Neuer ioBroker-Blog online: Monatsrückblick März/April 2026

[paul53]

@labamba
Bitte alles in einen Trigger packen!

@labamba sagte in Angabe von Zeitraum im Jahr im Blockly!:

der Jahresbereich vom 16.09-14.5 Probleme macht.

Die Bereiche ab 16.09. und bis 14.05. müssen per ODER verknüpft werden. Einfacher:

Worin unterscheiden sich die Aktionen im Winter vom Sommer?

[LaBamba]

@paul53

Die Idee ist gut, aber ich benötige das sonst für mein Timeout und die zyklische Unterbrechung. Zudem habe ich im Sommer noch mehr Fälle nach Uhrzeit.

[paul53]

@labamba sagte: ich benötige das sonst für mein Timeout und die zyklische Unterbrechung.

Das "sonst" ist weiterhin für das Stoppen der Timer vorhanden.

Du hast meine Frage nicht beantwortet:
@paul53 sagte in Angabe von Zeitraum im Jahr im Blockly!:

Worin unterscheiden sich die Aktionen im Winter vom Sommer?

[LaBamba]

@paul53

Die Aktionen im Sommer und Winter unterscheiden sich durch den Lüftungszeitraum.
Die Lüftungszeiträume sind von der Außentemperatur dann nochmals abhängig.

Zudem habe ich im Sommer noch einen Fall, z.B. Lüften vor 9 Uhr und nach 9 Uhr.
Damit ich bei sehr warmen Temperaturen das Gebäude kühlen kann und nicht zu warme Luft hereinlüfte.

[paul53]

@labamba
Danke. Das alles ist in Deinem Blockly-Bild nicht zu erkennen.

[LaBamba]

@paul53

So mal das Ganze! Ich dachte ich begrenze es bzgl. der Übersichtlichkeit.
Ich habe gerade festgestellt, dass ich es nicht Spoilern kann da es zu groß hier ist.

[paul53]

@labamba sagte: Ich habe gerade festgestellt, dass ich es nicht Spoilern kann da es zu groß hier ist.

Auch mit Spoiler und Code tags?
XML bitte immer in Code tags posten.

[LaBamba]

@paul53
Ja , kommt immer longer than 100000 charakters

[paul53]

@labamba sagte: kommt immer longer than 100000 charakters

Kannst Du mehrere Bilder untereinander posten, so dass es noch erkennbar ist?

[paul53]

@labamba
Man kann sicherlich einige Aktionen für Sommer und Winter zusammenfassen?

[paul53]

@labamba sagte: kommt immer longer than 100000 charakters

Wie sieht es mit dem erzeugten Javascript-Code ohne die letzte Zeile aus (Code tags!)?

[LaBamba]

@paul53

var timeout, Intervall, timeout11, Intervall11, timeout12, Intervall12, timeout13, Intervall13, timeout14, Intervall14, timeout15, Intervall15;


