[gelöst] Alexa Adapter startet nach Update auf 3.10.4 nicht
-
@apollon77 Also, soweit ich das zeitlich eingrenzen kann, ist es so, das der Fehler kommt, wenn SIGBUS kommt.
ioBroker Log:
host.ioBroker 2021-10-11 15:48:30.685 warn instance system.adapter.alexa2.0 terminated due to SIGBUSdmesg:
[Mo Okt 11 15:48:30 2021] Alignment trap: not handling instruction f4430add at [<b6374b40>] [Mo Okt 11 15:48:30 2021] 8<--- cut here --- [Mo Okt 11 15:48:30 2021] Unhandled fault: alignment exception (0xa21) at 0x054f564e [Mo Okt 11 15:48:30 2021] pgd = 2d9e975c [Mo Okt 11 15:48:30 2021] [054f564e] *pgd=0d470003, *pmd=b6e17003 -
Und wenn influxdb aus ist passiert das auch? Und: Wie groß ist deine influxdb denn so?
-
-
pi@ioBroker:~ $ sudo du -sh /var/lib/influxdb/data/iobroker 43M /var/lib/influxdb/data/iobrokerIst noch etwas entfernt, oder?
-
@skb Naja ok ... aber tu uns mal den gefallen und lass uns die influxdb bitte ausschliessen. also mal kurz aus (der influxdb adapter cached die daten, alles ok).
-
@thomas-braun said in Alexa Adapter startet nach Update auf 3.10.4 nicht mehr:
apt policy influxdb
pi@ioBroker:~ $ apt policy influxdb influxdb: Installiert: 1.6.4-1+deb10u1 Installationskandidat: 1.6.4-1+deb10u1 Versionstabelle: *** 1.6.4-1+deb10u1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages 100 /var/lib/dpkg/status@thomas-braun said in Alexa Adapter startet nach Update auf 3.10.4 nicht mehr:
@skb
Übertaktet ist der Pi aber nicht, oder?
Netzteil stabil?Gib mal die komplette Ausgabe von
free -ht dmesg -Tpi@ioBroker:~ $ free -ht total used free shared buff/cache available Mem: 3,7Gi 1,4Gi 933Mi 16Mi 1,4Gi 2,4Gi Swap: 99Mi 0B 99Mi Total: 3,8Gi 1,4Gi 1,0Gidmesg:
pi@ioBroker:~ $ dmesg -T [Mo Okt 11 12:51:32 2021] Booting Linux on physical CPU 0x0 [Mo Okt 11 12:51:32 2021] Linux version 5.10.63-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1457 SMP Tue Sep 28 11:26:14 BST 2021 [Mo Okt 11 12:51:32 2021] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [Mo Okt 11 12:51:32 2021] CPU: div instructions available: patching division code [Mo Okt 11 12:51:32 2021] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [Mo Okt 11 12:51:32 2021] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.2 [Mo Okt 11 12:51:32 2021] random: fast init done [Mo Okt 11 12:51:32 2021] Memory policy: Data cache writealloc [Mo Okt 11 12:51:32 2021] Reserved memory: created CMA memory pool at 0x000000001ac00000, size 320 MiB [Mo Okt 11 12:51:32 2021] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [Mo Okt 11 12:51:32 2021] Zone ranges: [Mo Okt 11 12:51:32 2021] DMA [mem 0x0000000000000000-0x000000002fffffff] [Mo Okt 11 12:51:32 2021] Normal empty [Mo Okt 11 12:51:32 2021] HighMem [mem 0x0000000030000000-0x00000000fbffffff] [Mo Okt 11 12:51:32 2021] Movable zone start for each node [Mo Okt 11 12:51:32 2021] Early memory node ranges [Mo Okt 11 12:51:32 2021] node 0: [mem 0x0000000000000000-0x000000003b3fffff] [Mo Okt 11 12:51:32 2021] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [Mo Okt 11 12:51:32 2021] Initmem setup node 0 [mem 0x0000000000000000-0x00000000fbffffff] [Mo Okt 11 12:51:32 2021] On node 0 totalpages: 1012736 [Mo Okt 11 12:51:32 2021] DMA zone: 1728 pages used for memmap [Mo Okt 11 12:51:32 2021] DMA zone: 0 pages reserved [Mo Okt 11 12:51:32 2021] DMA zone: 196608 pages, LIFO batch:63 [Mo Okt 11 12:51:32 2021] HighMem zone: 816128 pages, LIFO batch:63 [Mo Okt 11 12:51:32 2021] percpu: Embedded 20 pages/cpu s50828 r8192 d22900 u81920 [Mo Okt 11 12:51:32 2021] pcpu-alloc: s50828 r8192 d22900 u81920 alloc=20*4096 [Mo Okt 11 12:51:32 2021] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [Mo Okt 11 12:51:32 2021] Built 1 zonelists, mobility grouping on. Total pages: 1011008 [Mo Okt 11 12:51:32 2021] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 smsc95xx.macaddr=DC:A6:32:66:AE:1E vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 console=ttyAMA0,115200 root=PARTUUID=0c449fd1-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [Mo Okt 11 12:51:32 2021] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [Mo Okt 11 12:51:32 2021] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [Mo Okt 11 12:51:32 2021] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [Mo Okt 11 12:51:32 2021] mem auto-init: stack:off, heap alloc:off, heap free:off [Mo Okt 11 12:51:32 2021] software IO TLB: mapped [mem 0x0000000014890000-0x0000000018890000] (64MB) [Mo Okt 11 12:51:32 2021] Memory: 3601132K/4050944K available (10240K kernel code, 1364K rwdata, 3192K rodata, 2048K init, 891K bss, 122132K reserved, 327680K cma-reserved, 3264512K highmem) [Mo Okt 11 12:51:32 2021] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [Mo Okt 11 12:51:32 2021] ftrace: allocating 34317 entries in 68 pages [Mo Okt 11 12:51:32 2021] ftrace: allocated 68 pages with 2 groups [Mo Okt 11 12:51:32 2021] rcu: Hierarchical RCU implementation. [Mo Okt 11 12:51:32 2021] Rude variant of Tasks RCU