Smartmeter: Instanz stürzt nach einer Zeit ab

Glasfaser

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

auf die aktuelle Version aktualisiert.

Kannst du mal Zeigen was du eigentlich alles hast :

iobroker list instances
iobroker list adapters
iobroker update -i

sudo ln -s /usr/bin/node /usr/bin/nodejs
uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs

dmesg -T

top
free -ht --mega

Ich habe 2 USB Leseköpfe an einem Raspberry PI

Welche PI , USB Port mal gewechselt .

MatzeEscher

@glasfaser

Klaro :)

iobroker list instances

 + system.adapter.admin.0                  : admin                 : raspberrypi                              -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.backitup.0               : backitup              : raspberrypi                              -  enabled
+ system.adapter.discovery.0              : discovery             : raspberrypi                              -  enabled
+ system.adapter.influxdb.0               : influxdb              : raspberrypi                              -  enabled, port: 7086
+ system.adapter.javascript.0             : javascript            : raspberrypi                              -  enabled
+ system.adapter.modbus.1                 : modbus                : raspberrypi                              -  enabled
+ system.adapter.node-red.0               : node-red              : raspberrypi                              -  enabled, port: 1880, bind: 0.0.0.0
+ system.adapter.pushover.0               : pushover              : raspberrypi                              -  enabled
+ system.adapter.sma-em.0                 : sma-em                : raspberrypi                              -  enabled
+ system.adapter.smartmeter.0             : smartmeter            : raspberrypi                              -  enabled
+ system.adapter.smartmeter.1             : smartmeter            : raspberrypi                              -  enabled

+ instance is alive

iobroker list adapters

system.adapter.admin                   : admin          - v5.3.8
system.adapter.backitup                : backitup       - v2.4.6
system.adapter.discovery               : discovery      - v3.0.3
system.adapter.influxdb                : influxdb       - v2.6.3
system.adapter.javascript              : javascript     - v5.2.21
system.adapter.modbus                  : modbus         - v4.0.4
system.adapter.node-red                : node-red       - v3.2.0
system.adapter.pushover                : pushover       - v2.1.0
system.adapter.sma-em                  : sma-em         - v0.6.5
system.adapter.smartmeter              : smartmeter     - v3.3.4

iobroker update -i

Adapter    "admin"        : 5.3.8    , installed 5.3.8
Adapter    "backitup"     : 2.4.6    , installed 2.4.6
Adapter    "discovery"    : 3.0.3    , installed 3.0.3
Adapter    "influxdb"     : 2.6.3    , installed 2.6.3
Adapter    "javascript"   : 5.2.21   , installed 5.2.21
Controller "js-controller": 4.0.23   , installed 4.0.23
Adapter    "modbus"       : 4.0.4    , installed 4.0.4
Adapter    "node-red"     : 3.2.0    , installed 3.2.0
Adapter    "pushover"     : 2.1.0    , installed 2.1.0
Adapter    "smartmeter"   : 3.3.4    , installed 3.3.4

sudo ln -s /usr/bin/node /usr/bin/nodejs

 ln: die symbolische Verknüpfung '/usr/bin/nodejs' konnte nicht angelegt werden: Die Datei existiert bereits

uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs

 armv7l
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v12.22.5
v12.22.5
7.5.2
root
/home/pi
OK:1 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
OK:2 http://archive.raspberrypi.org/debian bullseye InRelease
OK:3 https://repos.influxdata.com/debian bullseye InRelease
OK:4 https://download.docker.com/linux/raspbian bullseye InRelease
OK:5 https://archive.raspbian.org/raspbian buster InRelease
Paketlisten werden gelesen… Fertig
Abhängigkeitsbaum wird aufgebaut… Fertig
Statusinformationen werden eingelesen… Fertig
Alle Pakete sind aktuell.
nodejs:
  Installiert:           12.22.5~dfsg-2~11u1
  Installationskandidat: 12.22.5~dfsg-2~11u1
  Versionstabelle:
 *** 12.22.5~dfsg-2~11u1 500
        500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
        100 /var/lib/dpkg/status
     10.24.0~dfsg-1~deb10u1 500
        500 https://archive.raspbian.org/raspbian buster/main armhf Packages

