: 6 [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] 60088320 512-byte logical blocks: (3 0.8 GB/28.7 GiB) [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] Write Protect is off [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] Mode Sense: 43 00 00 00 [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: e nabled, doesn't support DPO or FUA [So Jul 17 11:03:21 2022] sdb: sdb1 [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] Attached SCSI removable disk [So Jul 17 11:03:22 2022] systemd[1]: Queued start job for default target Graphi cal Interface. [So Jul 17 11:03:22 2022] random: systemd: uninitialized urandom read (16 bytes read) [So Jul 17 11:03:22 2022] systemd[1]: Created slice system-getty.slice. [So Jul 17 11:03:22 2022] random: systemd: uninitialized urandom read (16 bytes read) [So Jul 17 11:03:22 2022] systemd[1]: Created slice system-modprobe.slice. [So Jul 17 11:03:22 2022] random: systemd: uninitialized urandom read (16 bytes read) [So Jul 17 11:03:22 2022] systemd[1]: Created slice system-serial\x2dgetty.slice . [So Jul 17 11:03:22 2022] systemd[1]: Created slice system-systemd\x2dfsck.slice . [So Jul 17 11:03:22 2022] systemd[1]: Created slice User and Session Slice. [So Jul 17 11:03:22 2022] systemd[1]: Started Dispatch Password Requests to Cons ole Directory Watch. [So Jul 17 11:03:22 2022] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [So Jul 17 11:03:22 2022] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [So Jul 17 11:03:22 2022] systemd[1]: Reached target Local Encrypted Volumes. [So Jul 17 11:03:22 2022] systemd[1]: Reached target Paths. [So Jul 17 11:03:22 2022] systemd[1]: Reached target Slices. [So Jul 17 11:03:22 2022] systemd[1]: Reached target Swap. [So Jul 17 11:03:22 2022] systemd[1]: Listening on Syslog Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on fsck to fsckd communication S ocket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on initctl Compatibility Named P ipe. [So Jul 17 11:03:22 2022] systemd[1]: Listening on Journal Audit Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on Journal Socket (/dev/log). [So Jul 17 11:03:22 2022] systemd[1]: Listening on Journal Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on udev Control Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on udev Kernel Socket. [So Jul 17 11:03:22 2022] systemd[1]: Condition check resulted in Huge Pages Fil e System being skipped. [So Jul 17 11:03:22 2022] systemd[1]: Mounting POSIX Message Queue File System.. . [So Jul 17 11:03:22 2022] systemd[1]: Mounting RPC Pipe File System... [So Jul 17 11:03:22 2022] systemd[1]: Mounting Kernel Debug File System... [So Jul 17 11:03:23 2022] systemd[1]: Mounting Kernel Trace File System... [So Jul 17 11:03:23 2022] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [So Jul 17 11:03:23 2022] systemd[1]: Starting Restore / save the current clock. .. [So Jul 17 11:03:23 2022] systemd[1]: Starting Set the console keyboard layout.. . [So Jul 17 11:03:23 2022] systemd[1]: Starting Create list of static device node s for the current kernel... [So Jul 17 11:03:23 2022] systemd[1]: Starting Load Kernel Module configfs... [So Jul 17 11:03:23 2022] systemd[1]: Starting Load Kernel Module drm... [So Jul 17 11:03:23 2022] systemd[1]: Starting Load Kernel Module fuse... [So Jul 17 11:03:23 2022] fuse: init (API version 7.32) [So Jul 17 11:03:23 2022] systemd[1]: Condition check resulted in Set Up Additio nal Binary Formats being skipped. [So Jul 17 11:03:23 2022] systemd[1]: Starting File System Check on Root Device. .. [So Jul 17 11:03:23 2022] systemd[1]: Starting Journal Service... [So Jul 17 11:03:23 2022] systemd[1]: Starting Load Kernel Modules... [So Jul 17 11:03:23 2022] systemd[1]: Starting Coldplug All udev Devices... [So Jul 17 11:03:23 2022] systemd[1]: Mounted POSIX Message Queue File System. [So Jul 17 11:03:23 2022] systemd[1]: Mounted RPC Pipe File System. [So Jul 17 11:03:23 2022] systemd[1]: Mounted Kernel Debug File System. [So Jul 17 11:03:23 2022] systemd[1]: Mounted Kernel Trace File System. [So Jul 17 11:03:23 2022] i2c /dev entries driver [So Jul 17 11:03:23 2022] systemd[1]: Finished Restore / save the current clock. [So Jul 17 11:03:23 2022] systemd[1]: Finished Set the console keyboard layout. [So Jul 17 11:03:23 2022] systemd[1]: Finished Create list of static device node s for the current kernel. [So Jul 17 11:03:23 2022] systemd[1]: modprobe@configfs.service: Succeeded. [So Jul 17 11:03:23 2022] systemd[1]: Finished Load Kernel Module configfs. [So Jul 17 11:03:23 2022] systemd[1]: modprobe@drm.service: Succeeded. [So Jul 17 11:03:23 2022] systemd[1]: Finished Load Kernel Module drm. [So Jul 17 11:03:23 2022] systemd[1]: modprobe@fuse.service: Succeeded. [So Jul 17 11:03:23 2022] systemd[1]: Finished Load Kernel Module fuse. [So Jul 17 11:03:23 2022] systemd[1]: Finished Load Kernel Modules. [So Jul 17 11:03:23 2022] systemd[1]: Mounting FUSE Control File System... [So Jul 17 11:03:23 2022] systemd[1]: Mounting Kernel Configuration File System. .. [So Jul 17 11:03:23 2022] systemd[1]: Started File System Check Daemon to report status. [So Jul 17 11:03:23 2022] systemd[1]: Starting Apply Kernel Variables... [So Jul 17 11:03:23 2022] systemd[1]: Mounted FUSE Control File System. [So Jul 17 11:03:23 2022] systemd[1]: Mounted Kernel Configuration File System. [So Jul 17 11:03:23 2022] systemd[1]: Finished File System Check on Root Device. [So Jul 17 11:03:23 2022] systemd[1]: Started Journal Service. [So Jul 17 11:03:24 2022] EXT4-fs (sda2): re-mounted. Opts: (null) [So Jul 17 11:03:24 2022] systemd-journald[145]: Received client request to flus h runtime journal. [So Jul 17 11:03:24 2022] systemd-journald[145]: File /var/log/journal/ceda8666c 83a44189d7d8b22875c3095/system.journal corrupted or uncleanly shut down, renamin g and replacing. [So Jul 17 11:03:25 2022] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initi alised: Registers at 0xfeb00000 length 0x00010000 [So Jul 17 11:03:25 2022] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [So Jul 17 11:03:25 2022] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initi alised: Registers at 0xfeb20000 length 0x00010000 [So Jul 17 11:03:25 2022] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initial ised: Registers at 0xfeb30000 length 0x00010000 [So Jul 17 11:03:25 2022] vc_sm_cma: module is from the staging directory, the q uality is unknown, you have been warned. [So Jul 17 11:03:25 2022] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] bcm2835_vc_sm_cma_probe: Videocore shared memory drive r [So Jul 17 11:03:25 2022] [vc_sm_connected_init]: start [So Jul 17 11:03:25 2022] [vc_sm_connected_init]: installed successfully [So Jul 17 11:03:25 2022] mc: Linux media interface: v0.10 [So Jul 17 11:03:25 2022] bcm2835_audio bcm2835_audio: card created with 8 chann els [So Jul 17 11:03:25 2022] videodev: Linux video capture interface: v2.00 [So Jul 17 11:03:25 2022] bcm2835_mmal_vchiq: module is from the staging directo ry, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] sd 1:0:0:0: Attached scsi generic sg0 type 0 [So Jul 17 11:03:25 2022] sd 0:0:0:0: Attached scsi generic sg1 type 0 [So Jul 17 11:03:25 2022] bcm2835_mmal_vchiq: module is from the staging directo ry, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] bcm2835_v4l2: module is from the staging directory, th e quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] brcmstb-i2c fef04500.i2c: @97500hz registered in poll ing mode [So Jul 17 11:03:25 2022] bcm2835_codec: module is from the staging directory, t he quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] brcmstb-i2c fef09500.i2c: @97500hz registered in poll ing mode [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node output[0] registe red as /dev/video13 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node capture[0] regist ered as /dev/video14 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node capture[1] regist ered as /dev/video15 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node stats[2] register ed as /dev/video16 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register output node 0 with m edia controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Device registered as /dev /video10 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node output[0] registe red as /dev/video20 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Device registered as /dev /video11 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node capture[0] regist ered as /dev/video21 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node capture[1] regist ered as /dev/video22 [So Jul 17 11:03:25 2022] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node stats[2] register ed as /dev/video23 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register output node 0 with m edia controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Device registered as /dev /video12 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [So Jul 17 11:03:25 2022] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4] ) [So Jul 17 11:03:25 2022] usbcore: registered new interface driver cdc_acm [So Jul 17 11:03:25 2022] cdc_acm: USB Abstract Control Model driver for USB mod ems and ISDN adapters [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Device registered as /dev /video18 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [So Jul 17 11:03:25 2022] Registered IR keymap rc-cec [So Jul 17 11:03:25 2022] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/ rc0 [So Jul 17 11:03:25 2022] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/r c0/input0 [So Jul 17 11:03:25 2022] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4] ) [So Jul 17 11:03:25 2022] Registered IR keymap rc-cec [So Jul 17 11:03:25 2022] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/ rc0 [So Jul 17 11:03:25 2022] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/r c0/input1 [So Jul 17 11:03:25 2022] cfg80211: Loading compiled-in X.509 certificates for r egulatory database [So Jul 17 11:03:25 2022] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [So Jul 17 11:03:25 2022] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9c ea7' [So Jul 17 11:03:25 2022] cfg80211: loaded regulatory.db is malformed or signatu re is missing/invalid [So Jul 17 11:03:25 2022] brcmfmac: F1 signature read @0x18000000=0x15264345 [So Jul 17 11:03:25 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4 3455-sdio for chip BCM4345/6 [So Jul 17 11:03:25 2022] usbcore: registered new interface driver brcmfmac [So Jul 17 11:03:25 2022] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4] ) [So Jul 17 11:03:25 2022] Registered IR keymap rc-cec [So Jul 17 11:03:25 2022] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/ rc0 [So Jul 17 11:03:25 2022] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/r c0/input2 [So Jul 17 11:03:26 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4 3455-sdio for chip BCM4345/6 [So Jul 17 11:03:26 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4 3455-sdio for chip BCM4345/6 [So Jul 17 11:03:26 2022] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 w l0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [So Jul 17 11:03:26 2022] random: crng init done [So Jul 17 11:03:26 2022] random: 7 urandom warning(s) missed due to ratelimitin g [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4] ) [So Jul 17 11:03:26 2022] Registered IR keymap rc-cec [So Jul 17 11:03:26 2022] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/ rc0 [So Jul 17 11:03:26 2022] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/r c0/input3 [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc 4]) [So Jul 17 11:03:26 2022] Registered IR keymap rc-cec [So Jul 17 11:03:26 2022] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/ rc1 [So Jul 17 11:03:26 2022] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/r c1/input4 [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc 4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4] ) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_o