Test Adapter mihome-vacuum v2.0.x
-
@Meistertr Hi, ja, läuft alles jetzt, keine Fehler
Dankeschön -
Hallo,
ich habe bei mir Valetudo installiert und einige Zonen angelegt.
Die online Anbindung habe ich per Firewall unterbunden, da ich schon 2x das Vergnügen hatte das sich der Gen1 auf eine neue FW geupdatet hat oder wie auch immer sich selber resetet hat.
Adapter 2.0.8 ist installiert, FW 3.3.9-003468 und Valetudo in 0.4.0.
Mir werden auch alle Daten und Infos angezeigt, nur leider die Karten oder Zonen nicht.
Was kann ich machen, würde so gerne über Alexa die einzelnen Zonen steuern. -
@jensus11 bitte auf debug stellen und mal Log hier posten
-
mihome-vacuum.0 2020-03-03 19:48:03.714 debug (15538) Receive <<< {"result":[{"msg_ver":8,"msg_seq":3338,"state":8,"battery":100,"clean_time":224,"clean_area":7165000,"error_code":0,"map_present":1,"in_cleaning":0,"fan_power":100,"dnd_enabled":0} mihome-vacuum.0 2020-03-03 19:48:03.708 debug (15538) sendMsg[1] >>> {"id":29,"method":"get_status"} mihome-vacuum.0 2020-03-03 19:47:50.191 warn (15538) Could not receive Mappointer, giving up mihome-vacuum.0 2020-03-03 19:47:50.191 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":28} mihome-vacuum.0 2020-03-03 19:47:50.182 debug (15538) 9. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:50.182 debug (15538) sendMsg[1] >>> {"id":28,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:49.681 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":27} mihome-vacuum.0 2020-03-03 19:47:49.662 debug (15538) 8. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:49.662 debug (15538) sendMsg[1] >>> {"id":27,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:49.160 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":26} mihome-vacuum.0 2020-03-03 19:47:49.156 debug (15538) 7. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:49.155 debug (15538) sendMsg[1] >>> {"id":26,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:48.654 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":25} mihome-vacuum.0 2020-03-03 19:47:48.642 debug (15538) 6. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:48.641 debug (15538) sendMsg[1] >>> {"id":25,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:48.141 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":24} mihome-vacuum.0 2020-03-03 19:47:48.117 debug (15538) 5. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:48.117 debug (15538) sendMsg[1] >>> {"id":24,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:47.616 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":23} mihome-vacuum.0 2020-03-03 19:47:47.610 debug (15538) 4. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:47.610 debug (15538) sendMsg[1] >>> {"id":23,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:47.109 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":22} mihome-vacuum.0 2020-03-03 19:47:47.105 debug (15538) 3. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:47.104 debug (15538) sendMsg[1] >>> {"id":22,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:46.607 debug (15538) CLEAN_LOGGING[{"Datum":"3.3","Start":"19:02","Saugzeit":"4 min","Fläche":"7.17 m²","Error":0,"Ende":false},{"Datum":"3.3","Start":"16:15","Saugzeit":"10 min","Fläche":"8.27 m²","Error":0,"Ende mihome-vacuum.0 2020-03-03 19:47:46.600 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":21} mihome-vacuum.0 2020-03-03 19:47:46.588 debug (15538) 2. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:46.588 debug (15538) sendMsg[1] >>> {"id":21,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:46.434 debug (15538) Receive <<< {"result":[[1577275556,1577275612,14,0,0,0]],"id":20} mihome-vacuum.0 2020-03-03 19:47:46.405 debug (15538) sendMsg[1] >>> {"id":20,"method":"get_clean_record","params":[1577275556]} mihome-vacuum.0 2020-03-03 19:47:46.210 debug (15538) Receive <<< {"result":[[1577705584,1577707390,1705,27040000,0,1]],"id":19} mihome-vacuum.0 2020-03-03 19:47:46.204 debug (15538) sendMsg[1] >>> {"id":19,"method":"get_clean_record","params":[1577705584]} mihome-vacuum.0 2020-03-03 19:47:46.086 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":18} mihome-vacuum.0 2020-03-03 19:47:46.024 debug (15538) Receive <<< {"result":[[1577707998,1577708227,229,4305000,0,1]],"id":17} mihome-vacuum.0 2020-03-03 19:47:46.008 debug (15538) 1. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:46.008 debug (15538) sendMsg[1] >>> {"id":18,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:46.004 debug (15538) sendMsg[1] >>> {"id":17,"method":"get_clean_record","params":[1577707998]} mihome-vacuum.0 2020-03-03 19:47:45.830 debug (15538) Receive <<< {"result":[[1577708513,1577708756,243,3115000,0,1]],"id":16} mihome-vacuum.0 2020-03-03 19:47:45.803 debug (15538) sendMsg[1] >>> {"id":16,"method":"get_clean_record","params":[1577708513]} mihome-vacuum.0 2020-03-03 19:47:45.617 debug (15538) Receive <<< {"result":[[1581150811,1581153929,3118,44420000,0,1]],"id":15} mihome-vacuum.0 2020-03-03 19:47:45.602 debug (15538) sendMsg[1] >>> {"id":15,"method":"get_clean_record","params":[1581150811]} mihome-vacuum.0 2020-03-03 19:47:45.508 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":14} mihome-vacuum.0 2020-03-03 19:47:45.491 debug (15538) 0. Mappointer_nomap___map_upload_handler mihome-vacuum.0 2020-03-03 19:47:45.491 debug (15538) sendMsg[1] >>> {"id":14,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:45.416 debug (15538) Receive <<< {"result":[[1582118288,1582120675,2387,39517500,0,1]],"id":13} mihome-vacuum.0 2020-03-03 19:47:45.401 debug (15538) sendMsg[1] >>> {"id":13,"method":"get_clean_record","params":[1582118288]} mihome-vacuum.0 2020-03-03 19:47:45.223 debug (15538) Receive <<< {"result":[[1583060389,1583063854,3465,54702500,0,1]],"id":12} mihome-vacuum.0 2020-03-03 19:47:45.201 debug (15538) sendMsg[1] >>> {"id":12,"method":"get_clean_record","params":[1583060389]} mihome-vacuum.0 2020-03-03 19:47:45.012 debug (15538) Receive <<< {"result":[[1583244883,1583245887,1004,17005000,0,1]],"id":11} mihome-vacuum.0 2020-03-03 19:47:44.999 debug (15538) sendMsg[1] >>> {"id":11,"method":"get_clean_record","params":[1583244883]} mihome-vacuum.0 2020-03-03 19:47:44.990 debug (15538) Receive <<< {"result":["map_upload_handler"],"id":10} mihome-vacuum.0 2020-03-03 19:47:44.984 debug (15538) sendMsg[1] >>> {"id":10,"method":"get_map_v1"} mihome-vacuum.0 2020-03-03 19:47:44.804 debug (15538) Receive <<< {"result":[[1583248554,1583249170,616,8267500,0,1]],"id":9} mihome-vacuum.0 2020-03-03 19:47:44.799 debug (15538) sendMsg[1] >>> {"id":9,"method":"get_clean_record","params":[1583248554]} mihome-vacuum.0 