Инсталляция под Linux
-
Попробуй: sudo npm install iobroker
4867_skript.jpg -
Попробуй: sudo npm install iobroker `
Я все запускал от root-а.Все оказалось очень просто…
Установка node из репозитория.
chmod 777 /opt/iobroker
и ссылка на "node" с помощью команды "sudo ln -s /usr/bin/nodejs /usr/bin/node"
После этого
npm install iobroker
Прошла как по маслу...
Спасибо.
-
Надо внести в инструкцию:
` > Firts check if node.js is installed. You can do it with commandnode -v.If you got an answer, you can continue with the installation.
If not. Try to install node.js with
apt-get install nodejs.Sometimes node.js has not installed the soft link. If you see outputs with
/usr/bin/nodejs -v, following can help:ln -s /usr/bin/nodejs /usr/bin/node` -
Подскажите, как починить?
вкладка "драйвера" пустая.
upd:
вкладка "сервера" тоже пустая.
А в настройках все штатно: `
Вот при каждой попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает? -
Подскажите, как починить?
вкладка "драйвера" пустая.
upd:
вкладка "сервера" тоже пустая.
А в настройках все штатно:
Вот при ****каждой**** попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает?
Попробуй поиграться с правами на папку iobroker. Мне помогло вроде… -
Сегодня "пал смертью храбрых" хард на неттопе где крутился iobroker, вагон бедов
Отсель вопрос как быстро натянуть назад iobroker, ставил в первые версии, всё руками и исходников, что изменилось
Сори ,что спрашиваю не перелопатив ветки и вики.
-
Поменял хард, накатил debian 8.2.0, node, ставлю iobroker и получаю вагон варнингов и ошибок
Может чего не установилось или забыл поставить, прошлый раз ноду собирал из сырцов, сейчас водрузил с репо
! ````
root@SmartHome:/opt/iobroker# npm install iobrokeriobroker@0.5.6 install /opt/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debiannpm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debiannpm WARN optional dep failed, continuing bufferutil@1.2.1
Non-critical error: EISDIR, illegal operation on a directory '/opt/node_modules/iobroker/lib/../../../iobroker'
iobroker@0.5.6 ../node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker#! ````
-
При помощи буна,гугла и какой-то матери я его поставил.
8294_zwite_log.txt -
Вобщем встал криво, по моему что-то не то с кодировкой
! ````
root@SmartHome:/opt/iobroker# npm install iobroker
npm ERR! not a package /tmp/npm-1594-psWTuwUR/1446747427997-0.4993789638392627/tmp.tgziobroker@0.5.6 install /opt/iobroker/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt/iobroker
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debiannpm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt/iobroker
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.DebianIn file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error:makefailed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debiannpm WARN optional dep failed, continuing bufferutil@1.2.1
Write "./iobroker start" to start the ioBroker
Auto-start was enabled. Write "update-rc.d -f iobroker.sh remove" to disable auto-start
iobroker is started. Go to "http://ip-addr:8081" to open the admin UI.
iobroker@0.5.6 node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker# node -v
v0.10.29! ````
Копаю дальше, натянул виз, не открывается -
Привет всем
Вчера мучался пол дня с установкой Iobroker на Debian, сначала думал может какие проблемы с 8.2 (кстати nodejs есть в репозитариях) накатил 7.9 та же фигня ошибок и варнингов при установке кучи. Перечитал все способы установки и вуаля.
Debian 8.2 чистый под "root"
apt-get update apt-get upgrade apt-get install curl apt-get install build-essential curl -sL https://deb.nodesource.com/setup | bash - apt-get install nodejs mkdir /opt/iobroker chmod 777 /opt/iobroker cd /opt/iobroker npm install iobrokerПроблемы с nodejs и npm в репозитах они старые и с кодировкой чего то не то если кому пригодится отпешитесь о результатах
Вопрос к Bluefox не приходят обновления драйверов всё остальное как часы?