ps [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_o ps [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_o ps [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_o ps [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_o ps [vc4]) [So Jul 17 11:03:26 2022] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [So Jul 17 11:03:26 2022] vc4-drm gpu: [drm] Cannot find any crtc or sizes [So Jul 17 11:03:28 2022] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [So Jul 17 11:03:29 2022] uart-pl011 fe201000.serial: no DMA platform data [So Jul 17 11:03:29 2022] 8021q: 802.1Q VLAN Support v1.8 [So Jul 17 11:03:29 2022] Adding 102396k swap on /var/swap. Priority:-2 extents :1 across:102396k SSFS [So Jul 17 11:03:30 2022] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save en abled [So Jul 17 11:03:30 2022] bcmgenet fd580000.ethernet: configuring instance for e xternal RGMII (RX delay) [So Jul 17 11:03:30 2022] bcmgenet fd580000.ethernet eth0: Link is Down [So Jul 17 11:03:35 2022] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes rea dy [So Jul 17 11:03:35 2022] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Fu ll - flow control off [So Jul 17 11:03:35 2022] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes read y [So Jul 17 11:03:36 2022] Bluetooth: Core ver 2.22 [So Jul 17 11:03:36 2022] NET: Registered protocol family 31 [So Jul 17 11:03:36 2022] Bluetooth: HCI device and connection manager initializ ed [So Jul 17 11:03:36 2022] Bluetooth: HCI socket layer initialized [So Jul 17 11:03:36 2022] Bluetooth: L2CAP socket layer initialized [So Jul 17 11:03:36 2022] Bluetooth: SCO socket layer initialized [So Jul 17 11:03:36 2022] Bluetooth: HCI UART driver ver 2.3 [So Jul 17 11:03:36 2022] Bluetooth: HCI UART protocol H4 registered [So Jul 17 11:03:36 2022] Bluetooth: HCI UART protocol Three-wire (H5) registere d [So Jul 17 11:03:36 2022] Bluetooth: HCI UART protocol Broadcom registered [So Jul 17 11:03:36 2022] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [So Jul 17 11:03:36 2022] Bluetooth: BNEP filters: protocol multicast [So Jul 17 11:03:36 2022] Bluetooth: BNEP socket layer initialized [So Jul 17 11:03:36 2022] NET: Registered protocol family 38 [So Jul 17 11:03:36 2022] cryptd: max_cpu_qlen set to 1000 [So Jul 17 11:03:38 2022] ICMPv6: process `dhcpcd' is using deprecated sysctl (s yscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ ms instead [So Jul 17 11:03:50 2022] cam-dummy-reg: disabling [So Jul 17 11:03:50 2022] cam1-reg: disabling pi@raspberrypi4-iobroker:~ $
-
Bitte das puTTY-Fenster aufziehen, damit da nicht diese Spalten in den Zeilen sind. Danke.
-
[So Jul 17 11:03:17 2022] Booting Linux on physical CPU 0x0 [So Jul 17 11:03:17 2022] Linux version 5.10.92-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1514 SMP Mon Jan 17 17:38:03 GMT 2022 [So Jul 17 11:03:17 2022] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [So Jul 17 11:03:17 2022] CPU: div instructions available: patching division code [So Jul 17 11:03:17 2022] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [So Jul 17 11:03:17 2022] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [So Jul 17 11:03:17 2022] random: fast init done [So Jul 17 11:03:17 2022] Memory policy: Data cache writealloc [So Jul 17 11:03:17 2022] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [So Jul 17 11:03:17 2022] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [So Jul 17 11:03:17 2022] Zone ranges: [So Jul 17 11:03:17 2022] DMA [mem 0x0000000000000000-0x000000002fffffff] [So Jul 17 11:03:17 2022] Normal empty [So Jul 17 11:03:17 2022] HighMem [mem 0x0000000030000000-0x00000001ffffffff] [So Jul 17 11:03:17 2022] Movable zone start for each node [So Jul 17 11:03:17 2022] Early memory node ranges [So Jul 17 11:03:17 2022] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [So Jul 17 11:03:17 2022] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [So Jul 17 11:03:17 2022] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [So Jul 17 11:03:17 2022] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [So Jul 17 11:03:17 2022] On node 0 totalpages: 2061056 [So Jul 17 11:03:17 2022] DMA zone: 1728 pages used for memmap [So Jul 17 11:03:17 2022] DMA zone: 0 pages reserved [So Jul 17 11:03:17 2022] DMA zone: 196608 pages, LIFO batch:63 [So Jul 17 11:03:17 2022] HighMem zone: 1864448 pages, LIFO batch:63 [So Jul 17 11:03:17 2022] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920 [So Jul 17 11:03:17 2022] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [So Jul 17 11:03:17 2022] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [So Jul 17 11:03:17 2022] Built 1 zonelists, mobility grouping on. Total pages: 2059328 [So Jul 17 11:03:17 2022] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:FD:BB:CC vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff00000 console=tty1 console=ttyS0,115200 root=PARTUUID=1045efe5-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [So Jul 17 11:03:17 2022] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [So Jul 17 11:03:17 2022] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [So Jul 17 11:03:17 2022] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [So Jul 17 11:03:17 2022] mem auto-init: stack:off, heap alloc:off, heap free:off [So Jul 17 11:03:17 2022] software IO TLB: mapped [mem 0x0000000012400000-0x0000000016400000] (64MB) [So Jul 17 11:03:17 2022] Memory: 7757552K/8244224K available (10240K kernel code, 1366K rwdata, 3196K rodata, 2048K init, 882K bss, 158992K reserved, 327680K cma-reserved, 7457792K highmem) [So Jul 17 11:03:17 2022] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [So Jul 17 11:03:17 2022] ftrace: allocating 34360 entries in 101 pages [So Jul 17 11:03:17 2022] ftrace: allocated 101 pages with 4 groups [So Jul 17 11:03:17 2022] rcu: Hierarchical RCU implementation. [So Jul 17 11:03:17 2022] Rude variant of Tasks RCU enabled. [So Jul 17 11:03:17 2022] Tracing variant of Tasks RCU enabled. [So Jul 17 11:03:17 