Adapter: SMA SEMP
-
sollten die Geräte, die über den SEMP-Adapter kommen, in der Geräteliste auftauchen? Bei mir tauchen sie nämlich nur unter der Verbraucherübersicht auf.
-
Okay, danke dir die Rückmeldungen. So kompliziert habe ich mir das nicht vorgestellt.
Ich dachte, ich könnte ein unmanged switch an den lan 4 der fritzbox hängen und zusätzlich alle IoT Devices, die wlan haben über den wlan Gastzugang verbinden. Ich dachte, dann hätte ich alles nach meiner Vorstellung im Gastzugang abgeschottet.
Alternativ hätte ich mir ein managed switch geholt und darüber VLANs eingerichtet. Dann habe ich aber noch kein vlan WiFi.
Gut, ich glaube, ich stelle mir nochmal intensiv die Frage, wie wichtig mir das ist und welchen Aufwand ich dafür betreiben möchte. Denn nach den ersten Antworten kann der iobroker zwar raussenden, aber nichts von außen reinkommen. Also schon relativ safe.
Stellt sich nur die Frage, was mit so tv Geräten, Kameras, Google home etc. ist, die sich zurzeit im Netzwerk befinden. -
Achtung:
Es gibt jetzt die Version 2.0 des Adapters.
Ich habe das admin-Interface komplett überarbeitet. Zusätzlich habe ich das backend komplett auf Typescript umgestellt.
Bitte prüft, ob noch alles so funktioniert, wie bisher. Leider kann ich nicht alle möglichen Szenarien testen.
Mögliche Fehler bitte als Ticket im github oder hier im Forum melden. -
Achtung:
Es gibt jetzt die Version 2.0 des Adapters.
Ich habe das admin-Interface komplett überarbeitet. Zusätzlich habe ich das backend komplett auf Typescript umgestellt.
Bitte prüft, ob noch alles so funktioniert, wie bisher. Leider kann ich nicht alle möglichen Szenarien testen.
Mögliche Fehler bitte als Ticket im github oder hier im Forum melden.Hallo,
ich habe das Update installiert und es erschien im Ennexos nur die Information, dass die Kommunikation gestört wäre.
Fehlermeldungen im IOBroker sind nicht vorhanden.
Nach einem Downgrade auf die Vorgängerversion wird zwar die Kommunikation wieder grün gezeigt und die Echtzeitdaten werden angezeigt. Allerdings werden diese jetzt nicht mehr im Portal hinterlegt.
Zwar scheint die Steuerung wieder zu funktionieren, allerdings brauche ich die hinterlegten Daten für die Berechnung des flexiblen Stromtarifs.
Irgendwie bin ich mit meinem Latein am Ende.
Viele Grüße
Tilo -
Hallo,
ich habe das Update installiert und es erschien im Ennexos nur die Information, dass die Kommunikation gestört wäre.
Fehlermeldungen im IOBroker sind nicht vorhanden.
Nach einem Downgrade auf die Vorgängerversion wird zwar die Kommunikation wieder grün gezeigt und die Echtzeitdaten werden angezeigt. Allerdings werden diese jetzt nicht mehr im Portal hinterlegt.
Zwar scheint die Steuerung wieder zu funktionieren, allerdings brauche ich die hinterlegten Daten für die Berechnung des flexiblen Stromtarifs.
Irgendwie bin ich mit meinem Latein am Ende.
Viele Grüße
TiloIrgendwie bin ich mit meinem Latein am Ende.
Vielleicht hilft das log vom SHM selbst.
Eine Anleitung dazu gibt es hier:
https://github.com/rg-engineering/ioBroker.semp/blob/master/docu/connection_assist/connection_assist_de.mdFehlermeldungen im IOBroker sind nicht vorhanden.
Hast du nach dem upgrade alle Konfigurationen geprüft? Vielleicht auch den Adapter mal auf debug stellen und das ganze hier posten und mir senden? Evtl. sehen wir da etwas...
-
Vielen Dank für die Rückmeldung.
Erster Zwischenstand: die Version 1.5.4 funktioniert erst einmal wieder.
Nach der Neuinstallation war kein Statuserkennungstyp markiert. Deshalb wurden die Daten nicht in das Portal übernommen.
Ich überlege noch, ob ich noch einen neuen Versuch mit der Version 2.0.5 unternehme. Das Wetter ist ja entsprechend... -
Hallo,
ich habe vor 1 Woche auch den SEMP Adapter auf 2.05 aktualisiert.
Fehlermeldungen erhalte ich nicht - ich habe nur eine Warnung:semp.0 2026-04-08 08:29:38.465 warn system.config.common.latitude is not a valid number, using default devicebaseid 12345678
Im EnnexOS oder in der SMA App erscheinen die Geräte mit der Leistung, aber es wird seitdem Update nichts mehr aufgezeichnet (Statistik ist leer inkl Anteil PV / Netzbezug)
-
Hallo,
ich habe vor 1 Woche auch den SEMP Adapter auf 2.05 aktualisiert.
Fehlermeldungen erhalte ich nicht - ich habe nur eine Warnung:semp.0 2026-04-08 08:29:38.465 warn system.config.common.latitude is not a valid number, using default devicebaseid 12345678
Im EnnexOS oder in der SMA App erscheinen die Geräte mit der Leistung, aber es wird seitdem Update nichts mehr aufgezeichnet (Statistik ist leer inkl Anteil PV / Netzbezug)
@matze-pe Hast du nach dem update die Konfiguration nochmal geprüft? Vielleich ist beim update irgend etwas "verloren" gegangen...
Im EnnexOS oder in der SMA App erscheinen die Geräte mit der Leistung, aber es wird seitdem Update nichts mehr aufgezeichnet (Statistik ist leer inkl Anteil PV / Netzbezug)
das hier verstehe ich nicht. Wenn die Leistung an das SunnyPortal übertragen wird, macht doch der Adapter alles richtig? Die Aufzeichnung macht doch das Portal selbst.
