deCONZ Installation schlägt fehl
-
dmesg -
@thomas-braun said in deCONZ Installation schlägt fehl:
dmesg
pi@raspberrypi4-iob:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 5.10.11-v7l+ (dom@buildbot) (arm-linux-gnueabihf-gc c-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1399 SMP Thu Jan 28 12:09:48 GMT 2021 [ 0.000000] CPU: ARMv7 Processor [410fd083] revision 3 (ARMv7), cr=30c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 4 Model B Rev 1.4 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x000000001ec00000, s ize 256 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id share d-dma-pool [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x000000002fffffff] [ 0.000000] Normal empty [ 0.000000] HighMem [mem 0x0000000030000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b2fffff] [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000fbffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x00000001ffffffff] [ 0.000000] On node 0 totalpages: 2061056 [ 0.000000] DMA zone: 2304 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 196608 pages, LIFO batch:63 [ 0.000000] HighMem zone: 1864448 pages, LIFO batch:63 [ 0.000000] percpu: Embedded 20 pages/cpu s50636 r8192 d23092 u81920 [ 0.000000] pcpu-alloc: s50636 r8192 d23092 u81920 alloc=20*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2058752 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835 .enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 video=HDMI-A-1:1280x1024M@60 sms c95xx.macaddr=DC:A6:32:DA:B5:81 vc_mem.mem_base=0x3eb00000 vc_mem.mem_size=0x3ff 00000 console=tty1 root=PARTUUID=75ee2711-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles [ 0.000000] Kernel parameter elevator= does not have any effect anymore. Please use sysfs to set IO scheduler for individual devices. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, li near) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] software IO TLB: mapped [mem 0x0000000014c00000-0x0000000018c0000 0] (64MB) [ 0.000000] Memory: 7799072K/8244224K available (10240K kernel code, 1354K rw data, 3152K rodata, 2048K init, 890K bss, 183008K reserved, 262144K cma-reserved , 7457792K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 33824 entries in 67 pages [ 0.000000] ftrace: allocated 67 pages with 3 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jif fies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] random: get_random_bytes called from start_kernel+0x3c8/0x59c wit h crng_init=0 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2 147483647500ns [ 0.000027] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_ idle_ns: 1911260446275 ns [ 0.000087] bcm2835: system timer (irq = 25) [ 0.000728] arch_timer: cp15 timer(s) running at 54.00MHz (phys). [ 0.000746] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns [ 0.000764] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 43980 46511102ns [ 0.000779] Switching to timer-based delay loop, resolution 18ns [ 0.001025] Console: colour dummy device 80x30 [ 0.001092] printk: console [tty1] enabled [ 0.001148] Calibrating delay loop (skipped), value calculated using timer fr equency.. 108.00 BogoMIPS (lpj=540000) [ 0.001179] pid_max: default: 32768 minimum: 301 [ 0.001343] LSM: Security Framework initializing [ 0.001521] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linea r) [ 0.001546] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.003101] Disabling memory control group subsystem [ 0.003218] CPU: Testing write buffer coherency: ok [ 0.003669] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.004865] Setting up static identity map for 0x200000 - 0x20003c [ 0.005061] rcu: Hierarchical SRCU implementation. [ 0.005973] smp: Bringing up secondary CPUs ... [ 0.007157] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.008502] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.009771] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.009928] smp: Brought up 1 node, 4 CPUs [ 0.009949] SMP: Total of 4 processors activated (432.00 BogoMIPS). [ 0.009964] CPU: All CPU(s) started in HYP mode. [ 0.009978] CPU: Virtualization extensions available. [ 0.010857] devtmpfs: initialized [ 0.024778] VFP support v0.3: implementor 41 architecture 3 part 40 variant 8 rev 0 [ 0.024993] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns [ 0.025023] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.031724] pinctrl core: initialized pinctrl subsystem [ 0.032774] NET: Registered protocol family 16 [ 0.036594] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.037367] audit: initializing netlink subsys (disabled) [ 0.037624] audit: type=2000 audit(0.030:1): state=initialized audit_enabled= 0 res=1 [ 0.038189] thermal_sys: Registered thermal governor 'step_wise' [ 0.038937] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.038955] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.039334] Serial: AMBA PL011 UART driver [ 0.072138] bcm2835-mbox fe00b880.mailbox: mailbox enabled [ 0.090835] raspberrypi-firmware soc:firmware: Attached to firmware from 2021 -01-27T22:19:57, variant start [ 0.100848] raspberrypi-firmware soc:firmware: Firmware hash is 99d9a48302e45 53cff3688692bb7e9ac760a03fa [ 0.145821] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1 [ 0.149944] vgaarb: loaded [ 0.150397] SCSI subsystem initialized [ 0.150621] usbcore: registered new interface driver usbfs [ 0.150680] usbcore: registered new interface driver hub [ 0.150751] usbcore: registered new device driver usb [ 0.151454] usb_phy_generic phy: supply vcc not found, using dummy regulator [ 0.153372] clocksource: Switched to clocksource arch_sys_counter [ 1.180688] VFS: Disk quotas dquot_6.6.0 [ 1.180790] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 1.180973] FS-Cache: Loaded [ 1.181159] CacheFiles: Loaded [ 1.182157] simple-framebuffer 3e5f6000.framebuffer: framebuffer at 0x3e5f600 0, 0x500000 bytes, mapped to 0x(ptrval) [ 1.182178] simple-framebuffer 3e5f6000.framebuffer: format=a8r8g8b8, mode=12 80x1024x32, linelength=5120 [ 1.182637] Console: switching to colour frame buffer device 160x64 [ 1.189032] simple-framebuffer 3e5f6000.framebuffer: fb0: simplefb registered ! [ 1.198934] NET: Registered protocol family 2 [ 1.199815] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear) [ 1.199868] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 1.200023] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 1.200091] TCP: Hash tables configured (established 8192 bind 8192) [ 1.200238] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.200272] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 1.200520] NET: Registered protocol family 1 [ 1.201248] RPC: Registered named UNIX socket transport module. [ 1.201264] RPC: Registered udp transport module. [ 1.201280] RPC: Registered tcp transport module. [ 1.201294] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.201318] PCI: CLS 0 bytes, default 64 [ 1.204309] Initialise system trusted keyrings [ 1.204570] workingset: timestamp_bits=14 max_order=21 bucket_order=7 [ 1.212765] zbud: loaded [ 1.214764] FS-Cache: Netfs 'nfs' registered for caching [ 1.215534] NFS: Registering the id_resolver key type [ 1.215580] Key type id_resolver registered [ 1.215596] Key type id_legacy registered [ 1.215739] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 1.216784] Key type asymmetric registered [ 1.216801] Asymmetric key parser 'x509' registered [ 1.216994] bounce: pool size: 64 pages [ 1.217037] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 49) [ 1.217245] io scheduler mq-deadline registered [ 1.217261] io scheduler kyber registered [ 1.221522] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges: [ 