2022] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [So Jul 17 11:03:17 2022] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [So Jul 17 11:03:17 2022] GIC: Using split EOI/Deactivate mode [So Jul 17 11:03:17 2022] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 25) [So Jul 17 11:03:17 2022] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=1 [So Jul 17 11:03:17 2022] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [So Jul 17 11:03:17 2022] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [So Jul 17 11:03:17 2022] bcm2835: system timer (irq = 26) [So Jul 17 11:03:17 2022] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [So Jul 17 11:03:17 2022] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [So Jul 17 11:03:17 2022] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [So Jul 17 11:03:17 2022] Switching to timer-based delay loop, resolution 18ns [So Jul 17 11:03:17 2022] Console: colour dummy device 80x30 [So Jul 17 11:03:17 2022] printk: console [tty1] enabled [So Jul 17 11:03:17 2022] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [So Jul 17 11:03:17 2022] pid_max: default: 32768 minimum: 301 [So Jul 17 11:03:17 2022] LSM: Security Framework initializing [So Jul 17 11:03:17 2022] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [So Jul 17 11:03:17 2022] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [So Jul 17 11:03:17 2022] cgroup: Disabling memory control group subsystem [So Jul 17 11:03:17 2022] CPU: Testing write buffer coherency: ok [So Jul 17 11:03:17 2022] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [So Jul 17 11:03:17 2022] Setting up static identity map for 0x200000 - 0x20003c [So Jul 17 11:03:17 2022] rcu: Hierarchical SRCU implementation. [So Jul 17 11:03:17 2022] smp: Bringing up secondary CPUs ... [So Jul 17 11:03:17 2022] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [So Jul 17 11:03:17 2022] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [So Jul 17 11:03:17 2022] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [So Jul 17 11:03:17 2022] smp: Brought up 1 node, 4 CPUs [So Jul 17 11:03:17 2022] SMP: Total of 4 processors activated (432.00 BogoMIPS). [So Jul 17 11:03:17 2022] CPU: All CPU(s) started in HYP mode. [So Jul 17 11:03:17 2022] CPU: Virtualization extensions available. [So Jul 17 11:03:17 2022] devtmpfs: initialized [So Jul 17 11:03:17 2022] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [So Jul 17 11:03:17 2022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [So Jul 17 11:03:17 2022] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [So Jul 17 11:03:17 2022] pinctrl core: initialized pinctrl subsystem [So Jul 17 11:03:17 2022] NET: Registered protocol family 16 [So Jul 17 11:03:17 2022] DMA: preallocated 1024 KiB pool for atomic coherent allocations [So Jul 17 11:03:17 2022] audit: initializing netlink subsys (disabled) [So Jul 17 11:03:17 2022] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [So Jul 17 11:03:17 2022] thermal_sys: Registered thermal governor 'step_wise' [So Jul 17 11:03:17 2022] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [So Jul 17 11:03:17 2022] hw-breakpoint: maximum watchpoint size is 8 bytes. [So Jul 17 11:03:17 2022] Serial: AMBA PL011 UART driver [So Jul 17 11:03:17 2022] bcm2835-mbox fe00b880.mailbox: mailbox enabled [So Jul 17 11:03:17 2022] raspberrypi-firmware soc:firmware: Attached to firmware from 2022-01-20T13:56:48, variant start [So Jul 17 11:03:17 2022] raspberrypi-firmware soc:firmware: Firmware hash is bd88f66f8952d34e4e0613a85c7a6d3da49e13e2 [So Jul 17 11:03:17 2022] Kprobes globally optimized [So Jul 17 11:03:17 2022] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [So Jul 17 11:03:17 2022] vgaarb: loaded [So Jul 17 11:03:17 2022] SCSI subsystem initialized [So Jul 17 11:03:17 2022] usbcore: registered new interface driver usbfs [So Jul 17 11:03:17 2022] usbcore: registered new interface driver hub [So Jul 17 11:03:17 2022] usbcore: registered new device driver usb [So Jul 17 11:03:17 2022] usb_phy_generic phy: supply vcc not found, using dummy regulator [So Jul 17 11:03:17 2022] clocksource: Switched to clocksource arch_sys_counter [So Jul 17 11:03:18 2022] VFS: Disk quotas dquot_6.6.0 [So Jul 17 11:03:18 2022] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [So Jul 17 11:03:18 2022] FS-Cache: Loaded [So Jul 17 11:03:18 2022] CacheFiles: Loaded [So Jul 17 11:03:18 2022] NET: Registered protocol family 2 [So Jul 17 11:03:18 2022] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [So Jul 17 11:03:18 2022] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [So Jul 17 11:03:18 2022] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [So Jul 17 11:03:18 2022] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [So Jul 17 11:03:18 2022] TCP: Hash tables configured (established 8192 bind 8192) [So Jul 17 11:03:18 2022] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [So Jul 17 11:03:18 2022] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [So Jul 17 11:03:18 2022] NET: Registered protocol family 1 [So Jul 17 11:03:18 2022] RPC: Registered named UNIX socket transport module. [So Jul 17 11:03:18 2022] RPC: Registered udp transport module. [So Jul 17 11:03:18 2022] RPC: Registered tcp transport module. [So Jul 17 11:03:18 2022] RPC: Registered tcp NFSv4.1 backchannel transport module. [So Jul 17 11:03:18 2022] PCI: CLS 0 bytes, default 64 [So Jul 17 11:03:18 2022] Initialise system trusted keyrings [So Jul 17 11:03:18 2022] workingset: timestamp_bits=14 max_order=21 bucket_order=7 [So Jul 17 11:03:18 2022] zbud: loaded [So Jul 17 11:03:18 2022] FS-Cache: Netfs 'nfs' registered for caching [So Jul 17 11:03:18 2022] NFS: Registering the id_resolver key type [So Jul 17 11:03:18 2022] Key type id_resolver registered [So Jul 17 11:03:18 2022] Key type id_legacy registered [So Jul 17 11:03:18 2022] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [So Jul 17 11:03:18 2022] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [So Jul 17 11:03:18 2022] Key type asymmetric registered [So