Monatsrückblick Januar/Februar 2026 ist online!

[aurodionov]

Поменял хард, накатил debian 8.2.0, node, ставлю iobroker и получаю вагон варнингов и ошибок

Может чего не установилось или забыл поставить, прошлый раз ноду собирал из сырцов, сейчас водрузил с репо

! ````
root@SmartHome:/opt/iobroker# npm install iobroker

iobroker@0.5.6 install /opt/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
Non-critical error: EISDIR, illegal operation on a directory '/opt/node_modules/iobroker/lib/../../../iobroker'
iobroker@0.5.6 ../node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker#

! ````

[aurodionov]

При помощи буна,гугла и какой-то матери я его поставил.
8294_zwite_log.txt

[Bluefox]

А что было то?

[aurodionov]

Вобщем встал криво, по моему что-то не то с кодировкой

! ````
root@SmartHome:/opt/iobroker# npm install iobroker
npm ERR! not a package /tmp/npm-1594-psWTuwUR/1446747427997-0.4993789638392627/tmp.tgz

iobroker@0.5.6 install /opt/iobroker/node_modules/iobroker
node lib/setup.js
! npm install iobroker.js-controller --production --prefix /opt/iobroker
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.js-controller/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
npm install iobroker.admin --production --prefix /opt/iobroker
npm WARN engine hawk@3.1.0: wanted: {"node":">=0.10.32"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine hoek@2.16.3: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine boom@2.10.1: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
npm WARN engine cryptiles@2.0.5: wanted: {"node":">=0.10.40"} (current: {"node":"0.10.29","npm":"1.4.21"})
In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/engine.io/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/validation.cc:15:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/validation/src/validation.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/utf-8-validate
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing bufferutil@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

In file included from ../src/bufferutil.cc:16:0:
../node_modules/nan/nan.h:328:47: error: ‘REPLACE_INVALID_UTF8’ is not a member of ‘v8::String’
static const unsigned kReplaceInvalidUtf8 = v8::String::REPLACE_INVALID_UTF8;
^
make: *** [Release/obj.target/bufferutil/src/bufferutil.o] Ошибка 1
gyp ERR! build error
gyp ERR! stack Error: make failed with exit code: 2
gyp ERR! stack at ChildProcess.onExit (/usr/share/node-gyp/lib/build.js:267:23)
gyp ERR! stack at ChildProcess.emit (events.js:98:17)
gyp ERR! stack at Process.ChildProcess._handle.onexit (child_process.js:809:12)
gyp ERR! System Linux 3.16.0-4-686-pae
gyp ERR! command "nodejs" "/usr/bin/node-gyp" "rebuild"
gyp ERR! cwd /opt/iobroker/node_modules/iobroker.admin/node_modules/socket.io/node_modules/socket.io-client/node_modules/engine.io-client/node_modules/ws/node_modules/bufferutil
gyp ERR! node -v v0.10.29
gyp ERR! node-gyp -v v0.12.2
gyp ERR! not ok
npm WARN optional dep failed, continuing utf-8-validate@1.2.1
npm WARN This failure might be due to the use of legacy binary "node"
npm WARN For further explanations, please read
/usr/share/doc/nodejs/README.Debian

npm WARN optional dep failed, continuing bufferutil@1.2.1
Write "./iobroker start" to start the ioBroker
Auto-start was enabled. Write "update-rc.d -f iobroker.sh remove" to disable auto-start
iobroker is started. Go to "http://ip-addr:8081" to open the admin UI.
iobroker@0.5.6 node_modules/iobroker
└── yargs@1.2.6 (minimist@0.1.0)
root@SmartHome:/opt/iobroker# node -v
v0.10.29

! ````
Копаю дальше, натянул виз, не открывается

[Haus]

Привет всем

Вчера мучался пол дня с установкой Iobroker на Debian, сначала думал может какие проблемы с 8.2 (кстати nodejs есть в репозитариях) накатил 7.9 та же фигня ошибок и варнингов при установке кучи. Перечитал все способы установки и вуаля.

