Community Forum

Your browser does not seem to support JavaScript. As a result, your viewing experience will be diminished, and you have been placed in read-only mode.

Please download a browser that supports JavaScript, or enable it if it's disabled (i.e. NoScript).

NEWS

UPDATE 31.10.: Amazon Alexa - ioBroker Skill läuft aus ?
A
apollon77

48

3

8.2k
Monatsrückblick – September 2025
B
Bluefox

13

1

1.9k
Neues Video "KI im Smart Home" - ioBroker plus n8n
B
Bluefox

15

1

2.2k

Test Adapter z-wave v1.6.x

Tester

101 Beiträge 10 Kommentatoren 11.1k Aufrufe 9 Watching

S smudu

@Stormbringer
Das einfache zu erst: Ich komme von fhem

@cburghardt
Das mit dem Githib Issues kann ich machen.
Das mit dem Speichern der XML unter /usr/local... habe ich mir nicht ausgesucht und wäre mir ohne Fehlersuche auch nicht aufgefallen.

Vielleicht habe ich mich mißverständlich ausgedrückt. Das Scannen ist natürlich normal. Nur das ioBroker(openzave) bis zum nächsten WAKEUP einer Node keine Status Änderungen meldet, erwarte ich nur unter folgenden Bedingungen:

Neuinstallation Adapter/Instanz
Major Update wie von 1.4.x nach 1.6.x

Ich habe heute nochmals versucht das, mehr oder weniger erfolgreich, zu reproduzieren

Neustart der Z-Wave Instanz > Ok
Kompletter Neustart Raspi > Ok
Info Aktualisieren bei Node 24 (Fibaro Doppelschalter) > Ok, die Instanz bleibt dabei grün/wird nicht neu gestartet!
Laut Log werden auch nur die Datenpunkte für diese Node aktualisiert.
Info Aktualisieren bei Node 15 (Greenwave 6-fach Steckdose) > Fehler
Die Zwave Instanz startet drei mal neu und macht dabei ein Update aller Nodes. Warum aber neben Node 15 nur nochmals für Node 24 alle Datenpunkte aktualisiert werden erschließt sich mir nicht.
Bei einer 6-fach Steckdose mit Messung kommt einiges an Datenpunkten zusammen, vielleicht ein Timeout Problem?

Was mir wichtig ist, dass die Fensterkontakte jetzt trotz der Neustarts immer noch ihren Status korrekt melden. Damit kann ich leben.

Für das OZW log muss ich mir noch was einfallen lassen. Es gibt kein logrotate und es wird bei jedem Neustart der Instanz neu erstellt
Falls das ioBroker Log irgendwie hilft (Info Aktualisieren bei Node 15):

