wichtiges UPDATE für controller 7.2.2 im stable

[Homoran]

@Würfel sagte:

Wie bekomme ich die nachträglich rein?

Das ist noch mitten im Restore!
Nicht stören!

[Thomas Braun]

@Würfel sagte:

Zumindest für den rpi2 fehlt dir das Paket libgpiod-dev:

error libgpiod-dev is not installed

Mit deinen Meldungen kann man nichts anfangen ohne zu wissen an welcher Stelle beim Restore und auf welcher Basis die erscheinen. Im Zuge des Restores können das aber ganz normale Meldungen sein. Abwarten.

[Würfel]

Ist das auch noch normal?`

host.RasPiIobroker
2026-05-10 21:53:45.470	error	Cannot download and install adapter "rpi2@2.4.0". To retry it disable/enable the adapter or restart host. Also check the error messages in the log!

host.RasPiIobroker
2026-05-10 21:53:43.429	error	iobroker npm-install: host.RasPiIobroker Cannot install iobroker.rpi2@2.4.0: 1

host.RasPiIobroker
2026-05-10 21:53:43.428	error	iobroker npm-install: npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.75+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.22.2npm error gyp ERR! node-gyp -v v11.5.0npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-05-10T19_53_23_585Z-debug-0.log

host.RasPiIobroker
2026-05-10 21:53:17.435	error	iobroker npm-install: host.RasPiIobroker Cannot install iobroker.rpi2@2.4.0: 1

host.RasPiIobroker
2026-05-10 21:53:17.433	error	iobroker npm-install: npm error code 1npm error path /opt/iobroker/node_modules/opengpionpm error command failednpm error command sh -c node-gyp rebuildnpm error make: Entering directory '/opt/iobroker/node_modules/opengpio/build'npm error CXX(target) Release/obj.target/opengpio/cpp/opengpio.onpm error make: Leaving directory '/opt/iobroker/node_modules/opengpio/build'npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioInput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:14:17: error: expected primary-expression before ‘line’npm error 14 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:19:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~npm error | gpiod::linenpm error In file included from /usr/include/gpiodcxx/chip.hpp:21,npm error from /usr/include/gpiod.hpp:27,npm error from ../cpp/opengpio.cpp:3:npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:19:58: error: ‘DIRECTION_INPUT’ is not a member of ‘gpiod::line_request’npm error 19 | line.request({resourceName, gpiod::line_request::DIRECTION_INPUT, 0});npm error | ^~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:28:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:30:22: error: ‘line’ is not capturednpm error 30 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:28:66: note: the lambda has no capture-defaultnpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:34:52: error: ‘line’ is not capturednpm error 34 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:33:67: note: the lambda has no capture-defaultnpm error 33 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:28:62: note: ‘<typeprefixerror>line’ declared herenpm error 28 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioOutput(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:49:17: error: expected primary-expression before ‘line’npm error 49 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:54:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:54:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 54 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:63:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:66:9: error: ‘line’ is not capturednpm error 66 | line.set_value(value); });npm error | ^~~~npm error ../cpp/opengpio.cpp:63:66: note: the lambda has no capture-defaultnpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:69:52: error: ‘line’ is not capturednpm error 69 | { line.release(); });npm error | ^~~~npm error ../cpp/opengpio.cpp:68:67: note: the lambda has no capture-defaultnpm error 68 | Napi::Function cleanup = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:63:62: note: ‘<typeprefixerror>line’ declared herenpm error 63 | Napi::Function setter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:81:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 81 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:92:17: error: expected primary-expression before ‘line’npm error 92 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:100:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:100:58: error: ‘EVENT_BOTH_EDGES’ is not a member of ‘gpiod::line_request’npm error 100 | line.request({resourceName, gpiod::line_request::EVENT_BOTH_EDGES, 0}, 0);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:109:62: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:111:22: error: ‘line’ is not capturednpm error 111 | bool value = line.get_value();npm error | ^~~~npm error ../cpp/opengpio.cpp:109:66: note: the lambda has no capture-defaultnpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioWatch(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:115:11: error: ‘struct WatchContext’ has no member named ‘line’npm error 115 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:127:25: error: expected primary-expression before ‘line’npm error 127 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:131:33: error: ‘line’ is not capturednpm error 131 | bool hasEvent = line.event_wait(chrono::milliseconds(1));npm error | ^~~~npm error ../cpp/opengpio.cpp:124:10: note: the lambda has no capture-defaultnpm error 124 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:109:62: note: ‘<typeprefixerror>line’ declared herenpm error 109 | Napi::Function getter = Napi::Function::New(info.Env(), [line](const Napi::CallbackInfo &info)npm error | ^~~~npm error ../cpp/opengpio.cpp:134:28: error: ‘line_event’ is not a member of ‘gpiod’; did you mean ‘info_event’?npm error 134 | gpiod::line_event event = line.event_read();npm error | ^~~~~~~~~~npm error | info_eventnpm error ../cpp/opengpio.cpp:135:34: error: ‘event’ was not declared in this scope; did you mean ‘servent’?npm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~npm error | serventnpm error ../cpp/opengpio.cpp:135:61: error: ‘gpiod::line_event’ has not been declarednpm error 135 | bool value = event.event_type == gpiod::line_event::RISING_EDGE ? true : false;npm error | ^~~~~~~~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:147:19: error: ‘struct WatchContext’ has no member named ‘line’npm error 147 | data->line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp: At global scope:npm error ../cpp/opengpio.cpp:168:12: error: ‘line’ in namespace ‘gpiod’ does not name a typenpm error 168 | gpiod::line line;npm error | ^~~~npm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In function ‘Napi::Array GpioPwm(const Napi::CallbackInfo&)’:npm error ../cpp/opengpio.cpp:196:17: error: expected primary-expression before ‘line’npm error 196 | gpiod::line line = chip.get_line(lineNumber);npm error | ^~~~npm error ../cpp/opengpio.cpp:201:9: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp:201:58: error: ‘DIRECTION_OUTPUT’ is not a member of ‘gpiod::line_request’npm error 201 | line.request({resourceName, gpiod::line_request::DIRECTION_OUTPUT, 0}, 1);npm error | ^~~~~~~~~~~~~~~~npm error ../cpp/opengpio.cpp:213:11: error: ‘struct PwmContext’ has no member named ‘line’npm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:213:18: error: ‘line’ was not declared in this scope; did you mean ‘gpiod::line’?npm error 213 | data->line = line;npm error | ^~~~npm error | gpiod::linenpm error /usr/include/gpiodcxx/line.hpp:24:11: note: ‘gpiod::line’ declared herenpm error 24 | namespace line {npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:224:25: error: expected primary-expression before ‘line’npm error 224 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:264:17: error: ‘line’ is not capturednpm error 264 | line.set_value(true);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp:278:17: error: ‘line’ is not capturednpm error 278 | line.set_value(false);npm error | ^~~~npm error ../cpp/opengpio.cpp:221:10: note: the lambda has no capture-defaultnpm error 221 | [](uv_work_t *req)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error ../cpp/opengpio.cpp: In lambda function:npm error ../cpp/opengpio.cpp:327:25: error: expected primary-expression before ‘line’npm error 327 | gpiod::line line = data->line;npm error | ^~~~npm error ../cpp/opengpio.cpp:328:13: error: ‘line’ is not capturednpm error 328 | line.release();npm error | ^~~~npm error ../cpp/opengpio.cpp:324:10: note: the lambda has no capture-defaultnpm error 324 | [](uv_work_t *req, int status)npm error | ^npm error ../cpp/opengpio.cpp:213:18: note: ‘<typeprefixerror>line’ declared herenpm error 213 | data->line = line;npm error | ^~~~npm error make: *** [opengpio.target.mk:108: Release/obj.target/opengpio/cpp/opengpio.o] Error 1npm error gyp ERR! build error npm error gyp ERR! stack Error: `make` failed with exit code: 2npm error gyp ERR! stack at ChildProcess.<anonymous> (/usr/lib/node_modules/npm/node_modules/node-gyp/lib/build.js:219:23)npm error gyp ERR! System Linux 6.12.75+rpt-rpi-v8npm error gyp ERR! command "/usr/bin/node" "/usr/lib/node_modules/npm/node_modules/node-gyp/bin/node-gyp.js" "rebuild"npm error gyp ERR! cwd /opt/iobroker/node_modules/opengpionpm error gyp ERR! node -v v22.22.2npm error gyp ERR! node-gyp -v v11.5.0npm error gyp ERR! not oknpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-05-10T19_52_54_932Z-debug-0.log