Debian 8.2 чистый под "root"

apt-get update
apt-get upgrade
apt-get install curl
apt-get install build-essential
curl -sL https://deb.nodesource.com/setup | bash -
apt-get install nodejs
mkdir /opt/iobroker
chmod 777 /opt/iobroker
cd /opt/iobroker
npm install iobroker

Проблемы с nodejs и npm в репозитах они старые и с кодировкой чего то не то если кому пригодится отпешитесь о результатах

Вопрос к Bluefox не приходят обновления драйверов всё остальное как часы?

! root@Server1:~# cd /opt/iobroker
! root@Server1:/opt/iobroker# iobroker update
! update done
! Adapter "zwave" : 0.2.3
! Adapter "yr" : 0.1.9 , installed 0.1.9
! Adapter "wolf" : 0.0.9
! Adapter "web" : 1.2.1 , installed 1.2.1
! Adapter "vis-timeandweather": 0.0.2 , installed 0.0.2
! Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
! Adapter "vis-plumb" : 0.1.6
! Adapter "vis-metro" : 0.1.9
! Adapter "vis-lcars" : 0.1.6
! Adapter "vis-keyboard" : 0.0.2
! Adapter "vis-jqui-mfd" : 0.1.0
! Adapter "vis-hqwidgets" : 0.2.2 , installed 0.2.2
! Adapter "vis-google-fonts": 0.1.0
! Adapter "vis-fancyswitch": 0.1.0
! Adapter "vis-colorpicker": 0.1.1
! Adapter "vis-bars" : 0.1.1
! Adapter "vis" : 0.7.7 , installed 0.7.7
! Adapter "terminal" : 0.1.2
! Adapter "sonos" : 0.1.7
! Adapter "rickshaw" : 0.2.2 , installed 0.2.2
! Adapter "pushover" : 0.1.1
! Adapter "pushbullet" : 0.0.11
! Adapter "owfs" : 0.0.2 , installed 0.0.2
! Adapter "onkyo" : 0.1.9
! Adapter "socketio" : 1.0.0
! Adapter "simple-api" : 1.0.0
! Adapter "scenes" : 0.2.2
! Adapter "sayit" : 0.3.15 , installed 0.3.15
! Adapter "s7" : 0.2.4
! Adapter "ping" : 0.1.4
! Adapter "node-red" : 0.3.5
! Adapter "mqtt" : 0.2.15
! Adapter "modbus" : 0.3.9
! Adapter "mobile" : 0.0.5
! Adapter "megad" : 1.0.6 , installed 1.0.6
! Adapter "knx" : 0.2.10
! Controller "js-controller" : 0.7.15 , installed 0.7.15
! Adapter "javascript" : 1.0.7 , installed 1.0.7
! Adapter "icons-ultimate-png": 0.1.0
! Adapter "icons-open-icon-library-png": 0.1.1
! Adapter "icons-mfd-svg" : 0.1.2
! Adapter "icons-mfd-png" : 0.1.2
! Adapter "icons-material-svg": 0.1.0
! Adapter "icons-material-png": 0.1.0
! Adapter "icons-addictive-flavour-png": 0.1.0
! Adapter "ical" : 1.1.1 , installed 1.1.1
! Adapter "hmm" : 1.0.0
! Adapter "hue" : 0.5.1
! Adapter "hm-rpc" : 0.5.2
! Adapter "hm-rega" : 0.2.2
! Adapter "history" : 0.1.3 , installed 0.1.3
! Adapter "harmony" : 0.5.4
! Adapter "example" : 0.1.1 , installed 0.1.1
! Adapter "fritzbox" : 0.2.1
! Adapter "flot" : 0.1.1 , installed 0.1.1
! Adapter "email" : 0.1.2
! Adapter "dwd" : 1.0.1
! Adapter "cul" : 0.0.4
! Adapter "b-control-em" : 0.1.1
! Adapter "artnet" : 0.0.3
! Adapter "admin" : 0.6.6 , installed 0.6.6

[Haus]

@Haus:

Привет всем

Вчера мучался пол дня с установкой Iobroker на Debian, сначала думал может какие проблемы с 8.2 (кстати nodejs есть в репозитариях) накатил 7.9 та же фигня ошибок и варнингов при установке кучи. Перечитал все способы установки и вуаля.

