Test Adapter HeatingControl v2.12.x
-
@Rene_HM Ja ich habe die Thermostate mit den dazugehörigen Fenster Sensoren konfiguriert. Wie meinst du das gesamte log?
-
@HoffmannOs sagte in Test Adapter HeatingControl v0.3.x:
ich habe die Thermostate mit den dazugehörigen Fenster Sensoren konfiguriert
aber Aktoren hast du keine konfiguriert??
Wie meinst du das gesamte log?
naja, du filterst und zeigst hier nur den Fehler vom hm-rpc. Wenn du aber den heatingcontrol adapter auf debug schaltest, und dann das log um den Fehler herum postest (bitte nicht als screenshot), würde ich sehen, an welcher stelle der Fehler passiert. Vielleicht hilft uns das weiter... Den Fehler selbst hatte ich schon mal irgendwo gesehen. hattest du hier im thread mal danach gesucht?
-
@Rene_HM
Nein Aktoren keine! -
Das ist der Aktuelle Log dazu
heatingcontrol.0 2020-02-29 13:11:27.099 debug (12496) ### state change already handled: false / false /// hm-rpc.1.OEQ1431500.1.STATE / hm-rpc.1.OEQ1431500.1.STATE heatingcontrol.0 2020-02-29 13:11:27.099 debug (12496) ### handle state change hm-rpc.1.OEQ1431500.1.STATE {"val":false,"ack":true,"ts":1582978287093,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1582978283016} hm-rpc.1 2020-02-29 13:11:27.092 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_STOP_YEAR ==> UNIT: "year" (min: 0, max: 100) From "0" => "0" hm-rpc.1 2020-02-29 13:11:27.092 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_STOP_YEAR",0] hm-rpc.1 2020-02-29 13:11:27.092 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_STOP_YEAR,0 hm-rpc.1 2020-02-29 13:11:27.092 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_STOP_MONTH ==> UNIT: "month" (min: 1, max: 12) From "1" => "1" hm-rpc.1 2020-02-29 13:11:27.092 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_STOP_MONTH",1] hm-rpc.1 2020-02-29 13:11:27.092 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_STOP_MONTH,1 hm-rpc.1 2020-02-29 13:11:27.092 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_STOP_DAY ==> UNIT: "day" (min: 1, max: 31) From "1" => "1" hm-rpc.1 2020-02-29 13:11:27.092 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_STOP_DAY",1] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_STOP_DAY,1 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_STOP_TIME ==> UNIT: "minutes" (min: 0, max: 1410) From "0" => "0" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_STOP_TIME",0] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_STOP_TIME,0 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_START_YEAR ==> UNIT: "year" (min: 0, max: 100) From "0" => "0" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_START_YEAR",0] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_START_YEAR,0 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_START_MONTH ==> UNIT: "month" (min: 1, max: 12) From "1" => "1" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_START_MONTH",1] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_START_MONTH,1 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_START_DAY ==> UNIT: "day" (min: 1, max: 31) From "1" => "1" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_START_DAY",1] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_START_DAY,1 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_START_TIME ==> UNIT: "minutes" (min: 0, max: 1410) From "0" => "0" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_START_TIME",0] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_START_TIME,0 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.PARTY_TEMPERATURE ==> UNIT: "°C" (min: 5, max: 30) From "5" => "5" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","PARTY_TEMPERATURE",5] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,PARTY_TEMPERATURE,5 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.SET_TEMPERATURE ==> UNIT: "°C" (min: 4.5, max: 30.5) From "4.5" => "4.5" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","SET_TEMPERATURE",4.5] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,SET_TEMPERATURE,4.5 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.BOOST_STATE ==> UNIT: "min" (min: 0, max: 30) From "0" => "0" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","BOOST_STATE",0] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,BOOST_STATE,0 hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) hm-rpc.1.MEQ0055220.4.FAULT_REPORTING ==> UNIT: "" (min: 0, max: 7) From "0" => "0" hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","FAULT_REPORTING",0] hm-rpc.1 2020-02-29 13:11:27.091 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,FAULT_REPORTING,0 hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) hm-rpc.1.MEQ0055220.4.CONTROL_MODE ==> UNIT: "" (min: 0, max: 3) From "0" => "0" hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:4","CONTROL_MODE",0] hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:4,CONTROL_MODE,0 hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) hm-rpc.1.MEQ0055220.0.UNREACH ==> UNIT: "" (min: false, max: true) From "false" => "false" hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:0","UNREACH",false] hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:0,UNREACH,false hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) hm-rpc.1.OEQ1431500.1.LOWBAT ==> UNIT: "" (min: false, max: true) From "false" => "false" hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) xmlrpc <- event ["hm-rpc.1","OEQ1431500:1","LOWBAT",false] hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) xml multicall <event>: hm-rpc.1,OEQ1431500:1,LOWBAT,false hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) hm-rpc.1.OEQ1431500.1.STATE ==> UNIT: "" (min: false, max: true) From "false" => "false" hm-rpc.1 2020-02-29 13:11:27.090 debug (12507) xmlrpc <- event ["hm-rpc.1","OEQ1431500:1","STATE",false] hm-rpc.1 2020-02-29 13:11:27.089 debug (12507) xml multicall <event>: hm-rpc.1,OEQ1431500:1,STATE,false hm-rpc.1 2020-02-29 13:11:27.080 error (12507) Error: XML-RPC fault: Failure hm-rpc.1 2020-02-29 13:11:27.080 error (12507) xmlrpc -> setValue ["4","SET_TEMPERATURE",18] FLOAT hm-rpc.1 2020-02-29 13:11:27.078 debug (12507) hm-rpc.1.MEQ0055220.0.STICKY_UNREACH ==> UNIT: "" (min: false, max: true) From "true" => "true" hm-rpc.1 2020-02-29 13:11:27.078 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:0","STICKY_UNREACH",true] hm-rpc.1 2020-02-29 13:11:27.078 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:0,STICKY_UNREACH,true hm-rpc.1 2020-02-29 13:11:27.078 debug (12507) hm-rpc.1.MEQ0055220.0.UNREACH ==> UNIT: "" (min: false, max: true) From "true" => "true" hm-rpc.1 2020-02-29 13:11:27.077 debug (12507) xmlrpc <- event ["hm-rpc.1","MEQ0055220:0","UNREACH",true] hm-rpc.1 2020-02-29 13:11:27.077 debug (12507) xml multicall <event>: hm-rpc.1,MEQ0055220:0,UNREACH,true heatingcontrol.0 2020-02-29 13:11:23.079 debug (12496) [INFO] status = true next event: 1 Mar 2020 05:00:00 heatingcontrol.0 2020-02-29 13:11:23.079 debug (12496) [INFO] status = true next event: 2 Mar 2020 05:00:00 heatingcontrol.0 2020-02-29 13:11:23.079 debug (12496) [INFO] status = true next event: 1 Mar 2020 12:00:00 heatingcontrol.0 2020-02-29 13:11:23.079 debug (12496) [INFO] status = true next event: 1 Mar 2020 08:00:00 heatingcontrol.0 2020-02-29 13:11:23.078 debug (12496) [INFO] status = true next event: 1 Mar 2020 00:00:00 heatingcontrol.0 2020-02-29 13:11:23.078 debug (12496) [INFO] status = true next event: 2 Mar 2020 08:00:00 heatingcontrol.0 2020-02-29 13:11:23.078 debug (12496) [INFO] status = true next event: 2 Mar 2020 00:00:00 heatingcontrol.0 2020-02-29 13:11:23.077 debug (12496) [INFO] status = true next event: 31 Mar 2020 23:55:00 heatingcontrol.0 2020-02-29 13:11:23.076 debug (12496) [INFO] status = true next event: 1 Oct 2020 00:05:00 hm-rpc.1 2020-02-29 13:11:23.072 debug (12507) setValue ["MEQ0055220:4","SET_TEMPERATURE",{"explicitDouble":18}] FLOAT hm-rpc.1 2020-02-29 13:11:23.072 debug (12507) xmlrpc -> setValue 4 SET_TEMPERATURE: 18 heatingcontrol.0 2020-02-29 13:11:23.072 debug (12496) thermostat hm-rpc.1.MEQ0055220.4.SET_TEMPERATURE to 18; current is 4.5 heatingcontrol.0 2020-02-29 13:11:23.069 info (12496) room Flur Thermostat target is 18 heatingcontrol.0 2020-02-29 13:11:23.069 info (12496) room Flur setting new target 18 heatingcontrol.0 2020-02-29 13:11:23.069 debug (12496) ### new target temp18 heatingcontrol.0 2020-02-29 13:11:23.069 debug (12496) ### current > 1 1 2 heatingcontrol.0 2020-02-29 13:11:23.069 debug (12496) Flur found period 1 with 18 on 08,00 heatingcontrol.0 2020-02-29 13:11:23.069 debug (12496) check time for Flur Profiles.0.Flur.Sa-So.Periods.1.time 18 heatingcontrol.0 2020-02-29 13:11:23.069 debug (12496) check ID Profiles.0.Flur.Sa-So.Periods.1.time heatingcontrol.0 2020-02-29 13:11:23.069 debug (12496) check time for Flur Profiles.0.Flur.Sa-So.Periods.0.time 18 heatingcontrol.0 2020-02-29 13:11:23.068 debug (12496) check ID Profiles.0.Flur.Sa-So.Periods.0.time heatingcontrol.0 2020-02-29 13:11:23.068 debug (12496) FindNextPeriod for 2/29/2020, 1:11:23 PM in Flur heatingcontrol.0 2020-02-29 13:11:23.068 debug (12496) absolute GuestIncrease {"val":0,"ack":true,"ts":1582568943810,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582568943810} heatingcontrol.0 2020-02-29 13:11:23.068 debug (12496) absolute AbsentDecrease {"val":0,"ack":true,"ts":1582568943861,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582568943861} heatingcontrol.0 2020-02-29 13:11:23.067 debug (12496) absolute PartyDecrease {"val":0,"ack":true,"ts":1582568943816,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582568943816} heatingcontrol.0 2020-02-29 13:11:23.067 debug (12496) absolute VacationAbsentDecrease {"val":0,"ack":true,"ts":1582568943863,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582568943863} heatingcontrol.0 2020-02-29 13:11:23.066 debug (12496) absolute WindowOpenDecrease {"val":4,"ack":true,"ts":1582673353569,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582673353568} heatingcontrol.0 2020-02-29 13:11:23.066 debug (12496) Flur window open is false heatingcontrol.0 2020-02-29 13:11:23.066 debug (12496) check room Flur heatingcontrol.0 2020-02-29 13:11:23.066 debug (12496) profile 0 heatingcontrol.0 2020-02-29 13:11:23.065 debug (12496) get profile heatingcontrol.0 2020-02-29 13:11:23.065 debug (12496) profile type 2 heatingcontrol.0 2020-02-29 13:11:23.024 debug (12496) ### not handled hm-rpc.1.OEQ1431500.1.STATE {"val":false,"ack":true,"ts":1582978283016,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1582978283016} heatingcontrol.0 2020-02-29 13:11:23.024 debug (12496) ### 222 not handled yet heatingcontrol.0 2020-02-29 13:11:23.024 info (12496) calculating new target temperatures heatingcontrol.0 2020-02-29 13:11:23.024 debug (12496) room to check is Flur -
@HoffmannOs das log sieht soweit gut aus. Aber ich habe die Stelle gefunden, wo das schon mal diskutiert wurde:
https://forum.iobroker.net/topic/22579/test-adapter-heatingcontrol-v0-3-x/208
Hier war anscheinend der duty-cycle das Problem... -
@Rene_HM Ich glaube fast das es auch was mit den IP geräten zutun hat. Immer die Meldung Float etc... obwohl die Geräte erreichbar sind.
