[Gelöst] Fehlermeldung: File index.html not found
-
@thomas-braun
auch die zweite Version sollte da ja gehen - ich benutze nur Iobroker und Redis:sudo localectl set-locale LANG=Cda tu ich mir etwas leichter
-
@brokeling Ja, setzt aber das ganze System auf die neue LOCALE, d.h. dein Raspberry OS quatscht dann kein Deutsch mehr.
-
@thomas-braun
ich probiere zunächst Version 1.Ich meine ich bin jetzt auf /lib/systemd/system/redis-server.service
Sehe aber kein [Service].pi@raspi:~ $ nano GNU nano 3.2 Neuer Puffer Verändert # redis-server can write to its own config file when in cluster mode so we # permit writing there by default. If you are not using this feature, it is # recommended that you replace the following lines with "ProtectSystem=full". ProtectSystem=true ReadWriteDirectories=-/etc/redis [Install] WantedBy=multi-user.target Alias=redis.serviceJetzt geht es
[Service] Environment="LC_ALL=C" Type=forking ExecStart=/usr/bin/redis-server /etc/redis/redis.conf ExecStop=/bin/kill -s TERM $MAINPID PIDFile=/run/redis/redis-server.pid TimeoutStopSec=0 Restart=always User=redis Group=redis RuntimeDirectory=redis RuntimeDirectoryMode=2755 -
es mag mir trotzdem nicht gelingen:
pi@raspi:~ $ locale LANG=de_DE.UTF-8 LANGUAGE= LC_CTYPE="de_DE.UTF-8" LC_NUMERIC="de_DE.UTF-8" LC_TIME="de_DE.UTF-8" LC_COLLATE="de_DE.UTF-8" LC_MONETARY="de_DE.UTF-8" LC_MESSAGES="de_DE.UTF-8" LC_PAPER="de_DE.UTF-8" LC_NAME="de_DE.UTF-8" LC_ADDRESS="de_DE.UTF-8" LC_TELEPHONE="de_DE.UTF-8" LC_MEASUREMENT="de_DE.UTF-8" LC_IDENTIFICATION="de_DE.UTF-8" LC_ALL= pi@raspi:~ $ sudo systemctl daemon-reload pi@raspi:~ $ sudo systemctl restart redis pi@raspi:~ $ locale LANG=de_DE.UTF-8 LANGUAGE= LC_CTYPE="de_DE.UTF-8" LC_NUMERIC="de_DE.UTF-8" LC_TIME="de_DE.UTF-8" LC_COLLATE="de_DE.UTF-8" LC_MONETARY="de_DE.UTF-8" LC_MESSAGES="de_DE.UTF-8" LC_PAPER="de_DE.UTF-8" LC_NAME="de_DE.UTF-8" LC_ADDRESS="de_DE.UTF-8" LC_TELEPHONE="de_DE.UTF-8" LC_MEASUREMENT="de_DE.UTF-8" LC_IDENTIFICATION="de_DE.UTF-8" LC_ALL= pi@raspi:~ $ -
ok, dafür aber folgender Effekt:
pi@raspi:~ $ redis-cli 127.0.0.1:6379> EVAL "return 'c-i.t' >= 'c.' and 'c-i.t' < 'c.香'" 1 1 (nil) 127.0.0.1:6379>dann kann es ja weitergehen...
-
Jetzt noch ein Problem bei den empfohlenen Adapter Aktualisierungen.
Hier sollte
Admin sollte auf 5.3.1+ aktualisiert sein
welcher aber erst ab js-controller 3.3.22 aktualisiert werden kann, ich habe aber 3.3.21 am Laufen.
Oder ist ein spätere Aktualisierung gemeint? -
Zieh die im Terminal hoch, iobroker kann zuvor gestoppt werden.
iobroker stop iobroker update iobroker upgrade iobroker upgrade self iobroker startmüsste es tun.