Zeig bitte mal per screen shot was du meinst... -
@matze-pe Hast du nach dem update die Konfiguration nochmal geprüft? Vielleich ist beim update irgend etwas "verloren" gegangen...
Im EnnexOS oder in der SMA App erscheinen die Geräte mit der Leistung, aber es wird seitdem Update nichts mehr aufgezeichnet (Statistik ist leer inkl Anteil PV / Netzbezug)
das hier verstehe ich nicht. Wenn die Leistung an das SunnyPortal übertragen wird, macht doch der Adapter alles richtig? Die Aufzeichnung macht doch das Portal selbst.
Zeig bitte mal per screen shot was du meinst...@matze-pe Hast du nach dem update die Konfiguration nochmal geprüft? Vielleich ist beim update irgend etwas "verloren" gegangen...
Im EnnexOS oder in der SMA App erscheinen die Geräte mit der Leistung, aber es wird seitdem Update nichts mehr aufgezeichnet (Statistik ist leer inkl Anteil PV / Netzbezug)
das hier verstehe ich nicht. Wenn die Leistung an das SunnyPortal übertragen wird, macht doch der Adapter alles richtig? Die Aufzeichnung macht doch das Portal selbst.
Zeig bitte mal per screen shot was du meinst...Hi,
die Live Ansicht passt, hier liegen 81W an.
In der Statistik hört genau zu dem Zeitpunkt auf, als ich das Update auf die neue Version gemacht habe.
Die Einstellungen im Adapter passen, da die Live Ansicht weiterhin funktioniert wird der Messkanal auch korrekt übertragen.Ich habe gestern Abend wieder die vorherige Version 1.5 installiert, und von letzter Nacht wird die Statistik wieder gefüllt.
Viele Grüße
Matthias -
Hallo, ich habe letzte Woche meine Lambda Wärmepumpe bekommen und möchte sie in das SMA Sunnyportal mit dem SMA SEMP Adapter einbinden. Ich bin auch so weit gekommen dass ich sie im Sunnyportal habe, aber ich sehe keine Daten. Hab ich alle Geräteeinstellungen richtig eingetragen?.
Bild Link)- List
-
Hallo, ich habe letzte Woche meine Lambda Wärmepumpe bekommen und möchte sie in das SMA Sunnyportal mit dem SMA SEMP Adapter einbinden. Ich bin auch so weit gekommen dass ich sie im Sunnyportal habe, aber ich sehe keine Daten. Hab ich alle Geräteeinstellungen richtig eingetragen?.- List
@bernie2021 Welche Daten erwartest du denn? ich gehe davon aus, dass du die Leistung im SunnyPortal sehen willst. Dann musst du aber auch die OID für Messung unter "Zähler" konfigurieren.
Energieanforderungen kannst du auch nur stellen, wenn du dem SunnyPortal mitteilst, ob deine Wärmepumpe an ist (also heizt) oder nicht. Du hast den Status auf "Immer an", also sagst du dem SunnyPortal ständig, meine WP ist schon an... -
Ich versuche auch gerade per SEMP Adapter die Daten meiner Keba KeContact Wallbox ins Sunnyportal zu bekommen.
Die Wallbox scheint auch im Sunnyportal auf, aber es werden keine Daten übermittelt.
Kannst du mir sagen ob ich bei den Adapter Settings wo einen Fehler habe ?
-
Ich versuche auch gerade per SEMP Adapter die Daten meiner Keba KeContact Wallbox ins Sunnyportal zu bekommen.
Die Wallbox scheint auch im Sunnyportal auf, aber es werden keine Daten übermittelt.
Kannst du mir sagen ob ich bei den Adapter Settings wo einen Fehler habe ?Kannst du mir sagen ob ich bei den Adapter Settings wo einen Fehler habe ?
Kommt darauf an, was du erreichen willst. Wenn du zunächst nur den aktuellen Verbrauch im Portal sehen willst, müssen wir uns nur Status und aktuelle Leistung anschauen. In den meisten Fällen wird der Status (also an oder aus) nicht richtig übertagen. Das sieht man aber schön im debug-log. Ich würde die Tabell ganz unten speziell mit DeviceOIDCounter und DeviceOIDStatus ausfüllen...
Wenn du später die wallbox auch vom Portal gesteuert haben willst, musst du DeviceOIDPlugConnected und DeviceOIDChargePower in der Tabelle ausfüllen.
-
Ich habe nun folgende Felder ausgefüllt:
Leider werden immer noch keine Daten ins Sunnyportal übertragen.
Ich finde aber den Fehler nicht...Kannst du mir sagen wofür DeviceOIDStatus gedacht ist ?
Ich fürchte dafür bekomme ich keinen passenden DP vom Adapter geliefert...Nebeneffekt, seit ich diese Felder befüllt habe:
Der Adapter spammt mir nun alle 15 Sekunden das Log voll:
Hab ich etwas falsch ausgefüllt, oder kann ich das wo im Adapter anpassen, oder lässt sich das nur über die Logstufe regeln ?
-
Ich habe nun folgende Felder ausgefüllt:
Leider werden immer noch keine Daten ins Sunnyportal übertragen.
Ich finde aber den Fehler nicht...Kannst du mir sagen wofür DeviceOIDStatus gedacht ist ?
Ich fürchte dafür bekomme ich keinen passenden DP vom Adapter geliefert...Nebeneffekt, seit ich diese Felder befüllt habe:
Der Adapter spammt mir nun alle 15 Sekunden das Log voll:
Hab ich etwas falsch ausgefüllt, oder kann ich das wo im Adapter anpassen, oder lässt sich das nur über die Logstufe regeln ?
@Qlink schalte doch mal auf den debug-log-Mode und schicke mir das log. Wir sehen dort, was an den SHM geschickt wird. Ich denke, der Status (also an oder aus) wird nicht richtig erkannt.