! root@Server1:~# cd /opt/iobroker
! root@Server1:/opt/iobroker# iobroker update
! update done
! Adapter "zwave" : 0.2.3
! Adapter "yr" : 0.1.9 , installed 0.1.9
! Adapter "wolf" : 0.0.9
! Adapter "web" : 1.2.1 , installed 1.2.1
! Adapter "vis-timeandweather": 0.0.2 , installed 0.0.2
! Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
! Adapter "vis-plumb" : 0.1.6
! Adapter "vis-metro" : 0.1.9
! Adapter "vis-lcars" : 0.1.6
! Adapter "vis-keyboard" : 0.0.2
! Adapter "vis-jqui-mfd" : 0.1.0
! Adapter "vis-hqwidgets" : 0.2.2 , installed 0.2.2
! Adapter "vis-google-fonts": 0.1.0
! Adapter "vis-fancyswitch": 0.1.0
! Adapter "vis-colorpicker": 0.1.1
! Adapter "vis-bars" : 0.1.1
! Adapter "vis" : 0.7.7 , installed 0.7.7
! Adapter "terminal" : 0.1.2
! Adapter "sonos" : 0.1.7
! Adapter "rickshaw" : 0.2.2 , installed 0.2.2
! Adapter "pushover" : 0.1.1
! Adapter "pushbullet" : 0.0.11
! Adapter "owfs" : 0.0.2 , installed 0.0.2
! Adapter "onkyo" : 0.1.9
! Adapter "socketio" : 1.0.0
! Adapter "simple-api" : 1.0.0
! Adapter "scenes" : 0.2.2
! Adapter "sayit" : 0.3.15 , installed 0.3.15
! Adapter "s7" : 0.2.4
! Adapter "ping" : 0.1.4
! Adapter "node-red" : 0.3.5
! Adapter "mqtt" : 0.2.15
! Adapter "modbus" : 0.3.9
! Adapter "mobile" : 0.0.5
! Adapter "megad" : 1.0.6 , installed 1.0.6
! Adapter "knx" : 0.2.10
! Controller "js-controller" : 0.7.15 , installed 0.7.15
! Adapter "javascript" : 1.0.7 , installed 1.0.7
! Adapter "icons-ultimate-png": 0.1.0
! Adapter "icons-open-icon-library-png": 0.1.1
! Adapter "icons-mfd-svg" : 0.1.2
! Adapter "icons-mfd-png" : 0.1.2
! Adapter "icons-material-svg": 0.1.0
! Adapter "icons-material-png": 0.1.0
! Adapter "icons-addictive-flavour-png": 0.1.0
! Adapter "ical" : 1.1.1 , installed 1.1.1
! Adapter "hmm" : 1.0.0
! Adapter "hue" : 0.5.1
! Adapter "hm-rpc" : 0.5.2
! Adapter "hm-rega" : 0.2.2
! Adapter "history" : 0.1.3 , installed 0.1.3
! Adapter "harmony" : 0.5.4
! Adapter "example" : 0.1.1 , installed 0.1.1
! Adapter "fritzbox" : 0.2.1
! Adapter "flot" : 0.1.1 , installed 0.1.1
! Adapter "email" : 0.1.2
! Adapter "dwd" : 1.0.1
! Adapter "cul" : 0.0.4
! Adapter "b-control-em" : 0.1.1
! Adapter "artnet" : 0.0.3
! Adapter "admin" : 0.6.6 , installed 0.6.6 -
Привет всем
Вчера мучался пол дня с установкой Iobroker на Debian, сначала думал может какие проблемы с 8.2 (кстати nodejs есть в репозитариях) накатил 7.9 та же фигня ошибок и варнингов при установке кучи. Перечитал все способы установки и вуаля.
Debian 8.2 чистый под "root"
apt-get update apt-get upgrade apt-get install curl apt-get install build-essential curl -sL https://deb.nodesource.com/setup | bash - apt-get install nodejs mkdir /opt/iobroker chmod 777 /opt/iobroker cd /opt/iobroker npm install iobrokerПроблемы с nodejs и npm в репозитах они старые и с кодировкой чего то не то если кому пригодится отпешитесь о результатах
Вопрос к Bluefox не приходят обновления драйверов всё остальное как часы?