-
@thomas-braun
ok, gemacht. Aber ich weiß niht ob da jetzt bei upgrade-self alles glatt gelaufen ist:pi@raspi:~ $ iobroker upgrade self Update js-controller from @3.3.21 to @4.0.21 NPM version: 6.14.16 npm install iobroker.js-controller@4.0.21 --loglevel error --unsafe-perm --prefix "/opt/iobroker" (System call) In file included from ../src/unix_dgram.cc:5: ../../nan/nan.h: In function ‘void Nan::AsyncQueueWorker(Nan::AsyncWorker*)’: ../../nan/nan.h:2298:62: warning: cast between incompatible function types from ‘void (*)(uv_work_t*)’ {aka ‘void (*)(uv_work_s*)’} to ‘uv_after_work_cb’ {aka ‘void (*)(uv_work_s*, int)’} [-Wcast-function-type] , reinterpret_cast<uv_after_work_cb>(AsyncExecuteComplete) ^ In file included from ../../nan/nan.h:54, from ../src/unix_dgram.cc:5: ../src/unix_dgram.cc: At global scope: /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:793:43: warning: cast between incompatible function types from ‘void (*)(v8::Local<v8::Object>)’ to ‘node::addon_register_func’ {aka ‘void (*)(v8::Local<v8::Object>, v8::Local<v8::Value>, void*)’} [-Wcast-function-type] (node::addon_register_func) (regfunc), \ ^ /home/iobroker/.cache/node-gyp/14.19.0/include/node/node.h:827:3: note: in expansion of macro ‘NODE_MODULE_X’ NODE_MODULE_X(modname, regfunc, NULL, 0) // NOLINT (readability/null_usage) ^~~~~~~~~~~~~ ../src/unix_dgram.cc:404:1: note: in expansion of macro ‘NODE_MODULE’ NODE_MODULE(unix_dgram, Initialize) ^~~~~~~~~~~ Server Objects 127.0.0.1:58064 Error from InMemDB: Error: GET-UNSUPPORTED for namespace cfg.: Data=["meta.objects.features.useSets"] Server Objects 127.0.0.1:58064 Error from InMemDB: Error: GET-UNSUPPORTED for namespace cfg.: Data=["meta.objects.protocolVersion"] Server Objects 127.0.0.1:58064 Error from InMemDB: Error: Unknown LUA script load Server Objects 127.0.0.1:58064 Error from InMemDB: Error: Unknown LUA script load Server Objects 127.0.0.1:58064 Error from InMemDB: Error: Unknown LUA script load Server Objects 127.0.0.1:58064 Error from InMemDB: Error: SET-UNSUPPORTED for namespace cfg.: Data=["meta.objects.features.useSets",{"type":"Buffer","data":[49]}] Could not migrate objects to corresponding sets: Error SET-UNSUPPORTED for namespace cfg.: Data=["meta.objects.features.useSets",{"type":"Buffer","data":[49]}] pi@raspi:~ $Ich starte jetzt wieder...
-
Es scheint zu gehen!
Aber mein Shelly Adapter (Konfigration) spinnt noch rum:
File index.html not found -
-
pi@raspi:~ $ iobroker update Used repository: stable Adapter "admin" : 5.3.1 , installed 5.3.1 Adapter "alias-manager": 1.2.4 , installed 1.2.4 Adapter "asterisk" : 1.0.6 , installed 1.0.6 Adapter "backitup" : 2.3.3 , installed 2.3.3 Adapter "chromecast" : 2.3.1 , installed 2.3.1 Adapter "cloud" : 4.1.0 , installed 4.1.0 Adapter "countdown" : 1.2.5 , installed 1.2.5 Adapter "deconz" : 1.3.20 , installed 1.3.20 Adapter "devices" : 1.0.9 , installed 1.0.9 Adapter "digitalstrom" : 2.3.0 , installed 2.2.0 [Updatable] Adapter "discovery" : 2.7.5 , installed 2.7.5 Adapter "fb-checkpresence": 1.1.13, installed 1.1.13 Adapter "feiertage" : 1.1.0 , installed 1.1.0 Adapter "flot" : 1.10.7 , installed 1.10.7 Adapter "fritzdect" : 2.2.3 , installed 2.2.3 Adapter "history" : 1.10.5 , installed 1.10.5 Adapter "hue" : 3.6.5 , installed 3.5.19 [Updatable] Adapter "hue-extended" : 2.0.0 , installed 2.0.0 Adapter "ical" : 1.11.4 , installed 1.11.4 Adapter "icons-icons8" : 0.0.1 , installed 0.0.1 Adapter "icons-mfd-svg": 1.0.2 , installed 1.0.2 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "info" : 1.9.8 , installed 1.9.8 Adapter "iqontrol" : 2.0.0 , installed 2.0.0 Adapter "javascript" : 5.2.21 , installed 5.2.21 Controller "js-controller": 4.0.21 , installed 4.0.21 Adapter "luftdaten" : 2.1.3 , installed 1.0.3 [Updatable] Adapter "moma" : 1.2.9 , installed 1.2.9 Adapter "mqtt" : 2.4.1 , installed 2.4.1 Adapter "mydlink" : 1.1.12 , installed 1.1.12 Adapter "net-tools" : 0.1.7 , installed 0.1.7 Adapter "netatmo-crawler": 0.8.1 , installed 0.8.1 Adapter "nuki" : 1.6.0 , installed 1.6.0 Adapter "nuki-extended": 2.3.1 , installed 2.3.1 Adapter "octoprint" : 2.1.0 , installed 1.1.1 [Updatable] Adapter "paw" : 0.3.2 , installed 0.3.2 Adapter "ph803w" : 1.0.1 , installed 1.0.1 Adapter "ping" : 1.5.0 , installed 1.5.0 Adapter "pushover" : 2.0.5 , installed 2.0.5 Adapter "samsung" : 0.2.9 , installed 0.2.9 Adapter "sayit" : 1.12.3 , installed 1.12.3 Adapter "shelly" : 5.3.2 , installed 5.3.2 Adapter "simple-api" : 2.6.2 , installed 2.6.2 Adapter "smartcontrol" : 1.2.1 , installed 1.2.1 Adapter "socketio" : 3.1.5 , installed 3.1.5 Adapter "sonoff" : 2.4.7 , installed 2.4.7 Adapter "spotify-premium": 1.0.0 , installed 1.0.0 Adapter "sql" : 1.16.1 , installed 1.16.1 Adapter "statistics" : 1.0.9 , installed 1.0.9 Adapter "telegram" : 1.11.1 , installed 1.11.1 Adapter "text2command" : 2.1.1 , installed 2.1.1 Adapter "tr-064" : 4.2.15 , installed 4.2.12 [Updatable] Adapter "vis" : 1.4.5 , installed 1.4.5 Adapter "vis-colorpicker": 1.2.0 , installed 1.2.0 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-google-fonts": 1.0.3 , installed 0.1.0 [Updatable] Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.1.9 , installed 1.1.7 [Updatable] Adapter "vis-icontwo" : 0.87.0 , installed 0.87.0 Adapter "vis-justgage" : 1.0.2 , installed 1.0.2 Adapter "vis-material-advanced": 1.7.2, installed 1.7.2 Adapter "vis-metro" : 1.1.2 , installed 1.1.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vis-timeandweather": 1.1.7, installed 1.1.7 Adapter "web" : 3.4.16 , installed 3.4.16 Adapter "whatsapp-cmb" : 0.1.6 , installed 0.1.6 Adapter "zigbee" : 1.6.16 , installed 1.6.16 pi@raspi:~ $Den Admin habe ich manuell auf 5.3.1 geupdated.
Trotzdem noch kein Erfolg. -
Du solltest doch zuvor ALLE Adapter hochziehen.
-
@thomas-braun
war mir nicht so bewusst.
Jetzt noch?
Die nicht hochgezogenen sind mir eher überflüssig. -
Zieh es hoch. Grundsätzlich hält man das Gesamtkonstrukt konsistent.
-
Und dann mal ein
iob upload allBrowser cache löschen
-
pi@raspi:~ $ Iob Upload all -bash: Iob: Kommando nicht gefunden. -
-
@wendy2702
jetzt macht er. Aber es dauert! -
-
@wendy2702
ok, ist durch, aber hat leider nichts gebracht.
