Einschätzung zu Systemstand
-
Ist das auch noch normal?`
host.RasPiIobroker 2026-05-10 21:53:45.470 error Cannot download and install adapter "rpi2@2.4.0". To retry it disable/enable the adapter or restart host. Also check the error messages in the log! host.RasPiIobroker 2026-05-10 21:53:43.429 error iobroker npm-install: host.RasPiIobroker Cannot install iobroker.rpi2@2.4.0: 1 host.RasPiIobroker 2026-05-10 21:53:43.428 error iobroker npm-install: npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.75+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.22.2npm error gyp ERR! node-gyp -v v11.5.0npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-05-10T19_53_23_585Z-debug-0.log host.RasPiIobroker 2026-05-10 21:53:17.435 error iobroker npm-install: host.RasPiIobroker Cannot install iobroker.rpi2@2.4.0: 1 host.RasPiIobroker 2026-05-10 21:53:17.433 error iobroker npm-install: npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.75+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.22.2npm error gyp ERR! node-gyp -v v11.5.0npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-05-10T19_52_54_932Z-debug-0.log host.RasPiIobroker 2026-05-10 21:52:49.002 error iobroker npm-install: host.RasPiIobroker Cannot install iobroker.rpi2@3.0.2: 1 host.RasPiIobroker 2026-05-10 21:52:49.001 error iobroker npm-install: npm error code 1npm error path /opt/iobroker/node_modules/iobroker.rpi2npm error command failednpm error command sh -c bash ./preinstall-check.shnpm error Checking package: libgpiod-dev >= 2.2npm error libgpiod-dev is not installednpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-05-10T19_52_36_693Z-debug-0.log host.RasPiIobroker 2026-05-10 21:38:44.002 error iobroker npm-install: host.RasPiIobroker Unknown packet name info. Please install packages from outside the repository using "iobroker url <url-or-package>"!adapter "info" cannot be installed: Unknown packet name info. Please install packages from outside the repository using "iobroker url <url-or-package>"!kein Support per PN! - Fragen im Forum stellen -
Benutzt das Voting rechts unten im Beitrag wenn er euch geholfen hat.
Das Forum freut sich über eine Spende. Benutzt dazu den Spendenbutton oben rechts. Danke!
der Installationsfixer: curl -fsL https://iobroker.net/fix.sh | bash - -
-
Ist drauf, rpi2 Version 3.0.2
Hab eben noch weil im Host angezeigt wurde JS von 7.0 auf 7.1 update angeklickt.
Nach einer Weile erschein die Startseite zum Anmelden und nun hab ich ein I mit Kreis drum wo einer im Kreis die Farbe dreht.
Nach einer Weile öffnete die Adminpage. Ist das I mit dem drehenden Balken ein Ladebildschirm oder was macht das System in dem Augenblick?
-
Ist drauf, rpi2 Version 3.0.2
Hab eben noch weil im Host angezeigt wurde JS von 7.0 auf 7.1 update angeklickt.
Nach einer Weile erschein die Startseite zum Anmelden und nun hab ich ein I mit Kreis drum wo einer im Kreis die Farbe dreht.
Nach einer Weile öffnete die Adminpage. Ist das I mit dem drehenden Balken ein Ladebildschirm oder was macht das System in dem Augenblick?
-
========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: RasPiIobroker Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 22:58:19 up 23 min, 1 user, load average: 0.39, 1.20, 1.76 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sun 2026-05-10 22:58:20 CEST Universal time: Sun 2026-05-10 20:58:20 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iob HOME=/home/iob GROUPS=iob adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/iob GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 4.7G 2.0G 12M 1.6G 3.5G Swap: 2.1G 0B 2.1G Total: 10G 4.7G 4.2G Active iob-Instances: 42 7819 M total memory 4492 M used memory 4371 M active memory 971 M inactive memory 1929 M free memory 195 M buffer memory 1320 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 22:58:20 up 23 min, 1 user, load average: 0.39, 1.20, 1.76 Tasks: 235 total, 1 running, 234 sleeping, 0 stopped, 0 zombie %Cpu(s): 10.2 us, 2.0 sy, 0.0 ni, 85.7 id, 2.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7819.7 total, 1927.7 free, 4494.2 used, 1516.9 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 3325.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 1.6G 9.1M 1.6G 1% /run /dev/sda2 ext4 110G 18G 88G 17% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 3.9G 2.6M 3.9G 1% /tmp /dev/sda1 vfat 505M 65M 440M 13% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyS0.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 782M 8.0K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun May 10 22:35:14 2026] EXT4-fs (sda2): orphan cleanup on readonly fs [Sun May 10 22:35:14 2026] EXT4-fs (sda2): mounted filesystem e634e0a4-a958-46cb-abad-862d2102573f ro with ordered data mode. Quota mode: none. [Sun May 10 22:35:17 2026] EXT4-fs (sda2): re-mounted e634e0a4-a958-46cb-abad-862d2102573f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 231M /var/cache 226M /var/cache/apt 179M /var/lib 147M /var/lib/apt Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 576M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 852M /opt/iobroker/iobroker-data/ 791M /opt/iobroker/iobroker-data/files 156M /opt/iobroker/iobroker-data/files/vis 148M /opt/iobroker/iobroker-data/files/vis/widgets 114M /opt/iobroker/iobroker-data/files/vis-2 The five largest files in iobroker-data are: 37M /opt/iobroker/iobroker-data/objects.jsonl 37M /opt/iobroker/iobroker-data/files/radar-trap.admin/build/index.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/states.jsonl 22M /opt/iobroker/iobroker-data/files/residents.admin/build/index.