Das info-log sollte eigentlich nur bei Änderung ausgeloggt werden, das muss ich mir anschauen...
-
@rene_hm wenn ich im Adapter unter Haupteinstellungen "erweiterte Protokollierung" aktiviere, dann ändert sich das Logverhalten relativ wenig.
Hier das Log:
semp.0 2026-06-24 17:51:00.697 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false semp.0 2026-06-24 17:50:56.699 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" kecontact.0 2026-06-24 17:50:46.013 info stop charging semp.0 2026-06-24 17:50:45.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:50:30.690 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true kecontact.0 2026-06-24 17:50:16.006 info (re)start charging with 6500mA semp.0 2026-06-24 17:50:15.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false semp.0 2026-06-24 17:50:00.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false web.1 2026-06-24 17:49:59.993 info <== Disconnect system.user.admin from ::ffff:192.168.6.251 iqontrol.0 semp.0 2026-06-24 17:49:56.459 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" web.1 2026-06-24 17:49:51.709 info ==> Connected system.user.admin from ::ffff:192.168.6.251 kecontact.0 2026-06-24 17:49:46.020 info stop charging semp.0 2026-06-24 17:49:45.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:49:30.687 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:49:00.690 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:48:56.144 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" kecontact.0 2026-06-24 17:48:46.013 info minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: Wed Jun 24 2026 17:47:46 GMT+0200 (Mitteleuropäische Sommerzeit) semp.0 2026-06-24 17:48:45.686 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:48:30.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true javascript.0 2026-06-24 17:48:23.002 info script.js.Beschattung.Sonnenstandsberechnung: Sonne: Azimut: 272° / Sonne: Elevation: 30° / Mond: Azimut: 134° / Mond: Elevation: 12.6° kecontact.0 2026-06-24 17:48:16.017 info minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: Wed Jun 24 2026 17:47:46 GMT+0200 (Mitteleuropäische Sommerzeit) semp.0 2026-06-24 17:48:15.687 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:48:00.688 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:47:55.838 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" kecontact.0 2026-06-24 17:47:46.008 info minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: null semp.0 2026-06-24 17:47:45.685 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:47:30.686 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true javascript.0 2026-06-24 17:47:23.009 info script.js.Beschattung.rolax-schatten-wig-pgm: Beschattung Osten falsch! kecontact.0 2026-06-24 17:47:16.002 info regulate wallbox from 7000 to 6000mA semp.0 2026-06-24 17:47:15.686 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:47:00.685 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:46:55.558 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" kecontact.0 2026-06-24 17:46:46.005 info regulate wallbox from 7500 to 7000mA semp.0 2026-06-24 17:46:45.687 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:46:30.685 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:46:15.717 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected trueWas mir aufgefallen ist:
Unter Objekte sind sämtliche DPs vom Adapter leer:
Ist das normal ?Beste Grüße
-
@rene_hm wenn ich im Adapter unter Haupteinstellungen "erweiterte Protokollierung" aktiviere, dann ändert sich das Logverhalten relativ wenig.
Hier das Log:
semp.0 2026-06-24 17:51:00.697 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false semp.0 2026-06-24 17:50:56.699 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" kecontact.0 2026-06-24 17:50:46.013 info stop charging semp.0 2026-06-24 17:50:45.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:50:30.690 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true kecontact.0 2026-06-24 17:50:16.006 info (re)start charging with 6500mA semp.0 2026-06-24 17:50:15.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false semp.0 2026-06-24 17:50:00.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false web.1 2026-06-24 17:49:59.993 info <== Disconnect system.user.admin from ::ffff:192.168.6.251 iqontrol.0 semp.0 2026-06-24 17:49:56.459 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" web.1 2026-06-24 17:49:51.709 info ==> Connected system.user.admin from ::ffff:192.168.6.251 kecontact.0 2026-06-24 17:49:46.020 info stop charging semp.0 2026-06-24 17:49:45.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:49:30.687 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:49:00.690 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:48:56.144 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" kecontact.0 2026-06-24 17:48:46.013 info minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: Wed Jun 24 2026 17:47:46 GMT+0200 (Mitteleuropäische Sommerzeit) semp.0 2026-06-24 17:48:45.686 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:48:30.689 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true javascript.0 2026-06-24 17:48:23.002 info script.js.Beschattung.Sonnenstandsberechnung: Sonne: Azimut: 272° / Sonne: Elevation: 30° / Mond: Azimut: 134° / Mond: Elevation: 12.6° kecontact.0 2026-06-24 17:48:16.017 info minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: Wed Jun 24 2026 17:47:46 GMT+0200 (Mitteleuropäische Sommerzeit) semp.0 2026-06-24 17:48:15.687 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:48:00.688 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:47:55.838 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" kecontact.0 2026-06-24 17:47:46.008 info minimum grid consumption time of 120sec not reached, continuing charging session. ConsumptionTimestamp: null semp.0 2026-06-24 17:47:45.685 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:47:30.686 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true javascript.0 2026-06-24 17:47:23.009 info script.js.Beschattung.rolax-schatten-wig-pgm: Beschattung Osten falsch! kecontact.0 2026-06-24 17:47:16.002 info regulate wallbox from 7000 to 6000mA semp.0 2026-06-24 17:47:15.686 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:47:00.685 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:46:55.558 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" kecontact.0 2026-06-24 17:46:46.005 info regulate wallbox from 7500 to 7000mA semp.0 2026-06-24 17:46:45.687 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:46:30.685 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-24 17:46:15.717 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected trueWas mir aufgefallen ist:
Unter Objekte sind sämtliche DPs vom Adapter leer:
Ist das normal ?Beste Grüße
erweiterte Protokollierung
Ich meine nicht die "erweiterte Protokollierung" im Adapter sondern das log-level des Adapters. Das bitte auf debug stellen...