2019-12-04 09:41:15.589 - info: zwave.0 List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyAMA0"}]
2019-12-04 09:42:11.097 - info: zwave.0 Execute refreshNodeInfo for 15
2019-12-04 09:42:11.405 - info: zwave.0 node removed: 15
2019-12-04 09:42:11.582 - error: Caught by controller[0]: terminate called after throwing an instance of 'OpenZWave::OZWException'
2019-12-04 09:42:11.583 - error: Caught by controller[0]: what(): Manager.cpp:1514 - InvalidValueIDError (101) Msg: Invalid ValueID passed to GetValueLabel
2019-12-04 09:42:11.583 - warn: host.mdomus.*** instance system.adapter.zwave.0 terminated due to SIGABRT
2019-12-04 09:42:11.583 - error: host.mdomus.*** instance system.adapter.zwave.0 terminated with code null ()
2019-12-04 09:42:11.583 - info: host.mdomus.*** Restart adapter system.adapter.zwave.0 because enabled
2019-12-04 09:42:41.608 - info: host.mdomus.*** instance system.adapter.zwave.0 started with pid 23326
2019-12-04 09:42:42.289 - info: zwave.0 starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.zwave, node: v10.17.0
2019-12-04 09:42:44.380 - info: zwave.0 scanning homeid=0xe58b19ca...
2019-12-04 09:42:44.381 - info: zwave.0 driver ready: homeid = e58b19ca
2019-12-04 09:42:44.385 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:42:44.397 - info: zwave.0 Update zwave.0.NODE2
2019-12-04 09:42:44.429 - info: zwave.0 Update zwave.0.NODE3
2019-12-04 09:42:44.454 - info: zwave.0 Update zwave.0.NODE8
2019-12-04 09:42:44.469 - info: zwave.0 Update zwave.0.NODE9
2019-12-04 09:42:44.482 - info: zwave.0 Update zwave.0.NODE10
2019-12-04 09:42:44.495 - info: zwave.0 Update zwave.0.NODE16
2019-12-04 09:42:44.787 - info: zwave.0 Update zwave.0.NODE17
2019-12-04 09:42:44.799 - info: zwave.0 Update zwave.0.NODE18
2019-12-04 09:42:44.814 - info: zwave.0 Update zwave.0.NODE19
2019-12-04 09:42:44.837 - info: zwave.0 Update zwave.0.NODE20
2019-12-04 09:42:44.892 - info: zwave.0 Update zwave.0.NODE21
2019-12-04 09:42:44.913 - info: zwave.0 Update zwave.0.NODE22
2019-12-04 09:42:44.927 - info: zwave.0 Update zwave.0.NODE23
2019-12-04 09:42:44.944 - info: zwave.0 Channel created: zwave.0.NODE24.SWITCH_ALL = Disabled, index = 0, comClass = 39, instance = 1
2019-12-04 09:42:44.945 - info: zwave.0 State created: zwave.0.NODE24.SWITCH_ALL.Switch_All = undefined, index = 0, comClass = 39, instance = 1
2019-12-04 09:42:44.949 - info: zwave.0 State created: zwave.0.NODE24.CENTRAL_SCENE.Scene_Reset_Timeout = undefined, index = 257, comClass = 91, instance = 1
2019-12-04 09:42:44.953 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = State saved at power failure, all outputs are set to previous state upon power restore, index = 9, comClass = 112, instance = 1
2019-12-04 09:42:44.954 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Saving_state_before_power_failure = undefined, index = 9, comClass = 112, instance = 1
2019-12-04 09:42:44.954 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Standard operation, index = 10, comClass = 112, instance = 1
2019-12-04 09:42:44.955 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_operating_mode = undefined, index = 10, comClass = 112, instance = 1
2019-12-04 09:42:44.955 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Cancel mode and set target state, index = 11, comClass = 112, instance = 1
2019-12-04 09:42:44.956 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_reaction_to_switch_for_delay/auto_ON/OFF_modes = undefined, index = 11, comClass = 112, instance = 1
2019-12-04 09:42:44.956 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 50, index = 12, comClass = 112, instance = 1
2019-12-04 09:42:44.957 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_time_parameter_for_delay/auto_ON/OFF_modes = undefined, index = 12, comClass = 112, instance = 1
2019-12-04 09:42:44.957 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 5, index = 13, comClass = 112, instance = 1
2019-12-04 09:42:44.957 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_pulse_time_for_flashing_mode = undefined, index = 13, comClass = 112, instance = 1
2019-12-04 09:42:44.958 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Standard operation, index = 15, comClass = 112, instance = 1
2019-12-04 09:42:44.958 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_operating_mode = undefined, index = 15, comClass = 112, instance = 1
2019-12-04 09:42:44.959 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Cancel mode and set target state, index = 16, comClass = 112, instance = 1
2019-12-04 09:42:44.959 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_reaction_to_switch_for_delay/auto_ON/OFF_modes = undefined, index = 16, comClass = 112, instance = 1
2019-12-04 09:42:44.959 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 50, index = 17, comClass = 112, instance = 1
2019-12-04 09:42:44.960 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_time_parameter_for_delay/auto_ON/OFF_modes = undefined, index = 17, comClass = 112, instance = 1
2019-12-04 09:42:44.960 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 5, index = 18, comClass = 112, instance = 1
2019-12-04 09:42:44.960 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_pulse_time_for_flashing_mode = undefined, index = 18, comClass = 112, instance = 1
2019-12-04 09:42:44.961 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Toggle switch (device changes status when switch changes status), index = 20, comClass = 112, instance = 1
2019-12-04 09:42:44.961 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Switch_type = undefined, index = 20, comClass = 112, instance = 1
2019-12-04 09:42:44.962 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Disabled, index = 21, comClass = 112, instance = 1
2019-12-04 09:42:44.962 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Flashing_mode_report = undefined, index = 21, comClass = 112, instance = 1
2019-12-04 09:42:44.963 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 15, index = 27, comClass = 112, instance = 1
2019-12-04 09:42:44.963 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Associations_in_Z-Wave_network_security_mode = undefined, index = 27, comClass = 112, instance = 1
2019-12-04 09:42:44.964 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 28, comClass = 112, instance = 1
2019-12-04 09:42:44.964 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_switch_-_scenes_sent = undefined, index = 28, comClass = 112, instance = 1
2019-12-04 09:42:44.965 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 29, comClass = 112, instance = 1
2019-12-04 09:42:44.965 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_switch_-_scenes_sent = undefined, index = 29, comClass = 112, instance = 1
2019-12-04 09:42:44.966 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 30, comClass = 112, instance = 1
2019-12-04 09:42:44.966 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_associations_sent_to_2nd_and_3rd_association_groups = undefined, index = 30, comClass = 112, instance = 1
2019-12-04 09:42:44.966 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 255, index = 31, comClass = 112, instance = 1
2019-12-04 09:42:44.967 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_Switch_ON_value_sent_to_2nd_and_3rd_association_groups = undefined, index = 31, comClass = 112, instance = 1
2019-12-04 09:42:44.967 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 32, comClass = 112, instance = 1
2019-12-04 09:42:44.967 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_Switch_OFF_value_sent_to_2nd_and_3rd_association_groups = undefined, index = 32, comClass = 112, instance = 1
2019-12-04 09:42:44.968 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 99, index = 33, comClass = 112, instance = 1
2019-12-04 09:42:44.968 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_Switch_Double_Click_value_sent_to_2nd_and_3rd_association_groups = undefined, index = 33, comClass = 112, instance = 1
2019-12-04 09:42:44.969 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 35, comClass = 112, instance = 1
2019-12-04 09:42:44.969 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_associations_sent_to_4th_and_5th_association_groups = undefined, index = 35, comClass = 112, instance = 1
2019-12-04 09:42:44.970 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 255, index = 36, comClass = 112, instance = 1
2019-12-04 09:42:44.970 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_Switch_ON_value_sent_to_4th_and_5th_association_groups = undefined, index = 36, comClass = 112, instance = 1
2019-12-04 09:42:44.971 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 37, comClass = 112, instance = 1
2019-12-04 09:42:44.972 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_Switch_OFF_value_sent_to_4th_and_5th_association_groups = undefined, index = 37, comClass = 112, instance = 1
2019-12-04 09:42:44.973 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 99, index = 38, comClass = 112, instance = 1
2019-12-04 09:42:44.973 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_Switch_Double_Click_value_sent_to_4th_and_5th_association_groups = undefined, index = 38, comClass = 112, instance = 1
2019-12-04 09:42:44.974 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Flash, index = 40, comClass = 112, instance = 1
2019-12-04 09:42:44.974 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Reaction_to_General_Alarm = undefined, index = 40, comClass = 112, instance = 1
2019-12-04 09:42:44.975 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Turn OFF, index = 41, comClass = 112, instance = 1
2019-12-04 09:42:44.976 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Reaction_to_Flood_Alarm = undefined, index = 41, comClass = 112, instance = 1
2019-12-04 09:42:44.977 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Flash, index = 42, comClass = 112, instance = 1
2019-12-04 09:42:44.977 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Reaction_to_CO/CO2/Smoke_Alarm = undefined, index = 42, comClass = 112, instance = 1
2019-12-04 09:42:44.978 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Turn On, index = 43, comClass = 112, instance = 1
2019-12-04 09:42:44.979 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Reaction_to_Heat_Alarm = undefined, index = 43, comClass = 112, instance = 1
2019-12-04 09:42:44.980 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 600, index = 44, comClass = 112, instance = 1
2019-12-04 09:42:44.981 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Flashing_alarm_duration = undefined, index = 44, comClass = 112, instance = 1
2019-12-04 09:42:44.982 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 20, index = 50, comClass = 112, instance = 1
2019-12-04 09:42:44.982 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_power_reports = undefined, index = 50, comClass = 112, instance = 1
2019-12-04 09:42:44.983 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 10, index = 51, comClass = 112, instance = 1
2019-12-04 09:42:44.983 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_minimal_time_between_power_reports = undefined, index = 51, comClass = 112, instance = 1
2019-12-04 09:42:44.984 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 100, index = 53, comClass = 112, instance = 1
2019-12-04 09:42:44.985 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_energy_reports = undefined, index = 53, comClass = 112, instance = 1
2019-12-04 09:42:44.985 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 20, index = 54, comClass = 112, instance = 1
2019-12-04 09:42:44.986 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_Channel_-_power_reports = undefined, index = 54, comClass = 112, instance = 1
2019-12-04 09:42:44.987 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 10, index = 55, comClass = 112, instance = 1
2019-12-04 09:42:44.987 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_minimal_time_between_power_reports = undefined, index = 55, comClass = 112, instance = 1
2019-12-04 09:42:44.988 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 100, index = 57, comClass = 112, instance = 1
2019-12-04 09:42:44.988 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_energy_reports = undefined, index = 57, comClass = 112, instance = 1
2019-12-04 09:42:44.989 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 3600, index = 58, comClass = 112, instance = 1
2019-12-04 09:42:44.989 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Periodic_power_reports = undefined, index = 58, comClass = 112, instance = 1
2019-12-04 09:42:44.990 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 3600, index = 59, comClass = 112, instance = 1
2019-12-04 09:42:44.991 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Periodic_energy_reports = undefined, index = 59, comClass = 112, instance = 1
2019-12-04 09:42:44.991 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = function inactive, index = 60, comClass = 112, instance = 1
2019-12-04 09:42:44.992 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Measuring_energy_consumed_by_the_device_itself = undefined, index = 60, comClass = 112, instance = 1
2019-12-04 09:42:44.994 - info: zwave.0 State created: zwave.0.NODE24.MANUFACTURER_SPECIFIC.Loaded_Config_Revision = undefined, index = 0, comClass = 114, instance = 1
2019-12-04 09:42:44.994 - info: zwave.0 State created: zwave.0.NODE24.MANUFACTURER_SPECIFIC.Config_File_Revision = undefined, index = 1, comClass = 114, instance = 1
2019-12-04 09:42:44.995 - info: zwave.0 State created: zwave.0.NODE24.MANUFACTURER_SPECIFIC.Latest_Available_Config_File_Revision = undefined, index = 2, comClass = 114, instance = 1
2019-12-04 09:42:44.996 - info: zwave.0 State created: zwave.0.NODE24.MANUFACTURER_SPECIFIC.Device_ID = undefined, index = 3, comClass = 114, instance = 1
2019-12-04 09:42:45.001 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Set_Powerlevel = undefined, index = 2, comClass = 115, instance = 1
2019-12-04 09:42:45.005 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Test_Node = undefined, index = 3, comClass = 115, instance = 1
2019-12-04 09:42:45.006 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Test_Powerlevel = undefined, index = 4, comClass = 115, instance = 1
2019-12-04 09:42:45.007 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Frame_Count = undefined, index = 5, comClass = 115, instance = 1
2019-12-04 09:42:45.008 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Test = undefined, index = 6, comClass = 115, instance = 1
2019-12-04 09:42:45.009 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Report = undefined, index = 7, comClass = 115, instance = 1
2019-12-04 09:42:45.010 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Test_Status = undefined, index = 8, comClass = 115, instance = 1
2019-12-04 09:42:45.017 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Acked_Frames = undefined, index = 9, comClass = 115, instance = 1
2019-12-04 09:42:45.019 - info: zwave.0 Channel created: zwave.0.NODE24.SECURITY = false, index = 0, comClass = 152, instance = 1
2019-12-04 09:42:45.019 - info: zwave.0 State created: zwave.0.NODE24.SECURITY.Secured = undefined, index = 0, comClass = 152, instance = 1
2019-12-04 09:42:45.020 - info: zwave.0 Update zwave.0.NODE25
2019-12-04 09:42:45.046 - info: zwave.0 Update zwave.0.NODE26
2019-12-04 09:42:45.067 - info: zwave.0 Update zwave.0.NODE27
2019-12-04 09:42:45.075 - info: zwave.0 Update zwave.0.NODE28