// <=5
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 5) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 4 Minuten'].join('')), 1000, false);
    timeout = setTimeout(async function () {
      Intervall = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 60000);
    }, 180000);
  } else {
    (function () {if (timeout) {clearTimeout(timeout); timeout = null;}})();
    (function () {if (Intervall) {clearInterval(Intervall); Intervall = null;}})();
  }
});
// >5-<=10
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 5 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 10) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 6 Minuten'].join('')), 1000, false);
    timeout11 = setTimeout(async function () {
      Intervall11 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 240000);
  } else {
    (function () {if (timeout11) {clearTimeout(timeout11); timeout11 = null;}})();
    (function () {if (Intervall11) {clearInterval(Intervall11); Intervall11 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") < '05/15' && formatDate(new Date(), "MM/DD") > '09/15' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 5 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 10) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 5 Minuten'].join('')), 1000, false);
    timeout12 = setTimeout(async function () {
      Intervall12 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 60000);
    }, 240000);
  } else {
    (function () {if (timeout12) {clearTimeout(timeout12); timeout12 = null;}})();
    (function () {if (Intervall12) {clearInterval(Intervall12); Intervall12 = null;}})();
  }
});
// >10-<=15
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '15/09' && compareTime('00:00', '09:30', "between", null) && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 10 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 15) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 12 Minuten'].join('')), 1000, false);
    timeout13 = setTimeout(async function () {
      Intervall13 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 600000);
  } else {
    (function () {if (timeout13) {clearTimeout(timeout13); timeout13 = null;}})();
    (function () {if (Intervall13) {clearInterval(Intervall13); Intervall13 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '15/09' && compareTime('9:31', '23:59', "between", null) && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 10 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 15) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 9 Minuten'].join('')), 1000, false);
    timeout14 = setTimeout(async function () {
      Intervall14 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 420000);
  } else {
    (function () {if (timeout14) {clearTimeout(timeout14); timeout14 = null;}})();
    (function () {if (Intervall14) {clearInterval(Intervall14); Intervall14 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") < '05/15' && formatDate(new Date(), "MM/DD") > '15/09' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 10 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 15) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 7 Minuten'].join('')), 1000, false);
    timeout15 = setTimeout(async function () {
      Intervall15 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 300000);
  } else {
    (function () {if (timeout15) {clearTimeout(timeout15); timeout15 = null;}})();
    (function () {if (Intervall15) {clearInterval(Intervall15); Intervall15 = null;}})();
  }
});

formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '09/15' && true;

getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val;

getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val;

[paul53]

@labamba
Mit nur einem Trigger und einigen Variablen:

Spoiler

<xml xmlns="https://developers.google.com/blockly/xml">
 <variables>
   <variable id="]QNA]6mC/m=YN4#MWOV;">AT</variable>
   <variable id="4RnZsx32p9:0WHh7`},t">delay</variable>
   <variable id="zL[s}0F!ZKt(|[4;3urB">erinnern</variable>
   <variable id="!$%d@O83Ka[rhkXU1dP%">repeat</variable>
   <variable type="timeout" id="timeout">timeout</variable>
   <variable type="interval" id="Intervall">Intervall</variable>
 </variables>
 <block type="on_ext" id="j/`@HZdJ~17vrQ9X7RO7" x="248" y="242">
   <mutation xmlns="http://www.w3.org/1999/xhtml" items="1"></mutation>
   <field name="CONDITION">ne</field>
   <field name="ACK_CONDITION"></field>
   <value name="OID0">
     <shadow type="field_oid" id="[MlNQNzJOYHV_G/sW_9V">
       <field name="oid">default</field>
     </shadow>
   </value>
   <statement name="STATEMENT">
     <block type="controls_if" id="}jIUn/,`CitVWam5*!{j">
       <mutation else="1"></mutation>
       <value name="IF0">
         <block type="on_source" id="~+^c(d)9Pp};9=d;k^(~">
           <field name="ATTR">state.val</field>
         </block>
       </value>
       <statement name="DO0">
         <block type="variables_set" id="2ceJWHTViZpB}Lg8$xoB">
           <field name="VAR" id="]QNA]6mC/m=YN4#MWOV;">AT</field>
           <value name="VALUE">
             <block type="get_value" id="OZyemU2M,pG#4M6.fCBz">
               <field name="ATTR">val</field>
               <field name="OID">0_userdata.0.Aussen.Klima.Temperatur</field>
             </block>
           </value>
           <next>
             <block type="controls_if" id="c5xSBiVLfyVzB?#LjsPQ">
               <value name="IF0">
                 <block type="logic_compare" id="~+bKEi6D]y8w@}_#rwy^">
                   <field name="OP">LTE</field>
                   <value name="A">
                     <block type="variables_get" id="EaYhjM/*5p*VaDcauJg$">
                       <field name="VAR" id="]QNA]6mC/m=YN4#MWOV;">AT</field>
                     </block>
                   </value>
                   <value name="B">
                     <block type="math_number" id="SRy%F+0y6.w=-E*rvM/v">
                       <field name="NUM">15</field>
                     </block>
                   </value>
                 </block>
               </value>
               <statement name="DO0">
                 <block type="controls_if" id="52|^M-0g=Z32yAPO8UG]">
                   <mutation elseif="2" else="1"></mutation>
                   <value name="IF0">
                     <block type="logic_compare" id="6lOVHGxA9RaGAwK]$0KW">
                       <field name="OP">LTE</field>
                       <value name="A">
                         <block type="variables_get" id="hLfiQMq3*/1oM3C(NbhB">
                           <field name="VAR" id="]QNA]6mC/m=YN4#MWOV;">AT</field>
                         </block>
                       </value>
                       <value name="B">
                         <block type="math_number" id="okdf/i^obCKMb^V@0NCo">
                           <field name="NUM">5</field>
                         </block>
                       </value>
                     </block>
                   </value>
                   <statement name="DO0">
                     <block type="variables_set" id="Gw|KFup}:lxb+s=Cw,@a">
                       <field name="VAR" id="4RnZsx32p9:0WHh7`},t">delay</field>
                       <value name="VALUE">
                         <block type="math_number" id="_B7IBLbz`j9IO|sRYKFB">
                           <field name="NUM">180000</field>
                         </block>
                       </value>
                       <next>
                         <block type="variables_set" id="7`b,{0M:mg[rnT1?ppqb">
                           <field name="VAR" id="!$%d@O83Ka[rhkXU1dP%">repeat</field>
                           <value name="VALUE">
                             <block type="math_number" id="O4_{|}/yrW@,|hcV+21:">
                               <field name="NUM">60000</field>
                             </block>
                           </value>
                         </block>
                       </next>
                     </block>
                   </statement>
                   <value name="IF1">
                     <block type="logic_compare" id="DgHn#PWEHLvox7[{^vC/">
                       <field name="OP">LTE</field>
                       <value name="A">
                         <block type="variables_get" id="UMGtz$8FdLn$UI.16[x~">
                           <field name="VAR" id="]QNA]6mC/m=YN4#MWOV;">AT</field>
                         </block>
                       </value>
                       <value name="B">
                         <block type="math_number" id="_Lr^dK)2G$G6:5kDZr$i">
                           <field name="NUM">10</field>
                         </block>
                       </value>
                     </block>
                   </value>
                   <statement name="DO1">
                     <block type="variables_set" id="j;#V?VF`YpCQ1Vb:)lRh">
                       <field name="VAR" id="4RnZsx32p9:0WHh7`},t">delay</field>
                       <value name="VALUE">
                         <block type="math_number" id="Ps!:-r=^6O!3S[5HNB7B">
                           <field name="NUM">240000</field>
                         </block>
                       </value>