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0 *** ZigBee Settings *** ✓ Your zigbee.1 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: RasPiIobroker RasPiIobroker (version: 7.1.2, hostname: RasPiIobroker , alive, uptime: 954) Core adapters versions js-controller: 7.1.2 admin: 7.8.24 javascript: 9.2.2 nodejs modules from github: 1 +-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#b9a3db457ac1a6e1ef4b7ab6edcfddc0388e4b19) Adapter State + system.adapter.admin.0 : admin : RasPiIobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : RasPiIobroker - disabled + system.adapter.backitup.0 : backitup : RasPiIobroker - enabled + system.adapter.cloud.0 : cloud : RasPiIobroker - enabled + system.adapter.devices.0 : devices : RasPiIobroker - enabled + system.adapter.discovery.0 : discovery : RasPiIobroker - enabled system.adapter.dwd.0 : dwd : RasPiIobroker - enabled + system.adapter.echarts.0 : echarts : RasPiIobroker - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: RasPiIobroker - enabled + system.adapter.epson_ecotank_et_2750.0 : epson_ecotank_et_2750 : RasPiIobroker - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : RasPiIobroker - disabled system.adapter.feiertage.0 : feiertage : RasPiIobroker - disabled system.adapter.flot.0 : flot : RasPiIobroker - disabled + system.adapter.history.0 : history : RasPiIobroker - enabled + system.adapter.hm-rega.0 : hm-rega : RasPiIobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : RasPiIobroker - enabled, port: 0 system.adapter.hm-rpc.3 : hm-rpc : RasPiIobroker - disabled, port: 0 system.adapter.homekit-controller.0 : homekit-controller : RasPiIobroker - disabled system.adapter.ical.0 : ical : RasPiIobroker - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: RasPiIobroker - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : RasPiIobroker - disabled system.adapter.icons-material-png.0 : icons-material-png : RasPiIobroker - disabled system.adapter.icons-material-svg.0 : icons-material-svg : RasPiIobroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : RasPiIobroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : RasPiIobroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: RasPiIobroker - disabled system.adapter.icons-smarthome.0 : icons-smarthome : RasPiIobroker - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : RasPiIobroker - disabled system.adapter.influxdb.0 : influxdb : RasPiIobroker - disabled, port: 8086 system.adapter.info.0 : info : RasPiIobroker - disabled + system.adapter.javascript.0 : javascript : RasPiIobroker - enabled + system.adapter.melcloud.0 : melcloud : RasPiIobroker - enabled + system.adapter.nina.0 : nina : RasPiIobroker - enabled system.adapter.onvif.0 : onvif : RasPiIobroker - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000 system.adapter.onvif.1 : onvif : RasPiIobroker - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000 system.adapter.onvif.2 : onvif : RasPiIobroker - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000 system.adapter.radar-trap.0 : radar-trap : RasPiIobroker - disabled + system.adapter.reolink.0 : reolink : RasPiIobroker - enabled + system.adapter.reolink.1 : reolink : RasPiIobroker - enabled system.adapter.residents.0 : residents : RasPiIobroker - disabled system.adapter.roborock.1 : roborock : RasPiIobroker - disabled + system.adapter.rpi2.0 : rpi2 : RasPiIobroker - enabled + system.adapter.shelly.0 : shelly : RasPiIobroker - enabled, port: 1882, bind: 0.0.0.0 system.adapter.smartcontrol.0 : smartcontrol : RasPiIobroker - disabled system.adapter.smartthings.0 : smartthings : RasPiIobroker - disabled + system.adapter.socketio.0 : socketio : RasPiIobroker - enabled, port: 8086, bind: 192.168.178.144, run as: admin + system.adapter.socketio.1 : socketio : RasPiIobroker - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.solarmanpv.0 : solarmanpv : RasPiIobroker - disabled + system.adapter.sourceanalytix.0 : sourceanalytix : RasPiIobroker - enabled + system.adapter.sourceanalytix.1 : sourceanalytix : RasPiIobroker - enabled system.adapter.sprinklecontrol.0 : sprinklecontrol : RasPiIobroker - disabled + system.adapter.tankerkoenig.0 : tankerkoenig : RasPiIobroker - enabled + system.adapter.telegram.0 : telegram : RasPiIobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tr-064.0 : tr-064 : RasPiIobroker - disabled + system.adapter.tuya.0 : tuya : RasPiIobroker - enabled + system.adapter.unifi-protect.0 : unifi-protect : RasPiIobroker - enabled + system.adapter.unifi-protect.1 : unifi-protect : RasPiIobroker - enabled + system.adapter.unifi.0 : unifi : RasPiIobroker - enabled + system.adapter.virtualpowermeter.0 : virtualpowermeter : RasPiIobroker - enabled system.adapter.vis-2-widgets-radar-trap.0: vis-2-widgets-radar-trap: RasPiIobroker - disabled + system.adapter.vis-2.0 : vis-2 : RasPiIobroker - enabled system.adapter.vis-bars.0 : vis-bars : RasPiIobroker - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : RasPiIobroker - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : RasPiIobroker - disabled system.adapter.vis-history.0 : vis-history : RasPiIobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : RasPiIobroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : RasPiIobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : RasPiIobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : RasPiIobroker - disabled system.adapter.vis-justgage.0 : vis-justgage : RasPiIobroker - disabled system.adapter.vis-map.0 : vis-map : RasPiIobroker - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : RasPiIobroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : RasPiIobroker - disabled system.adapter.vis-metro.0 : vis-metro : RasPiIobroker - disabled system.adapter.vis-plumb.0 : vis-plumb : RasPiIobroker - disabled system.adapter.vis-rgraph.0 : vis-rgraph : RasPiIobroker - disabled system.adapter.vis.0 : vis : RasPiIobroker - enabled + system.adapter.vw-connect.0 : vw-connect : RasPiIobroker - enabled + system.adapter.web.0 : web : RasPiIobroker - enabled, port: 8082, bind: 192.168.178.144, run as: admin + system.adapter.web.1 : web : RasPiIobroker - enabled, port: 8083, bind: 192.168.178.144, run as: admin system.adapter.web.2 : web : RasPiIobroker - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : RasPiIobroker - enabled + system.adapter.worx.0 : worx : RasPiIobroker - enabled + system.adapter.ws.0 : ws : RasPiIobroker - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : RasPiIobroker - enabled + system.adapter.zigbee.1 : zigbee : RasPiIobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : RasPiIobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : RasPiIobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.shelly.0 : shelly : RasPiIobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.socketio.0 : socketio : RasPiIobroker - enabled, port: 8086, bind: 192.168.178.144, run as: admin + system.adapter.socketio.1 : socketio : RasPiIobroker - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : RasPiIobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : RasPiIobroker - enabled, port: 8082, bind: 192.168.178.144, run as: admin + system.adapter.web.1 : web : RasPiIobroker - enabled, port: 8083, bind: 192.168.178.144, run as: admin + system.adapter.ws.0 : ws : RasPiIobroker - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.1 : zigbee : RasPiIobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.8.24 , installed 7.8.24 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "backitup" : 3.3.17 , installed 3.3.17 Adapter "cloud" : 6.0.1 , installed 6.0.1 Adapter "devices" : 2.0.5 , installed 2.0.