enabled. [Mo Okt 11 12:51:32 2021] Tracing variant of Tasks RCU enabled. [Mo Okt 11 12:51:32 2021] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [Mo Okt 11 12:51:32 2021] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [Mo Okt 11 12:51:32 2021] GIC: Using split EOI/Deactivate mode [Mo Okt 11 12:51:32 2021] random: get_random_bytes called from start_kernel+0x3c8/0x59c with crng_init=1 [Mo Okt 11 12:51:32 2021] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [Mo Okt 11 12:51:32 2021] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [Mo Okt 11 12:51:32 2021] bcm2835: system timer (irq = 25) [Mo Okt 11 12:51:32 2021] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [Mo Okt 11 12:51:32 2021] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [Mo Okt 11 12:51:32 2021] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns [Mo Okt 11 12:51:32 2021] Switching to timer-based delay loop, resolution 18ns [Mo Okt 11 12:51:32 2021] Console: colour dummy device 80x30 [Mo Okt 11 12:51:32 2021] printk: console [tty1] enabled [Mo Okt 11 12:51:32 2021] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=540000) [Mo Okt 11 12:51:32 2021] pid_max: default: 32768 minimum: 301 [Mo Okt 11 12:51:32 2021] LSM: Security Framework initializing [Mo Okt 11 12:51:32 2021] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Mo Okt 11 12:51:32 2021] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [Mo Okt 11 12:51:32 2021] cgroup: Disabling memory control group subsystem [Mo Okt 11 12:51:32 2021] CPU: Testing write buffer coherency: ok [Mo Okt 11 12:51:32 2021] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [Mo Okt 11 12:51:32 2021] Setting up static identity map for 0x200000 - 0x20003c [Mo Okt 11 12:51:32 2021] rcu: Hierarchical SRCU implementation. [Mo Okt 11 12:51:32 2021] smp: Bringing up secondary CPUs ... [Mo Okt 11 12:51:32 2021] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [Mo Okt 11 12:51:32 2021] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [Mo Okt 11 12:51:32 2021] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [Mo Okt 11 12:51:32 2021] smp: Brought up 1 node, 4 CPUs [Mo Okt 11 12:51:32 2021] SMP: Total of 4 processors activated (432.00 BogoMIPS). [Mo Okt 11 12:51:32 2021] CPU: All CPU(s) started in HYP mode. [Mo Okt 11 12:51:32 2021] CPU: Virtualization extensions available. [Mo Okt 11 12:51:32 2021] devtmpfs: initialized [Mo Okt 11 12:51:32 2021] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [Mo Okt 11 12:51:32 2021] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [Mo Okt 11 12:51:32 2021] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [Mo Okt 11 12:51:32 2021] pinctrl core: initialized pinctrl subsystem [Mo Okt 11 12:51:32 2021] NET: Registered protocol family 16 [Mo Okt 11 12:51:32 2021] DMA: preallocated 1024 KiB pool for atomic coherent allocations [Mo Okt 11 12:51:32 2021] audit: initializing netlink subsys (disabled) [Mo Okt 11 12:51:32 2021] audit: type=2000 audit(0.010:1): state=initialized audit_enabled=0 res=1 [Mo Okt 11 12:51:32 2021] thermal_sys: Registered thermal governor 'step_wise' [Mo Okt 11 12:51:32 2021] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [Mo Okt 11 12:51:32 2021] hw-breakpoint: maximum watchpoint size is 8 bytes. [Mo Okt 11 12:51:32 2021] Serial: AMBA PL011 UART driver [Mo Okt 11 12:51:32 2021] bcm2835-mbox fe00b880.mailbox: mailbox enabled [Mo Okt 11 12:51:32 2021] raspberrypi-firmware soc:firmware: Attached to firmware from 2021-09-28T11:27:35, variant start [Mo Okt 11 12:51:32 2021] raspberrypi-firmware soc:firmware: Firmware hash is 778b6a4f3c7d8d48bb63c02c47bcfbac79417bea [Mo Okt 11 12:51:32 2021] Kprobes globally optimized [Mo Okt 11 12:51:32 2021] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [Mo Okt 11 12:51:32 2021] vgaarb: loaded [Mo Okt 11 12:51:32 2021] SCSI subsystem initialized [Mo Okt 11 12:51:32 2021] usbcore: registered new interface driver usbfs [Mo Okt 11 12:51:32 2021] usbcore: registered new interface driver hub [Mo Okt 11 12:51:32 2021] usbcore: registered new device driver usb [Mo Okt 11 12:51:32 2021] usb_phy_generic phy: supply vcc not found, using dummy regulator [Mo Okt 11 12:51:32 2021] clocksource: Switched to clocksource arch_sys_counter [Mo Okt 11 12:51:32 2021] VFS: Disk quotas dquot_6.6.0 [Mo Okt 11 12:51:32 2021] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [Mo Okt 11 12:51:32 2021] FS-Cache: Loaded [Mo Okt 11 12:51:32 2021] CacheFiles: Loaded [Mo Okt 11 12:51:32 2021] NET: Registered protocol family 2 [Mo Okt 11 12:51:32 2021] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [Mo Okt 11 12:51:32 2021] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [Mo Okt 11 12:51:32 2021] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [Mo Okt 11 12:51:32 2021] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [Mo Okt 11 12:51:32 2021] TCP: Hash tables configured (established 8192 bind 8192) [Mo Okt 11 12:51:32 