[ Geklärt ] Wie kann ich eine HDD gegen SSD tauschen
-
@ente34
Dann werde ich jetzt über iobroker dot net
die Installation ausführen.
@altersrentner
Das root-Filesystem hast Du erweitert?df -h -
@altersrentner
Das root-Filesystem hast Du erweitert?df -h@ente34
Nein, und jetzt?
Die Installation läuft gerade -
@ente34
Nein, und jetzt?
Die Installation läuft gerade@altersrentner Danach machen.
Ist zwar die falsche Reihenfolge aber kannst nicht mehr wie erneut von vorne anfangen.
-
@ente34
Nein, und jetzt?
Die Installation läuft gerade@altersrentner
Kannst Du noch später machen ...
Falls Du keine weiteren Partitionen auf der SSD brauchst
sudo raspi-config
6-Advanved Options/A1 Expand filesystem -
@altersrentner
Das root-Filesystem hast Du erweitert?df -hpi@raspberrypi:~ $ df -h Filesystem Size Used Avail Use% Mounted on /dev/root 440G 3.5G 419G 1% / devtmpfs 1.8G 0 1.8G 0% /dev tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs 1.9G 17M 1.9G 1% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sda1 253M 46M 207M 18% /boot tmpfs 383M 0 383M 0% /run/user/1000 pi@raspberrypi:~ $ -
pi@raspberrypi:~ $ df -h Filesystem Size Used Avail Use% Mounted on /dev/root 440G 3.5G 419G 1% / devtmpfs 1.8G 0 1.8G 0% /dev tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs 1.9G 17M 1.9G 1% /run tmpfs 5.0M 4.0K 5.0M 1% /run/lock tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/sda1 253M 46M 207M 18% /boot tmpfs 383M 0 383M 0% /run/user/1000 pi@raspberrypi:~ $@altersrentner
Alles gut, musst nichts machen -
@altersrentner
Alles gut, musst nichts machen@ente34
So, der Broker steht
Das System sollte jetzt jungfräulich sein-oder
Und jetzt kommt der schwierigste Teil.
Ich müsste von der HDD ein Backup machen,
bzw. das letzte Backup einspielen.
Dafür muss ich die BackitUp Instanz laden.Hoffentlich gibt es dann mit Grafana und Influx kein Problem.
Das war ja dazumal auch ein Kraftakt bis die Installation geklappt hat.MfG Michael
-
@altersrentner
Hallo,
Seit 13 Uhr läuft ein Backup und es ist noch nicht fertig.
Ist das normal, das es so lange dauert?
MfG
Michael -
@altersrentner
Hallo,
Seit 13 Uhr läuft ein Backup und es ist noch nicht fertig.
Ist das normal, das es so lange dauert?
MfG
Michael@altersrentner Kann man so nicht sagen.
Wie läuft denn das? Mehrere Terrybyte über einen USB1.0-Port zu schieben kann Tage dauern. -
@altersrentner Kann man so nicht sagen.
Wie läuft denn das? Mehrere Terrybyte über einen USB1.0-Port zu schieben kann Tage dauern.@thomas-braun Gibt es eine andere Möglichkeit?
-
@thomas-braun Gibt es eine andere Möglichkeit?
@altersrentner Welche der Möglichkeiten setzt du denn da nun ein?
Backup von woher? Lokal? Über ein NAS? Über Google Drive? Passiert im iobroker log file noch irgendwas? Werden da noch aufwändig Adapter/npm module durchkompiliert? -
@altersrentner Welche der Möglichkeiten setzt du denn da nun ein?
Backup von woher? Lokal? Über ein NAS? Über Google Drive? Passiert im iobroker log file noch irgendwas? Werden da noch aufwändig Adapter/npm module durchkompiliert?@thomas-braun Ich habe das Backup über Bachitup angeschoben.
Speicherort ist Google Drive.