-
@HoffmannOs was sagt denn dein duty cycle? Die Meldung deutet darauf hin, dass das Gerät nicht erreichbar ist...
-
@Rene_HM das sieht sonst immer gut aus, egal ob die States von den Scripten abgefragt werden, Änderungen der Zustände, Temperaturen etc. Keine Fehler soweit.
Edit :
Ich habe das nun nochmal beobachtet, bin da kein Profi... der Fehler tritt auf sobald ein Fenster geöffnet oder geschlossen wird, der Offset ist auf 4.5 eingestellt und sobald das fenster geschlossen wird, wird auch sofort der DutyCycle ausgelöst, steuere ich die Heizung über ein Script oder in der Homematic habe ich keine erhöte Auslösung.
-
@HoffmannOs dann schalte debug vom hm-rpc aus, lasse aber debug am heatingcontrol an. Starte heatingcontrol neu und öffne und schliesse das Fenster. Von diesem ganzen Vorgang hätte ich gern das log (ja, ich weiß, das sind viele Zeilen
) -
heatingcontrol.0 2020-03-04 13:14:04.477 debug (19068) [INFO] status = true next event: 7 Mar 2020 21:00:00 heatingcontrol.0 2020-03-04 13:14:04.477 debug (19068) [INFO] status = true next event: 7 Mar 2020 18:00:00 heatingcontrol.0 2020-03-04 13:14:04.476 debug (19068) [INFO] status = true next event: 7 Mar 2020 16:00:00 heatingcontrol.0 2020-03-04 13:14:04.476 debug (19068) [INFO] status = true next event: 7 Mar 2020 08:00:00 heatingcontrol.0 2020-03-04 13:14:04.476 debug (19068) [INFO] status = true next event: 7 Mar 2020 00:00:00 heatingcontrol.0 2020-03-04 13:14:04.475 debug (19068) [INFO] status = true next event: 4 Mar 2020 21:00:00 heatingcontrol.0 2020-03-04 13:14:04.474 debug (19068) [INFO] status = true next event: 4 Mar 2020 16:00:00 heatingcontrol.0 2020-03-04 13:14:04.474 debug (19068) [INFO] status = true next event: 5 Mar 2020 12:00:00 heatingcontrol.0 2020-03-04 13:14:04.474 debug (19068) [INFO] status = true next event: 5 Mar 2020 08:00:00 heatingcontrol.0 2020-03-04 13:14:04.473 debug (19068) [INFO] status = true next event: 5 Mar 2020 00:00:00 heatingcontrol.0 2020-03-04 13:14:04.473 debug (19068) [INFO] status = true next event: 31 Mar 2020 23:55:00 heatingcontrol.0 2020-03-04 13:14:04.472 debug (19068) [INFO] status = true next event: 1 Oct 2020 00:05:00 heatingcontrol.0 2020-03-04 13:14:04.468 debug (19068) thermostat hm-rpc.1.MEQ0055220.4.SET_TEMPERATURE to 19; current is 4.5 heatingcontrol.0 2020-03-04 13:14:04.465 info (19068) room Flur Thermostat hm-rpc.1.MEQ0055220.4.ACTUAL_TEMPERATURE target is 19 heatingcontrol.0 2020-03-04 13:14:04.465 info (19068) room Flur setting new target 19 heatingcontrol.0 2020-03-04 13:14:04.465 debug (19068) ### new target temp19 heatingcontrol.0 2020-03-04 13:14:04.465 debug (19068) ### current > 1 2 2 heatingcontrol.0 2020-03-04 13:14:04.465 debug (19068) Flur found period 2 with 19 on 12,00 heatingcontrol.0 2020-03-04 13:14:04.464 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.4.time heatingcontrol.0 2020-03-04 13:14:04.463 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.3.time heatingcontrol.0 2020-03-04 13:14:04.463 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.2.time 19 heatingcontrol.0 2020-03-04 13:14:04.463 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.2.time heatingcontrol.0 2020-03-04 13:14:04.463 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.1.time 19 heatingcontrol.0 2020-03-04 13:14:04.462 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.1.time heatingcontrol.0 2020-03-04 13:14:04.462 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.0.time 18 heatingcontrol.0 2020-03-04 13:14:04.415 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.0.time heatingcontrol.0 2020-03-04 13:14:04.415 debug (19068) FindNextPeriod for 3/4/2020, 1:14:04 PM in Flur heatingcontrol.0 2020-03-04 13:14:04.414 debug (19068) absolute GuestIncrease {"val":0,"ack":true,"ts":1582983059226,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059226} heatingcontrol.0 2020-03-04 13:14:04.414 debug (19068) absolute AbsentDecrease {"val":0,"ack":true,"ts":1582983059321,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059321} heatingcontrol.0 2020-03-04 13:14:04.413 debug (19068) absolute PartyDecrease {"val":0,"ack":true,"ts":1582983059317,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059317} heatingcontrol.0 2020-03-04 13:14:04.408 debug (19068) absolute VacationAbsentDecrease {"val":0,"ack":true,"ts":1582983059324,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059324} heatingcontrol.0 2020-03-04 13:14:04.406 debug (19068) absolute WindowOpenDecrease {"val":4.5,"ack":true,"ts":1583036561847,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036561846} heatingcontrol.0 2020-03-04 13:14:04.405 debug (19068) Flur window open is false heatingcontrol.0 2020-03-04 13:14:04.405 debug (19068) check room Flur heatingcontrol.0 2020-03-04 13:14:04.405 debug (19068) profile 0 heatingcontrol.0 2020-03-04 13:14:04.405 debug (19068) get profile heatingcontrol.0 2020-03-04 13:14:04.404 debug (19068) profile type 2 heatingcontrol.0 2020-03-04 13:14:04.402 debug (19068) ### not handled hm-rpc.1.OEQ1431500.1.STATE {"val":false,"ack":true,"ts":1583324044398,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324044398} heatingcontrol.0 2020-03-04 13:14:04.402 debug (19068) ### 222 not handled yet heatingcontrol.0 2020-03-04 13:14:04.402 info (19068) calculating new target temperatures heatingcontrol.0 2020-03-04 13:14:04.402 debug (19068) room to check is Flur heatingcontrol.0 2020-03-04 13:14:04.400 debug (19068) Flur window open is false heatingcontrol.0 2020-03-04 13:14:04.400 debug (19068) got sensor state {"val":false,"ack":true,"ts":1583324044398,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324044398} from hm-rpc.1.OEQ1431500.1.STATE heatingcontrol.0 2020-03-04 13:14:04.399 debug (19068) got sensor state {"val":false,"ack":true,"ts":1583323146392,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583029065930} from hm-rpc.1.OEQ0429098.1.STATE heatingcontrol.0 2020-03-04 13:14:04.399 debug (19068) Check sensors for Flur heatingcontrol.0 2020-03-04 13:14:04.399 debug (19068) ### handle devices [{"id":8,"name":"Flur Rechts","OID_Current":"hm-rpc.1.OEQ1431500.1.STATE","isActive":true,"type":3,"room":"Flur"}] heatingcontrol.0 2020-03-04 13:14:04.399 debug (19068) handle id hm-rpc.1.OEQ1431500.1.STATE state {"val":false,"ack":true,"ts":1583324044398,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324044398} heatingcontrol.0 2020-03-04 13:14:04.399 debug (19068) ### 111 not handled yet heatingcontrol.0 2020-03-04 13:14:04.398 debug (19068) ### hm-rpc.1.OEQ1431500.1.STATE hm-rpc.1.OEQ1431500.1.STATE false true heatingcontrol.0 2020-03-04 13:14:04.398 debug (19068) ### handle state change hm-rpc.1.OEQ1431500.1.STATE {"val":false,"ack":true,"ts":1583324044398,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324044398} heatingcontrol.0 2020-03-04 13:13:55.327 debug (19068) ### state change already handled: true / true /// hm-rpc.1.OEQ1431500.1.STATE / hm-rpc.1.OEQ1431500.1.STATE heatingcontrol.0 2020-03-04 13:13:55.327 debug (19068) ### handle state change hm-rpc.1.OEQ1431500.1.STATE {"val":true,"ack":true,"ts":1583324035326,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743} heatingcontrol.0 2020-03-04 13:13:53.874 debug (19068) [INFO] status = true next event: 7 Mar 2020 21:00:00 heatingcontrol.0 2020-03-04 13:13:53.873 debug (19068) [INFO] status = true next event: 7 Mar 2020 18:00:00 heatingcontrol.0 2020-03-04 13:13:53.872 debug (19068) [INFO] status = true next event: 7 Mar 2020 16:00:00 heatingcontrol.0 2020-03-04 13:13:53.872 debug (19068) [INFO] status = true next event: 7 Mar 2020 08:00:00 heatingcontrol.0 2020-03-04 13:13:53.872 debug (19068) [INFO] status = true next event: 7 Mar 2020 00:00:00 heatingcontrol.0 2020-03-04 13:13:53.871 debug (19068) [INFO] status = true next event: 4 Mar 2020 21:00:00 heatingcontrol.0 2020-03-04 13:13:53.871 debug (19068) [INFO] status = true next event: 4 Mar 2020 16:00:00 heatingcontrol.0 2020-03-04 13:13:53.871 debug (19068) [INFO] status = true next event: 5 Mar 2020 12:00:00 heatingcontrol.0 2020-03-04 13:13:53.871 debug (19068) [INFO] status = true next event: 5 Mar 2020 08:00:00 heatingcontrol.0 2020-03-04 13:13:53.870 debug (19068) [INFO] status = true next event: 5 Mar 2020 00:00:00 heatingcontrol.0 2020-03-04 13:13:53.870 debug (19068) [INFO] status = true next event: 31 Mar 2020 23:55:00 heatingcontrol.0 2020-03-04 13:13:53.869 debug (19068) [INFO] status = true next event: 1 Oct 2020 00:05:00 heatingcontrol.0 2020-03-04 13:13:53.864 debug (19068) thermostat hm-rpc.1.MEQ0055220.4.SET_TEMPERATURE to 4.5; current is 19 heatingcontrol.0 2020-03-04 13:13:53.863 info (19068) room Flur Thermostat hm-rpc.1.MEQ0055220.4.ACTUAL_TEMPERATURE target is 4.5 heatingcontrol.0 2020-03-04 13:13:53.863 info (19068) room Flur setting new target 4.5 heatingcontrol.0 2020-03-04 13:13:53.863 info (19068) setting to reduced/increased temperature in Flur to 4.5 heatingcontrol.0 2020-03-04 13:13:53.863 debug (19068) ### current > 1 2 2 heatingcontrol.0 2020-03-04 13:13:53.862 debug (19068) Flur found period 2 with 19 on 12,00 heatingcontrol.0 2020-03-04 13:13:53.862 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.4.time heatingcontrol.0 2020-03-04 13:13:53.862 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.3.time heatingcontrol.0 2020-03-04 13:13:53.862 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.2.time 19 heatingcontrol.0 2020-03-04 13:13:53.861 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.2.time heatingcontrol.0 2020-03-04 13:13:53.861 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.1.time 