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "energiefluss-erweitert": 0.8.2, installed 0.8.2 Adapter "epson_ecotank_et_2750": 1.1.0, installed 1.1.0 Adapter "fb-checkpresence": 1.4.2 , installed 1.4.2 Adapter "feiertage" : 1.4.0 , installed 1.4.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 3.0.2 , installed 3.0.2 Adapter "homekit-controller": 0.5.11, installed 0.5.11 Adapter "ical" : 1.20.1 , installed 1.20.1 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-smarthome": 1.0.0 , installed 1.0.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 9.2.2 , installed 9.2.2 Controller "js-controller": 7.1.2 , installed 7.1.2 Adapter "melcloud" : 3.0.4 , installed 3.0.4 Adapter "nina" : 0.0.26 , installed 0.0.26 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "radar-trap" : 2.2.2 , installed 2.2.2 Adapter "reolink" : 1.4.2 , installed 1.4.2 Adapter "residents" : 1.1.1 , installed 1.1.1 Adapter "roborock" : 0.7.0 , installed 0.7.0 Adapter "rpi2" : 3.0.2 , installed 3.0.2 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "smartthings" : 0.3.0 , installed 0.3.0 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "solarmanpv" : 0.7.3 , installed 0.7.3 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "sprinklecontrol": 1.0.5 , installed 1.0.5 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "unifi-protect": 1.0.1 , installed 1.0.1 Adapter "virtualpowermeter": 1.5.0, installed 1.5.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.19 , installed 2.13.19 Adapter "vis-2-widgets-radar-trap": 2.3.3, installed 2.3.3 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.1.0 , installed 2.1.0 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.6.1 , installed 1.6.1 Adapter "vis-icontwo" : 2.11.3 , installed 2.11.3 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.3 , installed 1.1.3 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vw-connect" : 0.8.3 , installed 0.8.1 [Updatable] Adapter "web" : 8.1.0 , installed 8.1.0 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "worx" : 3.3.0 , installed 3.3.0 Adapter "ws" : 4.1.0 , installed 4.1.0 Adapter "yahka" : 1.1.6 , installed 1.1.6 Adapter "zigbee" : 3.4.3 , installed 3.4.3 Adapter "zigbee2mqtt" : 3.2.1 , installed 3.2.1 Objects and States Please stand by - This may take a while Objects: 36090 States: 30856 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://archive.raspberrypi.com/debian trixie InRelease Hit:4 http://deb.debian.org/debian-security trixie-security InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.144:8082 0.0.0.0:* LISTEN 1001 19985 3704/io.web.0 tcp 0 0 192.168.178.144:8083 0.0.0.0:* LISTEN 1001 22167 3721/io.web.1 tcp 0 0 192.168.178.144:8086 0.0.0.0:* LISTEN 1001 21039 3512/io.socketio.0 tcp 0 0 0.0.0.0:43923 0.0.0.0:* LISTEN 1001 18821 3214/io.yahka.0 tcp 0 0 192.168.178.144:2001 0.0.0.0:* LISTEN 1001 17988 3021/io.hm-rpc.0 tcp 0 0 192.168.178.144:2010 0.0.0.0:* LISTEN 1001 18088 3068/io.hm-rpc.2 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16901 2851/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 15249 2851/iobroker.js-co tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 265 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 9325 860/sshd: /usr/sbin tcp 0 0 192.168.178.144:8701 0.0.0.0:* LISTEN 1001 16223 3034/io.hm-rpc.1 tcp6 0 0 :::8085 :::* LISTEN 1001 22531 3737/io.ws.0 tcp6 0 0 :::8084 :::* LISTEN 1001 19879 3524/io.socketio.1 tcp6 0 0 :::8081 :::* LISTEN 1001 17822 2879/io.admin.0 tcp6 0 0 :::111 :::* LISTEN 0 1206 1/init tcp6 0 0 :::22 :::* LISTEN 0 9335 860/sshd: /usr/sbin udp 0 0 0.0.0.0:111 0.0.0.0:* 0 5511 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 1911 645/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 18874 3117/io.shelly.0 udp 0 0 0.0.0.0:39001 0.0.0.0:* 101 1913 645/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 19043 3125/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 19044 3125/io.tuya.0 udp6 0 0 :::111 :::* 0 5512 1/init udp6 0 0 fe80::3474:42d7:a07:546 :::* 0 8348 699/NetworkManager udp6 0 0 :::5353 :::* 101 1912 645/avahi-daemon: r udp6 0 0 :::59000 :::* 101 1914 645/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-05-10 22:55:28.844 - info: dwd.0 (4317) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2026-05-10 22:55:29.393 - info: host.RasPiIobroker instance system.adapter.dwd.0 having pid 4317 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2026-05-10 22:55:48.086 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:55:48.310 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:55:50.902 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Connect locally to device 2026-05-10 22:55:50.902 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg Init with IP=192.168.178.194, Key=d5R&$cSpUI/[yvX#, Version=3.3 2026-05-10 22:55:53.974 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:56:17.046 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:56:51.382 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:56:54.156 - info: tuya.0 (3125) bfacf54b96372f497255jg: Connect locally to device 2026-05-10 22:56:54.156 - info: tuya.0 (3125) bfacf54b96372f497255jg Init with IP=192.168.178.53, Key=gd/V|.sWrld+{7Bp, Version=3.3 2026-05-10 22:56:57.239 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:57:00.118 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:57:20.310 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:58:03.190 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:58:03.382 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:58:05.959 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Connect locally to device 2026-05-10 22:58:05.960 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg Init with IP=192.168.178.194, Key=d5R&$cSpUI/[yvX#, Version=3.3 2026-05-10 22:58:09.014 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:58:32.086 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:59:06.463 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:59:10.969 - info: tuya.0 (3125) bfacf54b96372f497255jg: Connect locally to device 2026-05-10 22:59:10.974 - info: tuya.0 (3125) bfacf54b96372f497255jg Init with IP=192.168.178.53, Key=gd/V|.sWrld+{7Bp, Version=3.3 2026-05-10 22:59:14.038 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:59:15.163 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.194:6668============ Mark until here for C&P =============
iob diag has finished.