Debian 8.2 чистый под "root"

apt-get update
apt-get upgrade
apt-get install curl
apt-get install build-essential
curl -sL https://deb.nodesource.com/setup | bash -
apt-get install nodejs
mkdir /opt/iobroker
chmod 777 /opt/iobroker
cd /opt/iobroker
npm install iobroker

Проблемы с nodejs и npm в репозитах они старые и с кодировкой чего то не то если кому пригодится отпешитесь о результатах

Вопрос к Bluefox не приходят обновления драйверов всё остальное как часы?

! root@Server1:~# cd /opt/iobroker
! root@Server1:/opt/iobroker# iobroker update
! update done
! Adapter "zwave" : 0.2.3
! Adapter "yr" : 0.1.9 , installed 0.1.9
! Adapter "wolf" : 0.0.9
! Adapter "web" : 1.2.1 , installed 1.2.1
! Adapter "vis-timeandweather": 0.0.2 , installed 0.0.2
! Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2
! Adapter "vis-plumb" : 0.1.6
! Adapter "vis-metro" : 0.1.9
! Adapter "vis-lcars" : 0.1.6
! Adapter "vis-keyboard" : 0.0.2
! Adapter "vis-jqui-mfd" : 0.1.0
! Adapter "vis-hqwidgets" : 0.2.2 , installed 0.2.2
! Adapter "vis-google-fonts": 0.1.0
! Adapter "vis-fancyswitch": 0.1.0
! Adapter "vis-colorpicker": 0.1.1
! Adapter "vis-bars" : 0.1.1
! Adapter "vis" : 0.7.7 , installed 0.7.7
! Adapter "terminal" : 0.1.2
! Adapter "sonos" : 0.1.7
! Adapter "rickshaw" : 0.2.2 , installed 0.2.2
! Adapter "pushover" : 0.1.1
! Adapter "pushbullet" : 0.0.11
! Adapter "owfs" : 0.0.2 , installed 0.0.2
! Adapter "onkyo" : 0.1.9
! Adapter "socketio" : 1.0.0
! Adapter "simple-api" : 1.0.0
! Adapter "scenes" : 0.2.2
! Adapter "sayit" : 0.3.15 , installed 0.3.15
! Adapter "s7" : 0.2.4
! Adapter "ping" : 0.1.4
! Adapter "node-red" : 0.3.5
! Adapter "mqtt" : 0.2.15
! Adapter "modbus" : 0.3.9
! Adapter "mobile" : 0.0.5
! Adapter "megad" : 1.0.6 , installed 1.0.6
! Adapter "knx" : 0.2.10
! Controller "js-controller" : 0.7.15 , installed 0.7.15
! Adapter "javascript" : 1.0.7 , installed 1.0.7
! Adapter "icons-ultimate-png": 0.1.0
! Adapter "icons-open-icon-library-png": 0.1.1
! Adapter "icons-mfd-svg" : 0.1.2
! Adapter "icons-mfd-png" : 0.1.2
! Adapter "icons-material-svg": 0.1.0
! Adapter "icons-material-png": 0.1.0
! Adapter "icons-addictive-flavour-png": 0.1.0
! Adapter "ical" : 1.1.1 , installed 1.1.1
! Adapter "hmm" : 1.0.0
! Adapter "hue" : 0.5.1
! Adapter "hm-rpc" : 0.5.2
! Adapter "hm-rega" : 0.2.2
! Adapter "history" : 0.1.3 , installed 0.1.3
! Adapter "harmony" : 0.5.4
! Adapter "example" : 0.1.1 , installed 0.1.1
! Adapter "fritzbox" : 0.2.1
! Adapter "flot" : 0.1.1 , installed 0.1.1
! Adapter "email" : 0.1.2
! Adapter "dwd" : 1.0.1
! Adapter "cul" : 0.0.4
! Adapter "b-control-em" : 0.1.1
! Adapter "artnet" : 0.0.3
! Adapter "admin" : 0.6.6 , installed 0.6.6 `

Сам себе и отвечу

Нет обновлений.

На гите рабочие версии, которые ни в коем случае нельзя устанавливать, если не знаешь javascript.