host.RasPiIobroker
2026-05-10 21:52:49.002	error	iobroker npm-install: host.RasPiIobroker Cannot install iobroker.rpi2@3.0.2: 1

host.RasPiIobroker
2026-05-10 21:52:49.001	error	iobroker npm-install: npm error code 1npm error path /opt/iobroker/node_modules/iobroker.rpi2npm error command failednpm error command sh -c bash ./preinstall-check.shnpm error Checking package: libgpiod-dev >= 2.2npm error libgpiod-dev is not installednpm error A complete log of this run can be found in: /home/iobroker/.npm/_logs/2026-05-10T19_52_36_693Z-debug-0.log

host.RasPiIobroker
2026-05-10 21:38:44.002	error	iobroker npm-install: host.RasPiIobroker Unknown packet name info. Please install packages from outside the repository using "iobroker url <url-or-package>"!adapter "info" cannot be installed: Unknown packet name info. Please install packages from outside the repository using "iobroker url <url-or-package>"!

[Thomas Braun]

@Würfel

Zu rpi2 hatte ich doch schon was geschrieben...

[Würfel]

Ok,
ok kannte ich nicht heraus lesen ob es dazu gehört noch

host.RasPiIobroker
2026-05-10 21:53:44.468	info	iobroker npm-install: exit 25

Das war die letzte meldung im log

Ist Restore durch?

[Thomas Braun]

@Würfel

Was liefert

sudo apt update 
apt policy libgpiod-dev

Nachinstallieren ggfls. per

sudo apt install libgpiod-dev

[Würfel]

iob@RasPiIobroker:~ $ sudo apt update
[sudo] password for iob:
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://deb.debian.org/debian-security trixie-security InRelease
Hit:4 http://archive.raspberrypi.com/debian trixie InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
All packages are up to date.
iob@RasPiIobroker:~ $ apt policy libgpiod-dev
libgpiod-dev:
  Installed: 2.2.1-2+deb13u1
  Candidate: 2.2.1-2+deb13u1
  Version table:
 *** 2.2.1-2+deb13u1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages
        100 /var/lib/dpkg/status
iob@RasPiIobroker:~ $ sudo apt install libgpiod-dev
libgpiod-dev is already the newest version (2.2.1-2+deb13u1).
Summary:
  Upgrading: 0, Installing: 0, Removing: 0, Not Upgrading: 0

[Homoran]

@Würfel sagte:

install adapter "rpi2@2.4.0".

Bei trixie brauchst du 3.x

[Thomas Braun]

@Homoran sagte:

Bei trixie brauchst du 3.x

Stibimpt. Wie praktisch, dass das eh seit Monaten die vorgesehene Version ist:

rpi2
latest:	3.0.2 for 5 months
stable:	3.0.2 for 5 months

[Würfel]

Ist drauf, rpi2 Version 3.0.2

Hab eben noch weil im Host angezeigt wurde JS von 7.0 auf 7.1 update angeklickt.

