Zigbee startet nicht mehr
-
siehe oben, immer noch der gleiche Fehler
-
der gleiche Fehler
also hast du jetzt alles innerhalb von ca. 3 Minuten gemacht .. auch den Port nochmal in der Konsole überprüft und im Zigbee Adapter neu zugewiesen
habe ich mittel minicom installiert
da bin ich leider raus ...
-
Habe bevor ich hier den Thread aufgemacht schon alles gemacht und jetzt auch nochmal.
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.07__Embed_with_CMSIS-DAP_L4300302-if00isgt der COM Port
über USB ist nur der Zigbee Stick dran
-
@Malz1902 sagte in Zigbee startet nicht mehr:
bevor ich hier den Thread aufgemacht schon alles gemacht
... und warum hast du es nicht oben schon von Anfang an geschrieben , was du gemacht hast !?
-
hab auch ein Problem mit dem Zigbee Adapter er startet nicht mehr.
zigbee.0 2020-06-27 20:29:57.671 error (2689) SyntaxError: Unexpected token in JSON at position 895 at JSON.parse (<anonymous>) at Function.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/database.js:17:35) a zigbee.0 2020-06-27 20:29:57.668 error (2689) Failed to start Zigbee zigbee.0 2020-06-27 20:29:56.789 info (2689) Starting Zigbee... zigbee.0 2020-06-27 20:29:56.676 info (2689) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.21.0, js-controller: 3.1.5zigbee.0 2020-06-27 20:49:15.188 info (3878) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason zigbee.0 2020-06-27 20:49:15.182 info (3878) terminating zigbee.0 2020-06-27 20:49:15.178 error at process._tickCallback (internal/process/next_tick.js:68:7)) zigbee.0 2020-06-27 20:49:15.178 error at ZigbeeController.stop (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:306:24) zigbee.0 2020-06-27 20:49:15.178 error at ZigbeeController.permitJoin (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:319:30) zigbee.0 2020-06-27 20:49:15.178 error at ZigbeeController.getDevice (/opt/iobroker/node_modules/iobroker.zigbee/lib/zigbeecontroller.js:212:30) zigbee.0 2020-06-27 20:49:15.178 error at Controller.getDeviceByIeeeAddr (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:235:31) zigbee.0 2020-06-27 20:49:15.178 error at Function.byIeeeAddr (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:208:16) zigbee.0 2020-06-27 20:49:15.178 error at Function.loadFromDatabaseIfNecessary (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/model/device.js:200:55) zigbee.0 2020-06-27 20:49:15.178 error (3878) Failed to stop zigbee (TypeError: Cannot read property 'getEntries' of null zigbee.0 2020-06-27 20:49:15.156 info (3878) cleaned everything up... host.raspberrypi 2020-06-27 20:49:15.181 info stopInstance system.adapter.zigbee.0 send kill signal zigbee.0 2020-06-27 20:49:15.151 info (3878) Got terminate signal TERMINATE_YOURSELF host.raspberrypi 2020-06-27 20:49:15.126 info stopInstance system.adapter.zigbee.0 (force=false, process=true) host.raspberrypi 2020-06-27 20:49:15.124 info "system.adapter.zigbee.0" disabled zigbee.0 2020-06-27 20:49:13.814 error at process._tickCallback (internal/process/next_tick.js:68:7) zigbee.0 2020-06-27 20:49:13.814 error at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:5:58) zigbee.0 2020-06-27 20:49:13.814 error at Generator.next (<anonymous>) zigbee.0 2020-06-27 20:49:13.814 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:91:48) zigbee.0 2020-06-27 20:49:13.814 error at Function.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/database.js:17:35) zigbee.0 2020-06-27 20:49:13.814 error at JSON.parse (<anonymous>) zigbee.0 2020-06-27 20:49:13.814 error (3878) SyntaxError: Unexpected token in JSON at position 895 zigbee.0 2020-06-27 20:49:13.812 error (3878) Failed to start Zigbee zigbee.0 2020-06-27 20:49:13.416 info (3878) Starting Zigbee... zigbee.0 2020-06-27 20:49:13.414 info (3878) Try to reconnect. 1 attempts left zigbee.0 2020-06-27 20:49:03.409 error at process._tickCallback (internal/process/next_tick.js:68:7) zigbee.0 2020-06-27 20:49:03.409 error at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:5:58) zigbee.0 2020-06-27 20:49:03.409 error at Generator.next (<anonymous>) zigbee.0 2020-06-27 20:49:03.409 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:91:48) zigbee.0 2020-06-27 20:49:03.409 error at Function.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/database.js:17:35) zigbee.0 2020-06-27 20:49:03.409 error at JSON.parse (<anonymous>) zigbee.0 2020-06-27 20:49:03.409 error (3878) SyntaxError: Unexpected token in JSON at position 895 zigbee.0 2020-06-27 20:49:03.406 error (3878) Failed to start Zigbee zigbee.0 2020-06-27 20:49:02.490 info (3878) Starting Zigbee... zigbee.0 2020-06-27 20:49:02.374 info (3878) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.21.0, js-controller: 3.1.5hab ein CC2538 + CC2592 Stick von dimaiv.