Kommen irgendwelche Fehlermeldungen des Adapters, wenn er neu gestartet wird? Alle Datenpunkte sollten eigentlich nicht komplett leer sein... -
Alles klar. Hab ich entsprechend umgestellt.
Nein, es kommen keine Fehlermeldungen des Adapters.
Auch auf debug schaut das log nicht großartig anders aus (für mich):semp.0 2026-06-25 17:45:47.817 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:45:32.818 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:45:17.814 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:45:02.816 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:44:55.655 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" semp.0 2026-06-25 17:44:47.813 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:44:32.810 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true javascript.0 2026-06-25 17:44:23.005 info script.js.Beschattung.Sonnenstandsberechnung: Sonne: Azimut: 272° / Sonne: Elevation: 30.6° / Mond: Azimut: 127° / Mond: Elevation: 3° semp.0 2026-06-25 17:44:17.812 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:44:02.812 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:55.377 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" semp.0 2026-06-25 17:43:47.811 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:32.811 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:19.936 info SempServer: adapter discovered by SHM semp.0 2026-06-25 17:43:17.817 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:16.950 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:16.905 info Keba KeContact P30X: device created F-00000000-000000000001-00 Keba KeContact P30X semp.0 2026-06-25 17:43:16.871 info starting. Version 2.0.12 in /opt/iobroker/node_modules/iobroker.semp, node: v22.21.0, js-controller: 7.2.2 host.iobroker 2026-06-25 17:43:14.067 info instance system.adapter.semp.0 in version "2.0.12" started with pid 21269 host.iobroker 2026-06-25 17:43:10.715 info instance system.adapter.semp.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) semp.0 2026-06-25 17:43:10.558 info terminating semp.0 2026-06-25 17:43:10.558 info terminating admin.0 2026-06-25 17:43:10.281 info <== Disconnect system.user.admin from ::ffff:192.168.30.222 semp semp.0 2026-06-25 17:43:10.063 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason semp.0 2026-06-25 17:43:10.062 debug Plugin sentry destroyed semp.0 2026-06-25 17:43:10.061 info terminating semp.0 2026-06-25 17:43:10.060 debug Gateway: gateway stopped... semp.0 2026-06-25 17:43:10.060 debug Gateway: SSDPServer stopped semp.0 2026-06-25 17:43:10.057 debug SempServer: SEMP server stopped semp.0 2026-06-25 17:43:10.057 debug Gateway: delete all devices semp.0 2026-06-25 17:43:10.056 info Got terminate signal TERMINATE_YOURSELF host.iobroker 2026-06-25 17:43:10.056 info stopInstance system.adapter.semp.0 send kill signal host.iobroker 2026-06-25 17:43:10.052 info stopInstance system.adapter.semp.0 (force=false, process=true) semp.0 2026-06-25 17:43:07.392 debug SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root> semp.0 2026-06-25 17:43:07.391 debug SempServer: SHM requested description semp.0 2026-06-25 17:43:07.357 debug SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root> semp.0 2026-06-25 17:43:07.357 debug SempServer: SHM requested description semp.0 2026-06-25 17:43:07.332 debug SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root> semp.0 2026-06-25 17:43:07.331 debug SempServer: SHM requested description admin.0 2026-06-25 17:43:07.074 info ==> Connected system.user.admin from ::ffff:192.168.30.222 semp.0 2026-06-25 17:43:04.364 info Loglevel changed from "info" to "debug" -
Alles klar. Hab ich entsprechend umgestellt.
Nein, es kommen keine Fehlermeldungen des Adapters.
Auch auf debug schaut das log nicht großartig anders aus (für mich):semp.0 2026-06-25 17:45:47.817 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:45:32.818 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:45:17.814 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:45:02.816 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:44:55.655 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" semp.0 2026-06-25 17:44:47.813 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:44:32.810 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true javascript.0 2026-06-25 17:44:23.005 info script.js.Beschattung.Sonnenstandsberechnung: Sonne: Azimut: 272° / Sonne: Elevation: 30.6° / Mond: Azimut: 127° / Mond: Elevation: 3° semp.0 2026-06-25 17:44:17.812 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:44:02.812 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:55.377 info State value to set for "semp.0.Devices.Keba KeContact P30X.TimeFrames.1.RemainingMaxEnergy" has to be type "number" but received type "string" semp.0 2026-06-25 17:43:47.811 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:32.811 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:19.936 info SempServer: adapter discovered by SHM semp.0 2026-06-25 17:43:17.817 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:16.950 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected true semp.0 2026-06-25 17:43:16.905 info Keba KeContact P30X: device created F-00000000-000000000001-00 Keba KeContact P30X semp.0 2026-06-25 17:43:16.871 info starting. Version 2.0.12 in /opt/iobroker/node_modules/iobroker.semp, node: v22.21.0, js-controller: 7.2.2 host.iobroker 2026-06-25 17:43:14.067 info instance system.adapter.semp.0 in version "2.0.12" started with pid 21269 host.iobroker 2026-06-25 17:43:10.715 info instance system.adapter.semp.0 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) semp.0 2026-06-25 17:43:10.558 info terminating semp.0 2026-06-25 17:43:10.558 info terminating admin.0 2026-06-25 17:43:10.281 info <== Disconnect system.user.admin from ::ffff:192.168.30.222 semp semp.0 2026-06-25 17:43:10.063 info Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason semp.0 2026-06-25 17:43:10.062 debug Plugin sentry destroyed semp.0 2026-06-25 17:43:10.061 info terminating semp.0 2026-06-25 17:43:10.060 debug Gateway: gateway stopped... semp.0 2026-06-25 17:43:10.060 debug Gateway: SSDPServer stopped semp.0 2026-06-25 17:43:10.057 debug SempServer: SEMP server stopped semp.0 2026-06-25 17:43:10.057 debug Gateway: delete all devices semp.0 2026-06-25 17:43:10.056 info Got terminate signal TERMINATE_YOURSELF host.iobroker 2026-06-25 17:43:10.056 info stopInstance system.adapter.semp.0 send kill signal host.iobroker 2026-06-25 17:43:10.052 info stopInstance system.adapter.semp.0 (force=false, process=true) semp.0 2026-06-25 17:43:07.392 debug SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root> semp.0 2026-06-25 17:43:07.391 debug SempServer: SHM requested description semp.0 2026-06-25 17:43:07.357 debug SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root> semp.0 2026-06-25 17:43:07.357 debug SempServer: SHM requested description semp.0 2026-06-25 17:43:07.332 debug SempServer: description xml sent <?xml version="1.0" encoding="utf-8" standalone="yes" ?