Sonoff Adapter bleibt Gelb [solved]

? Offline

gibt dann nur 2 Möglichkeiten:

a) der Sonoff-Adapter wurde nicht sauber beendet und läuft doppelt, also reboot und dann nochmal probieren...

b) irgendwas anderes belegt den Port... also mal ändern auf 1886 oder so, mal n client drauf configurieren und schauen, obs mit einem geht..

Jan1

@ceng
probier mal im IOBroker Verzeichnis den Befehl:

iobroker list instances

Dann siehst besser was den Port belegt, da hier die Adapter samt zugehörigem Port gelistet werden.

ceng

@jan1
Sonoff auf 1883
mqtt auf 1884

mit iobroker list instances ist keine Doppelbelegung zu erkennen

ceng

@ilovegym

Hmmm...

a.) läuft doppelt -> bereits diverse Reboots durchgeführt. raspi-update durchgeführt inkl. reboot
b.) auch auf Port 6489 gleiches Verhalten

ceng

Kann es sein, dass die beiden Adapter nicht mit der neuen Hardware arbeiten können? Oder gar die Software?

Sehr abwegig, aber es wurde beim Umzug nichts verändert, ausser natürlich die Hardware.

Sourcen recomplieren? Die neue Hardware dem iObroker explizit bekannt geben?

? Offline

@ceng
Also der Fehler sagt der Port ist in Benutzung..

Oder hast du jetzt n anderen Fehler??

ceng

@ilovegym Ja, Du hast Recht, der Port ist in Benutzung.

Wenn ich den Sonoff Adapter ausschalte ist die Fehlermeldung weg -> Kein Port in Benutzung
Wenn ich den Sonoff Adapter starte, kommt die Fehlermeldung, dass der Port schon in Benutzung ist

Wenn ich den Sonoff Adapter auf irgendeinen anderen Port lege, kommt ebenso die Meldung, dass der Port in Benutzung ist.

Glasfaser

@ceng

Zeige mal die Ausgaben von :

netstat -tle | grep 1883

netstat -tle

ceng

@glasfaser

Habe immer wieder die gleiche Information: Sobald ich den Sonoff Adapter starte, meldet das System, dass der Port schon benutzt ist. Wenn der Adapter gestoppt ist, dann ist der Port auch nicht in Benutzung.

Ralla66

@ceng

dreh das mal, Sonoff auf Port 1885, Mqtt auf Port 1883

Glasfaser

@ceng

Bitte keine Screenshot´s !

Die Ausgabe hier rein :.

zu CodeTags ...

Starte mal den Adapter und dann die Ausgabe von :

ps auxww|grep io

ceng

@ralla66

pi@iobroker:/opt/iobroker $ netstat -tle | grep 1883
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      iobroker   119560
pi@iobroker:/opt/iobroker $ netstat -tle
Aktive Internetverbindungen (Nur Server)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       Benutzer   Inode
tcp        0      0 0.0.0.0:1885            0.0.0.0:*               LISTEN      iobroker   117707
tcp        0      0 localhost:9000          0.0.0.0:*               LISTEN      iobroker   119311
tcp        0      0 localhost:9001          0.0.0.0:*               LISTEN      iobroker   119304
tcp        0      0 0.0.0.0:9999            0.0.0.0:*               LISTEN      root       17435
tcp        0      0 0.0.0.0:http            0.0.0.0:*               LISTEN      root       17433
tcp        0      0 0.0.0.0:ssh             0.0.0.0:*               LISTEN      root       18531
tcp        0      0 0.0.0.0:1883            0.0.0.0:*               LISTEN      iobroker   119560
tcp        0      0 0.0.0.0:https           0.0.0.0:*               LISTEN      root       17437
tcp6       0      0 [::]:tproxy             [::]:*                  LISTEN      iobroker   117483
tcp6       0      0 [::]:ssh                [::]:*                  LISTEN      root       18533
pi@iobroker:/opt/iobroker $