1.221553] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500 000, using [bus 00-ff] [ 1.221632] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0 x00c0000000 [ 1.221720] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x00bfffffff -> 0 x0400000000 [ 1.305478] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC) [ 1.305839] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00 [ 1.305859] pci_bus 0000:00: root bus resource [bus 00-ff] [ 1.305883] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff]) [ 1.305982] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400 [ 1.306222] pci 0000:00:00.0: PME# supported from D0 D3hot [ 1.309649] PCI: bus0: Fast back to back transfers disabled [ 1.309901] pci 0000:01:00.0: [1106:3483] type 00 class 0x0c0330 [ 1.309973] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit] [ 1.310230] pci 0000:01:00.0: PME# supported from D0 D3hot [ 1.313560] PCI: bus1: Fast back to back transfers disabled [ 1.313656] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff] [ 1.313681] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600000fff 64 bit] [ 1.313724] pci 0000:00:00.0: PCI bridge to [bus 01] [ 1.313750] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff] [ 1.314151] pcieport 0000:00:00.0: enabling device (0140 -> 0142) [ 1.314378] pcieport 0000:00:00.0: PME: Signaling with IRQ 63 [ 1.320128] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled [ 1.321019] bcm2835-aux-uart fe215040.serial: there is not valid maps for sta te default [ 1.323495] iproc-rng200 fe104000.rng: hwrng registered [ 1.323814] vc-mem: phys_addr:0x00000000 mem_base=0x3eb00000 mem_size:0x3ff00 000(1023 MiB) [ 1.324703] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe2 00000 [ 1.337632] brd: module loaded [ 1.349640] loop: module loaded [ 1.351273] Loading iSCSI transport class v2.0-870. [ 1.353715] libphy: Fixed MDIO Bus: probed [ 1.355010] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000 [ 1.373409] libphy: bcmgenet MII bus: probed [ 1.453522] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus [ 1.454662] usbcore: registered new interface driver r8152 [ 1.454742] usbcore: registered new interface driver lan78xx [ 1.454802] usbcore: registered new interface driver smsc95xx [ 1.500896] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.500932] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 1 [ 1.504122] xhci_hcd 0000:01:00.0: hcc params 0x002841eb hci version 0x100 qu irks 0x0000030000000890 [ 1.505426] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc dDevice= 5.10 [ 1.505446] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.505463] usb usb1: Product: xHCI Host Controller [ 1.505481] usb usb1: Manufacturer: Linux 5.10.11-v7l+ xhci-hcd [ 1.505497] usb usb1: SerialNumber: 0000:01:00.0 [ 1.506232] hub 1-0:1.0: USB hub found [ 1.506331] hub 1-0:1.0: 1 port detected [ 1.507006] xhci_hcd 0000:01:00.0: xHCI Host Controller [ 1.507034] xhci_hcd 0000:01:00.0: new USB bus registered, assigned bus numbe r 2 [ 1.507059] xhci_hcd 0000:01:00.0: Host supports USB 3.0 SuperSpeed [ 1.507523] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc dDevice= 5.10 [ 1.507541] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1 [ 1.507558] usb usb2: Product: xHCI Host Controller [ 1.507575] usb usb2: Manufacturer: Linux 5.10.11-v7l+ xhci-hcd [ 1.507591] usb usb2: SerialNumber: 0000:01:00.0 [ 1.508304] hub 2-0:1.0: USB hub found [ 1.508387] hub 2-0:1.0: 4 ports detected [ 1.510048] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 1.510368] dwc_otg: FIQ enabled [ 1.510382] dwc_otg: NAK holdoff enabled [ 1.510396] dwc_otg: FIQ split-transaction FSM enabled [ 1.510426] Module dwc_common_port init [ 1.510874] usbcore: registered new interface driver uas [ 1.510980] usbcore: registered new interface driver usb-storage [ 1.511178] mousedev: PS/2 mouse device common for