Nach einer Weile erschein die Startseite zum Anmelden und nun hab ich ein I mit Kreis drum wo einer im Kreis die Farbe dreht.

Nach einer Weile öffnete die Adminpage. Ist das I mit dem drehenden Balken ein Ladebildschirm oder was macht das System in dem Augenblick?

[Thomas Braun]

@Würfel

Zeig mal die Ausgabe von

iob diag

nun. Nix klicken, ist ein Terminal-Befehl.

[Würfel]

========== Start marking the full check here ===========

```bash
Script v.2026-01-31

*** BASE SYSTEM ***
Operating System: Debian GNU/Linux 13 (trixie)
 Static hostname: RasPiIobroker
       Icon name: computer
          Kernel: Linux 6.12.75+rpt-rpi-v8
    Architecture: arm64
OS is similar to:

Model           : Raspberry Pi 4 Model B Rev 1.5
Docker          : false
Virtualization  : none
Kernel          : aarch64
Userland        : 64 bit

Systemuptime and Load:
 22:58:19 up 23 min,  1 user,  load average: 0.39, 1.20, 1.76
CPU threads: 4


*** LIFE CYCLE STATUS ***
Operating System is the current Debian stable version codenamed 'trixie'!

*** RASPBERRY THROTTLING ***
Current issues:
No throttling issues detected.

Previously detected issues:
No throttling issues detected.

*** TIME AND TIMEZONES ***
               Local time: Sun 2026-05-10 22:58:20 CEST
           Universal time: Sun 2026-05-10 20:58:20 UTC
                 RTC time: n/a
                Time zone: Europe/Berlin (CEST, +0200)
System clock synchronized: yes
              NTP service: active
          RTC in local TZ: no

*** Users and Groups ***
User that called 'iob diag':
iob
HOME=/home/iob
GROUPS=iob adm dialout cdrom sudo audio video plugdev games users netdev gpio i2c spi render input iobroker

User that is running 'js-controller':
iobroker
HOME=/home/iobroker
SUDO_HOME=/home/iob
GROUPS=iobroker tty dialout audio video plugdev bluetooth gpio i2c

*** DISPLAY-SERVER SETUP ***
Display-Server:         false
Unit display-manager.service could not be found.
Display-Manager:
Desktop:
Session:                tty

*** MEMORY ***
               total        used        free      shared  buff/cache   available
Mem:            8.2G        4.7G        2.0G         12M        1.6G        3.5G
Swap:           2.1G          0B        2.1G
Total:           10G        4.7G        4.2G

Active iob-Instances:   42

         7819 M total memory
         4492 M used memory
         4371 M active memory
          971 M inactive memory
         1929 M free memory
          195 M buffer memory
         1320 M swap cache
         2047 M total swap
            0 M used swap
         2047 M free swap

*** top - Table Of Processes  ***
top - 22:58:20 up 23 min,  1 user,  load average: 0.39, 1.20, 1.76
Tasks: 235 total,   1 running, 234 sleeping,   0 stopped,   0 zombie
%Cpu(s): 10.2 us,  2.0 sy,  0.0 ni, 85.7 id,  2.0 wa,  0.0 hi,  0.0 si,  0.0 st
MiB Mem :   7819.7 total,   1927.7 free,   4494.2 used,   1516.9 buff/cache
MiB Swap:   2048.0 total,   2048.0 free,      0.0 used.   3325.5 avail Mem

*** FAILED SERVICES ***

  UNIT LOAD ACTIVE SUB DESCRIPTION

0 loaded units listed.


*** DMESG CRITICAL ERRORS ***
No critical errors detected

*** FILESYSTEM ***
Filesystem     Type      Size  Used Avail Use% Mounted on
udev           devtmpfs  3.6G     0  3.6G   0% /dev
tmpfs          tmpfs     1.6G  9.1M  1.6G   1% /run
/dev/sda2      ext4      110G   18G   88G  17% /
tmpfs          tmpfs     3.9G     0  3.9G   0% /dev/shm
tmpfs          tmpfs     5.0M   16K  5.0M   1% /run/lock
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/systemd-journald.service
tmpfs          tmpfs     3.9G  2.6M  3.9G   1% /tmp
/dev/sda1      vfat      505M   65M  440M  13% /boot/firmware
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/serial-getty@ttyS0.service
tmpfs          tmpfs     1.0M     0  1.0M   0% /run/credentials/getty@tty1.service
tmpfs          tmpfs     782M  8.0K  782M   1% /run/user/1000

Messages concerning ext4 filesystem in dmesg:
[Sun May 10 22:35:14 2026] EXT4-fs (sda2): orphan cleanup on readonly fs
[Sun May 10 22:35:14 2026] EXT4-fs (sda2): mounted filesystem e634e0a4-a958-46cb-abad-862d2102573f ro with ordered data mode. Quota mode: none.
[Sun May 10 22:35:17 2026] EXT4-fs (sda2): re-mounted e634e0a4-a958-46cb-abad-862d2102573f r/w.

Show mounted filesystems:
TARGET           SOURCE    FSTYPE OPTIONS
/                /dev/sda2 ext4   rw,noatime
`-/boot/firmware /dev/sda1 vfat   rw,relatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,errors=remount-ro

Files in neuralgic directories:

/var:
2.5G    /var/
231M    /var/cache
226M    /var/cache/apt
179M    /var/lib
147M    /var/lib/apt

Archived and active journals take up 8M in the file system.

/opt/iobroker/backups:
576M    /opt/iobroker/backups/

/opt/iobroker/iobroker-data:
852M    /opt/iobroker/iobroker-data/
791M    /opt/iobroker/iobroker-data/files
156M    /opt/iobroker/iobroker-data/files/vis
148M    /opt/iobroker/iobroker-data/files/vis/widgets
114M    /opt/iobroker/iobroker-data/files/vis-2

The five largest files in iobroker-data are:
37M     /opt/iobroker/iobroker-data/objects.jsonl
37M     /opt/iobroker/iobroker-data/files/radar-trap.admin/build/index.js.map
27M     /opt/iobroker/iobroker-data/files/tankerkoenig.admin/build/index.js.map
24M     /opt/iobroker/iobroker-data/states.jsonl
22M     /opt/iobroker/iobroker-data/files/residents.admin/build/index.js.map

USB-Devices by-id:
USB-Sticks - Avoid direct links to /dev/tty* in your adapter setups,
please always prefer the links 'by-id':

/dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0

*** ZigBee Settings ***

✓ Your zigbee.1 COM-Port is matching 'by-id'. Very good!

Zigbee Network Settings on your coordinator/in nvbackup are:

zigbee.X
Extended Pan ID:
*** MASKED ***
Pan ID:
*** MASKED ***
Channel:
*** MASKED ***
Network Key:
*** MASKED ***

To unmask the settings run 'iob diag --unmask'


*** NodeJS-Installation ***

/usr/bin/nodejs         v22.22.2
/usr/bin/node           v22.22.2
/usr/bin/npm            10.9.7
/usr/bin/npx            10.9.7

✓ Node.js installation is correct

nodejs:
  Installed: 22.22.2-1nodesource1
  Candidate: 22.22.2-1nodesource1
  Version table:
 *** 22.22.2-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
        100 /var/lib/dpkg/status
     22.22.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.22.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.21.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.20.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.19.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.18.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.17.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.16.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.15.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.14.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.13.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.12.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.11.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.10.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.9.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.8.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.7.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.6.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.5.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.1-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.4.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.3.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.2.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.1.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     22.0.0-1nodesource1 1001
        500 https://deb.nodesource.com/node_22.x nodistro/main arm64 Packages
     20.19.2+dfsg-1+deb13u2 500
        500 http://deb.debian.org/debian-security trixie-security/main arm64 Packages
     20.19.2+dfsg-1 500
        500 http://deb.debian.org/debian trixie/main arm64 Packages

Temp directories causing deletion problem: 0
No problems detected

Errors in npm tree: 0
No problems detected

Checking for nodejs vulnerability:


 █████  ██      ██           ██████   ██████   ██████  ██████         ██
██   ██ ██      ██          ██       ██    ██ ██    ██ ██   ██     ██  ██
███████ ██      ██          ██   ███ ██    ██ ██    ██ ██   ██         ██
██   ██ ██      ██          ██    ██ ██    ██ ██    ██ ██   ██     ██  ██
██   ██ ███████ ███████      ██████   ██████   ██████  ██████         ██



*** ioBroker-Installation ***

ioBroker Status
iobroker is running on this host.


Objects type: jsonl
States  type: jsonl

Hosts:
RasPiIobroker       RasPiIobroker (version: 7.1.2, hostname: RasPiIobroker , alive, uptime: 954)

Core adapters versions
js-controller:  7.1.2
admin:          7.8.24
javascript:     9.2.2

nodejs modules from github:     1
+-- iobroker.sourceanalytix@0.4.14 (git+ssh://git@github.com/DrozmotiX/ioBroker.sourceanalytix.git#b9a3db457ac1a6e1ef4b7ab6edcfddc0388e4b19)

Adapter State
+ system.adapter.admin.0                  : admin                 : RasPiIobroker                            -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
  system.adapter.alexa2.0                 : alexa2                : RasPiIobroker                            - disabled
+ system.adapter.backitup.0               : backitup              : RasPiIobroker                            -  enabled
+ system.adapter.cloud.0                  : cloud                 : RasPiIobroker                            -  enabled
+ system.adapter.devices.0                : devices               : RasPiIobroker                            -  enabled
+ system.adapter.discovery.0              : discovery             : RasPiIobroker                            -  enabled
  system.adapter.dwd.0                    : dwd                   : RasPiIobroker                            -  enabled
+ system.adapter.echarts.0                : echarts               : RasPiIobroker                            -  enabled
+ system.adapter.energiefluss-erweitert.0 : energiefluss-erweitert: RasPiIobroker                            -  enabled
+ system.adapter.epson_ecotank_et_2750.0  : epson_ecotank_et_2750 : RasPiIobroker                            -  enabled
  system.adapter.fb-checkpresence.0       : fb-checkpresence      : RasPiIobroker                            - disabled
  system.adapter.feiertage.0              : feiertage             : RasPiIobroker                            - disabled
  system.adapter.flot.0                   : flot                  : RasPiIobroker                            - disabled
+ system.adapter.history.0                : history               : RasPiIobroker                            -  enabled
+ system.adapter.hm-rega.0                : hm-rega               : RasPiIobroker                            -  enabled
+ system.adapter.hm-rpc.0                 : hm-rpc                : RasPiIobroker                            -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : RasPiIobroker                            -  enabled, port: 0
+ system.adapter.hm-rpc.2                 : hm-rpc                : RasPiIobroker                            -  enabled, port: 0
  system.adapter.hm-rpc.3                 : hm-rpc                : RasPiIobroker                            - disabled, port: 0
  system.adapter.homekit-controller.0     : homekit-controller    : RasPiIobroker                            - disabled