-
========== Start marking the full check here =========== ```bash Script v.2026-01-31 *** BASE SYSTEM *** Operating System: Debian GNU/Linux 13 (trixie) Static hostname: RasPiIobroker Icon name: computer Kernel: Linux 6.12.75+rpt-rpi-v8 Architecture: arm64 OS is similar to: Model : Raspberry Pi 4 Model B Rev 1.5 Docker : false Virtualization : none Kernel : aarch64 Userland : 64 bit Systemuptime and Load: 22:58:19 up 23 min, 1 user, load average: 0.39, 1.20, 1.76 CPU threads: 4 *** LIFE CYCLE STATUS *** Operating System is the current Debian stable version codenamed 'trixie'! *** RASPBERRY THROTTLING *** Current issues: No throttling issues detected. Previously detected issues: No throttling issues detected. *** TIME AND TIMEZONES *** Local time: Sun 2026-05-10 22:58:20 CEST Universal time: Sun 2026-05-10 20:58:20 UTC RTC time: n/a Time zone: Europe/Berlin (CEST, +0200) System clock synchronized: yes NTP service: active RTC in local TZ: no *** Users and Groups *** User that called 'iob diag': iob HOME=/home/iob GROUPS=iob adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker User that is running 'js-controller': iobroker HOME=/home/iobroker SUDO_HOME=/home/iob GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c *** DISPLAY-SERVER SETUP *** Display-Server: false Unit display-manager.service could not be found. Display-Manager: Desktop: Session: tty *** MEMORY *** total used free shared buff/cache available Mem: 8.2G 4.7G 2.0G 12M 1.6G 3.5G Swap: 2.1G 0B 2.1G Total: 10G 4.7G 4.2G Active iob-Instances: 42 7819 M total memory 4492 M used memory 4371 M active memory 971 M inactive memory 1929 M free memory 195 M buffer memory 1320 M swap cache 2047 M total swap 0 M used swap 2047 M free swap *** top - Table Of Processes *** top - 22:58:20 up 23 min, 1 user, load average: 0.39, 1.20, 1.76 Tasks: 235 total, 1 running, 234 sleeping, 0 stopped, 0 zombie %Cpu(s): 10.2 us, 2.0 sy, 0.0 ni, 85.7 id, 2.0 wa, 0.0 hi, 0.0 si, 0.0 st MiB Mem : 7819.7 total, 1927.7 free, 4494.2 used, 1516.9 buff/cache MiB Swap: 2048.0 total, 2048.0 free, 0.0 used. 3325.5 avail Mem *** FAILED SERVICES *** UNIT LOAD ACTIVE SUB DESCRIPTION 0 loaded units listed. *** DMESG CRITICAL ERRORS *** No critical errors detected *** FILESYSTEM *** Filesystem Type Size Used Avail Use% Mounted on udev devtmpfs 3.6G 0 3.6G 0% /dev tmpfs tmpfs 1.6G 9.1M 1.6G 1% /run /dev/sda2 ext4 110G 18G 88G 17% / tmpfs tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs tmpfs 5.0M 16K 5.0M 1% /run/lock tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/systemd-journald.service tmpfs tmpfs 3.9G 2.6M 3.9G 1% /tmp /dev/sda1 vfat 505M 65M 440M 13% /boot/firmware tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/serial-getty@ttyS0.service tmpfs tmpfs 1.0M 0 1.0M 0% /run/credentials/getty@tty1.service tmpfs tmpfs 782M 8.0K 782M 1% /run/user/1000 Messages concerning ext4 filesystem in dmesg: [Sun May 10 22:35:14 2026] EXT4-fs (sda2): orphan cleanup on readonly fs [Sun May 10 22:35:14 2026] EXT4-fs (sda2): mounted filesystem e634e0a4-a958-46cb-abad-862d2102573f ro with ordered data mode. Quota mode: none. [Sun May 10 22:35:17 2026] EXT4-fs (sda2): re-mounted e634e0a4-a958-46cb-abad-862d2102573f r/w. Show mounted filesystems: TARGET SOURCE FSTYPE OPTIONS / /dev/sda2 ext4 rw,noatime `-/boot/firmware /dev/sda1 vfat rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro Files in neuralgic directories: /var: 2.5G /var/ 231M /var/cache 226M /var/cache/apt 179M /var/lib 147M /var/lib/apt Archived and active journals take up 8M in the file system. /opt/iobroker/backups: 576M /opt/iobroker/backups/ /opt/iobroker/iobroker-data: 852M /opt/iobroker/iobroker-data/ 791M /opt/iobroker/iobroker-data/files 156M /opt/iobroker/iobroker-data/files/vis 148M /opt/iobroker/iobroker-data/files/vis/widgets 114M /opt/iobroker/iobroker-data/files/vis-2 The five largest files in iobroker-data are: 37M /opt/iobroker/iobroker-data/objects.jsonl 37M /opt/iobroker/iobroker-data/files/radar-trap.admin/build/index.js.map 27M /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map 24M /opt/iobroker/iobroker-data/states.jsonl 22M /opt/iobroker/iobroker-data/files/residents.admin/build/index.js.map USB-Devices by-id: USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups, please always prefer the links 'by-id': /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0 *** ZigBee Settings *** ✓ Your zigbee.1 COM-Port is matching 'by-id'. Very good! Zigbee Network Settings on your coordinator/in nvbackup are: zigbee.X Extended Pan ID: *** MASKED *** Pan ID: *** MASKED *** Channel: *** MASKED *** Network Key: *** MASKED *** To unmask the settings run 'iob diag --unmask' *** NodeJS-Installation *** /usr/bin/nodejs v22.22.2 /usr/bin/node v22.22.2 /usr/bin/npm 10.9.7 /usr/bin/npx 10.9.7 ✓ Node.js installation is correct nodejs: Installed: 22.22.2-1nodesource1 Candidate: 22.22.2-1nodesource1 Version table: *** 22.22.2-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 100 /var/lib/dpkg/status 22.22.