dmesg -T

[Fr Mai 13 10:48:51 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:48:51 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:48:52 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:54 2022] raspberrypi_fw_set_rate: 6 callbacks suppressed
[Fr Mai 13 10:48:54 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:54 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:54 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:55 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:55 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:56 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:56 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:56 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:56 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:48:57 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:00 2022] raspberrypi_fw_set_rate: 8 callbacks suppressed
[Fr Mai 13 10:49:00 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:00 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:00 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:00 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:01 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:01 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:01 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:02 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:02 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:02 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:05 2022] raspberrypi_fw_set_rate: 9 callbacks suppressed
[Fr Mai 13 10:49:05 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:05 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:05 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:06 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:06 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:06 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:06 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:06 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:49:06 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:49:07 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:07 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:08 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:10 2022] raspberrypi_fw_set_rate: 8 callbacks suppressed
[Fr Mai 13 10:49:10 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:10 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:10 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:11 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:11 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:11 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:11 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:21 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:49:21 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:49:29 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-v3d frequency: -12
[Fr Mai 13 10:49:29 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-v3d frequency: -12
[Fr Mai 13 10:49:30 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-v3d frequency: -12
[Fr Mai 13 10:49:30 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-v3d frequency: -12
[Fr Mai 13 10:49:35 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:35 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:36 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:49:36 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:49:51 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:49:51 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:49:53 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:53 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:54 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:54 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:54 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:55 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:55 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:55 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:56 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:56 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:58 2022] raspberrypi_fw_set_rate: 5 callbacks suppressed
[Fr Mai 13 10:49:58 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:58 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:58 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:59 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:59 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:49:59 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:00 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:00 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:00 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:00 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:04 2022] raspberrypi_fw_set_rate: 10 callbacks suppressed
[Fr Mai 13 10:50:04 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:04 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:04 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:05 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:05 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:05 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:05 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:05 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:06 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:06 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:06 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:50:06 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:50:06 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:50:06 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:50:09 2022] raspberrypi_fw_set_rate: 8 callbacks suppressed
[Fr Mai 13 10:50:09 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:09 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:10 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:10 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:10 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:10 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:11 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:11 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:11 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:12 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:14 2022] raspberrypi_fw_set_rate: 8 callbacks suppressed
[Fr Mai 13 10:50:14 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:14 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:15 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:15 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:15 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:15 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:16 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:16 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:16 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:17 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:19 2022] raspberrypi_fw_set_rate: 8 callbacks suppressed
[Fr Mai 13 10:50:19 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:20 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:20 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:20 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:20 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:21 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:21 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:21 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:50:21 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:50:21 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:22 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:22 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:25 2022] raspberrypi_fw_set_rate: 8 callbacks suppressed
[Fr Mai 13 10:50:25 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:25 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:25 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:25 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:26 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12
[Fr Mai 13 10:50:26 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12

top

 top - 10:52:38 up 1 day, 54 min,  3 users,  load average: 1,81, 1,60, 1,27
Tasks: 208 total,   2 running, 206 sleeping,   0 stopped,   0 zombie
%CPU(s): 15,8 us,  3,2 sy,  0,0 ni, 80,0 id,  0,2 wa,  0,0 hi,  0,7 si,  0,0 st
MiB Spch:   3882,5 total,    351,8 free,   1488,6 used,   2042,1 buff/cache
MiB Swap:    500,0 total,    498,0 free,      2,0 used.   2444,0 avail Spch