Das Backup ist von der HDD."Passiert im iobroker log file noch irgendwas"
Nein
Das Backup ist wie immer 6MB groß. -
@thomas-braun Ich habe das Backup über Bachitup angeschoben.
Speicherort ist Google Drive.
Das Backup ist von der HDD."Passiert im iobroker log file noch irgendwas"
Nein
Das Backup ist wie immer 6MB groß. -
@thomas-braun
Hallo Thomas,
Deine Nachricht kam leider zu spät,
Es läuft die Wiederherstellung.
Bin echt gespannt.
Ist gerade beendet.[DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object 0_userdata.0: {"command":{"name":"del","args":["cfg.o.0_userdata.0"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object alias.0: {"command":{"name":"del","args":["cfg.o.alias.0"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object enum.functions: {"command":{"name":"del","args":["cfg.o.enum.functions"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object enum.rooms: {"command":{"name":"del","args":["cfg.o.enum.rooms"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object system.repositories: {"command":{"name":"del","args":["cfg.o.system.repositories"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletableDiese Fehler gibt es. sind aber wohl nicht problematisch.
GBis jetzt ist noch kein Adapter gestartet, obwohl ich "alle Adapter starten" angehakt habe -
@thomas-braun
Hallo Thomas,
Deine Nachricht kam leider zu spät,
Es läuft die Wiederherstellung.
Bin echt gespannt.
Ist gerade beendet.[DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object 0_userdata.0: {"command":{"name":"del","args":["cfg.o.0_userdata.0"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object alias.0: {"command":{"name":"del","args":["cfg.o.alias.0"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object enum.functions: {"command":{"name":"del","args":["cfg.o.enum.functions"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object enum.rooms: {"command":{"name":"del","args":["cfg.o.enum.rooms"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletable [ERROR] [iobroker] [Not critical] Cannot delete object system.repositories: {"command":{"name":"del","args":["cfg.o.system.repositories"]}} [DEBUG] [iobroker] Server Objects 127.0.0.1:56744 Error from InMemDB: Error: Object is marked as non deletableDiese Fehler gibt es. sind aber wohl nicht problematisch.
GBis jetzt ist noch kein Adapter gestartet, obwohl ich "alle Adapter starten" angehakt habe@altersrentner
Das log file kann man ja immer mal im Auge behalten. Mach ich bei mir auch, wenn ich am System herumschraube. -
@altersrentner
Das log file kann man ja immer mal im Auge behalten. Mach ich bei mir auch, wenn ich am System herumschraube.@thomas-braun
Etwas ist schief gelaufen.host.raspberrypi 2021-03-06 19:03:23.189 info iobroker npm-install: gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js: host.raspberrypi 2021-03-06 19:03:23.180 info iobroker npm-install: make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Error 1 host.raspberrypi 2021-03-06 19:03:22.966 info iobroker npm-install: In file included from ../../nan/nan.h:56, from ../authenticate_pam.cc:23:../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope NODE_MODULE(a host.raspberrypi 2021-03-06 19:03:22.960 info iobroker npm-install: ../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’ void init(Handle<Object> exports) { ^~~~~~ rand_r../authenticate_pam.cc:170:24: error: ex host.raspberrypi 2021-03-06 19:03:22.954 info iobroker npm-install: In file included from /home/iobroker/.cache/node-gyp/12.21.0/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.21.0/include/node/v8.h:27, host.raspberrypi 2021-03-06 19:03:22.947 info iobroker npm-install: ^~~~~~~~~~~~../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Fun host.raspberrypi 2021-03-06 19:03:22.944 info iobroker npm-install: ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object> host.raspberrypi 2021-03-06 18:03:05.769 info iobroker npm-install: npm install iobroker.vis-metro@1.1.2 --loglevel error --prefix "/opt/iobroker" (System call) host.raspberrypi 2021-03-06 18:03:05.767 info iobroker npm-install: NPM version: 6.14.11 host.raspberrypi 2021-03-06 18:03:02.422 info iobroker install vis-metro@1.1.2 using installedFrom host.raspberrypi 2021-03-06 18:03:02.421 warn startInstance cannot find adapter "vis-metro@1.1.2". Try to install it... 1 attempt host.raspberrypi 2021-03-06 18:03:01.287 info iobroker npm-install: exit 0 host.raspberrypi 2021-03-06 18:03:00.218 info iobroker npm-install: Update "system.adapter.vis-materialdesign.0" host.raspberrypi 2021-03-06 18:03:00.132 info iobroker npm-install: host.raspberrypi object system.adapter.vis-materialdesign created/updated host.raspberrypi 2021-03-06 18:02:59.850 info iobroker npm-install: INFO: Directory "/opt/iobroker/node_modules/iobroker.vis-materialdesign/www" was not found! Nothing was uploaded or deleted. host.raspberrypi 2021-03-06 18:02:59.792 info iobroker npm-install: upload [0] vis-materialdesign.admin /opt/iobroker/node_modules/iobroker.vis-materialdesign/admin/vis-materialdesign.png vis-materialdesign.png image/png host.raspberrypi 2021-03-06 18:02:59.734 info iobroker npm-install: upload [1] vis-materialdesign.admin /opt/iobroker/node_modules/iobroker.vis-materialdesign/admin/vis-materialdesign_16_9.png vis-materialdesign_16_9.png image/png host.raspberrypi 2021-03-06 18:02:59.600 info iobroker npm-install: upload [2] vis-materialdesign.admin /opt/iobroker/node_modules/iobroker.vis-materialdesign/admin/words.js words.js application/javascript host.raspberrypi 2021-03-06 18:02:59.579 info iobroker npm-install: host.raspberrypi install adapter vis-materialdesign@0.3.19 host.raspberrypi 2021-03-06 18:02:55.539 info iobroker npm-install: gyp ERR! System Linux 5.4.83-v7l+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modu host.raspberrypi 2021-03-06 18:02:55.537 info iobroker npm-install: gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)gyp ERR! stac host.raspberrypi 2021-03-06 18:02:55.535 info iobroker npm-install: gyp ERR! build error host.raspberrypi 2021-03-06 18:02:55.532 info iobroker npm-install: make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Error 1 host.raspberrypi 2021-03-06 18:02:55.322 info iobroker npm-install: NODE_MODULE(authenticate_pam, init); ^~~~/home/iobroker/.cache/node-gyp/12.21.0/include/node/node.h:737:36: note: in definition of macro ‘NODE_MOD host.raspberrypi 2021-03-06 18:02:55.320 info iobroker npm-install: ../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’ host.raspberrypi 2021-03-06 18:02:55.318 info iobroker npm-install: from ../authenticate_pam.cc:23:../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope NODE_MODULE(authenticate_pam, init); host.raspberrypi 2021-03-06 18:02:55.317 info iobroker npm-install: In file included from ../../nan/nan.h:56, host.raspberrypi 2021-03-06 18:02:55.313 info iobroker npm-install: ../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’ void init(Handle<Object> exports) { ^~~~~~ rand_r../authenticate_pam.cc:170:24: error: e host.raspberrypi 2021-03-06 18:02:55.310 