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.22.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.21.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.20.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.19.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.18.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.17.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.16.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.15.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.14.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.13.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.12.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.11.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.10.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.9.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.8.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.7.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.6.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.5.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.1-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.4.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.3.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.2.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.1.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 22.0.0-1nodesource1 1001 500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages 20.19.2+dfsg-1+deb13u2 500 500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages 20.19.2+dfsg-1 500 500 http://deb.debian.org/debian trixie/main arm64 Packages Temp directories causing deletion problem: 0 No problems detected Errors in npm tree: 0 No problems detected Checking for nodejs vulnerability: █████ ██ ██ ██████ ██████ ██████ ██████ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ██ ██ ██ ███ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ██ ███████ ███████ ██████ ██████ ██████ ██████ ██ *** ioBroker-Installation *** ioBroker Status iobroker is running on this host. Objects type: jsonl States type: jsonl Hosts: RasPiIobroker RasPiIobroker (version: 7.1.2, hostname: RasPiIobroker , alive, uptime: 954) Core adapters versions js-controller: 7.1.2 admin: 7.8.24 javascript: 9.2.2 nodejs modules from github: 1 +-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#b9a3db457ac1a6e1ef4b7ab6edcfddc0388e4b19) Adapter State + system.adapter.admin.0 : admin : RasPiIobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin system.adapter.alexa2.0 : alexa2 : RasPiIobroker - disabled + system.adapter.backitup.0 : backitup : RasPiIobroker - enabled + system.adapter.cloud.0 : cloud : RasPiIobroker - enabled + system.adapter.devices.0 : devices : RasPiIobroker - enabled + system.adapter.discovery.0 : discovery : RasPiIobroker - enabled system.adapter.dwd.0 : dwd : RasPiIobroker - enabled + system.adapter.echarts.0 : echarts : RasPiIobroker - enabled + system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: RasPiIobroker - enabled + system.adapter.epson_ecotank_et_2750.0 : epson_ecotank_et_2750 : RasPiIobroker - enabled system.adapter.fb-checkpresence.0 : fb-checkpresence : RasPiIobroker - disabled system.adapter.feiertage.0 : feiertage : RasPiIobroker - disabled system.adapter.flot.0 : flot : RasPiIobroker - disabled + system.adapter.history.0 : history : RasPiIobroker - enabled + system.adapter.hm-rega.0 : hm-rega : RasPiIobroker - enabled + system.adapter.hm-rpc.0 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : RasPiIobroker - enabled, port: 0 system.adapter.hm-rpc.3 : hm-rpc : RasPiIobroker - disabled, port: 0 system.adapter.homekit-controller.0 : homekit-controller : RasPiIobroker - disabled system.adapter.ical.0 : ical : RasPiIobroker - enabled system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: RasPiIobroker - disabled system.adapter.icons-fatcow-hosting.0 : icons-fatcow-hosting : RasPiIobroker - disabled system.adapter.icons-material-png.0 : icons-material-png : RasPiIobroker - disabled system.adapter.icons-material-svg.0 : icons-material-svg : RasPiIobroker - disabled system.adapter.icons-mfd-png.0 : icons-mfd-png : RasPiIobroker - disabled system.adapter.icons-mfd-svg.0 : icons-mfd-svg : RasPiIobroker - disabled system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: RasPiIobroker - disabled system.adapter.icons-smarthome.0 : icons-smarthome : RasPiIobroker - disabled system.adapter.icons-ultimate-png.0 : icons-ultimate-png : RasPiIobroker - disabled system.adapter.influxdb.0 : influxdb : RasPiIobroker - disabled, port: 8086 system.adapter.info.0 : info : RasPiIobroker - disabled + system.adapter.javascript.0 : javascript : RasPiIobroker - enabled + system.adapter.melcloud.0 : melcloud : RasPiIobroker - enabled + system.adapter.nina.0 : nina : RasPiIobroker - enabled system.adapter.onvif.0 : onvif : RasPiIobroker - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000 system.adapter.onvif.1 : onvif : RasPiIobroker - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000 system.adapter.onvif.2 : onvif : RasPiIobroker - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000 system.adapter.radar-trap.0 : radar-trap : RasPiIobroker - disabled + system.adapter.reolink.0 : reolink : RasPiIobroker - enabled + system.adapter.reolink.1 : reolink : RasPiIobroker - enabled system.adapter.residents.0 : residents : RasPiIobroker - disabled system.adapter.roborock.1 : roborock : RasPiIobroker - disabled + system.adapter.rpi2.0 : rpi2 : RasPiIobroker - enabled + system.adapter.shelly.0 : shelly : RasPiIobroker - enabled, port: 1882, bind: 0.0.0.0 system.adapter.smartcontrol.0 : smartcontrol : RasPiIobroker - disabled system.adapter.smartthings.0 : smartthings : RasPiIobroker - disabled + system.adapter.socketio.0 : socketio : RasPiIobroker - enabled, port: 8086, bind: 192.168.178.144, run as: admin + system.adapter.socketio.1 : socketio : RasPiIobroker - enabled, port: 8084, bind: 0.0.0.0, run as: admin system.adapter.solarmanpv.0 : solarmanpv : RasPiIobroker - disabled + system.adapter.sourceanalytix.0 : sourceanalytix : RasPiIobroker - enabled + system.adapter.sourceanalytix.1 : sourceanalytix : RasPiIobroker - enabled system.adapter.sprinklecontrol.0 : sprinklecontrol : RasPiIobroker - disabled + system.adapter.tankerkoenig.0 : tankerkoenig : RasPiIobroker - enabled + system.adapter.telegram.0 : telegram : RasPiIobroker - enabled, port: 8443, bind: 0.0.0.0 system.adapter.tr-064.0 : tr-064 : RasPiIobroker - disabled + system.adapter.tuya.0 : tuya : RasPiIobroker - enabled + system.adapter.unifi-protect.0 : unifi-protect : RasPiIobroker - enabled + system.adapter.unifi-protect.1 : unifi-protect : RasPiIobroker - enabled + system.adapter.unifi.0 : unifi : RasPiIobroker - enabled + system.adapter.virtualpowermeter.0 : virtualpowermeter : RasPiIobroker - enabled system.adapter.vis-2-widgets-radar-trap.0: vis-2-widgets-radar-trap: RasPiIobroker - disabled + system.adapter.vis-2.0 : vis-2 : RasPiIobroker - enabled system.adapter.vis-bars.0 : vis-bars : RasPiIobroker - disabled system.adapter.vis-colorpicker.0 : vis-colorpicker : RasPiIobroker - disabled system.adapter.vis-fancyswitch.0 : vis-fancyswitch : RasPiIobroker - disabled system.adapter.vis-history.0 : vis-history : RasPiIobroker - disabled system.adapter.vis-hqwidgets.0 : vis-hqwidgets : RasPiIobroker - disabled system.adapter.vis-icontwo.0 : vis-icontwo : RasPiIobroker - disabled + system.adapter.vis-inventwo.0 : vis-inventwo : RasPiIobroker - enabled system.adapter.vis-jqui-mfd.0 : vis-jqui-mfd : RasPiIobroker - disabled system.adapter.vis-justgage.0 : vis-justgage : RasPiIobroker - disabled system.adapter.vis-map.0 : vis-map : RasPiIobroker - disabled system.adapter.vis-material-advanced.0 : vis-material-advanced : RasPiIobroker - disabled system.adapter.vis-materialdesign.0 : vis-materialdesign : RasPiIobroker - disabled system.adapter.vis-metro.0 : vis-metro : RasPiIobroker - disabled system.adapter.vis-plumb.0 : vis-plumb : RasPiIobroker - disabled system.adapter.vis-rgraph.0 : vis-rgraph : RasPiIobroker - disabled system.adapter.vis.0 : vis : RasPiIobroker - enabled + system.adapter.vw-connect.0 : vw-connect : RasPiIobroker - enabled + system.adapter.web.0 : web : RasPiIobroker - enabled, port: 8082, bind: 192.168.178.144, run as: admin + system.adapter.web.1 : web : RasPiIobroker - enabled, port: 8083, bind: 192.168.178.144, run as: admin system.adapter.web.2 : web : RasPiIobroker - disabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.whatsapp-cmb.0 : whatsapp-cmb : RasPiIobroker - enabled + system.adapter.worx.0 : worx : RasPiIobroker - enabled + system.adapter.ws.0 : ws : RasPiIobroker - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.yahka.0 : yahka : RasPiIobroker - enabled + system.adapter.zigbee.1 : zigbee : RasPiIobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0 system.adapter.zigbee2mqtt.0 : zigbee2mqtt : RasPiIobroker - disabled + instance is alive Enabled adapters with bindings + system.adapter.admin.0 : admin : RasPiIobroker - enabled, port: 8081, bind: 0.0.0.0, run as: admin + system.adapter.hm-rpc.0 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.hm-rpc.1 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.hm-rpc.2 : hm-rpc : RasPiIobroker - enabled, port: 0 + system.adapter.shelly.0 : shelly : RasPiIobroker - enabled, port: 1882, bind: 0.0.0.0 + system.adapter.socketio.0 : socketio : RasPiIobroker - enabled, port: 8086, bind: 192.168.178.144, run as: admin + system.adapter.socketio.1 : socketio : RasPiIobroker - enabled, port: 8084, bind: 0.0.0.0, run as: admin + system.adapter.telegram.0 : telegram : RasPiIobroker - enabled, port: 8443, bind: 0.0.0.0 + system.adapter.web.0 : web : RasPiIobroker - enabled, port: 8082, bind: 192.168.178.144, run as: admin + system.adapter.web.1 : web : RasPiIobroker - enabled, port: 8083, bind: 192.168.178.144, run as: admin + system.adapter.ws.0 : ws : RasPiIobroker - enabled, port: 8085, bind: 