2020-03-03 19:47:44.794 debug (15538) Receive <<< {"result":"unknown_method","id":8} mihome-vacuum.0 2020-03-03 19:47:44.791 info (15538) create state for carpet_mode mihome-vacuum.0 2020-03-03 19:47:44.791 debug (15538) Receive <<< {"result":[{"enable":1,"current_integral":0,"current_high":0,"current_low":0,"stall_time":0}],"id":7} mihome-vacuum.0 2020-03-03 19:47:44.785 debug (15538) sendMsg[1] >>> {"id":8,"method":"get_room_mapping"} mihome-vacuum.0 2020-03-03 19:47:44.785 debug (15538) sendMsg[1] >>> {"id":7,"method":"get_carpet_mode"} mihome-vacuum.0 2020-03-03 19:47:44.615 debug (15538) Receive <<< {"result":[[1583258556,1583258934,224,7165000,0,0]],"id":6} mihome-vacuum.0 2020-03-03 19:47:44.598 debug (15538) sendMsg[1] >>> {"id":6,"method":"get_clean_record","params":[1583258556]} mihome-vacuum.0 2020-03-03 19:47:44.597 debug (15538) Receive <<< {"result":[397771,6147175000,265,[1583258556,1583248554,1583244883,1583060389,1582118288,1581150811,1577708513,1577707998,1577705584,1577275556]],"id":5} mihome-vacuum.0 2020-03-03 19:47:44.585 debug (15538) sendMsg[1] >>> {"id":5,"method":"get_clean_summary"} mihome-vacuum.0 2020-03-03 19:47:44.416 debug (15538) Receive <<< {"result":[{"main_brush_work_time":398002,"side_brush_work_time":398002,"filter_work_time":182552,"sensor_dirty_time":12991}],"id":4} mihome-vacuum.0 2020-03-03 19:47:44.384 debug (15538) sendMsg[1] >>> {"id":4,"method":"get_consumable"} mihome-vacuum.0 2020-03-03 19:47:44.238 info (15538) set nächster Timer: Nicht verfügbar mihome-vacuum.0 2020-03-03 19:47:44.192 debug (15538) Receive <<< {"result":[90],"id":3} mihome-vacuum.0 2020-03-03 19:47:44.185 debug (15538) sendMsg[1] >>> {"id":3,"method":"get_sound_volume"} mihome-vacuum.0 2020-03-03 19:47:44.157 error (15538) TypeError: Cannot read property 'id' of undefined mihome-vacuum.0 2020-03-03 19:47:44.128 debug (15538) 25444 mihome-vacuum.0 2020-03-03 19:47:44.011 debug (15538) Receive <<< {"partner_id":"","id":2,"code":0,"message":"ok","result":{"hw_ver":"Linux","fw_ver":"3.3.9_003468","ap":{"ssid":"Wlan","bssid":"21:9B:C2:F5:08:F7","rssi":-50},"netif":{"l mihome-vacuum.0 2020-03-03 19:47:43.986 debug (15538) Next WiFi check: 03.03 19:48 mihome-vacuum.0 2020-03-03 19:47:43.985 debug (15538) sendMsg[1] >>> {"id":2,"method":"miIO.info"} mihome-vacuum.0 2020-03-03 19:47:43.783 info (15538) Connected mihome-vacuum.0 2020-03-03 19:47:43.755 debug (15538) sendTo "getStatus" to system.adapter.mihome-vacuum.0 from system.adapter.mihome-vacuum.0 mihome-vacuum.0 2020-03-03 19:47:43.754 debug (15538) Receive <<< {"result":[{"msg_ver":8,"msg_seq":3337,"state":8,"battery":100,"clean_time":224,"clean_area":7165000,"error_code":0,"map_present":1,"in_cleaning":0,"fan_power":100,"dnd_enabled":0} mihome-vacuum.0 2020-03-03 19:47:43.740 debug (15538) sendMsg[1] >>> {"id":1,"method":"get_status"} mihome-vacuum.0 2020-03-03 19:47:43.732 debug (15538) sendTo "getStatus" to system.adapter.mihome-vacuum.0 from system.adapter.mihome-vacuum.0 mihome-vacuum.0 2020-03-03 19:47:43.731 info (15538) connecting, This can take up to 5 minutes ... mihome-vacuum.0 2020-03-03 19:47:43.731 warn (15538) Time difference between Mihome Vacuum and ioBroker: -90 sec mihome-vacuum.0 2020-03-03 19:47:43.730 debug (15538) Receive <<< Helo <<< 21310020000 mihome-vacuum.0 2020-03-03 