  system.adapter.ical.0                   : ical                  : RasPiIobroker                            -  enabled
  system.adapter.icons-addictive-flavour-png.0: icons-addictive-flavour-png: RasPiIobroker                            - disabled
  system.adapter.icons-fatcow-hosting.0   : icons-fatcow-hosting  : RasPiIobroker                            - disabled
  system.adapter.icons-material-png.0     : icons-material-png    : RasPiIobroker                            - disabled
  system.adapter.icons-material-svg.0     : icons-material-svg    : RasPiIobroker                            - disabled
  system.adapter.icons-mfd-png.0          : icons-mfd-png         : RasPiIobroker                            - disabled
  system.adapter.icons-mfd-svg.0          : icons-mfd-svg         : RasPiIobroker                            - disabled
  system.adapter.icons-open-icon-library-png.0: icons-open-icon-library-png: RasPiIobroker                            - disabled
  system.adapter.icons-smarthome.0        : icons-smarthome       : RasPiIobroker                            - disabled
  system.adapter.icons-ultimate-png.0     : icons-ultimate-png    : RasPiIobroker                            - disabled
  system.adapter.influxdb.0               : influxdb              : RasPiIobroker                            - disabled, port: 8086
  system.adapter.info.0                   : info                  : RasPiIobroker                            - disabled
+ system.adapter.javascript.0             : javascript            : RasPiIobroker                            -  enabled
+ system.adapter.melcloud.0               : melcloud              : RasPiIobroker                            -  enabled
+ system.adapter.nina.0                   : nina                  : RasPiIobroker                            -  enabled
  system.adapter.onvif.0                  : onvif                 : RasPiIobroker                            - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000
  system.adapter.onvif.1                  : onvif                 : RasPiIobroker                            - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000
  system.adapter.onvif.2                  : onvif                 : RasPiIobroker                            - disabled, port: 80, 443, 7575, 8000, 8080, 8081, 8899, 9000
  system.adapter.radar-trap.0             : radar-trap            : RasPiIobroker                            - disabled
+ system.adapter.reolink.0                : reolink               : RasPiIobroker                            -  enabled
+ system.adapter.reolink.1                : reolink               : RasPiIobroker                            -  enabled
  system.adapter.residents.0              : residents             : RasPiIobroker                            - disabled
  system.adapter.roborock.1               : roborock              : RasPiIobroker                            - disabled
+ system.adapter.rpi2.0                   : rpi2                  : RasPiIobroker                            -  enabled
+ system.adapter.shelly.0                 : shelly                : RasPiIobroker                            -  enabled, port: 1882, bind: 0.0.0.0
  system.adapter.smartcontrol.0           : smartcontrol          : RasPiIobroker                            - disabled
  system.adapter.smartthings.0            : smartthings           : RasPiIobroker                            - disabled
+ system.adapter.socketio.0               : socketio              : RasPiIobroker                            -  enabled, port: 8086, bind: 192.168.178.144, run as: admin
+ system.adapter.socketio.1               : socketio              : RasPiIobroker                            -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
  system.adapter.solarmanpv.0             : solarmanpv            : RasPiIobroker                            - disabled
+ system.adapter.sourceanalytix.0         : sourceanalytix        : RasPiIobroker                            -  enabled
+ system.adapter.sourceanalytix.1         : sourceanalytix        : RasPiIobroker                            -  enabled
  system.adapter.sprinklecontrol.0        : sprinklecontrol       : RasPiIobroker                            - disabled
+ system.adapter.tankerkoenig.0           : tankerkoenig          : RasPiIobroker                            -  enabled
+ system.adapter.telegram.0               : telegram              : RasPiIobroker                            -  enabled, port: 8443, bind: 0.0.0.0
  system.adapter.tr-064.0                 : tr-064                : RasPiIobroker                            - disabled
+ system.adapter.tuya.0                   : tuya                  : RasPiIobroker                            -  enabled
+ system.adapter.unifi-protect.0          : unifi-protect         : RasPiIobroker                            -  enabled
+ system.adapter.unifi-protect.1          : unifi-protect         : RasPiIobroker                            -  enabled
+ system.adapter.unifi.0                  : unifi                 : RasPiIobroker                            -  enabled
+ system.adapter.virtualpowermeter.0      : virtualpowermeter     : RasPiIobroker                            -  enabled
  system.adapter.vis-2-widgets-radar-trap.0: vis-2-widgets-radar-trap: RasPiIobroker                            - disabled
+ system.adapter.vis-2.0                  : vis-2                 : RasPiIobroker                            -  enabled
  system.adapter.vis-bars.0               : vis-bars              : RasPiIobroker                            - disabled
  system.adapter.vis-colorpicker.0        : vis-colorpicker       : RasPiIobroker                            - disabled