Процесс разработки следующий. Я сначала заливаю версию на гит (она может быть и не рабочей). Потом прошу пользователей, кто не боится трудностей и способен определить проблемы установить эти версии специальной командой.

Если у них бежит, то я заливаю версию на npm и вот оттуда она доступна всем.

Почему у тебя показываются версии с гита надо ещё выяснить.

Рабочую версию, кстати, можно посмотреть здесь http://iobroker.net:8081 и http://iobroker.net:8082/vis/edit.html

[electric69]

Пытаюсь установить iobroker на bananapi образ http://www.armbian.com/banana-pi/.

NodeJS и NPM https://github.com/nodejs/node-v0.x-archive/wiki/Installing-Node.js-via-package-manager#debian-and-ubuntu-based-linux-distributions без проблем:

root@bananapi:/# nodejs -v
v5.1.1
root@bananapi:/# npm -v
3.3.12
root@bananapi:/#

Затем:

$ cd /opt
$ mkdir iobroker
$ cd iobroker
$ sudo npm install iobroker

Ошибка:
50_pic_32.jpg

[Bluefox]

sudo npm install iobroker

[electric69]

@Bluefox:

sudo npm install iobroker `
Тоже самое.

Даже пробовал:

root@bananapi:/opt/iobroker# ln -s /usr/bin/nodejs /usr/bin/node
ln: failed to create symbolic link ‘/usr/bin/node’: File exists
root@bananapi:/opt/iobroker#

Говорит ссылка уже есть…

Я так понимаю, что нет прав на запись?

Хотя директорию node_modules и вложенные в нее создает...
50_pic_33.jpg
50_pic_34.jpg

[Bluefox]

А если

sudo npm install iobroker --unsafe-perm

?

[electric69]

@Bluefox:

А если

sudo npm install iobroker --unsafe-perm

```` `  

Вроде прокатило))

Устанавливаю драйвера…
50_pic_35.jpg
7614_screenshot_2018-10-18_21.29.09.png

[DAndre]

Здравствуйте.

CouchDB и Redis ставить?

[Bluefox]

Нет.

Но можешь поставить influxdb, если знаешь как.

[DAndre]

Как пишут умные люди–-

для 64-битных систем

$ wget http://s3.amazonaws.com/influxdb/influx ... _amd64.deb

$ sudo dpkg -i influxdb_latest_amd64.deb

для 32-битных систем

$ wget http://s3.amazonaws.com/influxdb/influx ... t_i386.deb

$ sudo dpkg -i influxdb_latest_i386.deb

По завершении установки запустим InfluxDB:

$ sudo /etc/init.d/influxdb start

[DAndre]

Веселье в разгаре

Last login: Sun Dec 20 18:44:57 2015 from homexp

xbmc@xbmc-desktop:~$ cd /opt/iobroker

xbmc@xbmc-desktop:/opt/iobroker$ sudo npm install iobroker

[sudo] password for xbmc:

npm http GET https://registry.npmjs.org/iobroker

npm http 304 https://registry.npmjs.org/iobroker

npm http GET https://registry.npmjs.org/yargs

npm http 304 https://registry.npmjs.org/yargs

npm http GET https://registry.npmjs.org/minimist

npm http 304 https://registry.npmjs.org/minimist

iobroker@0.5.6 install /opt/iobroker/node_modules/iobroker

node lib/setup.js

sh: 1: node: not found

npm WARN This failure might be due to the use of legacy binary "node"

npm WARN For further explanations, please read

/usr/share/doc/nodejs/README.Debian

npm ERR! weird error 127

npm ERR! not ok code 0

xbmc@xbmc-desktop:/opt/iobroker$

куда податся. sudo npm install iobroker –unsafe-perm тоже не катит :(

[Bluefox]

Команду node не находит.

Напиши

root@bananapi:/opt/iobroker# ln -s /usr/bin/nodejs /usr/bin/node

[DAndre]

@Bluefox:

Команду node не находит.

Напиши

root@bananapi:/opt/iobroker# ln -s /usr/bin/nodejs /usr/bin/node

```` `  

Есть. пошло. полетело ….......надолго ли

Спасиб. Пропишите для чайников.

ps Везде враги кругом засады :D sudo unit 6

[DAndre]

Системные настройки ==> репозитории

стер случайно.