                       <next>
                         <block type="controls_if" id="7(`:L+{N]{].;E+P.,@S">
                           <mutation else="1"></mutation>
                           <value name="IF0">
                             <block type="logic_operation" id=":?@RSP_6Q.SYS+ZqJJh%" inline="false">
                               <field name="OP">OR</field>
                               <value name="A">
                                 <block type="logic_compare" id="Q5=s:p4=)8?2*:*#d0.y">
                                   <field name="OP">LT</field>
                                   <value name="A">
                                     <block type="time_get" id="@7tjj^UH(#}i9Y5EY9ng">
                                       <mutation xmlns="http://www.w3.org/1999/xhtml" format="false" language="false"></mutation>
                                       <field name="OPTION">MM/DD</field>
                                     </block>
                                   </value>
                                   <value name="B">
                                     <block type="text" id="I%^*a//jYR.p7V=zUzUX">
                                       <field name="TEXT">05/15</field>
                                     </block>
                                   </value>
                                 </block>
                               </value>
                               <value name="B">
                                 <block type="logic_compare" id="C(?5-W9G@!g@M/x%lxp;">
                                   <field name="OP">GT</field>
                                   <value name="A">
                                     <block type="time_get" id="7[vKmoB[@NtR3JxRd]Xl">
                                       <mutation xmlns="http://www.w3.org/1999/xhtml" format="false" language="false"></mutation>
                                       <field name="OPTION">MM/DD</field>
                                     </block>
                                   </value>
                                   <value name="B">
                                     <block type="text" id="aI_R$L%#vAU+U_)+H|)W">
                                       <field name="TEXT">09/15</field>
                                     </block>
                                   </value>
                                 </block>
                               </value>
                             </block>
                           </value>
                           <statement name="DO0">
                             <block type="variables_set" id="|.)G53.BF3{J#.^{a9(k">
                               <field name="VAR" id="!$%d@O83Ka[rhkXU1dP%">repeat</field>
                               <value name="VALUE">
                                 <block type="math_number" id="ibH)+0UQz;q9s;`C}lb3">
                                   <field name="NUM">60000</field>
                                 </block>
                               </value>
                             </block>
                           </statement>
                           <statement name="ELSE">
                             <block type="variables_set" id="[hQM8-;0{iiSL6a:-fy(">
                               <field name="VAR" id="!$%d@O83Ka[rhkXU1dP%">repeat</field>
                               <value name="VALUE">
                                 <block type="math_number" id="@At+{TPJ,(xKssf|n?IV">
                                   <field name="NUM">120000</field>
                                 </block>
                               </value>
                             </block>
                           </statement>
                         </block>
                       </next>
                     </block>
                   </statement>
                   <value name="IF2">
                     <block type="logic_operation" id="K;uBksX-9W)(!zT=DPiY" inline="false">
                       <field name="OP">AND</field>
                       <value name="A">
                         <block type="logic_compare" id="2):ua8WrKEeCt%w}MAm[">
                           <field name="OP">GTE</field>
                           <value name="A">
                             <block type="time_get" id="ST6$IL$C*cxKugv*n^iE">
                               <mutation xmlns="http://www.w3.org/1999/xhtml" format="false" language="false"></mutation>
                               <field name="OPTION">MM/DD</field>
                             </block>
                           </value>
                           <value name="B">
                             <block type="text" id="_3$0pj0VX$}tTp3Xp=~V">
                               <field name="TEXT">05/15</field>
                             </block>
                           </value>
                         </block>
                       </value>
                       <value name="B">
                         <block type="logic_compare" id="VV+!c;L6^mAcli#6f8E9">
                           <field name="OP">LTE</field>
                           <value name="A">
                             <block type="time_get" id="98v/1N.z,S},713lB#-T">
                               <mutation xmlns="http://www.w3.org/1999/xhtml" format="false" language="false"></mutation>
                               <field name="OPTION">MM/DD</field>
                             </block>
                           </value>