info iobroker npm-install: Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); ^ host.raspberrypi 2021-03-06 18:02:55.300 info iobroker npm-install: ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object host.raspberrypi 2021-03-06 18:02:34.812 info iobroker npm-install: npm install iobroker.vis-materialdesign@0.3.19 --loglevel error --prefix "/opt/iobroker" (System call) host.raspberrypi 2021-03-06 18:02:34.809 info iobroker npm-install: NPM version: 6.14.11 host.raspberrypi 2021-03-06 18:02:32.000 info iobroker install vis-materialdesign@0.3.19 using installedFrom host.raspberrypi 2021-03-06 18:02:31.998 warn startInstance cannot find adapter "vis-materialdesign@0.3.19". Try to install it... 1 attempt host.raspberrypi 2021-03-06 18:02:30.994 info iobroker npm-install: exit 0Es werden keine Adapter gefunden
-
@thomas-braun
Etwas ist schief gelaufen.host.raspberrypi 2021-03-06 19:03:23.189 info iobroker npm-install: gyp ERR! build error gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js: host.raspberrypi 2021-03-06 19:03:23.180 info iobroker npm-install: make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Error 1 host.raspberrypi 2021-03-06 19:03:22.966 info iobroker npm-install: In file included from ../../nan/nan.h:56, from ../authenticate_pam.cc:23:../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope NODE_MODULE(a host.raspberrypi 2021-03-06 19:03:22.960 info iobroker npm-install: ../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’ void init(Handle<Object> exports) { ^~~~~~ rand_r../authenticate_pam.cc:170:24: error: ex host.raspberrypi 2021-03-06 19:03:22.954 info iobroker npm-install: In file included from /home/iobroker/.cache/node-gyp/12.21.0/include/node/v8-internal.h:14, from /home/iobroker/.cache/node-gyp/12.21.0/include/node/v8.h:27, host.raspberrypi 2021-03-06 19:03:22.947 info iobroker npm-install: ^~~~~~~~~~~~../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object>, v8::Local<v8::Fun host.raspberrypi 2021-03-06 19:03:22.944 info iobroker npm-install: ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object> host.raspberrypi 2021-03-06 18:03:05.769 info iobroker npm-install: npm install iobroker.vis-metro@1.1.2 --loglevel error --prefix "/opt/iobroker" (System call) host.raspberrypi 2021-03-06 18:03:05.767 info iobroker npm-install: NPM version: 6.14.11 host.raspberrypi 2021-03-06 18:03:02.422 info iobroker install vis-metro@1.1.2 using installedFrom host.raspberrypi 2021-03-06 18:03:02.421 warn startInstance cannot find adapter "vis-metro@1.1.2". Try to install it... 1 attempt host.raspberrypi 2021-03-06 18:03:01.287 info iobroker npm-install: exit 0 host.raspberrypi 2021-03-06 18:03:00.218 info iobroker npm-install: Update "system.adapter.vis-materialdesign.0" host.raspberrypi 2021-03-06 18:03:00.132 info iobroker npm-install: host.raspberrypi object system.adapter.vis-materialdesign created/updated host.raspberrypi 2021-03-06 18:02:59.850 info iobroker npm-install: INFO: Directory "/opt/iobroker/node_modules/iobroker.vis-materialdesign/www" was not found! Nothing was uploaded or deleted. host.raspberrypi 2021-03-06 18:02:59.792 info iobroker npm-install: upload [0] vis-materialdesign.admin /opt/iobroker/node_modules/iobroker.vis-materialdesign/admin/vis-materialdesign.png vis-materialdesign.png image/png host.raspberrypi 2021-03-06 18:02:59.734 info iobroker npm-install: upload [1] vis-materialdesign.admin /opt/iobroker/node_modules/iobroker.vis-materialdesign/admin/vis-materialdesign_16_9.png vis-materialdesign_16_9.png