Что туда вписать?

[Bluefox]

@DAndre:

Системные настройки ==> репозитории

стер случайно.

Что туда вписать? `

default  | conf/sources-dist.json
online   | https://raw.githubusercontent.com/ioBroker/ioBroker.js-controller/master/conf/sources-dist.json

[kID]

@ford7:

@ford7:

Подскажите, как починить?

вкладка "драйвера" пустая.

upd:

вкладка "сервера" тоже пустая.

А в настройках все штатно: Вот при ****каждой**** попытке обновления js-controller происходит такая штука. Приходится заново руками js-controller устанавливать. Может у меня чего-то не так установилось изначально или строки какой-нить не хватает?
Постигла та же самая печалька что и у ford7

Только кроме описанного им на вкладке драйвера висит серая надпись "обновление", перестает обновляться Log. т.е вначале сообщения идут, а затем исчезают и чистое окно. При ребуте машины в окошко лога высыпается несколько строк.

У меня лечится путем sudo iobroker restart, дальше все загружается и работает без глюков.

sudo chmod 777 /opt/iobroker делал не помогает.

По логу ни каких косяков не заметил.

Удалил все драйвера кроме admina все так же.

! 2015-12-21 19:21:09.067 - info: host.debian-srv iobroker.js-controller version 0.8.2 js-controller starting
! 2015-12-21 19:21:09.072 - info: host.debian-srv Copyright © 2014-2015 bluefox, hobbyquaker
! 2015-12-21 19:21:09.073 - info: host.debian-srv hostname: debian-srv
! 2015-12-21 19:21:09.073 - info: host.debian-srv ip addresses:
! 2015-12-21 19:21:09.096 - info: inMem-states listening on port 9000
! 2015-12-21 19:21:09.122 - info: inMem-objects listening on port 9001
! 2015-12-21 19:21:09.129 - info: host.debian-srv InMemoryDB connected
! 2015-12-21 19:21:09.136 - info: host.debian-srv 1 instance found
! 2015-12-21 19:21:09.137 - info: host.debian-srv starting 1 instance
! 2015-12-21 19:21:09.156 - info: host.debian-srv instance system.adapter.admin.0 started with pid 935
! 2015-12-21 19:21:11.834 - info: admin.0 starting. Version 0.7.2 in /opt/iobroker/node_modules/iobroker.admin
! 2015-12-21 19:21:11.916 - info: admin.0 requesting all states
! 2015-12-21 19:21:11.919 - info: admin.0 requesting all objects
! 2015-12-21 19:21:11.920 - info: admin.0 Request actual repository...
! 2015-12-21 19:21:11.924 - info: admin.0 http server listening on port 8081
! 2015-12-21 19:21:11.924 - info: admin.0 Use link "http://localhost:8081" to configure.
! 2015-12-21 19:21:12.146 - info: admin.0 received all states
! 2015-12-21 19:21:12.229 - info: admin.0 received all objects
! 2015-12-21 19:21:12.285 - info: host.debian-srv Update repository "default" under "conf/sources-dist.json"
