Sonoff Adapter bleibt Gelb [solved]

@ceng
Also der Fehler sagt der Port ist in Benutzung..

Oder hast du jetzt n anderen Fehler??

ceng

@ilovegym Ja, Du hast Recht, der Port ist in Benutzung.

Wenn ich den Sonoff Adapter ausschalte ist die Fehlermeldung weg -> Kein Port in Benutzung
Wenn ich den Sonoff Adapter starte, kommt die Fehlermeldung, dass der Port schon in Benutzung ist

Wenn ich den Sonoff Adapter auf irgendeinen anderen Port lege, kommt ebenso die Meldung, dass der Port in Benutzung ist.

Glasfaser

@ceng

Zeige mal die Ausgaben von :

netstat -tle | grep 1883

netstat -tle

ceng

@glasfaser

Habe immer wieder die gleiche Information: Sobald ich den Sonoff Adapter starte, meldet das System, dass der Port schon benutzt ist. Wenn der Adapter gestoppt ist, dann ist der Port auch nicht in Benutzung.

Ralla66

@ceng

dreh das mal, Sonoff auf Port 1885, Mqtt auf Port 1883

Glasfaser

@ceng

Bitte keine Screenshot´s !

Die Ausgabe hier rein :.

zu CodeTags ...

Starte mal den Adapter und dann die Ausgabe von :

ps auxww|grep io

ceng

@ralla66

pi@iobroker:/opt/iobroker $ netstat -tle | grep 1883
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      iobroker   119560
pi@iobroker:/opt/iobroker $ netstat -tle
Aktive Internetverbindungen (Nur Server)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       Benutzer   Inode
tcp        0      0 0.0.0.0:1885            0.0.0.0:*               LISTEN      iobroker   117707
tcp        0      0 localhost:9000          0.0.0.0:*               LISTEN      iobroker   119311
tcp        0      0 localhost:9001          0.0.0.0:*               LISTEN      iobroker   119304
tcp        0      0 0.0.0.0:9999            0.0.0.0:*               LISTEN      root       17435
tcp        0      0 0.0.0.0:http            0.0.0.0:*               LISTEN      root       17433
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      root       18531
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      iobroker   119560
tcp        0      0 0.0.0.0:https           0.0.0.0:*               LISTEN      root       17437
tcp6       0      0 [::]:tproxy             [::]:*                  LISTEN      iobroker   117483
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      root       18533
pi@iobroker:/opt/iobroker $

und

pi@iobroker:/opt/iobroker $ iobroker list instances
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
  system.adapter.devices.0                : devices               : iobroker                                 -  enabled
  system.adapter.dwd.0                    : dwd                   : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
  system.adapter.feiertage.0              : feiertage             : iobroker                                 -  enabled
  system.adapter.flot.0                   : flot                  : iobroker                                 - disabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker                                 -  enabled
+ system.adapter.history.0                : history               : iobroker                                 -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : iobroker                                 - disabled
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
  system.adapter.material.0               : material              : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
  system.adapter.roomba.0                 : roomba                : iobroker                                 - disabled
  system.adapter.roomba.1                 : roomba                : iobroker                                 - disabled
+ system.adapter.sonoff.0                 : sonoff                : iobroker                                 -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : iobroker                                 -  enabled
+ system.adapter.unifi.0                  : unifi                 : iobroker                                 -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wifilight.0              : wifilight             : iobroker                                 -  enabled

Schon ein merkwürdiges Verhalten, oder?

Glasfaser

@ceng

@glasfaser sagte in Sonoff Adapter bleibt Gelb:
Starte mal den Adapter und dann die Ausgabe von :
ps auxww|grep io

?

Ralla66

@ceng

Sonoff Adapter bleibt Gelb ?
Adapter sind unter Automatische Erstellung von Zuständen alle 3 Haken gesetzt ?

ceng

@ralla66
Adapter Gelb - alle drei Zustände angehaktj

ceng

@Glasfaser ```
auxww|grep io
S 16:10 0:00 [migration/0]
S 16:10 0:00 [migration/1]
S 16:10 0:00 [migration/2]
S 16:10 0:00 [migration/3]
I< 16:10 0:00 [blkcg_punt_bio]
I< 16:10 0:00 [rpciod]
I< 16:10 0:00 [xprtiod]
I< 16:10 0:00 [nfsiod]
I< 16:10 0:00 [DWC Notificatio]
Ss 16:10 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
Ss 16:10 0:03 avahi-daemon: running [iobroker.local]
S+ 19:05 0:00 tail -f /opt/iobroker/log/iobroker.current.log
Ssl 20:02 1:25 iobroker.js-controller
Sl 20:02 0:10 io.admin.0
Sl 20:02 0:10 io.alexa2.0
Sl 20:02 0:06 io.backitup.0
Sl 20:02 0:03 io.email.0
Sl 20:02 0:03 io.fullybrowser.0
Sl 20:02 0:12 io.mqtt.0
Sl 20:02 0:11 io.history.0
Sl 20:02 0:03 io.sonoff.0
Sl 20:02 0:04 io.info.0
Sl 20:02 0:19 io.javascript.0
Sl 20:03 0:03 io.ping.0
Sl 20:03 0:09 io.tr-064.0
Sl 20:03 0:05 io.unifi.0
Sl 20:03 0:04 io.web.0
Sl 20:03 0:02 io.wifilight.0
Sl 20:03 0:02 io.vis-inventwo.0
S+ 20:12 0:00 grep --color=auto io