2021] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [Mo Okt 11 12:51:32 2021] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [Mo Okt 11 12:51:32 2021] NET: Registered protocol family 1 [Mo Okt 11 12:51:32 2021] RPC: Registered named UNIX socket transport module. [Mo Okt 11 12:51:32 2021] RPC: Registered udp transport module. [Mo Okt 11 12:51:32 2021] RPC: Registered tcp transport module. [Mo Okt 11 12:51:32 2021] RPC: Registered tcp NFSv4.1 backchannel transport module. [Mo Okt 11 12:51:32 2021] PCI: CLS 0 bytes, default 64 [Mo Okt 11 12:51:32 2021] Initialise system trusted keyrings [Mo Okt 11 12:51:32 2021] workingset: timestamp_bits=14 max_order=20 bucket_order=6 [Mo Okt 11 12:51:32 2021] zbud: loaded [Mo Okt 11 12:51:32 2021] FS-Cache: Netfs 'nfs' registered for caching [Mo Okt 11 12:51:32 2021] NFS: Registering the id_resolver key type [Mo Okt 11 12:51:32 2021] Key type id_resolver registered [Mo Okt 11 12:51:32 2021] Key type id_legacy registered [Mo Okt 11 12:51:32 2021] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [Mo Okt 11 12:51:32 2021] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [Mo Okt 11 12:51:32 2021] Key type asymmetric registered [Mo Okt 11 12:51:32 2021] Asymmetric key parser 'x509' registered [Mo Okt 11 12:51:32 2021] bounce: pool size: 64 pages [Mo Okt 11 12:51:32 2021] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249) [Mo Okt 11 12:51:32 2021] io scheduler mq-deadline registered [Mo Okt 11 12:51:32 2021] io scheduler kyber registered [Mo Okt 11 12:51:32 2021] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [Mo Okt 11 12:51:32 2021] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff] [Mo Okt 11 12:51:32 2021] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000 [Mo Okt 11 12:51:32 2021] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0x0400000000 [Mo Okt 11 12:51:32 2021] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [Mo Okt 11 12:51:32 2021] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [Mo Okt 11 12:51:32 2021] pci_bus 0000:00: root bus resource [bus 00-ff] [Mo Okt 11 12:51:32 2021] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [Mo Okt 11 12:51:32 2021] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [Mo Okt 11 12:51:32 2021] pci 0000:00:00.0: PME# supported from D0 D3hot [Mo Okt 11 12:51:32 2021] PCI: bus0: Fast back to back transfers disabled [Mo Okt 11 12:51:32 2021] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [Mo Okt 11 12:51:32 2021] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [Mo Okt 11 12:51:32 2021] pci 0000:01:00.0: PME# supported from D0 D3cold [Mo Okt 11 12:51:32 2021] PCI: bus1: Fast back to back transfers disabled [Mo Okt 11 12:51:32 2021] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [Mo Okt 11 12:51:32 2021] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64bit] [Mo Okt 11 12:51:32 2021] pci 0000:00:00.0: PCI bridge to [bus 01] [Mo Okt 11 12:51:32 2021] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [Mo Okt 11 12:51:32 2021] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [Mo Okt 11 12:51:32 2021] pcieport 0000:00:00.0: PME: Signaling with IRQ 64 [Mo Okt 11 12:51:32 2021] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [Mo Okt 11 12:51:32 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Mo Okt 11 12:51:32 2021] iproc-rng200 fe104000.rng: hwrng registered [Mo Okt 11 12:51:32 2021] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [Mo Okt 11 12:51:32 2021] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000 [Mo Okt 11 12:51:32 2021] brd: module loaded [Mo Okt 11 12:51:32 2021] loop: module loaded [Mo Okt 11 12:51:32 2021] Loading iSCSI transport class v2.0-870. [Mo Okt 11 12:51:32 2021] libphy: Fixed MDIO Bus: probed [Mo Okt 11 12:51:32 2021] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [Mo Okt 11 12:51:32 2021] libphy: bcmgenet MII bus: probed [Mo Okt 11 12:51:32 2021] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [Mo Okt 11 12:51:32 2021] usbcore: registered new interface driver r8152 [Mo Okt 11 12:51:32 2021] usbcore: registered new interface driver lan78xx [Mo Okt 11 12:51:32 2021] usbcore: registered new interface driver smsc95xx [Mo Okt 11 12:51:32 2021] xhci_hcd 0000:01:00.0: enabling device (0140 -> 0142) [Mo Okt 11 12:51:32 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Mo Okt 11 12:51:32 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 1 [Mo Okt 11 12:51:32 2021] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000060000000890 [Mo Okt 11 12:51:32 2021] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.10 [Mo Okt 11 12:51:32 2021] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Mo Okt 11 12:51:32 2021] usb usb1: Product: xHCI Host Controller [Mo Okt 11 12:51:32 2021] usb usb1: Manufacturer: Linux 5.10.63-v7l+ xhci-hcd [Mo Okt 11 12:51:32 2021] usb usb1: SerialNumber: 0000:01:00.0 [Mo Okt 11 12:51:32 2021] hub 1-0:1.0: USB hub found [Mo Okt 11 12:51:32 2021] hub 1-0:1.0: 1 port detected [Mo Okt 11 12:51:32 2021] xhci_hcd 0000:01:00.0: xHCI Host Controller [Mo Okt 11 12:51:32 2021] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus number 2 [Mo Okt 11 12:51:32 2021] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [Mo Okt 11 12:51:32 2021] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.10 [Mo Okt 11 12:51:32 2021] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [Mo Okt 11 12:51:32 2021] usb usb2: Product: xHCI Host Controller [Mo Okt 11 12:51:32 2021] usb usb2: Manufacturer: Linux 5.10.63-v7l+ xhci-hcd [Mo Okt 11 12:51:32 2021] usb usb2: SerialNumber: 0000:01:00.0 [Mo Okt 11 12:51:32 2021] hub 2-0:1.0: USB hub found [Mo Okt 11 12:51:32 2021] hub 2-0:1.0: 4 ports detected [Mo Okt 11 12:51:32 2021] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [Mo Okt 11 12:51:32 2021] dwc_otg: FIQ enabled [Mo Okt 11 12:51:32 2021] dwc_otg: NAK holdoff enabled [Mo Okt 11 12:51:32 2021] dwc_otg: FIQ split-transaction FSM enabled [Mo Okt 11 12:51:32 2021] Module dwc_common_port init [Mo Okt 11 12:51:32 2021] usbcore: registered new interface driver uas [Mo Okt 11 12:51:32 2021] usbcore: registered new interface driver usb-storage [Mo Okt 11 12:51:32 2021] mousedev: PS/2 mouse device common for all mice [Mo Okt 11 12:51:32 2021] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [Mo Okt 11 12:51:32 2021] sdhci: Secure Digital Host Controller Interface driver [Mo Okt 11 12:51:32 2021] sdhci: Copyright(c) Pierre Ossman [Mo Okt 11 12:51:32 2021] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [Mo Okt 11 12:51:32 2021] sdhci-pltfm: SDHCI platform and OF driver helper [Mo Okt 11 12:51:32 2021] ledtrig-cpu: registered to indicate activity on CPUs [Mo Okt 11 12:51:32 2021] hid: raw HID events driver (C) Jiri Kosina [Mo Okt 11 12:51:32 2021] usbcore: registered new interface driver usbhid [Mo Okt 11 12:51:32 2021] usbhid: USB HID core driver [Mo Okt 11 12:51:32 2021] Initializing XFRM netlink socket [Mo Okt 11 12:51:32 2021] NET: Registered protocol family 17 [Mo Okt 11 12:51:32 2021] Key type dns_resolver registered [Mo Okt 11 12:51:32 2021] Registering SWP/SWPB emulation handler [Mo Okt 11 12:51:32 2021] registered taskstats version 1 [Mo Okt 11 12:51:32 2021] Loading compiled-in X.509 certificates [Mo Okt 11 12:51:32 2021] Key type ._fscrypt registered [Mo Okt 11 12:51:32 2021] Key type .fscrypt registered [Mo Okt 11 12:51:32 2021] Key type fscrypt-provisioning registered [Mo Okt 11 12:51:32 2021] bcm2835-aux-uart fe215040.serial: there is not valid maps for state default [Mo Okt 11 12:51:32 2021] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550 [Mo Okt 11 12:51:32 2021] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [Mo Okt 11 12:51:32 2021] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [Mo Okt 11 12:51:32 2021] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [Mo Okt 11 12:51:32 2021] of_cfs_init [Mo Okt 11 12:51:32 2021] of_cfs_init: OK [Mo Okt 11 12:51:32 2021] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [Mo Okt 11 12:51:32 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Mo Okt 11 12:51:32 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Mo Okt 11 12:51:32 2021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [Mo Okt 11 12:51:32 2021] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [Mo Okt 11 12:51:32 2021] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA [Mo Okt 11 12:51:32 2021] Waiting for root device PARTUUID=0c449fd1-02... [Mo Okt 11 12:51:32 2021] mmc1: new high speed SDIO card at address 0001 [Mo Okt 11 12:51:32 2021] mmc0: new ultra high speed DDR50 SDXC card at address 0001 [Mo Okt 11 12:51:32 2021] mmcblk0: mmc0:0001 EC2QT 59.6 GiB [Mo Okt 11 12:51:32 2021] mmcblk0: p1 p2 [Mo Okt 11 12:51:32 2021] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [Mo Okt 11 12:51:32 2021] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [Mo Okt 11 12:51:32 2021] devtmpfs: mounted [Mo Okt 11 12:51:32 2021] Freeing unused kernel memory: 2048K [Mo Okt 11 12:51:32 2021] Run /sbin/init as init process [Mo Okt 11 12:51:32 2021] with arguments: [Mo Okt 11 12:51:32 2021] /sbin/init [Mo Okt 11 12:51:32 2021] with environment: [Mo Okt 11 12:51:32 2021] HOME=/ [Mo Okt 11 12:51:32 2021] TERM=linux [Mo Okt 11 12:51:32 2021] usb 1-1: new high-speed USB device number 2 using xhci_hcd [Mo Okt 11 12:51:33 2021] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.21 [Mo Okt 11 12:51:33 2021] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [Mo Okt 11 12:51:33 2021] usb 1-1: Product: USB2.0 Hub [Mo Okt 11 12:51:33 2021] hub 1-1:1.0: USB hub found [Mo Okt 11 12:51:33 2021] hub 1-1:1.0: 4 ports detected [Mo Okt 11 12:51:33 2021] systemd[1]: System time before build time, advancing clock. [Mo Okt 11 12:51:33 2021] NET: Registered protocol family 10 [Mo Okt 11 12:51:33 2021] Segment Routing with IPv6 [Mo Okt 11 12:51:33 2021] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [Mo Okt 11 12:51:33 2021] systemd[1]: Detected architecture arm. [Mo Okt 11 12:51:33 2021] usb 1-1.4: new full-speed USB device number 3 using xhci_hcd [Mo Okt 11 12:51:33 2021] systemd[1]: Set hostname to <ioBroker>. [Mo Okt 11 12:51:33 2021] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [Mo Okt 11 12:51:33 2021] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Mo Okt 11 12:51:33 2021] usb 1-1.4: Product: ConBee II [Mo Okt 11 12:51:33 2021] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH [Mo Okt 11 12:51:33 2021] usb 1-1.4: SerialNumber: DE2427836 [Mo Okt 11 12:51:33 2021] systemd[1]: /lib/systemd/system/pivccu.