0.0.0.0, run as: admin + system.adapter.zigbee.1 : zigbee : RasPiIobroker - enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0 ioBroker-Repositories ┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐ │ (index) │ name │ url │ auto upgrade │ ├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤ │ 0 │ 'stable' │ 'http://download.iobroker.net/sources-dist.json' │ false │ │ 1 │ 'beta' │ 'http://download.iobroker.net/sources-dist-latest.json' │ false │ └─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘ Active repo(s): beta Upgrade policy: none Installed ioBroker-Adapters Used repository: beta Adapter "admin" : 7.8.24 , installed 7.8.24 Adapter "alexa2" : 3.27.4 , installed 3.27.4 Adapter "backitup" : 3.3.17 , installed 3.3.17 Adapter "cloud" : 6.0.1 , installed 6.0.1 Adapter "devices" : 2.0.5 , installed 2.0.5 Adapter "discovery" : 5.0.0 , installed 5.0.0 Adapter "dwd" : 2.8.5 , installed 2.8.5 Adapter "echarts" : 3.1.0 , installed 3.1.0 Adapter "energiefluss-erweitert": 0.8.2, installed 0.8.2 Adapter "epson_ecotank_et_2750": 1.1.0, installed 1.1.0 Adapter "fb-checkpresence": 1.4.2 , installed 1.4.2 Adapter "feiertage" : 1.4.0 , installed 1.4.0 Adapter "flot" : 1.12.0 , installed 1.12.0 Adapter "history" : 4.0.0 , installed 4.0.0 Adapter "hm-rega" : 5.1.0 , installed 5.1.0 Adapter "hm-rpc" : 3.0.2 , installed 3.0.2 Adapter "homekit-controller": 0.5.11, installed 0.5.11 Adapter "ical" : 1.20.1 , installed 1.20.1 Adapter "icons-addictive-flavour-png": 0.1.0, installed 0.1.0 Adapter "icons-fatcow-hosting": 0.1.0, installed 0.1.0 Adapter "icons-material-png": 0.1.0, installed 0.1.0 Adapter "icons-material-svg": 0.1.0, installed 0.1.0 Adapter "icons-mfd-png": 1.2.1 , installed 1.2.1 Adapter "icons-mfd-svg": 1.2.0 , installed 1.2.0 Adapter "icons-open-icon-library-png": 0.1.2, installed 0.1.2 Adapter "icons-smarthome": 1.0.0 , installed 1.0.0 Adapter "icons-ultimate-png": 1.0.1, installed 1.0.1 Adapter "influxdb" : 4.0.2 , installed 4.0.2 Adapter "javascript" : 9.2.2 , installed 9.2.2 Controller "js-controller": 7.1.2 , installed 7.1.2 Adapter "melcloud" : 3.0.4 , installed 3.0.4 Adapter "nina" : 0.0.26 , installed 0.0.26 Adapter "onvif" : 1.1.4 , installed 1.1.4 Adapter "radar-trap" : 2.2.2 , installed 2.2.2 Adapter "reolink" : 1.4.2 , installed 1.4.2 Adapter "residents" : 1.1.1 , installed 1.1.1 Adapter "roborock" : 0.7.0 , installed 0.7.0 Adapter "rpi2" : 3.0.2 , installed 3.0.2 Adapter "shelly" : 10.6.1 , installed 10.6.1 Adapter "smartcontrol" : 2.0.1 , installed 2.0.1 Adapter "smartthings" : 0.3.0 , installed 0.3.0 Adapter "socketio" : 7.1.3 , installed 7.1.3 Adapter "solarmanpv" : 0.7.3 , installed 0.7.3 Adapter "sourceanalytix": 0.4.14 , installed 0.4.14 Adapter "sprinklecontrol": 1.0.5 , installed 1.0.5 Adapter "tankerkoenig" : 3.4.0 , installed 3.4.0 Adapter "telegram" : 4.1.0 , installed 4.1.0 Adapter "tr-064" : 4.3.0 , installed 4.3.0 Adapter "tuya" : 3.17.0 , installed 3.17.0 Adapter "unifi" : 0.7.0 , installed 0.7.0 Adapter "unifi-protect": 1.0.1 , installed 1.0.1 Adapter "virtualpowermeter": 1.5.0, installed 1.5.0 Adapter "vis" : 1.5.6 , installed 1.5.6 Adapter "vis-2" : 2.13.19 , installed 2.13.19 Adapter "vis-2-widgets-radar-trap": 2.3.3, installed 2.3.3 Adapter "vis-bars" : 0.1.4 , installed 0.1.4 Adapter "vis-colorpicker": 2.1.0 , installed 2.1.0 Adapter "vis-fancyswitch": 1.1.0 , installed 1.1.0 Adapter "vis-history" : 1.0.0 , installed 1.0.0 Adapter "vis-hqwidgets": 1.6.1 , installed 1.6.1 Adapter "vis-icontwo" : 2.11.3 , installed 2.11.3 Adapter "vis-inventwo" : 3.3.5 , installed 3.3.5 Adapter "vis-jqui-mfd" : 1.1.3 , installed 1.1.3 Adapter "vis-justgage" : 2.1.7 , installed 2.1.7 Adapter "vis-map" : 1.1.2 , installed 1.1.2 Adapter "vis-material-advanced": 1.7.4, installed 1.7.4 Adapter "vis-materialdesign": 0.5.9, installed 0.5.9 Adapter "vis-metro" : 1.2.0 , installed 1.2.0 Adapter "vis-plumb" : 1.0.2 , installed 1.0.2 Adapter "vis-rgraph" : 0.0.2 , installed 0.0.2 Adapter "vw-connect" : 0.8.3 , installed 0.8.1 [Updatable] Adapter "web" : 8.1.0 , installed 8.1.0 Adapter "whatsapp-cmb" : 0.3.0 , installed 0.3.0 Adapter "worx" : 3.3.0 , installed 3.3.0 Adapter "ws" : 4.1.0 , installed 4.1.0 Adapter "yahka" : 1.1.6 , installed 1.1.6 Adapter "zigbee" : 3.4.3 , installed 3.4.3 Adapter "zigbee2mqtt" : 3.2.1 , installed 3.2.1 Objects and States Please stand by - This may take a while Objects: 36090 States: 30856 *** OS-Repositories and Updates *** Hit:1 http://deb.debian.org/debian trixie InRelease Hit:2 http://deb.debian.org/debian trixie-updates InRelease Hit:3 http://archive.raspberrypi.com/debian trixie InRelease Hit:4 http://deb.debian.org/debian-security trixie-security InRelease Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease Reading package lists... Pending systemupdates: 0 *** Listening Ports *** Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 192.168.178.144:8082 0.0.0.0:* LISTEN 1001 19985 3704/io.web.0 tcp 0 0 192.168.178.144:8083 0.0.0.0:* LISTEN 