Ralla66

@ceng

der Adapter bleibt Gelb wenn kein Gerät verbunden ist oder eine Mqtt Aktion auf Port 1885 geschieht.
Welches Sonoff Gerät oder Tasmota Esp ist verbunden ?

ceng

@ralla66
Der MQTT Adapter bleibt seit heute Mittag gelb, obwohl die "Clients" MQTT Messegas schicken.

Ich habe Sonoffs mit Tasmota (auf Port Sonoff Adapter) und NodeMCUs mit EasyESP (auf Port MQTT Adapter).

Ralla66

@ceng

prüfe ob die Sonoffs mit Tasmota der Port auf 1885 steht und die Einstellungen richtig sind. Bild bitte Mqtt Tasmota.

ceng

@ralla66
ich nehme mal an von der MQTT Seite.

der Host "iobroker" wird übrigens tadellos aufgelöst.

19:28:04.494 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"iobroker","MqttPort":1885,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_54A582","MqttUser":"mqtt","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:28:04.517 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:04","Local":"2021-06-25T19:28:04","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}
19:28:04.535 RSL: STATUS10 = {"StatusSNS":{"Time":"2021-06-25T19:28:04","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}}
19:28:04.549 RSL: STATUS11 = {"StatusSTS":{"Time":"2021-06-25T19:28:04","Uptime":"0T00:00:50","UptimeSec":50,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:05"}}}
19:28:12.124 MQT: Verbindungsversuch...
19:28:16.146 MQT: Verbindung fehlgeschlagen aufgrund von iobroker:1885, rc -4. Wiederversuch in 30 s
19:28:16.244 RSL: STATUS = {"Status":{"Module":4,"DeviceName":"tasmota-54A582-1410","FriendlyName":["tasmota-54A582-1410"],"Topic":"tasmota_54A582","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
19:28:16.274 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"sonoffs","OtaUrl":"http://192.168.178.12:9999/data/firmwares/tasmota.bin","RestartReason":"Software/System restart","Uptime":"0T00:01:02","StartupUTC":"2021-06-25T18:27:14","Sleep":50,"CfgHolder":4617,"BootCount":995,"BCResetTime":"2020-05-02T16:41:10","SaveCount":3440,"SaveAddress":"F5000"}}
19:28:16.306 RSL: STATUS2 = {"StatusFWR":{"Version":"9.5.0(tasmota)","BuildDateTime":"2021.06.17 08:28:30","Boot":7,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"425/699"}}
19:28:16.325 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"domus1","LogPort":514,"SSId":["SmartDevices","FRITZ6591 Lenz"],"TelePeriod":300,"Resolution":"55A180C0","SetOption":["00000009","2805C8000100060000005AFF000000000000","00000081","00006000","00000000"]}}
19:28:16.357 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":608,"Free":392,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1420C2","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","00000020"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45","Sensors":"1,2,3,4,5,6"}}
19:28:16.387 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota_54A582-1410","IPAddress":"192.168.178.66","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.1","Mac":"CC:50:E3:54:A5:82","Webserver":2,"WifiConfig":2,"WifiPower":17.0}}
19:28:16.408 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"iobroker","MqttPort":1885,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_54A582","MqttUser":"mqtt","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:28:16.431 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:16","Local":"2021-06-25T19:28:16","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}
19:28:16.449 RSL: STATUS10 = {"StatusSNS":{"Time":"2021-06-25T19:28:16","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}}
19:28:16.462 RSL: STATUS11 = {"StatusSTS":{"Time":"2021-06-25T19:28:16","Uptime":"0T00:01:02","UptimeSec":62,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":409,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}}}
19:28:19.061 UPP: Multicast (wieder-)verbunden
19:28:20.574 RSL: STATUS = {"Status":{"Module":4,"DeviceName":"tasmota-54A582-1410","FriendlyName":["tasmota-54A582-1410"],"Topic":"tasmota_54A582","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
19:28:20.604 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"sonoffs","OtaUrl":"http://192.168.178.12:9999/data/firmwares/tasmota.bin","RestartReason":"Software/System restart","Uptime":"0T00:01:06","StartupUTC":"2021-06-25T18:27:14","Sleep":50,"CfgHolder":4617,"BootCount":995,"BCResetTime":"2020-05-02T16:41:10","SaveCount":3440,"SaveAddress":"F5000"}}
19:28:20.636 RSL: STATUS2 = {"StatusFWR":{"Version":"9.5.0(tasmota)","BuildDateTime":"2021.06.17 08:28:30","Boot":7,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"425/699"}}
19:28:20.656 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"domus1","LogPort":514,"SSId":["SmartDevices","FRITZ6591 Lenz"],"TelePeriod":300,"Resolution":"55A180C0","SetOption":["00000009","2805C8000100060000005AFF000000000000","00000081","00006000","00000000"]}}
19:28:20.687 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":608,"Free":392,"Heap":24,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1420C2","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","00000020"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45","Sensors":"1,2,3,4,5,6"}}
19:28:20.717 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota_54A582-1410","IPAddress":"192.168.178.66","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.1","Mac":"CC:50:E3:54:A5:82","Webserver":2,"WifiConfig":2,"WifiPower":17.0}}
19:28:20.738 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"iobroker","MqttPort":1885,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_54A582","MqttUser":"mqtt","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:28:20.761 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:20","Local":"2021-06-25T19:28:20","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}
19:28:20.779 RSL: STATUS10 = {"StatusSNS":{"Time":"2021-06-25T19:28:20","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}}
19:28:20.793 RSL: STATUS11 = {"StatusSTS":{"Time":"2021-06-25T19:28:20","Uptime":"0T00:01:06","UptimeSec":66,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":106,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}}}
19:28:28.263 RSL: STATUS = {"Status":{"Module":4,"DeviceName":"tasmota-54A582-1410","FriendlyName":["tasmota-54A582-1410"],"Topic":"tasmota_54A582","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
19:28:28.293 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"sonoffs","OtaUrl":"http://192.168.178.12:9999/data/firmwares/tasmota.bin","RestartReason":"Software/System restart","Uptime":"0T00:01:14","StartupUTC":"2021-06-25T18:27:14","Sleep":50,"CfgHolder":4617,"BootCount":995,"BCResetTime":"2020-05-02T16:41:10","SaveCount":3440,"SaveAddress":"F5000"}}
19:28:28.326 RSL: STATUS2 = {"StatusFWR":{"Version":"9.5.0(tasmota)","BuildDateTime":"2021.06.17 08:28:30","Boot":7,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"425/699"}}
19:28:28.344 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"domus1","LogPort":514,"SSId":["SmartDevices","FRITZ6591 Lenz"],"TelePeriod":300,"Resolution":"55A180C0","SetOption":["00000009","2805C8000100060000005AFF000000000000","00000081","00006000","00000000"]}}
19:28:28.377 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":608,"Free":392,"Heap":24,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1420C2","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","00000020"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45","Sensors":"1,2,3,4,5,6"}}
19:28:28.406 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota_54A582-1410","IPAddress":"192.168.178.66","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.1","Mac":"CC:50:E3:54:A5:82","Webserver":2,"WifiConfig":2,"WifiPower":17.0}}
19:28:28.427 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"iobroker","MqttPort":1885,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_54A582","MqttUser":"mqtt","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:28:28.450 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:28","Local":"2021-06-25T19:28:28","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}
19:28:28.468 RSL: STATUS10 = {"StatusSNS":{"Time":"2021-06-25T19:28:28","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}}
19:28:28.482 RSL: STATUS11 = {"StatusSTS":{"Time":"2021-06-25T19:28:28","Uptime":"0T00:01:14","UptimeSec":74,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}}}