2019-12-04 09:42:45.088 - info: zwave.0 Update zwave.0.NODE29
2019-12-04 09:42:45.097 - info: zwave.0 Update zwave.0.NODE30
2019-12-04 09:42:45.116 - info: zwave.0 Update zwave.0.NODE31
2019-12-04 09:42:48.274 - info: zwave.0 node ready nodeID: 1, nodeInfo: {"manufacturer":"Z-Wave.Me","manufacturerid":"0x0115","product":"ZME_UZB1 USB Stick","producttype":"0x0400","productid":"0x0001","type":"Static PC Controller","name":"","loc":""}
2019-12-04 09:42:48.275 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:42:48.377 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Switch_1 = undefined, index = 0, comClass = 37, instance = 1
2019-12-04 09:42:48.379 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_ALL.Switch_All = undefined, index = 0, comClass = 39, instance = 1
2019-12-04 09:43:01.638 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Loaded_Config_Revision = undefined, index = 0, comClass = 114, instance = 1
2019-12-04 09:43:01.643 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Config_File_Revision = undefined, index = 1, comClass = 114, instance = 1
2019-12-04 09:43:01.644 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Latest_Available_Config_File_Revision = undefined, index = 2, comClass = 114, instance = 1
2019-12-04 09:43:01.649 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Device_ID = undefined, index = 3, comClass = 114, instance = 1
2019-12-04 09:43:01.650 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Serial_Number = undefined, index = 4, comClass = 114, instance = 1
2019-12-04 09:43:01.788 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.Power_delta = undefined, index = 0, comClass = 112, instance = 1
2019-12-04 09:43:01.790 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.No_communication_light = undefined, index = 1, comClass = 112, instance = 1
2019-12-04 09:43:01.791 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.Room_color = undefined, index = 2, comClass = 112, instance = 1
2019-12-04 09:43:01.794 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.Power_on_relay = undefined, index = 3, comClass = 112, instance = 1
2019-12-04 09:43:01.794 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.LED_on_network_error = undefined, index = 4, comClass = 112, instance = 1
2019-12-04 09:43:13.472 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Library_Version = undefined, index = 0, comClass = 134, instance = 1
2019-12-04 09:43:13.476 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Protocol_Version = undefined, index = 1, comClass = 134, instance = 1
2019-12-04 09:43:13.527 - error: Caught by controller[0]: terminate called after throwing an instance of 'OpenZWave::OZWException'
2019-12-04 09:43:13.527 - error: Caught by controller[0]: what(): Manager.cpp:1514 - InvalidValueIDError (101) Msg: Invalid ValueID passed to GetValueLabel
2019-12-04 09:43:13.528 - warn: host.mdomus.*** instance system.adapter.zwave.0 terminated due to SIGABRT
2019-12-04 09:43:13.528 - error: host.mdomus.*** instance system.adapter.zwave.0 terminated with code null ()
2019-12-04 09:43:13.528 - info: host.mdomus.*** Restart adapter system.adapter.zwave.0 because enabled
2019-12-04 09:43:43.555 - info: host.mdomus.*** instance system.adapter.zwave.0 started with pid 24638
2019-12-04 09:43:44.235 - info: zwave.0 starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.zwave, node: v10.17.0
2019-12-04 09:43:46.307 - info: zwave.0 scanning homeid=0xe58b19ca...
2019-12-04 09:43:46.310 - info: zwave.0 driver ready: homeid = e58b19ca
2019-12-04 09:43:46.313 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:43:46.324 - info: zwave.0 Update zwave.0.NODE2
2019-12-04 09:43:46.361 - info: zwave.0 Update zwave.0.NODE3
2019-12-04 09:43:46.387 - info: zwave.0 Update zwave.0.NODE8
2019-12-04 09:43:46.411 - info: zwave.0 Update zwave.0.NODE9
2019-12-04 09:43:46.424 - info: zwave.0 Update zwave.0.NODE10
2019-12-04 09:43:46.443 - info: zwave.0 Update zwave.0.NODE16
2019-12-04 09:43:46.648 - info: zwave.0 Update zwave.0.NODE17
2019-12-04 09:43:46.669 - info: zwave.0 Update zwave.0.NODE18
2019-12-04 09:43:46.686 - info: zwave.0 Update zwave.0.NODE19
2019-12-04 09:43:46.699 - info: zwave.0 Update zwave.0.NODE20
2019-12-04 09:43:46.725 - info: zwave.0 Update zwave.0.NODE21
2019-12-04 09:43:46.738 - info: zwave.0 Update zwave.0.NODE22
2019-12-04 09:43:46.748 - info: zwave.0 Update zwave.0.NODE23
2019-12-04 09:43:46.783 - info: zwave.0 Update zwave.0.NODE25
2019-12-04 09:43:46.813 - info: zwave.0 Update zwave.0.NODE26
2019-12-04 09:43:46.826 - info: zwave.0 Update zwave.0.NODE27
2019-12-04 09:43:46.834 - info: zwave.0 Update zwave.0.NODE28
2019-12-04 09:43:46.847 - info: zwave.0 Update zwave.0.NODE29
2019-12-04 09:43:46.855 - info: zwave.0 Update zwave.0.NODE30
2019-12-04 09:43:46.868 - info: zwave.0 Update zwave.0.NODE31
2019-12-04 09:43:50.089 - info: zwave.0 node ready nodeID: 1, nodeInfo: {"manufacturer":"Z-Wave.Me","manufacturerid":"0x0115","product":"ZME_UZB1 USB Stick","producttype":"0x0400","productid":"0x0001","type":"Static PC Controller","name":"","loc":""}
2019-12-04 09:43:50.090 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:44:15.723 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Protocol_Version = undefined, index = 1, comClass = 134, instance = 1
2019-12-04 09:44:15.773 - error: Caught by controller[0]: terminate called after throwing an instance of 'OpenZWave::OZWException'
2019-12-04 09:44:15.774 - error: Caught by controller[0]: what(): Manager.cpp:1733 - InvalidValueIDError (101) Msg: Invalid ValueID passed to IsValueReadOnly
2019-12-04 09:44:15.774 - warn: host.mdomus.*** instance system.adapter.zwave.0 terminated due to SIGABRT
2019-12-04 09:44:15.774 - error: host.mdomus.*** instance system.adapter.zwave.0 terminated with code null ()
2019-12-04 09:44:15.774 - info: host.mdomus.*** Restart adapter system.adapter.zwave.0 because enabled
2019-12-04 09:44:45.798 - info: host.mdomus.*** instance system.adapter.zwave.0 started with pid 25817
2019-12-04 09:44:46.545 - info: zwave.0 starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.zwave, node: v10.17.0
2019-12-04 09:44:48.802 - info: zwave.0 scanning homeid=0xe58b19ca...
2019-12-04 09:44:48.803 - info: zwave.0 driver ready: homeid = e58b19ca
2019-12-04 09:44:48.807 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:44:48.819 - info: zwave.0 Update zwave.0.NODE2
2019-12-04 09:44:48.861 - info: zwave.0 Update zwave.0.NODE3
2019-12-04 09:44:48.888 - info: zwave.0 Update zwave.0.NODE8
2019-12-04 09:44:48.903 - info: zwave.0 Update zwave.0.NODE9
2019-12-04 09:44:48.917 - info: zwave.0 Update zwave.0.NODE10
2019-12-04 09:44:48.933 - info: zwave.0 Update zwave.0.NODE16
2019-12-04 09:44:48.941 - info: zwave.0 Update zwave.0.NODE17
2019-12-04 09:44:48.952 - info: zwave.0 Update zwave.0.NODE18
2019-12-04 09:44:49.222 - info: zwave.0 Update zwave.0.NODE19
2019-12-04 09:44:49.235 - info: zwave.0 Update zwave.0.NODE20
2019-12-04 09:44:49.249 - info: zwave.0 Update zwave.0.NODE21
2019-12-04 09:44:49.266 - info: zwave.0 Update zwave.0.NODE22
2019-12-04 09:44:49.303 - info: zwave.0 Update zwave.0.NODE23
2019-12-04 09:44:49.377 - info: zwave.0 Update zwave.0.NODE25
2019-12-04 09:44:49.407 - info: zwave.0 Update zwave.0.NODE26
2019-12-04 09:44:49.418 - info: zwave.0 Update zwave.0.NODE27
2019-12-04 09:44:49.427 - info: zwave.0 Update zwave.0.NODE28
2019-12-04 09:44:49.442 - info: zwave.0 Update zwave.0.NODE29
2019-12-04 09:44:49.451 - info: zwave.0 Update zwave.0.NODE30
2019-12-04 09:44:49.466 - info: zwave.0 Update zwave.0.NODE31
2019-12-04 09:44:52.483 - info: zwave.0 node ready nodeID: 1, nodeInfo: {"manufacturer":"Z-Wave.Me","manufacturerid":"0x0115","product":"ZME_UZB1 USB Stick","producttype":"0x0400","productid":"0x0001","type":"Static PC Controller","name":"","loc":""}
2019-12-04 09:44:52.484 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:45:27.431 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Application_Version = undefined, index = 2, comClass = 134, instance = 1
2019-12-04 09:46:14.939 - info: zwave.0 node ready nodeID: 3, nodeInfo: {"manufacturer":"Devolo home Control","manufacturerid":"0x0175","product":"Metering Plug MT02646","producttype":"0x0001","productid":"0x0011","type":"On/Off Power Switch","name":"","loc":""}
2019-12-04 09:46:14.941 - info: zwave.0 Update zwave.0.NODE3
2019-12-04 09:46:15.044 - info: zwave.0 node ready nodeID: 16, nodeInfo: {"manufacturer":"Popp & Co","manufacturerid":"0x0154","product":"Smoke Detector and Siren","producttype":"0x0100","productid":"0x0201","type":"Smoke Alarm Sensor","name":"","loc":""}
2019-12-04 09:46:15.045 - info: zwave.0 Update zwave.0.NODE16
2019-12-04 09:46:15.138 - info: zwave.0 node ready nodeID: 24, nodeInfo: {"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGS223 Double Relay","producttype":"0x0203","productid":"0x1000","type":"On/Off Power Switch","name":"","loc":""}
2019-12-04 09:46:15.232 - info: zwave.0 node ready nodeID: 25, nodeInfo: {"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGS223 Double Relay","producttype":"0x0203","productid":"0x1000","type":"On/Off Power Switch","name":"","loc":""}
2019-12-04 09:46:15.233 - info: zwave.0 Update zwave.0.NODE25
2019-12-04 09:46:15.317 - info: zwave.0 node ready nodeID: 27, nodeInfo: {"manufacturer":"Popp & Co","manufacturerid":"0x0154","product":"Smoke Detector and Siren","producttype":"0x0100","productid":"0x0201","type":"Smoke Alarm Sensor","name":"","loc":""}
2019-12-04 09:46:15.317 - info: zwave.0 Update zwave.0.NODE27
2019-12-04 09:46:15.413 - info: zwave.0 node ready nodeID: 31, nodeInfo: {"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGWR111 Walli Roller Shutter","producttype":"0x1d01","productid":"0x1000","type":"Window Covering Endpoint Aware","name":"","loc":""}
2019-12-04 09:46:15.413 - info: zwave.0 Update zwave.0.NODE31
2019-12-04 09:46:15.496 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_2:_Switch_2 = undefined, index = 0, comClass = 37, instance = 2
2019-12-04 09:46:15.500 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_2:_Protection = undefined, index = 0, comClass = 117, instance = 2
2019-12-04 09:46:15.502 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_3:_Switch_3 = undefined, index = 0, comClass = 37, instance = 3
2019-12-04 09:46:15.504 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_3:_Protection = undefined, index = 0, comClass = 117, instance = 3
2019-12-04 09:46:15.505 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_4:_Switch_4 = undefined, index = 0, comClass = 37, instance = 4
2019-12-04 09:46:15.506 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_4:_Protection = undefined, index = 0, comClass = 117, instance = 4
2019-12-04 09:46:15.506 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_5:_Switch_5 = undefined, index = 0, comClass = 37, instance = 5
2019-12-04 09:46:15.507 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_5:_Protection = undefined, index = 0, comClass = 117, instance = 5
2019-12-04 09:46:15.508 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_6:_Switch_6 = undefined, index = 0, comClass = 37, instance = 6
2019-12-04 09:46:15.508 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_6:_Protection = undefined, index = 0, comClass = 117, instance = 6
2019-12-04 09:46:15.559 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_1:_Electric_-_kWh_1 = undefined, index = 0, comClass = 50, instance = 1
2019-12-04 09:46:15.562 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_1:_Electric_-_W_1 = undefined, index = 2, comClass = 50, instance = 1
2019-12-04 09:46:15.563 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_1:_Exporting_1 = undefined, index = 256, comClass = 50, instance = 1
2019-12-04 09:46:15.564 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_1:_Reset = undefined, index = 257, comClass = 50, instance = 1
2019-12-04 09:46:15.589 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_2:_Electric_-_kWh_2 = undefined, index = 0, comClass = 50, instance = 2
2019-12-04 09:46:15.591 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_2:_Electric_-_W_2 = undefined, index = 2, comClass = 50, instance = 2
2019-12-04 09:46:15.592 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_2:_Exporting_2 = undefined, index = 256, comClass = 50, instance = 2
2019-12-04 09:46:15.593 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_2:_Reset = undefined, index = 257, comClass = 50, instance = 2
2019-12-04 09:46:15.625 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_3:_Electric_-_kWh_3 = undefined, index = 0, comClass = 50, instance = 3
2019-12-04 09:46:15.629 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_3:_Electric_-_W_3 = undefined, index = 2, comClass = 50, instance = 3
2019-12-04 09:46:15.631 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_3:_Exporting_3 = undefined, index = 256, comClass = 50, instance = 3
2019-12-04 09:46:15.631 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_3:_Reset = undefined, index = 257, comClass = 50, instance = 3
2019-12-04 09:46:15.665 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_4:_Electric_-_kWh_4 = undefined, index = 0, comClass = 50, instance = 4
2019-12-04 09:46:15.668 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_4:_Electric_-_W_4 = undefined, index = 2, comClass = 50, instance = 4
2019-12-04 09:46:15.671 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_4:_Exporting_4 = undefined, index = 256, comClass = 50, instance = 4
2019-12-04 09:46:15.672 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_4:_Reset = undefined, index = 257, comClass = 50, instance = 4
2019-12-04 09:46:15.709 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_5:_Electric_-_kWh_5 = undefined, index = 0, comClass = 50, instance = 5
2019-12-04 09:46:15.711 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_5:_Electric_-_W_5 = undefined, index = 2, comClass = 50, instance = 5
2019-12-04 09:46:15.712 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_5:_Exporting_5 = undefined, index = 256, comClass = 50, instance = 5
2019-12-04 09:46:15.713 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_5:_Reset = undefined, index = 257, comClass = 50, instance = 5
2019-12-04 09:46:15.750 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_6:_Electric_-_kWh_6 = undefined, index = 0, comClass = 50, instance = 6
2019-12-04 09:46:15.752 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_6:_Electric_-_W_6 = undefined, index = 2, comClass = 50, instance = 6
2019-12-04 09:46:15.753 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_6:_Exporting_6 = undefined, index = 256, comClass = 50, instance = 6
2019-12-04 09:46:15.754 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_6:_Reset = undefined, index = 257, comClass = 50, instance = 6
2019-12-04 09:46:16.113 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_1:_Protection = undefined, index = 0, comClass = 117, instance = 1
2019-12-04 09:46:16.356 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_1:_Switch_1 = undefined, index = 0, comClass = 37, instance = 1
2019-12-04 09:46:17.203 - info: zwave.0 node ready nodeID: 15, nodeInfo: {"manufacturer":"GreenWave Reality Inc","manufacturerid":"0x0099","product":"PowerNode 6 port","producttype":"0x0003","productid":"0x0004","type":"Binary Power Switch","name":"","loc":""}
2019-12-04 09:46:17.218 - info: zwave.0 Scan completed