                           <value name="B">
                             <block type="text" id="{VbSpg9UMWQ-%@dAcG3`">
                               <field name="TEXT">09/15</field>
                             </block>
                           </value>
                         </block>
                       </value>
                     </block>
                   </value>
                   <statement name="DO2">
                     <block type="variables_set" id="$fj59$g5mU*jvefM=~;J">
                       <field name="VAR" id="4RnZsx32p9:0WHh7`},t">delay</field>
                       <value name="VALUE">
                         <block type="math_number" id="8mpUp26-WiPV*b0*aR!$">
                           <field name="NUM">420000</field>
                         </block>
                       </value>
                       <next>
                         <block type="variables_set" id="yfNt0[oDzsM~gy3pMAN5">
                           <field name="VAR" id="!$%d@O83Ka[rhkXU1dP%">repeat</field>
                           <value name="VALUE">
                             <block type="math_number" id="b2!_?f}l2#jM78L%+,Ff">
                               <field name="NUM">120000</field>
                             </block>
                           </value>
                         </block>
                       </next>
                     </block>
                   </statement>
                   <statement name="ELSE">
                     <block type="variables_set" id="M^sgq0.rPEYJ:8!_Ia9^">
                       <field name="VAR" id="4RnZsx32p9:0WHh7`},t">delay</field>
                       <value name="VALUE">
                         <block type="math_number" id="Mxi[:X|2aeD91).yYPP=">
                           <field name="NUM">300000</field>
                         </block>
                       </value>
                       <next>
                         <block type="variables_set" id="v@Osj]RCiX_N7wj*(^O$">
                           <field name="VAR" id="!$%d@O83Ka[rhkXU1dP%">repeat</field>
                           <value name="VALUE">
                             <block type="math_number" id="-?*Onrmxf?^XT@sH-jWd">
                               <field name="NUM">120000</field>
                             </block>
                           </value>
                         </block>
                       </next>
                     </block>
                   </statement>
                   <next>
                     <block type="variables_set" id="l]+}}cza!:;?O8*cuXZF">
                       <field name="VAR" id="zL[s}0F!ZKt(|[4;3urB">erinnern</field>
                       <value name="VALUE">
                         <block type="math_round" id="RZJdjb-`N4.^Mh6]/{Uf">
                           <field name="OP">ROUND</field>
                           <value name="NUM">
                             <shadow type="math_number" id=";UPHSL?Orhu^Kc,|n2b~">
                               <field name="NUM">3.1</field>
                             </shadow>
                             <block type="math_arithmetic" id="NWuTZur)MNxjn)~_9/}L">
                               <field name="OP">DIVIDE</field>
                               <value name="A">
                                 <shadow type="math_number" id="fKLma,i_EPR5fi/r2[/Y">
                                   <field name="NUM">1</field>
                                 </shadow>
                                 <block type="math_arithmetic" id="J58k|`S:;]al4q2P8RxG">
                                   <field name="OP">ADD</field>
                                   <value name="A">
                                     <shadow type="math_number" id="fPS,[8PfV0RIJfPiy,?n">
                                       <field name="NUM">1</field>
                                     </shadow>
                                     <block type="variables_get" id="F~phPOa`ia=(ziw:M^nC">
                                       <field name="VAR" id="4RnZsx32p9:0WHh7`},t">delay</field>
                                     </block>
                                   </value>
                                   <value name="B">
                                     <shadow type="math_number" id="a__g(Wn$8Pi$}OvlZxK+">
                                       <field name="NUM">1</field>
                                     </shadow>
                                     <block type="variables_get" id="*84MvqKAh-Qad:l@WS(X">
                                       <field name="VAR" id="!$%d@O83Ka[rhkXU1dP%">repeat</field>
                                     </block>
                                   </value>
                                 </block>
                               </value>
                               <value name="B">
                                 <shadow type="math_number" id="[JzwiX?%5-J895veMWB,">
                                   <field name="NUM">60000</field>
                                 </shadow>
                               </value>
                             </block>
                           </value>
                         </block>
                       </value>
                       <next>
                         <block type="control" id=".rCb{,2-p;zUV*ybaKm@">
                           <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation>