><root xmlns="urn:schemas-upnp-org:device-1-0"><specVersion><major>1</major><minor>0</minor></specVersion><device><deviceType>urn:schemas-simple-energy-management-protocol:device:Gateway:1</deviceType><friendlyName>ioBroker Gateway</friendlyName><manufacturer>ioBroker</manufacturer><manufacturerURL>www.iobroker.net</manufacturerURL><modelDescription>interface to ioBroker</modelDescription><modelName>Semp_Gateway</modelName><modelNumber>0.1</modelNumber > <modelURL>www.iobroker.net</modelURL><UDN>uuid:F-00000000-000000000001-00</UDN><semp:X_SEMPSERVICE xmlns:semp="urn:schemas-simple-energy-management-protocol:service-1-0"><semp:server>http://192.168.30.90:9765</semp:server><semp:basePath>/semp</semp:basePath><semp:transport>HTTP/Pull</semp:transport><semp:exchangeFormat>XML</semp:exchangeFormat><semp:wsVersion>1.1.5</semp:wsVersion></semp:X_SEMPSERVICE></device></root> semp.0 2026-06-25 17:43:07.331 debug SempServer: SHM requested description admin.0 2026-06-25 17:43:07.074 info ==> Connected system.user.admin from ::ffff:192.168.30.222 semp.0 2026-06-25 17:43:04.364 info Loglevel changed from "info" to "debug"Auch auf debug schaut das log nicht großartig anders aus (für mich):
Der Adapter steht nicht wirklich auf debug. Der ist kurz auf debug, dann startest du den Adapter neu und er steht wieder auf info.
Du kannst auch http://xx.xx.xx.xx:9765/semp mit xx.xx.xx.xx als deine IP des iobroker Gateways (also nicht SHM) im Browser eingeben. Dann zeigt dein Browser an, was der SHM normalerweise als XML bekommen würde ...
-
Alles klar.
Hab nochmal auf debug umgestellt jetzt steht schon mehr im log:semp.0 2026-06-29 21:22:08.246 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:22:08.245 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:22:08.243 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:22:08.243 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:22:08.238 debug Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running semp.0 2026-06-29 21:22:08.238 debug Keba KeContact P30X: status detection time limit is 1 going to off semp.0 2026-06-29 21:22:08.238 debug Keba KeContact P30X: set status detection limit to 500 semp.0 2026-06-29 21:22:08.236 debug Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running semp.0 2026-06-29 21:22:08.236 debug Keba KeContact P30X: status detection time limit is 1 going to off semp.0 2026-06-29 21:22:08.236 debug Keba KeContact P30X: set status detection limit to 500 semp.0 2026-06-29 21:22:08.229 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:22:08.229 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:22:08.214 debug Keba KeContact P30X: set new charge power 0 number semp.0 2026-06-29 21:22:08.213 debug planning request: got energy used 0 semp.0 2026-06-29 21:22:08.213 debug Keba KeContact P30X: calc energy 0 1782760928211 = 0Wh semp.0 2026-06-29 21:22:08.212 debug Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off semp.0 2026-06-29 21:22:08.212 debug planning request: got energy used 0 semp.0 2026-06-29 21:22:08.212 debug Keba KeContact P30X: calc energy 0 1782760913215 = 0Wh semp.0 2026-06-29 21:22:08.211 debug Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off semp.0 2026-06-29 21:22:08.209 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:22:08.209 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:22:08.202 debug Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number semp.0 2026-06-29 21:22:08.202 debug Keba KeContact P30X: new recommendation power 0 number semp.0 2026-06-29 21:22:08.202 debug Keba KeContact P30X: wallbox charging false semp.0 2026-06-29 21:22:08.202 debug Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean semp.0 2026-06-29 21:22:08.201 debug Keba KeContact P30X: no switch configured semp.0 2026-06-29 21:22:08.201 debug Keba KeContact P30X: disconnect - timer fired semp.0 2026-06-29 21:22:08.201 debug planning request: Planningrequest all timeframes canceled semp.0 2026-06-29 21:22:08.201 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false semp.0 2026-06-29 21:22:08.200 debug Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean semp.0 2026-06-29 21:22:08.196 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:22:08.196 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:22:08.193 debug Keba KeContact P30X: wallbox error true semp.0 2026-06-29 21:22:08.193 debug Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number semp.0 2026-06-29 21:21:56.663 debug SempServer: response sent semp.0 2026-06-29 21:21:56.661 debug SempServer: response xml <?xml version="1.0" encoding="utf-8"?