! 2015-12-21 19:21:19.490 - info: admin.0 Repository received successfully.
! Все молчок :(
! sudo iobroker restart
! 2015-12-21 19:25:14.578 - info: host.debian-srv received SIGTERM
! 2015-12-21 19:25:14.579 - info: host.debian-srv stopInstance system.adapter.admin.0
! 2015-12-21 19:25:14.579 - info: host.debian-srv stopInstance system.adapter.admin.0 killing pid 935
! 2015-12-21 19:25:14.584 - info: admin.0 terminating http server on port 8081
! 2015-12-21 19:25:14.618 - info: admin.0 terminating
! 2015-12-21 19:25:14.646 - info: host.debian-srv instance system.adapter.admin.0 terminated with code 0 (OK)
! 2015-12-21 19:25:14.788 - info: host.debian-srv terminated
! 2015-12-21 19:25:15.590 - info: host.debian-srv received SIGTERM
! 2015-12-21 19:25:15.591 - info: host.debian-srv stopInstance system.adapter.admin.0
! 2015-12-21 19:25:15.591 - warn: host.debian-srv stopInstance system.adapter.admin.0 not running
! 2015-12-21 19:25:15.604 - info: host.debian-srv terminated
! 2015-12-21 19:25:17.376 - info: host.debian-srv iobroker.js-controller version 0.8.2 js-controller starting
! 2015-12-21 19:25:17.381 - info: host.debian-srv Copyright © 2014-2015 bluefox, hobbyquaker
! 2015-12-21 19:25:17.381 - info: host.debian-srv hostname: debian-srv
! 2015-12-21 19:25:17.381 - info: host.debian-srv ip addresses: 192.168.88.33 fe80::d250:99ff:fe76:6bdd
! 2015-12-21 19:25:17.396 - info: inMem-states listening on port 9000
! 2015-12-21 19:25:17.415 - info: inMem-objects listening on port 9001
! 2015-12-21 19:25:17.420 - info: host.debian-srv InMemoryDB connected
! 2015-12-21 19:25:17.425 - info: host.debian-srv 1 instance found
! 2015-12-21 19:25:17.426 - info: host.debian-srv starting 1 instance
! 2015-12-21 19:25:17.449 - info: host.debian-srv instance system.adapter.admin.0 started with pid 1061
! 2015-12-21 19:25:19.231 - info: admin.0 starting. Version 0.7.2 in /opt/iobroker/node_modules/iobroker.admin
! 2015-12-21 19:25:19.292 - info: admin.0 requesting all states
! 2015-12-21 19:25:19.296 - info: admin.0 requesting all objects
! 2015-12-21 19:25:19.298 - info: admin.0 Request actual repository...
! 2015-12-21 19:25:19.300 - info: admin.0 http server listening on port 8081
! 2015-12-21 19:25:19.300 - info: admin.0 Use link "http://localhost:8081" to configure.
! 2015-12-21 19:25:19.485 - info: admin.0 received all objects
! 2015-12-21 19:25:19.497 - info: admin.0 received all states
! 2015-12-21 19:25:19.543 - info: host.debian-srv Update repository "default" under "conf/sources-dist.json"
! 2015-12-21 19:25:28.392 - info: admin.0 Repository received successfully.
! А тут все работает
До того как прибил все драйвера в логе некоторые стартовали

! 2015-12-21 18:52:24.992 - info: host.debian-srv iobroker.js-controller version 0.8.2 js-controller starting
! 2015-12-21 18:52:24.997 - info: host.debian-srv Copyright © 2014-2015 bluefox, hobbyquaker
! 2015-12-21 18:52:24.998 - info: host.debian-srv hostname: debian-srv
! 2015-12-21 18:52:24.998 - info: host.debian-srv ip addresses:
! 2015-12-21 18:52:25.020 - info: inMem-states listening on port 9000
! 2015-12-21 18:52:25.045 - info: inMem-objects listening on port 9001
! 2015-12-21 18:52:25.049 - info: host.debian-srv InMemoryDB connected
! 2015-12-21 18:52:25.055 - info: host.debian-srv 5 instances found
! 2015-12-21 18:52:25.056 - info: host.debian-srv starting 4 instances
! 2015-12-21 18:52:25.072 - info: host.debian-srv instance system.adapter.admin.0 started with pid 931
! 2015-12-21 18:52:27.954 - info: admin.0 starting. Version 0.7.2 in /opt/iobroker/node_modules/iobroker.admin
! 2015-12-21 18:52:28.032 - info: admin.0 requesting all states
! 2015-12-21 18:52:28.035 - info: admin.0 requesting all objects
! 2015-12-21 18:52:28.037 - info: admin.0 Request actual repository...
! 2015-12-21 18:52:28.040 - info: admin.0 http server listening on port 8081
! 2015-12-21 18:52:28.041 - info: admin.0 Use link "http://localhost:8081" to configure.
! 2015-12-21 18:52:28.331 - info: admin.0 received all states
! 2015-12-21 18:52:28.455 - info: admin.0 received all objects
! 2015-12-21 18:52:28.515 - info: host.debian-srv Update repository "default" under "conf/sources-dist.json"
! 2015-12-21 18:52:29.543 - info: host.debian-srv instance system.adapter.megad.0 started with pid 1017
! 2015-12-21 18:52:30.595 - info: megad.0 starting. Version 1.1.1 in /opt/iobroker/node_modules/iobroker.megad
! 2015-12-21 18:52:30.731 - warn: megad.0 port 80 already in use
! 2015-12-21 18:52:33.618 - info: host.debian-srv instance system.adapter.web.0 started with pid 1023
! 2015-12-21 18:52:34.939 - info: web.0 starting. Version 1.3.3 in /opt/iobroker/node_modules/iobroker.web
! 2015-12-21 18:52:35.740 - info: web.0 socket.io server listening on port 8082
! 2015-12-21 18:52:35.746 - info: web.0 http server listening on port 8082
! 2015-12-21 18:52:36.435 - info: admin.0 Repository received successfully.
! 2015-12-21 18:52:38.036 - info: vis.0 starting. Version 0.7.9 in /opt/iobroker/node_modules/iobroker.vis
! 2015-12-21 18:52:39.321 - info: host.debian-srv instance system.adapter.vis.0 terminated while should be started once
! 2015-12-21 19:15:42.566 - info: host.debian-srv received SIGTERM
! 2015-12-21 19:15:42.568 - info: host.debian-srv stopInstance system.adapter.admin.0
! 2015-12-21 19:15:42.568 - info: host.debian-srv stopInstance system.adapter.admin.0 killing pid 931
! 2015-12-21 19:15:42.568 - info: host.debian-srv stopInstance system.adapter.megad.0
! 2015-12-21 19:15:42.568 - info: host.debian-srv stopInstance system.adapter.megad.0 killing pid 1017
! 2015-12-21 19:15:42.568 - info: host.debian-srv stopInstance system.adapter.web.0
! 2015-12-21 19:15:42.568 - info: host.debian-srv stopInstance system.adapter.web.0 killing pid 1023
! 2015-12-21 19:15:42.569 - info: host.debian-srv stopInstance system.adapter.vis.0
! 2015-12-21 19:15:42.569 - info: host.debian-srv stopInstance system.adapter.javascript.0
! 2015-12-21 19:15:42.569 - warn: host.debian-srv stopInstance system.adapter.javascript.0 not running
! 2015-12-21 19:15:42.572 - info: web.0 terminating http server on port 8082
! 2015-12-21 19:15:42.573 - info: web.0 terminated http server on port 8082
! 2015-12-21 19:15:42.569 - info: admin.0 terminating http server on port 8081
! 2015-12-21 19:15:42.600 - info: web.0 terminating
! 2015-12-21 19:15:42.613 - info: host.debian-srv instance system.adapter.web.0 terminated with code 0 (OK)
! 2015-12-21 19:15:42.626 - info: admin.0 terminating
! 2015-12-21 19:15:42.638 - info: host.debian-srv instance system.adapter.admin.0 terminated with code 0 (OK)
! 2015-12-21 19:15:42.787 - info: host.debian-srv terminated
! 2015-12-21 19:15:43.570 - info: host.debian-srv received SIGTERM
! 2015-12-21 19:15:43.571 - info: host.debian-srv stopInstance system.adapter.admin.0
! 2015-12-21 19:15:43.571 - warn: host.debian-srv stopInstance system.adapter.admin.0 not running
! 2015-12-21 19:15:43.572 - info: host.debian-srv stopInstance system.adapter.megad.0
! 2015-12-21 19:15:43.572 - warn: host.debian-srv stopInstance system.adapter.megad.0 not running
! 2015-12-21 19:15:43.574 - info: host.debian-srv stopInstance system.adapter.web.0
! 2015-12-21 19:15:43.574 - warn: host.debian-srv stopInstance system.adapter.web.0 not running
! 2015-12-21 19:15:43.574 - info: host.debian-srv stopInstance system.adapter.vis.0
! 2015-12-21 19:15:43.575 - info: host.debian-srv stopInstance system.adapter.javascript.0
! 2015-12-21 19:15:43.576 - warn: host.debian-srv stopInstance system.adapter.javascript.0 not running
! 2015-12-21 19:15:43.583 - info: host.debian-srv terminated
2995_meross_log.txt