Adapter: broadlink2
-
Danke für deine schnelle antwort.
Device RM:Broadlink_RM4Pro dedected: address=192.168.0.141, mac=24:df:a7:d3:27:57, typ=rm4p, id=0x6026 devtype=RM4 ProFunktioniert mit den einstellungen im config auch nicht. RFlearn geht nicht. IR sehr wohl.
Fehlt beim RF die Frequenzangabe? 433,92 z.B. Wartet der Broadlink auf die eingabe?
-
@P-A-L-A-D-I-N sagte in Adapter: broadlink2:
Ich habe Probleme, meine Geräte in die IHC for EU App zu bekommen!
Hast dus schon mit der
e-Controlvon broadlink probiert? Die verwend ich. IHC ist ein OEM von broadlink der auch einige Geräte hat aber vielleicht noch nicht die neuen Protokolle kennt. -
@muckel sagte in Adapter: broadlink2:
Device RM:Broadlink_RM4Pro dedected: address=192.168.0.141, mac=24:df:a7:d3:27:57, typ=rm4p, id=0x6026 devtype=RM4 ProOk, 0x6026 ist schon als RM4P eingetragen und wenn er auf bei LearnRF nicht leuchtet/Antwortet dann ist es vielleicht ein 'falscher' RM4 der zwar den ID verwendet aber nicht die HW hat.
Übrigens, bei richtigen Pro's kann man RF-Geräte die 433MHz verwenden normal auch mit dem normalen Learn anlernen, nur für Geräte abseits der 433MHz brauch man das LearnRF. Hast das auch schon probiert?
Der Adapter ist jedenfalls nicht die Einschränkung.
P.s.: Habe selbst auch einen RM4 Mini Pro der kein RF kann, ist es ein dreieckiges oder kleines rundes Gerät? Als ich im Shop nachgefragt habe haben die gesagt dass nur die größeren dreieckigen RF können... weiß nicht ob das stimmt.
-
ich habe diesen gekauft:
https://www.amazon.de/gp/product/B083X9S9MB/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1Mit IR Learning findet er auch nichts, aber die orange LED schaltet sich ein. Was er bei RF leraning nicht macht.
Im Cloud modus hat er die codes der RF Fernbedienung anstandslos gelernt und richtig ausgeführt.
-
@Dischro sagte in Adapter: broadlink2:
@frankjoke
Die Frage ging zwar nicht an mich, bei mir ist es die ID=0x61a2 und wird auch vom Adapter als RM4P erkannt, aber RF geht trotzdem nicht.Auch dieser ist als RM4P bei mir drinnen, wird ein LearnRF im Objektbaum aufgebaut (um das zu sehen vielleicht vor dem nächsten restart löschen!)?
Ich habe leider keine neuen RM4P's zum testen, sonder nur nen RM2 Pro+.
Könnt ihr mal in den debug mode schalten und schauen was im log steht wenn ihr LearnRF drückt?
Habe mal 2 Tasten mir LearnRF angelernt, das schaut dann so aus:
2020-06-19 22:35:04.668 - info: broadlink2.0 (5372) Start RF-sweep with RM:Broadlink-RMPROPLUS-f4-53-11: Please press button on RF remote until frequency found! 2020-06-19 22:35:07.382 - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 30 seconds! 2020-06-19 22:35:08.652 - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 29 seconds! 2020-06-19 22:35:10.232 - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 28 seconds! 2020-06-19 22:35:11.362 - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 27 seconds! 2020-06-19 22:35:12.533 - info: broadlink2.0 (5372) found Frequency 1 of 2, you can release button now! 2020-06-19 22:35:13.536 - info: broadlink2.0 (5372) To complete learning single press button you want to lear now! 2020-06-19 22:35:14.791 - info: broadlink2.0 (5372) Please single press button you want to learn in next 9 seconds! 2020-06-19 22:35:16.211 - info: broadlink2.0 (5372) Please single press button you want to learn in next 8 seconds! 2020-06-19 22:35:17.644 - info: broadlink2.0 (5372) Please single press button you want to learn in next 7 seconds! 2020-06-19 22:35:18.772 - info: broadlink2.0 (5372) Please single press button you want to learn in next 6 seconds! 2020-06-19 22:35:20.297 - info: broadlink2.0 (5372) Found learned button! 2020-06-19 22:35:20.328 - info: broadlink2.0 (5372) Learned new RF Code RM:Broadlink-RMPROPLUS-f4-53-11 (hex): 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 2020-06-19 22:35:41.405 - info: broadlink2.0 (5372) Start RF-sweep with RM:Broadlink-RMPROPLUS-f4-53-11: Please press button on RF remote until frequency found! 2020-06-19 22:35:43.114 - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 30 seconds! 2020-06-19 22:35:44.145 - info: broadlink2.0 (5372) found Frequency 1 of 2, you can release button now! 2020-06-19 22:35:45.148 - info: broadlink2.0 (5372) To complete learning single press button you want to lear now! 2020-06-19 22:35:46.449 - info: broadlink2.0 (5372) Found learned button! 2020-06-19 22:35:46.473 - info: broadlink2.0 (5372) Learned new RF Code RM:Broadlink-RMPROPLUS-f4-53-11 (hex): b100d00009200a2009200920092009200a1f0a1f0a20092009201e0b0a20092009201e0b0a1f1f0b09201e0b0a1f1e0b0a2009200a00013f0a1f0a200920092009200a200920092009200a1f09201e0c09200a1f0a1f1e0c09201e0b09201e0c09201e0b09200a1f0a0001400920092009200a200920092009200a1f0a1f0a2009201e0b0a1f0a1f0a201e0b09201e0b0a201e0b09201e0c09200920090001400a1f0a200920092009200a1f0a20092009200a1f0a1f1e0c092009200a1f1e0b0a201e0b0a1f1e0b0a201e0b1e0b1e0b0a0005dc0000000000000000 -
@frankjoke
LearnRF vorher gelöscht und wurde wieder erstelltbroadlink2.0 2020-06-19 22:51:13.945 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:13.772 info (2628) Could not find frequency, will stop learning! broadlink2.0 2020-06-19 22:51:13.769 info (2628) Continue to press button on RF remote for maximal 1 seconds! broadlink2.0 2020-06-19 22:51:13.766 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:12.597 info (2628) Continue to press button on RF remote for maximal 2 seconds! broadlink2.0 2020-06-19 22:51:12.595 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:11.423 info (2628) Continue to press button on RF remote for maximal 3 seconds! broadlink2.0 2020-06-19 22:51:11.420 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:10.249 info (2628) Continue to press button on RF remote for maximal 4 seconds! broadlink2.0 2020-06-19 22:51:10.247 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:09.075 info (2628) Continue to press button on RF remote for maximal 5 seconds! broadlink2.0 2020-06-19 22:51:09.073 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:07.902 info (2628) Continue to press button on RF remote for maximal 6 seconds! broadlink2.0 2020-06-19 22:51:07.900 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:06.728 info (2628) Continue to press button on RF remote for maximal 7 seconds! broadlink2.0 2020-06-19 22:51:06.726 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:05.539 info (2628) Continue to press button on RF remote for maximal 8 seconds! broadlink2.0 2020-06-19 22:51:05.537 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:04.365 info (2628) Continue to press button on RF remote for maximal 9 seconds! broadlink2.0 2020-06-19 22:51:04.363 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:03.190 info (2628) Continue to press button on RF remote for maximal 10 seconds! broadlink2.0 2020-06-19 22:51:03.184 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:02.016 info (2628) Continue to press button on RF remote for maximal 11 seconds! broadlink2.0 2020-06-19 22:51:02.013 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:51:00.837 info (2628) Continue to press button on RF remote for maximal 12 seconds! broadlink2.0 2020-06-19 22:51:00.835 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:59.668 info (2628) Continue to press button on RF remote for maximal 13 seconds! broadlink2.0 2020-06-19 22:50:59.666 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:58.494 info (2628) Continue to press button on RF remote for maximal 14 seconds! broadlink2.0 2020-06-19 22:50:58.492 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:57.323 info (2628) Continue to press button on RF remote for maximal 15 seconds! broadlink2.0 2020-06-19 22:50:57.321 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:56.149 info (2628) Continue to press button on RF remote for maximal 16 seconds! broadlink2.0 2020-06-19 22:50:56.147 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:54.978 info (2628) Continue to press button on RF remote for maximal 17 seconds! broadlink2.0 2020-06-19 22:50:54.976 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:53.803 info (2628) Continue to press button on RF remote for maximal 18 seconds! broadlink2.0 2020-06-19 22:50:53.801 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:52.632 info (2628) Continue to press button on RF remote for maximal 19 seconds! broadlink2.0 2020-06-19 22:50:52.630 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:51.459 info (2628) Continue to press button on RF remote for maximal 20 seconds! broadlink2.0 2020-06-19 22:50:51.456 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:50.285 info (2628) Continue to press button on RF remote for maximal 21 seconds! broadlink2.0 2020-06-19 22:50:50.283 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:49.115 info (2628) Continue to press button on RF remote for maximal 22 seconds! broadlink2.0 2020-06-19 22:50:49.113 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:47.931 info (2628) Continue to press button on RF remote for maximal 23 seconds! broadlink2.0 2020-06-19 22:50:47.929 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:46.757 info (2628) Continue to press button on RF remote for maximal 24 seconds! broadlink2.0 2020-06-19 22:50:46.755 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:45.585 info (2628) Continue to press button on RF remote for maximal 25 seconds! broadlink2.0 2020-06-19 22:50:45.583 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:44.417 info (2628) Continue to press button on RF remote for maximal 26 seconds! broadlink2.0 2020-06-19 22:50:44.415 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:43.246 info (2628) Continue to press button on RF remote for maximal 27 seconds! broadlink2.0 2020-06-19 22:50:43.244 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:42.077 info (2628) Continue to press button on RF remote for maximal 28 seconds! broadlink2.0 2020-06-19 22:50:42.074 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:40.907 info (2628) Continue to press button on RF remote for maximal 29 seconds! broadlink2.0 2020-06-19 22:50:40.905 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:39.734 info (2628) Continue to press button on RF remote for maximal 30 seconds! broadlink2.0 2020-06-19 22:50:39.732 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:38.563 info (2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full' broadlink2.0 2020-06-19 22:50:38.335 info (2628) Start RF-sweep with RM:RM4-pro-e4-8b-94: Please press button on RF remote until frequency found! -
@moj090 said in Adapter: broadlink2:
Hi @frankjoke,
ich habe mir zum testen mit meinem RM4 Pro RF Steckdosen auf Amazon bestellt und wenn ich RF Learn drücke passiert folgendes in den Logs:
broadlink2.0 2020-06-16 20:57:44.685 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:44.524 info (19554) Could not find frequency, will stop learning! broadlink2.0 2020-06-16 20:57:44.523 info (19554) Continue to press button on RF remote for maximal 1 seconds! broadlink2.0 2020-06-16 20:57:44.522 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:43.357 info (19554) Continue to press button on RF remote for maximal 2 seconds! broadlink2.0 2020-06-16 20:57:43.356 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:42.195 info (19554) Continue to press button on RF remote for maximal 3 seconds! broadlink2.0 2020-06-16 20:57:42.194 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:41.035 info (19554) Continue to press button on RF remote for maximal 4 seconds! broadlink2.0 2020-06-16 20:57:41.034 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:39.875 info (19554) Continue to press button on RF remote for maximal 5 seconds! broadlink2.0 2020-06-16 20:57:39.874 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:38.713 info (19554) Continue to press button on RF remote for maximal 6 seconds! broadlink2.0 2020-06-16 20:57:38.712 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:37.554 info (19554) Continue to press button on RF remote for maximal 7 seconds! broadlink2.0 2020-06-16 20:57:37.553 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:36.394 info (19554) Continue to press button on RF remote for maximal 8 seconds! broadlink2.0 2020-06-16 20:57:36.393 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:35.213 info (19554) Continue to press button on RF remote for maximal 9 seconds! broadlink2.0 2020-06-16 20:57:35.212 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:34.047 info (19554) Continue to press button on RF remote for maximal 10 seconds! broadlink2.0 2020-06-16 20:57:34.046 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:32.882 info (19554) Continue to press button on RF remote for maximal 11 seconds! broadlink2.0 2020-06-16 20:57:32.881 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:31.724 info (19554) Continue to press button on RF remote for maximal 12 seconds! broadlink2.0 2020-06-16 20:57:31.723 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:30.562 info (19554) Continue to press button on RF remote for maximal 13 seconds! broadlink2.0 2020-06-16 20:57:30.561 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:29.395 info (19554) Continue to press button on RF remote for maximal 14 seconds! broadlink2.0 2020-06-16 20:57:29.394 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:28.232 info (19554) Continue to press button on RF remote for maximal 15 seconds! broadlink2.0 2020-06-16 20:57:28.232 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:27.073 info (19554) Continue to press button on RF remote for maximal 16 seconds! broadlink2.0 2020-06-16 20:57:27.073 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:25.900 info (19554) Continue to press button on RF remote for maximal 17 seconds! broadlink2.0 2020-06-16 20:57:25.899 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:24.733 info (19554) Continue to press button on RF remote for maximal 18 seconds! broadlink2.0 2020-06-16 20:57:24.732 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:23.558 info (19554) Continue to press button on RF remote for maximal 19 seconds! broadlink2.0 2020-06-16 20:57:23.557 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:22.397 info (19554) Continue to press button on RF remote for maximal 20 seconds! broadlink2.0 2020-06-16 20:57:22.396 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:21.237 info (19554) Continue to press button on RF remote for maximal 21 seconds! broadlink2.0 2020-06-16 20:57:21.236 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:20.075 info (19554) Continue to press button on RF remote for maximal 22 seconds! broadlink2.0 2020-06-16 20:57:20.075 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:18.916 info (19554) Continue to press button on RF remote for maximal 23 seconds! broadlink2.0 2020-06-16 20:57:18.915 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:17.754 info (19554) Continue to press button on RF remote for maximal 24 seconds! broadlink2.0 2020-06-16 20:57:17.753 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:16.594 info (19554) Continue to press button on RF remote for maximal 25 seconds! broadlink2.0 2020-06-16 20:57:16.593 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:15.357 info (19554) Continue to press button on RF remote for maximal 26 seconds! broadlink2.0 2020-06-16 20:57:15.356 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:14.190 info (19554) Continue to press button on RF remote for maximal 27 seconds! broadlink2.0 2020-06-16 20:57:14.189 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:13.026 info (19554) Continue to press button on RF remote for maximal 28 seconds! broadlink2.0 2020-06-16 20:57:13.026 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:11.866 info (19554) Continue to press button on RF remote for maximal 29 seconds! broadlink2.0 2020-06-16 20:57:11.865 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:10.707 info (19554) Continue to press button on RF remote for maximal 30 seconds! broadlink2.0 2020-06-16 20:57:10.706 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:09.538 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:57:09.319 info (19554) Start RF-sweep with RM:RM4: Please press button on RF remote until mfrequency found! broadlink2.0 2020-06-16 20:10:45.230 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:45.073 info (19554) Could not find frequency, will stop learning! broadlink2.0 2020-06-16 20:10:45.072 info (19554) Continue to press button on RF remote for maximal 1 seconds! broadlink2.0 2020-06-16 20:10:45.071 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:43.910 info (19554) Continue to press button on RF remote for maximal 2 seconds! broadlink2.0 2020-06-16 20:10:43.909 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:42.750 info (19554) Continue to press button on RF remote for maximal 3 seconds! broadlink2.0 2020-06-16 20:10:42.749 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:41.575 info (19554) Continue to press button on RF remote for maximal 4 seconds! broadlink2.0 2020-06-16 20:10:41.574 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:40.415 info (19554) Continue to press button on RF remote for maximal 5 seconds! broadlink2.0 2020-06-16 20:10:40.415 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:39.255 info (19554) Continue to press button on RF remote for maximal 6 seconds! broadlink2.0 2020-06-16 20:10:39.254 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:38.093 info (19554) Continue to press button on RF remote for maximal 7 seconds! broadlink2.0 2020-06-16 20:10:38.092 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:36.936 info (19554) Continue to press button on RF remote for maximal 8 seconds! broadlink2.0 2020-06-16 20:10:36.935 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:35.776 info (19554) Continue to press button on RF remote for maximal 9 seconds! broadlink2.0 2020-06-16 20:10:35.775 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:34.613 info (19554) Continue to press button on RF remote for maximal 10 seconds! broadlink2.0 2020-06-16 20:10:34.612 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:33.447 info (19554) Continue to press button on RF remote for maximal 11 seconds! broadlink2.0 2020-06-16 20:10:33.447 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:32.287 info (19554) Continue to press button on RF remote for maximal 12 seconds! broadlink2.0 2020-06-16 20:10:32.286 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:31.125 info (19554) Continue to press button on RF remote for maximal 13 seconds! broadlink2.0 2020-06-16 20:10:31.125 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:29.966 info (19554) Continue to press button on RF remote for maximal 14 seconds! broadlink2.0 2020-06-16 20:10:29.965 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:28.795 info (19554) Continue to press button on RF remote for maximal 15 seconds! broadlink2.0 2020-06-16 20:10:28.795 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:27.599 info (19554) Continue to press button on RF remote for maximal 16 seconds! broadlink2.0 2020-06-16 20:10:27.598 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:26.438 info (19554) Continue to press button on RF remote for maximal 17 seconds! broadlink2.0 2020-06-16 20:10:26.438 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:25.279 info (19554) Continue to press button on RF remote for maximal 18 seconds! broadlink2.0 2020-06-16 20:10:25.278 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:24.119 info (19554) Continue to press button on RF remote for maximal 19 seconds! broadlink2.0 2020-06-16 20:10:24.118 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:22.958 info (19554) Continue to press button on RF remote for maximal 20 seconds! broadlink2.0 2020-06-16 20:10:22.957 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:21.797 info (19554) Continue to press button on RF remote for maximal 21 seconds! broadlink2.0 2020-06-16 20:10:21.796 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:20.633 info (19554) Continue to press button on RF remote for maximal 22 seconds! broadlink2.0 2020-06-16 20:10:20.632 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:19.470 info (19554) Continue to press button on RF remote for maximal 23 seconds! broadlink2.0 2020-06-16 20:10:19.469 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:18.309 info (19554) Continue to press button on RF remote for maximal 24 seconds! broadlink2.0 2020-06-16 20:10:18.308 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:17.149 info (19554) Continue to press button on RF remote for maximal 25 seconds! broadlink2.0 2020-06-16 20:10:17.148 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:15.986 info (19554) Continue to press button on RF remote for maximal 26 seconds! broadlink2.0 2020-06-16 20:10:15.985 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:14.825 info (19554) Continue to press button on RF remote for maximal 27 seconds! broadlink2.0 2020-06-16 20:10:14.824 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:13.663 info (19554) Continue to press button on RF remote for maximal 28 seconds! broadlink2.0 2020-06-16 20:10:13.660 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:12.501 info (19554) Continue to press button on RF remote for maximal 29 seconds! broadlink2.0 2020-06-16 20:10:12.500 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:11.339 info (19554) Continue to press button on RF remote for maximal 30 seconds! broadlink2.0 2020-06-16 20:10:11.338 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:10.177 info (19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full broadlink2.0 2020-06-16 20:10:09.955 info (19554) Start RF-sweep with RM:RM4: Please press button on RF remote until mfrequency found!Woran kann das liegen?
Danke und Gruß
moJODer gleiche Fehler auch bei mir mit dem RM4P. RF Anlernen über den normalen Learn Button funktioniert bei mir auch nicht.
Gruß
moJO -
Die e-Control App hatte ich früher mal auf dem Telefon und sie dann zugunsten der IHC (zunächst nicht "für EU") runtergeworfen, weil diese wohl die neuere / bessere sein sollte und die alte(n) App(s) nicht mehr weiterentwickelt werden sollten. So war zumindest damals das Credo im Netz bez. der vielen verschiedenen Broadlink-Apps, die im Umlauf sind.
Bin dann zuletzt von IHC (normal) zu IHC für EU umgestiegen, um auch die Alexa-Einbindung (Alexa Skillverknüpfung) nutzen zu können, wenn der ioBroker mal wieder herumzicken sollte (was bei mir aktuell leider schon wieder der Fall ist).
Womit wir auch schon gleich beim wesentlichen Punkt wären: Mit der e-Control App geht das ja vermutlich nicht, oder? Sofern e-Control die direkte Alexa-Einbindung nicht unterstützt, würde ich daher nur ungern von der IHC-App weggehen. Verstehe auch nicht, weshalb die App überhaupt solche Probleme macht - der RM Mini 3 ist doch jetzt nicht wirklich neu...?!
-
@Dischro
@moj090
Das schaut nicht gut aus! Das Gerät meldet diesen Fehler:'The device storage is full'aber ich kann nciht lokalisieren auf welchen Befehl!Habe in jetziger Git-Version eine zusätzliche >Info eingebaut wo der Befehl angezeigt werden soll, kannst das mal damit checken?
Die bisherigen RM's werden abgefragt (verschiedene Befehle) ob sie die Frequenz erkannt haben und dann ob sie die Taste erkannt haben. Aber hier tritt der Fehler anscheinend am Anfang schon auf.
p.s.: Hatte gestern als ich dazu schon antworten wollte einen Internetausfall meines Providers, alles - DSL und mobile Daten - ist ausgefallen und ich konnte weder posten noch ein git update machen. Jetzt ist die erweiterte info auf git.
-
@frankjoke Kannst Du vielleicht nochmal eine kleine Anleitung posten wie man genau vorgeht um die schaltbaren States anzulegen?
-
@P-A-L-A-D-I-N sagte in Adapter: broadlink2:
Womit wir auch schon gleich beim wesentlichen Punkt wären: Mit der e-Control App geht das ja vermutlich nicht, oder? Sofern e-Control die direkte Alexa-Einbindung nicht unterstützt, würde ich daher nur ungern von der IHC-App weggehen. Verstehe auch nicht, weshalb die App überhaupt solche Probleme macht - der RM Mini 3 ist doch jetzt nicht wirklich neu...?!
Nein, die neue Broadlink cloud mit Alexa-support wird davon nicht unterstützt. Mir macht das nichts aus da ich ausschließlich über ioBroker mit Alexa kommuniziere und KEINE andere Alexa-App mit irgendwelchen Geräten im Haus kommunizieren lasse. Ein Grund hierfür ist dass ich verschiedene Technologien verwende die alle unterschiedliche Apps bräuchten (Phillips Hue, IKEA, Homematic, Broadlink, FS20, Bosch, Samsung, um nur die wichtigsten zu nennen) und ioBroker ist das einzige System (vielleicht neben FEHM) mit dem ich einen Broadlink UP-Schalter mit einem FS20 Bewegungsmelder und einem Homematik Außensensor steuern kann oder mein Kellerlicht das aus FS20- und Homematic Geräten besteht (3 Sensoren, 3 Lampen) das kann ich fortsetzen.
IoBroker läuft bei mir schon 5 Jahren auf einem alten CSL-NUC 24x7 mit noch altem Linux und wird nur mit neuer Software versorgt wenn auf einem Testrechner (VM am PC) mit derselben SW-Konfiguration alles funktioniert. Ich fahre deshalb noch immer nicht js-controller 3.x weil andere Adapter Probleme mit neueren Versionen von node oder js-controller haben. Meine Frau würde würde nicht akzeptieren wenn irgend ein Licht nicht schaltet weil Alexa grad keine Verbindung hat oder wieder mal re-bootet weil es neue Software aufspielt! -
2020-06-20 11:06:33.113 - warn: broadlink2.0 (8123) Error in StateChange for broadlink2.0.RM:RM4-pro-e4-8b-94._LearnRF = TypeError: command.tostring is not a functionat RM4P.sendPacket (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:552:70)at async RM4P.enterRFSweep (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:972:21)at async RM4P.learnRf (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:996:9)at async startLearning (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink2.js:109:54)das ist jetzt das Ergebnis
-
@SchuetzeSchulz
Meinst du so was?Die Art wie ich es mache ist:
All das will ich später in der neuen Konfig (inklusive anlernen) einbauen, das wird aber noch einige Tage/Wochen dauern!
Mein Ziel ist dass unter broadlink.0.L gelernt wird, mit Unterverzeichnissen für die einzelnen Geräte. Diese können dann auch in der Konfig mit-abgespeichert werden und somit auch zwischen rechnern transferiert werden.Wenn das mal funktioniert will ich dann importieren können, auch von anderen Web-quellen wo solche codes verfügbar sind. Die Original Broadlink-Cloud wird mir wohl verwehrt sein wenn keiner die broadlink-app am handy knackt
-
@Dischro
Sorry, habe mit tostring (statt toString) auch einen Fehler eingebaut und jetzt auf Git behoben... -
@frankjoke
er bleibt jetzt beim Start RF Sweep hängen2020-06-20 11:20:51.625 - warn: broadlink2.0 (8986) Error in StateChange for broadlink2.0.RM:RM4-pro-e4-8b-94._LearnRF = RangeError: toString() radix argument must be between 2 and 36at Number.toString ()at RM4P.sendPacket (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:552:70)at async RM4P.enterRFSweep (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:972:21)at async RM4P.learnRf (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:996:9)at async startLearning (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink2.js:109:54) 2020-06-20 11:23:55.309 - warn: broadlink2.0 (8986) Device RM:RM4-pro-e4-8b-94 is still in learning mode and cannot start it again! 2020-06-20 11:23:55.316 - warn: broadlink2.0 (8986) Error in StateChange for broadlink2.0.RM:RM4-pro-e4-8b-94._LearnRF = Error: Device RM:RM4-pro-e4-8b-94 is still in learning mode and cannot start it again!at startLearning (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink2.js:104:10)at A.stateChange (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink2.js:202:50)at Immediate. (/opt/iobroker/node_modules/iobroker.broadlink2/fjadapter.js:221:24)at processImmediate (internal/timers.js:456:21) -
broadlink2.0 2020-06-20 13:36:10.976 warn (25555) Error in StateChange for broadlink2.0.RM:Broadlink_RM4Pro._LearnRF = RangeError: toString() radix argument must be between 2 and 36at Number.toString (<anonymous>)at RM4P.sendPacket (/opt/iob broadlink2.0 2020-06-20 13:36:10.398 info (25555) Start RF-sweep with RM:Broadlink_RM4Pro: Please press button on RF remote until frequency found!Das macht meiner mit der neuen Version auf GIT
und....bleibt im Learningmode und lernt keine RF.
Adapterneustart = reset. IR learning funktioniert wieder.broadlink2.0 2020-06-20 13:41:05.784 warn (25555) Error in StateChange for broadlink2.0.RM:Broadlink_RM4Pro._Learn = Error: Device RM:Broadlink_RM4Pro is still in learning mode and cannot start it again!at startLearning (/opt/iobroker/node_m broadlink2.0 2020-06-20 13:41:05.783 warn (25555) Device RM:Broadlink_RM4Pro is still in learning mode and cannot start it again! -
@muckel
Verflixt, mit toString() auf eine Zahl braucht toString(16) für Hex-Ausgabe und auf einen buffer toString('hex')!
Das nennt man hard learning
Auf git korrigiert! -
Ergebnis:
Keine Orange LED für Anlernmodus. Allerdings wieder frei nach der eingestellten Zeit.
RF-Learning nicht erfolgreich.broadlink2.0 2020-06-20 14:22:47.955 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de broadlink2.0 2020-06-20 14:22:47.768 info (4762) Could not find frequency, will stop learning! broadlink2.0 2020-06-20 14:22:47.768 info (4762) Continue to press button on RF remote for maximal 1 seconds! broadlink2.0 2020-06-20 14:22:47.767 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de broadlink2.0 2020-06-20 14:22:46.606 info (4762) Continue to press button on RF remote for maximal 2 seconds! broadlink2.0 2020-06-20 14:22:46.605 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de broadlink2.0 2020-06-20 14:22:45.434 info (4762) Continue to press button on RF remote for maximal 3 seconds! broadlink2.0 2020-06-20 14:22:45.433 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de broadlink2.0 2020-06-20 14:22:44.277 info (4762) Continue to press button on RF remote for maximal 4 seconds! broadlink2.0 2020-06-20 14:22:44.277 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de broadlink2.0 2020-06-20 14:22:43.122 info (4762) Continue to press button on RF remote for maximal 5 seconds! broadlink2.0 2020-06-20 14:22:43.121 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de broadlink2.0 2020-06-20 14:22:41.964 info (4762) Continue to press button on RF remote for maximal 6 seconds! broadlink2.0 2020-06-20 14:22:41.963 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de broadlink2.0 2020-06-20 14:22:40.804 info (4762) Continue to press button on RF remote for maximal 7 seconds! broadlink2.0 2020-06-20 14:22:40.803 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de broadlink2.0 2020-06-20 14:22:39.648 info (4762) Continue to press button on RF remote for maximal 8 seconds! broadlink2.0 2020-06-20 14:22:39.647 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:38.493 info (4762) Continue to press button on RF remote for maximal 9 seconds! broadlink2.0 2020-06-20 14:22:38.492 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:37.249 info (4762) Continue to press button on RF remote for maximal 10 seconds! broadlink2.0 2020-06-20 14:22:37.248 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:36.075 info (4762) Continue to press button on RF remote for maximal 11 seconds! broadlink2.0 2020-06-20 14:22:36.074 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:34.897 info (4762) Continue to press button on RF remote for maximal 12 seconds! broadlink2.0 2020-06-20 14:22:34.896 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:33.740 info (4762) Continue to press button on RF remote for maximal 13 seconds! broadlink2.0 2020-06-20 14:22:33.740 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:32.584 info (4762) Continue to press button on RF remote for maximal 14 seconds! broadlink2.0 2020-06-20 14:22:32.584 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:31.410 info (4762) Continue to press button on RF remote for maximal 15 seconds! broadlink2.0 2020-06-20 14:22:31.409 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:30.250 info (4762) Continue to press button on RF remote for maximal 16 seconds! broadlink2.0 2020-06-20 14:22:30.250 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:29.091 info (4762) Continue to press button on RF remote for maximal 17 seconds! broadlink2.0 2020-06-20 14:22:29.090 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:27.913 info (4762) Continue to press button on RF remote for maximal 18 seconds! broadlink2.0 2020-06-20 14:22:27.912 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:26.733 info (4762) Continue to press button on RF remote for maximal 19 seconds! broadlink2.0 2020-06-20 14:22:26.732 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:25.577 info (4762) Continue to press button on RF remote for maximal 20 seconds! broadlink2.0 2020-06-20 14:22:25.576 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:24.381 info (4762) Continue to press button on RF remote for maximal 21 seconds! broadlink2.0 2020-06-20 14:22:24.381 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:23.225 info (4762) Continue to press button on RF remote for maximal 22 seconds! broadlink2.0 2020-06-20 14:22:23.224 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:22.022 info (4762) Continue to press button on RF remote for maximal 23 seconds! broadlink2.0 2020-06-20 14:22:22.021 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:20.859 info (4762) Continue to press button on RF remote for maximal 24 seconds! broadlink2.0 2020-06-20 14:22:20.858 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:19.700 info (4762) Continue to press button on RF remote for maximal 25 seconds! broadlink2.0 2020-06-20 14:22:19.700 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:18.545 info (4762) Continue to press button on RF remote for maximal 26 seconds! broadlink2.0 2020-06-20 14:22:18.544 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:17.325 info (4762) Continue to press button on RF remote for maximal 27 seconds! broadlink2.0 2020-06-20 14:22:17.324 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:16.136 info (4762) Continue to press button on RF remote for maximal 28 seconds! broadlink2.0 2020-06-20 14:22:16.136 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:14.982 info (4762) Continue to press button on RF remote for maximal 29 seconds! broadlink2.0 2020-06-20 14:22:14.981 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:13.826 info (4762) Continue to press button on RF remote for maximal 30 seconds! broadlink2.0 2020-06-20 14:22:13.825 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:12.668 info (4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d broadlink2.0 2020-06-20 14:22:12.451 info (4762) Start RF-sweep with RM:Broadlink_RM4Pro: Please press button on RF remote until frequency found! broadlink2.0 2020-06-20 14:21:54.853 info (4762) found macs: 24:df:a7:d3:27:57, 24:df:a7:7a:b0:5f broadlink2.0 2020-06-20 14:21:54.853 info (4762) broadlink2.0 started and found 2 devices named RM:Broadlink_RM4Pro, RM:Broadlink_RM3Mini broadlink2.0 2020-06-20 14:21:48.633 info (4762) Device RM:Broadlink_RM3Mini dedected: address=192.168.0.140, mac=24:df:a7:7a:b0:5f, typ=rm4, id=0x5f36 devtype=RM Mini 3 broadlink2.0 2020-06-20 14:21:48.626 info (4762) Device RM:Broadlink_RM4Pro dedected: address=192.168.0.141, mac=24:df:a7:d3:27:57, typ=rm4p, id=0x6026 devtype=rm4p broadlink2.0 2020-06-20 14:21:48.488 info (4762) discover [ '192.168.0.255', '255.255.255.255', '224.0.0.251' ] from 192.168.0.230:38036 broadlink2.0 2020-06-20 14:21:48.433 info (4762) Discover Broadlink devices for 10sec on broadlink2.0 broadlink2.0 2020-06-20 14:21:48.431 info (4762) macObjects: [ '24:df:a7:7a:b0:5f', '24:df:a7:d3:27:57' ] broadlink2.0 2020-06-20 14:21:48.430 info (4762) Devices to rename: broadlink2.0 2020-06-20 14:21:48.430 info (4762) Devices to add: [ [Array] ] 0x6026=rm4p broadlink2.0 2020-06-20 14:21:48.429 info (4762) Scanning additional IP's: broadlink2.0 2020-06-20 14:21:48.427 info (4762) broadlink2 initialization started... broadlink2.0 2020-06-20 14:21:48.335 info (4762) starting. Version 2.1.0 in /opt/iobroker/node_modules/iobroker.broadlink2, node: v12.16.2, js-controller: 3.1.5 broadlink2.0 2020-06-20 14:21:44.016 info (2035) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason broadlink2.0 2020-06-20 14:21:44.016 info (2035) terminating broadlink2.0 2020-06-20 14:21:44.016 info (2035) Adapter disconnected and stopped with dostop(null) and callback(true) broadlink2.0 2020-06-20 14:21:44.015 info (2035) Got terminate signal TERMINATE_YOURSELF -
Ok, habe gesehen dass der Befehl 0x6a gesendet wird und es scheinen die Daten für den RM4 anders liegen zu müssen als für die normalen RM's. habe das RM4-Protokoll testweise angeglichen.
Allerdings hab ich keinen RM4P und kann nur RMP testen, das funktioniert noch...p.s.: Das kommt davon wenn man sourcecode von anderen glaubt, war auch bei der LB1 das selbe dass der Original Python-code nicht funktioniert hat und ich rausfinden musste was da faul ist.
-
Wird immer besser!
Orange LED kommt! Leider wird der Code noch immer nicht angelernt.
Wie gesagt, wurde der Code in der Cloud App gefunden und hat funktioniert.broadlink2.0 2020-06-20 14:48:41.973 info (21909) Could not find frequency, will stop learning! broadlink2.0 2020-06-20 14:48:41.973 info (21909) Continue to press button on RF remote for maximal 1 seconds! broadlink2.0 2020-06-20 14:48:40.917 info (21909) Continue to press button on RF remote for maximal 2 seconds! broadlink2.0 2020-06-20 14:48:39.882 info (21909) Continue to press button on RF remote for maximal 3 seconds! broadlink2.0 2020-06-20 14:48:38.852 info (21909) Continue to press button on RF remote for maximal 4 seconds! broadlink2.0 2020-06-20 14:48:37.816 info (21909) Continue to press button on RF remote for maximal 5 seconds! broadlink2.0 2020-06-20 14:48:36.782 info (21909) Continue to press button on RF remote for maximal 6 seconds! broadlink2.0 2020-06-20 14:48:35.735 info (21909) Continue to press button on RF remote for maximal 7 seconds! broadlink2.0 2020-06-20 14:48:34.706 info (21909) Continue to press button on RF remote for maximal 8 seconds! broadlink2.0 2020-06-20 14:48:33.665 info (21909) Continue to press button on RF remote for maximal 9 seconds! broadlink2.0 2020-06-20 14:48:32.634 info (21909) Continue to press button on RF remote for maximal 10 seconds! broadlink2.0 2020-06-20 14:48:31.600 info (21909) Continue to press button on RF remote for maximal 11 seconds! broadlink2.0 2020-06-20 14:48:30.567 info (21909) Continue to press button on RF remote for maximal 12 seconds! broadlink2.0 2020-06-20 14:48:29.535 info (21909) Continue to press button on RF remote for maximal 13 seconds! broadlink2.0 2020-06-20 14:48:28.495 info (21909) Continue to press button on RF remote for maximal 14 seconds! broadlink2.0 2020-06-20 14:48:27.466 info (21909) Continue to press button on RF remote for maximal 15 seconds! broadlink2.0 2020-06-20 14:48:26.425 info (21909) Continue to press button on RF remote for maximal 16 seconds! broadlink2.0 2020-06-20 14:48:25.395 info (21909) Continue to press button on RF remote for maximal 17 seconds! broadlink2.0 2020-06-20 14:48:24.357 info (21909) Continue to press button on RF remote for maximal 18 seconds! broadlink2.0 2020-06-20 14:48:23.326 info (21909) Continue to press button on RF remote for maximal 19 seconds! broadlink2.0 2020-06-20 14:48:22.298 info (21909) Continue to press button on RF remote for maximal 20 seconds! broadlink2.0 2020-06-20 14:48:21.269 info (21909) Continue to press button on RF remote for maximal 21 seconds! broadlink2.0 2020-06-20 14:48:20.234 info (21909) Continue to press button on RF remote for maximal 22 seconds! broadlink2.0 2020-06-20 14:48:19.198 info (21909) Continue to press button on RF remote for maximal 23 seconds! broadlink2.0 2020-06-20 14:48:18.164 info (21909) Continue to press button on RF remote for maximal 24 seconds! broadlink2.0 2020-06-20 14:48:17.129 info (21909) Continue to press button on RF remote for maximal 25 seconds! broadlink2.0 2020-06-20 14:48:15.996 info (21909) Continue to press button on RF remote for maximal 26 seconds! broadlink2.0 2020-06-20 14:48:14.973 info (21909) Continue to press button on RF remote for maximal 27 seconds! broadlink2.0 2020-06-20 14:48:13.938 info (21909) Continue to press button on RF remote for maximal 28 seconds! broadlink2.0 2020-06-20 14:48:12.890 info (21909) Continue to press button on RF remote for maximal 29 seconds! broadlink2.0 2020-06-20 14:48:11.860 info (21909) Continue to press button on RF remote for maximal 30 seconds! broadlink2.0 2020-06-20 14:48:10.617 info (21909) Start RF-sweep with RM:Broadlink_RM4Pro: Please press button on RF remote until frequency found! broadlink2.0 2020-06-20 14:47:46.752 info (21909) found macs: 24:df:a7:d3:27:57, 24:df:a7:7a:b0:5f broadlink2.0 2020-06-20 14:47:46.752 info (21909) broadlink2.0 started and found 2 devices named RM:Broadlink_RM4Pro, RM:Broadlink_RM3Mini broadlink2.0 2020-06-20 14:47:40.483 info (21909) Device RM:Broadlink_RM3Mini dedected: address=192.168.0.140, mac=24:df:a7:7a:b0:5f, typ=rm4, id=0x5f36 devtype=RM Mini 3 broadlink2.0 2020-06-20 14:47:40.419 info (21909) Device RM:Broadlink_RM4Pro dedected: address=192.168.0.141, mac=24:df:a7:d3:27:57, typ=rm4p, id=0x6026 devtype=RM4 Pro broadlink2.0 2020-06-20 14:47:40.278 info (21909) discover [ '192.168.0.255', '255.255.255.255', '224.0.0.251' ] from 192.168.0.230:55706 broadlink2.0 2020-06-20 14:47:40.226 info (21909) Discover Broadlink devices for 10sec on broadlink2.0 broadlink2.0 2020-06-20 14:47:40.224 info (21909) macObjects: [ '24:df:a7:7a:b0:5f', '24:df:a7:d3:27:57' ] broadlink2.0 2020-06-20 14:47:40.223 info (21909) Devices to rename: broadlink2.0 2020-06-20 14:47:40.223 info (21909) Devices to add: [] broadlink2.0 2020-06-20 14:47:40.222 info (21909) Scanning additional IP's: broadlink2.0 2020-06-20 14:47:40.220 info (21909) broadlink2 initialization started... broadlink2.0 2020-06-20 14:47:40.159 info (21909) starting. Version 2.1.0 in /opt/iobroker/node_modules/iobroker.broadlink2, node: v12.16.2, js-controller: 3.1.5