Habe keine Updates oder sonst etwas an dem System gemacht oder geändert.
Bis vor 2 Stunden haben die Sensoren sich noch gemeldet.Neustart sowie Stick raus und rein habe ich schon gemacht, ist ein Slave auf nem Raspberry pi2.
-
@bishop Wenn du nichts gemacht hast ist vielleicht das Dateisystem in Auflösung begriffen.
-
@Thomas-Braun
Also vermutlich sd karte tauschen? -
-
pi@raspberrypi:~ $ dmesg [ 0.000000] Booting Linux on physical CPU 0xf00 [ 0.000000] Linux version 4.19.118-v7+ (dom@buildbot) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1311 SMP Mon Apr 27 14:21:24 BST 2020 [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 2 Model B Rev 1.1 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 8 MiB at 0x3ac00000 [ 0.000000] On node 0 totalpages: 242688 [ 0.000000] Normal zone: 2133 pages used for memmap [ 0.000000] Normal zone: 0 pages reserved [ 0.000000] Normal zone: 242688 pages, LIFO batch:63 [ 0.000000] random: get_random_bytes called from start_kernel+0xac/0x4b4 with crng_init=0 [ 0.000000] percpu: Embedded 16 pages/cpu s36864 r8192 d20480 u65536 [ 0.000000] pcpu-alloc: s36864 r8192 d20480 u65536 alloc=16*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 240555 [ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=tty1 root=PARTUUID=6c586e13-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.000000] Memory: 939068K/970752K available (8192K kernel code, 656K rwdata, 2232K rodata, 1024K init, 831K bss, 23492K reserved, 8192K cma-reserved) [ 0.000000] Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xffc00000 - 0xfff00000 (3072 kB) vmalloc : 0xbb800000 - 0xff800000 (1088 MB) lowmem : 0x80000000 - 0xbb400000 ( 948 MB) modules : 0x7f000000 - 0x80000000 ( 16 MB) .text : 0x(ptrval) - 0x(ptrval) (9184 kB) .init : 0x(ptrval) - 0x(ptrval) (1024 kB) .data : 0x(ptrval) - 0x(ptrval) ( 657 kB) .bss : 0x(ptrval) - 0x(ptrval) ( 832 kB) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 27093 entries in 80 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000009] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000031] Switching to timer-based delay loop, resolution 52ns [ 0.000355] Console: colour dummy device 80x30 [ 0.001081] console [tty1] enabled [ 0.001155] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.001208] pid_max: default: 32768 minimum: 301 [ 0.001681] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.001729] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.003013] CPU: Testing write buffer coherency: ok [ 0.003727] CPU0: update cpu_capacity 1024 [ 0.003771] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00 [ 0.004805] Setting up static identity map for 0x100000 - 0x10003c [ 0.005073] rcu: Hierarchical SRCU implementation. [ 0.006308] smp: Bringing up secondary CPUs ... [ 0.007638] CPU1: update cpu_capacity 1024 [ 0.007650] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01 [ 0.009078] CPU2: update cpu_capacity 1024 [ 0.009089] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02 [ 0.010503] CPU3: update cpu_capacity 1024 [ 0.010515] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03 [ 0.010674] smp: Brought up 1 node, 4 CPUs [ 0.010831] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.010859] CPU: All CPU(s) started in HYP mode. [ 0.010882] CPU: Virtualization extensions available. [ 0.012193] devtmpfs: initialized [ 0.028028] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5 [ 0.028460] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.028528] futex hash table entries: 1024 (order: 4, 65536 bytes) [ 0.029410] pinctrl core: initialized pinctrl subsystem [ 0.030817] NET: Registered protocol family 16 [ 0.034604] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.042185] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.042243] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.042533] Serial: AMBA PL011 UART driver [ 0.045622] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.060139] raspberrypi-firmware soc:firmware: Attached to firmware from 2020-04-15 11:43, variant start [ 0.070158] raspberrypi-firmware soc:firmware: Firmware hash is 82f9bb929ce2186eb1824178c1ae82902ad6275c [ 0.123338] bcm2835-dma 3f007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1 [ 0.125597] SCSI subsystem initialized [ 0.125969] usbcore: registered new interface driver usbfs [ 0.126075] usbcore: registered new interface driver hub [ 0.126259] usbcore: registered new device driver usb [ 0.128419] clocksource: Switched to clocksource arch_sys_counter [ 0.232496] VFS: Disk quotas dquot_6.6.0 [ 0.232650] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.232948] FS-Cache: Loaded [ 0.233289] CacheFiles: Loaded [ 0.247211] NET: Registered protocol family 2 [ 0.248870] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes) [ 0.248962] TCP established hash table entries: 8192 (order: 3, 32768 bytes) [ 0.249118] TCP bind hash table entries: 8192 (order: 4, 65536 bytes) [ 0.249331] TCP: Hash tables configured (established 8192 bind 8192) [ 0.249567] UDP hash table entries: 512 (order: 2, 16384 bytes) [ 0.249665] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes) [ 0.250047] NET: Registered protocol family 1 [ 0.251015] RPC: Registered named UNIX socket transport module. [ 0.251057] RPC: Registered udp transport module. [ 0.251083] RPC: Registered tcp transport module. [ 0.251108] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.253377] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 0.257602] Initialise system trusted keyrings [ 0.257972] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 0.271326] FS-Cache: Netfs 'nfs' registered for caching [ 0.272207] NFS: Registering the id_resolver key type [ 0.272275] Key type id_resolver registered [ 0.272302] Key type id_legacy registered [ 0.272341] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.279580] Key type asymmetric registered [ 0.279633] Asymmetric key parser 'x509' registered [ 0.279745] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250) [ 0.280027] io scheduler noop registered [ 0.280064] io scheduler deadline registered (default) [ 0.280362] io scheduler cfq registered [ 0.280396] io scheduler mq-deadline registered (default) [ 0.280425] io scheduler kyber registered [ 0.282994] bcm2708_fb soc:fb: FB found 1 display(s) [ 0.293426] Console: switching to colour frame buffer device 82x26 [ 0.301272] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 656x416 [ 0.309433] bcm2835-rng 3f104000.rng: hwrng registered [ 0.312530] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 0.318841] vc-sm: Videocore shared memory driver [ 0.322101] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000 [ 0.343698] brd: module loaded [ 0.360984] loop: module loaded [ 0.364585] Loading iSCSI transport class v2.0-870. [ 0.368545] libphy: Fixed MDIO Bus: probed [ 0.371437] usbcore: registered new interface driver lan78xx [ 0.374233] usbcore: registered new interface driver smsc95xx [ 0.376907] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 0.407595] dwc_otg 3f980000.usb: base=(ptrval) [ 0.610756] Core Release: 2.80a [ 0.613459] Setting default values for core params [ 0.616236] Finished setting default values for core params [ 0.819465] Using Buffer DMA mode [ 0.822175] Periodic Transfer Interrupt Enhancement - disabled [ 0.824915] Multiprocessor Interrupt Enhancement - disabled [ 0.827595] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 0.830269] Dedicated Tx FIFOs mode [ 0.833481] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = bad14000 dma = 0xfad14000 len=9024 [ 0.838712] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 0.851021] dwc_otg: Microframe scheduler enabled [ 0.851106] WARN::hcd_init_fiq:457: FIQ on core 1 [ 0.853631] WARN::hcd_init_fiq:458: FIQ ASM at 8068fda0 length 36 [ 0.856133] WARN::hcd_init_fiq:497: MPHI regs_base at bb810000 [ 0.858693] dwc_otg 3f980000.usb: DWC OTG Controller [ 0.861266] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 0.863899] dwc_otg 3f980000.usb: irq 56, io mem 0x00000000 [ 0.866499] Init: Port Power? op_state=1 [ 0.869076] Init: Power Port (0) [ 0.871895] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19 [ 0.876977] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 0.879735] usb usb1: Product: DWC OTG Controller [ 0.882412] usb usb1: Manufacturer: Linux 4.19.118-v7+ dwc_otg_hcd [ 0.885153] usb usb1: SerialNumber: 3f980000.usb [ 0.888742] hub 1-0:1.0: USB hub found [ 0.891357] hub 1-0:1.0: 1 port detected [ 0.894635] dwc_otg: FIQ enabled [ 0.894644] dwc_otg: NAK holdoff enabled [ 0.894650] dwc_otg: FIQ split-transaction FSM enabled [ 0.894663] Module dwc_common_port init [ 0.895082] usbcore: registered new interface driver usb-storage [ 0.897958] mousedev: PS/2 mouse device common for all mice [ 0.901767] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 0.904796] bcm2835-cpufreq: min=600000 max=900000 [ 0.908086] sdhci: Secure Digital Host Controller Interface driver [ 0.910866] sdhci: Copyright(c) Pierre Ossman [ 0.914133] sdhost-bcm2835 3f202000.mmc: could not get clk, deferring probe [ 0.917192] sdhci-pltfm: SDHCI platform and OF driver helper [ 0.920945] ledtrig-cpu: registered to indicate activity on CPUs [ 0.923977] hidraw: raw HID events driver (C) Jiri Kosina [ 0.927104] usbcore: registered new interface driver usbhid [ 0.930031] usbhid: USB HID core driver [ 0.933877] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0 [ 0.938750] [vc_sm_connected_init]: start [ 0.947730] [vc_sm_connected_init]: end - returning 0 [ 0.952065] Initializing XFRM netlink socket [ 0.954801] NET: Registered protocol family 17 [ 0.957624] Key type dns_resolver registered [ 0.960867] Registering SWP/SWPB emulation handler [ 0.964533] registered taskstats version 1 [ 0.967242] Loading compiled-in X.509 certificates [ 0.981054] sdhost: log_buf @ (ptrval) (fad13000) [ 1.030788] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 1.035217] of_cfs_init [ 1.038026] of_cfs_init: OK [ 1.041487] Waiting for root device PARTUUID=6c586e13-02... [ 1.092327] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.099771] mmc0: new high speed SDHC card at address b368 [ 1.103915] mmcblk0: mmc0:b368 7.46 GiB [ 1.108652] Indeed it is in host mode hprt0 = 00021501 [ 1.171432] mmcblk0: p1 p2 [ 1.198485] random: fast init done [ 1.203964] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.209170] VFS: Mounted root (ext4 filesystem) readonly on device 179:2. [ 1.222989] devtmpfs: mounted [ 1.233729] Freeing unused kernel memory: 1024K [ 1.248798] Run /sbin/init as init process [ 1.318501] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 1.321575] Indeed it is in host mode hprt0 = 00001101 [ 1.558901] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 1.564770] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 1.568876] hub 1-1:1.0: USB hub found [ 1.572170] hub 1-1:1.0: 5 ports detected [ 1.888525] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 2.018921] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 2.024940] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.031147] smsc95xx v1.0.6 [ 2.123246] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:79:91:b1 [ 2.160254] systemd[1]: System time before build time, advancing clock. [ 2.228491] usb 1-1.2: new high-speed USB device number 4 using dwc_otg [ 2.363585] NET: Registered protocol family 10 [ 2.369119] Segment Routing with IPv6 [ 2.376426] usb 1-1.2: New USB device found, idVendor=148f, idProduct=5370, bcdDevice= 1.01 [ 2.383150] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.386669] usb 1-1.2: Product: 802.11 n WLAN [ 2.390115] usb 1-1.2: Manufacturer: Ralink [ 2.393430] usb 1-1.2: SerialNumber: 1.0 [ 2.431840] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 2.443318] systemd[1]: Detected architecture arm. [ 2.488326] systemd[1]: Set hostname to <raspberrypi>. [ 2.708574] usb 1-1.4: new full-speed USB device number 5 using dwc_otg [ 2.856174] usb 1-1.4: New USB device found, idVendor=0a5c, idProduct=21e8, bcdDevice= 1.12 [ 2.862539] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.865786] usb 1-1.4: Product: BCM20702A0 [ 2.868962] usb 1-1.4: Manufacturer: Broadcom Corp [ 2.872127] usb 1-1.4: SerialNumber: 5CF3706272AB [ 3.573759] systemd[1]: /lib/systemd/system/pivccu.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/pivccu3.pid → /run/pivccu3.pid; please update the unit file accordingly. [ 3.750642] random: systemd: uninitialized urandom read (16 bytes read) [ 3.768991] random: systemd: uninitialized urandom read (16 bytes read) [ 3.773096] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 3.783665] random: systemd: uninitialized urandom read (16 bytes read) [ 3.795412] systemd[1]: Created slice system-getty.slice. [ 3.813664] systemd[1]: Listening on Syslog Socket. [ 3.824436] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 3.832013] systemd[1]: Reached target Swap. [ 3.840120] systemd[1]: Listening on Journal Socket (/dev/log). [ 4.942046] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null) [ 5.118294] systemd-journald[116]: Received request to flush runtime journal from PID 1 [ 5.896855] generic_raw_uart: loading out-of-tree module taints kernel. [ 5.900673] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 5.903856] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 5.903880] [vc_sm_connected_init]: start [ 5.905869] [vc_sm_connected_init]: installed successfully [ 5.926379] media: Linux media interface: v0.10 [ 5.974979] videodev: Linux video capture interface: v2.00 [ 6.080575] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 6.084455] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 6.100013] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 6.107399] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 6.114445] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 6.119977] pl011_raw_uart 3f201000.serial: Initialized pl011 device; mapbase=0x3f201000; irq=81; clockrate=47999625 [ 6.144579] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 6.144647] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 6.151741] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 6.151796] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 6.160607] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 6.160692] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 6.170300] bcm2835_audio soc:audio: card created with 8 channels [ 6.760347] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 6.832439] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 6.894465] Bluetooth: Core ver 2.22 [ 6.894600] NET: Registered protocol family 31 [ 6.894610] Bluetooth: HCI device and connection manager initialized [ 6.894640] Bluetooth: HCI socket layer initialized [ 6.894659] Bluetooth: L2CAP socket layer initialized [ 6.894719] Bluetooth: SCO socket layer initialized [ 7.004257] usbcore: registered new interface driver btusb [ 7.121047] Bluetooth: hci0: BCM: chip id 63 [ 7.122011] Bluetooth: hci0: BCM: features 0x07 [ 7.138071] Bluetooth: hci0: BCM20702A [ 7.139039] Bluetooth: hci0: BCM20702A1 (001.002.014) build 0000 [ 7.150835] bluetooth hci0: Direct firmware load for brcm/BCM20702A1-0a5c-21e8.hcd failed with error -2 [ 7.150868] Bluetooth: hci0: BCM: Patch brcm/BCM20702A1-0a5c-21e8.hcd not found [ 7.258632] usb 1-1.2: reset high-speed USB device number 4 using dwc_otg [ 7.399537] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 7.418605] rtc-rx8130 1-0032: Unable to read registers #28..#30 [ 7.418629] i2c i2c-1: probing for rx8130 failed [ 7.418674] rtc-rx8130: probe of 1-0032 failed with error -121 [ 7.436032] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 7.510636] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 7.513155] usbcore: registered new interface driver rt2800usb [ 7.891336] random: crng init done [ 7.891360] random: 7 urandom warning(s) missed due to ratelimiting [ 8.709566] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this. [ 8.744663] br0: port 1(eth0) entered blocking state [ 8.744683] br0: port 1(eth0) entered disabled state [ 8.745296] device eth0 entered promiscuous mode [ 8.859939] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 8.880195] br0: port 1(eth0) entered blocking state [ 8.880216] br0: port 1(eth0) entered forwarding state [ 8.880460] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready [ 9.426793] new mount options do not match the existing superblock, will be ignored [ 9.573415] fuse init (API version 7.27) [ 9.758558] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready [ 10.471647] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xCDE1 [ 10.528482] usb 1-1.5: new full-speed USB device number 6 using dwc_otg [ 10.661904] usb 1-1.5: New USB device found, idVendor=0451, idProduct=16c8, bcdDevice= 1.00 [ 10.661922] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 10.661930] usb 1-1.5: Product: CC2538 USB CDC [ 10.661938] usb 1-1.5: Manufacturer: Texas Instruments [ 10.939175] cdc_acm 1-1.5:1.0: ttyACM0: USB ACM device [ 10.941706] usbcore: registered new interface driver cdc_acm [ 10.941723] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 11.123432] Adding 102396k swap on /var/swap. Priority:-2 extents:5 across:1295108k SSFS [ 11.128180] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 11.128192] Bluetooth: BNEP filters: protocol multicast [ 11.128224] Bluetooth: BNEP socket layer initialized [ 27.775554] raw-uart raw-uart: Reset radio module [ 65.110423] br0: port 2(vethpivccu) entered blocking state [ 65.110448] br0: port 2(vethpivccu) entered disabled state [ 65.111205] device vethpivccu entered promiscuous mode [ 65.112717] IPv6: ADDRCONF(NETDEV_UP): vethpivccu: link is not ready [ 65.204212] eth0: renamed from vethNCHQWD [ 65.280463] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 65.286128] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 65.286461] IPv6: ADDRCONF(NETDEV_CHANGE): vethpivccu: link becomes ready [ 65.286612] br0: port 2(vethpivccu) entered blocking state [ 65.286623] br0: port 2(vethpivccu) entered forwarding state [ 71.270612] FS-Cache: Netfs 'cifs' registered for caching [ 71.271586] Key type cifs.spnego registered [ 71.271622] Key type cifs.idmap registered [ 84.150212] eq3loop: created slave mmd_hmip [ 84.151404] eq3loop: created slave mmd_bidcos [ 99.133310] eq3loop: eq3loop_open_slave() mmd_bidcos [ 150.109984] eq3loop: eq3loop_open_slave() mmd_hmip [ 150.110396] eq3loop: eq3loop_close_slave() mmd_hmip [ 150.116545] eq3loop: eq3loop_open_slave() mmd_hmip [ 150.116880] eq3loop: eq3loop_close_slave() mmd_hmip [ 150.144191] eq3loop: eq3loop_open_slave() mmd_hmip [ 902.398362] usb 1-1.5: USB disconnect, device number 6 [ 916.778168] usb 1-1.5: new full-speed USB device number 7 using dwc_otg [ 916.911539] usb 1-1.5: New USB device found, idVendor=0451, idProduct=16c8, bcdDevice= 1.00 [ 916.911557] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 916.911565] usb 1-1.5: Product: CC2538 USB CDC [ 916.911572] usb 1-1.5: Manufacturer: Texas Instruments [ 916.912911] cdc_acm 1-1.5:1.0: ttyACM0: USB ACM deviceich kann da nichts ungewöhnliches sehen!
-
@bishop sagte in Zigbee startet nicht mehr:
[ 1.092327] mmc0: host does not support reading read-only switch, assuming write-enable [ 1.099771] mmc0: new high speed SDHC card at address b368 [ 1.103915] mmcblk0: mmc0:b368 7.46 GiB [ 1.108652] Indeed it is in host mode hprt0 = 00021501 [ 1.171432] mmcblk0: p1 p2 [ 1.198485] random: fast init done [ 1.203964] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null) [ 1.209170] VFS: Mounted root (ext4 filesystem) readonly on device 179:2..426793] new mount options do not match the existing superblock, will be ignoredSieht ein wenig verdächtig aus, imho.
Insbesondere, dass / nur ro gemounted wird.Schau mal mit
mount | grep ^/devdanach.
-
/dev/mmcblk0p2 on / type ext4 (rw,noatime) /dev/mmcblk0p1 on /boot type vfat (rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro) -
which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs -
pi@raspberrypi:~ $ which nodejs && nodejs -v && which node && node -v && which npm && npm -v && apt policy nodejs /usr/bin/nodejs v10.21.0 /usr/bin/node v10.21.0 /usr/bin/npm 6.14.4 nodejs: Installiert: 10.21.0-1nodesource1 Installationskandidat: 10.21.0-1nodesource1 Versionstabelle: *** 10.21.0-1nodesource1 500 500 https://deb.nodesource.com/node_10.x buster/main armhf Packages 100 /var/lib/dpkg/status 10.21.0~dfsg-1~deb10u1+rpi1 500 500 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packageshab mal eine andere Sd Karte benutzt aber leider das gleiche!
host.raspberrypi 2020-06-28 13:21:51.274 info "system.adapter.zigbee.0" disabled zigbee.0 2020-06-28 13:21:21.452 error at process._tickCallback (internal/process/next_tick.js:68:7) zigbee.0 2020-06-28 13:21:21.452 error at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:5:58) zigbee.0 2020-06-28 13:21:21.452 error at Generator.next (<anonymous>) zigbee.0 2020-06-28 13:21:21.452 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:91:48) zigbee.0 2020-06-28 13:21:21.452 error at Function.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/database.js:17:35) zigbee.0 2020-06-28 13:21:21.452 error at JSON.parse (<anonymous>) zigbee.0 2020-06-28 13:21:21.452 error (1898) SyntaxError: Unexpected token in JSON at position 895 zigbee.0 2020-06-28 13:21:21.449 error (1898) Failed to start Zigbee zigbee.0 2020-06-28 13:21:21.014 info (1898) Starting Zigbee... zigbee.0 2020-06-28 13:21:21.012 info (1898) Try to reconnect. 1 attempts left zigbee.0 2020-06-28 13:21:11.008 error at process._tickCallback (internal/process/next_tick.js:68:7) zigbee.0 2020-06-28 13:21:11.008 error at fulfilled (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:5:58) zigbee.0 2020-06-28 13:21:11.008 error at Generator.next (<anonymous>) zigbee.0 2020-06-28 13:21:11.008 error at Controller.<anonymous> (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/controller.js:91:48) zigbee.0 2020-06-28 13:21:11.008 error at Function.open (/opt/iobroker/node_modules/zigbee-herdsman/dist/controller/database.js:17:35) zigbee.0 2020-06-28 13:21:11.008 error at JSON.parse (<anonymous>) zigbee.0 2020-06-28 13:21:11.008 error (1898) SyntaxError: Unexpected token in JSON at position 895 zigbee.0 2020-06-28 13:21:11.005 error (1898) Failed to start Zigbee zigbee.0 2020-06-28 13:21:09.960 info (1898) Starting Zigbee... zigbee.0 2020-06-28 13:21:09.838 info (1898) starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.zigbee, node: v10.21.0, js-controller: 3.1.5ohne den Stick wird der Adapter auch nicht Grün, also kann es wohl nicht am Stick liegen oder?
Ein komplettes löschen des ZigbeeAdapters habe ich auch schon versucht. -
@Malz1902 sagte in Zigbee startet nicht mehr:
Habe bevor ich hier den Thread aufgemacht schon alles gemacht und jetzt auch nochmal.
/dev/serial/by-id/usb-Texas_Instruments_XDS110__03.00.00.07__Embed_with_CMSIS-DAP_L4300302-if00isgt der COM Port
über USB ist nur der Zigbee Stick dran
Das ist aber kein Stick, oder hast du den umgeflasht?
-
@dimaiv
Nutze einen CC1352R1Hab die Firmware nochmal neugeflasht, daanch ging wieder alles
-
hat vielleicht noch jemand ein Tip für mich das ich tun kann?
-
@bishop
Hi, hast du das schon mal gemacht:
ls -la /dev/serial/by-id
? -
@dimaiv
japi@raspberrypi:~ $ ls -la /dev/serial/by-id insgesamt 0 drwxr-xr-x 2 root root 60 Jun 29 18:21 . drwxr-xr-x 4 root root 80 Jun 29 18:21 .. lrwxrwxrwx 1 root root 13 Jun 29 18:21 usb-Texas_Instruments_CC2538_USB_CDC-if00 -> ../../ttyACM0ich habe pivccu3 noch auf dem Raspberry laufen mit den dementsprechenden Adapter, kann das ein Problem sein?
Lief jetzt alles Monate lang ohne Probleme...
-
@bishop
Also, der Stick funktioniert.
Mit pivccu3 kenne mich nicht aus. -
mittlerweile kommt:
pi@raspberrypi:~ $ ls -la /dev/serial/by-path/ insgesamt 0 drwxr-xr-x 2 root root 60 Jun 30 16:36 . drwxr-xr-x 4 root root 80 Jun 30 16:36 .. lrwxrwxrwx 1 root root 13 Jun 30 16:36 platform-3f980000.usb-usb-0:1.5:1.0 -> ../../ttyACM0ah falsch von mir
pi@raspberrypi:~ $ ls -la /dev/serial/by-id insgesamt 0 drwxr-xr-x 2 root root 60 Jun 30 16:36 . drwxr-xr-x 4 root root 80 Jun 30 16:36 .. lrwxrwxrwx 1 root root 13 Jun 30 16:36 usb-Texas_Instruments_CC2538_USB_CDC-if00 -> ../../ttyACM0