Jul 17 11:03:18 2022] Asymmetric key parser 'x509' registered [So Jul 17 11:03:18 2022] bounce: pool size: 64 pages [So Jul 17 11:03:18 2022] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [So Jul 17 11:03:18 2022] io scheduler mq-deadline registered [So Jul 17 11:03:18 2022] io scheduler kyber registered [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [So Jul 17 11:03:18 2022] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [So Jul 17 11:03:18 2022] pci_bus 0000:00: root bus resource [bus 00-ff] [So Jul 17 11:03:18 2022] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [So Jul 17 11:03:18 2022] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [So Jul 17 11:03:18 2022] pci 0000:00:00.0: PME# supported from D0 D3hot [So Jul 17 11:03:18 2022] PCI: bus0: Fast back to back transfers disabled [So Jul 17 11:03:18 2022] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring [So Jul 17 11:03:18 2022] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [So Jul 17 11:03:18 2022] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [So Jul 17 11:03:18 2022] pci 0000:01:00.0: PME# supported from D0 D3hot [So Jul 17 11:03:18 2022] PCI: bus1: Fast back to back transfers disabled [So Jul 17 11:03:18 2022] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01 [So Jul 17 11:03:18 2022] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [So Jul 17 11:03:18 2022] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [So Jul 17 11:03:18 2022] pci 0000:00:00.0: PCI bridge to [bus 01] [So Jul 17 11:03:18 2022] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [So Jul 17 11:03:18 2022] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [So Jul 17 11:03:18 2022] pcieport 0000:00:00.0: PME: Signaling with IRQ 83 [So Jul 17 11:03:18 2022] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [So Jul 17 11:03:18 2022] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [So Jul 17 11:03:18 2022] iproc-rng200 fe104000.rng: hwrng registered [So Jul 17 11:03:18 2022] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00000(1023 MiB) [So Jul 17 11:03:18 2022] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [So Jul 17 11:03:18 2022] brd: module loaded [So Jul 17 11:03:18 2022] loop: module loaded [So Jul 17 11:03:18 2022] Loading iSCSI transport class v2.0-870. [So Jul 17 11:03:18 2022] libphy: Fixed MDIO Bus: probed [So Jul 17 11:03:18 2022] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [So Jul 17 11:03:18 2022] libphy: bcmgenet MII bus: probed [So Jul 17 11:03:18 2022] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [So Jul 17 11:03:18 2022] usbcore: registered new interface driver r8152 [So Jul 17 11:03:18 2022] usbcore: registered new interface driver lan78xx [So Jul 17 11:03:18 2022] usbcore: registered new interface driver smsc95xx [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: xHCI Host Controller [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x00000e0000000890 [So Jul 17 11:03:18 2022] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [So Jul 17 11:03:18 2022] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [So Jul 17 11:03:18 2022] usb usb1: Product: xHCI Host Controller [So Jul 17 11:03:18 2022] usb usb1: Manufacturer: Linux 5.10.92-v7l+ xhci-hcd [So Jul 17 11:03:18 2022] usb usb1: SerialNumber: 0000:01:00.0 [So Jul 17 11:03:18 2022] hub 1-0:1.0: USB hub found [So Jul 17 11:03:18 2022] hub 1-0:1.0: 1 port detected [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: xHCI Host Controller [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [So Jul 17 11:03:18 2022] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [So Jul 17 11:03:18 2022] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [So Jul 17 11:03:18 2022] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [So Jul 17 11:03:18 2022] usb usb2: Product: xHCI Host Controller [So Jul 17 11:03:18 2022] usb usb2: Manufacturer: Linux 5.10.92-v7l+ xhci-hcd [So Jul 17 11:03:18 2022] usb usb2: SerialNumber: 0000:01:00.0 [So Jul 17 11:03:18 2022] hub 2-0:1.0: USB hub found [So Jul 17 11:03:18 2022] hub 2-0:1.0: 4 ports detected [So Jul 17 11:03:18 2022] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [So Jul 17 11:03:18 2022] dwc_otg: FIQ enabled [So Jul 17 11:03:18 2022] dwc_otg: NAK holdoff enabled [So Jul 17 11:03:18 2022] dwc_otg: FIQ split-transaction FSM enabled [So Jul 17 11:03:18 2022] Module dwc_common_port init [So Jul 17 11:03:18 2022] usbcore: registered new interface driver uas [So Jul 17 11:03:18 2022] usbcore: registered new interface driver usb-storage [So Jul 17 11:03:18 2022] mousedev: PS/2 mouse device common for all mice [So Jul 17 11:03:18 2022] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [So Jul 17 11:03:18 2022] sdhci: Secure Digital Host Controller Interface driver [So Jul 17 11:03:18 2022] sdhci: Copyright(c) Pierre Ossman [So Jul 17 11:03:18 2022] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [So Jul 17 11:03:18 2022] sdhci-pltfm: SDHCI platform and OF driver helper [So Jul 17 11:03:18 2022] ledtrig-cpu: registered to indicate activity on CPUs [So Jul 17 11:03:18 2022] hid: raw HID events driver (C) Jiri Kosina [So Jul 17 11:03:18 2022] usbcore: registered new interface driver usbhid [So Jul 17 11:03:18 2022] usbhid: USB HID core driver [So Jul 17 11:03:18 2022] Initializing XFRM netlink socket [So Jul 17 11:03:18 2022] NET: Registered protocol family 17 [So Jul 17 11:03:18 2022] Key type dns_resolver registered [So Jul 17 11:03:18 2022] Registering SWP/SWPB emulation handler [So Jul 17 11:03:18 2022] registered taskstats version 1 [So Jul 17 11:03:18 2022] Loading compiled-in X.509 certificates [So Jul 17 11:03:18 2022] Key type ._fscrypt registered [So Jul 17 11:03:18 2022] Key type .fscrypt registered [So Jul 17 11:03:18 2022] Key type fscrypt-provisioning registered [So Jul 17 11:03:18 2022] uart-pl011 fe201000.serial: there is not valid maps for state default [So Jul 17 11:03:18 2022] uart-pl011 fe201000.serial: cts_event_workaround enabled [So Jul 17 11:03:18 2022] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 