19 heatingcontrol.0 2020-03-04 13:13:53.813 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.1.time heatingcontrol.0 2020-03-04 13:13:53.813 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.0.time 18 heatingcontrol.0 2020-03-04 13:13:53.812 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.0.time heatingcontrol.0 2020-03-04 13:13:53.811 debug (19068) FindNextPeriod for 3/4/2020, 1:13:53 PM in Flur heatingcontrol.0 2020-03-04 13:13:53.811 debug (19068) use window open decrease heatingcontrol.0 2020-03-04 13:13:53.811 debug (19068) absolute GuestIncrease {"val":0,"ack":true,"ts":1582983059226,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059226} heatingcontrol.0 2020-03-04 13:13:53.811 debug (19068) absolute AbsentDecrease {"val":0,"ack":true,"ts":1582983059321,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059321} heatingcontrol.0 2020-03-04 13:13:53.811 debug (19068) absolute PartyDecrease {"val":0,"ack":true,"ts":1582983059317,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059317} heatingcontrol.0 2020-03-04 13:13:53.810 debug (19068) absolute VacationAbsentDecrease {"val":0,"ack":true,"ts":1582983059324,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059324} heatingcontrol.0 2020-03-04 13:13:53.809 debug (19068) absolute WindowOpenDecrease {"val":4.5,"ack":true,"ts":1583036561847,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036561846} heatingcontrol.0 2020-03-04 13:13:53.808 debug (19068) Flur window open is true heatingcontrol.0 2020-03-04 13:13:53.808 debug (19068) check room Flur heatingcontrol.0 2020-03-04 13:13:53.808 debug (19068) profile 0 heatingcontrol.0 2020-03-04 13:13:53.808 debug (19068) get profile heatingcontrol.0 2020-03-04 13:13:53.808 debug (19068) profile type 2 heatingcontrol.0 2020-03-04 13:13:53.748 debug (19068) ### not handled hm-rpc.1.OEQ1431500.1.STATE {"val":true,"ack":true,"ts":1583324033743,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743} heatingcontrol.0 2020-03-04 13:13:53.748 debug (19068) ### 222 not handled yet heatingcontrol.0 2020-03-04 13:13:53.748 info (19068) calculating new target temperatures heatingcontrol.0 2020-03-04 13:13:53.748 debug (19068) room to check is Flur heatingcontrol.0 2020-03-04 13:13:53.747 debug (19068) Flur window open is true heatingcontrol.0 2020-03-04 13:13:53.747 info (19068) Flur window open on Flur Rechts heatingcontrol.0 2020-03-04 13:13:53.747 debug (19068) got sensor state {"val":true,"ack":true,"ts":1583324033743,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743} from hm-rpc.1.OEQ1431500.1.STATE heatingcontrol.0 2020-03-04 13:13:53.746 debug (19068) got sensor state {"val":false,"ack":true,"ts":1583323146392,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583029065930} from hm-rpc.1.OEQ0429098.1.STATE heatingcontrol.0 2020-03-04 13:13:53.746 debug (19068) Check sensors for Flur heatingcontrol.0 2020-03-04 13:13:53.745 debug (19068) ### handle devices [{"id":8,"name":"Flur Rechts","OID_Current":"hm-rpc.1.OEQ1431500.1.STATE","isActive":true,"type":3,"room":"Flur"}] heatingcontrol.0 2020-03-04 13:13:53.745 debug (19068) handle id hm-rpc.1.OEQ1431500.1.STATE state {"val":true,"ack":true,"ts":1583324033743,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743} heatingcontrol.0 2020-03-04 13:13:53.745 debug (19068) ### 111 not handled yet heatingcontrol.0 2020-03-04 13:13:53.745 debug (19068) ### hm-rpc.1.OEQ1431500.1.STATE true 1 heatingcontrol.0 2020-03-04 13:13:53.745 debug (19068) ### handle state change hm-rpc.1.OEQ1431500.1.STATE {"val":true,"ack":true,"ts":1583324033743,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583324033743} heatingcontrol.0 2020-03-04 13:13:47.494 debug (19068) #subscribtion finished heatingcontrol.0 2020-03-04 13:13:47.494 info (19068) subscribe Flur hm-rpc.1.OEQ1431500.1.STATE heatingcontrol.0 2020-03-04 13:13:47.493 info (19068) subscribe Flur hm-rpc.1.OEQ0429098.1.STATE heatingcontrol.0 2020-03-04 13:13:47.493 debug (19068) room not active or not available {"name":"Wohnzimmer","isActive":false,"WindowIsOpen":false} heatingcontrol.0 2020-03-04 13:13:47.493 debug (19068) room not active or not available {"name":"Schlafzimmer","isActive":false,"WindowIsOpen":false} heatingcontrol.0 2020-03-04 13:13:47.493 debug (19068) room not active or not available {"name":"Küche","isActive":false,"WindowIsOpen":false} heatingcontrol.0 2020-03-04 13:13:47.493 debug (19068) room not active or not available {"name":"Kinderzimmer","isActive":false,"WindowIsOpen":false} heatingcontrol.0 2020-03-04 13:13:47.493 debug (19068) room not active or not available {"name":"Badezimmer","isActive":false,"WindowIsOpen":false} heatingcontrol.0 2020-03-04 13:13:47.492 debug (19068) no subscribe Path2PartyNowDP heatingcontrol.0 