                           <field name="OID">Object ID</field>
                           <field name="WITH_DELAY">FALSE</field>
                           <value name="VALUE">
                             <block type="math_number" id="qr}?YyDWka?}ITSZPg_5">
                               <field name="NUM">100</field>
                             </block>
                           </value>
                           <next>
                             <block type="control" id="hOBpBB5X?nVIo1WOlS69">
                               <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="true"></mutation>
                               <field name="OID">Object ID</field>
                               <field name="WITH_DELAY">TRUE</field>
                               <field name="DELAY_MS">1</field>
                               <field name="UNIT">sec</field>
                               <field name="CLEAR_RUNNING">FALSE</field>
                               <value name="VALUE">
                                 <block type="text_join" id="W5UGwFSs|Z}94U2;G_W{">
                                   <mutation items="5"></mutation>
                                   <value name="ADD0">
                                     <block type="text" id="Aaz()#nr)(NTp+=G?YF|">
                                       <field name="TEXT">Es hat gerade </field>
                                     </block>
                                   </value>
                                   <value name="ADD1">
                                     <block type="variables_get" id="dfLE|1K#LVxI6M=]:QX{">
                                       <field name="VAR" id="]QNA]6mC/m=YN4#MWOV;">AT</field>
                                     </block>
                                   </value>
                                   <value name="ADD2">
                                     <block type="text" id="53aPK/=@M.a}W;1D%=hL">
                                       <field name="TEXT"> Grad Außentemperatur Erinnerung in </field>
                                     </block>
                                   </value>
                                   <value name="ADD3">
                                     <block type="variables_get" id="M]uv~p1KB)`@`;9$4DF[">
                                       <field name="VAR" id="zL[s}0F!ZKt(|[4;3urB">erinnern</field>
                                     </block>
                                   </value>
                                   <value name="ADD4">
                                     <block type="text" id="6yAI%}L8/H^[@[5z,``t">
                                       <field name="TEXT"> Minutem</field>
                                     </block>
                                   </value>
                                 </block>
                               </value>
                               <next>
                                 <block type="timeouts_settimeout" id="/=/=Tqkdv2di8u3:0=$C">
                                   <field name="NAME">timeout</field>
                                   <field name="DELAY">delay</field>
                                   <field name="UNIT">ms</field>
                                   <statement name="STATEMENT">
                                     <block type="timeouts_setinterval" id="}UNdg8kz$Mh:1w_Lo/V=">
                                       <field name="NAME">Intervall</field>
                                       <field name="INTERVAL">repeat</field>
                                       <field name="UNIT">ms</field>
                                       <statement name="STATEMENT">
                                         <block type="control" id="(.$AUzO6a?iL0yhke@@g">
                                           <mutation xmlns="http://www.w3.org/1999/xhtml" delay_input="false"></mutation>
                                           <field name="OID">Object ID</field>
                                           <field name="WITH_DELAY">FALSE</field>
                                           <value name="VALUE">
                                             <block type="text" id="ZZeLK=Ll)Q{}i,5Bj?_M">
                                               <field name="TEXT">Badfenster wieder schließen</field>
                                             </block>
                                           </value>
                                         </block>
                                       </statement>
                                     </block>
                                   </statement>
                                 </block>
                               </next>
                             </block>
                           </next>
                         </block>
                       </next>
                     </block>
                   </next>
                 </block>
               </statement>
             </block>
           </next>
         </block>
       </statement>
       <statement name="ELSE">
         <block type="timeouts_cleartimeout" id="4FBrkRD9H2hh@0;$oWub">
           <field name="NAME">timeout</field>
           <next>
             <block type="timeouts_clearinterval" id="y(K.(`/O@^Yn$4IHIVrq">
               <field name="NAME">Intervall</field>
             </block>
           </next>
         </block>
       </statement>
     </block>
   </statement>
 </block>
</xml>