  PID USER      PR  NI    VIRT    RES    SHR S  %CPU  %MEM     ZEIT+ BEFEHL
  620 influxdb  20   0  993936 182872  28416 S  22,0   4,6  87:13.60 influxd
  966 iobroker  20   0  276136 152352  29360 S  22,0   3,8 254:17.37 node
 2066 iobroker  20   0  246956 120796  33984 S   8,6   3,0  88:06.56 node
 2046 iobroker  20   0  213932  84044  29300 S   8,2   2,1 118:02.15 node
 2248 iobroker  20   0  209376  77600  29232 S   7,6   2,0 107:01.21 node
 2178 iobroker  20   0  213508  80692  30040 S   3,0   2,0  24:36.70 node
12791 508       20   0 1442504 341036  19976 S   3,0   8,6   4:36.26 java
  136 root      20   0  210256 134592 133728 S   1,3   3,4   7:36.16 systemd-journal
 2078 iobroker  20   0  191568  55336  29472 S   0,7   1,4   1:41.66 node
 2151 iobroker  20   0  198120  63944  29352 R   0,7   1,6   5:29.30 node
13413 508       20   0  947512  48588  21960 S   0,7   1,2   0:12.99 mongod
16151 root      20   0   11460   3276   2700 R   0,7   0,1   0:00.17 top
   18 root      20   0       0      0      0 S   0,3   0,0   0:10.49 ksoftirqd/1
15064 root      20   0       0      0      0 I   0,3   0,0   0:00.98 kworker/u8:0-writeback
    1 root      20   0   34864   9068   6964 S   0,0   0,2   0:47.51 systemd
    2 root      20   0       0      0      0 S   0,0   0,0   0:00.21 kthreadd
    3 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 rcu_gp
    4 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 rcu_par_gp
    5 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 netns
    9 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 mm_percpu_wq
   10 root      20   0       0      0      0 S   0,0   0,0   0:00.00 rcu_tasks_rude_
   11 root      20   0       0      0      0 S   0,0   0,0   0:00.00 rcu_tasks_trace
   12 root      20   0       0      0      0 S   0,0   0,0   0:24.52 ksoftirqd/0
   13 root      20   0       0      0      0 I   0,0   0,0   1:01.38 rcu_sched
   14 root      rt   0       0      0      0 S   0,0   0,0   0:00.04 migration/0
   15 root      20   0       0      0      0 S   0,0   0,0   0:00.00 cpuhp/0
   16 root      20   0       0      0      0 S   0,0   0,0   0:00.00 cpuhp/1
   17 root      rt   0       0      0      0 S   0,0   0,0   0:00.03 migration/1
   21 root      20   0       0      0      0 S   0,0   0,0   0:00.00 cpuhp/2
   22 root      rt   0       0      0      0 S   0,0   0,0   0:00.04 migration/2
   23 root      20   0       0      0      0 S   0,0   0,0   0:10.78 ksoftirqd/2
   26 root      20   0       0      0      0 S   0,0   0,0   0:00.00 cpuhp/3
   27 root      rt   0       0      0      0 S   0,0   0,0   0:00.03 migration/3
   28 root      20   0       0      0      0 S   0,0   0,0   0:09.95 ksoftirqd/3
   31 root      20   0       0      0      0 S   0,0   0,0   0:00.01 kdevtmpfs
   32 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 inet_frag_wq
   37 root      20   0       0      0      0 S   0,0   0,0   0:00.00 kauditd
   38 root      20   0       0      0      0 S   0,0   0,0   0:00.12 khungtaskd
   39 root      20   0       0      0      0 S   0,0   0,0   0:00.00 oom_reaper
   40 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 writeback
   41 root      20   0       0      0      0 S   0,0   0,0   0:05.48 kcompactd0
   61 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 kblockd
   62 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 blkcg_punt_bio
   63 root     -51   0       0      0      0 S   0,0   0,0   0:00.00 watchdogd
   66 root       0 -20       0      0      0 I   0,0   0,0   0:00.00 rpciod

free -ht --mega

               gesamt       benutzt     frei      gemns.  Puffer/Cache verfügbar
Speicher:       3,9G        1,5G        350M         13M        2,0G        2,4G
Swap:           499M        2,0M        497M
Gesamt:         4,4G        1,5G        848M

Die Meldung, die bei dmesg -T kommt, könnte wohl etwas mit meinem Problem zu tun haben.

[Fr Mai 13 10:50:06 2022] xhci_hcd 0000:01:00.0: Ring expansion failed
[Fr Mai 13 10:50:06 2022] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
[Fr Mai 13 10:50:09 2022] raspberrypi_fw_set_rate: 8 callbacks suppressed
[Fr Mai 13 10:50:09 2022] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12

Hat die schon einmal jemand gesehen?

MatzeEscher

Das ist außerdem ein Raspberry PI 4B mit 4GB RAM.

USB-Ports habe ich natürlich auch schon einmal umgesteckt.

apollon77

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

Ich denke dmesg ist interessant zu dem "Zeitpunkt wo es kaputt geht reinzuschauen ... also wenn du das mnoch weisst bzw rebooten und laufenlassen und ddann schauen

Glasfaser

@matzeescher

Bitte die Ein-Ausgaben nicht kürzen / bearbeiten .... die ganze Ausgabe davon .
und das ganze wenn du schon netterweise es im Spoiler setzt in Code-Tags </> einbetten.
Kann man dann besser lesen !

Glasfaser

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

v12.22.5
v12.22.5
7.5.2
root
/home/pi

Das passt schonmal nicht !

MatzeEscher

@glasfaser

Habe es quasi nicht gekürzt. Aber da die Meldung im 5 Sekunden Takt kommt und da jeweils dann ca. 8 Einträge generiert werden, gibt es bei dmesg -T keine anderen Einträge.

Code-Tag kommt natürlich nächste mal mit rein.

Glasfaser

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

Habe es quasi nicht gekürzt.

Doch ... da sieht man das du mit root unterwegs bist ...

Was ich mir schon gedacht habe ;)

MatzeEscher

@glasfaser

Kannst du mir sagen, was ich noch einmal senden soll ohne root?

Glasfaser

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

Kannst du mir sagen, was ich noch einmal senden soll ohne root?

Die angefragenen Ausgaben verändern sich nicht dadurch .

Du sollst nur nicht mit dem root arbeiten !