19:47:43.720 info (15538) New generation or new fw(3.3.9,003468) detected, create new states goto and zoneclean mihome-vacuum.0 2020-03-03 19:47:43.711 debug (15538) server started on 0.0.0.0:53421 mihome-vacuum.0 2020-03-03 19:47:43.707 info (15538) Disconnect mihome-vacuum.0 2020-03-03 19:47:43.703 info (15538) Create state clean_home for controlling by cloud adapter mihome-vacuum.0 2020-03-03 19:47:43.703 info (15538) Expert mode enabled, states created mihome-vacuum.0 2020-03-03 19:47:43.696 debug (15538) load Map creator... true mihome-vacuum.0 2020-03-03 19:47:43.669 info (15538) starting. Version 2.0.8 in /opt/iobroker/node_modules/iobroker.mihome-vacuum, node: v10.19.0 mihome-vacuum.0 2020-03-03 19:47:39.709 info (10066) Terminated (START_IMMEDIATELY_AFTER_STOP): Without reason mihome-vacuum.0 2020-03-03 19:47:39.708 info (10066) terminating mihome-vacuum.0 2020-03-03 19:47:39.708 info (10066) Got terminate signal TERMINATE_YOURSELFNach Neustart des Adapters.
-
@jensus11 Hmmm, ich glaube, da muss @Meistertr meistertmal einen Blick drauf werfen. Aber das ist aktuell der Adapter von mir, nehme zur Sicherheit hat 2.0.7 vom offiziellen Community github.
-
Hatte 2.0.6 dann 2.0.7 und jetzt die von dir. Bei den anderen ging das auch nicht.
-
@jensus11 hast du valetudo in der config angeklickt? auf jedenfall hast du Xiaomi map mit angeklickt, was nicht sollte wenn du valetudo installiert hast
-
So habe ich das eingestellt.
-
@Meistertr sagte in Test Adapter mihome-vacuum v2.0.x:
@jensus11 hast du valetudo in der config angeklickt? auf jedenfall hast du Xiaomi map mit angeklickt, was nicht sollte wenn du valetudo installiert hast
Sollten wir dann da Radio Buttons von machen?
-
@dirkhe jep wollte da noch ein deselect mit einbauen das nur eins geht
-
Hallo nochmal,
ich habe nun Valetudo installiert und das webinterface funktioniert. Leider klappt die Bedienung über iobroker nicht. Es hat kurz funktioniert nun aber wieder nicht. Weder reagiert der Roboter zuverflässig auf Tastendrücke noch bekomme ich eine Karte angezeigt. Hier einmal ein Log:
mihome-vacuum.0 2020-03-03 21:32:51.728 debug (9962) requesting params every: 60 Sec mihome-vacuum.0 2020-03-03 21:32:43.764 info (9962) should trigger cleaning all null, but is currently active. Add to queue mihome-vacuum.0 2020-03-03 21:32:43.759 debug (9962) sendTo "startVacuuming" to system.adapter.mihome-vacuum.0 from system.adapter.mihome-vacuum.0 mihome-vacuum.0 2020-03-03 21:32:43.758 debug (9962) stateChange mihome-vacuum.0.control.start {"val":true,"ack":false,"ts":1583267563751,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1581065963877} mihome-vacuum.0 2020-03-03 21:32:42.738 debug (9962) stateChange mihome-vacuum.0.control.resumeRoomClean {"val":true,"ack":false,"ts":1583267562734,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1582918439862} mihome-vacuum.0 2020-03-03 21:32:39.365 debug (9962) stateChange mihome-vacuum.0.control.pause {"val":true,"ack":false,"ts":1583267559362,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1581066074377} mihome-vacuum.0 2020-03-03 21:32:33.774 debug (9962) no answer for get_consumable(id:19) received, giving up mihome-vacuum.0 2020-03-03 21:32:33.575 warn (9962) no answer received after after 3 times -> pause miIO.info from request parameters, try again in