2020-03-04 13:13:47.492 debug (19068) no subscribe Path2GuestsPresentDP heatingcontrol.0 2020-03-04 13:13:47.492 debug (19068) no subscribe Path2HolidayPresentDP heatingcontrol.0 2020-03-04 13:13:47.492 debug (19068) no subscribe Path2VacationDP heatingcontrol.0 2020-03-04 13:13:47.492 debug (19068) no subscribe Path2PresentDP heatingcontrol.0 2020-03-04 13:13:47.492 debug (19068) no subscribe Path2FeiertagAdapter heatingcontrol.0 2020-03-04 13:13:47.492 debug (19068) #start subscribtion heatingcontrol.0 2020-03-04 13:13:47.491 debug (19068) [INFO] status = true next event: 7 Mar 2020 21:00:00 heatingcontrol.0 2020-03-04 13:13:47.491 debug (19068) [INFO] status = true next event: 7 Mar 2020 18:00:00 heatingcontrol.0 2020-03-04 13:13:47.490 debug (19068) [INFO] status = true next event: 7 Mar 2020 16:00:00 heatingcontrol.0 2020-03-04 13:13:47.490 debug (19068) [INFO] status = true next event: 7 Mar 2020 08:00:00 heatingcontrol.0 2020-03-04 13:13:47.490 debug (19068) [INFO] status = true next event: 7 Mar 2020 00:00:00 heatingcontrol.0 2020-03-04 13:13:47.489 debug (19068) [INFO] status = true next event: 4 Mar 2020 21:00:00 heatingcontrol.0 2020-03-04 13:13:47.489 debug (19068) [INFO] status = true next event: 4 Mar 2020 16:00:00 heatingcontrol.0 2020-03-04 13:13:47.489 debug (19068) [INFO] status = true next event: 5 Mar 2020 12:00:00 heatingcontrol.0 2020-03-04 13:13:47.488 debug (19068) [INFO] status = true next event: 5 Mar 2020 08:00:00 heatingcontrol.0 2020-03-04 13:13:47.488 debug (19068) [INFO] status = true next event: 5 Mar 2020 00:00:00 heatingcontrol.0 2020-03-04 13:13:47.487 debug (19068) [INFO] status = true next event: 31 Mar 2020 23:55:00 heatingcontrol.0 2020-03-04 13:13:47.485 debug (19068) [INFO] status = true next event: 1 Oct 2020 00:05:00 heatingcontrol.0 2020-03-04 13:13:47.481 debug (19068) thermostat hm-rpc.1.MEQ0055220.4.SET_TEMPERATURE nothing to do, already 19 heatingcontrol.0 2020-03-04 13:13:47.480 info (19068) room Flur Thermostat hm-rpc.1.MEQ0055220.4.ACTUAL_TEMPERATURE target is 19 heatingcontrol.0 2020-03-04 13:13:47.480 info (19068) room Flur setting new target 19 heatingcontrol.0 2020-03-04 13:13:47.480 debug (19068) ### new target temp19 heatingcontrol.0 2020-03-04 13:13:47.479 debug (19068) ### current > 1 2 2 heatingcontrol.0 2020-03-04 13:13:47.479 debug (19068) Flur found period 2 with 19 on 12,00 heatingcontrol.0 2020-03-04 13:13:47.479 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.4.time heatingcontrol.0 2020-03-04 13:13:47.479 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.3.time heatingcontrol.0 2020-03-04 13:13:47.479 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.2.time 19 heatingcontrol.0 2020-03-04 13:13:47.478 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.2.time heatingcontrol.0 2020-03-04 13:13:47.478 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.1.time 19 heatingcontrol.0 2020-03-04 13:13:47.477 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.1.time heatingcontrol.0 2020-03-04 13:13:47.477 debug (19068) check time for Flur Profiles.0.Flur.Mo-Fr.Periods.0.time 18 heatingcontrol.0 2020-03-04 13:13:47.476 debug (19068) check ID Profiles.0.Flur.Mo-Fr.Periods.0.time heatingcontrol.0 2020-03-04 13:13:47.476 debug (19068) FindNextPeriod for 3/4/2020, 1:13:47 PM in Flur heatingcontrol.0 2020-03-04 13:13:47.473 debug (19068) absolute GuestIncrease {"val":0,"ack":true,"ts":1582983059226,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059226} heatingcontrol.0 2020-03-04 13:13:47.473 debug (19068) absolute AbsentDecrease {"val":0,"ack":true,"ts":1582983059321,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059321} heatingcontrol.0 2020-03-04 13:13:47.473 debug (19068) absolute PartyDecrease {"val":0,"ack":true,"ts":1582983059317,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059317} heatingcontrol.0 2020-03-04 13:13:47.472 debug (19068) absolute VacationAbsentDecrease {"val":0,"ack":true,"ts":1582983059324,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059324} heatingcontrol.0 2020-03-04 13:13:47.472 debug (19068) absolute WindowOpenDecrease {"val":4.5,"ack":true,"ts":1583036561847,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036561846} heatingcontrol.0 2020-03-04 13:13:47.471 debug (19068) Flur window open is false heatingcontrol.0 2020-03-04 13:13:47.471 debug (19068) check room Flur heatingcontrol.0 2020-03-04 13:13:47.471 debug (19068) profile 0 heatingcontrol.0 2020-03-04 13:13:47.471 debug (19068) get profile heatingcontrol.0 2020-03-04 13:13:47.471 debug (19068) profile type 2 heatingcontrol.0 2020-03-04 13:13:47.469 info (19068) calculating new target temperatures heatingcontrol.0 2020-03-04 13:13:47.468 info (19068) external states checked, done heatingcontrol.0 2020-03-04 