  system.adapter.vis-fancyswitch.0        : vis-fancyswitch       : RasPiIobroker                            - disabled
  system.adapter.vis-history.0            : vis-history           : RasPiIobroker                            - disabled
  system.adapter.vis-hqwidgets.0          : vis-hqwidgets         : RasPiIobroker                            - disabled
  system.adapter.vis-icontwo.0            : vis-icontwo           : RasPiIobroker                            - disabled
+ system.adapter.vis-inventwo.0           : vis-inventwo          : RasPiIobroker                            -  enabled
  system.adapter.vis-jqui-mfd.0           : vis-jqui-mfd          : RasPiIobroker                            - disabled
  system.adapter.vis-justgage.0           : vis-justgage          : RasPiIobroker                            - disabled
  system.adapter.vis-map.0                : vis-map               : RasPiIobroker                            - disabled
  system.adapter.vis-material-advanced.0  : vis-material-advanced : RasPiIobroker                            - disabled
  system.adapter.vis-materialdesign.0     : vis-materialdesign    : RasPiIobroker                            - disabled
  system.adapter.vis-metro.0              : vis-metro             : RasPiIobroker                            - disabled
  system.adapter.vis-plumb.0              : vis-plumb             : RasPiIobroker                            - disabled
  system.adapter.vis-rgraph.0             : vis-rgraph            : RasPiIobroker                            - disabled
  system.adapter.vis.0                    : vis                   : RasPiIobroker                            -  enabled
+ system.adapter.vw-connect.0             : vw-connect            : RasPiIobroker                            -  enabled
+ system.adapter.web.0                    : web                   : RasPiIobroker                            -  enabled, port: 8082, bind: 192.168.178.144, run as: admin
+ system.adapter.web.1                    : web                   : RasPiIobroker                            -  enabled, port: 8083, bind: 192.168.178.144, run as: admin
  system.adapter.web.2                    : web                   : RasPiIobroker                            - disabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.whatsapp-cmb.0           : whatsapp-cmb          : RasPiIobroker                            -  enabled
+ system.adapter.worx.0                   : worx                  : RasPiIobroker                            -  enabled
+ system.adapter.ws.0                     : ws                    : RasPiIobroker                            -  enabled, port: 8085, bind: 0.0.0.0, run as: admin
+ system.adapter.yahka.0                  : yahka                 : RasPiIobroker                            -  enabled
+ system.adapter.zigbee.1                 : zigbee                : RasPiIobroker                            -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0
  system.adapter.zigbee2mqtt.0            : zigbee2mqtt           : RasPiIobroker                            - disabled

+ instance is alive

Enabled adapters with bindings
+ system.adapter.admin.0                  : admin                 : RasPiIobroker                            -  enabled, port: 8081, bind: 0.0.0.0, run as: admin
+ system.adapter.hm-rpc.0                 : hm-rpc                : RasPiIobroker                            -  enabled, port: 0
+ system.adapter.hm-rpc.1                 : hm-rpc                : RasPiIobroker                            -  enabled, port: 0
+ system.adapter.hm-rpc.2                 : hm-rpc                : RasPiIobroker                            -  enabled, port: 0
+ system.adapter.shelly.0                 : shelly                : RasPiIobroker                            -  enabled, port: 1882, bind: 0.0.0.0
+ system.adapter.socketio.0               : socketio              : RasPiIobroker                            -  enabled, port: 8086, bind: 192.168.178.144, run as: admin
+ system.adapter.socketio.1               : socketio              : RasPiIobroker                            -  enabled, port: 8084, bind: 0.0.0.0, run as: admin
+ system.adapter.telegram.0               : telegram              : RasPiIobroker                            -  enabled, port: 8443, bind: 0.0.0.0
+ system.adapter.web.0                    : web                   : RasPiIobroker                            -  enabled, port: 8082, bind: 192.168.178.144, run as: admin
+ system.adapter.web.1                    : web                   : RasPiIobroker                            -  enabled, port: 8083, bind: 192.168.178.144, run as: admin
+ system.adapter.ws.0                     : ws                    : RasPiIobroker                            -  enabled, port: 8085, bind: 0.0.0.0, run as: admin
+ system.adapter.zigbee.1                 : zigbee                : RasPiIobroker                            -  enabled, port: /dev/serial/by-id/usb-ITead_Sonoff_Zigbee_3.0_USB_Dongle_Plus_1c87ccd6d41bef11984da4d94909ffd0-if00-port0

ioBroker-Repositories
┌─────────┬──────────┬─────────────────────────────────────────────────────────┬──────────────┐
│ (index) │ name     │ url                                                     │ auto upgrade │
├─────────┼──────────┼─────────────────────────────────────────────────────────┼──────────────┤
│ 0       │ 'stable' │ 'http://download.iobroker.net/sources-dist.json'        │ false        │
│ 1       │ 'beta'   │ 'http://download.iobroker.net/sources-dist-latest.json' │ false        │
└─────────┴──────────┴─────────────────────────────────────────────────────────┴──────────────┘

Active repo(s): beta
Upgrade policy: none

Installed ioBroker-Adapters
Used repository: beta