arteck

Developer Most Active

schrieb am

#87

@smudu sagte in Test Adapter z-wave v1.6.x:

2019-12-04 09:44:15.723 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Protocol_Version = undefined, index = 1, comClass = 134, instance = 1
2019-12-04 09:44:15.773 - error: Caught by controller[0]: terminate called after throwing an instance of 'OpenZWave::OZWException'
2019-12-04 09:44:15.774 - error: Caught by controller[0]: what(): Manager.cpp:1733 - InvalidValueIDError (101) Msg: Invalid ValueID passed to IsValueReadOnly
2019-12-04 09:44:15.774 - warn: host.mdomus.*** instance system.adapter.zwave.0 terminated due to SIGABRT

das problem scheint mit dem NODE15 zusamenzuhängen

hmm.. was passiert wenn du das Node15 exludierst und neu einbindest ??

S Offline
S Offline
smudu

schrieb am zuletzt editiert von

#88

@arteck
Wäre eine Option zu testen.
Ist dann allerdings ein "Projekt" für die Feiertage. Wenn sich zwangsläufig die Node ID ändert, zerlegt's mir Scripte, iQontrol und iot/Alexa.
1 Antwort Letzte Antwort

0

S smudu

@Stormbringer
Das einfache zu erst: Ich komme von fhem

@cburghardt
Das mit dem Githib Issues kann ich machen.
Das mit dem Speichern der XML unter /usr/local... habe ich mir nicht ausgesucht und wäre mir ohne Fehlersuche auch nicht aufgefallen.

Neuinstallation Adapter/Instanz
Major Update wie von 1.4.x nach 1.6.x

Ich habe heute nochmals versucht das, mehr oder weniger erfolgreich, zu reproduzieren

Neustart der Z-Wave Instanz > Ok
Kompletter Neustart Raspi > Ok
Info Aktualisieren bei Node 24 (Fibaro Doppelschalter) > Ok, die Instanz bleibt dabei grün/wird nicht neu gestartet!
Laut Log werden auch nur die Datenpunkte für diese Node aktualisiert.
Info Aktualisieren bei Node 15 (Greenwave 6-fach Steckdose) > Fehler
Die Zwave Instanz startet drei mal neu und macht dabei ein Update aller Nodes. Warum aber neben Node 15 nur nochmals für Node 24 alle Datenpunkte aktualisiert werden erschließt sich mir nicht.
Bei einer 6-fach Steckdose mit Messung kommt einiges an Datenpunkten zusammen, vielleicht ein Timeout Problem?

Was mir wichtig ist, dass die Fensterkontakte jetzt trotz der Neustarts immer noch ihren Status korrekt melden. Damit kann ich leben.