13:13:47.468 debug (19068) checking Path2HolidayPresentDP heatingcontrol.0 2020-03-04 13:13:47.467 debug (19068) checking Path2PartyNowDP heatingcontrol.0 2020-03-04 13:13:47.467 debug (19068) checking Path2GuestsPresentDP heatingcontrol.0 2020-03-04 13:13:47.466 debug (19068) checking Path2VacationDP heatingcontrol.0 2020-03-04 13:13:47.466 debug (19068) checking Path2PresentDP heatingcontrol.0 2020-03-04 13:13:47.465 debug (19068) checking Path2FeiertagAdapter heatingcontrol.0 2020-03-04 13:13:47.465 info (19068) checking all external states heatingcontrol.0 2020-03-04 13:13:47.421 debug (19068) Flur window open is false heatingcontrol.0 2020-03-04 13:13:47.421 debug (19068) got sensor state {"val":false,"ack":true,"ts":1583323935127,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583323933426} from hm-rpc.1.OEQ1431500.1.STATE heatingcontrol.0 2020-03-04 13:13:47.418 debug (19068) got sensor state {"val":false,"ack":true,"ts":1583323146392,"q":0,"from":"system.adapter.hm-rpc.1","user":"system.user.admin","lc":1583029065930} from hm-rpc.1.OEQ0429098.1.STATE heatingcontrol.0 2020-03-04 13:13:47.416 debug (19068) Check sensors for Flur heatingcontrol.0 2020-03-04 13:13:47.415 debug (19068) [INFO] status = true next event: 7 Mar 2020 21:00:00 heatingcontrol.0 2020-03-04 13:13:47.415 debug (19068) [INFO] status = true next event: 7 Mar 2020 18:00:00 heatingcontrol.0 2020-03-04 13:13:47.414 debug (19068) [INFO] status = true next event: 7 Mar 2020 16:00:00 heatingcontrol.0 2020-03-04 13:13:47.413 debug (19068) [INFO] status = true next event: 7 Mar 2020 08:00:00 heatingcontrol.0 2020-03-04 13:13:47.413 debug (19068) [INFO] status = true next event: 7 Mar 2020 00:00:00 heatingcontrol.0 2020-03-04 13:13:47.413 debug (19068) [INFO] status = true next event: 4 Mar 2020 21:00:00 heatingcontrol.0 2020-03-04 13:13:47.412 debug (19068) [INFO] status = true next event: 4 Mar 2020 16:00:00 heatingcontrol.0 2020-03-04 13:13:47.412 debug (19068) [INFO] status = true next event: 5 Mar 2020 12:00:00 heatingcontrol.0 2020-03-04 13:13:47.411 debug (19068) [INFO] status = true next event: 5 Mar 2020 08:00:00 heatingcontrol.0 2020-03-04 13:13:47.411 debug (19068) [INFO] status = true next event: 5 Mar 2020 00:00:00 heatingcontrol.0 2020-03-04 13:13:47.411 debug (19068) [INFO] status = true next event: 31 Mar 2020 23:55:00 heatingcontrol.0 2020-03-04 13:13:47.409 debug (19068) [INFO] status = true next event: 1 Oct 2020 00:05:00 heatingcontrol.0 2020-03-04 13:13:47.406 debug (19068) create cron job #11 at 21:0 string: 0 0 21 * * 0,6 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.405 debug (19068) create cron job #10 at 18:0 string: 0 0 18 * * 0,6 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.404 debug (19068) create cron job #9 at 16:0 string: 0 0 16 * * 0,6 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.404 debug (19068) create cron job #8 at 8:0 string: 0 0 8 * * 0,6 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.403 debug (19068) create cron job #7 at 0:0 string: 0 0 0 * * 0,6 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.402 debug (19068) create cron job #6 at 21:0 string: 0 0 21 * * 1-5 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.401 debug (19068) create cron job #5 at 16:0 string: 0 0 16 * * 1-5 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.397 debug (19068) create cron job #4 at 12:0 string: 0 0 12 * * 1-5 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.396 debug (19068) create cron job #3 at 8:0 string: 0 0 8 * * 1-5 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.395 debug (19068) create cron job #2 at 0:0 string: 0 0 0 * * 1-5 Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.391 debug (19068) HeatingPeriod: create cron job #1 at 31.03 string: 55 23 31 2 * Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.385 debug (19068) HeatingPeriod: create cron job #0 at 01.10 string: 5 0 01 9 * Europe/Berlin heatingcontrol.0 2020-03-04 13:13:47.385 info (19068) check for heating period based on settings between 01.10. and 31.03. heatingcontrol.0 2020-03-04 13:13:47.385 debug (19068) push to list = 21,00 heatingcontrol.0 2020-03-04 13:13:47.385 debug (19068) ---2 found time for Flur at {"val":"21:00","ack":true,"ts":1583022670696,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583022670696} 21:00 heatingcontrol.0 2020-03-04 13:13:47.384 debug (19068) push to list = 18,00 heatingcontrol.0 2020-03-04 13:13:47.384 debug (19068) ---2 found time for Flur at {"val":"18:00","ack":true,"ts":1583036640094,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036640092} 18:00 heatingcontrol.0 2020-03-04 13:13:47.384 debug (19068) push to list = 16,00 heatingcontrol.0 2020-03-04 13:13:47.384 debug (19068) ---2 found time for Flur at {"val":"16:00","ack":true,"ts":1583036631338,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583036631335} 16:00 heatingcontrol.0 2020-03-04 13:13:47.383 debug (19068) push to list = 08,00 heatingcontrol.0 2020-03-04 13:13:47.383 debug (19068) ---2 found time for Flur at {"val":"08:00","ack":true,"ts":1582983059337,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059337} 08:00 heatingcontrol.0 2020-03-04 13:13:47.383 debug (19068) push to list = 00,00 heatingcontrol.0 2020-03-04 13:13:47.383 debug (19068) ---2 found time for Flur at {"val":"00:00","ack":true,"ts":1582983392726,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983392724} 00:00 heatingcontrol.0 2020-03-04 13:13:47.382 debug (19068) setting Sa - Su heatingcontrol.0 2020-03-04 13:13:47.382 debug (19068) push to list = 21,00 heatingcontrol.0 2020-03-04 13:13:47.382 debug (19068) ---1 found time for Flur at {"val":"21:00","ack":true,"ts":1583022670695,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583022670695} 21:00 heatingcontrol.0 2020-03-04 13:13:47.380 debug (19068) push to list = 16,00 heatingcontrol.0 2020-03-04 13:13:47.380 debug (19068) ---1 found time for Flur at {"val":"16:00","ack":true,"ts":1583022670695,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583022670695} 16:00 heatingcontrol.0 2020-03-04 13:13:47.380 debug (19068) push to list = 12,00 heatingcontrol.0 2020-03-04 13:13:47.380 debug (19068) ---1 found time for Flur at {"val":"12:00","ack":true,"ts":1583022670695,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1583022670695} 12:00 heatingcontrol.0 2020-03-04 13:13:47.379 debug (19068) push to list = 08,00 heatingcontrol.0 2020-03-04 13:13:47.379 debug (19068) ---1 found time for Flur at {"val":"08:00","ack":true,"ts":1582983059337,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983059337} 08:00 heatingcontrol.0 2020-03-04 13:13:47.378 debug (19068) push to list = 00,00 heatingcontrol.0 2020-03-04 13:13:47.377 debug (19068) ---1 found time for Flur at {"val":"00:00","ack":true,"ts":1582983369647,"q":0,"from":"system.adapter.heatingcontrol.0","user":"system.user.admin","lc":1582983369645} 00:00 heatingcontrol.0 2020-03-04 13:13:47.377 debug (19068) setting Mo - Fr heatingcontrol.0 2020-03-04 13:13:47.377 debug (19068) profile 0 heatingcontrol.0 2020-03-04 13:13:47.376 debug (19068) get profileDer Modus muss auf Manuell oder kann auf Auto gesetzt bleiben?
-
Mahlzeit, ich nutze HMIP Regler und auf diesen sind ja auch eigene Heizperioden gespeichert. Wie bekomm ich diese gelöscht das alles nur noch von Heating Control gesteuert wird?
-
@moppel2810 ich vermute, da gibt es einen manuell-Modus, wie bei den alten Wand-Thermostaten auch...
-
@HoffmannOs sagte in Test Adapter HeatingControl v0.3.x:
Der Modus muss auf Manuell oder kann auf Auto gesetzt bleiben?
auf manuell, wurde hier schon öfters berichtet und beschrieben.
Das log selbst sieht gut aus. Alles funktioniert, wie erwartet. Danach sieht man im log auch nichts weiter mehr (speziell, dass im log endlos etwas durchläuft)?
Was passiert, wenn du auf den MEQ0055220:4.SET_TEMPERATURE - Datenpunkt im iobroker Object-Baum einen Wert schreibst? Bekommst du dann den Fehler auch? -
@Rene_HM da kann ich nichts finden.
-
Hatte heute wieder das Problem das am Thermostat die temp eingestellt war die in ihm drin ist und nicht zu löschen geht. Ich möchte aber logischerweise nur mit heating control steuern und nicht ständig das da das interne Profil aktiv wird
-
Mahlzeit.
Ich habe leider nochmals eine Frage zum Override und zwar wie genau stelle ich den ein? Am Thermostat selber zu drehen, ändert den "State" nicht von normal auf override - sobald ich in der Zeile drunter bei "TemperaturOverride" eine Temperaur angebe ändert sich der "State" auf override.
Müsste sich doch normal auch ändern wenn ich eine Änderung am Thermostaten durchführe, oder über eine Homematic-App?Grüße
-
@moppel2810 hast du die Thermostate jetzt auf manuell? und immer noch das Problem?
-
@Voltage sagte in Test Adapter HeatingControl v0.3.x:
Müsste sich doch normal auch ändern wenn ich eine Änderung am Thermostaten durchführe, oder über eine Homematic-App?
müsste nicht, da es nicht implementiert ist. Override funktioniert nur, indem man eine Zit und einen Temperaturwert auf die entsprechenden Datenpunkte schreibt. Eine Änderung am Thermostat selbst wird aktuell wieder überschrieben.
Dazu gibt es übrigens bereits ein Ticket:https://github.com/rg-engineering/ioBroker.heatingcontrol/issues/70
closed Steuerung des Adapters über die Thermostate #70
-
@Rene_HM wie kann ich sie denn auf manuell stellen? Ich geh mal davon aus das ich das über die Raspi webui machen muß, oder?
-
@moppel2810 bei einem HMIP-eTRV-2 siehe Bedienungsanleitung https://files2.elv.com/public/14/1402/140280/Internet/140280_um.pdf