! root@Server1:~# cd /opt/iobroker
! root@Server1:/opt/iobroker# iobroker update
! update done
! Adapter "zwave" : 0.2.3
! Adapter "yr" : 0.1.9 , installed 0.1.9
! Adapter "wolf" : 0.0.9
! Adapter "web" : 1.2.1 , installed 1.2.1
! Adapter "vis-timeandweather": 0.0.2 , installed 0.0.2
! Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
! Adapter "vis-plumb" : 0.1.6
! Adapter "vis-metro" : 0.1.9
! Adapter "vis-lcars" : 0.1.6
! Adapter "vis-keyboard" : 0.0.2
! Adapter "vis-jqui-mfd" : 0.1.0
! Adapter "vis-hqwidgets" : 0.2.2 , installed 0.2.2
! Adapter "vis-google-fonts": 0.1.0
! Adapter "vis-fancyswitch": 0.1.0
! Adapter "vis-colorpicker": 0.1.1
! Adapter "vis-bars" : 0.1.1
! Adapter "vis" : 0.7.7 , installed 0.7.7
! Adapter "terminal" : 0.1.2
! Adapter "sonos" : 0.1.7
! Adapter "rickshaw" : 0.2.2 , installed 0.2.2
! Adapter "pushover" : 0.1.1
! Adapter "pushbullet" : 0.0.11
! Adapter "owfs" : 0.0.2 , installed 0.0.2
! Adapter "onkyo" : 0.1.9
! Adapter "socketio" : 1.0.0
! Adapter "simple-api" : 1.0.0
! Adapter "scenes" : 0.2.2
! Adapter "sayit" : 0.3.15 , installed 0.3.15
! Adapter "s7" : 0.2.4
! Adapter "ping" : 0.1.4
! Adapter "node-red" : 0.3.5
! Adapter "mqtt" : 0.2.15
! Adapter "modbus" : 0.3.9
! Adapter "mobile" : 0.0.5
! Adapter "megad" : 1.0.6 , installed 1.0.6
! Adapter "knx" : 0.2.10
! Controller "js-controller" : 0.7.15 , installed 0.7.15
! Adapter "javascript" : 1.0.7 , installed 1.0.7
! Adapter "icons-ultimate-png": 0.1.0
! Adapter "icons-open-icon-library-png": 0.1.1
! Adapter "icons-mfd-svg" : 0.1.2
! Adapter "icons-mfd-png" : 0.1.2
! Adapter "icons-material-svg": 0.1.0
! Adapter "icons-material-png": 0.1.0
! Adapter "icons-addictive-flavour-png": 0.1.0
! Adapter "ical" : 1.1.1 , installed 1.1.1
! Adapter "hmm" : 1.0.0
! Adapter "hue" : 0.5.1
! Adapter "hm-rpc" : 0.5.2
! Adapter "hm-rega" : 0.2.2
! Adapter "history" : 0.1.3 , installed 0.1.3
! Adapter "harmony" : 0.5.4
! Adapter "example" : 0.1.1 , installed 0.1.1
! Adapter "fritzbox" : 0.2.1
! Adapter "flot" : 0.1.1 , installed 0.1.1
! Adapter "email" : 0.1.2
! Adapter "dwd" : 1.0.1
! Adapter "cul" : 0.0.4
! Adapter "b-control-em" : 0.1.1
! Adapter "artnet" : 0.0.3
! Adapter "admin" : 0.6.6 , installed 0.6.6 `Сам себе и отвечу
Нет обновлений.
На гите рабочие версии, которые ни в коем случае нельзя устанавливать, если не знаешь javascript.
Процесс разработки следующий. Я сначала заливаю версию на гит (она может быть и не рабочей). Потом прошу пользователей, кто не боится трудностей и способен определить проблемы установить эти версии специальной командой.
Если у них бежит, то я заливаю версию на npm и вот оттуда она доступна всем.
Почему у тебя показываются версии с гита надо ещё выяснить.
Рабочую версию, кстати, можно посмотреть здесь http://iobroker.net:8081 и http://iobroker.net:8082/vis/edit.html
-
Пытаюсь установить iobroker на bananapi образ http://www.armbian.com/banana-pi/.
NodeJS и NPM https://github.com/nodejs/node-v0.x-archive/wiki/Installing-Node.js-via-package-manager#debian-and-ubuntu-based-linux-distributions без проблем:
root@bananapi:/# nodejs -v v5.1.1 root@bananapi:/# npm -v 3.3.12 root@bananapi:/#Затем:
$ cd /opt $ mkdir iobroker $ cd iobroker $ sudo npm install iobrokerОшибка:
50_pic_32.jpg -
sudo npm install iobroker `
Тоже самое.Даже пробовал:
root@bananapi:/opt/iobroker# ln -s /usr/bin/nodejs /usr/bin/node ln: failed to create symbolic link ‘/usr/bin/node’: File exists root@bananapi:/opt/iobroker#Говорит ссылка уже есть…
Я так понимаю, что нет прав на запись?
Хотя директорию node_modules и вложенные в нее создает...
50_pic_33.jpg
50_pic_34.jpg -
А если
sudo npm install iobroker --unsafe-perm ```` `Вроде прокатило))
Устанавливаю драйвера…
50_pic_35.jpg
7614_screenshot_2018-10-18_21.29.09.png
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren AnmeldenSupport us
440
Online32.8k
Benutzer82.7k
Themen1.3m
Beiträge