one hour mihome-vacuum.0 2020-03-03 21:32:33.574 debug (9962) no answer for miIO.info(id:18) received, giving up mihome-vacuum.0 2020-03-03 21:32:33.572 debug (9962) no answer for get_status(id:17) received, giving up mihome-vacuum.0 2020-03-03 21:32:30.061 debug (9962) stateChange mihome-vacuum.0.control.home {"val":true,"ack":false,"ts":1583267550058,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1581066090653} mihome-vacuum.0 2020-03-03 21:32:29.391 debug (9962) stateChange mihome-vacuum.0.control.home {"val":true,"ack":false,"ts":1583267549384,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1581066090653} mihome-vacuum.0 2020-03-03 21:32:28.387 debug (9962) stateChange mihome-vacuum.0.control.home {"val":true,"ack":false,"ts":1583267548380,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1581066090653} mihome-vacuum.0 2020-03-03 21:32:24.506 debug (9962) stateChange mihome-vacuum.0.control.home {"val":true,"ack":false,"ts":1583267544500,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1581066090653} mihome-vacuum.0 2020-03-03 21:32:23.564 debug (9962) no answer for get_status(id:16) received, giving up mihome-vacuum.0 2020-03-03 21:32:22.574 debug (9962) stateChange mihome-vacuum.0.control.resumeRoomClean {"val":true,"ack":false,"ts":1583267542571,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1582918439862} mihome-vacuum.0 2020-03-03 21:32:18.567 debug (9962) requesting params every: 60 Sec mihome-vacuum.0 2020-03-03 21:32:18.565 info (9962) Connected mihome-vacuum.0 2020-03-03 21:32:18.561 info (9962) Disconnect mihome-vacuum.0 2020-03-03 21:32:16.356 debug (9962) no answer for get_status(id:15) received, giving up mihome-vacuum.0 2020-03-03 21:32:14.354 debug (9962) no answer for undefined(id:14) received, giving up mihome-vacuum.0 2020-03-03 21:32:09.741 debug (9962) no answer for get_room_mapping(id:13) received, giving up mihome-vacuum.0 2020-03-03 21:32:09.730 debug (9962) no answer for get_carpet_mode(id:12) received, giving up mihome-vacuum.0 2020-03-03 21:32:09.679 debug (9962) system.adapter.admin.0: logging true mihome-vacuum.0 2020-03-03 21:32:08.412 debug (9962) CLEAN_LOGGING[{"Datum":"3.3","Start":"21:30","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"3.3","Start":"21:16","Saugzeit":"3 min","Fläche":"4.38 m²","Error":0,"Ende":fa mihome-vacuum.0 2020-03-03 21:32:08.210 debug (9962) no answer for get_clean_record(id:11) received, giving up mihome-vacuum.0 2020-03-03 21:32:06.558 info (9962) should trigger cleaning all null, but is currently active. Add to queue mihome-vacuum.0 2020-03-03 21:32:06.555 debug (9962) sendTo "startVacuuming" to system.adapter.mihome-vacuum.0 from system.adapter.mihome-vacuum.0 mihome-vacuum.0 2020-03-03 21:32:06.554 debug (9962) stateChange mihome-vacuum.0.control.start {"val":true,"ack":false,"ts":1583267526551,"q":0,"from":"system.adapter.web.0","user":"system.user.admin","lc":1581065963877} mihome-vacuum.0 2020-03-03 21:32:03.410 debug (9962) CLEAN_LOGGING[{"Datum":"3.3","Start":"21:30","Saugzeit":"0 min","Fläche":"0 m²","Error":0,"Ende":false},{"Datum":"3.3","Start":"21:16","Saugzeit":"3 min","Fläche":"4.38 m²","Error":0,"Ende":fa mihome-vacuum.0 2020-03-03 21:31:59.347 info (9962) trigger cleaning all nullVG
-
Hab seit dem update auf die neusste Version auch so 1-2 Probleme.