Adapter    "admin"        : 7.8.24   , installed 7.8.24
Adapter    "alexa2"       : 3.27.4   , installed 3.27.4
Adapter    "backitup"     : 3.3.17   , installed 3.3.17
Adapter    "cloud"        : 6.0.1    , installed 6.0.1
Adapter    "devices"      : 2.0.5    , installed 2.0.5
Adapter    "discovery"    : 5.0.0    , installed 5.0.0
Adapter    "dwd"          : 2.8.5    , installed 2.8.5
Adapter    "echarts"      : 3.1.0    , installed 3.1.0
Adapter    "energiefluss-erweitert": 0.8.2, installed 0.8.2
Adapter    "epson_ecotank_et_2750": 1.1.0, installed 1.1.0
Adapter    "fb-checkpresence": 1.4.2 , installed 1.4.2
Adapter    "feiertage"    : 1.4.0    , installed 1.4.0
Adapter    "flot"         : 1.12.0   , installed 1.12.0
Adapter    "history"      : 4.0.0    , installed 4.0.0
Adapter    "hm-rega"      : 5.1.0    , installed 5.1.0
Adapter    "hm-rpc"       : 3.0.2    , installed 3.0.2
Adapter    "homekit-controller": 0.5.11, installed 0.5.11
Adapter    "ical"         : 1.20.1   , installed 1.20.1
Adapter    "icons-addictive-flavour-png": 0.1.0, installed 0.1.0
Adapter    "icons-fatcow-hosting": 0.1.0, installed 0.1.0
Adapter    "icons-material-png": 0.1.0, installed 0.1.0
Adapter    "icons-material-svg": 0.1.0, installed 0.1.0
Adapter    "icons-mfd-png": 1.2.1    , installed 1.2.1
Adapter    "icons-mfd-svg": 1.2.0    , installed 1.2.0
Adapter    "icons-open-icon-library-png": 0.1.2, installed 0.1.2
Adapter    "icons-smarthome": 1.0.0  , installed 1.0.0
Adapter    "icons-ultimate-png": 1.0.1, installed 1.0.1
Adapter    "influxdb"     : 4.0.2    , installed 4.0.2
Adapter    "javascript"   : 9.2.2    , installed 9.2.2
Controller "js-controller": 7.1.2    , installed 7.1.2
Adapter    "melcloud"     : 3.0.4    , installed 3.0.4
Adapter    "nina"         : 0.0.26   , installed 0.0.26
Adapter    "onvif"        : 1.1.4    , installed 1.1.4
Adapter    "radar-trap"   : 2.2.2    , installed 2.2.2
Adapter    "reolink"      : 1.4.2    , installed 1.4.2
Adapter    "residents"    : 1.1.1    , installed 1.1.1
Adapter    "roborock"     : 0.7.0    , installed 0.7.0
Adapter    "rpi2"         : 3.0.2    , installed 3.0.2
Adapter    "shelly"       : 10.6.1   , installed 10.6.1
Adapter    "smartcontrol" : 2.0.1    , installed 2.0.1
Adapter    "smartthings"  : 0.3.0    , installed 0.3.0
Adapter    "socketio"     : 7.1.3    , installed 7.1.3
Adapter    "solarmanpv"   : 0.7.3    , installed 0.7.3
Adapter    "sourceanalytix": 0.4.14  , installed 0.4.14
Adapter    "sprinklecontrol": 1.0.5  , installed 1.0.5
Adapter    "tankerkoenig" : 3.4.0    , installed 3.4.0
Adapter    "telegram"     : 4.1.0    , installed 4.1.0
Adapter    "tr-064"       : 4.3.0    , installed 4.3.0
Adapter    "tuya"         : 3.17.0   , installed 3.17.0
Adapter    "unifi"        : 0.7.0    , installed 0.7.0
Adapter    "unifi-protect": 1.0.1    , installed 1.0.1
Adapter    "virtualpowermeter": 1.5.0, installed 1.5.0
Adapter    "vis"          : 1.5.6    , installed 1.5.6
Adapter    "vis-2"        : 2.13.19  , installed 2.13.19
Adapter    "vis-2-widgets-radar-trap": 2.3.3, installed 2.3.3
Adapter    "vis-bars"     : 0.1.4    , installed 0.1.4
Adapter    "vis-colorpicker": 2.1.0  , installed 2.1.0
Adapter    "vis-fancyswitch": 1.1.0  , installed 1.1.0
Adapter    "vis-history"  : 1.0.0    , installed 1.0.0
Adapter    "vis-hqwidgets": 1.6.1    , installed 1.6.1
Adapter    "vis-icontwo"  : 2.11.3   , installed 2.11.3
Adapter    "vis-inventwo" : 3.3.5    , installed 3.3.5
Adapter    "vis-jqui-mfd" : 1.1.3    , installed 1.1.3
Adapter    "vis-justgage" : 2.1.7    , installed 2.1.7
Adapter    "vis-map"      : 1.1.2    , installed 1.1.2
Adapter    "vis-material-advanced": 1.7.4, installed 1.7.4
Adapter    "vis-materialdesign": 0.5.9, installed 0.5.9
Adapter    "vis-metro"    : 1.2.0    , installed 1.2.0
Adapter    "vis-plumb"    : 1.0.2    , installed 1.0.2
Adapter    "vis-rgraph"   : 0.0.2    , installed 0.0.2
Adapter    "vw-connect"   : 0.8.3    , installed 0.8.1  [Updatable]
Adapter    "web"          : 8.1.0    , installed 8.1.0
Adapter    "whatsapp-cmb" : 0.3.0    , installed 0.3.0
Adapter    "worx"         : 3.3.0    , installed 3.3.0
Adapter    "ws"           : 4.1.0    , installed 4.1.0
Adapter    "yahka"        : 1.1.6    , installed 1.1.6
Adapter    "zigbee"       : 3.4.3    , installed 3.4.3
Adapter    "zigbee2mqtt"  : 3.2.1    , installed 3.2.1

Objects and States
Please stand by - This may take a while
Objects:        36090
States:         30856

*** OS-Repositories and Updates ***
Hit:1 http://deb.debian.org/debian trixie InRelease
Hit:2 http://deb.debian.org/debian trixie-updates InRelease
Hit:3 http://archive.raspberrypi.com/debian trixie InRelease
Hit:4 http://deb.debian.org/debian-security trixie-security InRelease
Hit:5 https://deb.nodesource.com/node_22.x nodistro InRelease
Reading package lists...
Pending systemupdates: 0

*** Listening Ports ***
Active Internet connections (only servers)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       User       Inode      PID/Program name
tcp        0      0 192.168.178.144:8082    0.0.0.0:*               LISTEN      1001       19985      3704/io.web.0
tcp        0      0 192.168.178.144:8083    0.0.0.0:*               LISTEN      1001       22167      3721/io.web.1
tcp        0      0 192.168.178.144:8086    0.0.0.0:*               LISTEN      1001       21039      3512/io.socketio.0
tcp        0      0 0.0.0.0:43923           0.0.0.0:*               LISTEN      1001       18821      3214/io.yahka.0
tcp        0      0 192.168.178.144:2001    0.0.0.0:*               LISTEN      1001       17988      3021/io.hm-rpc.0
tcp        0      0 192.168.178.144:2010    0.0.0.0:*               LISTEN      1001       18088      3068/io.hm-rpc.2