2019-12-04 09:41:15.589 - info: zwave.0 List of ports: [{"comName":"/dev/ttyACM0"},{"comName":"/dev/ttyAMA0"}]
2019-12-04 09:42:11.097 - info: zwave.0 Execute refreshNodeInfo for 15
2019-12-04 09:42:11.405 - info: zwave.0 node removed: 15
2019-12-04 09:42:11.582 - error: Caught by controller[0]: terminate called after throwing an instance of 'OpenZWave::OZWException'
2019-12-04 09:42:11.583 - error: Caught by controller[0]: what(): Manager.cpp:1514 - InvalidValueIDError (101) Msg: Invalid ValueID passed to GetValueLabel
2019-12-04 09:42:11.583 - warn: host.mdomus.*** instance system.adapter.zwave.0 terminated due to SIGABRT
2019-12-04 09:42:11.583 - error: host.mdomus.*** instance system.adapter.zwave.0 terminated with code null ()
2019-12-04 09:42:11.583 - info: host.mdomus.*** Restart adapter system.adapter.zwave.0 because enabled
2019-12-04 09:42:41.608 - info: host.mdomus.*** instance system.adapter.zwave.0 started with pid 23326
2019-12-04 09:42:42.289 - info: zwave.0 starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.zwave, node: v10.17.0
2019-12-04 09:42:44.380 - info: zwave.0 scanning homeid=0xe58b19ca...
2019-12-04 09:42:44.381 - info: zwave.0 driver ready: homeid = e58b19ca
2019-12-04 09:42:44.385 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:42:44.397 - info: zwave.0 Update zwave.0.NODE2
2019-12-04 09:42:44.429 - info: zwave.0 Update zwave.0.NODE3
2019-12-04 09:42:44.454 - info: zwave.0 Update zwave.0.NODE8
2019-12-04 09:42:44.469 - info: zwave.0 Update zwave.0.NODE9
2019-12-04 09:42:44.482 - info: zwave.0 Update zwave.0.NODE10
2019-12-04 09:42:44.495 - info: zwave.0 Update zwave.0.NODE16
2019-12-04 09:42:44.787 - info: zwave.0 Update zwave.0.NODE17
2019-12-04 09:42:44.799 - info: zwave.0 Update zwave.0.NODE18
2019-12-04 09:42:44.814 - info: zwave.0 Update zwave.0.NODE19
2019-12-04 09:42:44.837 - info: zwave.0 Update zwave.0.NODE20
2019-12-04 09:42:44.892 - info: zwave.0 Update zwave.0.NODE21
2019-12-04 09:42:44.913 - info: zwave.0 Update zwave.0.NODE22
2019-12-04 09:42:44.927 - info: zwave.0 Update zwave.0.NODE23
2019-12-04 09:42:44.944 - info: zwave.0 Channel created: zwave.0.NODE24.SWITCH_ALL = Disabled, index = 0, comClass = 39, instance = 1
2019-12-04 09:42:44.945 - info: zwave.0 State created: zwave.0.NODE24.SWITCH_ALL.Switch_All = undefined, index = 0, comClass = 39, instance = 1
2019-12-04 09:42:44.949 - info: zwave.0 State created: zwave.0.NODE24.CENTRAL_SCENE.Scene_Reset_Timeout = undefined, index = 257, comClass = 91, instance = 1
2019-12-04 09:42:44.953 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = State saved at power failure, all outputs are set to previous state upon power restore, index = 9, comClass = 112, instance = 1
2019-12-04 09:42:44.954 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Saving_state_before_power_failure = undefined, index = 9, comClass = 112, instance = 1
2019-12-04 09:42:44.954 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Standard operation, index = 10, comClass = 112, instance = 1
2019-12-04 09:42:44.955 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_operating_mode = undefined, index = 10, comClass = 112, instance = 1
2019-12-04 09:42:44.955 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Cancel mode and set target state, index = 11, comClass = 112, instance = 1
2019-12-04 09:42:44.956 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_reaction_to_switch_for_delay/auto_ON/OFF_modes = undefined, index = 11, comClass = 112, instance = 1
2019-12-04 09:42:44.956 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 50, index = 12, comClass = 112, instance = 1
2019-12-04 09:42:44.957 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_time_parameter_for_delay/auto_ON/OFF_modes = undefined, index = 12, comClass = 112, instance = 1
2019-12-04 09:42:44.957 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 5, index = 13, comClass = 112, instance = 1
2019-12-04 09:42:44.957 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_pulse_time_for_flashing_mode = undefined, index = 13, comClass = 112, instance = 1
2019-12-04 09:42:44.958 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Standard operation, index = 15, comClass = 112, instance = 1
2019-12-04 09:42:44.958 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_operating_mode = undefined, index = 15, comClass = 112, instance = 1
2019-12-04 09:42:44.959 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Cancel mode and set target state, index = 16, comClass = 112, instance = 1
2019-12-04 09:42:44.959 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_reaction_to_switch_for_delay/auto_ON/OFF_modes = undefined, index = 16, comClass = 112, instance = 1
2019-12-04 09:42:44.959 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 50, index = 17, comClass = 112, instance = 1
2019-12-04 09:42:44.960 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_time_parameter_for_delay/auto_ON/OFF_modes = undefined, index = 17, comClass = 112, instance = 1
2019-12-04 09:42:44.960 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 5, index = 18, comClass = 112, instance = 1
2019-12-04 09:42:44.960 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_pulse_time_for_flashing_mode = undefined, index = 18, comClass = 112, instance = 1
2019-12-04 09:42:44.961 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Toggle switch (device changes status when switch changes status), index = 20, comClass = 112, instance = 1
2019-12-04 09:42:44.961 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Switch_type = undefined, index = 20, comClass = 112, instance = 1
2019-12-04 09:42:44.962 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Disabled, index = 21, comClass = 112, instance = 1
2019-12-04 09:42:44.962 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Flashing_mode_report = undefined, index = 21, comClass = 112, instance = 1
2019-12-04 09:42:44.963 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 15, index = 27, comClass = 112, instance = 1
2019-12-04 09:42:44.963 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Associations_in_Z-Wave_network_security_mode = undefined, index = 27, comClass = 112, instance = 1
2019-12-04 09:42:44.964 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 28, comClass = 112, instance = 1
2019-12-04 09:42:44.964 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_switch_-_scenes_sent = undefined, index = 28, comClass = 112, instance = 1
2019-12-04 09:42:44.965 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 29, comClass = 112, instance = 1
2019-12-04 09:42:44.965 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_switch_-_scenes_sent = undefined, index = 29, comClass = 112, instance = 1
2019-12-04 09:42:44.966 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 30, comClass = 112, instance = 1
2019-12-04 09:42:44.966 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_associations_sent_to_2nd_and_3rd_association_groups = undefined, index = 30, comClass = 112, instance = 1
2019-12-04 09:42:44.966 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 255, index = 31, comClass = 112, instance = 1
2019-12-04 09:42:44.967 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_Switch_ON_value_sent_to_2nd_and_3rd_association_groups = undefined, index = 31, comClass = 112, instance = 1
2019-12-04 09:42:44.967 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 32, comClass = 112, instance = 1
2019-12-04 09:42:44.967 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_Switch_OFF_value_sent_to_2nd_and_3rd_association_groups = undefined, index = 32, comClass = 112, instance = 1
2019-12-04 09:42:44.968 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 99, index = 33, comClass = 112, instance = 1
2019-12-04 09:42:44.968 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S1_Switch_Double_Click_value_sent_to_2nd_and_3rd_association_groups = undefined, index = 33, comClass = 112, instance = 1
2019-12-04 09:42:44.969 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 35, comClass = 112, instance = 1
2019-12-04 09:42:44.969 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_associations_sent_to_4th_and_5th_association_groups = undefined, index = 35, comClass = 112, instance = 1
2019-12-04 09:42:44.970 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 255, index = 36, comClass = 112, instance = 1
2019-12-04 09:42:44.970 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_Switch_ON_value_sent_to_4th_and_5th_association_groups = undefined, index = 36, comClass = 112, instance = 1
2019-12-04 09:42:44.971 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 0, index = 37, comClass = 112, instance = 1
2019-12-04 09:42:44.972 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_Switch_OFF_value_sent_to_4th_and_5th_association_groups = undefined, index = 37, comClass = 112, instance = 1
2019-12-04 09:42:44.973 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 99, index = 38, comClass = 112, instance = 1
2019-12-04 09:42:44.973 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.S2_Switch_Double_Click_value_sent_to_4th_and_5th_association_groups = undefined, index = 38, comClass = 112, instance = 1
2019-12-04 09:42:44.974 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Flash, index = 40, comClass = 112, instance = 1
2019-12-04 09:42:44.974 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Reaction_to_General_Alarm = undefined, index = 40, comClass = 112, instance = 1
2019-12-04 09:42:44.975 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Turn OFF, index = 41, comClass = 112, instance = 1
2019-12-04 09:42:44.976 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Reaction_to_Flood_Alarm = undefined, index = 41, comClass = 112, instance = 1
2019-12-04 09:42:44.977 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Flash, index = 42, comClass = 112, instance = 1
2019-12-04 09:42:44.977 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Reaction_to_CO/CO2/Smoke_Alarm = undefined, index = 42, comClass = 112, instance = 1
2019-12-04 09:42:44.978 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = Turn On, index = 43, comClass = 112, instance = 1
2019-12-04 09:42:44.979 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Reaction_to_Heat_Alarm = undefined, index = 43, comClass = 112, instance = 1
2019-12-04 09:42:44.980 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 600, index = 44, comClass = 112, instance = 1
2019-12-04 09:42:44.981 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Flashing_alarm_duration = undefined, index = 44, comClass = 112, instance = 1
2019-12-04 09:42:44.982 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 20, index = 50, comClass = 112, instance = 1
2019-12-04 09:42:44.982 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_power_reports = undefined, index = 50, comClass = 112, instance = 1
2019-12-04 09:42:44.983 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 10, index = 51, comClass = 112, instance = 1
2019-12-04 09:42:44.983 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_minimal_time_between_power_reports = undefined, index = 51, comClass = 112, instance = 1
2019-12-04 09:42:44.984 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 100, index = 53, comClass = 112, instance = 1
2019-12-04 09:42:44.985 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.First_channel_-_energy_reports = undefined, index = 53, comClass = 112, instance = 1
2019-12-04 09:42:44.985 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 20, index = 54, comClass = 112, instance = 1
2019-12-04 09:42:44.986 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_Channel_-_power_reports = undefined, index = 54, comClass = 112, instance = 1
2019-12-04 09:42:44.987 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 10, index = 55, comClass = 112, instance = 1
2019-12-04 09:42:44.987 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_minimal_time_between_power_reports = undefined, index = 55, comClass = 112, instance = 1
2019-12-04 09:42:44.988 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 100, index = 57, comClass = 112, instance = 1
2019-12-04 09:42:44.988 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Second_channel_-_energy_reports = undefined, index = 57, comClass = 112, instance = 1
2019-12-04 09:42:44.989 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 3600, index = 58, comClass = 112, instance = 1
2019-12-04 09:42:44.989 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Periodic_power_reports = undefined, index = 58, comClass = 112, instance = 1
2019-12-04 09:42:44.990 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = 3600, index = 59, comClass = 112, instance = 1
2019-12-04 09:42:44.991 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Periodic_energy_reports = undefined, index = 59, comClass = 112, instance = 1
2019-12-04 09:42:44.991 - info: zwave.0 Channel created: zwave.0.NODE24.CONFIGURATION = function inactive, index = 60, comClass = 112, instance = 1
2019-12-04 09:42:44.992 - info: zwave.0 State created: zwave.0.NODE24.CONFIGURATION.Measuring_energy_consumed_by_the_device_itself = undefined, index = 60, comClass = 112, instance = 1
2019-12-04 09:42:44.994 - info: zwave.0 State created: zwave.0.NODE24.MANUFACTURER_SPECIFIC.Loaded_Config_Revision = undefined, index = 0, comClass = 114, instance = 1
2019-12-04 09:42:44.994 - info: zwave.0 State created: zwave.0.NODE24.MANUFACTURER_SPECIFIC.Config_File_Revision = undefined, index = 1, comClass = 114, instance = 1
2019-12-04 09:42:44.995 - info: zwave.0 State created: zwave.0.NODE24.MANUFACTURER_SPECIFIC.Latest_Available_Config_File_Revision = undefined, index = 2, comClass = 114, instance = 1
2019-12-04 09:42:44.996 - info: zwave.0 State created: zwave.0.NODE24.MANUFACTURER_SPECIFIC.Device_ID = undefined, index = 3, comClass = 114, instance = 1
2019-12-04 09:42:45.001 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Set_Powerlevel = undefined, index = 2, comClass = 115, instance = 1
2019-12-04 09:42:45.005 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Test_Node = undefined, index = 3, comClass = 115, instance = 1
2019-12-04 09:42:45.006 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Test_Powerlevel = undefined, index = 4, comClass = 115, instance = 1
2019-12-04 09:42:45.007 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Frame_Count = undefined, index = 5, comClass = 115, instance = 1
2019-12-04 09:42:45.008 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Test = undefined, index = 6, comClass = 115, instance = 1
2019-12-04 09:42:45.009 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Report = undefined, index = 7, comClass = 115, instance = 1
2019-12-04 09:42:45.010 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Test_Status = undefined, index = 8, comClass = 115, instance = 1
2019-12-04 09:42:45.017 - info: zwave.0 State created: zwave.0.NODE24.POWERLEVEL.Acked_Frames = undefined, index = 9, comClass = 115, instance = 1
2019-12-04 09:42:45.019 - info: zwave.0 Channel created: zwave.0.NODE24.SECURITY = false, index = 0, comClass = 152, instance = 1
2019-12-04 09:42:45.019 - info: zwave.0 State created: zwave.0.NODE24.SECURITY.Secured = undefined, index = 0, comClass = 152, instance = 1
2019-12-04 09:42:45.020 - info: zwave.0 Update zwave.0.NODE25
2019-12-04 09:42:45.046 - info: zwave.0 Update zwave.0.NODE26
2019-12-04 09:42:45.067 - info: zwave.0 Update zwave.0.NODE27
2019-12-04 09:42:45.075 - info: zwave.0 Update zwave.0.NODE28