und

pi@iobroker:/opt/iobroker $ iobroker list instances
+ system.adapter.admin.0                  : admin                 : iobroker                                 -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.alexa2.0                 : alexa2                : iobroker                                 -  enabled
+ system.adapter.backitup.0               : backitup              : iobroker                                 -  enabled
  system.adapter.devices.0                : devices               : iobroker                                 -  enabled
  system.adapter.dwd.0                    : dwd                   : iobroker                                 -  enabled
+ system.adapter.email.0                  : email                 : iobroker                                 -  enabled
  system.adapter.feiertage.0              : feiertage             : iobroker                                 -  enabled
  system.adapter.flot.0                   : flot                  : iobroker                                 - disabled
+ system.adapter.fullybrowser.0           : fullybrowser          : iobroker                                 -  enabled
+ system.adapter.history.0                : history               : iobroker                                 -  enabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : iobroker                                 -  enabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : iobroker                                 - disabled
+ system.adapter.info.0                   : info                  : iobroker                                 -  enabled
+ system.adapter.javascript.0             : javascript            : iobroker                                 -  enabled
  system.adapter.material.0               : material              : iobroker                                 -  enabled
+ system.adapter.mqtt.0                   : mqtt                  : iobroker                                 -  enabled, port: 1883, bind: 0.0.0.0
+ system.adapter.ping.0                   : ping                  : iobroker                                 -  enabled
  system.adapter.roomba.0                 : roomba                : iobroker                                 - disabled
  system.adapter.roomba.1                 : roomba                : iobroker                                 - disabled
+ system.adapter.sonoff.0                 : sonoff                : iobroker                                 -  enabled, port: 1885, bind: 0.0.0.0
+ system.adapter.tr-064.0                 : tr-064                : iobroker                                 -  enabled
+ system.adapter.unifi.0                  : unifi                 : iobroker                                 -  enabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : iobroker                                 -  enabled
  system.adapter.vis.0                    : vis                   : iobroker                                 -  enabled
+ system.adapter.web.0                    : web                   : iobroker                                 -  enabled, port: 8082, bind: 0.0.0.0, run as: admin
+ system.adapter.wifilight.0              : wifilight             : iobroker                                 -  enabled

Schon ein merkwürdiges Verhalten, oder?

Glasfaser

@ceng

@glasfaser sagte in Sonoff Adapter bleibt Gelb:
Starte mal den Adapter und dann die Ausgabe von :
ps auxww|grep io

?

Ralla66

@ceng

Sonoff Adapter bleibt Gelb ?
Adapter sind unter Automatische Erstellung von Zuständen alle 3 Haken gesetzt ?

ceng

@ralla66
Adapter Gelb - alle drei Zustände angehaktj

ceng

@Glasfaser ```
auxww|grep io
S 16:10 0:00 [migration/0]
S 16:10 0:00 [migration/1]
S 16:10 0:00 [migration/2]
S 16:10 0:00 [migration/3]
I< 16:10 0:00 [blkcg_punt_bio]
I< 16:10 0:00 [rpciod]
I< 16:10 0:00 [xprtiod]
I< 16:10 0:00 [nfsiod]
I< 16:10 0:00 [DWC Notificatio]
Ss 16:10 0:00 /usr/bin/dbus-daemon --system --address=systemd: --nofork --nopidfile --systemd-activation --syslog-only
Ss 16:10 0:03 avahi-daemon: running [iobroker.local]
S+ 19:05 0:00 tail -f /opt/iobroker/log/iobroker.current.log
Ssl 20:02 1:25 iobroker.js-controller
Sl 20:02 0:10 io.admin.0
Sl 20:02 0:10 io.alexa2.0
Sl 20:02 0:06 io.backitup.0
Sl 20:02 0:03 io.email.0
Sl 20:02 0:03 io.fullybrowser.0
Sl 20:02 0:12 io.mqtt.0
Sl 20:02 0:11 io.history.0
Sl 20:02 0:03 io.sonoff.0
Sl 20:02 0:04 io.info.0
Sl 20:02 0:19 io.javascript.0
Sl 20:03 0:03 io.ping.0
Sl 20:03 0:09 io.tr-064.0
Sl 20:03 0:05 io.unifi.0
Sl 20:03 0:04 io.web.0
Sl 20:03 0:02 io.wifilight.0
Sl 20:03 0:02 io.vis-inventwo.0
S+ 20:12 0:00 grep --color=auto io

Ralla66

@ceng

der Adapter bleibt Gelb wenn kein Gerät verbunden ist oder eine Mqtt Aktion auf Port 1885 geschieht.
Welches Sonoff Gerät oder Tasmota Esp ist verbunden ?

ceng

@ralla66
Der MQTT Adapter bleibt seit heute Mittag gelb, obwohl die "Clients" MQTT Messegas schicken.

Ich habe Sonoffs mit Tasmota (auf Port Sonoff Adapter) und NodeMCUs mit EasyESP (auf Port MQTT Adapter).