tcp        0      0 127.0.0.1:9000          0.0.0.0:*               LISTEN      1001       16901      2851/iobroker.js-co
tcp        0      0 127.0.0.1:9001          0.0.0.0:*               LISTEN      1001       15249      2851/iobroker.js-co
tcp        0      0 0.0.0.0:111             0.0.0.0:*               LISTEN      0          265        1/init
tcp        0      0 0.0.0.0:22              0.0.0.0:*               LISTEN      0          9325       860/sshd: /usr/sbin
tcp        0      0 192.168.178.144:8701    0.0.0.0:*               LISTEN      1001       16223      3034/io.hm-rpc.1
tcp6       0      0 :::8085                 :::*                    LISTEN      1001       22531      3737/io.ws.0
tcp6       0      0 :::8084                 :::*                    LISTEN      1001       19879      3524/io.socketio.1
tcp6       0      0 :::8081                 :::*                    LISTEN      1001       17822      2879/io.admin.0
tcp6       0      0 :::111                  :::*                    LISTEN      0          1206       1/init
tcp6       0      0 :::22                   :::*                    LISTEN      0          9335       860/sshd: /usr/sbin
udp        0      0 0.0.0.0:111             0.0.0.0:*                           0          5511       1/init
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           101        1911       645/avahi-daemon: r
udp        0      0 0.0.0.0:5683            0.0.0.0:*                           1001       18874      3117/io.shelly.0
udp        0      0 0.0.0.0:39001           0.0.0.0:*                           101        1913       645/avahi-daemon: r
udp        0      0 0.0.0.0:6666            0.0.0.0:*                           1001       19043      3125/io.tuya.0
udp        0      0 0.0.0.0:6667            0.0.0.0:*                           1001       19044      3125/io.tuya.0
udp6       0      0 :::111                  :::*                                0          5512       1/init
udp6       0      0 fe80::3474:42d7:a07:546 :::*                                0          8348       699/NetworkManager
udp6       0      0 :::5353                 :::*                                101        1912       645/avahi-daemon: r
udp6       0      0 :::59000                :::*                                101        1914       645/avahi-daemon: r

*** Log File - Last 25 Lines ***

2026-05-10 22:55:28.844  - info: dwd.0 (4317) Terminated (ADAPTER_REQUESTED_TERMINATION): Without reason
2026-05-10 22:55:29.393  - info: host.RasPiIobroker instance system.adapter.dwd.0 having pid 4317 terminated with code 11 (ADAPTER_REQUESTED_TERMINATION)
2026-05-10 22:55:48.086  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.194:6668
2026-05-10 22:55:48.310  - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.53:6668
2026-05-10 22:55:50.902  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Connect locally to device
2026-05-10 22:55:50.902  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg Init with IP=192.168.178.194, Key=d5R&$cSpUI/[yvX#, Version=3.3
2026-05-10 22:55:53.974  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.194:6668
2026-05-10 22:56:17.046  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.194:6668
2026-05-10 22:56:51.382  - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.53:6668
2026-05-10 22:56:54.156  - info: tuya.0 (3125) bfacf54b96372f497255jg: Connect locally to device
2026-05-10 22:56:54.156  - info: tuya.0 (3125) bfacf54b96372f497255jg Init with IP=192.168.178.53, Key=gd/V|.sWrld+{7Bp, Version=3.3
2026-05-10 22:56:57.239  - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.53:6668
2026-05-10 22:57:00.118  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.194:6668
2026-05-10 22:57:20.310  - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.53:6668
2026-05-10 22:58:03.190  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.194:6668
2026-05-10 22:58:03.382  - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.53:6668
2026-05-10 22:58:05.959  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Connect locally to device
2026-05-10 22:58:05.960  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg Init with IP=192.168.178.194, Key=d5R&$cSpUI/[yvX#, Version=3.3
2026-05-10 22:58:09.014  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.194:6668
2026-05-10 22:58:32.086  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (3): connect EHOSTUNREACH 192.168.178.194:6668
2026-05-10 22:59:06.463  - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (7): connect EHOSTUNREACH 192.168.178.53:6668
2026-05-10 22:59:10.969  - info: tuya.0 (3125) bfacf54b96372f497255jg: Connect locally to device
2026-05-10 22:59:10.974  - info: tuya.0 (3125) bfacf54b96372f497255jg Init with IP=192.168.178.53, Key=gd/V|.sWrld+{7Bp, Version=3.3
2026-05-10 22:59:14.038  - info: tuya.0 (3125) bfacf54b96372f497255jg: Error on Reconnect (1): connect EHOSTUNREACH 192.168.178.53:6668
2026-05-10 22:59:15.163  - info: tuya.0 (3125) bf883cc2b4e69f7ed901gg: Error on Reconnect (5): connect EHOSTUNREACH 192.168.178.194:6668

============ Mark until here for C&P =============

iob diag has finished.

[Thomas Braun]

@Würfel

Da fehlt der Anfang.

[Würfel]

Oh Sorry. Sollte nun komplett sein.

[Thomas Braun]

@Würfel

Das schaut soweit i. O. aus.
Ich würde wohl statt des Beta/Latest-Reppo da stable verwenden.

[Würfel]

@Thomas-Braun Kann ich das einfach in den Basiseinstellungen anklicken und speichern oder mache ich mir da eine neue Baustelle auf?
Upgrade automatisch?

[Thomas Braun]

@Würfel

Die Quellen kannst du in den Einstellungen ändern.
Von automatischen Upgrades lasse ich die Finger, ich sehe gerne kommen, was da aktualisiert wird.

[Würfel]

Ok Danke