2019-12-04 09:42:45.088 - info: zwave.0 Update zwave.0.NODE29
2019-12-04 09:42:45.097 - info: zwave.0 Update zwave.0.NODE30
2019-12-04 09:42:45.116 - info: zwave.0 Update zwave.0.NODE31
2019-12-04 09:42:48.274 - info: zwave.0 node ready nodeID: 1, nodeInfo: {"manufacturer":"Z-Wave.Me","manufacturerid":"0x0115","product":"ZME_UZB1 USB Stick","producttype":"0x0400","productid":"0x0001","type":"Static PC Controller","name":"","loc":""}
2019-12-04 09:42:48.275 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:42:48.377 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Switch_1 = undefined, index = 0, comClass = 37, instance = 1
2019-12-04 09:42:48.379 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_ALL.Switch_All = undefined, index = 0, comClass = 39, instance = 1
2019-12-04 09:43:01.638 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Loaded_Config_Revision = undefined, index = 0, comClass = 114, instance = 1
2019-12-04 09:43:01.643 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Config_File_Revision = undefined, index = 1, comClass = 114, instance = 1
2019-12-04 09:43:01.644 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Latest_Available_Config_File_Revision = undefined, index = 2, comClass = 114, instance = 1
2019-12-04 09:43:01.649 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Device_ID = undefined, index = 3, comClass = 114, instance = 1
2019-12-04 09:43:01.650 - info: zwave.0 State created: zwave.0.NODE15.MANUFACTURER_SPECIFIC.Serial_Number = undefined, index = 4, comClass = 114, instance = 1
2019-12-04 09:43:01.788 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.Power_delta = undefined, index = 0, comClass = 112, instance = 1
2019-12-04 09:43:01.790 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.No_communication_light = undefined, index = 1, comClass = 112, instance = 1
2019-12-04 09:43:01.791 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.Room_color = undefined, index = 2, comClass = 112, instance = 1
2019-12-04 09:43:01.794 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.Power_on_relay = undefined, index = 3, comClass = 112, instance = 1
2019-12-04 09:43:01.794 - info: zwave.0 State created: zwave.0.NODE15.CONFIGURATION.LED_on_network_error = undefined, index = 4, comClass = 112, instance = 1
2019-12-04 09:43:13.472 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Library_Version = undefined, index = 0, comClass = 134, instance = 1
2019-12-04 09:43:13.476 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Protocol_Version = undefined, index = 1, comClass = 134, instance = 1
2019-12-04 09:43:13.527 - error: Caught by controller[0]: terminate called after throwing an instance of 'OpenZWave::OZWException'
2019-12-04 09:43:13.527 - error: Caught by controller[0]: what(): Manager.cpp:1514 - InvalidValueIDError (101) Msg: Invalid ValueID passed to GetValueLabel
2019-12-04 09:43:13.528 - warn: host.mdomus.*** instance system.adapter.zwave.0 terminated due to SIGABRT
2019-12-04 09:43:13.528 - error: host.mdomus.*** instance system.adapter.zwave.0 terminated with code null ()
2019-12-04 09:43:13.528 - info: host.mdomus.*** Restart adapter system.adapter.zwave.0 because enabled
2019-12-04 09:43:43.555 - info: host.mdomus.*** instance system.adapter.zwave.0 started with pid 24638
2019-12-04 09:43:44.235 - info: zwave.0 starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.zwave, node: v10.17.0
2019-12-04 09:43:46.307 - info: zwave.0 scanning homeid=0xe58b19ca...
2019-12-04 09:43:46.310 - info: zwave.0 driver ready: homeid = e58b19ca
2019-12-04 09:43:46.313 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:43:46.324 - info: zwave.0 Update zwave.0.NODE2
2019-12-04 09:43:46.361 - info: zwave.0 Update zwave.0.NODE3
2019-12-04 09:43:46.387 - info: zwave.0 Update zwave.0.NODE8
2019-12-04 09:43:46.411 - info: zwave.0 Update zwave.0.NODE9
2019-12-04 09:43:46.424 - info: zwave.0 Update zwave.0.NODE10
2019-12-04 09:43:46.443 - info: zwave.0 Update zwave.0.NODE16
2019-12-04 09:43:46.648 - info: zwave.0 Update zwave.0.NODE17
2019-12-04 09:43:46.669 - info: zwave.0 Update zwave.0.NODE18
2019-12-04 09:43:46.686 - info: zwave.0 Update zwave.0.NODE19
2019-12-04 09:43:46.699 - info: zwave.0 Update zwave.0.NODE20
2019-12-04 09:43:46.725 - info: zwave.0 Update zwave.0.NODE21
2019-12-04 09:43:46.738 - info: zwave.0 Update zwave.0.NODE22
2019-12-04 09:43:46.748 - info: zwave.0 Update zwave.0.NODE23
2019-12-04 09:43:46.783 - info: zwave.0 Update zwave.0.NODE25
2019-12-04 09:43:46.813 - info: zwave.0 Update zwave.0.NODE26
2019-12-04 09:43:46.826 - info: zwave.0 Update zwave.0.NODE27
2019-12-04 09:43:46.834 - info: zwave.0 Update zwave.0.NODE28
2019-12-04 09:43:46.847 - info: zwave.0 Update zwave.0.NODE29
2019-12-04 09:43:46.855 - info: zwave.0 Update zwave.0.NODE30
2019-12-04 09:43:46.868 - info: zwave.0 Update zwave.0.NODE31
2019-12-04 09:43:50.089 - info: zwave.0 node ready nodeID: 1, nodeInfo: {"manufacturer":"Z-Wave.Me","manufacturerid":"0x0115","product":"ZME_UZB1 USB Stick","producttype":"0x0400","productid":"0x0001","type":"Static PC Controller","name":"","loc":""}
2019-12-04 09:43:50.090 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:44:15.723 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Protocol_Version = undefined, index = 1, comClass = 134, instance = 1
2019-12-04 09:44:15.773 - error: Caught by controller[0]: terminate called after throwing an instance of 'OpenZWave::OZWException'
2019-12-04 09:44:15.774 - error: Caught by controller[0]: what(): Manager.cpp:1733 - InvalidValueIDError (101) Msg: Invalid ValueID passed to IsValueReadOnly
2019-12-04 09:44:15.774 - warn: host.mdomus.*** instance system.adapter.zwave.0 terminated due to SIGABRT
2019-12-04 09:44:15.774 - error: host.mdomus.*** instance system.adapter.zwave.0 terminated with code null ()
2019-12-04 09:44:15.774 - info: host.mdomus.*** Restart adapter system.adapter.zwave.0 because enabled
2019-12-04 09:44:45.798 - info: host.mdomus.*** instance system.adapter.zwave.0 started with pid 25817
2019-12-04 09:44:46.545 - info: zwave.0 starting. Version 1.7.2 in /opt/iobroker/node_modules/iobroker.zwave, node: v10.17.0
2019-12-04 09:44:48.802 - info: zwave.0 scanning homeid=0xe58b19ca...
2019-12-04 09:44:48.803 - info: zwave.0 driver ready: homeid = e58b19ca
2019-12-04 09:44:48.807 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:44:48.819 - info: zwave.0 Update zwave.0.NODE2
2019-12-04 09:44:48.861 - info: zwave.0 Update zwave.0.NODE3
2019-12-04 09:44:48.888 - info: zwave.0 Update zwave.0.NODE8
2019-12-04 09:44:48.903 - info: zwave.0 Update zwave.0.NODE9
2019-12-04 09:44:48.917 - info: zwave.0 Update zwave.0.NODE10
2019-12-04 09:44:48.933 - info: zwave.0 Update zwave.0.NODE16
2019-12-04 09:44:48.941 - info: zwave.0 Update zwave.0.NODE17
2019-12-04 09:44:48.952 - info: zwave.0 Update zwave.0.NODE18
2019-12-04 09:44:49.222 - info: zwave.0 Update zwave.0.NODE19
2019-12-04 09:44:49.235 - info: zwave.0 Update zwave.0.NODE20
2019-12-04 09:44:49.249 - info: zwave.0 Update zwave.0.NODE21
2019-12-04 09:44:49.266 - info: zwave.0 Update zwave.0.NODE22
2019-12-04 09:44:49.303 - info: zwave.0 Update zwave.0.NODE23
2019-12-04 09:44:49.377 - info: zwave.0 Update zwave.0.NODE25
2019-12-04 09:44:49.407 - info: zwave.0 Update zwave.0.NODE26
2019-12-04 09:44:49.418 - info: zwave.0 Update zwave.0.NODE27
2019-12-04 09:44:49.427 - info: zwave.0 Update zwave.0.NODE28
2019-12-04 09:44:49.442 - info: zwave.0 Update zwave.0.NODE29
2019-12-04 09:44:49.451 - info: zwave.0 Update zwave.0.NODE30
2019-12-04 09:44:49.466 - info: zwave.0 Update zwave.0.NODE31
2019-12-04 09:44:52.483 - info: zwave.0 node ready nodeID: 1, nodeInfo: {"manufacturer":"Z-Wave.Me","manufacturerid":"0x0115","product":"ZME_UZB1 USB Stick","producttype":"0x0400","productid":"0x0001","type":"Static PC Controller","name":"","loc":""}
2019-12-04 09:44:52.484 - info: zwave.0 Update zwave.0.NODE1
2019-12-04 09:45:27.431 - info: zwave.0 State created: zwave.0.NODE15.VERSION.Application_Version = undefined, index = 2, comClass = 134, instance = 1
2019-12-04 09:46:14.939 - info: zwave.0 node ready nodeID: 3, nodeInfo: {"manufacturer":"Devolo home Control","manufacturerid":"0x0175","product":"Metering Plug MT02646","producttype":"0x0001","productid":"0x0011","type":"On/Off Power Switch","name":"","loc":""}
2019-12-04 09:46:14.941 - info: zwave.0 Update zwave.0.NODE3
2019-12-04 09:46:15.044 - info: zwave.0 node ready nodeID: 16, nodeInfo: {"manufacturer":"Popp & Co","manufacturerid":"0x0154","product":"Smoke Detector and Siren","producttype":"0x0100","productid":"0x0201","type":"Smoke Alarm Sensor","name":"","loc":""}
2019-12-04 09:46:15.045 - info: zwave.0 Update zwave.0.NODE16
2019-12-04 09:46:15.138 - info: zwave.0 node ready nodeID: 24, nodeInfo: {"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGS223 Double Relay","producttype":"0x0203","productid":"0x1000","type":"On/Off Power Switch","name":"","loc":""}
2019-12-04 09:46:15.232 - info: zwave.0 node ready nodeID: 25, nodeInfo: {"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGS223 Double Relay","producttype":"0x0203","productid":"0x1000","type":"On/Off Power Switch","name":"","loc":""}
2019-12-04 09:46:15.233 - info: zwave.0 Update zwave.0.NODE25
2019-12-04 09:46:15.317 - info: zwave.0 node ready nodeID: 27, nodeInfo: {"manufacturer":"Popp & Co","manufacturerid":"0x0154","product":"Smoke Detector and Siren","producttype":"0x0100","productid":"0x0201","type":"Smoke Alarm Sensor","name":"","loc":""}
2019-12-04 09:46:15.317 - info: zwave.0 Update zwave.0.NODE27
2019-12-04 09:46:15.413 - info: zwave.0 node ready nodeID: 31, nodeInfo: {"manufacturer":"FIBARO System","manufacturerid":"0x010f","product":"FGWR111 Walli Roller Shutter","producttype":"0x1d01","productid":"0x1000","type":"Window Covering Endpoint Aware","name":"","loc":""}
2019-12-04 09:46:15.413 - info: zwave.0 Update zwave.0.NODE31
2019-12-04 09:46:15.496 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_2:_Switch_2 = undefined, index = 0, comClass = 37, instance = 2
2019-12-04 09:46:15.500 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_2:_Protection = undefined, index = 0, comClass = 117, instance = 2
2019-12-04 09:46:15.502 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_3:_Switch_3 = undefined, index = 0, comClass = 37, instance = 3
2019-12-04 09:46:15.504 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_3:_Protection = undefined, index = 0, comClass = 117, instance = 3
2019-12-04 09:46:15.505 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_4:_Switch_4 = undefined, index = 0, comClass = 37, instance = 4
2019-12-04 09:46:15.506 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_4:_Protection = undefined, index = 0, comClass = 117, instance = 4
2019-12-04 09:46:15.506 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_5:_Switch_5 = undefined, index = 0, comClass = 37, instance = 5
2019-12-04 09:46:15.507 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_5:_Protection = undefined, index = 0, comClass = 117, instance = 5
2019-12-04 09:46:15.508 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_6:_Switch_6 = undefined, index = 0, comClass = 37, instance = 6
2019-12-04 09:46:15.508 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_6:_Protection = undefined, index = 0, comClass = 117, instance = 6
2019-12-04 09:46:15.559 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_1:_Electric_-_kWh_1 = undefined, index = 0, comClass = 50, instance = 1
2019-12-04 09:46:15.562 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_1:_Electric_-_W_1 = undefined, index = 2, comClass = 50, instance = 1
2019-12-04 09:46:15.563 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_1:_Exporting_1 = undefined, index = 256, comClass = 50, instance = 1
2019-12-04 09:46:15.564 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_1:_Reset = undefined, index = 257, comClass = 50, instance = 1
2019-12-04 09:46:15.589 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_2:_Electric_-_kWh_2 = undefined, index = 0, comClass = 50, instance = 2
2019-12-04 09:46:15.591 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_2:_Electric_-_W_2 = undefined, index = 2, comClass = 50, instance = 2
2019-12-04 09:46:15.592 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_2:_Exporting_2 = undefined, index = 256, comClass = 50, instance = 2
2019-12-04 09:46:15.593 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_2:_Reset = undefined, index = 257, comClass = 50, instance = 2
2019-12-04 09:46:15.625 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_3:_Electric_-_kWh_3 = undefined, index = 0, comClass = 50, instance = 3
2019-12-04 09:46:15.629 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_3:_Electric_-_W_3 = undefined, index = 2, comClass = 50, instance = 3
2019-12-04 09:46:15.631 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_3:_Exporting_3 = undefined, index = 256, comClass = 50, instance = 3
2019-12-04 09:46:15.631 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_3:_Reset = undefined, index = 257, comClass = 50, instance = 3
2019-12-04 09:46:15.665 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_4:_Electric_-_kWh_4 = undefined, index = 0, comClass = 50, instance = 4
2019-12-04 09:46:15.668 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_4:_Electric_-_W_4 = undefined, index = 2, comClass = 50, instance = 4
2019-12-04 09:46:15.671 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_4:_Exporting_4 = undefined, index = 256, comClass = 50, instance = 4
2019-12-04 09:46:15.672 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_4:_Reset = undefined, index = 257, comClass = 50, instance = 4
2019-12-04 09:46:15.709 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_5:_Electric_-_kWh_5 = undefined, index = 0, comClass = 50, instance = 5
2019-12-04 09:46:15.711 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_5:_Electric_-_W_5 = undefined, index = 2, comClass = 50, instance = 5
2019-12-04 09:46:15.712 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_5:_Exporting_5 = undefined, index = 256, comClass = 50, instance = 5
2019-12-04 09:46:15.713 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_5:_Reset = undefined, index = 257, comClass = 50, instance = 5
2019-12-04 09:46:15.750 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_6:_Electric_-_kWh_6 = undefined, index = 0, comClass = 50, instance = 6
2019-12-04 09:46:15.752 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_6:_Electric_-_W_6 = undefined, index = 2, comClass = 50, instance = 6
2019-12-04 09:46:15.753 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_6:_Exporting_6 = undefined, index = 256, comClass = 50, instance = 6
2019-12-04 09:46:15.754 - info: zwave.0 State created: zwave.0.NODE15.METER.Instance_6:_Reset = undefined, index = 257, comClass = 50, instance = 6
2019-12-04 09:46:16.113 - info: zwave.0 State created: zwave.0.NODE15.PROTECTION.Instance_1:_Protection = undefined, index = 0, comClass = 117, instance = 1
2019-12-04 09:46:16.356 - info: zwave.0 State created: zwave.0.NODE15.SWITCH_BINARY.Instance_1:_Switch_1 = undefined, index = 0, comClass = 37, instance = 1
2019-12-04 09:46:17.203 - info: zwave.0 node ready nodeID: 15, nodeInfo: {"manufacturer":"GreenWave Reality Inc","manufacturerid":"0x0099","product":"PowerNode 6 port","producttype":"0x0003","productid":"0x0004","type":"Binary Power Switch","name":"","loc":""}
2019-12-04 09:46:17.218 - info: zwave.0 Scan completed