all mice [ 1.512835] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 1.516426] sdhci: Secure Digital Host Controller Interface driver [ 1.516441] sdhci: Copyright(c) Pierre Ossman [ 1.517143] mmc-bcm2835 fe300000.mmcnr: could not get clk, deferring probe [ 1.517743] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.520520] ledtrig-cpu: registered to indicate activity on CPUs [ 1.520860] hid: raw HID events driver (C) Jiri Kosina [ 1.521046] usbcore: registered new interface driver usbhid [ 1.521061] usbhid: USB HID core driver [ 1.526342] Initializing XFRM netlink socket [ 1.526383] NET: Registered protocol family 17 [ 1.526508] Key type dns_resolver registered [ 1.526934] Registering SWP/SWPB emulation handler [ 1.527096] registered taskstats version 1 [ 1.527123] Loading compiled-in X.509 certificates [ 1.527945] Key type ._fscrypt registered [ 1.527961] Key type .fscrypt registered [ 1.527976] Key type fscrypt-provisioning registered [ 1.539367] uart-pl011 fe201000.serial: there is not valid maps for state def ault [ 1.539663] uart-pl011 fe201000.serial: cts_event_workaround enabled [ 1.539751] fe201000.serial: ttyAMA0 at MMIO 0xfe201000 (irq = 36, base_baud = 0) is a PL011 rev2 [ 1.546215] bcm2835-aux-uart fe215040.serial: there is not valid maps for sta te default [ 1.547049] fe215040.serial: ttyS0 at MMIO 0xfe215040 (irq = 37, base_baud = 62500000) is a 16550 [ 1.548025] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains drive r [ 1.549101] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 1.549118] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated [ 1.576997] of_cfs_init [ 1.577246] of_cfs_init: OK [ 1.594551] mmc1: queuing unknown CIS tuple 0x80 (2 bytes) [ 1.596212] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.597871] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.600840] mmc1: queuing unknown CIS tuple 0x80 (7 bytes) [ 1.602498] mmc1: queuing unknown CIS tuple 0x80 (3 bytes) [ 1.613378] mmc0: SDHCI controller on fe340000.emmc2 [fe340000.emmc2] using A DMA [ 1.614493] Waiting for root device PARTUUID=75ee2711-02... [ 1.644896] random: fast init done [ 1.669017] mmc1: new high speed SDIO card at address 0001 [ 1.873409] usb 1-1: new high-speed USB device number 2 using xhci_hcd [ 2.056033] usb 1-1: New USB device found, idVendor=2109, idProduct=3431, bcd Device= 4.21 [ 2.056053] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 2.056071] usb 1-1: Product: USB2.0 Hub [ 2.057818] hub 1-1:1.0: USB hub found [ 2.058136] hub 1-1:1.0: 4 ports detected [ 2.383406] usb 1-1.1: new low-speed USB device number 3 using xhci_hcd [ 2.521169] usb 1-1.1: New USB device found, idVendor=03f0, idProduct=354a, b cdDevice= 1.10 [ 2.521188] usb 1-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber =0 [ 2.521205] usb 1-1.1: Product: HP USB Slim Keyboard [ 2.530925] input: HP USB Slim Keyboard as /devices/platform/scb/fd500000.pci e/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03F0:354A.0 001/input/input0 [ 2.594059] hid-generic 0003:03F0:354A.0001: input,hidraw0: USB HID v1.10 Key board [HP USB Slim Keyboard] on usb-0000:01:00.0-1.1/input0 [ 2.602388] input: HP USB Slim Keyboard Consumer Control as /devices/platform /scb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1 /0003:03F0:354A.0002/input/input1 [ 2.663721] input: HP USB Slim Keyboard System Control as /devices/platform/s cb/fd500000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0 003:03F0:354A.0002/input/input2 [ 2.664025] input: HP USB Slim Keyboard as /devices/platform/scb/fd500000.pci e/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:03F0:354A.0 002/input/input3 [ 2.664518] hid-generic 0003:03F0:354A.0002: input,hiddev96,hidraw1: USB HID v1.10 Device [HP USB Slim Keyboard] on usb-0000:01:00.0-1.1/input1 [ 2.763407] usb 1-1.2: new low-speed USB device number 4 using xhci_hcd [ 2.901974] usb 1-1.2: New USB device found, idVendor=03f0, idProduct=094a, b cdDevice= 1.00 [ 2.901993] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber =0 [ 2.902010] usb 1-1.2: Product: HP USB Optical Mouse [ 2.902027] usb 1-1.2: Manufacturer: PixArt [ 2.911020] input: PixArt HP USB Optical Mouse as /devices/platform/scb/fd500 000.pcie/pci0000:00/0000:00:00.0/0000:01:00.