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/pivccu3.pid → /run/pivccu3.pid; please update the unit file accordingly. [Mo Okt 11 12:51:33 2021] systemd[1]: /usr/lib/systemd/system/grafana-server.service:27: Unknown lvalue 'ProcSubset' in section 'Service', ignoring [Mo Okt 11 12:51:33 2021] systemd[1]: /usr/lib/systemd/system/grafana-server.service:28: Unknown lvalue 'ProtectClock' in section 'Service', ignoring [Mo Okt 11 12:51:33 2021] systemd[1]: /usr/lib/systemd/system/grafana-server.service:31: Unknown lvalue 'ProtectHostname' in section 'Service', ignoring [Mo Okt 11 12:51:33 2021] systemd[1]: /usr/lib/systemd/system/grafana-server.service:32: Unknown lvalue 'ProtectKernelLogs' in section 'Service', ignoring [Mo Okt 11 12:51:33 2021] systemd[1]: /usr/lib/systemd/system/grafana-server.service:35: Unknown lvalue 'ProtectProc' in section 'Service', ignoring [Mo Okt 11 12:51:33 2021] systemd[1]: /usr/lib/systemd/system/grafana-server.service:41: Unknown lvalue 'RestrictSUIDSGID' in section 'Service', ignoring [Mo Okt 11 12:51:33 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mo Okt 11 12:51:33 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mo Okt 11 12:51:33 2021] random: systemd: uninitialized urandom read (16 bytes read) [Mo Okt 11 12:51:34 2021] i2c /dev entries driver [Mo Okt 11 12:51:34 2021] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [Mo Okt 11 12:51:34 2021] systemd-journald[115]: Received request to flush runtime journal from PID 1 [Mo Okt 11 12:51:34 2021] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Registers at 0xfeb00000 length 0x00010000 [Mo Okt 11 12:51:34 2021] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised: Registers at 0xfeb10000 length 0x00001000 [Mo Okt 11 12:51:34 2021] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Registers at 0xfeb20000 length 0x00010000 [Mo Okt 11 12:51:34 2021] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Registers at 0xfeb30000 length 0x00010000 [Mo Okt 11 12:51:34 2021] mc: Linux media interface: v0.10 [Mo Okt 11 12:51:34 2021] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [Mo Okt 11 12:51:34 2021] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [Mo Okt 11 12:51:34 2021] [vc_sm_connected_init]: start [Mo Okt 11 12:51:34 2021] [vc_sm_connected_init]: installed successfully [Mo Okt 11 12:51:34 2021] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [Mo Okt 11 12:51:34 2021] bcm2835_audio bcm2835_audio: card created with 8 channels [Mo Okt 11 12:51:34 2021] videodev: Linux video capture interface: v2.00 [Mo Okt 11 12:51:34 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Mo Okt 11 12:51:34 2021] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [Mo Okt 11 12:51:34 2021] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [Mo Okt 11 12:51:34 2021] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [Mo Okt 11 12:51:34 2021] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [Mo Okt 11 12:51:34 2021] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [Mo Okt 11 12:51:34 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [Mo Okt 11 12:51:34 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [Mo Okt 11 12:51:34 2021] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [Mo Okt 11 12:51:34 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [Mo Okt 11 12:51:34 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [Mo Okt 11 12:51:34 2021] cfg80211: Loading compiled-in X.509 certificates for regulatory database [Mo Okt 11 12:51:34 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [Mo Okt 11 12:51:34 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [Mo Okt 11 12:51:34 2021] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [Mo Okt 11 12:51:34 2021] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [Mo Okt 11 12:51:34 2021] [drm] No displays found. Consider forcing hotplug if HDMI is attached [Mo Okt 11 12:51:34 2021] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [Mo Okt 11 12:51:34 2021] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [Mo Okt 11 12:51:34 2021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [Mo Okt 11 12:51:34 2021] brcmfmac: F1 signature read @0x18000000=0x15264345 [Mo Okt 11 12:51:34 2021] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device [Mo Okt 11 12:51:34 2021] usbcore: registered new interface