cburghardt

schrieb am

#89

@smudu said in Test Adapter z-wave v1.6.x:

Ich habe heute nochmals versucht das, mehr oder weniger erfolgreich, zu reproduzieren

Neustart der Z-Wave Instanz > Ok
Kompletter Neustart Raspi > Ok
Info Aktualisieren bei Node 24 (Fibaro Doppelschalter) > Ok, die Instanz bleibt dabei grün/wird nicht neu gestartet!
Laut Log werden auch nur die Datenpunkte für diese Node aktualisiert.
Info Aktualisieren bei Node 15 (Greenwave 6-fach Steckdose) > Fehler
Die Zwave Instanz startet drei mal neu und macht dabei ein Update aller Nodes. Warum aber neben Node 15 nur nochmals für Node 24 alle Datenpunkte aktualisiert werden erschließt sich mir nicht.

Wie gesagt: bei der node sind fehlerhafte Daten in dem openzwave XML file, in diesem Fall eine falsche ValueId. openzwave wirft nen Fehler. openzwave-shared kann damit leider nicht umgehen und Crasht. Folge: der adapter startet komplett neu.
Lösung: probiere es mit einem refresh der betroffenen node. Im Härtefall exkludieren und neu inkludieren. Ist nervig (ich weiß), aber da sind mir die Hände aus Adapter-Sicht gebunden.