Bei mir startet der Sauger über ein js. das hat heut nicht mehr funktioniert.
9Uhr sollte er loslegen:mihome-vacuum.0 2020-03-04 09:00:00.029 info (13716) trigger cleaning all nullDas js löst den mihome-vacuum.0.control.start button aus.
Jetzt hab ich den Button per hand ausgelöst und da ging es dann.
Zum anderen bekomme ich diese Meldungen:mihome-vacuum.0 2020-03-04 09:37:13.736 error (13716) Error: IndexSizeError: The source width is 0. mihome-vacuum.0 2020-03-04 09:35:53.774 error (13716) Error: IndexSizeError: The source width is 0. mihome-vacuum.0 2020-03-04 09:34:27.812 error (13716) Error: IndexSizeError: The source width is 0. mihome-vacuum.0 2020-03-04 09:34:24.708 error (13716) Error: IndexSizeError: The source width is 0. mihome-vacuum.0 2020-03-04 09:34:20.458 error (13716) Error: IndexSizeError: The source width is 0. mihome-vacuum.0 2020-03-04 09:34:17.147 error (13716) Error: IndexSizeError: The source width is 0. mihome-vacuum.0 2020-03-04 09:34:13.814 error (13716) Error: IndexSizeError: The source width is 0. mihome-vacuum.0 2020-03-04 09:34:10.498 error (13716) Error: IndexSizeError: The source width is 0. mihome-vacuum.0 2020-03-04 09:34:07.335 error (13716) Error: IndexSizeError: The source width is 0.Es handelt sich um einen Gen1 mit Xiaomi FW und Cloudanbindung im Adapter.
-
@root_ bitte Mal loglevel auf debug setzen.
Wie triggerst du denn per ja? -
@dehein2 der Roboter spricht nicht mit dem Adapter. IP und token richtig?
-
@dirkhe
Genau, per true. Ging bis jetzt 1a.
Ob es notwendig ist bei einem Button weiss ich nicht aber ich setze ihn nach 1000ms wieder auf false. -
@dirkhe @Meistertr
Mein 1S reagiert mit 2.0.7 und 2.0.8 auf "Home" nicht.
Zwischen "Pause" und "Find Me" habe ich immer wieder den "Home" Button im Admin betätigt. Der Sauger stand pausiert im Raum rum, also nicht im Dock. In der MiHome App hat der "Dock" Button dann sofort funktioniert.
Hier das Debug Log dazu:
Hier die History für den Button "Home":
true true mihome-vacuum.0 2020-03-04 19:13:53.665 true false admin.0 2020-03-04 19:13:53.658 true true mihome-vacuum.0 2020-03-04 19:13:53.213 true false admin.0 2020-03-04 19:13:53.204 true true mihome-vacuum.0 2020-03-04 19:13:52.194 true false admin.0 2020-03-04 19:13:52.186 true true mihome-vacuum.0 2020-03-04 19:13:51.440 true false admin.0 2020-03-04 19:13:51.434 true true mihome-vacuum.0 2020-03-04 19:13:47.726 true false admin.0 2020-03-04 19:13:47.719 true true mihome-vacuum.0 2020-03-04 19:13:38.491 true false admin.0 2020-03-04 19:13:38.484 -
@Diginix Alles klar, Fehler gefunden. Ich löse bei home nur aus, wnn er gerade aktiv am Reinigen ist. Flasche Annahme, nehme ich gleich raus und melde mich
-
@root_ Also ich habe jetzt mal geschaut. Einen Button per true zu triggern funktioniert. ich habe dieselbe funktion hinter start und clean_home gepackt und damit akzeptierte start auch ein false, mit dem Ergebniss, dass sofort wieder angehalten wurde. Ist gefixt und wird gleich hochgeladen. Für den IndexSizeError brauche ich ein debug log
-
So für meine Version gibt es jetzt die 2.0.8-RC2
-
@dirkhe machs doch direkt alles in der hauptversion