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:03F0 :094A.0003/input/input4 [ 2.911481] hid-generic 0003:03F0:094A.0003: input,hidraw2: USB HID v1.11 Mou se [PixArt HP USB Optical Mouse] on usb-0000:01:00.0-1.2/input0 [ 3.003404] usb 1-1.3: new full-speed USB device number 5 using xhci_hcd [ 3.142508] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 3.142527] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 3.142544] usb 1-1.3: Product: ConBee II [ 3.142561] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 3.142577] usb 1-1.3: SerialNumber: DE2415113 [ 3.243403] usb 1-1.4: new high-speed USB device number 6 using xhci_hcd [ 3.454900] usb 1-1.4: New USB device found, idVendor=152d, idProduct=0578, b cdDevice=32.02 [ 3.454919] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 3.454936] usb 1-1.4: Product: External Disk 3.0 [ 3.454952] usb 1-1.4: Manufacturer: JMicron [ 3.454969] usb 1-1.4: SerialNumber: 3088E913307737 [ 3.461422] scsi host0: uas [ 3.462917] scsi 0:0:0:0: Direct-Access JMicron Tech 3202 PQ : 0 ANSI: 6 [ 3.465621] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59. 6 GiB) [ 3.465641] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 3.465910] sd 0:0:0:0: [sda] Write Protect is off [ 3.465930] sd 0:0:0:0: [sda] Mode Sense: 5f 00 00 08 [ 3.466454] sd 0:0:0:0: [sda] Disabling FUA [ 3.466475] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA [ 3.466940] sd 0:0:0:0: [sda] Optimal transfer size 33553920 bytes not a mult iple of physical block size (4096 bytes) [ 3.470156] sda: sda1 sda2 [ 3.473685] sd 0:0:0:0: [sda] Attached SCSI disk [ 3.501303] EXT4-fs (sda2): INFO: recovery required on readonly filesystem [ 3.501321] EXT4-fs (sda2): write access will be enabled during recovery [ 4.902045] EXT4-fs (sda2): orphan cleanup on readonly fs [ 4.903780] EXT4-fs (sda2): 11 orphan inodes deleted [ 4.903797] EXT4-fs (sda2): recovery complete [ 4.926287] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null) [ 4.926383] VFS: Mounted root (ext4 filesystem) readonly on device 8:2. [ 4.926977] devtmpfs: mounted [ 4.935880] Freeing unused kernel memory: 2048K [ 4.953743] Run /sbin/init as init process [ 4.953758] with arguments: [ 4.953773] /sbin/init [ 4.953787] splash [ 4.953801] with environment: [ 4.953815] HOME=/ [ 4.953829] TERM=linux [ 5.215533] random: crng init done [ 5.416830] systemd[1]: System time before build time, advancing clock. [ 5.533483] NET: Registered protocol family 10 [ 5.534816] Segment Routing with IPv6 [ 5.596048] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybr id) [ 5.596809] systemd[1]: Detected architecture arm. [ 5.674338] systemd[1]: Set hostname to <raspberrypi4-iob>. [ 6.358399] systemd[1]: /lib/systemd/system/deconz-gui.service:10: Unknown lv alue 'StartLimitIntervalSec' in section 'Service', ignoring [ 6.441068] systemd[1]: Listening on Journal Socket. [ 6.448608] systemd[1]: Mounting RPC Pipe File System... [ 6.455705] systemd[1]: Mounting Kernel Debug File System... [ 6.457696] systemd[1]: Created slice User and Session Slice. [ 6.464647] systemd[1]: Starting Set the console keyboard layout... [ 6.466225] systemd[1]: Listening on Journal Socket (/dev/log). [ 6.632816] i2c /dev entries driver [ 7.084717] EXT4-fs (sda2): re-mounted. Opts: (null) [ 7.195642] systemd-journald[115]: Received request to flush runtime journal from PID 1 [ 7.801494] rpivid-mem feb00000.hevc-decoder: rpivid-hevcmem initialised: Reg isters at 0xfeb00000 length 