38, base_baud = 0) is a PL011 rev2 [So Jul 17 11:03:18 2022] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [So Jul 17 11:03:18 2022] printk: console [ttyS0] disabled [So Jul 17 11:03:18 2022] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 39, base_baud = 62500000) is a 16550 [So Jul 17 11:03:19 2022] printk: console [ttyS0] enabled [So Jul 17 11:03:19 2022] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [So Jul 17 11:03:19 2022] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [So Jul 17 11:03:19 2022] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [So Jul 17 11:03:19 2022] of_cfs_init [So Jul 17 11:03:19 2022] of_cfs_init: OK [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [So Jul 17 11:03:19 2022] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [So Jul 17 11:03:19 2022] Waiting for root device PARTUUID=1045efe5-02... [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [So Jul 17 11:03:19 2022] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [So Jul 17 11:03:20 2022] usb 1-1: new high-speed USB device number 2 using xhci_hcd [So Jul 17 11:03:20 2022] mmc1: new high speed SDIO card at address 0001 [So Jul 17 11:03:20 2022] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [So Jul 17 11:03:20 2022] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [So Jul 17 11:03:20 2022] usb 1-1: Product: USB2.0 Hub [So Jul 17 11:03:20 2022] hub 1-1:1.0: USB hub found [So Jul 17 11:03:20 2022] hub 1-1:1.0: 4 ports detected [So Jul 17 11:03:20 2022] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd [So Jul 17 11:03:20 2022] usb 2-1: New USB device found, idVendor=0781, idProduct=55a3, bcdDevice= 1.00 [So Jul 17 11:03:20 2022] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [So Jul 17 11:03:20 2022] usb 2-1: Product: SanDisk 3.2Gen1 [So Jul 17 11:03:20 2022] usb 2-1: Manufacturer: USB [So Jul 17 11:03:20 2022] usb 2-1: SerialNumber: 01017c2086c5f43ce99946245926287f82ddc05644aebdc46473d8f554c3aa6bf25c00000000000000000000ca572d07001c4c00a3558107bdab5cc6 [So Jul 17 11:03:20 2022] usb-storage 2-1:1.0: USB Mass Storage device detected [So Jul 17 11:03:20 2022] scsi host0: usb-storage 2-1:1.0 [So Jul 17 11:03:20 2022] usb 2-2: new SuperSpeed Gen 1 USB device number 3 using xhci_hcd [So Jul 17 11:03:20 2022] usb 2-2: New USB device found, idVendor=174c, idProduct=1156, bcdDevice= 1.00 [So Jul 17 11:03:20 2022] usb 2-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1 [So Jul 17 11:03:20 2022] usb 2-2: Product: Forty [So Jul 17 11:03:20 2022] usb 2-2: Manufacturer: Argon [So Jul 17 11:03:20 2022] usb 2-2: SerialNumber: 0000000000E4 [So Jul 17 11:03:20 2022] scsi host1: uas [So Jul 17 11:03:20 2022] scsi 1:0:0:0: Direct-Access Argon Forty 0 PQ: 0 ANSI: 6 [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB) [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Write Protect is off [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Mode Sense: 43 00 00 00 [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Optimal transfer size 33553920 bytes [So Jul 17 11:03:20 2022] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd [So Jul 17 11:03:20 2022] sda: sda1 sda2 [So Jul 17 11:03:20 2022] sd 1:0:0:0: [sda] Attached SCSI disk [So Jul 17 11:03:20 2022] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [So Jul 17 11:03:20 2022] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [So Jul 17 11:03:20 2022] devtmpfs: mounted [So Jul 17 11:03:20 2022] Freeing unused kernel memory: 2048K [So Jul 17 11:03:20 2022] Run /sbin/init as init process [So Jul 17 11:03:20 2022] with arguments: [So Jul 17 11:03:20 2022] /sbin/init [So Jul 17 11:03:20 2022] with environment: [So Jul 17 11:03:20 2022] HOME=/ [So Jul 17 11:03:20 2022] TERM=linux [So Jul 17 11:03:20 2022] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [So Jul 17 11:03:20 2022] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [So Jul 17 11:03:20 2022] usb 1-1.4: Product: ConBee II [So Jul 17 11:03:20 2022] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH [So Jul 17 11:03:20 2022] usb 1-1.4: SerialNumber: DE2414409 [So Jul 17 11:03:21 2022] systemd[1]: System time before build time, advancing clock. [So Jul 17 11:03:21 2022] NET: Registered protocol family 10 [So Jul 17 11:03:21 2022] Segment Routing with IPv6 [So Jul 17 11:03:21 2022] systemd[1]: systemd 247.3-6+rpi1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified) [So Jul 17 11:03:21 2022] systemd[1]: Detected architecture arm. [So Jul 17 11:03:21 2022] systemd[1]: Set hostname to <raspberrypi4-iobroker>. [So Jul 17 11:03:21 2022] scsi 0:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] 60088320 512-byte logical blocks: (30.8 GB/28.7 GiB) [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] Write Protect is off [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] Mode Sense: 43 00 00 00 [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [So Jul 17 11:03:21 2022] sdb: sdb1 [So Jul 17 11:03:21 2022] sd 0:0:0:0: [sdb] Attached SCSI removable disk [So Jul 17 11:03:22 2022] systemd[1]: Queued start job for default target Graphical Interface. [So Jul 17 11:03:22 2022] random: systemd: uninitialized urandom read (16 bytes read) [So Jul 17 11:03:22 2022] systemd[1]: Created slice system-getty.slice. [So Jul 17 11:03:22 2022] random: systemd: uninitialized urandom read (16 bytes read) [So Jul 17 11:03:22 2022] systemd[1]: Created slice system-modprobe.slice. [So Jul 17 11:03:22 2022] random: systemd: uninitialized urandom read (16 bytes read) [So Jul 17 11:03:22 2022] systemd[1]: Created slice system-serial\x2dgetty.slice. [So Jul 17 11:03:22 2022] systemd[1]: Created slice system-systemd\x2dfsck.slice. [So Jul 17 11:03:22 2022] systemd[1]: Created slice User and Session Slice. [So Jul 17 11:03:22 2022] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [So Jul 17 11:03:22 2022] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [So Jul 17 11:03:22 2022] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [So Jul 17 11:03:22 2022] systemd[1]: Reached target