driver cdc_acm [Mo Okt 11 12:51:34 2021] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [Mo Okt 11 12:51:34 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Mo Okt 11 12:51:34 2021] usbcore: registered new interface driver brcmfmac [Mo Okt 11 12:51:35 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Mo Okt 11 12:51:35 2021] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6 [Mo Okt 11 12:51:35 2021] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [Mo Okt 11 12:51:36 2021] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [Mo Okt 11 12:51:36 2021] br0: port 1(eth0) entered blocking state [Mo Okt 11 12:51:36 2021] br0: port 1(eth0) entered disabled state [Mo Okt 11 12:51:36 2021] device eth0 entered promiscuous mode [Mo Okt 11 12:51:36 2021] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay) [Mo Okt 11 12:51:36 2021] bcmgenet fd580000.ethernet eth0: Link is Down [Mo Okt 11 12:51:36 2021] random: crng init done [Mo Okt 11 12:51:36 2021] random: 7 urandom warning(s) missed due to ratelimiting [Mo Okt 11 12:51:36 2021] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS [Mo Okt 11 12:51:40 2021] bcmgenet fd580000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off [Mo Okt 11 12:51:40 2021] br0: port 1(eth0) entered blocking state [Mo Okt 11 12:51:40 2021] br0: port 1(eth0) entered forwarding state [Mo Okt 11 12:51:40 2021] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [Mo Okt 11 12:51:43 2021] Bluetooth: Core ver 2.22 [Mo Okt 11 12:51:43 2021] NET: Registered protocol family 31 [Mo Okt 11 12:51:43 2021] Bluetooth: HCI device and connection manager initialized [Mo Okt 11 12:51:43 2021] Bluetooth: HCI socket layer initialized [Mo Okt 11 12:51:43 2021] Bluetooth: L2CAP socket layer initialized [Mo Okt 11 12:51:43 2021] Bluetooth: SCO socket layer initialized [Mo Okt 11 12:51:43 2021] Bluetooth: HCI UART driver ver 2.3 [Mo Okt 11 12:51:43 2021] Bluetooth: HCI UART protocol H4 registered [Mo Okt 11 12:51:43 2021] Bluetooth: HCI UART protocol Three-wire (H5) registered [Mo Okt 11 12:51:43 2021] Bluetooth: HCI UART protocol Broadcom registered [Mo Okt 11 12:51:44 2021] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [Mo Okt 11 12:51:44 2021] Bluetooth: BNEP filters: protocol multicast [Mo Okt 11 12:51:44 2021] Bluetooth: BNEP socket layer initialized [Mo Okt 11 12:52:13 2021] generic_raw_uart: loading out-of-tree module taints kernel. [Mo Okt 11 12:52:13 2021] pl011_raw_uart fe201000.serial: there is not valid maps for state default [Mo Okt 11 12:52:13 2021] pl011_raw_uart fe201000.serial: Missing I2C driver of rtc device, trying to load [Mo Okt 11 12:52:13 2021] pl011_raw_uart fe201000.serial: Requesting module i2c:rx8130-legacy [Mo Okt 11 12:52:13 2021] rtc-rx8130 1-0032: Unable to read registers #28..#30 [Mo Okt 11 12:52:13 2021] i2c i2c-1: probing for rx8130 failed [Mo Okt 11 12:52:13 2021] rtc-rx8130: probe of 1-0032 failed with error -121 [Mo Okt 11 12:52:13 2021] rtc-rx8130 1-0032: Unable to read registers #28..#30 [Mo Okt 11 12:52:13 2021] i2c i2c-1: probing for rx8130 failed [Mo Okt 11 12:52:13 2021] rtc-rx8130: probe of 1-0032 failed with error -121 [Mo Okt 11 12:52:13 2021] pl011_raw_uart fe201000.serial: Initialized pl011 device; mapbase=0xfe201000; irq=36; clockrate=48000001 [Mo Okt 11 12:52:13 2021] raw-uart raw-uart: Reset radio module [Mo Okt 11 12:52:22 2021] br0: port 2(vethpivccu) entered blocking state [Mo Okt 11 12:52:22 2021] br0: port 2(vethpivccu) entered disabled state [Mo Okt 11 12:52:22 2021] device vethpivccu entered promiscuous mode [Mo Okt 11 12:52:22 2021] cgroup: cgroup: disabling cgroup2 socket matching due to net_prio or net_cls activation [Mo Okt 11 12:52:22 2021] eth0: renamed from veth53YIH1 [Mo Okt 11 12:52:22 2021] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [Mo Okt 11 12:52:22 2021] IPv6: ADDRCONF(NETDEV_CHANGE): vethpivccu: link becomes ready [Mo Okt 11 12:52:22 2021] br0: port 2(vethpivccu) entered blocking state [Mo Okt 11 12:52:22 2021] br0: port 2(vethpivccu) entered forwarding state [Mo Okt 11 12:52:37 2021] eq3loop: created slave mmd_hmip [Mo Okt 11 12:52:37 2021] eq3loop: created slave mmd_bidcos [Mo Okt 11 12:52:39 2021] eq3loop: eq3loop_open_slave() mmd_bidcos [Mo Okt 11 12:52:41 2021] FS-Cache: Netfs 'cifs' registered for caching [Mo Okt 11 12:52:41 2021] Key type cifs.spnego registered [Mo Okt 11 12:52:41 2021] Key type cifs.idmap registered [Mo Okt 11 12:52:41 2021] CIFS: Attempting to mount //192.168.2.60/SmartHome/ioBroker [Mo Okt 11 12:52:49 2021] eq3loop: eq3loop_open_slave() mmd_hmip [Mo Okt 11 12:52:49 2021] eq3loop: eq3loop_close_slave() mmd_hmip [Mo Okt 11 12:52:49 2021] eq3loop: eq3loop_open_slave() mmd_hmip [Mo Okt 11 12:52:49 2021] eq3loop: eq3loop_close_slave() mmd_hmip [Mo Okt 11 12:52:49 2021] eq3loop: eq3loop_open_slave() mmd_hmip [Mo Okt 11 12:52:49 2021] eq3loop: eq3loop_close_slave() mmd_hmip [Mo Okt 11 12:52:49 2021] eq3loop: eq3loop_open_slave() mmd_hmip [Mo Okt 11 12:53:18 2021] tun: Universal TUN/TAP device driver, 1.6 [Mo Okt 11 12:53:19 2021] usb 1-1.4: USB disconnect, device number 3 [Mo Okt 11 12:53:20 2021] usb 1-1.4: new full-speed USB device number 4 using xhci_hcd [Mo Okt 11 12:53:20 2021] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [Mo Okt 11 12:53:20 2021] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Mo Okt 11 12:53:20 2021] usb 1-1.4: Product: ConBee II [Mo Okt 11 12:53:20 2021] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH [Mo Okt 11 12:53:20 2021] usb 1-1.4: SerialNumber: DE2427836 [Mo Okt 11 12:53:20 2021] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device [Mo Okt 11 12:53:23 2021] usb 1-1.4: USB disconnect, device number 4 [Mo Okt 11 12:53:24 2021] usb 1-1.4: new full-speed USB device number 5 using xhci_hcd [Mo Okt 11 12:53:24 2021] usb 1-1.4: New USB device found, idVendor=1cf1, idProduct=0030, bcdDevice= 1.00 [Mo Okt 11 12:53:24 2021] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [Mo Okt 11 12:53:24 2021] usb 1-1.4: Product: ConBee II [Mo Okt 11 12:53:24 2021] usb 1-1.4: Manufacturer: dresden elektronik ingenieurtechnik GmbH [Mo Okt 11 12:53:24 2021] usb 1-1.4: SerialNumber: DE2427836 [Mo Okt 11 12:53:24 2021] cdc_acm 1-1.4:1.0: ttyACM0: USB ACM device [Mo Okt 11 13:03:25 2021] Alignment trap: not handling instruction f4430add at [<b42e9b40>] [Mo Okt 11 13:03:25 2021] 8<--- cut here --- [Mo Okt 11 13:03:25 2021] Unhandled fault: alignment exception (0xa21) at 0x042c7c96 [Mo Okt 11 13:03:25 2021] pgd = c2a2fdb4 [Mo Okt 11 13:03:25 2021] [042c7c96] *pgd=0b7e9003, *pmd=fbe6e003 [Mo Okt 11 13:04:01 2021] Alignment trap: not handling instruction f4430add at [<b636db40>] [Mo Okt 11 13:04:01 2021] 8<--- cut here --- [Mo Okt 11 13:04:01 2021] Unhandled fault: alignment exception (0xa21) at 0x04503cd6 [Mo Okt 11 13:04:01 2021] pgd = 61fb6e79 [Mo Okt 11 13:04:01 2021] [04503cd6] *pgd=0d46b003, *pmd=f86b3003 [Mo Okt 11 13:04:36 2021] Alignment trap: not handling instruction f4430add at [<b640ab40>] [Mo Okt 11 13:04:36 2021] 8<--- cut here --- [Mo Okt 11 13:04:36 2021] Unhandled fault: alignment exception (0xa21) at 0x05aa4466 [Mo Okt 11 13:04:36 2021] pgd = 6ae4652a [Mo Okt 11 13:04:36 2021] [05aa4466] *pgd=0d67f003, *pmd=f8575003 [Mo Okt 11 13:07:02 2021] Alignment trap: not handling instruction f4430add at [<b42e9b40>] [Mo Okt 11 13:07:02 2021] 8<--- cut here --- [Mo Okt 11 13:07:02 2021] Unhandled fault: alignment exception (0xa21) at 0x04396546 [Mo Okt 11 13:07:02 2021] pgd = 6348d82f [Mo Okt 11 13:07:02 2021] [04396546] *pgd=0b5dd003, *pmd=8e081003 [Mo Okt 11 13:07:37 2021] Alignment trap: not handling instruction f4430add at [<b639db40>] [Mo Okt 11 13:07:37 2021] 8<--- cut here --- [Mo Okt 11 13:07:37 2021] Unhandled fault: alignment exception (0xa21) at 0x0540489e [Mo Okt 11 13:07:37 2021] pgd = e4f86eac [Mo Okt 11 13:07:37 2021] [0540489e] *pgd=0190f003, *pmd=8e046003 [Mo Okt 11 15:19:00 2021] Alignment trap: not handling instruction f4430add at [<b63e0b40>] [Mo Okt 11 15:19:00 2021] 8<--- cut here --- [Mo Okt 11 15:19:00 2021] Unhandled fault: alignment exception (0xa21) at 0x049f33de [Mo Okt 11 15:19:00 2021] pgd = 8db46220 [Mo Okt 11 15:19:00 2021] [049f33de] *pgd=0e48a003, *pmd=9ea6f003 [Mo Okt 11 15:19:16 2021] Alignment trap: not handling instruction f4430add at [<b639eb40>] [Mo Okt 11 15:19:16 2021] 8<--- cut here --- [Mo Okt 11 15:19:16 2021] Unhandled fault: alignment exception (0xa21) at 0x03d1ca6e [Mo Okt 11 15:19:16 2021] pgd = 74c456c8 [Mo Okt 11 15:19:16 2021] [03d1ca6e] *pgd=0751a003, *pmd=9e9d3003 [Mo Okt 11 15:19:58 2021] Alignment trap: not handling instruction f4430add at [<b63dbb40>] [Mo Okt 11 15:19:58 2021] 8<--- cut here --- [Mo Okt 11 15:19:58 2021] Unhandled fault: alignment exception (0xa21) at 0x05490f56 [Mo Okt 11 15:19:58 2021] pgd = 0e07b0dc [Mo Okt 11 15:19:58 2021] [05490f56] *pgd=07422003, *pmd=f869d003 [Mo Okt 11 15:24:26 2021] Alignment trap: not handling instruction f4430add at [<b42e9b40>] [Mo Okt 11 15:24:26 2021] 8<--- cut here --- [Mo Okt 11 15:24:26 2021] Unhandled fault: alignment exception (0xa21) at 0x04cb6e7e [Mo Okt 11 15:24:26 2021] pgd = 982f978d [Mo Okt 11 15:24:26 2021] [04cb6e7e] *pgd=0d4cb003, *pmd=f8ce4003 [Mo Okt 11 15:27:04 2021] Alignment trap: not handling instruction f4430add at [<b635bb40>] [Mo Okt 11 15:27:04 2021] 8<--- cut here --- [Mo Okt 11 15:27:04 2021] Unhandled fault: alignment exception (0xa21) at 0x040e81de [Mo Okt 11 15:27:04 2021] pgd = 9f8645f1 [Mo Okt 11 15:27:04 2021] [040e81de] *pgd=0b7e2003, *pmd=9ebf6003 [Mo Okt 11 15:48:30 2021] Alignment trap: not handling instruction f4430add at [<b6374b40>] [Mo Okt 11 15:48:30 2021] 8<--- cut here --- [Mo Okt 11 15:48:30 2021] Unhandled fault: alignment exception (0xa21) at 0x054f564e [Mo Okt 11 15:48:30 2021] pgd = 2d9e975c [Mo Okt 11 15:48:30 2021] [054f564e] *pgd=0d470003, *pmd=b6e17003 -
@apollon77 Habe die influxdb gestoppt.