MatzeEscher

@apollon77

Habe versucht die Meldungen von heute Morgen zu finden, als der Adapter ausgestiegen ist. Komme hier aber nur 15 Minuten zurück. Einer eine Idee, wie ich ältere Meldungen bekommen?

arteck

@matzeescher

npm -v

hast du das sauber gezogen .... version 7 ist verkehrt

MatzeEscher

@arteck

Jop. npm habe ich auf die latest Version aktualisiert.

npm -v
8.10.0

Thomas Braun

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

Jop. npm habe ich auf die latest Version aktualisiert.

Du solltest nodejs sauber auf Version 14 bringen, die richtige npm-Version dafür wäre dann 6. Kommt aber eh richtig mit, wenn gescheit installiert wird.

Dann würdest du auch mit dem nodesource-Paket unterwegs sein und nicht mit der dfsg-Variante.

OK:4 https://download.docker.com/linux/raspbian bullseye InRelease
OK:5 https://archive.raspbian.org/raspbian buster InRelease

Du fährst einen gefährlichen Mix aus 'Bullseye' und 'Buster'.
Ändern!

apollon77

@matzeescher Ich glaube das ist auch alles in /var/log/syslog drin?

Homoran

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

Jop. npm habe ich auf die latest Version aktualisiert.

npm8 bei node 12 ist auch nicht besser

spätestens mit der package-lock.json bekommst du bei korrektem downgrade auf v6 Probleme.

MatzeEscher

Danke @Homoran für den Hinweis.

Das Upgrade von NodeJS und das Downgraden von NPM auf 6 hat jetzt dafür gesorgt, dass einige Adapter gar nicht mehr funktionieren.
Ich werde nun wohl erstmal einen neuen PI aufsetzen.

Melde mich wieder.

Homoran

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

dass einige Adapter gar nicht mehr funktionieren.

das wird möglicherweise an der package-lock.json liegen.

die musst du jetzt löschen, weil npmv6 die nicht lesen kann und die Adapter nicht neu für npm v6 bauen kann.

Sollte aber auch entsprechend im log stehen.

MatzeEscher

Hallo zusammen,

so ich habe den PI komplett neu aufgesetzt.

iobrober neu installiert usw.

Nun liefen die Smartmeter Instanzen (2 Stück) ca. einen Tag und haben beide den gleichen Fehler.
Ich könnte jetzt natürlich neu starten, leider hält die Instanz dann wieder nur einen Tag.

Ich hoffe, dass von der Installation jetzt alles passt.

uname -m && which nodejs node npm && nodejs -v && node -v && npm -v && whoami && pwd && sudo apt update &> /dev/null && sudo apt update && apt policy nodejs

armv7l
/usr/bin/nodejs
/usr/bin/node
/usr/bin/npm
v14.19.2
v14.19.2
6.14.17
pi
/home/pi
Hit:1 http://archive.raspberrypi.org/debian bullseye InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian bullseye InRelease
Hit:3 https://repos.influxdata.com/debian bullseye InRelease
Hit:4 https://download.docker.com/linux/raspbian bullseye InRelease
Hit:5 https://deb.nodesource.com/node_14.x bullseye InRelease
Hit:6 https://archive.raspbian.org/raspbian bullseye InRelease
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
2 packages can be upgraded. Run 'apt list --upgradable' to see them.
nodejs:
 Installed: 14.19.2-deb-1nodesource1
 Candidate: 14.19.2-deb-1nodesource1
 Version table:
*** 14.19.2-deb-1nodesource1 500
       500 https://deb.nodesource.com/node_14.x bullseye/main armhf Packages
       100 /var/lib/dpkg/status
    12.22.5~dfsg-2~11u1 500
       500 http://raspbian.raspberrypi.org/raspbian bullseye/main armhf Packages
       500 https://archive.raspbian.org/raspbian bullseye/main armhf Packages

Zum Zeitpunkt des Ausfalls finde ich nur Folgendes im Log ( /var/log/syslog):

May 15 10:10:54 raspberrypi kernel: [154518.756603] xhci_hcd 0000:01:00.0: Ring expansion failed
May 15 10:10:54 raspberrypi kernel: [154518.756615] cp210x ttyUSB0: usb_serial_generic_submit_read_urb - usb_submit_urb failed: -12
May 15 10:10:54 raspberrypi kernel: [154518.904557] raspberrypi-clk soc:firmware:clocks: Failed to change fw-clk-arm frequency: -12

Hat noch jemand eine Idee?

Homoran

@matzeescher sagte in Smartmeter: Instanz stürzt nach einer Zeit ab:

haben beide den gleichen Fehler.

und zwar welchen?

Community Forum

NEWS

Smartmeter: Instanz stürzt nach einer Zeit ab

Support us

690

32.7k

82.5k

1.3m