Ralla66

@ceng

prüfe ob die Sonoffs mit Tasmota der Port auf 1885 steht und die Einstellungen richtig sind. Bild bitte Mqtt Tasmota.

ceng

@ralla66
ich nehme mal an von der MQTT Seite.

der Host "iobroker" wird übrigens tadellos aufgelöst.

19:28:04.494 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"iobroker","MqttPort":1885,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_54A582","MqttUser":"mqtt","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:28:04.517 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:04","Local":"2021-06-25T19:28:04","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}
19:28:04.535 RSL: STATUS10 = {"StatusSNS":{"Time":"2021-06-25T19:28:04","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}}
19:28:04.549 RSL: STATUS11 = {"StatusSTS":{"Time":"2021-06-25T19:28:04","Uptime":"0T00:00:50","UptimeSec":50,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":74,"Signal":-63,"LinkCount":1,"Downtime":"0T00:00:05"}}}
19:28:12.124 MQT: Verbindungsversuch...
19:28:16.146 MQT: Verbindung fehlgeschlagen aufgrund von iobroker:1885, rc -4. Wiederversuch in 30 s
19:28:16.244 RSL: STATUS = {"Status":{"Module":4,"DeviceName":"tasmota-54A582-1410","FriendlyName":["tasmota-54A582-1410"],"Topic":"tasmota_54A582","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
19:28:16.274 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"sonoffs","OtaUrl":"http://192.168.178.12:9999/data/firmwares/tasmota.bin","RestartReason":"Software/System restart","Uptime":"0T00:01:02","StartupUTC":"2021-06-25T18:27:14","Sleep":50,"CfgHolder":4617,"BootCount":995,"BCResetTime":"2020-05-02T16:41:10","SaveCount":3440,"SaveAddress":"F5000"}}
19:28:16.306 RSL: STATUS2 = {"StatusFWR":{"Version":"9.5.0(tasmota)","BuildDateTime":"2021.06.17 08:28:30","Boot":7,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"425/699"}}
19:28:16.325 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"domus1","LogPort":514,"SSId":["SmartDevices","FRITZ6591 Lenz"],"TelePeriod":300,"Resolution":"55A180C0","SetOption":["00000009","2805C8000100060000005AFF000000000000","00000081","00006000","00000000"]}}
19:28:16.357 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":608,"Free":392,"Heap":23,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1420C2","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","00000020"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45","Sensors":"1,2,3,4,5,6"}}
19:28:16.387 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota_54A582-1410","IPAddress":"192.168.178.66","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.1","Mac":"CC:50:E3:54:A5:82","Webserver":2,"WifiConfig":2,"WifiPower":17.0}}
19:28:16.408 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"iobroker","MqttPort":1885,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_54A582","MqttUser":"mqtt","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:28:16.431 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:16","Local":"2021-06-25T19:28:16","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}
19:28:16.449 RSL: STATUS10 = {"StatusSNS":{"Time":"2021-06-25T19:28:16","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}}
19:28:16.462 RSL: STATUS11 = {"StatusSTS":{"Time":"2021-06-25T19:28:16","Uptime":"0T00:01:02","UptimeSec":62,"Heap":23,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":409,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}}}
19:28:19.061 UPP: Multicast (wieder-)verbunden
19:28:20.574 RSL: STATUS = {"Status":{"Module":4,"DeviceName":"tasmota-54A582-1410","FriendlyName":["tasmota-54A582-1410"],"Topic":"tasmota_54A582","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
19:28:20.604 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"sonoffs","OtaUrl":"http://192.168.178.12:9999/data/firmwares/tasmota.bin","RestartReason":"Software/System restart","Uptime":"0T00:01:06","StartupUTC":"2021-06-25T18:27:14","Sleep":50,"CfgHolder":4617,"BootCount":995,"BCResetTime":"2020-05-02T16:41:10","SaveCount":3440,"SaveAddress":"F5000"}}
19:28:20.636 RSL: STATUS2 = {"StatusFWR":{"Version":"9.5.0(tasmota)","BuildDateTime":"2021.06.17 08:28:30","Boot":7,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"425/699"}}