> <Device2EM xmlns="http://www.sma.de/communication/schema/SEMP/v1"> <DeviceInfo> <Identification> <DeviceId>F-00000000-000000000001-00</DeviceId> <DeviceName>Keba KeContact P30X</DeviceName> <DeviceType>EVCharger</DeviceType> <DeviceSerial>20296767</DeviceSerial> <DeviceVendor>Keba</DeviceVendor> </Identification> <Characteristics> <MaxPowerConsumption>11000</MaxPowerConsumption> <MinPowerConsumption>6000</MinPowerConsumption> </Characteristics> <Capabilities> <CurrentPower> <Method>Measurement</Method> </CurrentPower> <Timestamps> <AbsoluteTimestamps>false</AbsoluteTimestamps> </Timestamps> <Interruptions> <InterruptionsAllowed>false</InterruptionsAllowed> </Interruptions> <Requests> <OptionalEnergy>true</OptionalEnergy> </Requests> </Capabilities> </DeviceInfo> <DeviceStatus> <DeviceId>F-00000000-000000000001-00</DeviceId> <EMSignalsAccepted>false</EMSignalsAccepted> <Status>Off</Status> <PowerConsumption> <PowerInfo> <AveragePower>0</AveragePower> <Timestamp>0</Timestamp> <AveragingInterval>60</AveragingInterval> </PowerInfo> </PowerConsumption> </DeviceStatus> </Device2EM> semp.0 2026-06-29 21:21:56.658 debug planning request: planningrequest data [] semp.0 2026-06-29 21:21:56.658 debug Keba KeContact P30X: no switch configured semp.0 2026-06-29 21:21:56.658 debug Keba KeContact P30X: turn device off semp.0 2026-06-29 21:21:56.658 debug planning request: Planningrequest Check2Switch {"SwitchOff":true,"restart":false} semp.0 2026-06-29 21:21:56.657 debug Gateway: get all devices semp.0 2026-06-29 21:21:56.656 debug SempServer: SHM requested all devices. /semp/ ::ffff:192.168.30.2 http yamaha.0 2026-06-29 21:21:55.770 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" yamaha.0 2026-06-29 21:21:55.311 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" yamaha.0 2026-06-29 21:21:54.687 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" yamaha.0 2026-06-29 21:21:54.335 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" semp.0 2026-06-29 21:21:53.233 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:53.232 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:53.231 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:53.231 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:53.227 debug Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running semp.0 2026-06-29 21:21:53.226 debug Keba KeContact P30X: status detection time limit is 1 going to off semp.0 2026-06-29 21:21:53.226 debug Keba KeContact P30X: set status detection limit to 500 semp.0 2026-06-29 21:21:53.225 debug Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running semp.0 2026-06-29 21:21:53.225 debug Keba KeContact P30X: status detection time limit is 1 going to off semp.0 2026-06-29 21:21:53.224 debug Keba KeContact P30X: set status detection limit to 500 semp.0 2026-06-29 21:21:53.219 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:53.219 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:53.215 debug planning request: got energy used 0 semp.0 2026-06-29 21:21:53.215 debug Keba KeContact P30X: calc energy 0 1782760913214 = 0Wh semp.0 2026-06-29 21:21:53.215 debug Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off semp.0 2026-06-29 21:21:53.214 debug planning request: got energy used 0 semp.0 2026-06-29 21:21:53.214 debug Keba KeContact P30X: calc energy 0 1782760898217 = 0Wh semp.0 2026-06-29 21:21:53.214 debug Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off semp.0 2026-06-29 21:21:53.211 debug Keba KeContact P30X: set new charge power 0 number semp.0 2026-06-29 21:21:53.210 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:53.210 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State yamaha.0 2026-06-29 21:21:53.207 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" semp.0 2026-06-29 21:21:53.203 debug Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number semp.0 2026-06-29 21:21:53.203 debug Keba KeContact P30X: new recommendation power 0 number semp.0 2026-06-29 21:21:53.203 debug Keba KeContact P30X: wallbox charging false semp.0 2026-06-29 21:21:53.203 debug Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean semp.0 2026-06-29 21:21:53.203 debug Keba KeContact P30X: no switch configured semp.0 2026-06-29 21:21:53.202 debug Keba KeContact P30X: disconnect - timer fired semp.0 2026-06-29 21:21:53.202 debug planning request: Planningrequest all timeframes canceled semp.0 2026-06-29 21:21:53.202 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false semp.0 2026-06-29 21:21:53.202 debug Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean semp.0 2026-06-29 21:21:53.198 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:53.196 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:53.193 debug Keba KeContact P30X: wallbox error true semp.0 2026-06-29 21:21:53.192 debug Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number semp.0 2026-06-29 21:21:52.984 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.966 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.949 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.928 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.879 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.863 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.823 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.808 debug SempServer: SHM requested description yamaha.0 2026-06-29 21:21:52.800 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" semp.0 2026-06-29 21:21:52.793 debug SempServer: SHM requested description yamaha.0 2026-06-29 21:21:52.358 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" semp.0 2026-06-29 21:21:52.169 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.120 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:52.103 debug SempServer: SHM requested description yamaha.0 2026-06-29 21:21:51.986 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" yamaha.0 2026-06-29 21:21:51.650 info State value to set for "yamaha.0.Realtime.MAIN.VOL" has to be type "number" but received type "string" semp.0 2026-06-29 21:21:38.238 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:38.238 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:38.235 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:38.235 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:38.231 debug Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running semp.0 2026-06-29 21:21:38.231 debug Keba KeContact P30X: status detection time limit is 1 going to off semp.0 2026-06-29 21:21:38.230 debug Keba KeContact P30X: set status detection limit to 500 semp.0 2026-06-29 21:21:38.229 debug Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running semp.0 2026-06-29 21:21:38.228 debug Keba KeContact P30X: status detection time limit is 1 going to off semp.0 2026-06-29 21:21:38.228 debug Keba KeContact P30X: set status detection limit to 500 semp.0 2026-06-29 21:21:38.223 