Dann den Adapter gestartet.
ioBroker Log:
host.ioBroker 2021-10-11 16:10:07.361 warn instance system.adapter.alexa2.0 terminated due to SIGBUS alexa2.0 2021-10-11 16:10:07.162 debug Alexa-Remote WS-MQTT: Open: wss://dp-gw-na.amazon.de/tcomm/ alexa2.0 2021-10-11 16:10:07.021 debug Alexa-Remote: Sending Request with {"host":"alexa.amazon.de","path":"/api/behaviors/v2/automations?limit=2000","method":"GET","timeout":30000,"headers":{}} alexa2.0 2021-10-11 16:10:07.021 debug Alexa-Remote: No authentication check needed (time elapsed 2447)syslog:
Oct 11 16:10:07 ioBroker kernel: [11915.196468] 8<--- cut here --- Oct 11 16:10:07 ioBroker kernel: [11915.196503] pgd = 4a9e14fe Oct 11 16:10:07 ioBroker kernel: [11915.196514] [059a659e] *pgd=0d4ab003, *pmd=f84e7003dmesg:
[Mo Okt 11 15:48:30 2021] Alignment trap: not handling instruction f4430add at [<b6374b40>] [Mo Okt 11 15:48:30 2021] 8<--- cut here --- [Mo Okt 11 15:48:30 2021] Unhandled fault: alignment exception (0xa21) at 0x054f564e [Mo Okt 11 15:48:30 2021] pgd = 2d9e975c [Mo Okt 11 15:48:30 2021] [054f564e] *pgd=0d470003, *pmd=b6e17003 [Mo Okt 11 16:10:07 2021] Alignment trap: not handling instruction f4430add at [<b636cb40>] [Mo Okt 11 16:10:07 2021] 8<--- cut here --- [Mo Okt 11 16:10:07 2021] Unhandled fault: alignment exception (0xa21) at 0x059a659e [Mo Okt 11 16:10:07 2021] pgd = 4a9e14fe [Mo Okt 11 16:10:07 2021] [059a659e] *pgd=0d4ab003, *pmd=f84e7003 -
@skb Ok, schade - hätte ja sein können
-
@skb sagte in Alexa Adapter startet nach Update auf 3.10.4 nicht mehr:
Habe die influxdb gestoppt.
oder nur die Instanz?
-
@homoran Den Adapter habe ich laufen lassen, damit er cached, wie Apollon sagte.
Den Server via:sudo service influxdb stopgestoppt.
-
@apollon77 Wenn man wüsste, was diese Fehler aussagen, könnte man ja weiterschauen. Jedoch sagen mir diese Fehler leider so gut wie überhaupt nichts - sonst wäre es ja einfach
-
Das sind Fehler im Speichermanagements des Kernels.
Wo die aber den Ursprung haben ist schwer zu debuggen. -
Ich hoffe ich kriege auf das eine oben noch infos, dann kriegen wir vllt noch bissl mehr log
-
@apollon77 Von mir? Fehlt noch etwas? Wenn ja, sag' mir kurz, was Du brauchst.
-
@thomas-braun Meinst Du diese?
[Mo Okt 11 13:07:02 2021] Unhandled fault: alignment exception (0xa21) at 0x04396546 [Mo Okt 11 13:07:02 2021] pgd = 6348d82f [Mo Okt 11 13:07:02 2021] [04396546] *pgd=0b5dd003, *pmd=8e081003Die kommen immer, wenn der Adapter versucht zu starten.
-
@skb
Ja, die Abkürzungen stehen da z. B. für:pgd = page global directory
pud = page upper directory
pmd = page middle directoryHat also mit der Verwaltung der sog. memory page tables zu tun.
-
@thomas-braun Ok, aber sie kommen halt nur dann, wenn die Instanz des Alexa Adapters startet. Sonst kann ich sie nicht finden.
-
Wenn ich das richtig interpretiere wird da Speicherbereich doppelt zugewiesen:
Unhandled fault: alignment exception (0xa21) at 0x04396546
[04396546] *pgd=0b5dd003, *pmd=8e081003
-
@thomas-braun So verstehe ich es auch ... Da kann der Adapter nix ausrichten - das ist das Problem . Frage ist wer "verantwortlich" ist ...
-
@apollon77 ich brauche hier noch ne info ... dann versuchen wir das noch obs mehr log gibt