0x00010000 [ 7.803520] rpivid-mem feb10000.rpivid-local-intc: rpivid-intcmem initialised : Registers at 0xfeb10000 length 0x00001000 [ 7.804116] rpivid-mem feb20000.h264-decoder: rpivid-h264mem initialised: Reg isters at 0xfeb20000 length 0x00010000 [ 7.804661] rpivid-mem feb30000.vp9-decoder: rpivid-vp9mem initialised: Regis ters at 0xfeb30000 length 0x00010000 [ 7.890986] vc_sm_cma: module is from the staging directory, the quality is u nknown, you have been warned. [ 7.893059] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 7.893085] [vc_sm_connected_init]: start [ 7.907079] mc: Linux media interface: v0.10 [ 7.909838] [vc_sm_connected_init]: installed successfully [ 7.969741] videodev: Linux video capture interface: v2.00 [ 8.004119] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 8.010972] bcm2835_mmal_vchiq: module is from the staging directory, the qua lity is unknown, you have been warned. [ 8.014193] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 8.017397] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 8.022515] bcm2835_v4l2: module is from the staging directory, the quality i s unknown, you have been warned. [ 8.052454] bcm2835_audio bcm2835_audio: card created with 4 channels [ 8.060263] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 8.065476] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 8.065527] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 8.067253] bcm2835_audio bcm2835_audio: card created with 4 channels [ 8.082699] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev /video13 [ 8.083079] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /de v/video14 [ 8.083490] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /de v/video15 [ 8.083800] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/ video16 [ 8.083830] bcm2835-isp bcm2835-isp: Register output node 0 with media contro ller [ 8.083861] bcm2835-isp bcm2835-isp: Register capture node 1 with media contr oller [ 8.083884] bcm2835-isp bcm2835-isp: Register capture node 2 with media contr oller [ 8.083907] bcm2835-isp bcm2835-isp: Register capture node 3 with media contr oller [ 8.084096] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 8.146803] cfg80211: Loading compiled-in X.509 certificates for regulatory d atabase [ 8.167745] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 8.167793] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 8.186804] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 8.186878] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 8.249756] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 8.284635] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device [ 8.286933] usbcore: registered new interface driver cdc_acm [ 8.286952] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters [ 8.333007] brcmfmac: F1 signature read @0x18000000=0x15264345 [ 8.343035] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6 [ 8.344622] usbcore: registered new interface driver brcmfmac [ 8.370428] brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455 -sdio.raspberrypi,4-model-b.txt failed with error -2 [ 8.464726] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0 [ 8.491300] vc4-drm gpu: bound fe600000.firmwarekms (ops vc4_fkms_ops [vc4]) [ 8.491327] checking generic (3e5f6000 500000) vs hw (0 ffffffffffffffff) [ 8.491344] fb0: switching to vc4drmfb from simple [ 8.492006] Console: switching to colour dummy device 80x30 [ 8.498740] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1 [ 8.499022] vc4-drm gpu: [drm] HDMI-A-1: EDID is invalid: [ 8.499044] [00] BAD 00 ff ff ff ff ff ff 00 34 38 6e 07 c0 00 00 00 [ 8.499060] [00] BAD 1d 0d 01 03 a8 22 1b 00 e8 e7 3a 9b 57 49 90 24 [ 8.499076] [00] BAD 00 4a 50 bf ef 80 31 40 45 40 61 40 81 80 01 01 [ 8.499091] [00] BAD 01 01 01 01 01 01 30 2a 00 98 51 00 2a 40 30 70 [ 8.499106] [00] BAD 13 00 52 0e 11 00 00 1e 00 00 00 fd 00 38 4b 1e [ 8.499122] [00] BAD 54 0e 00 0a 20 20 20 20 20 20 00 00 00 fc 00 42 [ 8.499137] [00] BAD 5f 31 30 31 39 32 30 0a 20 20 20 20 00 00 00 10 [ 8.499152] [00] BAD 20 20 20 20 20 20 20 20 20 20 20 20 20 20 00 ff [ 8.514354] Console: switching to colour frame buffer device 160x64 [ 8.514407] vc4-drm gpu: [drm] fb0: vc4drmfb frame buffer device [ 8.630144] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio f or chip BCM4345/6 [ 8.639814] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Jan 4 2021 19:56:29 version 7.45.229 (617f1f5 CY) FWID 01-2dbd9d2e [ 8.695934] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 13.367004] uart-pl011 fe201000.serial: no DMA platform data [ 13.794421] 8021q: 802.1Q VLAN Support v1.8 [ 13.823512] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:1 02396k FS [ 14.427246] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled [ 14.854159] bcmgenet fd580000.ethernet: configuring instance for external RGM II (RX delay) [ 14.854808] bcmgenet fd580000.ethernet eth0: Link is Down [ 17.683284] broken atomic modeset userspace detected, disabling atomic [ 19.798159] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 20.353078] Bluetooth: Core ver 2.22 [ 20.353167] NET: Registered protocol family 31 [ 20.353174] Bluetooth: HCI device and connection manager initialized [ 20.354786] Bluetooth: HCI socket layer initialized [ 20.354815] Bluetooth: L2CAP socket layer initialized [ 20.354860] Bluetooth: SCO socket layer initialized [ 20.388913] Bluetooth: HCI UART driver ver 2.3 [ 20.388923] Bluetooth: HCI UART protocol H4 registered [ 20.388979] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 20.389129] Bluetooth: HCI UART protocol Broadcom registered [ 20.646910] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.646919] Bluetooth: BNEP filters: protocol multicast [ 20.646934] Bluetooth: BNEP socket layer initialized [ 21.503910] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net .ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instea d [ 21.704077] fuse: init (API version 7.32) [ 22.992313] Bluetooth: RFCOMM TTY layer initialized [ 22.992332] Bluetooth: RFCOMM socket layer initialized [ 22.992356] Bluetooth: RFCOMM ver 1.11 [ 133.452722] v3d fec00000.v3d: MMU error from client L2T (0) at 0xbce1000, pte invalid [ 749.401441] usb 1-1.3: USB disconnect, device number 5 [ 749.402199] cdc_acm 1-1.3:1.0: failed to set dtr/rts [ 772.734382] usb 1-1.3: new full-speed USB device number 7 using xhci_hcd [ 772.873385] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 772.873395] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 772.873403] usb 1-1.3: Product: ConBee II [ 772.873410] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 772.873417] usb 1-1.3: SerialNumber: DE2415113 [ 772.876111] cdc_acm 1-1.3:1.0: ttyACM1: USB ACM device [ 776.284934] usb 1-1.3: USB disconnect, device number 7 [ 776.584483] usb 1-1.3: new full-speed USB device number 8 using xhci_hcd [ 776.723440] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 776.723451] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 776.723458] usb 1-1.3: Product: ConBee II [ 776.723466] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 776.723472] usb 1-1.3: SerialNumber: DE2415113 [ 776.726160] cdc_acm 1-1.3:1.0: ttyACM1: USB ACM device [ 882.540855] usb 1-1.3: USB disconnect, device number 8 [ 882.541395] cdc_acm 1-1.3:1.0: failed to set dtr/rts [ 889.745584] usb 1-1.3: new full-speed USB device number 9 using xhci_hcd [ 889.884589] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 889.884600] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 889.884608] usb 1-1.3: Product: ConBee II [ 889.884615] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 889.884622] usb 1-1.3: SerialNumber: DE2415113 [ 889.887313] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device [ 893.293726] usb 1-1.3: USB disconnect, device number 9 [ 893.585589] usb 1-1.3: new full-speed USB device number 10 using xhci_hcd [ 893.724644] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 893.724654] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 893.724662] usb 1-1.3: Product: ConBee II [ 893.724669] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 893.724676] usb 1-1.3: SerialNumber: DE2415113 [ 893.727330] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device [ 1140.626441] usb 1-1.3: USB disconnect, device number 10 [ 1140.627337] cdc_acm 1-1.3:1.0: failed to set dtr/rts [ 1149.889867] usb 1-1.3: new full-speed USB device number 11 using xhci_hcd [ 1150.034867] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 1150.034889] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 1150.034899] usb 1-1.3: Product: ConBee II [ 1150.034908] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 1150.034916] usb 1-1.3: SerialNumber: DE2415113 [ 1150.045748] cdc_acm 1-1.3:1.0: ttyACM1: USB ACM device [ 1153.429213] usb 1-1.3: USB disconnect, device number 11 [ 1153.729938] usb 1-1.3: new full-speed USB device number 12 using xhci_hcd [ 1153.868829] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 1153.868842] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 1153.868850] usb 1-1.3: Product: ConBee II [ 1153.868857] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 1153.868865] usb 1-1.3: SerialNumber: DE2415113 [ 1153.871822] cdc_acm 1-1.3:1.0: ttyACM1: USB ACM device [ 1234.335862] usb 1-1.3: USB disconnect, device number 12 [ 1234.336508] cdc_acm 1-1.3:1.0: failed to set dtr/rts [ 2203.984711] usb 1-1.3: new full-speed USB device number 13 using xhci_hcd [ 2204.123730] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 2204.123741] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 2204.123748] usb 1-1.3: Product: ConBee II [ 2204.123756] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 2204.123763] usb 1-1.3: SerialNumber: DE2415113 [ 2204.128433] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device [ 2207.532710] usb 1-1.3: USB disconnect, device number 13 [ 2207.844717] usb 1-1.3: new full-speed USB device number 14 using xhci_hcd [ 2207.983793] usb 1-1.3: New USB device found, idVendor=1cf1, idProduct=0030, b cdDevice= 1.00 [ 2207.983803] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3 [ 2207.983810] usb 1-1.3: Product: ConBee II [ 2207.983818] usb 1-1.3: Manufacturer: dresden elektronik ingenieurtechnik GmbH [ 2207.983825] usb 1-1.3: SerialNumber: DE2415113 [ 2207.986487] cdc_acm 1-1.3:1.0: ttyACM0: USB ACM device pi@raspberrypi4-iob:~ $ -
@jasimi
Da bröseln dir inodes weg.
Nicht gut. -
@thomas-braun said in deCONZ Installation schlägt fehl:
@jasimi
Da bröseln dir inodes weg.
Nicht gut.was bröselt
-
@jasimi
Das Dateisystem. -
@thomas-braun said in deCONZ Installation schlägt fehl:
@jasimi
Das Dateisystem.Ich habe Deconz mal spaßeshalber unter Windows 10 installiert hat keine 5 min gedauert und funktioniert tadellos.
Also ist es doch der pi ?Ich habe Rasperian OS auf ssd installiert nicht auf sd-Karte.
-
@jasimi
Das sagt ja Null aus. Auf dem Windows läuft ja auch anderes Zeug nicht mit. Der MagicMirror-Kram z. B.Und das dein Raspberry OS angeschossen ist sagen uns ja die gelöschten inodes. Wer weiß was da drin lag.
-
@thomas-braun said in deCONZ Installation schlägt fehl:
@jasimi
Das sagt ja Null aus. Auf dem Windows läuft ja auch anderes Zeug nicht mit. Der MagicMirror-Kram z. B.Und das dein Raspberry OS angeschossen ist sagen uns ja die gelöschten inodes. Wer weiß was da drin lag.
Also alles neu installieren ?
-
Würde ich vermutlich machen, ja.
-
@thomas-braun said in deCONZ Installation schlägt fehl:
Würde ich vermutlich machen, ja.
Da bedanke ich mich bei dir für die viele Hilfe und auf ein neues.