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:38.223 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:38.218 debug planning request: got energy used 0 semp.0 2026-06-29 21:21:38.217 debug Keba KeContact P30X: calc energy 0 1782760898215 = 0Wh semp.0 2026-06-29 21:21:38.217 debug Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off semp.0 2026-06-29 21:21:38.217 debug planning request: got energy used 0 semp.0 2026-06-29 21:21:38.215 debug Keba KeContact P30X: calc energy 0 1782760892188 = 0Wh semp.0 2026-06-29 21:21:38.214 debug Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off semp.0 2026-06-29 21:21:38.212 debug Keba KeContact P30X: set new charge power 0 number semp.0 2026-06-29 21:21:38.209 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:38.209 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:38.204 debug Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number semp.0 2026-06-29 21:21:38.203 debug Keba KeContact P30X: new recommendation power 0 number semp.0 2026-06-29 21:21:38.203 debug Keba KeContact P30X: wallbox charging false semp.0 2026-06-29 21:21:38.202 debug Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean semp.0 2026-06-29 21:21:38.202 debug Keba KeContact P30X: no switch configured semp.0 2026-06-29 21:21:38.201 debug Keba KeContact P30X: disconnect - timer fired semp.0 2026-06-29 21:21:38.201 debug planning request: Planningrequest all timeframes canceled semp.0 2026-06-29 21:21:38.201 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false semp.0 2026-06-29 21:21:38.200 debug Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean semp.0 2026-06-29 21:21:38.198 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:38.197 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:38.194 debug Keba KeContact P30X: wallbox error true semp.0 2026-06-29 21:21:38.193 debug Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number semp.0 2026-06-29 21:21:35.197 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:35.181 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:35.126 info SempServer: adapter discovered by SHM semp.0 2026-06-29 21:21:35.126 debug SempServer: SHM requested description semp.0 2026-06-29 21:21:32.204 debug result [{"ID":"F-00000000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false,"WallboxOID":{"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"}},"OptionalEnergy":true}] semp.0 2026-06-29 21:21:32.203 debug device {"ID":"F-00000000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false,"WallboxOID":{"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":0,"Path2Check":"nicht genutzt"}},"OptionalEnergy":true} semp.0 2026-06-29 21:21:32.203 debug UpdateData semp.0 2026-06-29 21:21:32.203 debug Gateway: set device semp.0 2026-06-29 21:21:32.203 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:32.202 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:32.200 debug planning request: planningrequest set minEnergy 0 semp.0 2026-06-29 21:21:32.195 debug Keba KeContact P30X: subscribe Devices.Keba KeContact P30X.MaxEnergy semp.0 2026-06-29 21:21:32.193 debug Keba KeContact P30X: subscribe Devices.Keba KeContact P30X.MinEnergy semp.0 2026-06-29 21:21:32.193 debug Keba KeContact P30X: already off, no timer start Off StatusDetectionOffTimerID not running semp.0 2026-06-29 21:21:32.192 debug Keba KeContact P30X: status detection time limit is 1 going to off semp.0 2026-06-29 21:21:32.192 debug Keba KeContact P30X: set status detection limit to 500 semp.0 2026-06-29 21:21:32.189 debug planning request: got energy used 0 semp.0 2026-06-29 21:21:32.188 debug Keba KeContact P30X: setLastPower 0 number FromPowerValue W Off semp.0 2026-06-29 21:21:32.185 debug Keba KeContact P30X: subscribe OID_Counter 0_userdata.0.Stromversorgung.Wallbox-PowerW semp.0 2026-06-29 21:21:32.185 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:32.184 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:32.182 debug Keba KeContact P30X: wallbox error true semp.0 2026-06-29 21:21:32.182 debug Keba KeContact P30X: DeviceOIDIsError sensor type Number setValue 0 value 0 string number semp.0 2026-06-29 21:21:32.179 debug Keba KeContact P30X: subscribe OID_IsError kecontact.0.error1 semp.0 2026-06-29 21:21:32.179 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:32.179 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:32.177 debug Keba KeContact P30X: wallbox charging false semp.0 2026-06-29 21:21:32.176 debug Keba KeContact P30X: DeviceOIDIsCharging sensor type Boolean setValue true value false string boolean semp.0 2026-06-29 21:21:32.174 debug Keba KeContact P30X: subscribe OID_IsCharging 0_userdata.0.Stromversorgung.Wallbox-Plug semp.0 2026-06-29 21:21:32.174 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:32.173 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:32.171 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:32.171 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:32.166 debug Keba KeContact P30X: in SetState, no new state to set, is plug not connected semp.0 2026-06-29 21:21:32.165 debug Keba KeContact P30X: in SetState got {"val":"plug not connected","ack":true,"ts":1782738442633,"q":0,"from":"system.adapter.semp.0","user":"system.user.admin","lc":1782738442633} from Devices.Keba KeContact P30X.State semp.0 2026-06-29 21:21:32.164 debug Keba KeContact P30X: set new charge power 0 number semp.0 2026-06-29 21:21:32.158 debug Keba KeContact P30X: DeviceOIDChargePower actor type Number setValue 0 number semp.0 2026-06-29 21:21:32.158 debug Keba KeContact P30X: new recommendation power 0 number semp.0 2026-06-29 21:21:32.157 debug Keba KeContact P30X: no switch configured semp.0 2026-06-29 21:21:32.157 debug Keba KeContact P30X: disconnect - timer fired semp.0 2026-06-29 21:21:32.157 debug planning request: Planningrequest all timeframes canceled semp.0 2026-06-29 21:21:32.156 info Keba KeContact P30X: Keba KeContact P30X wallbox plug connected false semp.0 2026-06-29 21:21:32.156 debug Keba KeContact P30X: DeviceOIDPlugConnected sensor type Boolean setValue true value false string boolean semp.0 2026-06-29 21:21:32.151 debug Keba KeContact P30X: subscribe OID_PlugConnected 0_userdata.0.Stromversorgung.Wallbox-Plug