Local Encrypted Volumes. [So Jul 17 11:03:22 2022] systemd[1]: Reached target Paths. [So Jul 17 11:03:22 2022] systemd[1]: Reached target Slices. [So Jul 17 11:03:22 2022] systemd[1]: Reached target Swap. [So Jul 17 11:03:22 2022] systemd[1]: Listening on Syslog Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on fsck to fsckd communication Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on initctl Compatibility Named Pipe. [So Jul 17 11:03:22 2022] systemd[1]: Listening on Journal Audit Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on Journal Socket (/dev/log). [So Jul 17 11:03:22 2022] systemd[1]: Listening on Journal Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on udev Control Socket. [So Jul 17 11:03:22 2022] systemd[1]: Listening on udev Kernel Socket. [So Jul 17 11:03:22 2022] systemd[1]: Condition check resulted in Huge Pages File System being skipped. [So Jul 17 11:03:22 2022] systemd[1]: Mounting POSIX Message Queue File System... [So Jul 17 11:03:22 2022] systemd[1]: Mounting RPC Pipe File System... [So Jul 17 11:03:22 2022] systemd[1]: Mounting Kernel Debug File System... [So Jul 17 11:03:23 2022] systemd[1]: Mounting Kernel Trace File System... [So Jul 17 11:03:23 2022] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped. [So Jul 17 11:03:23 2022] systemd[1]: Starting Restore / save the current clock... [So Jul 17 11:03:23 2022] systemd[1]: Starting Set the console keyboard layout... [So Jul 17 11:03:23 2022] systemd[1]: Starting Create list of static device nodes for the current kernel... [So Jul 17 11:03:23 2022] systemd[1]: Starting Load Kernel Module configfs... [So Jul 17 11:03:23 2022] systemd[1]: Starting Load Kernel Module drm... [So Jul 17 11:03:23 2022] systemd[1]: Starting Load Kernel Module fuse... [So Jul 17 11:03:23 2022] fuse: init (API version 7.32) [So Jul 17 11:03:23 2022] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped. [So Jul 17 11:03:23 2022] systemd[1]: Starting File System Check on Root Device... [So Jul 17 11:03:23 2022] systemd[1]: Starting Journal Service... [So Jul 17 11:03:23 2022] systemd[1]: Starting Load Kernel Modules... [So Jul 17 11:03:23 2022] systemd[1]: Starting Coldplug All udev Devices... [So Jul 17 11:03:23 2022] systemd[1]: Mounted POSIX Message Queue File System. [So Jul 17 11:03:23 2022] systemd[1]: Mounted RPC Pipe File System. [So Jul 17 11:03:23 2022] systemd[1]: Mounted Kernel Debug File System. [So Jul 17 11:03:23 2022] systemd[1]: Mounted Kernel Trace File System. [So Jul 17 11:03:23 2022] i2c /dev entries driver [So Jul 17 11:03:23 2022] systemd[1]: Finished Restore / save the current clock. [So Jul 17 11:03:23 2022] systemd[1]: Finished Set the console keyboard layout. [So Jul 17 11:03:23 2022] systemd[1]: Finished Create list of static device nodes for the current kernel. [So Jul 17 11:03:23 2022] systemd[1]: modprobe@configfs.service: Succeeded. [So Jul 17 11:03:23 2022] systemd[1]: Finished Load Kernel Module configfs. [So Jul 17 11:03:23 2022] systemd[1]: modprobe@drm.service: Succeeded. [So Jul 17 11:03:23 2022] systemd[1]: Finished Load Kernel Module drm. [So Jul 17 11:03:23 2022] systemd[1]: modprobe@fuse.service: Succeeded. [So Jul 17 11:03:23 2022] systemd[1]: Finished Load Kernel Module fuse. [So Jul 17 11:03:23 2022] systemd[1]: Finished Load Kernel Modules. [So Jul 17 11:03:23 2022] systemd[1]: Mounting FUSE Control File System... [So Jul 17 11:03:23 2022] systemd[1]: Mounting Kernel Configuration File System... [So Jul 17 11:03:23 2022] systemd[1]: Started File System Check Daemon to report status. [So Jul 17 11:03:23 2022] systemd[1]: Starting Apply Kernel Variables... [So Jul 17 11:03:23 2022] systemd[1]: Mounted FUSE Control File System. [So Jul 17 11:03:23 2022] systemd[1]: Mounted Kernel Configuration File System. [So Jul 17 11:03:23 2022] systemd[1]: Finished File System Check on Root Device. [So Jul 17 11:03:23 2022] systemd[1]: Started Journal Service. [So Jul 17 11:03:24 2022] EXT4-fs (sda2): re-mounted. Opts: (null) [So Jul 17 11:03:24 2022] systemd-journald[145]: Received client request to flush runtime journal. [So Jul 17 11:03:24 2022] systemd-journald[145]: File /var/log/journal/ceda8666c83a44189d7d8b22875c3095/system.journal corrupted or uncleanly shut down, renaming and replacing. [So Jul 17 11:03:25 2022] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [So Jul 17 11:03:25 2022] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [So Jul 17 11:03:25 2022] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [So Jul 17 11:03:25 2022] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [So Jul 17 11:03:25 2022] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [So Jul 17 11:03:25 2022] [vc_sm_connected_init]: start [So Jul 17 11:03:25 2022] [vc_sm_connected_init]: installed successfully [So Jul 17 11:03:25 2022] mc: Linux media interface: v0.10 [So Jul 17 11:03:25 2022] bcm2835_audio bcm2835_audio: card created with 8 channels [So Jul 17 11:03:25 2022] videodev: Linux video capture interface: v2.00 [So Jul 17 11:03:25 2022] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] sd 1:0:0:0: Attached scsi generic sg0 type 0 [So Jul 17 11:03:25 2022] sd 0:0:0:0: Attached scsi generic sg1 type 0 [So Jul 17 11:03:25 2022] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode [So Jul 17 11:03:25 2022] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [So Jul 17 11:03:25 2022] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [So Jul 17 11:03:25 2022] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [So Jul 17 11:03:25 2022] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [So Jul 17 11:03:25 2022] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [So Jul 17 11:03:25 2022] usbcore: registered new interface driver cdc_acm [So Jul 17 11:03:25 2022] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [So Jul 17 11:03:25 2022] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [So Jul 17 11:03:25 2022] Registered IR keymap rc-cec [So Jul 17 11:03:25 2022] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [So Jul 17 11:03:25 2022] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0 [So Jul 17 11:03:25 2022] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [So Jul 17 11:03:25 2022] Registered IR keymap rc-cec [So Jul 17 11:03:25 2022] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [So Jul 17 11:03:25 2022] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input1 [So Jul 17 11:03:25 2022] cfg80211: Loading compiled-in X.509 certificates for regulatory database [So Jul 17 11:03:25 2022] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 1 [So Jul 17 11:03:25 2022] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [So Jul 17 11:03:25 2022] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid [So Jul 17 11:03:25 2022] brcmfmac: F1 signature read @0x18000000=0x15264345 [So Jul 17 11:03:25 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [So Jul 17 11:03:25 2022] usbcore: registered new interface driver brcmfmac [So Jul 17 11:03:25 2022] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [So Jul 17 11:03:25 2022] Registered IR keymap rc-cec [So Jul 17 11:03:25 2022] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [So Jul 17 11:03:25 2022] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input2 [So Jul 17 11:03:26 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [So Jul 17 11:03:26 2022] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [So Jul 17 11:03:26 2022] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60 [So Jul 17 11:03:26 2022] random: crng init done [So Jul 17 11:03:26 2022] random: 7 urandom warning(s) missed due to ratelimiting [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4]) [So Jul 17 11:03:26 2022] Registered IR keymap rc-cec [So Jul 17 11:03:26 2022] rc rc0: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0 [So Jul 17 11:03:26 2022] input: vc4 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input3 [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4]) [So Jul 17 11:03:26 2022] Registered IR keymap rc-cec [So Jul 17 11:03:26 2022] rc rc1: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1 [So Jul 17 11:03:26 2022] input: vc4 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input4 [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4]) [So Jul 17 11:03:26 2022] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4]) [So Jul 17 11:03:26 2022] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 0 [So Jul 17 11:03:26 2022] vc4-drm gpu: [drm] Cannot find any crtc or sizes [So Jul 17 11:03:28 2022] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [So Jul 17 11:03:29 2022] uart-pl011 fe201000.serial: no DMA platform data [So Jul 17 11:03:29 2022] 8021q: 802.1Q VLAN Support v1.8 [So Jul 17 11:03:29 2022] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [So Jul 17 11:03:30 2022] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [So Jul 17 11:03:30 2022] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [So Jul 17 11:03:30 2022] bcmgenet fd580000.ethernet eth0: Link is Down [So Jul 17 11:03:35 2022] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [So Jul 17 11:03:35 2022] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [So Jul 17 11:03:35 2022] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [So Jul 17 11:03:36 2022] Bluetooth: Core ver 2.22 [So Jul 17 11:03:36 2022] NET: Registered protocol family 31 [So Jul 17 11:03:36 2022] Bluetooth: HCI device and connection manager initialized [So Jul 17 11:03:36 2022] Bluetooth: HCI socket layer initialized [So Jul 17 11:03:36 2022] Bluetooth: L2CAP socket layer initialized [So Jul 17 11:03:36 2022] Bluetooth: SCO socket layer initialized [So Jul 17 11:03:36 2022] Bluetooth: HCI UART driver ver 2.3 [So Jul 17 11:03:36 2022] Bluetooth: HCI UART protocol H4 registered [So Jul 17 11:03:36 2022] Bluetooth: HCI UART protocol Three-wire (H5) registered [So Jul 17 11:03:36 2022] Bluetooth: HCI UART protocol Broadcom registered [So Jul 17 11:03:36 2022] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [So Jul 17 11:03:36 2022] Bluetooth: BNEP filters: protocol multicast [So Jul 17 11:03:36 2022] Bluetooth: BNEP socket layer initialized [So Jul 17 11:03:36 2022] NET: Registered protocol family 38 [So Jul 17 11:03:36 2022] cryptd: max_cpu_qlen set to 1000 [So Jul 17 11:03:38 2022] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.eth0.retrans_time - use net.ipv6.neigh.eth0.retrans_time_ms instead [So Jul 17 11:03:50 2022] cam-dummy-reg: disabling [So Jul 17 11:03:50 2022] cam1-reg: disabling
-
@spidermike sagte in Lange Ladezeit vom iobroker:
Bis auf
[So Jul 17 11:03:28 2022] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
soweit nichts auffälliges.
-
@thomas-braun sagte in Lange Ladezeit vom iobroker:
@spidermike sagte in Lange Ladezeit vom iobroker:
Bis auf
[So Jul 17 11:03:28 2022] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
soweit nichts auffälliges.
was muss ich da jetzt machen ?
-
Von Extern (von deinem Windwos aus?) die Partition prüfen.
Ich weiß aber nicht was es da in der Fenster-Welt für gute Tools gibt. -
@thomas-braun sagte in Lange Ladezeit vom iobroker:
Von Extern (von deinem Windwos aus?) die Partition prüfen.
Ich weiß aber nicht was es da in der Fenster-Welt für gute Tools gibt.Ist das die SSD?
-
Das ist die erste Partition auf dem zweiten Datenträger (sdb1).
Vermutlich die SSD dann. -
-
habe jetzt mal google gefragt und das herausbekommen
pi@raspberrypi4-iobroker:~ $ sudo fsck /dev/sdb fsck from util-linux 2.36.1 e2fsck 1.46.2 (28-Feb-2021) /dev/sdb is in use. e2fsck: Cannot continue, aborting.
-
Du kannst keinen fschck auf eingehängten Partitionen durchführen.
Die boot-Partition im laufenden Betrieb auszuhängen ist aber hohe Kunst.
Deswegen ja mein Rat, das von extern auszuführen. -
@thomas-braun sagte in Lange Ladezeit vom iobroker:
Du kannst keinen fschck auf eingehängten Partitionen durchführen.
Die boot-Partition im laufenden Betrieb auszuhängen ist aber hohe Kunst.
Deswegen ja mein Rat, das von extern auszuführen.das heist die SSD ausbauen und an meinen Laptop direkt verbinden ?