image/png host.raspberrypi 2021-03-06 18:02:59.600 info iobroker npm-install: upload [2] vis-materialdesign.admin /opt/iobroker/node_modules/iobroker.vis-materialdesign/admin/words.js words.js application/javascript host.raspberrypi 2021-03-06 18:02:59.579 info iobroker npm-install: host.raspberrypi install adapter vis-materialdesign@0.3.19 host.raspberrypi 2021-03-06 18:02:55.539 info iobroker npm-install: gyp ERR! System Linux 5.4.83-v7l+gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"gyp ERR! cwd /opt/iobroker/node_modu host.raspberrypi 2021-03-06 18:02:55.537 info iobroker npm-install: gyp ERR! stack Error: `make` failed with exit code: 2gyp ERR! stack at ChildProcess.onExit (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:194:23)gyp ERR! stac host.raspberrypi 2021-03-06 18:02:55.535 info iobroker npm-install: gyp ERR! build error host.raspberrypi 2021-03-06 18:02:55.532 info iobroker npm-install: make: *** [authenticate_pam.target.mk:109: Release/obj.target/authenticate_pam/authenticate_pam.o] Error 1 host.raspberrypi 2021-03-06 18:02:55.322 info iobroker npm-install: NODE_MODULE(authenticate_pam, init); ^~~~/home/iobroker/.cache/node-gyp/12.21.0/include/node/node.h:737:36: note: in definition of macro ‘NODE_MOD host.raspberrypi 2021-03-06 18:02:55.320 info iobroker npm-install: ../authenticate_pam.cc:175:31: note: suggested alternative: ‘int’ host.raspberrypi 2021-03-06 18:02:55.318 info iobroker npm-install: from ../authenticate_pam.cc:23:../authenticate_pam.cc:175:31: error: ‘init’ was not declared in this scope NODE_MODULE(authenticate_pam, init); host.raspberrypi 2021-03-06 18:02:55.317 info iobroker npm-install: In file included from ../../nan/nan.h:56, host.raspberrypi 2021-03-06 18:02:55.313 info iobroker npm-install: ../authenticate_pam.cc:170:11: note: suggested alternative: ‘rand_r’ void init(Handle<Object> exports) { ^~~~~~ rand_r../authenticate_pam.cc:170:24: error: e host.raspberrypi 2021-03-06 18:02:55.310 info iobroker npm-install: Nan::MakeCallback(Nan::GetCurrentContext()->Global(), Nan::New(m->callback), 1, args); ^ host.raspberrypi 2021-03-06 18:02:55.300 info iobroker npm-install: ../authenticate_pam.cc: In function ‘void after_doing_auth(uv_work_t*, int)’:../authenticate_pam.cc:107:87: warning: ‘v8::Local<v8::Value> Nan::MakeCallback(v8::Local<v8::Object host.raspberrypi 2021-03-06 18:02:34.812 info iobroker npm-install: npm install iobroker.vis-materialdesign@0.3.19 --loglevel error --prefix "/opt/iobroker" (System call) host.raspberrypi 2021-03-06 18:02:34.809 info iobroker npm-install: NPM version: 6.14.11 host.raspberrypi 2021-03-06 18:02:32.000 info iobroker install vis-materialdesign@0.3.19 using installedFrom host.raspberrypi 2021-03-06 18:02:31.998 warn startInstance cannot find adapter "vis-materialdesign@0.3.19". Try to install it... 1 attempt host.raspberrypi 2021-03-06 18:02:30.994 info iobroker npm-install: exit 0Es werden keine Adapter gefunden
Wenn da ganz sicher über mehrere Minuten absolute Ruhe in der Konsole herrscht:
iobroker list adapters iobroker list instances -
Wenn da ganz sicher über mehrere Minuten absolute Ruhe in der Konsole herrscht:
iobroker list adapters iobroker list instancespi@raspberrypi:~ $ iobroker list adapters system.adapter.admin : admin - v4.2.1 system.adapter.alexa2 : alexa2 - v3.8.1 system.adapter.backitup : backitup - v2.0.1 system.adapter.ble : ble - v0.12.0 system.adapter.cloud : cloud - v4.0.10 system.adapter.cul : cul - v1.3.4 system.adapter.daswetter : daswetter - v3.0.4 system.adapter.discovery : discovery - v2.6.1 system.adapter.dwd : dwd - v2.7.5 system.adapter.fakeroku : fakeroku - v0.2.1 system.adapter.feiertage : feiertage - v1.0.19 system.adapter.fhem : fhem - v1.5.3 system.adapter.flot : flot - v1.10.6 system.adapter.harmony : harmony - v1.2.2 system.adapter.history : history - v1.9.10 system.adapter.hm-rega : hm-rega - v3.0.16 system.adapter.hm-rpc : hm-rpc - v1.14.35 system.adapter.hmm : hmm - v1.0.1 system.adapter.ical : ical - v1.9.1 system.adapter.icons-icons8 : icons-icons8 - v0.0.1 system.adapter.icons-mfd-png : icons-mfd-png - v1.0.2 system.adapter.icons-open-icon-library-png: icons-open-icon-library-png - v0.1.3 system.adapter.influxdb : influxdb - v1.9.4 system.adapter.info : info - v1.7.15 system.adapter.iot : iot - v1.8.13 system.adapter.jarvis : jarvis - v2.2.0 system.adapter.javascript : javascript - v5.0.7 system.adapter.js2fs : js2fs - v0.1.5 system.adapter.mihome : mihome - v1.3.7 system.adapter.mihome-plug : mihome-plug - v0.2.0 system.adapter.mihome-vacuum : mihome-vacuum - v1.1.5 system.adapter.mobile : mobile - v0.5.0 system.adapter.ping : ping - v1.3.2 system.adapter.pushover : pushover - v2.0.3 system.adapter.rpi2 : rpi2 - v1.2.0 system.adapter.samsung : samsung - v0.2.9 system.adapter.scenes : scenes - v2.3.6 system.adapter.shelly : shelly - v4.0.7-beta-1 system.adapter.shuttercontrol : shuttercontrol - v1.1.5 system.adapter.simple-api : simple-api - v2.5.3 system.adapter.socketio : socketio - v3.1.4 system.adapter.tankerkoenig : tankerkoenig - v2.0.10 system.adapter.telegram : telegram - v1.8.0 system.adapter.terminal : terminal - v0.1.2 system.adapter.text2command : text2command - v2.0.7 system.adapter.tr-064-community : tr-064-community - v1.0.0 system.adapter.trashschedule : trashschedule - v1.1.1 system.adapter.vis : vis - v1.3.7 system.adapter.vis-fancyswitch : vis-fancyswitch - v1.1.0 system.adapter.vis-hqwidgets : vis-hqwidgets - v1.1.7 system.adapter.vis-material-webfont : vis-material-webfont - v0.0.3 system.adapter.vis-materialdesign : vis-materialdesign - v0.3.19 system.adapter.vis-metro : vis-metro - v1.1.2 system.adapter.vis-plumb : vis-plumb - v1.0.2 system.adapter.vis-timeandweather : vis-timeandweather - v1.1.7 system.adapter.vis-weather : vis-weather - v2.5.2 system.adapter.weatherunderground : weatherunderground - v3.1.3 system.adapter.web : web - v3.3.0 system.adapter.yr : yr - v2.0.3 system.adapter.zigbee : zigbee - v1.4.4 pi@raspberrypi:~ $ iobroker list instances + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.cul.0 : cul : raspberrypi - enabled, port: 23 system.adapter.daswetter.0 : daswetter : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled system.adapter.feiertage.0 : feiertage : raspberrypi - enabled + system.adapter.fhem.0 : fhem : raspberrypi - enabled, port: 7072 system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.harmony.0 : harmony : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome.0 : mihome : raspberrypi - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.samsung.0 : samsung : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8090, bind: 0.0.0.0, run as: admin + system.adapter.text2command.0 : text2command : raspberrypi - enabled system.adapter.tr-064-community.0 : tr-064-community : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : raspberrypi - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8083, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0012013B01-if00 + instance is aliveHabe die Adapter jetzt per Hand gestartet.