[LaBamba]

@paul53
Das wahr anscheinend irgendwie nicht das Ganze.

var timeout, Intervall, timeout11, Intervall11, timeout12, Intervall12, timeout13, Intervall13, timeout14, Intervall14, timeout15, Intervall15, timeout16, Intervall16, timeout17, Intervall17, timeout18, Intervall18, timeout19, Intervall19, timeout20, Intervall20, timeout21, Intervall21, timeout22, Intervall22, timeout24, Intervall24;


// <=5
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 5) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 4 Minuten'].join('')), 1000, false);
    timeout = setTimeout(async function () {
      Intervall = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 60000);
    }, 180000);
  } else {
    (function () {if (timeout) {clearTimeout(timeout); timeout = null;}})();
    (function () {if (Intervall) {clearInterval(Intervall); Intervall = null;}})();
  }
});
// >5-<=10
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '09/15' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 5 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 10) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 6 Minuten'].join('')), 1000, false);
    timeout11 = setTimeout(async function () {
      Intervall11 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 240000);
  } else {
    (function () {if (timeout11) {clearTimeout(timeout11); timeout11 = null;}})();
    (function () {if (Intervall11) {clearInterval(Intervall11); Intervall11 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") < '05/15' && formatDate(new Date(), "MM/DD") > '09/15' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 5 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 10) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 5 Minuten'].join('')), 1000, false);
    timeout12 = setTimeout(async function () {
      Intervall12 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 60000);
    }, 240000);
  } else {
    (function () {if (timeout12) {clearTimeout(timeout12); timeout12 = null;}})();
    (function () {if (Intervall12) {clearInterval(Intervall12); Intervall12 = null;}})();
  }
});
// >10-<=15
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '15/09' && compareTime('00:00', '09:30', "between", null) && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 10 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 15) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 12 Minuten'].join('')), 1000, false);
    timeout13 = setTimeout(async function () {
      Intervall13 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 600000);
  } else {
    (function () {if (timeout13) {clearTimeout(timeout13); timeout13 = null;}})();
    (function () {if (Intervall13) {clearInterval(Intervall13); Intervall13 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '15/09' && compareTime('9:31', '23:59', "between", null) && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 10 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 15) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 9 Minuten'].join('')), 1000, false);
    timeout14 = setTimeout(async function () {
      Intervall14 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 420000);
  } else {
    (function () {if (timeout14) {clearTimeout(timeout14); timeout14 = null;}})();
    (function () {if (Intervall14) {clearInterval(Intervall14); Intervall14 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") < '05/15' && formatDate(new Date(), "MM/DD") > '15/09' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 10 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val <= 15) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 7 Minuten'].join('')), 1000, false);
    timeout15 = setTimeout(async function () {
      Intervall15 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 300000);
  } else {
    (function () {if (timeout15) {clearTimeout(timeout15); timeout15 = null;}})();
    (function () {if (Intervall15) {clearInterval(Intervall15); Intervall15 = null;}})();
  }
});
// >15-<=19
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '15/09' && compareTime('00:00', '09:30', "between", null) && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 15 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val < 19) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 18 Minuten'].join('')), 1000, false);
    timeout16 = setTimeout(async function () {
      Intervall16 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 180000);
    }, 900000);
  } else {
    (function () {if (timeout16) {clearTimeout(timeout16); timeout16 = null;}})();
    (function () {if (Intervall16) {clearInterval(Intervall16); Intervall16 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '15/09' && compareTime('09:31', '23:59', "between", null) && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 15 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val < 19) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 13 Minuten'].join('')), 1000, false);
    timeout17 = setTimeout(async function () {
      Intervall17 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 180000);
    }, 600000);
  } else {
    (function () {if (timeout17) {clearTimeout(timeout17); timeout17 = null;}})();
    (function () {if (Intervall17) {clearInterval(Intervall17); Intervall17 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") < '05/15' && formatDate(new Date(), "MM/DD") > '15/09' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val > 15 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val < 19) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 10 Minuten'].join('')), 1000, false);
    timeout18 = setTimeout(async function () {
      Intervall18 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 480000);
  } else {
    (function () {if (timeout18) {clearTimeout(timeout18); timeout18 = null;}})();
    (function () {if (Intervall18) {clearInterval(Intervall18); Intervall18 = null;}})();
  }
});
// >19
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '15/09' && compareTime('00:00', '09:30', "between", null) && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val >= 19 && getState("daswetter.0.NextHours.Location_1.Day_1.current.temp_value").val < getState("hm-rpc.0.000C98A9A4C756.1.ACTUAL_TEMPERATURE").val) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 16 Minuten'].join('')), 1000, false);
    timeout19 = setTimeout(async function () {
      Intervall19 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 240000);
    }, 720000);
  } else {
    (function () {if (timeout19) {clearTimeout(timeout19); timeout19 = null;}})();
    (function () {if (Intervall19) {clearInterval(Intervall19); Intervall19 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '15/09' && compareTime('09:31', '23:59', "between", null) && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val >= 19 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val < getState("hm-rpc.0.000C98A9A4C756.1.ACTUAL_TEMPERATURE").val) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 10 Minuten'].join('')), 1000, false);
    timeout20 = setTimeout(async function () {
      Intervall20 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 480000);
  } else {
    (function () {if (timeout20) {clearTimeout(timeout20); timeout20 = null;}})();
    (function () {if (Intervall20) {clearInterval(Intervall20); Intervall20 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") < '05/15' && formatDate(new Date(), "MM/DD") > '09/15' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val >= 19 && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val < getState("hm-rpc.0.000C98A9A4C756.1.ACTUAL_TEMPERATURE").val) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Erinnerung nach 10 Minuten'].join('')), 1000, false);
    timeout21 = setTimeout(async function () {
      Intervall21 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 480000);
  } else {
    (function () {if (timeout21) {clearTimeout(timeout21); timeout21 = null;}})();
    (function () {if (Intervall21) {clearInterval(Intervall21); Intervall21 = null;}})();
  }
});
// >Innenraumtemperatur
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") >= '05/15' && formatDate(new Date(), "MM/DD") <= '09/15' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val >= getState("hm-rpc.0.000C98A9A4C756.1.ACTUAL_TEMPERATURE").val) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Vorsicht, die Außentemperatur ist höher als die Innentemperatur','Erinnerung nach 6 Minuten'].join('')), 1000, false);
    timeout22 = setTimeout(async function () {
      Intervall22 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 240000);
  } else {
    (function () {if (timeout22) {clearTimeout(timeout22); timeout22 = null;}})();
    (function () {if (Intervall22) {clearInterval(Intervall22); Intervall22 = null;}})();
  }
});
on({id: "zigbee.0.00158d0003a4845d.opened"/*Badfenster ist geöffnet!*/, change: "ne"}, async function (obj) {
  var value = obj.state.val;
  var oldValue = obj.oldState.val;
  if (getState("zigbee.0.00158d0003a4845d.opened").val == true && formatDate(new Date(), "MM/DD") < '05/15' && formatDate(new Date(), "MM/DD") > '09/15' && getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val >= getState("hm-rpc.0.000C98A9A4C756.1.ACTUAL_TEMPERATURE").val) {
    setState("shelly.0.SHSW-25#687E4F#1.Shutter.Position"/*Position*/, 100);
    setStateDelayed("alexa2.0.Echo-Devices.G090P308817300CQ.Commands.announcement"/*announcement*/, (['Es hat gerade',getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val,'Grad Außentemperatur','Vorsicht, die Außentemperatur ist höher als die Innentemperatur','Erinnerung nach 8 Minuten'].join('')), 1000, false);
    timeout24 = setTimeout(async function () {
      Intervall24 = setInterval(async function () {
        setState("alexa2.0.Echo-Devices.G2A1A6031035033H.Commands.announcement"/*announcement*/, ('Bitte das Badfenster wieder schließen'));
      }, 120000);
    }, 360000);
  } else {
    (function () {if (timeout24) {clearTimeout(timeout24); timeout24 = null;}})();
    (function () {if (Intervall24) {clearInterval(Intervall24); Intervall24 = null;}})();
  }
});

getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val;

getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val;

getState("viessmannapi.0.1288346.0.features.heating.sensors.temperature.outside.properties.value.value").val;

[paul53]

@labamba sagte: Das wahr anscheinend irgendwie nicht das Ganze.

Das Blockly um die Raumtemperatur zu erweitern, schaffst Du selbst?

[LaBamba]

@paul53
Probiere es mal, so fit bin ich da auch nicht.
Die Variablen für die Uhrzeit bei höheren Temperaturen sind da schon schwieriger.

Zudem glaube ich, dass der Übergang des Datums aktuelle Zeit <05/15 und >09/15 nicht funktioniert. Hat in meinem Skript schon nicht geklappt.

[paul53]

@labamba sagte: Übergang des Datums aktuelle Zeit <05/15 und >09/15 nicht funktioniert. Hat in meinem Skript schon nicht geklappt.

Du hast es auch per UND verknüpft, ich per ODER.

[LaBamba]

@paul53

Ahhh der kleine feine Unterschied.
Ich habe es mir angeschaut und bin leicht überfordert.

[paul53]

@labamba sagte: bin leicht überfordert.

Lass Dir Zeit.

EDIT: Man kann es noch etwas vereinfachen, wenn man die Variable repeat auf den meist verwendeten Wert (2 Minuten) setzt und anschließend nur die Abweichungen behandelt.

[paul53]

@labamba
Tipp: Speichere die Sachen, die mehrmals abgefragt werden, zum Anfang in Variablen. Dann wird es wesentlich übersichtlicher und schont Ressourcen.

Winter:

Die Bereiche der Außentemperatur deckt man so ab: