UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?

[frankjoke]

@Dischro sagte in Adapter: broadlink2:

@frankjoke
Die Frage ging zwar nicht an mich, bei mir ist es die ID=0x61a2 und wird auch vom Adapter als RM4P erkannt, aber RF geht trotzdem nicht.

Auch dieser ist als RM4P bei mir drinnen, wird ein LearnRF im Objektbaum aufgebaut (um das zu sehen vielleicht vor dem nächsten restart löschen!)?

Ich habe leider keine neuen RM4P's zum testen, sonder nur nen RM2 Pro+.

Könnt ihr mal in den debug mode schalten und schauen was im log steht wenn ihr LearnRF drückt?

Habe mal 2 Tasten mir LearnRF angelernt, das schaut dann so aus:

2020-06-19 22:35:04.668  - info: broadlink2.0 (5372) Start RF-sweep with RM:Broadlink-RMPROPLUS-f4-53-11: Please press button on RF remote until frequency found!
2020-06-19 22:35:07.382  - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 30 seconds!
2020-06-19 22:35:08.652  - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 29 seconds!
2020-06-19 22:35:10.232  - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 28 seconds!
2020-06-19 22:35:11.362  - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 27 seconds!
2020-06-19 22:35:12.533  - info: broadlink2.0 (5372) found Frequency 1 of 2, you can release button now!
2020-06-19 22:35:13.536  - info: broadlink2.0 (5372) To complete learning single press button you want to lear now!
2020-06-19 22:35:14.791  - info: broadlink2.0 (5372) Please single press button you want to learn in next 9 seconds!
2020-06-19 22:35:16.211  - info: broadlink2.0 (5372) Please single press button you want to learn in next 8 seconds!
2020-06-19 22:35:17.644  - info: broadlink2.0 (5372) Please single press button you want to learn in next 7 seconds!
2020-06-19 22:35:18.772  - info: broadlink2.0 (5372) Please single press button you want to learn in next 6 seconds!
2020-06-19 22:35:20.297  - info: broadlink2.0 (5372) Found learned button!
2020-06-19 22:35:20.328  - info: broadlink2.0 (5372) Learned new RF Code RM:Broadlink-RMPROPLUS-f4-53-11 (hex): 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
2020-06-19 22:35:41.405  - info: broadlink2.0 (5372) Start RF-sweep with RM:Broadlink-RMPROPLUS-f4-53-11: Please press button on RF remote until frequency found!
2020-06-19 22:35:43.114  - info: broadlink2.0 (5372) Continue to press button on RF remote for maximal 30 seconds!
2020-06-19 22:35:44.145  - info: broadlink2.0 (5372) found Frequency 1 of 2, you can release button now!
2020-06-19 22:35:45.148  - info: broadlink2.0 (5372) To complete learning single press button you want to lear now!
2020-06-19 22:35:46.449  - info: broadlink2.0 (5372) Found learned button!
2020-06-19 22:35:46.473  - info: broadlink2.0 (5372) Learned new RF Code RM:Broadlink-RMPROPLUS-f4-53-11 (hex): b100d00009200a2009200920092009200a1f0a1f0a20092009201e0b0a20092009201e0b0a1f1f0b09201e0b0a1f1e0b0a2009200a00013f0a1f0a200920092009200a200920092009200a1f09201e0c09200a1f0a1f1e0c09201e0b09201e0c09201e0b09200a1f0a0001400920092009200a200920092009200a1f0a1f0a2009201e0b0a1f0a1f0a201e0b09201e0b0a201e0b09201e0c09200920090001400a1f0a200920092009200a1f0a20092009200a1f0a1f1e0c092009200a1f1e0b0a201e0b0a1f1e0b0a201e0b1e0b1e0b0a0005dc0000000000000000

[Dischro]

@frankjoke
LearnRF vorher gelöscht und wurde wieder erstellt

broadlink2.0	2020-06-19 22:51:13.945	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:13.772	info	(2628) Could not find frequency, will stop learning!
broadlink2.0	2020-06-19 22:51:13.769	info	(2628) Continue to press button on RF remote for maximal 1 seconds!
broadlink2.0	2020-06-19 22:51:13.766	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:12.597	info	(2628) Continue to press button on RF remote for maximal 2 seconds!
broadlink2.0	2020-06-19 22:51:12.595	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:11.423	info	(2628) Continue to press button on RF remote for maximal 3 seconds!
broadlink2.0	2020-06-19 22:51:11.420	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:10.249	info	(2628) Continue to press button on RF remote for maximal 4 seconds!
broadlink2.0	2020-06-19 22:51:10.247	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:09.075	info	(2628) Continue to press button on RF remote for maximal 5 seconds!
broadlink2.0	2020-06-19 22:51:09.073	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:07.902	info	(2628) Continue to press button on RF remote for maximal 6 seconds!
broadlink2.0	2020-06-19 22:51:07.900	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:06.728	info	(2628) Continue to press button on RF remote for maximal 7 seconds!
broadlink2.0	2020-06-19 22:51:06.726	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:05.539	info	(2628) Continue to press button on RF remote for maximal 8 seconds!
broadlink2.0	2020-06-19 22:51:05.537	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:04.365	info	(2628) Continue to press button on RF remote for maximal 9 seconds!
broadlink2.0	2020-06-19 22:51:04.363	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:03.190	info	(2628) Continue to press button on RF remote for maximal 10 seconds!
broadlink2.0	2020-06-19 22:51:03.184	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:02.016	info	(2628) Continue to press button on RF remote for maximal 11 seconds!
broadlink2.0	2020-06-19 22:51:02.013	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:51:00.837	info	(2628) Continue to press button on RF remote for maximal 12 seconds!
broadlink2.0	2020-06-19 22:51:00.835	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:59.668	info	(2628) Continue to press button on RF remote for maximal 13 seconds!
broadlink2.0	2020-06-19 22:50:59.666	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:58.494	info	(2628) Continue to press button on RF remote for maximal 14 seconds!
broadlink2.0	2020-06-19 22:50:58.492	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:57.323	info	(2628) Continue to press button on RF remote for maximal 15 seconds!
broadlink2.0	2020-06-19 22:50:57.321	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:56.149	info	(2628) Continue to press button on RF remote for maximal 16 seconds!
broadlink2.0	2020-06-19 22:50:56.147	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:54.978	info	(2628) Continue to press button on RF remote for maximal 17 seconds!
broadlink2.0	2020-06-19 22:50:54.976	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:53.803	info	(2628) Continue to press button on RF remote for maximal 18 seconds!
broadlink2.0	2020-06-19 22:50:53.801	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:52.632	info	(2628) Continue to press button on RF remote for maximal 19 seconds!
broadlink2.0	2020-06-19 22:50:52.630	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:51.459	info	(2628) Continue to press button on RF remote for maximal 20 seconds!
broadlink2.0	2020-06-19 22:50:51.456	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:50.285	info	(2628) Continue to press button on RF remote for maximal 21 seconds!
broadlink2.0	2020-06-19 22:50:50.283	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:49.115	info	(2628) Continue to press button on RF remote for maximal 22 seconds!
broadlink2.0	2020-06-19 22:50:49.113	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:47.931	info	(2628) Continue to press button on RF remote for maximal 23 seconds!
broadlink2.0	2020-06-19 22:50:47.929	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:46.757	info	(2628) Continue to press button on RF remote for maximal 24 seconds!
broadlink2.0	2020-06-19 22:50:46.755	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:45.585	info	(2628) Continue to press button on RF remote for maximal 25 seconds!
broadlink2.0	2020-06-19 22:50:45.583	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:44.417	info	(2628) Continue to press button on RF remote for maximal 26 seconds!
broadlink2.0	2020-06-19 22:50:44.415	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:43.246	info	(2628) Continue to press button on RF remote for maximal 27 seconds!
broadlink2.0	2020-06-19 22:50:43.244	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:42.077	info	(2628) Continue to press button on RF remote for maximal 28 seconds!
broadlink2.0	2020-06-19 22:50:42.074	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:40.907	info	(2628) Continue to press button on RF remote for maximal 29 seconds!
broadlink2.0	2020-06-19 22:50:40.905	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:39.734	info	(2628) Continue to press button on RF remote for maximal 30 seconds!
broadlink2.0	2020-06-19 22:50:39.732	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:38.563	info	(2628) sendPacket error: could not send after 3 trials!: SendPacketErr {command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full'
broadlink2.0	2020-06-19 22:50:38.335	info	(2628) Start RF-sweep with RM:RM4-pro-e4-8b-94: Please press button on RF remote until frequency found!

[moj090]

@moj090 said in Adapter: broadlink2:

Hi @frankjoke,

ich habe mir zum testen mit meinem RM4 Pro RF Steckdosen auf Amazon bestellt und wenn ich RF Learn drücke passiert folgendes in den Logs:

broadlink2.0	2020-06-16 20:57:44.685	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:44.524	info	(19554) Could not find frequency, will stop learning!
broadlink2.0	2020-06-16 20:57:44.523	info	(19554) Continue to press button on RF remote for maximal 1 seconds!
broadlink2.0	2020-06-16 20:57:44.522	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:43.357	info	(19554) Continue to press button on RF remote for maximal 2 seconds!
broadlink2.0	2020-06-16 20:57:43.356	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:42.195	info	(19554) Continue to press button on RF remote for maximal 3 seconds!
broadlink2.0	2020-06-16 20:57:42.194	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:41.035	info	(19554) Continue to press button on RF remote for maximal 4 seconds!
broadlink2.0	2020-06-16 20:57:41.034	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:39.875	info	(19554) Continue to press button on RF remote for maximal 5 seconds!
broadlink2.0	2020-06-16 20:57:39.874	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:38.713	info	(19554) Continue to press button on RF remote for maximal 6 seconds!
broadlink2.0	2020-06-16 20:57:38.712	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:37.554	info	(19554) Continue to press button on RF remote for maximal 7 seconds!
broadlink2.0	2020-06-16 20:57:37.553	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:36.394	info	(19554) Continue to press button on RF remote for maximal 8 seconds!
broadlink2.0	2020-06-16 20:57:36.393	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:35.213	info	(19554) Continue to press button on RF remote for maximal 9 seconds!
broadlink2.0	2020-06-16 20:57:35.212	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:34.047	info	(19554) Continue to press button on RF remote for maximal 10 seconds!
broadlink2.0	2020-06-16 20:57:34.046	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:32.882	info	(19554) Continue to press button on RF remote for maximal 11 seconds!
broadlink2.0	2020-06-16 20:57:32.881	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:31.724	info	(19554) Continue to press button on RF remote for maximal 12 seconds!
broadlink2.0	2020-06-16 20:57:31.723	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:30.562	info	(19554) Continue to press button on RF remote for maximal 13 seconds!
broadlink2.0	2020-06-16 20:57:30.561	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:29.395	info	(19554) Continue to press button on RF remote for maximal 14 seconds!
broadlink2.0	2020-06-16 20:57:29.394	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:28.232	info	(19554) Continue to press button on RF remote for maximal 15 seconds!
broadlink2.0	2020-06-16 20:57:28.232	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:27.073	info	(19554) Continue to press button on RF remote for maximal 16 seconds!
broadlink2.0	2020-06-16 20:57:27.073	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:25.900	info	(19554) Continue to press button on RF remote for maximal 17 seconds!
broadlink2.0	2020-06-16 20:57:25.899	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:24.733	info	(19554) Continue to press button on RF remote for maximal 18 seconds!
broadlink2.0	2020-06-16 20:57:24.732	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:23.558	info	(19554) Continue to press button on RF remote for maximal 19 seconds!
broadlink2.0	2020-06-16 20:57:23.557	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:22.397	info	(19554) Continue to press button on RF remote for maximal 20 seconds!
broadlink2.0	2020-06-16 20:57:22.396	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:21.237	info	(19554) Continue to press button on RF remote for maximal 21 seconds!
broadlink2.0	2020-06-16 20:57:21.236	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:20.075	info	(19554) Continue to press button on RF remote for maximal 22 seconds!
broadlink2.0	2020-06-16 20:57:20.075	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:18.916	info	(19554) Continue to press button on RF remote for maximal 23 seconds!
broadlink2.0	2020-06-16 20:57:18.915	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:17.754	info	(19554) Continue to press button on RF remote for maximal 24 seconds!
broadlink2.0	2020-06-16 20:57:17.753	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:16.594	info	(19554) Continue to press button on RF remote for maximal 25 seconds!
broadlink2.0	2020-06-16 20:57:16.593	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:15.357	info	(19554) Continue to press button on RF remote for maximal 26 seconds!
broadlink2.0	2020-06-16 20:57:15.356	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:14.190	info	(19554) Continue to press button on RF remote for maximal 27 seconds!
broadlink2.0	2020-06-16 20:57:14.189	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:13.026	info	(19554) Continue to press button on RF remote for maximal 28 seconds!
broadlink2.0	2020-06-16 20:57:13.026	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:11.866	info	(19554) Continue to press button on RF remote for maximal 29 seconds!
broadlink2.0	2020-06-16 20:57:11.865	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:10.707	info	(19554) Continue to press button on RF remote for maximal 30 seconds!
broadlink2.0	2020-06-16 20:57:10.706	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:09.538	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:57:09.319	info	(19554) Start RF-sweep with RM:RM4: Please press button on RF remote until mfrequency found!
broadlink2.0	2020-06-16 20:10:45.230	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:45.073	info	(19554) Could not find frequency, will stop learning!
broadlink2.0	2020-06-16 20:10:45.072	info	(19554) Continue to press button on RF remote for maximal 1 seconds!
broadlink2.0	2020-06-16 20:10:45.071	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:43.910	info	(19554) Continue to press button on RF remote for maximal 2 seconds!
broadlink2.0	2020-06-16 20:10:43.909	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:42.750	info	(19554) Continue to press button on RF remote for maximal 3 seconds!
broadlink2.0	2020-06-16 20:10:42.749	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:41.575	info	(19554) Continue to press button on RF remote for maximal 4 seconds!
broadlink2.0	2020-06-16 20:10:41.574	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:40.415	info	(19554) Continue to press button on RF remote for maximal 5 seconds!
broadlink2.0	2020-06-16 20:10:40.415	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:39.255	info	(19554) Continue to press button on RF remote for maximal 6 seconds!
broadlink2.0	2020-06-16 20:10:39.254	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:38.093	info	(19554) Continue to press button on RF remote for maximal 7 seconds!
broadlink2.0	2020-06-16 20:10:38.092	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:36.936	info	(19554) Continue to press button on RF remote for maximal 8 seconds!
broadlink2.0	2020-06-16 20:10:36.935	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:35.776	info	(19554) Continue to press button on RF remote for maximal 9 seconds!
broadlink2.0	2020-06-16 20:10:35.775	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:34.613	info	(19554) Continue to press button on RF remote for maximal 10 seconds!
broadlink2.0	2020-06-16 20:10:34.612	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:33.447	info	(19554) Continue to press button on RF remote for maximal 11 seconds!
broadlink2.0	2020-06-16 20:10:33.447	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:32.287	info	(19554) Continue to press button on RF remote for maximal 12 seconds!
broadlink2.0	2020-06-16 20:10:32.286	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:31.125	info	(19554) Continue to press button on RF remote for maximal 13 seconds!
broadlink2.0	2020-06-16 20:10:31.125	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:29.966	info	(19554) Continue to press button on RF remote for maximal 14 seconds!
broadlink2.0	2020-06-16 20:10:29.965	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:28.795	info	(19554) Continue to press button on RF remote for maximal 15 seconds!
broadlink2.0	2020-06-16 20:10:28.795	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:27.599	info	(19554) Continue to press button on RF remote for maximal 16 seconds!
broadlink2.0	2020-06-16 20:10:27.598	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:26.438	info	(19554) Continue to press button on RF remote for maximal 17 seconds!
broadlink2.0	2020-06-16 20:10:26.438	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:25.279	info	(19554) Continue to press button on RF remote for maximal 18 seconds!
broadlink2.0	2020-06-16 20:10:25.278	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:24.119	info	(19554) Continue to press button on RF remote for maximal 19 seconds!
broadlink2.0	2020-06-16 20:10:24.118	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:22.958	info	(19554) Continue to press button on RF remote for maximal 20 seconds!
broadlink2.0	2020-06-16 20:10:22.957	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:21.797	info	(19554) Continue to press button on RF remote for maximal 21 seconds!
broadlink2.0	2020-06-16 20:10:21.796	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:20.633	info	(19554) Continue to press button on RF remote for maximal 22 seconds!
broadlink2.0	2020-06-16 20:10:20.632	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:19.470	info	(19554) Continue to press button on RF remote for maximal 23 seconds!
broadlink2.0	2020-06-16 20:10:19.469	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:18.309	info	(19554) Continue to press button on RF remote for maximal 24 seconds!
broadlink2.0	2020-06-16 20:10:18.308	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:17.149	info	(19554) Continue to press button on RF remote for maximal 25 seconds!
broadlink2.0	2020-06-16 20:10:17.148	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:15.986	info	(19554) Continue to press button on RF remote for maximal 26 seconds!
broadlink2.0	2020-06-16 20:10:15.985	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:14.825	info	(19554) Continue to press button on RF remote for maximal 27 seconds!
broadlink2.0	2020-06-16 20:10:14.824	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:13.663	info	(19554) Continue to press button on RF remote for maximal 28 seconds!
broadlink2.0	2020-06-16 20:10:13.660	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:12.501	info	(19554) Continue to press button on RF remote for maximal 29 seconds!
broadlink2.0	2020-06-16 20:10:12.500	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:11.339	info	(19554) Continue to press button on RF remote for maximal 30 seconds!
broadlink2.0	2020-06-16 20:10:11.338	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:10.177	info	(19554) sendPacket error: could not send after 3 trials!: SendPacketErr { command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The device storage is full
broadlink2.0	2020-06-16 20:10:09.955	info	(19554) Start RF-sweep with RM:RM4: Please press button on RF remote until mfrequency found!

Woran kann das liegen?

Danke und Gruß
moJO

Der gleiche Fehler auch bei mir mit dem RM4P. RF Anlernen über den normalen Learn Button funktioniert bei mir auch nicht.

Gruß
moJO

[P-A-L-A-D-I-N]

@frankjoke

Die e-Control App hatte ich früher mal auf dem Telefon und sie dann zugunsten der IHC (zunächst nicht "für EU") runtergeworfen, weil diese wohl die neuere / bessere sein sollte und die alte(n) App(s) nicht mehr weiterentwickelt werden sollten. So war zumindest damals das Credo im Netz bez. der vielen verschiedenen Broadlink-Apps, die im Umlauf sind.

Bin dann zuletzt von IHC (normal) zu IHC für EU umgestiegen, um auch die Alexa-Einbindung (Alexa Skillverknüpfung) nutzen zu können, wenn der ioBroker mal wieder herumzicken sollte (was bei mir aktuell leider schon wieder der Fall ist).

Womit wir auch schon gleich beim wesentlichen Punkt wären: Mit der e-Control App geht das ja vermutlich nicht, oder? Sofern e-Control die direkte Alexa-Einbindung nicht unterstützt, würde ich daher nur ungern von der IHC-App weggehen. Verstehe auch nicht, weshalb die App überhaupt solche Probleme macht - der RM Mini 3 ist doch jetzt nicht wirklich neu...?!

[frankjoke]

@Dischro
@moj090
Das schaut nicht gut aus! Das Gerät meldet diesen Fehler: 'The device storage is full' aber ich kann nciht lokalisieren auf welchen Befehl!

Habe in jetziger Git-Version eine zusätzliche >Info eingebaut wo der Befehl angezeigt werden soll, kannst das mal damit checken?

Die bisherigen RM's werden abgefragt (verschiedene Befehle) ob sie die Frequenz erkannt haben und dann ob sie die Taste erkannt haben. Aber hier tritt der Fehler anscheinend am Anfang schon auf.

p.s.: Hatte gestern als ich dazu schon antworten wollte einen Internetausfall meines Providers, alles - DSL und mobile Daten - ist ausgefallen und ich konnte weder posten noch ein git update machen. Jetzt ist die erweiterte info auf git.

[SchuetzeSchulz]

@frankjoke Kannst Du vielleicht nochmal eine kleine Anleitung posten wie man genau vorgeht um die schaltbaren States anzulegen?

[frankjoke]

@P-A-L-A-D-I-N sagte in Adapter: broadlink2:

@frankjoke

Womit wir auch schon gleich beim wesentlichen Punkt wären: Mit der e-Control App geht das ja vermutlich nicht, oder? Sofern e-Control die direkte Alexa-Einbindung nicht unterstützt, würde ich daher nur ungern von der IHC-App weggehen. Verstehe auch nicht, weshalb die App überhaupt solche Probleme macht - der RM Mini 3 ist doch jetzt nicht wirklich neu...?!

Nein, die neue Broadlink cloud mit Alexa-support wird davon nicht unterstützt. Mir macht das nichts aus da ich ausschließlich über ioBroker mit Alexa kommuniziere und KEINE andere Alexa-App mit irgendwelchen Geräten im Haus kommunizieren lasse. Ein Grund hierfür ist dass ich verschiedene Technologien verwende die alle unterschiedliche Apps bräuchten (Phillips Hue, IKEA, Homematic, Broadlink, FS20, Bosch, Samsung, um nur die wichtigsten zu nennen) und ioBroker ist das einzige System (vielleicht neben FEHM) mit dem ich einen Broadlink UP-Schalter mit einem FS20 Bewegungsmelder und einem Homematik Außensensor steuern kann oder mein Kellerlicht das aus FS20- und Homematic Geräten besteht (3 Sensoren, 3 Lampen) das kann ich fortsetzen.
IoBroker läuft bei mir schon 5 Jahren auf einem alten CSL-NUC 24x7 mit noch altem Linux und wird nur mit neuer Software versorgt wenn auf einem Testrechner (VM am PC) mit derselben SW-Konfiguration alles funktioniert. Ich fahre deshalb noch immer nicht js-controller 3.x weil andere Adapter Probleme mit neueren Versionen von node oder js-controller haben. Meine Frau würde würde nicht akzeptieren wenn irgend ein Licht nicht schaltet weil Alexa grad keine Verbindung hat oder wieder mal re-bootet weil es neue Software aufspielt!

[Dischro]

@frankjoke

2020-06-20 11:06:33.113 - warn: broadlink2.0 (8123) Error in StateChange for broadlink2.0.RM:RM4-pro-e4-8b-94._LearnRF = TypeError: command.tostring is not a functionat RM4P.sendPacket (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:552:70)at async RM4P.enterRFSweep (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:972:21)at async RM4P.learnRf (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:996:9)at async startLearning (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink2.js:109:54)

das ist jetzt das Ergebnis

[frankjoke]

@SchuetzeSchulz
Meinst du so was?

Die Art wie ich es mache ist:

All das will ich später in der neuen Konfig (inklusive anlernen) einbauen, das wird aber noch einige Tage/Wochen dauern!
Mein Ziel ist dass unter broadlink.0.L gelernt wird, mit Unterverzeichnissen für die einzelnen Geräte. Diese können dann auch in der Konfig mit-abgespeichert werden und somit auch zwischen rechnern transferiert werden.

Wenn das mal funktioniert will ich dann importieren können, auch von anderen Web-quellen wo solche codes verfügbar sind. Die Original Broadlink-Cloud wird mir wohl verwehrt sein wenn keiner die broadlink-app am handy knackt

[frankjoke]

@Dischro
Sorry, habe mit tostring (statt toString) auch einen Fehler eingebaut und jetzt auf Git behoben...

[Dischro]

@frankjoke
er bleibt jetzt beim Start RF Sweep hängen

2020-06-20 11:20:51.625 - warn: broadlink2.0 (8986) Error in StateChange for broadlink2.0.RM:RM4-pro-e4-8b-94._LearnRF = RangeError: toString() radix argument must be between 2 and 36at Number.toString ()at RM4P.sendPacket (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:552:70)at async RM4P.enterRFSweep (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:972:21)at async RM4P.learnRf (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink_fj.js:996:9)at async startLearning (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink2.js:109:54)
2020-06-20 11:23:55.309 - warn: broadlink2.0 (8986) Device RM:RM4-pro-e4-8b-94 is still in learning mode and cannot start it again!
2020-06-20 11:23:55.316 - warn: broadlink2.0 (8986) Error in StateChange for broadlink2.0.RM:RM4-pro-e4-8b-94._LearnRF = Error: Device RM:RM4-pro-e4-8b-94 is still in learning mode and cannot start it again!at startLearning (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink2.js:104:10)at A.stateChange (/opt/iobroker/node_modules/iobroker.broadlink2/broadlink2.js:202:50)at Immediate. (/opt/iobroker/node_modules/iobroker.broadlink2/fjadapter.js:221:24)at processImmediate (internal/timers.js:456:21)

[muckel]

@frankjoke

broadlink2.0	2020-06-20 13:36:10.976	warn	(25555) Error in StateChange for broadlink2.0.RM:Broadlink_RM4Pro._LearnRF = RangeError: toString() radix argument must be between 2 and 36at Number.toString (<anonymous>)at RM4P.sendPacket (/opt/iob
broadlink2.0	2020-06-20 13:36:10.398	info	(25555) Start RF-sweep with RM:Broadlink_RM4Pro: Please press button on RF remote until frequency found!

Das macht meiner mit der neuen Version auf GIT

und....bleibt im Learningmode und lernt keine RF.
Adapterneustart = reset. IR learning funktioniert wieder.

broadlink2.0	2020-06-20 13:41:05.784	warn	(25555) Error in StateChange for broadlink2.0.RM:Broadlink_RM4Pro._Learn = Error: Device RM:Broadlink_RM4Pro is still in learning mode and cannot start it again!at startLearning (/opt/iobroker/node_m
broadlink2.0	2020-06-20 13:41:05.783	warn	(25555) Device RM:Broadlink_RM4Pro is still in learning mode and cannot start it again!

[frankjoke]

@muckel
Verflixt, mit toString() auf eine Zahl braucht toString(16) für Hex-Ausgabe und auf einen buffer toString('hex')!
Das nennt man hard learning Auf git korrigiert!

[muckel]

@frankjoke

Ergebnis:
Keine Orange LED für Anlernmodus. Allerdings wieder frei nach der eingestellten Zeit.
RF-Learning nicht erfolgreich.

broadlink2.0	2020-06-20 14:22:47.955	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de
broadlink2.0	2020-06-20 14:22:47.768	info	(4762) Could not find frequency, will stop learning!
broadlink2.0	2020-06-20 14:22:47.768	info	(4762) Continue to press button on RF remote for maximal 1 seconds!
broadlink2.0	2020-06-20 14:22:47.767	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de
broadlink2.0	2020-06-20 14:22:46.606	info	(4762) Continue to press button on RF remote for maximal 2 seconds!
broadlink2.0	2020-06-20 14:22:46.605	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de
broadlink2.0	2020-06-20 14:22:45.434	info	(4762) Continue to press button on RF remote for maximal 3 seconds!
broadlink2.0	2020-06-20 14:22:45.433	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de
broadlink2.0	2020-06-20 14:22:44.277	info	(4762) Continue to press button on RF remote for maximal 4 seconds!
broadlink2.0	2020-06-20 14:22:44.277	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de
broadlink2.0	2020-06-20 14:22:43.122	info	(4762) Continue to press button on RF remote for maximal 5 seconds!
broadlink2.0	2020-06-20 14:22:43.121	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de
broadlink2.0	2020-06-20 14:22:41.964	info	(4762) Continue to press button on RF remote for maximal 6 seconds!
broadlink2.0	2020-06-20 14:22:41.963	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de
broadlink2.0	2020-06-20 14:22:40.804	info	(4762) Continue to press button on RF remote for maximal 7 seconds!
broadlink2.0	2020-06-20 14:22:40.803	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The de
broadlink2.0	2020-06-20 14:22:39.648	info	(4762) Continue to press button on RF remote for maximal 8 seconds!
broadlink2.0	2020-06-20 14:22:39.647	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:38.493	info	(4762) Continue to press button on RF remote for maximal 9 seconds!
broadlink2.0	2020-06-20 14:22:38.492	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:37.249	info	(4762) Continue to press button on RF remote for maximal 10 seconds!
broadlink2.0	2020-06-20 14:22:37.248	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:36.075	info	(4762) Continue to press button on RF remote for maximal 11 seconds!
broadlink2.0	2020-06-20 14:22:36.074	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:34.897	info	(4762) Continue to press button on RF remote for maximal 12 seconds!
broadlink2.0	2020-06-20 14:22:34.896	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:33.740	info	(4762) Continue to press button on RF remote for maximal 13 seconds!
broadlink2.0	2020-06-20 14:22:33.740	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:32.584	info	(4762) Continue to press button on RF remote for maximal 14 seconds!
broadlink2.0	2020-06-20 14:22:32.584	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:31.410	info	(4762) Continue to press button on RF remote for maximal 15 seconds!
broadlink2.0	2020-06-20 14:22:31.409	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:30.250	info	(4762) Continue to press button on RF remote for maximal 16 seconds!
broadlink2.0	2020-06-20 14:22:30.250	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:29.091	info	(4762) Continue to press button on RF remote for maximal 17 seconds!
broadlink2.0	2020-06-20 14:22:29.090	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:27.913	info	(4762) Continue to press button on RF remote for maximal 18 seconds!
broadlink2.0	2020-06-20 14:22:27.912	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:26.733	info	(4762) Continue to press button on RF remote for maximal 19 seconds!
broadlink2.0	2020-06-20 14:22:26.732	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:25.577	info	(4762) Continue to press button on RF remote for maximal 20 seconds!
broadlink2.0	2020-06-20 14:22:25.576	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:24.381	info	(4762) Continue to press button on RF remote for maximal 21 seconds!
broadlink2.0	2020-06-20 14:22:24.381	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:23.225	info	(4762) Continue to press button on RF remote for maximal 22 seconds!
broadlink2.0	2020-06-20 14:22:23.224	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:22.022	info	(4762) Continue to press button on RF remote for maximal 23 seconds!
broadlink2.0	2020-06-20 14:22:22.021	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:20.859	info	(4762) Continue to press button on RF remote for maximal 24 seconds!
broadlink2.0	2020-06-20 14:22:20.858	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:19.700	info	(4762) Continue to press button on RF remote for maximal 25 seconds!
broadlink2.0	2020-06-20 14:22:19.700	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:18.545	info	(4762) Continue to press button on RF remote for maximal 26 seconds!
broadlink2.0	2020-06-20 14:22:18.544	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:17.325	info	(4762) Continue to press button on RF remote for maximal 27 seconds!
broadlink2.0	2020-06-20 14:22:17.324	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:16.136	info	(4762) Continue to press button on RF remote for maximal 28 seconds!
broadlink2.0	2020-06-20 14:22:16.136	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:14.982	info	(4762) Continue to press button on RF remote for maximal 29 seconds!
broadlink2.0	2020-06-20 14:22:14.981	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:13.826	info	(4762) Continue to press button on RF remote for maximal 30 seconds!
broadlink2.0	2020-06-20 14:22:13.825	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:12.668	info	(4762) sendPacket error: could not send command 0x6a after 3 trials!: SendPacketErr {cmd: 106,command: 238,cmdHex: '0xee',payload: <Buffer 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00>,err: 'The d
broadlink2.0	2020-06-20 14:22:12.451	info	(4762) Start RF-sweep with RM:Broadlink_RM4Pro: Please press button on RF remote until frequency found!
broadlink2.0	2020-06-20 14:21:54.853	info	(4762) found macs: 24:df:a7:d3:27:57, 24:df:a7:7a:b0:5f
broadlink2.0	2020-06-20 14:21:54.853	info	(4762) broadlink2.0 started and found 2 devices named RM:Broadlink_RM4Pro, RM:Broadlink_RM3Mini
broadlink2.0	2020-06-20 14:21:48.633	info	(4762) Device RM:Broadlink_RM3Mini dedected: address=192.168.0.140, mac=24:df:a7:7a:b0:5f, typ=rm4, id=0x5f36 devtype=RM Mini 3
broadlink2.0	2020-06-20 14:21:48.626	info	(4762) Device RM:Broadlink_RM4Pro dedected: address=192.168.0.141, mac=24:df:a7:d3:27:57, typ=rm4p, id=0x6026 devtype=rm4p
broadlink2.0	2020-06-20 14:21:48.488	info	(4762) discover [ '192.168.0.255', '255.255.255.255', '224.0.0.251' ] from 192.168.0.230:38036
broadlink2.0	2020-06-20 14:21:48.433	info	(4762) Discover Broadlink devices for 10sec on broadlink2.0
broadlink2.0	2020-06-20 14:21:48.431	info	(4762) macObjects: [ '24:df:a7:7a:b0:5f', '24:df:a7:d3:27:57' ]
broadlink2.0	2020-06-20 14:21:48.430	info	(4762) Devices to rename:
broadlink2.0	2020-06-20 14:21:48.430	info	(4762) Devices to add: [ [Array] ] 0x6026=rm4p
broadlink2.0	2020-06-20 14:21:48.429	info	(4762) Scanning additional IP's:
broadlink2.0	2020-06-20 14:21:48.427	info	(4762) broadlink2 initialization started...
broadlink2.0	2020-06-20 14:21:48.335	info	(4762) starting. Version 2.1.0 in /opt/iobroker/node_modules/iobroker.broadlink2, node: v12.16.2, js-controller: 3.1.5
broadlink2.0	2020-06-20 14:21:44.016	info	(2035) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
broadlink2.0	2020-06-20 14:21:44.016	info	(2035) terminating
broadlink2.0	2020-06-20 14:21:44.016	info	(2035) Adapter disconnected and stopped with dostop(null) and callback(true)
broadlink2.0	2020-06-20 14:21:44.015	info	(2035) Got terminate signal TERMINATE_YOURSELF

[frankjoke]

@muckel

Ok, habe gesehen dass der Befehl 0x6a gesendet wird und es scheinen die Daten für den RM4 anders liegen zu müssen als für die normalen RM's. habe das RM4-Protokoll testweise angeglichen.
Allerdings hab ich keinen RM4P und kann nur RMP testen, das funktioniert noch...

p.s.: Das kommt davon wenn man sourcecode von anderen glaubt, war auch bei der LB1 das selbe dass der Original Python-code nicht funktioniert hat und ich rausfinden musste was da faul ist.

[muckel]

@frankjoke

Wird immer besser!
Orange LED kommt! Leider wird der Code noch immer nicht angelernt.
Wie gesagt, wurde der Code in der Cloud App gefunden und hat funktioniert.

broadlink2.0	2020-06-20 14:48:41.973	info	(21909) Could not find frequency, will stop learning!
broadlink2.0	2020-06-20 14:48:41.973	info	(21909) Continue to press button on RF remote for maximal 1 seconds!
broadlink2.0	2020-06-20 14:48:40.917	info	(21909) Continue to press button on RF remote for maximal 2 seconds!
broadlink2.0	2020-06-20 14:48:39.882	info	(21909) Continue to press button on RF remote for maximal 3 seconds!
broadlink2.0	2020-06-20 14:48:38.852	info	(21909) Continue to press button on RF remote for maximal 4 seconds!
broadlink2.0	2020-06-20 14:48:37.816	info	(21909) Continue to press button on RF remote for maximal 5 seconds!
broadlink2.0	2020-06-20 14:48:36.782	info	(21909) Continue to press button on RF remote for maximal 6 seconds!
broadlink2.0	2020-06-20 14:48:35.735	info	(21909) Continue to press button on RF remote for maximal 7 seconds!
broadlink2.0	2020-06-20 14:48:34.706	info	(21909) Continue to press button on RF remote for maximal 8 seconds!
broadlink2.0	2020-06-20 14:48:33.665	info	(21909) Continue to press button on RF remote for maximal 9 seconds!
broadlink2.0	2020-06-20 14:48:32.634	info	(21909) Continue to press button on RF remote for maximal 10 seconds!
broadlink2.0	2020-06-20 14:48:31.600	info	(21909) Continue to press button on RF remote for maximal 11 seconds!
broadlink2.0	2020-06-20 14:48:30.567	info	(21909) Continue to press button on RF remote for maximal 12 seconds!
broadlink2.0	2020-06-20 14:48:29.535	info	(21909) Continue to press button on RF remote for maximal 13 seconds!
broadlink2.0	2020-06-20 14:48:28.495	info	(21909) Continue to press button on RF remote for maximal 14 seconds!
broadlink2.0	2020-06-20 14:48:27.466	info	(21909) Continue to press button on RF remote for maximal 15 seconds!
broadlink2.0	2020-06-20 14:48:26.425	info	(21909) Continue to press button on RF remote for maximal 16 seconds!
broadlink2.0	2020-06-20 14:48:25.395	info	(21909) Continue to press button on RF remote for maximal 17 seconds!
broadlink2.0	2020-06-20 14:48:24.357	info	(21909) Continue to press button on RF remote for maximal 18 seconds!
broadlink2.0	2020-06-20 14:48:23.326	info	(21909) Continue to press button on RF remote for maximal 19 seconds!
broadlink2.0	2020-06-20 14:48:22.298	info	(21909) Continue to press button on RF remote for maximal 20 seconds!
broadlink2.0	2020-06-20 14:48:21.269	info	(21909) Continue to press button on RF remote for maximal 21 seconds!
broadlink2.0	2020-06-20 14:48:20.234	info	(21909) Continue to press button on RF remote for maximal 22 seconds!
broadlink2.0	2020-06-20 14:48:19.198	info	(21909) Continue to press button on RF remote for maximal 23 seconds!
broadlink2.0	2020-06-20 14:48:18.164	info	(21909) Continue to press button on RF remote for maximal 24 seconds!
broadlink2.0	2020-06-20 14:48:17.129	info	(21909) Continue to press button on RF remote for maximal 25 seconds!
broadlink2.0	2020-06-20 14:48:15.996	info	(21909) Continue to press button on RF remote for maximal 26 seconds!
broadlink2.0	2020-06-20 14:48:14.973	info	(21909) Continue to press button on RF remote for maximal 27 seconds!
broadlink2.0	2020-06-20 14:48:13.938	info	(21909) Continue to press button on RF remote for maximal 28 seconds!
broadlink2.0	2020-06-20 14:48:12.890	info	(21909) Continue to press button on RF remote for maximal 29 seconds!
broadlink2.0	2020-06-20 14:48:11.860	info	(21909) Continue to press button on RF remote for maximal 30 seconds!
broadlink2.0	2020-06-20 14:48:10.617	info	(21909) Start RF-sweep with RM:Broadlink_RM4Pro: Please press button on RF remote until frequency found!
broadlink2.0	2020-06-20 14:47:46.752	info	(21909) found macs: 24:df:a7:d3:27:57, 24:df:a7:7a:b0:5f
broadlink2.0	2020-06-20 14:47:46.752	info	(21909) broadlink2.0 started and found 2 devices named RM:Broadlink_RM4Pro, RM:Broadlink_RM3Mini
broadlink2.0	2020-06-20 14:47:40.483	info	(21909) Device RM:Broadlink_RM3Mini dedected: address=192.168.0.140, mac=24:df:a7:7a:b0:5f, typ=rm4, id=0x5f36 devtype=RM Mini 3
broadlink2.0	2020-06-20 14:47:40.419	info	(21909) Device RM:Broadlink_RM4Pro dedected: address=192.168.0.141, mac=24:df:a7:d3:27:57, typ=rm4p, id=0x6026 devtype=RM4 Pro
broadlink2.0	2020-06-20 14:47:40.278	info	(21909) discover [ '192.168.0.255', '255.255.255.255', '224.0.0.251' ] from 192.168.0.230:55706
broadlink2.0	2020-06-20 14:47:40.226	info	(21909) Discover Broadlink devices for 10sec on broadlink2.0
broadlink2.0	2020-06-20 14:47:40.224	info	(21909) macObjects: [ '24:df:a7:7a:b0:5f', '24:df:a7:d3:27:57' ]
broadlink2.0	2020-06-20 14:47:40.223	info	(21909) Devices to rename:
broadlink2.0	2020-06-20 14:47:40.223	info	(21909) Devices to add: []
broadlink2.0	2020-06-20 14:47:40.222	info	(21909) Scanning additional IP's:
broadlink2.0	2020-06-20 14:47:40.220	info	(21909) broadlink2 initialization started...
broadlink2.0	2020-06-20 14:47:40.159	info	(21909) starting. Version 2.1.0 in /opt/iobroker/node_modules/iobroker.broadlink2, node: v12.16.2, js-controller: 3.1.5

[muckel]

@frankjoke

noch ein log im debug modus

broadlink2.0	2020-06-20 15:01:21.257	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro =
broadlink2.0	2020-06-20 15:01:21.256	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Could not find frequency, will stop learning!
broadlink2.0	2020-06-20 15:01:21.255	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 1 seconds!
broadlink2.0	2020-06-20 15:01:21.043	info	(9399) Could not find frequency, will stop learning!
broadlink2.0	2020-06-20 15:01:21.042	info	(9399) Continue to press button on RF remote for maximal 1 seconds!
broadlink2.0	2020-06-20 15:01:20.065	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 2 seconds!
broadlink2.0	2020-06-20 15:01:20.019	info	(9399) Continue to press button on RF remote for maximal 2 seconds!
broadlink2.0	2020-06-20 15:01:19.000	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 3 seconds!
broadlink2.0	2020-06-20 15:01:18.996	info	(9399) Continue to press button on RF remote for maximal 3 seconds!
broadlink2.0	2020-06-20 15:01:18.017	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 4 seconds!
broadlink2.0	2020-06-20 15:01:17.972	info	(9399) Continue to press button on RF remote for maximal 4 seconds!
broadlink2.0	2020-06-20 15:01:16.981	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 5 seconds!
broadlink2.0	2020-06-20 15:01:16.932	info	(9399) Continue to press button on RF remote for maximal 5 seconds!
broadlink2.0	2020-06-20 15:01:15.917	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 6 seconds!
broadlink2.0	2020-06-20 15:01:15.870	info	(9399) Continue to press button on RF remote for maximal 6 seconds!
broadlink2.0	2020-06-20 15:01:14.855	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 7 seconds!
broadlink2.0	2020-06-20 15:01:14.845	info	(9399) Continue to press button on RF remote for maximal 7 seconds!
broadlink2.0	2020-06-20 15:01:13.869	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 8 seconds!
broadlink2.0	2020-06-20 15:01:13.822	info	(9399) Continue to press button on RF remote for maximal 8 seconds!
broadlink2.0	2020-06-20 15:01:12.806	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 9 seconds!
broadlink2.0	2020-06-20 15:01:12.798	info	(9399) Continue to press button on RF remote for maximal 9 seconds!
broadlink2.0	2020-06-20 15:01:11.779	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 10 seconds!
broadlink2.0	2020-06-20 15:01:11.774	info	(9399) Continue to press button on RF remote for maximal 10 seconds!
broadlink2.0	2020-06-20 15:01:10.793	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 11 seconds!
broadlink2.0	2020-06-20 15:01:10.750	info	(9399) Continue to press button on RF remote for maximal 11 seconds!
broadlink2.0	2020-06-20 15:01:09.758	debug	(9399) system.adapter.admin.0: logging true
broadlink2.0	2020-06-20 15:01:08.707	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 13 seconds!
broadlink2.0	2020-06-20 15:01:08.703	info	(9399) Continue to press button on RF remote for maximal 13 seconds!
broadlink2.0	2020-06-20 15:01:07.689	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 14 seconds!
broadlink2.0	2020-06-20 15:01:07.678	info	(9399) Continue to press button on RF remote for maximal 14 seconds!
broadlink2.0	2020-06-20 15:01:06.660	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 15 seconds!
broadlink2.0	2020-06-20 15:01:06.654	info	(9399) Continue to press button on RF remote for maximal 15 seconds!
broadlink2.0	2020-06-20 15:01:05.638	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 16 seconds!
broadlink2.0	2020-06-20 15:01:05.630	info	(9399) Continue to press button on RF remote for maximal 16 seconds!
broadlink2.0	2020-06-20 15:01:04.599	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 17 seconds!
broadlink2.0	2020-06-20 15:01:04.596	info	(9399) Continue to press button on RF remote for maximal 17 seconds!
broadlink2.0	2020-06-20 15:01:03.649	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 18 seconds!
broadlink2.0	2020-06-20 15:01:03.565	info	(9399) Continue to press button on RF remote for maximal 18 seconds!
broadlink2.0	2020-06-20 15:01:02.547	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 19 seconds!
broadlink2.0	2020-06-20 15:01:02.540	info	(9399) Continue to press button on RF remote for maximal 19 seconds!
broadlink2.0	2020-06-20 15:01:01.518	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 20 seconds!
broadlink2.0	2020-06-20 15:01:01.507	info	(9399) Continue to press button on RF remote for maximal 20 seconds!
broadlink2.0	2020-06-20 15:01:00.477	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 21 seconds!
broadlink2.0	2020-06-20 15:01:00.471	info	(9399) Continue to press button on RF remote for maximal 21 seconds!
broadlink2.0	2020-06-20 15:00:59.447	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 22 seconds!
broadlink2.0	2020-06-20 15:00:59.441	info	(9399) Continue to press button on RF remote for maximal 22 seconds!
broadlink2.0	2020-06-20 15:00:58.406	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 23 seconds!
broadlink2.0	2020-06-20 15:00:58.402	info	(9399) Continue to press button on RF remote for maximal 23 seconds!
broadlink2.0	2020-06-20 15:00:57.356	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 24 seconds!
broadlink2.0	2020-06-20 15:00:57.351	info	(9399) Continue to press button on RF remote for maximal 24 seconds!
broadlink2.0	2020-06-20 15:00:56.315	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 25 seconds!
broadlink2.0	2020-06-20 15:00:56.311	info	(9399) Continue to press button on RF remote for maximal 25 seconds!
broadlink2.0	2020-06-20 15:00:55.283	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 26 seconds!
broadlink2.0	2020-06-20 15:00:55.279	info	(9399) Continue to press button on RF remote for maximal 26 seconds!
broadlink2.0	2020-06-20 15:00:54.248	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 27 seconds!
broadlink2.0	2020-06-20 15:00:54.239	info	(9399) Continue to press button on RF remote for maximal 27 seconds!
broadlink2.0	2020-06-20 15:00:53.211	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 28 seconds!
broadlink2.0	2020-06-20 15:00:53.204	info	(9399) Continue to press button on RF remote for maximal 28 seconds!
broadlink2.0	2020-06-20 15:00:52.575	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 29 seconds!
broadlink2.0	2020-06-20 15:00:52.570	debug	(9399) system.adapter.admin.0: logging false
broadlink2.0	2020-06-20 15:00:52.169	info	(9399) Continue to press button on RF remote for maximal 29 seconds!
broadlink2.0	2020-06-20 15:00:51.185	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Continue to press button on RF remote for maximal 30 seconds!
broadlink2.0	2020-06-20 15:00:51.140	info	(9399) Continue to press button on RF remote for maximal 30 seconds!
broadlink2.0	2020-06-20 15:00:49.904	info	(9399) debug: ChangeState ack:true of RM:Broadlink_RM4Pro = Start RF-sweep with RM:Broadlink_RM4Pro: Please press button on RF remote until frequency found!
broadlink2.0	2020-06-20 15:00:49.898	info	(9399) Start RF-sweep with RM:Broadlink_RM4Pro: Please press button on RF remote until frequency found!
broadlink2.0	2020-06-20 15:00:49.897	info	}
broadlink2.0	2020-06-20 15:00:49.897	info	(9399) debug: Change broadlink2.0.RM:Broadlink_RM4Pro._LearnRF to { val: false, ack: false, ts: 1592658049893, q: 0, from: 'system.adapter.admin.0', user: 'system.user.admin', lc: 1592658049893
broadlink2.0	2020-06-20 15:00:06.367	debug	(9399) system.adapter.admin.0: logging true

[muckel]

@frankjoke

So, Hab noch etwas herausgefunden.
Wenn der RF-learning aktiv ist bleibt die orange LED 30 sekunden auf on. Kein RF signal von mir ausgesendet!
Wenn ich im RF-learning die FB kontinuierlich drücke, geht die LED nach einer gewissen zeit aus. wie wenn er einen code empfangen hätte. Die zeit im Adapter läuft weiter. Code findet er im Adapter allerdings keinen.

[frankjoke]

@muckel

Genau das wars was gefehlt während dieser 30 Sekunden sucht er die Frequenz und jede Sekunde fragt der Adapter ob sie gefunden wurde. Wenn ja war das der Zeitpunkt als die Led ausging, der Adapter bekam das aber anscheinend nicht mit, habe eine kleine Änderung gemacht damit der Adapter die Antwort eventuell besser interpretiert... Anscheinend ist die Antwort bei R auf git!

[muckel]

@frankjoke

Du bist ein Genie! Funktioniert!
Wie ist deine PayPal Adresse, damit ich dich auf ein Bier einladen kann!