Ralla66

@ceng

unter Host trage die IP ein wo der Sonoff Adapter läuft. Meist 192.168.xxx.xxx .
Telemetrieperiode in Tasmota stellst du auf 10 anstatt 300.

ceng

@ralla66
Diese Einstellungen haben doch alle bis zum Hardwarewechsel funktioniert. Ich kann die umstellen, aber mit welchem Ziel?

Ralla66

@ceng

Ziel ? Weil das bei mir läuft !

Telemetrieperiode ist die Updatezeit im Sonoffadapter, statt 5 min ( 300 ) 10 ( 10 sec ).
Sonst kann du lange warten auf Reaktion.

Thomas Braun

@ceng
Deine Uhrzeit/Zeitzone ist nicht korrekt, scheint mir.
Das kann auch zu seltsamen Fehlern führen.

19:28:20.761 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:20","Local":"2021-06-25T19:28:20","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}

ceng

@ralla66

19:38:11.237 MQT: Verbindung fehlgeschlagen aufgrund von 192.168.178.12:1885, rc -4. Wiederversuch in 50 s
19:38:11.357 CMD: TelePeriod 10
19:38:11.363 RSL: RESULT = {"TelePeriod":10}
19:38:12.140 UPP: Multicast (wieder-)verbunden
19:38:12.293 RSL: STATE = {"Time":"2021-06-25T19:38:12","Uptime":"0T00:02:44","UptimeSec":164,"Heap":26,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":229,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:05"}}
19:38:12.316 RSL: SENSOR = {"Time":"2021-06-25T19:38:12","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}

NEWS

Sonoff Adapter bleibt Gelb [solved]

Support us

463
Online

32.0k
Users

80.4k
Topics

1.3m
Posts

NEWS

Sonoff Adapter bleibt Gelb [solved]

Support us

463Online

32.0kUsers

80.4kTopics

1.3mPosts

463
Online

32.0k
Users

80.4k
Topics

1.3m
Posts