Bei einer 6-fach Steckdose mit Messung kommt einiges an Datenpunkten zusammen, vielleicht ein Timeout Problem?

Was mir wichtig ist, dass die Fensterkontakte jetzt trotz der Neustarts immer noch ihren Status korrekt melden. Damit kann ich leben.
Für das OZW log muss ich mir noch was einfallen lassen. Es gibt kein logrotate und es wird bei jedem Neustart der Instanz neu erstellt

Warum brauchst du das log? Das ist nur zum debugging und sollte normal ausgeschaltet sein.

M Offline
M Offline
maloross

schrieb am zuletzt editiert von

#90

Falls meine Frage nicht im richtigen Thread ist, bitte verschieben.

Ist vorgesehen, eine Backup-Funktion des Controllers einzubauen?
Auch Frauen können sich für Technik begeistern! ;)

Equipment:
diverse HM-, HMIP-, Aeotec- Tradfri- Sonos- und Fibaro-Geräte, Master-/Slavesystem auf 2 Raspi4, NAS
A 1 Antwort Letzte Antwort

0
M maloross

Falls meine Frage nicht im richtigen Thread ist, bitte verschieben.

Ist vorgesehen, eine Backup-Funktion des Controllers einzubauen?
A Offline
A Offline
arteck
Developer Most Active
schrieb am zuletzt editiert von

#91

@maloross wie ne backup funktion ?? der Stick mekrt sich die Nodes und lat den baut der Adapter die Geräteliste auf.. was willst du da mit einem Backup.. zieh den stick ab pack den woanders rein und die Geräte laufen an diesem
zigbee hab ich, zwave auch, nuc's genauso und HA auch
M 1 Antwort Letzte Antwort

0
A arteck

@maloross wie ne backup funktion ?? der Stick mekrt sich die Nodes und lat den baut der Adapter die Geräteliste auf.. was willst du da mit einem Backup.. zieh den stick ab pack den woanders rein und die Geräte laufen an diesem
M Offline
M Offline
maloross

schrieb am zuletzt editiert von maloross

#92

@arteck und wenn der Stick mal defekt ist? Es geht mir darum, die Daten des Sticks auf ein baugleiches Gerät übertragen zu können.
Auch Frauen können sich für Technik begeistern! ;)

Equipment:
diverse HM-, HMIP-, Aeotec- Tradfri- Sonos- und Fibaro-Geräte, Master-/Slavesystem auf 2 Raspi4, NAS
A 1 Antwort Letzte Antwort

0
M maloross

@arteck und wenn der Stick mal defekt ist? Es geht mir darum, die Daten des Sticks auf ein baugleiches Gerät übertragen zu können.
A Offline
A Offline
arteck
Developer Most Active
schrieb am zuletzt editiert von

#93

@maloross ist mir nicht bekannt das es gehen würde/sollte
zigbee hab ich, zwave auch, nuc's genauso und HA auch
M 1 Antwort Letzte Antwort

0
A arteck

@maloross ist mir nicht bekannt das es gehen würde/sollte
M Offline
M Offline
maloross

schrieb am zuletzt editiert von

#94
@arteck ```
Die Z-Wave.Me Lösung
Alle Z-Wave-Controller von Z-Wave.Me und seinen OEM-Partner, bieten eine Z-Wave-Netzwerk Backup-und Restore-Funktion, um dieses Problem zu überwinden.
Die Firmware im USB Stick der Gateway-Hardware bietet eine Erweiterung, die das Klonen eines vorhandenen Controller in ein neues Gerät ermöglicht. Die Z-Wave Expert-UI zeigt diese Erweiterung als eine Funktionen der Hardware (Zum Netzwerk – Controller-Info Unterteil, ZMERestore (0xF3))
Auch Frauen können sich für Technik begeistern! ;)

Equipment:
diverse HM-, HMIP-, Aeotec- Tradfri- Sonos- und Fibaro-Geräte, Master-/Slavesystem auf 2 Raspi4, NAS
A 1 Antwort Letzte Antwort

0
M maloross
@arteck ```
Die Z-Wave.Me Lösung
Alle Z-Wave-Controller von Z-Wave.Me und seinen OEM-Partner, bieten eine Z-Wave-Netzwerk Backup-und Restore-Funktion, um dieses Problem zu überwinden.
Die Firmware im USB Stick der Gateway-Hardware bietet eine Erweiterung, die das Klonen eines vorhandenen Controller in ein neues Gerät ermöglicht. Die Z-Wave Expert-UI zeigt diese Erweiterung als eine Funktionen der Hardware (Zum Netzwerk – Controller-Info Unterteil, ZMERestore (0xF3))
A Offline
A Offline
arteck
Developer Most Active
schrieb am zuletzt editiert von

#95

@maloross na dann hast du dein backup den du anlegen kannst.. da musst du selber aktiv werden..da bestmmt nicht ALLE so funktionieren werden und es keine globale Lösung für gibt
zigbee hab ich, zwave auch, nuc's genauso und HA auch
M 1 Antwort Letzte Antwort

0
A arteck

@maloross na dann hast du dein backup den du anlegen kannst.. da musst du selber aktiv werden..da bestmmt nicht ALLE so funktionieren werden und es keine globale Lösung für gibt
M Offline
M Offline
maloross

schrieb am zuletzt editiert von

#96

@arteck bisher habe ich diese Funktion nicht gefunden, es gab keine Software zum Stick.
Auch Frauen können sich für Technik begeistern! ;)

Equipment:
diverse HM-, HMIP-, Aeotec- Tradfri- Sonos- und Fibaro-Geräte, Master-/Slavesystem auf 2 Raspi4, NAS
C 1 Antwort Letzte Antwort

0
M maloross

@arteck bisher habe ich diese Funktion nicht gefunden, es gab keine Software zum Stick.
C Offline
C Offline
cburghardt

schrieb am zuletzt editiert von

#97

@maloross es gibt keine generische Schnittstelle zum backup der controller. Der Aeon hat beispielsweise ein eigenes Windows Tool zur Sicherung. Somit wird der z-wave Adapter so etwas auch nicht unterstützen können.
M 1 Antwort Letzte Antwort

0
C cburghardt

@maloross es gibt keine generische Schnittstelle zum backup der controller. Der Aeon hat beispielsweise ein eigenes Windows Tool zur Sicherung. Somit wird der z-wave Adapter so etwas auch nicht unterstützen können.
M Offline
M Offline
maloross

schrieb am zuletzt editiert von

#98

@cburghardt ok danke für die Info, also hier müsste dann eine spezifische Software des Herstellers diese Aufgabe übernehmen.
Da hier so fleißig gebastelt wird und ihr so viele Funktionen einbaut, hatte ich angenommen, sowas würde auch gehen.
Auch Frauen können sich für Technik begeistern! ;)

Equipment:
diverse HM-, HMIP-, Aeotec- Tradfri- Sonos- und Fibaro-Geräte, Master-/Slavesystem auf 2 Raspi4, NAS
1 Antwort Letzte Antwort

0
A Offline
A Offline
AlCalzone
Developer
schrieb am zuletzt editiert von

#99

Es gibt Methoden im Z-Wave Standard zur Controller-Replikation. Wie genau die funktionieren, und ob die in OZW implementiert sind, weiß ich allerdings nicht.
Warum `sudo` böse ist: https://forum.iobroker.net/post/17109
1 Antwort Letzte Antwort

0
E Offline
E Offline
easybeat

schrieb am zuletzt editiert von

#100

Ich habe Heute nochmal einen Versuch unternommen meinen ZWave Adapter von 1.3.1 auf 1.6.3 upzudaten. Das Update wurde zwar durchgeführt. Jedoch erhalte ich jetzt eine Fehlermeldung:

Danach konnte ich auch nicht mehr zurück auf 1.3.1

Ausserdem habe ich weiter unten gelesen, dass sich die Datenpunkte ab 1.4.x ändern. Ist dem wirklich so? Ich habe über 40 Zwave Geräte und müsste dann in meiner Logik alle anpassen...da bleib ich wohl lieber einfach auf 1.3.1

Hat irgend jemand Ansatzpunkte wie ich das Problem lösen kann?

Danke und Gruss
Beat
A 1 Antwort Letzte Antwort

0
E easybeat

Ich habe Heute nochmal einen Versuch unternommen meinen ZWave Adapter von 1.3.1 auf 1.6.3 upzudaten. Das Update wurde zwar durchgeführt. Jedoch erhalte ich jetzt eine Fehlermeldung:

Danach konnte ich auch nicht mehr zurück auf 1.3.1

Ausserdem habe ich weiter unten gelesen, dass sich die Datenpunkte ab 1.4.x ändern. Ist dem wirklich so? Ich habe über 40 Zwave Geräte und müsste dann in meiner Logik alle anpassen...da bleib ich wohl lieber einfach auf 1.3.1

Hat irgend jemand Ansatzpunkte wie ich das Problem lösen kann?

Danke und Gruss
Beat
A Offline
A Offline
AlCalzone
Developer
schrieb am zuletzt editiert von

#101

@easybeat sagte in Test Adapter z-wave v1.6.x:

Hat irgend jemand Ansatzpunkte wie ich das Problem lösen kann?

Ja, steht in der Adapter-README beschrieben: https://github.com/iobroker/iobroker.zwave#known-issues
Warum `sudo` böse ist: https://forum.iobroker.net/post/17109
1 Antwort Letzte Antwort

0

Anmelden zum Antworten

Support us

598

Online

32.4k

Benutzer

81.4k

Themen

1.3m

Beiträge