semp.0 2026-06-29 21:21:32.106 info Keba KeContact P30X: device created F-00000000-000000000001-00 Keba KeContact P30X semp.0 2026-06-29 21:21:32.105 debug Keba KeContact P30X: wallbox OID configuration (2) {"DeviceOIDPlugConnected":{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsCharging":{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},"DeviceOIDIsError":{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDCounter":{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},"DeviceOIDChargePower":{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"}} semp.0 2026-06-29 21:21:32.105 debug Keba KeContact P30X: wallbox OID configuration (1) [{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}] [{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}] semp.0 2026-06-29 21:21:32.105 debug Keba KeContact P30X: can use optional energy: true semp.0 2026-06-29 21:21:32.105 debug Keba KeContact P30X: BaseId 00000000 length 8 semp.0 2026-06-29 21:21:32.104 debug Keba KeContact P30X: check DeviceID F-00000000-000000000001-00 type string semp.0 2026-06-29 21:21:32.104 debug planning request: planningrequest constructor {"DeviceName":"Keba KeContact P30X","DeviceType":"EVCharger","MaxEnergy":82000,"MinEnergy":8200,"MinPower":6000,"MaxPower":11000,"WallboxChargeTime":"3","DishwasherMode":false,"Type":"EVCharger","Name":"Keba KeContact P30X"} semp.0 2026-06-29 21:21:32.104 debug planning request: instance created semp.0 2026-06-29 21:21:32.103 debug Keba KeContact P30X: instance created semp.0 2026-06-29 21:21:32.102 debug Gateway: add device F-00000000-000000000001-00 semp.0 2026-06-29 21:21:32.102 debug add device {"ID":"F-00000000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false} semp.0 2026-06-29 21:21:32.101 debug Started all! semp.0 2026-06-29 21:21:32.101 debug Gateway: gateway started... semp.0 2026-06-29 21:21:32.100 debug Gateway: SSDPServer started semp.0 2026-06-29 21:21:32.086 debug SempServer: SEMP server listening on 9765 semp.0 2026-06-29 21:21:32.083 debug Gateway: gateway created... semp.0 2026-06-29 21:21:32.083 debug SempServer: SEMPServer created semp.0 2026-06-29 21:21:32.076 debug SempServer: instance created semp.0 2026-06-29 21:21:32.076 debug Gateway: SSDPServer created: http://192.168.30.90:9765/description.xml F-00000000-000000000001-00 semp.0 2026-06-29 21:21:32.075 debug SSDPServer: instance created semp.0 2026-06-29 21:21:32.075 debug Gateway: instance created semp.0 2026-06-29 21:21:32.075 debug BaseID: valid 8-digit number semp.0 2026-06-29 21:21:32.074 debug check BaseID 30380000 type string semp.0 2026-06-29 21:21:32.074 debug check BaseID 30380000 type string semp.0 2026-06-29 21:21:32.074 debug {"IPAddress":"192.168.30.90","UUID":"F-00000000-000000000001-00","SempPort":9765,"SempName":"ioBroker Gateway","SempManufacturer":"ioBroker","DeviceBaseID":"30380000","extendedLog":false,"LogToCSV":false,"LogToCSVPath":"/home/pi/semp.csv","devices":[{"ID":"F-00000000-000000000001-00","Name":"Keba KeContact P30X","IsActive":true,"Type":"EVCharger","MeasurementMethod":"Measurement","StatusDetectionType":"FromPowerValue","MeasurementUnit":"W","wallbox_oid_read":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDPlugConnected","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsCharging","OID":"0_userdata.0.Stromversorgung.Wallbox-Plug","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDIsError","OID":"kecontact.0.error1","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":true,"must":"optional","Name":"DeviceOIDCounter","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"0","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStatus","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"wallbox_oid_write":[{"active":true,"must":"obligatorisch","Name":"DeviceOIDChargePower","OID":"0_userdata.0.Stromversorgung.Wallbox-PowerW","Type":"Number","SetValue":"","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStartCharge","OID":"kecontact.0.start","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDStopCharge","OID":"kecontact.0.stop","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeEnable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOID3PhaseChargeDisable","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"},{"active":false,"must":"optional","Name":"DeviceOIDSwitch","OID":"","Type":"Boolean","SetValue":"true","Path2Check":"nicht genutzt"}],"Vendor":"Keba","SerialNr":"20296767","MinPower":6000,"MaxPower":11000,"InterruptionsAllowed":false,"OID_Power":"0_userdata.0.Stromversorgung.Wallbox-PowerW","StatusDetectionLimit":500,"StatusDetectionLimitTimeOn":1,"StatusDetectionLimitTimeOff":1,"StatusDetectionMinRunTime":1,"WallboxPhases":"2","TimerActive":false,"BatteryCapacity":82000,"WallboxChargeTime":"3","WallboxNeedCurrentRecommendation":false,"HasOIDSwitch":false}],"deviceSelector":"F-00000000-000000000001-00"} semp.0 2026-06-29 21:21:32.063 info starting. Version 2.0.12 in /opt/iobroker/node_modules/iobroker.semp, node: v22.21.0, js-controller: 7.2.2 semp.0 2026-06-29 21:21:30.701 debug Plugin sentry Initialize Plugin (enabled=true) semp.0 2026-06-29 21:21:30.662 debug States connected to redis: redis:6379 semp.0 2026-06-29 21:21:30.656 debug States create User PubSub Client semp.0 2026-06-29 21:21:30.655 debug States create System PubSub Client semp.0 2026-06-29 21:21:30.643 debug Redis States: Use Redis connection: redis:6379 semp.0 2026-06-29 21:21:30.633 debug Objects connected to redis: 172.18.0.5:6379 semp.0 2026-06-29 21:21:30.629 debug Objects client initialize lua scripts semp.0 2026-06-29 21:21:30.460 debug Objects create User PubSub Client semp.0 2026-06-29 21:21:30.459 debug Objects create System PubSub Client semp.0 2026-06-29 21:21:30.457 debug Objects client ready ... initialize now semp.0 2026-06-29 21:21:30.440 debug Redis Objects: Use Redis connection: 172.18.0.5:6379und hier noch der output von der URL:
F-00000000-000000000001-00 Keba KeContact P30X EVCharger 20296767 Keba 11000 6000 Measurement false false true F-00000000-000000000001-00 false Off 0 0 60
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden330
Online33.0k
Benutzer83.4k
Themen1.3m
Beiträge