Wie schon gedacht, Influx startet nicht. -
pi@raspberrypi:~ $ iobroker list adapters system.adapter.admin : admin - v4.2.1 system.adapter.alexa2 : alexa2 - v3.8.1 system.adapter.backitup : backitup - v2.0.1 system.adapter.ble : ble - v0.12.0 system.adapter.cloud : cloud - v4.0.10 system.adapter.cul : cul - v1.3.4 system.adapter.daswetter : daswetter - v3.0.4 system.adapter.discovery : discovery - v2.6.1 system.adapter.dwd : dwd - v2.7.5 system.adapter.fakeroku : fakeroku - v0.2.1 system.adapter.feiertage : feiertage - v1.0.19 system.adapter.fhem : fhem - v1.5.3 system.adapter.flot : flot - v1.10.6 system.adapter.harmony : harmony - v1.2.2 system.adapter.history : history - v1.9.10 system.adapter.hm-rega : hm-rega - v3.0.16 system.adapter.hm-rpc : hm-rpc - v1.14.35 system.adapter.hmm : hmm - v1.0.1 system.adapter.ical : ical - v1.9.1 system.adapter.icons-icons8 : icons-icons8 - v0.0.1 system.adapter.icons-mfd-png : icons-mfd-png - v1.0.2 system.adapter.icons-open-icon-library-png: icons-open-icon-library-png - v0.1.3 system.adapter.influxdb : influxdb - v1.9.4 system.adapter.info : info - v1.7.15 system.adapter.iot : iot - v1.8.13 system.adapter.jarvis : jarvis - v2.2.0 system.adapter.javascript : javascript - v5.0.7 system.adapter.js2fs : js2fs - v0.1.5 system.adapter.mihome : mihome - v1.3.7 system.adapter.mihome-plug : mihome-plug - v0.2.0 system.adapter.mihome-vacuum : mihome-vacuum - v1.1.5 system.adapter.mobile : mobile - v0.5.0 system.adapter.ping : ping - v1.3.2 system.adapter.pushover : pushover - v2.0.3 system.adapter.rpi2 : rpi2 - v1.2.0 system.adapter.samsung : samsung - v0.2.9 system.adapter.scenes : scenes - v2.3.6 system.adapter.shelly : shelly - v4.0.7-beta-1 system.adapter.shuttercontrol : shuttercontrol - v1.1.5 system.adapter.simple-api : simple-api - v2.5.3 system.adapter.socketio : socketio - v3.1.4 system.adapter.tankerkoenig : tankerkoenig - v2.0.10 system.adapter.telegram : telegram - v1.8.0 system.adapter.terminal : terminal - v0.1.2 system.adapter.text2command : text2command - v2.0.7 system.adapter.tr-064-community : tr-064-community - v1.0.0 system.adapter.trashschedule : trashschedule - v1.1.1 system.adapter.vis : vis - v1.3.7 system.adapter.vis-fancyswitch : vis-fancyswitch - v1.1.0 system.adapter.vis-hqwidgets : vis-hqwidgets - v1.1.7 system.adapter.vis-material-webfont : vis-material-webfont - v0.0.3 system.adapter.vis-materialdesign : vis-materialdesign - v0.3.19 system.adapter.vis-metro : vis-metro - v1.1.2 system.adapter.vis-plumb : vis-plumb - v1.0.2 system.adapter.vis-timeandweather : vis-timeandweather - v1.1.7 system.adapter.vis-weather : vis-weather - v2.5.2 system.adapter.weatherunderground : weatherunderground - v3.1.3 system.adapter.web : web - v3.3.0 system.adapter.yr : yr - v2.0.3 system.adapter.zigbee : zigbee - v1.4.4 pi@raspberrypi:~ $ iobroker list instances + system.adapter.admin.0 : admin : raspberrypi - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.alexa2.0 : alexa2 : raspberrypi - enabled + system.adapter.backitup.0 : backitup : raspberrypi - enabled + system.adapter.cloud.0 : cloud : raspberrypi - enabled + system.adapter.cul.0 : cul : raspberrypi - enabled, port: 23 system.adapter.daswetter.0 : daswetter : raspberrypi - enabled system.adapter.dwd.0 : dwd : raspberrypi - enabled system.adapter.feiertage.0 : feiertage : raspberrypi - enabled + system.adapter.fhem.0 : fhem : raspberrypi - enabled, port: 7072 system.adapter.flot.0 : flot : raspberrypi - disabled + system.adapter.harmony.0 : harmony : raspberrypi - enabled + system.adapter.history.0 : history : raspberrypi - enabled + system.adapter.hm-rega.0 : hm-rega : raspberrypi - enabled + system.adapter.hm-rpc.0 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : raspberrypi - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : raspberrypi - enabled, port: 0 system.adapter.ical.0 : ical : raspberrypi - enabled system.adapter.icons-icons8.0 : icons-icons8 : raspberrypi - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : raspberrypi - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: raspberrypi - disabled + system.adapter.influxdb.0 : influxdb : raspberrypi - enabled, port: 8086 + system.adapter.iot.0 : iot : raspberrypi - enabled + system.adapter.jarvis.0 : jarvis : raspberrypi - enabled + system.adapter.javascript.0 : javascript : raspberrypi - enabled + system.adapter.mihome-vacuum.0 : mihome-vacuum : raspberrypi - enabled, port: 54321 + system.adapter.mihome.0 : mihome : raspberrypi - enabled, port: 9898, bind: 0.0.0.0 + system.adapter.rpi2.0 : rpi2 : raspberrypi - enabled + system.adapter.samsung.0 : samsung : raspberrypi - enabled + system.adapter.scenes.0 : scenes : raspberrypi - enabled + system.adapter.shelly.0 : shelly : raspberrypi - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.shuttercontrol.0 : shuttercontrol : raspberrypi - enabled + system.adapter.socketio.0 : socketio : raspberrypi - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.tankerkoenig.0 : tankerkoenig : raspberrypi - enabled + system.adapter.telegram.0 : telegram : raspberrypi - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.terminal.0 : terminal : raspberrypi - enabled, port: 8090, bind: 0.0.0.0, run as: admin + system.adapter.text2command.0 : text2command : raspberrypi - enabled system.adapter.tr-064-community.0 : tr-064-community : raspberrypi - enabled + system.adapter.trashschedule.0 : trashschedule : raspberrypi - enabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : raspberrypi - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : raspberrypi - disabled system.adapter.vis-material-webfont.0 : vis-material-webfont : raspberrypi - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : raspberrypi - disabled system.adapter.vis-metro.0 : vis-metro : raspberrypi - disabled system.adapter.vis-plumb.0 : vis-plumb : raspberrypi - disabled system.adapter.vis-timeandweather.0 : vis-timeandweather : raspberrypi - disabled system.adapter.vis-weather.0 : vis-weather : raspberrypi - disabled system.adapter.vis.0 : vis : raspberrypi - enabled + system.adapter.web.0 : web : raspberrypi - enabled, port: 8083, bind: 0.0.0.0, run as: admin system.adapter.yr.0 : yr : raspberrypi - enabled + system.adapter.zigbee.0 : zigbee : raspberrypi - enabled, port: /dev/serial/by-id/usb-Texas_Instruments_TI_CC2531_USB_CDC___0X00124B0012013B01-if00 + instance is aliveHabe die Adapter jetzt per Hand gestartet.
Wie schon gedacht, Influx startet nicht.@altersrentner
Passt doch soweit.
Zu influxdb kann ich nix sagen. -
@altersrentner
Passt doch soweit.
Zu influxdb kann ich nix sagen.@thomas-braun
Danke,
Die blaue LED am USB Adapter der SSD blinkt ständig,
und am Pi die grüne. ist das normal?
MfG Michael
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden507
Online32.7k
Benutzer82.6k
Themen1.3m
Beiträge