19:28:20.656 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"domus1","LogPort":514,"SSId":["SmartDevices","FRITZ6591 Lenz"],"TelePeriod":300,"Resolution":"55A180C0","SetOption":["00000009","2805C8000100060000005AFF000000000000","00000081","00006000","00000000"]}}
19:28:20.687 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":608,"Free":392,"Heap":24,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1420C2","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","00000020"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45","Sensors":"1,2,3,4,5,6"}}
19:28:20.717 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota_54A582-1410","IPAddress":"192.168.178.66","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.1","Mac":"CC:50:E3:54:A5:82","Webserver":2,"WifiConfig":2,"WifiPower":17.0}}
19:28:20.738 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"iobroker","MqttPort":1885,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_54A582","MqttUser":"mqtt","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:28:20.761 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:20","Local":"2021-06-25T19:28:20","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}
19:28:20.779 RSL: STATUS10 = {"StatusSNS":{"Time":"2021-06-25T19:28:20","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}}
19:28:20.793 RSL: STATUS11 = {"StatusSTS":{"Time":"2021-06-25T19:28:20","Uptime":"0T00:01:06","UptimeSec":66,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":106,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}}}
19:28:28.263 RSL: STATUS = {"Status":{"Module":4,"DeviceName":"tasmota-54A582-1410","FriendlyName":["tasmota-54A582-1410"],"Topic":"tasmota_54A582","ButtonTopic":"0","Power":1,"PowerOnState":3,"LedState":1,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":0,"PowerRetain":0,"InfoRetain":0,"StateRetain":0}}
19:28:28.293 RSL: STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"sonoffs","OtaUrl":"http://192.168.178.12:9999/data/firmwares/tasmota.bin","RestartReason":"Software/System restart","Uptime":"0T00:01:14","StartupUTC":"2021-06-25T18:27:14","Sleep":50,"CfgHolder":4617,"BootCount":995,"BCResetTime":"2020-05-02T16:41:10","SaveCount":3440,"SaveAddress":"F5000"}}
19:28:28.326 RSL: STATUS2 = {"StatusFWR":{"Version":"9.5.0(tasmota)","BuildDateTime":"2021.06.17 08:28:30","Boot":7,"Core":"2_7_4_9","SDK":"2.2.2-dev(38a443e)","CpuFrequency":80,"Hardware":"ESP8266EX","CR":"425/699"}}
19:28:28.344 RSL: STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"domus1","LogPort":514,"SSId":["SmartDevices","FRITZ6591 Lenz"],"TelePeriod":300,"Resolution":"55A180C0","SetOption":["00000009","2805C8000100060000005AFF000000000000","00000081","00006000","00000000"]}}
19:28:28.377 RSL: STATUS4 = {"StatusMEM":{"ProgramSize":608,"Free":392,"Heap":24,"ProgramFlashSize":1024,"FlashSize":1024,"FlashChipId":"1420C2","FlashFrequency":40,"FlashMode":3,"Features":["00000407","8FDAC787","04368001","000000CF","010013C0","C000F981","00004004","00001000","00000020"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37,45","Sensors":"1,2,3,4,5,6"}}
19:28:28.406 RSL: STATUS5 = {"StatusNET":{"Hostname":"tasmota_54A582-1410","IPAddress":"192.168.178.66","Gateway":"192.168.178.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.178.1","Mac":"CC:50:E3:54:A5:82","Webserver":2,"WifiConfig":2,"WifiPower":17.0}}
19:28:28.427 RSL: STATUS6 = {"StatusMQT":{"MqttHost":"iobroker","MqttPort":1885,"MqttClientMask":"tasmota_%06X","MqttClient":"tasmota_54A582","MqttUser":"mqtt","MqttCount":0,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30,"SOCKET_TIMEOUT":4}}
19:28:28.450 RSL: STATUS7 = {"StatusTIM":{"UTC":"2021-06-25T18:28:28","Local":"2021-06-25T19:28:28","StartDST":"2021-03-28T02:00:00","EndDST":"2021-10-31T03:00:00","Timezone":"+01:00","Sunrise":"04:48","Sunset":"20:57"}}
19:28:28.468 RSL: STATUS10 = {"StatusSNS":{"Time":"2021-06-25T19:28:28","AM2301":{"Temperature":null,"Humidity":null,"DewPoint":null},"TempUnit":"C"}}
19:28:28.482 RSL: STATUS11 = {"StatusSTS":{"Time":"2021-06-25T19:28:28","Uptime":"0T00:01:14","UptimeSec":74,"Heap":24,"SleepMode":"Dynamic","Sleep":50,"LoadAvg":19,"MqttCount":0,"POWER":"ON","Wifi":{"AP":1,"SSId":"SmartDevices","BSSId":"F0:9F:C2:21:D8:EF","Channel":6,"Mode":"11n","RSSI":76,"Signal":-62,"LinkCount":1,"Downtime":"0T00:00:05"}}}

Community Forum

NEWS

Sonoff Adapter bleibt Gelb [solved]

Support us

710

32.5k

81.8k

1.3m