1001 22167 3721/io.web.1 tcp 0 0 192.168.178.144:8086 0.0.0.0:* LISTEN 1001 21039 3512/io.socketio.0 tcp 0 0 0.0.0.0:43923 0.0.0.0:* LISTEN 1001 18821 3214/io.yahka.0 tcp 0 0 192.168.178.144:2001 0.0.0.0:* LISTEN 1001 17988 3021/io.hm-rpc.0 tcp 0 0 192.168.178.144:2010 0.0.0.0:* LISTEN 1001 18088 3068/io.hm-rpc.2 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 1001 16901 2851/iobroker.js-co tcp 0 0 127.0.0.1:9001 0.0.0.0:* LISTEN 1001 15249 2851/iobroker.js-co tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN 0 265 1/init tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 0 9325 860/sshd: /usr/sbin tcp 0 0 192.168.178.144:8701 0.0.0.0:* LISTEN 1001 16223 3034/io.hm-rpc.1 tcp6 0 0 :::8085 :::* LISTEN 1001 22531 3737/io.ws.0 tcp6 0 0 :::8084 :::* LISTEN 1001 19879 3524/io.socketio.1 tcp6 0 0 :::8081 :::* LISTEN 1001 17822 2879/io.admin.0 tcp6 0 0 :::111 :::* LISTEN 0 1206 1/init tcp6 0 0 :::22 :::* LISTEN 0 9335 860/sshd: /usr/sbin udp 0 0 0.0.0.0:111 0.0.0.0:* 0 5511 1/init udp 0 0 0.0.0.0:5353 0.0.0.0:* 101 1911 645/avahi-daemon: r udp 0 0 0.0.0.0:5683 0.0.0.0:* 1001 18874 3117/io.shelly.0 udp 0 0 0.0.0.0:39001 0.0.0.0:* 101 1913 645/avahi-daemon: r udp 0 0 0.0.0.0:6666 0.0.0.0:* 1001 19043 3125/io.tuya.0 udp 0 0 0.0.0.0:6667 0.0.0.0:* 1001 19044 3125/io.tuya.0 udp6 0 0 :::111 :::* 0 5512 1/init udp6 0 0 fe80::3474:42d7:a07:546 :::* 0 8348 699/NetworkManager udp6 0 0 :::5353 :::* 101 1912 645/avahi-daemon: r udp6 0 0 :::59000 :::* 101 1914 645/avahi-daemon: r *** Log File - Last 25 Lines *** 2026-05-10 22:55:28.844 - info: dwd.0 (4317) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason 2026-05-10 22:55:29.393 - info: host.RasPiIobroker instance system.adapter.dwd.0 having pid 4317 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION) 2026-05-10 22:55:48.086 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:55:48.310 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:55:50.902 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Connect locally to device 2026-05-10 22:55:50.902 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg Init with IP=192.168.178.194, Key=d5R&$cSpUI/[yvX#, Version=3.3 2026-05-10 22:55:53.974 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:56:17.046 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:56:51.382 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:56:54.156 - info: tuya.0 (3125) bfacf54b96372f497255jg: Connect locally to device 2026-05-10 22:56:54.156 - info: tuya.0 (3125) bfacf54b96372f497255jg Init with IP=192.168.178.53, Key=gd/V|.sWrld+{7Bp, Version=3.3 2026-05-10 22:56:57.239 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:57:00.118 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:57:20.310 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:58:03.190 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:58:03.382 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:58:05.959 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Connect locally to device 2026-05-10 22:58:05.960 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg Init with IP=192.168.178.194, Key=d5R&$cSpUI/[yvX#, Version=3.3 2026-05-10 22:58:09.014 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:58:32.086 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.194:6668 2026-05-10 22:59:06.463 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:59:10.969 - info: tuya.0 (3125) bfacf54b96372f497255jg: Connect locally to device 2026-05-10 22:59:10.974 - info: tuya.0 (3125) bfacf54b96372f497255jg Init with IP=192.168.178.53, Key=gd/V|.sWrld+{7Bp, Version=3.3 2026-05-10 22:59:14.038 - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.53:6668 2026-05-10 22:59:15.163 - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.194:6668============ Mark until here for C&P =============
iob diag has finished.
Da fehlt der Anfang.
-
Das schaut soweit i. O. aus.
Ich würde wohl statt des Beta/Latest-Reppo da stable verwenden. -
Das schaut soweit i. O. aus.
Ich würde wohl statt des Beta/Latest-Reppo da stable verwenden. -
@Thomas-Braun Kann ich das einfach in den Basiseinstellungen anklicken und speichern oder mache ich mir da eine neue Baustelle auf?
Upgrade automatisch?Die Quellen kannst du in den Einstellungen ändern.
Von automatischen Upgrades lasse ich die Finger, ich sehe gerne kommen, was da aktualisiert wird.
Hey! Du scheinst an dieser Unterhaltung interessiert zu sein, hast aber noch kein Konto.
Hast du es satt, bei jedem Besuch durch die gleichen Beiträge zu scrollen? Wenn du dich für ein Konto anmeldest, kommst du immer genau dorthin zurück, wo du zuvor warst, und kannst dich über neue Antworten benachrichtigen lassen (entweder per E-Mail oder Push-Benachrichtigung). Du kannst auch Lesezeichen speichern und Beiträge positiv bewerten, um anderen Community-Mitgliedern deine Wertschätzung zu zeigen.
Mit deinem Input könnte dieser Beitrag noch besser werden 💗
Registrieren Anmelden398
Online33.0k
Benutzer83.2k
Themen1.3m
Beiträge